path: root/modules/fdlibm/src/math_private.h

/*
 * ====================================================
 * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
 *
 * Developed at SunPro, a Sun Microsystems, Inc. business.
 * Permission to use, copy, modify, and distribute this
 * software is freely granted, provided that this notice
 * is preserved.
 * ====================================================
 */

/*
 * from: @(#)fdlibm.h 5.1 93/09/24
 * $FreeBSD$
 */

#ifndef _MATH_PRIVATE_H_
#define	_MATH_PRIVATE_H_

#include <cfloat>
#include <stdint.h>
#include <sys/types.h>

#include "fdlibm.h"

#include "mozilla/EndianUtils.h"

/*
 * The original fdlibm code used statements like:
 *	n0 = ((*(int*)&one)>>29)^1;		* index of high word *
 *	ix0 = *(n0+(int*)&x);			* high word of x *
 *	ix1 = *((1-n0)+(int*)&x);		* low word of x *
 * to dig two 32 bit words out of the 64 bit IEEE floating point
 * value.  That is non-ANSI, and, moreover, the gcc instruction
 * scheduler gets it wrong.  We instead use the following macros.
 * Unlike the original code, we determine the endianness at compile
 * time, not at run time; I don't see much benefit to selecting
 * endianness at run time.
 */

#ifndef u_int32_t
#define u_int32_t uint32_t
#endif
#ifndef u_int64_t
#define u_int64_t uint64_t
#endif

/* A union which permits us to convert between a long double and
   four 32 bit ints.  */

#if MOZ_BIG_ENDIAN

typedef union
{
  long double value;
  struct {
    u_int32_t mswhi;
    u_int32_t mswlo;
    u_int32_t lswhi;
    u_int32_t lswlo;
  } parts32;
  struct {
    u_int64_t msw;
    u_int64_t lsw;
  } parts64;
} ieee_quad_shape_type;

#endif

#if MOZ_LITTLE_ENDIAN

typedef union
{
  long double value;
  struct {
    u_int32_t lswlo;
    u_int32_t lswhi;
    u_int32_t mswlo;
    u_int32_t mswhi;
  } parts32;
  struct {
    u_int64_t lsw;
    u_int64_t msw;
  } parts64;
} ieee_quad_shape_type;

#endif

/*
 * A union which permits us to convert between a double and two 32 bit
 * ints.
 */

#if MOZ_BIG_ENDIAN

typedef union
{
  double value;
  struct
  {
    u_int32_t msw;
    u_int32_t lsw;
  } parts;
  struct
  {
    u_int64_t w;
  } xparts;
} ieee_double_shape_type;

#endif

#if MOZ_LITTLE_ENDIAN

typedef union
{
  double value;
  struct
  {
    u_int32_t lsw;
    u_int32_t msw;
  } parts;
  struct
  {
    u_int64_t w;
  } xparts;
} ieee_double_shape_type;

#endif

/* Get two 32 bit ints from a double.  */

#define EXTRACT_WORDS(ix0,ix1,d)				\
do {								\
  ieee_double_shape_type ew_u;					\
  ew_u.value = (d);						\
  (ix0) = ew_u.parts.msw;					\
  (ix1) = ew_u.parts.lsw;					\
} while (0)

/* Get a 64-bit int from a double. */
#define EXTRACT_WORD64(ix,d)					\
do {								\
  ieee_double_shape_type ew_u;					\
  ew_u.value = (d);						\
  (ix) = ew_u.xparts.w;						\
} while (0)

/* Get the more significant 32 bit int from a double.  */

#define GET_HIGH_WORD(i,d)					\
do {								\
  ieee_double_shape_type gh_u;					\
  gh_u.value = (d);						\
  (i) = gh_u.parts.msw;						\
} while (0)

/* Get the less significant 32 bit int from a double.  */

#define GET_LOW_WORD(i,d)					\
do {								\
  ieee_double_shape_type gl_u;					\
  gl_u.value = (d);						\
  (i) = gl_u.parts.lsw;						\
} while (0)

/* Set a double from two 32 bit ints.  */

#define INSERT_WORDS(d,ix0,ix1)					\
do {								\
  ieee_double_shape_type iw_u;					\
  iw_u.parts.msw = (ix0);					\
  iw_u.parts.lsw = (ix1);					\
  (d) = iw_u.value;						\
} while (0)

/* Set a double from a 64-bit int. */
#define INSERT_WORD64(d,ix)					\
do {								\
  ieee_double_shape_type iw_u;					\
  iw_u.xparts.w = (ix);						\
  (d) = iw_u.value;						\
} while (0)

/* Set the more significant 32 bits of a double from an int.  */

#define SET_HIGH_WORD(d,v)					\
do {								\
  ieee_double_shape_type sh_u;					\
  sh_u.value = (d);						\
  sh_u.parts.msw = (v);						\
  (d) = sh_u.value;						\
} while (0)

/* Set the less significant 32 bits of a double from an int.  */

#define SET_LOW_WORD(d,v)					\
do {								\
  ieee_double_shape_type sl_u;					\
  sl_u.value = (d);						\
  sl_u.parts.lsw = (v);						\
  (d) = sl_u.value;						\
} while (0)

/*
 * A union which permits us to convert between a float and a 32 bit
 * int.
 */

typedef union
{
  float value;
  /* FIXME: Assumes 32 bit int.  */
  unsigned int word;
} ieee_float_shape_type;

/* Get a 32 bit int from a float.  */

#define GET_FLOAT_WORD(i,d)					\
do {								\
  ieee_float_shape_type gf_u;					\
  gf_u.value = (d);						\
  (i) = gf_u.word;						\
} while (0)

/* Set a float from a 32 bit int.  */

#define SET_FLOAT_WORD(d,i)					\
do {								\
  ieee_float_shape_type sf_u;					\
  sf_u.word = (i);						\
  (d) = sf_u.value;						\
} while (0)

/*
 * Get expsign and mantissa as 16 bit and 64 bit ints from an 80 bit long
 * double.
 */

#define	EXTRACT_LDBL80_WORDS(ix0,ix1,d)				\
do {								\
  union IEEEl2bits ew_u;					\
  ew_u.e = (d);							\
  (ix0) = ew_u.xbits.expsign;					\
  (ix1) = ew_u.xbits.man;					\
} while (0)

/*
 * Get expsign and mantissa as one 16 bit and two 64 bit ints from a 128 bit
 * long double.
 */

#define	EXTRACT_LDBL128_WORDS(ix0,ix1,ix2,d)			\
do {								\
  union IEEEl2bits ew_u;					\
  ew_u.e = (d);							\
  (ix0) = ew_u.xbits.expsign;					\
  (ix1) = ew_u.xbits.manh;					\
  (ix2) = ew_u.xbits.manl;					\
} while (0)

/* Get expsign as a 16 bit int from a long double.  */

#define	GET_LDBL_EXPSIGN(i,d)					\
do {								\
  union IEEEl2bits ge_u;					\
  ge_u.e = (d);							\
  (i) = ge_u.xbits.expsign;					\
} while (0)

/*
 * Set an 80 bit long double from a 16 bit int expsign and a 64 bit int
 * mantissa.
 */

#define	INSERT_LDBL80_WORDS(d,ix0,ix1)				\
do {								\
  union IEEEl2bits iw_u;					\
  iw_u.xbits.expsign = (ix0);					\
  iw_u.xbits.man = (ix1);					\
  (d) = iw_u.e;							\
} while (0)

/*
 * Set a 128 bit long double from a 16 bit int expsign and two 64 bit ints
 * comprising the mantissa.
 */

#define	INSERT_LDBL128_WORDS(d,ix0,ix1,ix2)			\
do {								\
  union IEEEl2bits iw_u;					\
  iw_u.xbits.expsign = (ix0);					\
  iw_u.xbits.manh = (ix1);					\
  iw_u.xbits.manl = (ix2);					\
  (d) = iw_u.e;							\
} while (0)

/* Set expsign of a long double from a 16 bit int.  */

#define	SET_LDBL_EXPSIGN(d,v)					\
do {								\
  union IEEEl2bits se_u;					\
  se_u.e = (d);							\
  se_u.xbits.expsign = (v);					\
  (d) = se_u.e;							\
} while (0)

#ifdef __i386__
/* Long double constants are broken on i386. */
#define	LD80C(m, ex, v) {						\
	.xbits.man = __CONCAT(m, ULL),					\
	.xbits.expsign = (0x3fff + (ex)) | ((v) < 0 ? 0x8000 : 0),	\
}
#else
/* The above works on non-i386 too, but we use this to check v. */
#define	LD80C(m, ex, v)	{ .e = (v), }
#endif

#ifdef FLT_EVAL_METHOD
/*
 * Attempt to get strict C99 semantics for assignment with non-C99 compilers.
 */
#if !defined(_MSC_VER) && (FLT_EVAL_METHOD == 0 || __GNUC__ == 0)
#define	STRICT_ASSIGN(type, lval, rval)	((lval) = (rval))
#else
#define	STRICT_ASSIGN(type, lval, rval) do {	\
	volatile type __lval;			\
						\
	if (sizeof(type) >= sizeof(long double))	\
		(lval) = (rval);		\
	else {					\
		__lval = (rval);		\
		(lval) = __lval;		\
	}					\
} while (0)
#endif
#else
#define	STRICT_ASSIGN(type, lval, rval) do {	\
	volatile type __lval;			\
						\
	if (sizeof(type) >= sizeof(long double))	\
		(lval) = (rval);		\
	else {					\
		__lval = (rval);		\
		(lval) = __lval;		\
	}					\
} while (0)
#endif /* FLT_EVAL_METHOD */

/* Support switching the mode to FP_PE if necessary. */
#if defined(__i386__) && !defined(NO_FPSETPREC)
#define	ENTERI() ENTERIT(long double)
#define	ENTERIT(returntype)			\
	returntype __retval;			\
	fp_prec_t __oprec;			\
						\
	if ((__oprec = fpgetprec()) != FP_PE)	\
		fpsetprec(FP_PE)
#define	RETURNI(x) do {				\
	__retval = (x);				\
	if (__oprec != FP_PE)			\
		fpsetprec(__oprec);		\
	RETURNF(__retval);			\
} while (0)
#define	ENTERV()				\
	fp_prec_t __oprec;			\
						\
	if ((__oprec = fpgetprec()) != FP_PE)	\
		fpsetprec(FP_PE)
#define	RETURNV() do {				\
	if (__oprec != FP_PE)			\
		fpsetprec(__oprec);		\
	return;			\
} while (0)
#else
#define	ENTERI()
#define	ENTERIT(x)
#define	RETURNI(x)	RETURNF(x)
#define	ENTERV()
#define	RETURNV()	return
#endif

/* Default return statement if hack*_t() is not used. */
#define      RETURNF(v)      return (v)

/*
 * 2sum gives the same result as 2sumF without requiring |a| >= |b| or
 * a == 0, but is slower.
 */
#define	_2sum(a, b) do {	\
	__typeof(a) __s, __w;	\
				\
	__w = (a) + (b);	\
	__s = __w - (a);	\
	(b) = ((a) - (__w - __s)) + ((b) - __s); \
	(a) = __w;		\
} while (0)

/*
 * 2sumF algorithm.
 *
 * "Normalize" the terms in the infinite-precision expression a + b for
 * the sum of 2 floating point values so that b is as small as possible
 * relative to 'a'.  (The resulting 'a' is the value of the expression in
 * the same precision as 'a' and the resulting b is the rounding error.)
 * |a| must be >= |b| or 0, b's type must be no larger than 'a's type, and
 * exponent overflow or underflow must not occur.  This uses a Theorem of
 * Dekker (1971).  See Knuth (1981) 4.2.2 Theorem C.  The name "TwoSum"
 * is apparently due to Skewchuk (1997).
 *
 * For this to always work, assignment of a + b to 'a' must not retain any
 * extra precision in a + b.  This is required by C standards but broken
 * in many compilers.  The brokenness cannot be worked around using
 * STRICT_ASSIGN() like we do elsewhere, since the efficiency of this
 * algorithm would be destroyed by non-null strict assignments.  (The
 * compilers are correct to be broken -- the efficiency of all floating
 * point code calculations would be destroyed similarly if they forced the
 * conversions.)
 *
 * Fortunately, a case that works well can usually be arranged by building
 * any extra precision into the type of 'a' -- 'a' should have type float_t,
 * double_t or long double.  b's type should be no larger than 'a's type.
 * Callers should use these types with scopes as large as possible, to
 * reduce their own extra-precision and efficiciency problems.  In
 * particular, they shouldn't convert back and forth just to call here.
 */
#ifdef DEBUG
#define	_2sumF(a, b) do {				\
	__typeof(a) __w;				\
	volatile __typeof(a) __ia, __ib, __r, __vw;	\
							\
	__ia = (a);					\
	__ib = (b);					\
	assert(__ia == 0 || fabsl(__ia) >= fabsl(__ib));	\
							\
	__w = (a) + (b);				\
	(b) = ((a) - __w) + (b);			\
	(a) = __w;					\
							\
	/* The next 2 assertions are weak if (a) is already long double. */ \
	assert((long double)__ia + __ib == (long double)(a) + (b));	\
	__vw = __ia + __ib;				\
	__r = __ia - __vw;				\
	__r += __ib;					\
	assert(__vw == (a) && __r == (b));		\
} while (0)
#else /* !DEBUG */
#define	_2sumF(a, b) do {	\
	__typeof(a) __w;	\
				\
	__w = (a) + (b);	\
	(b) = ((a) - __w) + (b); \
	(a) = __w;		\
} while (0)
#endif /* DEBUG */

/*
 * Set x += c, where x is represented in extra precision as a + b.
 * x must be sufficiently normalized and sufficiently larger than c,
 * and the result is then sufficiently normalized.
 *
 * The details of ordering are that |a| must be >= |c| (so that (a, c)
 * can be normalized without extra work to swap 'a' with c).  The details of
 * the normalization are that b must be small relative to the normalized 'a'.
 * Normalization of (a, c) makes the normalized c tiny relative to the
 * normalized a, so b remains small relative to 'a' in the result.  However,
 * b need not ever be tiny relative to 'a'.  For example, b might be about
 * 2**20 times smaller than 'a' to give about 20 extra bits of precision.
 * That is usually enough, and adding c (which by normalization is about
 * 2**53 times smaller than a) cannot change b significantly.  However,
 * cancellation of 'a' with c in normalization of (a, c) may reduce 'a'
 * significantly relative to b.  The caller must ensure that significant
 * cancellation doesn't occur, either by having c of the same sign as 'a',
 * or by having |c| a few percent smaller than |a|.  Pre-normalization of
 * (a, b) may help.
 *
 * This is is a variant of an algorithm of Kahan (see Knuth (1981) 4.2.2
 * exercise 19).  We gain considerable efficiency by requiring the terms to
 * be sufficiently normalized and sufficiently increasing.
 */
#define	_3sumF(a, b, c) do {	\
	__typeof(a) __tmp;	\
				\
	__tmp = (c);		\
	_2sumF(__tmp, (a));	\
	(b) += (a);		\
	(a) = __tmp;		\
} while (0)

/*
 * Common routine to process the arguments to nan(), nanf(), and nanl().
 */
void _scan_nan(uint32_t *__words, int __num_words, const char *__s);

/*
 * Mix 0, 1 or 2 NaNs.  First add 0 to each arg.  This normally just turns
 * signaling NaNs into quiet NaNs by setting a quiet bit.  We do this
 * because we want to never return a signaling NaN, and also because we
 * don't want the quiet bit to affect the result.  Then mix the converted
 * args using the specified operation.
 *
 * When one arg is NaN, the result is typically that arg quieted.  When both
 * args are NaNs, the result is typically the quietening of the arg whose
 * mantissa is largest after quietening.  When neither arg is NaN, the
 * result may be NaN because it is indeterminate, or finite for subsequent
 * construction of a NaN as the indeterminate 0.0L/0.0L.
 *
 * Technical complications: the result in bits after rounding to the final
 * precision might depend on the runtime precision and/or on compiler
 * optimizations, especially when different register sets are used for
 * different precisions.  Try to make the result not depend on at least the
 * runtime precision by always doing the main mixing step in long double
 * precision.  Try to reduce dependencies on optimizations by adding the
 * the 0's in different precisions (unless everything is in long double
 * precision).
 */
#define	nan_mix(x, y)		(nan_mix_op((x), (y), +))
#define	nan_mix_op(x, y, op)	(((x) + 0.0L) op ((y) + 0))

#ifdef _COMPLEX_H

/*
 * C99 specifies that complex numbers have the same representation as
 * an array of two elements, where the first element is the real part
 * and the second element is the imaginary part.
 */
typedef union {
	float complex f;
	float a[2];
} float_complex;
typedef union {
	double complex f;
	double a[2];
} double_complex;
typedef union {
	long double complex f;
	long double a[2];
} long_double_complex;
#define	REALPART(z)	((z).a[0])
#define	IMAGPART(z)	((z).a[1])

/*
 * Inline functions that can be used to construct complex values.
 *
 * The C99 standard intends x+I*y to be used for this, but x+I*y is
 * currently unusable in general since gcc introduces many overflow,
 * underflow, sign and efficiency bugs by rewriting I*y as
 * (0.0+I)*(y+0.0*I) and laboriously computing the full complex product.
 * In particular, I*Inf is corrupted to NaN+I*Inf, and I*-0 is corrupted
 * to -0.0+I*0.0.
 *
 * The C11 standard introduced the macros CMPLX(), CMPLXF() and CMPLXL()
 * to construct complex values.  Compilers that conform to the C99
 * standard require the following functions to avoid the above issues.
 */

#ifndef CMPLXF
static __inline float complex
CMPLXF(float x, float y)
{
	float_complex z;

	REALPART(z) = x;
	IMAGPART(z) = y;
	return (z.f);
}
#endif

#ifndef CMPLX
static __inline double complex
CMPLX(double x, double y)
{
	double_complex z;

	REALPART(z) = x;
	IMAGPART(z) = y;
	return (z.f);
}
#endif

#ifndef CMPLXL
static __inline long double complex
CMPLXL(long double x, long double y)
{
	long_double_complex z;

	REALPART(z) = x;
	IMAGPART(z) = y;
	return (z.f);
}
#endif

#endif /* _COMPLEX_H */
 
#ifdef DEBUG
#if defined(__amd64__) || defined(__i386__)
#define	breakpoint()	asm("int $3")
#else
#include <signal.h>

#define	breakpoint()	raise(SIGTRAP)
#endif
#endif

/* Write a pari script to test things externally. */
#ifdef DOPRINT
#include <stdio.h>

#ifndef DOPRINT_SWIZZLE
#define	DOPRINT_SWIZZLE		0
#endif

#ifdef DOPRINT_LD80

#define	DOPRINT_START(xp) do {						\
	uint64_t __lx;							\
	uint16_t __hx;							\
									\
	/* Hack to give more-problematic args. */			\
	EXTRACT_LDBL80_WORDS(__hx, __lx, *xp);				\
	__lx ^= DOPRINT_SWIZZLE;					\
	INSERT_LDBL80_WORDS(*xp, __hx, __lx);				\
	printf("x = %.21Lg; ", (long double)*xp);			\
} while (0)
#define	DOPRINT_END1(v)							\
	printf("y = %.21Lg; z = 0; show(x, y, z);\n", (long double)(v))
#define	DOPRINT_END2(hi, lo)						\
	printf("y = %.21Lg; z = %.21Lg; show(x, y, z);\n",		\
	    (long double)(hi), (long double)(lo))

#elif defined(DOPRINT_D64)

#define	DOPRINT_START(xp) do {						\
	uint32_t __hx, __lx;						\
									\
	EXTRACT_WORDS(__hx, __lx, *xp);					\
	__lx ^= DOPRINT_SWIZZLE;					\
	INSERT_WORDS(*xp, __hx, __lx);					\
	printf("x = %.21Lg; ", (long double)*xp);			\
} while (0)
#define	DOPRINT_END1(v)							\
	printf("y = %.21Lg; z = 0; show(x, y, z);\n", (long double)(v))
#define	DOPRINT_END2(hi, lo)						\
	printf("y = %.21Lg; z = %.21Lg; show(x, y, z);\n",		\
	    (long double)(hi), (long double)(lo))

#elif defined(DOPRINT_F32)

#define	DOPRINT_START(xp) do {						\
	uint32_t __hx;							\
									\
	GET_FLOAT_WORD(__hx, *xp);					\
	__hx ^= DOPRINT_SWIZZLE;					\
	SET_FLOAT_WORD(*xp, __hx);					\
	printf("x = %.21Lg; ", (long double)*xp);			\
} while (0)
#define	DOPRINT_END1(v)							\
	printf("y = %.21Lg; z = 0; show(x, y, z);\n", (long double)(v))
#define	DOPRINT_END2(hi, lo)						\
	printf("y = %.21Lg; z = %.21Lg; show(x, y, z);\n",		\
	    (long double)(hi), (long double)(lo))

#else /* !DOPRINT_LD80 && !DOPRINT_D64 (LD128 only) */

#ifndef DOPRINT_SWIZZLE_HIGH
#define	DOPRINT_SWIZZLE_HIGH	0
#endif

#define	DOPRINT_START(xp) do {						\
	uint64_t __lx, __llx;						\
	uint16_t __hx;							\
									\
	EXTRACT_LDBL128_WORDS(__hx, __lx, __llx, *xp);			\
	__llx ^= DOPRINT_SWIZZLE;					\
	__lx ^= DOPRINT_SWIZZLE_HIGH;					\
	INSERT_LDBL128_WORDS(*xp, __hx, __lx, __llx);			\
	printf("x = %.36Lg; ", (long double)*xp);					\
} while (0)
#define	DOPRINT_END1(v)							\
	printf("y = %.36Lg; z = 0; show(x, y, z);\n", (long double)(v))
#define	DOPRINT_END2(hi, lo)						\
	printf("y = %.36Lg; z = %.36Lg; show(x, y, z);\n",		\
	    (long double)(hi), (long double)(lo))

#endif /* DOPRINT_LD80 */

#else /* !DOPRINT */
#define	DOPRINT_START(xp)
#define	DOPRINT_END1(v)
#define	DOPRINT_END2(hi, lo)
#endif /* DOPRINT */

#define	RETURNP(x) do {			\
	DOPRINT_END1(x);		\
	RETURNF(x);			\
} while (0)
#define	RETURNPI(x) do {		\
	DOPRINT_END1(x);		\
	RETURNI(x);			\
} while (0)
#define	RETURN2P(x, y) do {		\
	DOPRINT_END2((x), (y));		\
	RETURNF((x) + (y));		\
} while (0)
#define	RETURN2PI(x, y) do {		\
	DOPRINT_END2((x), (y));		\
	RETURNI((x) + (y));		\
} while (0)
#ifdef STRUCT_RETURN
#define	RETURNSP(rp) do {		\
	if (!(rp)->lo_set)		\
		RETURNP((rp)->hi);	\
	RETURN2P((rp)->hi, (rp)->lo);	\
} while (0)
#define	RETURNSPI(rp) do {		\
	if (!(rp)->lo_set)		\
		RETURNPI((rp)->hi);	\
	RETURN2PI((rp)->hi, (rp)->lo);	\
} while (0)
#endif
#define	SUM2P(x, y) ({			\
	const __typeof (x) __x = (x);	\
	const __typeof (y) __y = (y);	\
					\
	DOPRINT_END2(__x, __y);		\
	__x + __y;			\
})

/*
 * ieee style elementary functions
 *
 * We rename functions here to improve other sources' diffability
 * against fdlibm.
 */
#define	__ieee754_sqrt	sqrt
#define	__ieee754_acos	acos
#define	__ieee754_acosh	acosh
#define	__ieee754_log	log
#define	__ieee754_log2	log2
#define	__ieee754_atanh	atanh
#define	__ieee754_asin	asin
#define	__ieee754_atan2	atan2
#define	__ieee754_exp	exp
#define	__ieee754_cosh	cosh
#define	__ieee754_fmod	fmod
#define	__ieee754_pow	pow
#define	__ieee754_lgamma lgamma
#define	__ieee754_gamma	gamma
#define	__ieee754_lgamma_r lgamma_r
#define	__ieee754_gamma_r gamma_r
#define	__ieee754_log10	log10
#define	__ieee754_sinh	sinh
#define	__ieee754_hypot	hypot
#define	__ieee754_j0	j0
#define	__ieee754_j1	j1
#define	__ieee754_y0	y0
#define	__ieee754_y1	y1
#define	__ieee754_jn	jn
#define	__ieee754_yn	yn
#define	__ieee754_remainder remainder
#define	__ieee754_scalb	scalb
#define	__ieee754_sqrtf	sqrtf
#define	__ieee754_acosf	acosf
#define	__ieee754_acoshf acoshf
#define	__ieee754_logf	logf
#define	__ieee754_atanhf atanhf
#define	__ieee754_asinf	asinf
#define	__ieee754_atan2f atan2f
#define	__ieee754_expf	expf
#define	__ieee754_coshf	coshf
#define	__ieee754_fmodf	fmodf
#define	__ieee754_powf	powf
#define	__ieee754_lgammaf lgammaf
#define	__ieee754_gammaf gammaf
#define	__ieee754_lgammaf_r lgammaf_r
#define	__ieee754_gammaf_r gammaf_r
#define	__ieee754_log10f log10f
#define	__ieee754_log2f log2f
#define	__ieee754_sinhf	sinhf
#define	__ieee754_hypotf hypotf
#define	__ieee754_j0f	j0f
#define	__ieee754_j1f	j1f
#define	__ieee754_y0f	y0f
#define	__ieee754_y1f	y1f
#define	__ieee754_jnf	jnf
#define	__ieee754_ynf	ynf
#define	__ieee754_remainderf remainderf
#define	__ieee754_scalbf scalbf

#define acos fdlibm::acos
#define asin fdlibm::asin
#define atan fdlibm::atan
#define atan2 fdlibm::atan2
#define cosh fdlibm::cosh
#define sinh fdlibm::sinh
#define tanh fdlibm::tanh
#define exp fdlibm::exp
#define log fdlibm::log
#define log10 fdlibm::log10
#define pow fdlibm::pow
#define ceil fdlibm::ceil
#define ceilf fdlibm::ceilf
#define fabs fdlibm::fabs
#define floor fdlibm::floor
#define acosh fdlibm::acosh
#define asinh fdlibm::asinh
#define atanh fdlibm::atanh
#define cbrt fdlibm::cbrt
#define expm1 fdlibm::expm1
#define hypot fdlibm::hypot
#define log1p fdlibm::log1p
#define log2 fdlibm::log2
#define scalb fdlibm::scalb
#define copysign fdlibm::copysign
#define scalbn fdlibm::scalbn
#define trunc fdlibm::trunc
#define truncf fdlibm::truncf
#define floorf fdlibm::floorf
#define nearbyint fdlibm::nearbyint
#define nearbyintf fdlibm::nearbyintf
#define rint fdlibm::rint
#define rintf fdlibm::rintf

/* fdlibm kernel function */
int	__kernel_rem_pio2(double*,double*,int,int,int);

/* double precision kernel functions */
#ifndef INLINE_REM_PIO2
int	__ieee754_rem_pio2(double,double*);
#endif
double	__kernel_sin(double,double,int);
double	__kernel_cos(double,double);
double	__kernel_tan(double,double,int);
double	__ldexp_exp(double,int);
#ifdef _COMPLEX_H
double complex __ldexp_cexp(double complex,int);
#endif

/* float precision kernel functions */
#ifndef INLINE_REM_PIO2F
int	__ieee754_rem_pio2f(float,double*);
#endif
#ifndef INLINE_KERNEL_SINDF
float	__kernel_sindf(double);
#endif
#ifndef INLINE_KERNEL_COSDF
float	__kernel_cosdf(double);
#endif
#ifndef INLINE_KERNEL_TANDF
float	__kernel_tandf(double,int);
#endif
float	__ldexp_expf(float,int);
#ifdef _COMPLEX_H
float complex __ldexp_cexpf(float complex,int);
#endif

/* long double precision kernel functions */
long double __kernel_sinl(long double, long double, int);
long double __kernel_cosl(long double, long double);
long double __kernel_tanl(long double, long double, int);

#endif /* !_MATH_PRIVATE_H_ */