Add m-esr52 at 52.6.0

1 files changed, 164 insertions, 0 deletions

diff --git a/testing/docker/tester/dot-pulse/default.pa b/testing/docker/tester/dot-pulse/default.pa
new file mode 100644
index 000000000..39bb44aa7
--- /dev/null
+++ b/testing/docker/tester/dot-pulse/default.pa
@@ -0,0 +1,164 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.nofail
+
+### Load something into the sample cache
+#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
+#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
+#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Use the static hardware detection module (for systems that lack udev/hal support)
+load-module module-detect
+.endif
+
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect
+.fail
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+# This module causes a pulseaudio startup failure on "gecko-tester"
+#.ifexists module-bluetooth-discover.so
+#load-module module-bluetooth-discover
+#.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+#load-module module-zeroconf-publish
+
+### Load the RTP receiver module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+# This module causes a pulseaudio startup failure on "gecko-tester"
+#.ifexists module-console-kit.so
+#load-module module-console-kit
+#.endif
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music streams when a phone stream is active
+#load-module module-cork-music-on-phone
+
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+### Load DBus protocol
+#.ifexists module-dbus-protocol.so
+#load-module module-dbus-protocol
+#.endif
+
+# X11 modules should not be started from default.pa so that one daemon
+# can be shared by multiple sessions.
+
+### Load X11 bell module
+#load-module module-x11-bell sample=bell-windowing-system
+
+### Register ourselves in the X11 session manager
+#load-module module-x11-xsmp
+
+### Publish connection data in the X11 root window
+#.ifexists module-x11-publish.so
+#.nofail
+#load-module module-x11-publish
+#.fail
+#.endif
+
+load-module module-switch-on-port-available
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input