Move aom source to a sub-directory under media/libaom

There is no damned reason to treat this differently than any other media lib given its license and there never was.

1 files changed, 0 insertions, 477 deletions

diff --git a/third_party/aom/test/tools_common.sh b/third_party/aom/test/tools_common.sh
deleted file mode 100755
index c08710606..000000000
--- a/third_party/aom/test/tools_common.sh
+++ /dev/null
@@ -1,477 +0,0 @@
-#!/bin/sh
-## Copyright (c) 2016, Alliance for Open Media. All rights reserved
-##
-## This source code is subject to the terms of the BSD 2 Clause License and
-## the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
-## was not distributed with this source code in the LICENSE file, you can
-## obtain it at www.aomedia.org/license/software. If the Alliance for Open
-## Media Patent License 1.0 was not distributed with this source code in the
-## PATENTS file, you can obtain it at www.aomedia.org/license/patent.
-##
-##  This file contains shell code shared by test scripts for libaom tools.
-
-# Use $AOM_TEST_TOOLS_COMMON_SH as a pseudo include guard.
-if [ -z "${AOM_TEST_TOOLS_COMMON_SH}" ]; then
-AOM_TEST_TOOLS_COMMON_SH=included
-
-set -e
-devnull='> /dev/null 2>&1'
-AOM_TEST_PREFIX=""
-
-elog() {
-  echo "$@" 1>&2
-}
-
-vlog() {
-  if [ "${AOM_TEST_VERBOSE_OUTPUT}" = "yes" ]; then
-    echo "$@"
-  fi
-}
-
-# Sets $AOM_TOOL_TEST to the name specified by positional parameter one.
-test_begin() {
-  AOM_TOOL_TEST="${1}"
-}
-
-# Clears the AOM_TOOL_TEST variable after confirming that $AOM_TOOL_TEST matches
-# positional parameter one.
-test_end() {
-  if [ "$1" != "${AOM_TOOL_TEST}" ]; then
-    echo "FAIL completed test mismatch!."
-    echo "  completed test: ${1}"
-    echo "  active test: ${AOM_TOOL_TEST}."
-    return 1
-  fi
-  AOM_TOOL_TEST='<unset>'
-}
-
-# Echoes the target configuration being tested.
-test_configuration_target() {
-  aom_config_c="${LIBAOM_CONFIG_PATH}/config/aom_config.c"
-  # Clean up the cfg pointer line from aom_config.c for easier re-use by
-  # someone examining a failure in the example tests.
-  # 1. Run grep on aom_config.c for cfg and limit the results to 1.
-  # 2. Split the line using ' = ' as separator.
-  # 3. Abuse sed to consume the leading " and trailing "; from the assignment
-  #    to the cfg pointer.
-  cmake_config=$(awk -F ' = ' '/cfg/ { print $NF; exit }' "${aom_config_c}" \
-    | sed -e s/\"// -e s/\"\;//)
-  echo cmake generated via command: cmake path/to/aom ${cmake_config}
-}
-
-# Trap function used for failure reports and tool output directory removal.
-# When the contents of $AOM_TOOL_TEST do not match the string '<unset>', reports
-# failure of test stored in $AOM_TOOL_TEST.
-cleanup() {
-  if [ -n "${AOM_TOOL_TEST}" ] && [ "${AOM_TOOL_TEST}" != '<unset>' ]; then
-    echo "FAIL: $AOM_TOOL_TEST"
-  fi
-  if [ "${AOM_TEST_PRESERVE_OUTPUT}" = "yes" ]; then
-    return
-  fi
-  if [ -n "${AOM_TEST_OUTPUT_DIR}" ] && [ -d "${AOM_TEST_OUTPUT_DIR}" ]; then
-    rm -rf "${AOM_TEST_OUTPUT_DIR}"
-  fi
-}
-
-# Echoes the version string assigned to the VERSION_STRING_NOSP variable defined
-# in $LIBAOM_CONFIG_PATH/config/aom_version.h to stdout.
-cmake_version() {
-  aom_version_h="${LIBAOM_CONFIG_PATH}/config/aom_version.h"
-
-  # Find VERSION_STRING_NOSP line, split it with '"' and print the next to last
-  # field to output the version string to stdout.
-  aom_version=$(awk -F \" '/VERSION_STRING_NOSP/ {print $(NF-1)}' \
-    "${aom_version_h}")
-  echo "v${aom_version}"
-}
-
-# Echoes current git version as reported by running 'git describe', or the
-# version used by the cmake build when git is unavailable.
-source_version() {
-  if git --version > /dev/null 2>&1; then
-    (cd "$(dirname "${0}")"
-    git describe)
-  else
-    cmake_version
-  fi
-}
-
-# Echoes warnings to stdout when source version and CMake build generated
-# version are out of sync.
-check_version_strings() {
-  cmake_version=$(cmake_version)
-  source_version=$(source_version)
-
-  if [ "${cmake_version}" != "${source_version}" ]; then
-    echo "Warning: version has changed since last cmake run."
-    vlog "  cmake version: ${cmake_version} version now: ${source_version}"
-  fi
-}
-
-# $1 is the name of an environment variable containing a directory name to
-# test.
-test_env_var_dir() {
-  local dir=$(eval echo "\${$1}")
-  if [ ! -d "${dir}" ]; then
-    elog "'${dir}': No such directory"
-    elog "The $1 environment variable must be set to a valid directory."
-    return 1
-  fi
-}
-
-# This script requires that the LIBAOM_BIN_PATH, LIBAOM_CONFIG_PATH, and
-# LIBAOM_TEST_DATA_PATH variables are in the environment: Confirm that
-# the variables are set and that they all evaluate to directory paths.
-verify_aom_test_environment() {
-  test_env_var_dir "LIBAOM_BIN_PATH" \
-    && test_env_var_dir "LIBAOM_CONFIG_PATH" \
-    && test_env_var_dir "LIBAOM_TEST_DATA_PATH"
-}
-
-# Greps aom_config.h in LIBAOM_CONFIG_PATH for positional parameter one, which
-# should be a LIBAOM preprocessor flag. Echoes yes to stdout when the feature
-# is available.
-aom_config_option_enabled() {
-  aom_config_option="${1}"
-  aom_config_file="${LIBAOM_CONFIG_PATH}/config/aom_config.h"
-  config_line=$(grep "${aom_config_option}" "${aom_config_file}")
-  if echo "${config_line}" | egrep -q '1$'; then
-    echo yes
-  fi
-}
-
-# Echoes yes when output of test_configuration_target() contains win32 or win64.
-is_windows_target() {
-  if test_configuration_target \
-     | grep -q -e win32 -e win64 > /dev/null 2>&1; then
-    echo yes
-  fi
-}
-
-# Echoes path to $1 when it's executable and exists in one of the directories
-# included in $tool_paths, or an empty string. Caller is responsible for testing
-# the string once the function returns.
-aom_tool_path() {
-  local tool_name="$1"
-  local root_path="${LIBAOM_BIN_PATH}"
-  local suffix="${AOM_TEST_EXE_SUFFIX}"
-  local tool_paths="\
-    ${root_path}/${tool_name}${suffix} \
-    ${root_path}/../${tool_name}${suffix} \
-    ${root_path}/tools/${tool_name}${suffix} \
-    ${root_path}/../tools/${tool_name}${suffix}"
-
-  local toolpath=""
-
-  for tool_path in ${tool_paths}; do
-    if [ -x "${tool_path}" ] && [ -f "${tool_path}" ]; then
-      echo "${tool_path}"
-      return 0
-    fi
-  done
-
-  return 1
-}
-
-# Echoes yes to stdout when the file named by positional parameter one exists
-# in LIBAOM_BIN_PATH, and is executable.
-aom_tool_available() {
-  local tool_name="$1"
-  local tool="${LIBAOM_BIN_PATH}/${tool_name}${AOM_TEST_EXE_SUFFIX}"
-  [ -x "${tool}" ] && echo yes
-}
-
-# Echoes yes to stdout when aom_config_option_enabled() reports yes for
-# CONFIG_AV1_DECODER.
-av1_decode_available() {
-  [ "$(aom_config_option_enabled CONFIG_AV1_DECODER)" = "yes" ] && echo yes
-}
-
-# Echoes yes to stdout when aom_config_option_enabled() reports yes for
-# CONFIG_AV1_ENCODER.
-av1_encode_available() {
-  [ "$(aom_config_option_enabled CONFIG_AV1_ENCODER)" = "yes" ] && echo yes
-}
-
-# Echoes "fast" encode params for use with aomenc.
-aomenc_encode_test_fast_params() {
-  echo "--cpu-used=1
-        --limit=${AV1_ENCODE_TEST_FRAME_LIMIT}
-        --lag-in-frames=0
-        --test-decode=fatal"
-}
-
-# Echoes yes to stdout when aom_config_option_enabled() reports yes for
-# CONFIG_WEBM_IO.
-webm_io_available() {
-  [ "$(aom_config_option_enabled CONFIG_WEBM_IO)" = "yes" ] && echo yes
-}
-
-# Filters strings from $1 using the filter specified by $2. Filter behavior
-# depends on the presence of $3. When $3 is present, strings that match the
-# filter are excluded. When $3 is omitted, strings matching the filter are
-# included.
-# The filtered result is echoed to stdout.
-filter_strings() {
-  strings=${1}
-  filter=${2}
-  exclude=${3}
-
-  if [ -n "${exclude}" ]; then
-    # When positional parameter three exists the caller wants to remove strings.
-    # Tell grep to invert matches using the -v argument.
-    exclude='-v'
-  else
-    unset exclude
-  fi
-
-  if [ -n "${filter}" ]; then
-    for s in ${strings}; do
-      if echo "${s}" | egrep -q ${exclude} "${filter}" > /dev/null 2>&1; then
-        filtered_strings="${filtered_strings} ${s}"
-      fi
-    done
-  else
-    filtered_strings="${strings}"
-  fi
-  echo "${filtered_strings}"
-}
-
-# Runs user test functions passed via positional parameters one and two.
-# Functions in positional parameter one are treated as environment verification
-# functions and are run unconditionally. Functions in positional parameter two
-# are run according to the rules specified in aom_test_usage().
-run_tests() {
-  local env_tests="verify_aom_test_environment $1"
-  local tests_to_filter="$2"
-  local test_name="${AOM_TEST_NAME}"
-
-  if [ -z "${test_name}" ]; then
-    test_name="$(basename "${0%.*}")"
-  fi
-
-  if [ "${AOM_TEST_RUN_DISABLED_TESTS}" != "yes" ]; then
-    # Filter out DISABLED tests.
-    tests_to_filter=$(filter_strings "${tests_to_filter}" ^DISABLED exclude)
-  fi
-
-  if [ -n "${AOM_TEST_FILTER}" ]; then
-    # Remove tests not matching the user's filter.
-    tests_to_filter=$(filter_strings "${tests_to_filter}" ${AOM_TEST_FILTER})
-  fi
-
-  # User requested test listing: Dump test names and return.
-  if [ "${AOM_TEST_LIST_TESTS}" = "yes" ]; then
-    for test_name in $tests_to_filter; do
-      echo ${test_name}
-    done
-    return
-  fi
-
-  # Don't bother with the environment tests if everything else was disabled.
-  [ -z "${tests_to_filter}" ] && return
-
-  # Combine environment and actual tests.
-  local tests_to_run="${env_tests} ${tests_to_filter}"
-
-  check_version_strings
-
-  # Run tests.
-  for test in ${tests_to_run}; do
-    test_begin "${test}"
-    vlog "  RUN  ${test}"
-    "${test}"
-    vlog "  PASS ${test}"
-    test_end "${test}"
-  done
-
-  local tested_config="$(test_configuration_target) @ $(source_version)"
-  echo "${test_name}: Done, all tests pass for ${tested_config}."
-}
-
-aom_test_usage() {
-cat << EOF
-  Usage: ${0##*/} [arguments]
-    --bin-path <path to libaom binaries directory>
-    --config-path <path to libaom config directory>
-    --filter <filter>: User test filter. Only tests matching filter are run.
-    --run-disabled-tests: Run disabled tests.
-    --help: Display this message and exit.
-    --test-data-path <path to libaom test data directory>
-    --show-program-output: Shows output from all programs being tested.
-    --prefix: Allows for a user specified prefix to be inserted before all test
-              programs. Grants the ability, for example, to run test programs
-              within valgrind.
-    --list-tests: List all test names and exit without actually running tests.
-    --verbose: Verbose output.
-
-    When the --bin-path option is not specified the script attempts to use
-    \$LIBAOM_BIN_PATH and then the current directory.
-
-    When the --config-path option is not specified the script attempts to use
-    \$LIBAOM_CONFIG_PATH and then the current directory.
-
-    When the -test-data-path option is not specified the script attempts to use
-    \$LIBAOM_TEST_DATA_PATH and then the current directory.
-EOF
-}
-
-# Returns non-zero (failure) when required environment variables are empty
-# strings.
-aom_test_check_environment() {
-  if [ -z "${LIBAOM_BIN_PATH}" ] || \
-     [ -z "${LIBAOM_CONFIG_PATH}" ] || \
-     [ -z "${LIBAOM_TEST_DATA_PATH}" ]; then
-    return 1
-  fi
-}
-
-# Echo aomenc command line parameters allowing use of a raw yuv file as
-# input to aomenc.
-yuv_raw_input() {
-  echo ""${YUV_RAW_INPUT}"
-       --width="${YUV_RAW_INPUT_WIDTH}"
-       --height="${YUV_RAW_INPUT_HEIGHT}""
-}
-
-# Do a small encode for testing decoders.
-encode_yuv_raw_input_av1() {
-  if [ "$(av1_encode_available)" = "yes" ]; then
-    local output="$1"
-    local encoder="$(aom_tool_path aomenc)"
-    shift
-    eval "${encoder}" $(yuv_raw_input) \
-      $(aomenc_encode_test_fast_params) \
-      --output="${output}" \
-      $@ \
-      ${devnull}
-
-    if [ ! -e "${output}" ]; then
-      elog "Output file does not exist."
-      return 1
-    fi
-  fi
-}
-
-# Parse the command line.
-while [ -n "$1" ]; do
-  case "$1" in
-    --bin-path)
-      LIBAOM_BIN_PATH="$2"
-      shift
-      ;;
-    --config-path)
-      LIBAOM_CONFIG_PATH="$2"
-      shift
-      ;;
-    --filter)
-      AOM_TEST_FILTER="$2"
-      shift
-      ;;
-    --run-disabled-tests)
-      AOM_TEST_RUN_DISABLED_TESTS=yes
-      ;;
-    --help)
-      aom_test_usage
-      exit
-      ;;
-    --test-data-path)
-      LIBAOM_TEST_DATA_PATH="$2"
-      shift
-      ;;
-    --prefix)
-      AOM_TEST_PREFIX="$2"
-      shift
-      ;;
-    --verbose)
-      AOM_TEST_VERBOSE_OUTPUT=yes
-      ;;
-    --show-program-output)
-      devnull=
-      ;;
-    --list-tests)
-      AOM_TEST_LIST_TESTS=yes
-      ;;
-    *)
-      aom_test_usage
-      exit 1
-      ;;
-  esac
-  shift
-done
-
-# Handle running the tests from a build directory without arguments when running
-# the tests on *nix/macosx.
-LIBAOM_BIN_PATH="${LIBAOM_BIN_PATH:-.}"
-LIBAOM_CONFIG_PATH="${LIBAOM_CONFIG_PATH:-.}"
-LIBAOM_TEST_DATA_PATH="${LIBAOM_TEST_DATA_PATH:-.}"
-
-# Create a temporary directory for output files, and a trap to clean it up.
-if [ -n "${TMPDIR}" ]; then
-  AOM_TEST_TEMP_ROOT="${TMPDIR}"
-elif [ -n "${TEMPDIR}" ]; then
-  AOM_TEST_TEMP_ROOT="${TEMPDIR}"
-else
-  AOM_TEST_TEMP_ROOT=/tmp
-fi
-
-AOM_TEST_OUTPUT_DIR="${AOM_TEST_OUTPUT_DIR:-${AOM_TEST_TEMP_ROOT}/aom_test_$$}"
-
-if ! mkdir -p "${AOM_TEST_OUTPUT_DIR}" || \
-   [ ! -d "${AOM_TEST_OUTPUT_DIR}" ]; then
-  echo "${0##*/}: Cannot create output directory, giving up."
-  echo "${0##*/}:   AOM_TEST_OUTPUT_DIR=${AOM_TEST_OUTPUT_DIR}"
-  exit 1
-fi
-
-AOM_TEST_PRESERVE_OUTPUT=${AOM_TEST_PRESERVE_OUTPUT:-no}
-
-if [ "$(is_windows_target)" = "yes" ]; then
-  AOM_TEST_EXE_SUFFIX=".exe"
-fi
-
-# Variables shared by tests.
-AV1_ENCODE_CPU_USED=${AV1_ENCODE_CPU_USED:-1}
-AV1_ENCODE_TEST_FRAME_LIMIT=${AV1_ENCODE_TEST_FRAME_LIMIT:-5}
-AV1_IVF_FILE="${AV1_IVF_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.ivf}"
-AV1_OBU_ANNEXB_FILE="${AV1_OBU_ANNEXB_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.annexb.obu}"
-AV1_OBU_SEC5_FILE="${AV1_OBU_SEC5_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.section5.obu}"
-AV1_WEBM_FILE="${AV1_WEBM_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.webm}"
-
-YUV_RAW_INPUT="${LIBAOM_TEST_DATA_PATH}/hantro_collage_w352h288.yuv"
-YUV_RAW_INPUT_WIDTH=352
-YUV_RAW_INPUT_HEIGHT=288
-
-Y4M_NOSQ_PAR_INPUT="${LIBAOM_TEST_DATA_PATH}/park_joy_90p_8_420_a10-1.y4m"
-Y4M_720P_INPUT="${LIBAOM_TEST_DATA_PATH}/niklas_1280_720_30.y4m"
-
-# Setup a trap function to clean up after tests complete.
-trap cleanup EXIT
-
-vlog "$(basename "${0%.*}") test configuration:
-  LIBAOM_BIN_PATH=${LIBAOM_BIN_PATH}
-  LIBAOM_CONFIG_PATH=${LIBAOM_CONFIG_PATH}
-  LIBAOM_TEST_DATA_PATH=${LIBAOM_TEST_DATA_PATH}
-  AOM_TEST_EXE_SUFFIX=${AOM_TEST_EXE_SUFFIX}
-  AOM_TEST_FILTER=${AOM_TEST_FILTER}
-  AOM_TEST_LIST_TESTS=${AOM_TEST_LIST_TESTS}
-  AOM_TEST_OUTPUT_DIR=${AOM_TEST_OUTPUT_DIR}
-  AOM_TEST_PREFIX=${AOM_TEST_PREFIX}
-  AOM_TEST_PRESERVE_OUTPUT=${AOM_TEST_PRESERVE_OUTPUT}
-  AOM_TEST_RUN_DISABLED_TESTS=${AOM_TEST_RUN_DISABLED_TESTS}
-  AOM_TEST_SHOW_PROGRAM_OUTPUT=${AOM_TEST_SHOW_PROGRAM_OUTPUT}
-  AOM_TEST_TEMP_ROOT=${AOM_TEST_TEMP_ROOT}
-  AOM_TEST_VERBOSE_OUTPUT=${AOM_TEST_VERBOSE_OUTPUT}
-  AV1_ENCODE_CPU_USED=${AV1_ENCODE_CPU_USED}
-  AV1_ENCODE_TEST_FRAME_LIMIT=${AV1_ENCODE_TEST_FRAME_LIMIT}
-  AV1_IVF_FILE=${AV1_IVF_FILE}
-  AV1_OBU_ANNEXB_FILE=${AV1_OBU_ANNEXB_FILE}
-  AV1_OBU_SEC5_FILE=${AV1_OBU_SEC5_FILE}
-  AV1_WEBM_FILE=${AV1_WEBM_FILE}
-  YUV_RAW_INPUT=${YUV_RAW_INPUT}
-  YUV_RAW_INPUT_WIDTH=${YUV_RAW_INPUT_WIDTH}
-  YUV_RAW_INPUT_HEIGHT=${YUV_RAW_INPUT_HEIGHT}
-  Y4M_NOSQ_PAR_INPUT=${Y4M_NOSQ_PAR_INPUT}"
-
-fi  # End $AOM_TEST_TOOLS_COMMON_SH pseudo include guard.