/*
 * Copyright 2012, Mozilla Foundation and contributors
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

"use strict";

// THIS FILE IS GENERATED FROM SOURCE IN THE GCLI PROJECT
// PLEASE TALK TO SOMEONE IN DEVELOPER TOOLS BEFORE EDITING IT

const exports = {};

function test() {
  helpers.runTestModule(exports, "browser_gcli_date.js");
}

// var assert = require('../testharness/assert');
// var helpers = require('./helpers');

var Status = require("gcli/types/types").Status;

exports.testParse = function (options) {
  var date = options.requisition.system.types.createType("date");
  return date.parseString("now").then(function (conversion) {
    // Date comparison - these 2 dates may not be the same, but how close is
    // close enough? If this test takes more than 30secs to run the it will
    // probably time out, so we'll assume that these 2 values must be within
    // 1 min of each other
    var gap = new Date().getTime() - conversion.value.getTime();
    assert.ok(gap < 60000, "now is less than a minute away");

    assert.is(conversion.getStatus(), Status.VALID, "now parse");
  });
};

exports.testMaxMin = function (options) {
  var max = new Date();
  var min = new Date();
  var types = options.requisition.system.types;
  var date = types.createType({ name: "date", max: max, min: min });
  assert.is(date.getMax(), max, "max setup");

  var incremented = date.nudge(min, 1);
  assert.is(incremented, max, "incremented");
};

exports.testIncrement = function (options) {
  var date = options.requisition.system.types.createType("date");
  return date.parseString("now").then(function (conversion) {
    var plusOne = date.nudge(conversion.value, 1);
    var minusOne = date.nudge(plusOne, -1);

    // See comments in testParse
    var gap = new Date().getTime() - minusOne.getTime();
    assert.ok(gap < 60000, "now is less than a minute away");
  });
};

exports.testInput = function (options) {
  return helpers.audit(options, [
    {
      setup:    "tsdate 2001-01-01 1980-01-03",
      check: {
        input:  "tsdate 2001-01-01 1980-01-03",
        hints:                              "",
        markup: "VVVVVVVVVVVVVVVVVVVVVVVVVVVV",
        status: "VALID",
        message: "",
        args: {
          command: { name: "tsdate" },
          d1: {
            value: function (d1) {
              assert.is(d1.getFullYear(), 2001, "d1 year");
              assert.is(d1.getMonth(), 0, "d1 month");
              assert.is(d1.getDate(), 1, "d1 date");
              assert.is(d1.getHours(), 0, "d1 hours");
              assert.is(d1.getMinutes(), 0, "d1 minutes");
              assert.is(d1.getSeconds(), 0, "d1 seconds");
              assert.is(d1.getMilliseconds(), 0, "d1 millis");
            },
            arg: " 2001-01-01",
            status: "VALID",
            message: ""
          },
          d2: {
            value: function (d2) {
              assert.is(d2.getFullYear(), 1980, "d2 year");
              assert.is(d2.getMonth(), 0, "d2 month");
              assert.is(d2.getDate(), 3, "d2 date");
              assert.is(d2.getHours(), 0, "d2 hours");
              assert.is(d2.getMinutes(), 0, "d2 minutes");
              assert.is(d2.getSeconds(), 0, "d2 seconds");
              assert.is(d2.getMilliseconds(), 0, "d2 millis");
            },
            arg: " 1980-01-03",
            status: "VALID",
            message: ""
          },
        }
      },
      exec: {
        output: [ /^Exec: tsdate/, /2001/, /1980/ ],
        type: "testCommandOutput",
        error: false
      }
    },
    {
      setup:    "tsdate 2001/01/01 1980/01/03",
      check: {
        input:  "tsdate 2001/01/01 1980/01/03",
        hints:                              "",
        markup: "VVVVVVVVVVVVVVVVVVVVVVVVVVVV",
        status: "VALID",
        message: "",
        args: {
          command: { name: "tsdate" },
          d1: {
            value: function (d1) {
              assert.is(d1.getFullYear(), 2001, "d1 year");
              assert.is(d1.getMonth(), 0, "d1 month");
              assert.is(d1.getDate(), 1, "d1 date");
              assert.is(d1.getHours(), 0, "d1 hours");
              assert.is(d1.getMinutes(), 0, "d1 minutes");
              assert.is(d1.getSeconds(), 0, "d1 seconds");
              assert.is(d1.getMilliseconds(), 0, "d1 millis");
            },
            arg: " 2001/01/01",
            status: "VALID",
            message: ""
          },
          d2: {
            value: function (d2) {
              assert.is(d2.getFullYear(), 1980, "d2 year");
              assert.is(d2.getMonth(), 0, "d2 month");
              assert.is(d2.getDate(), 3, "d2 date");
              assert.is(d2.getHours(), 0, "d2 hours");
              assert.is(d2.getMinutes(), 0, "d2 minutes");
              assert.is(d2.getSeconds(), 0, "d2 seconds");
              assert.is(d2.getMilliseconds(), 0, "d2 millis");
            },
            arg: " 1980/01/03",
            status: "VALID",
            message: ""
          },
        }
      },
      exec: {
        output: [ /^Exec: tsdate/, /2001/, /1980/ ],
        type: "testCommandOutput",
        error: false
      }
    },
    {
      setup:    "tsdate now today",
      check: {
        input:  "tsdate now today",
        hints:                  "",
        markup: "VVVVVVVVVVVVVVVV",
        status: "VALID",
        message: "",
        args: {
          command: { name: "tsdate" },
          d1: {
            value: function (d1) {
              // How long should we allow between d1 and now? Mochitest will
              // time out after 30 secs, so that seems like a decent upper
              // limit, although 30 ms should probably do it. I don't think
              // reducing the limit from 30 secs will find any extra bugs
              assert.ok(d1.getTime() - new Date().getTime() < 30 * 1000,
                        "d1 time");
            },
            arg: " now",
            status: "VALID",
            message: ""
          },
          d2: {
            value: function (d2) {
              // See comment for d1 above
              assert.ok(d2.getTime() - new Date().getTime() < 30 * 1000,
                        "d2 time");
            },
            arg: " today",
            status: "VALID",
            message: ""
          },
        }
      },
      exec: {
        output: [ /^Exec: tsdate/, new Date().getFullYear() ],
        type: "testCommandOutput",
        error: false
      }
    },
    {
      setup:    "tsdate yesterday tomorrow",
      check: {
        input:  "tsdate yesterday tomorrow",
        hints:                           "",
        markup: "VVVVVVVVVVVVVVVVVVVVVVVVV",
        status: "VALID",
        message: "",
        args: {
          command: { name: "tsdate" },
          d1: {
            value: function (d1) {
              var compare = new Date().getTime() - (24 * 60 * 60 * 1000);
              // See comment for d1 in the test for 'tsdate now today'
              assert.ok(d1.getTime() - compare < 30 * 1000,
                        "d1 time");
            },
            arg: " yesterday",
            status: "VALID",
            message: ""
          },
          d2: {
            value: function (d2) {
              var compare = new Date().getTime() + (24 * 60 * 60 * 1000);
              // See comment for d1 in the test for 'tsdate now today'
              assert.ok(d2.getTime() - compare < 30 * 1000,
                        "d2 time");
            },
            arg: " tomorrow",
            status: "VALID",
            message: ""
          },
        }
      },
      exec: {
        output: [ /^Exec: tsdate/, new Date().getFullYear() ],
        type: "testCommandOutput",
        error: false
      }
    }
  ]);
};

exports.testIncrDecr = function (options) {
  return helpers.audit(options, [
    {
      // createRequisitionAutomator doesn't fake UP/DOWN well enough
      skipRemainingIf: options.isNode,
      setup:    "tsdate 2001-01-01<UP>",
      check: {
        input:  "tsdate 2001-01-02",
        hints:                    " <d2>",
        markup: "VVVVVVVVVVVVVVVVV",
        status: "ERROR",
        message: "",
        args: {
          command: { name: "tsdate" },
          d1: {
            value: function (d1) {
              assert.is(d1.getFullYear(), 2001, "d1 year");
              assert.is(d1.getMonth(), 0, "d1 month");
              assert.is(d1.getDate(), 2, "d1 date");
              assert.is(d1.getHours(), 0, "d1 hours");
              assert.is(d1.getMinutes(), 0, "d1 minutes");
              assert.is(d1.getSeconds(), 0, "d1 seconds");
              assert.is(d1.getMilliseconds(), 0, "d1 millis");
            },
            arg: " 2001-01-02",
            status: "VALID",
            message: ""
          },
          d2: {
            value: undefined,
            status: "INCOMPLETE"
          },
        }
      }
    },
    {
      // Check wrapping on decrement
      setup:    "tsdate 2001-02-01<DOWN>",
      check: {
        input:  "tsdate 2001-01-31",
        hints:                    " <d2>",
        markup: "VVVVVVVVVVVVVVVVV",
        status: "ERROR",
        message: "",
        args: {
          command: { name: "tsdate" },
          d1: {
            value: function (d1) {
              assert.is(d1.getFullYear(), 2001, "d1 year");
              assert.is(d1.getMonth(), 0, "d1 month");
              assert.is(d1.getDate(), 31, "d1 date");
              assert.is(d1.getHours(), 0, "d1 hours");
              assert.is(d1.getMinutes(), 0, "d1 minutes");
              assert.is(d1.getSeconds(), 0, "d1 seconds");
              assert.is(d1.getMilliseconds(), 0, "d1 millis");
            },
            arg: " 2001-01-31",
            status: "VALID",
            message: ""
          },
          d2: {
            value: undefined,
            status: "INCOMPLETE"
          },
        }
      }
    },
    {
      // Check 'max' value capping on increment
      setup:    'tsdate 2001-02-01 "27 feb 2000"<UP>',
      check: {
        input:  'tsdate 2001-02-01 "2000-02-28"',
        hints:                                "",
        markup: "VVVVVVVVVVVVVVVVVVVVVVVVVVVVVV",
        status: "VALID",
        message: "",
        args: {
          command: { name: "tsdate" },
          d1: {
            value: function (d1) {
              assert.is(d1.getFullYear(), 2001, "d1 year");
              assert.is(d1.getMonth(), 1, "d1 month");
              assert.is(d1.getDate(), 1, "d1 date");
              assert.is(d1.getHours(), 0, "d1 hours");
              assert.is(d1.getMinutes(), 0, "d1 minutes");
              assert.is(d1.getSeconds(), 0, "d1 seconds");
              assert.is(d1.getMilliseconds(), 0, "d1 millis");
            },
            arg: " 2001-02-01",
            status: "VALID",
            message: ""
          },
          d2: {
            value: function (d2) {
              assert.is(d2.getFullYear(), 2000, "d2 year");
              assert.is(d2.getMonth(), 1, "d2 month");
              assert.is(d2.getDate(), 28, "d2 date");
              assert.is(d2.getHours(), 0, "d2 hours");
              assert.is(d2.getMinutes(), 0, "d2 minutes");
              assert.is(d2.getSeconds(), 0, "d2 seconds");
              assert.is(d2.getMilliseconds(), 0, "d2 millis");
            },
            arg: ' "2000-02-28"',
            status: "VALID",
            message: ""
          },
        }
      }
    }
  ]);
};