From 5f8de423f190bbb79a62f804151bc24824fa32d8 Mon Sep 17 00:00:00 2001 From: "Matt A. Tobin" Date: Fri, 2 Feb 2018 04:16:08 -0500 Subject: Add m-esr52 at 52.6.0 --- security/nss/lib/pkcs7/p7local.c | 1310 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 1310 insertions(+) create mode 100644 security/nss/lib/pkcs7/p7local.c (limited to 'security/nss/lib/pkcs7/p7local.c') diff --git a/security/nss/lib/pkcs7/p7local.c b/security/nss/lib/pkcs7/p7local.c new file mode 100644 index 000000000..182e385b6 --- /dev/null +++ b/security/nss/lib/pkcs7/p7local.c @@ -0,0 +1,1310 @@ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +/* + * Support routines for PKCS7 implementation, none of which are exported. + * This file should only contain things that are needed by both the + * encoding/creation side *and* the decoding/decryption side. Anything + * else should be static routines in the appropriate file. + */ + +#include "p7local.h" + +#include "cryptohi.h" +#include "secasn1.h" +#include "secoid.h" +#include "secitem.h" +#include "pk11func.h" +#include "secpkcs5.h" +#include "secerr.h" + +/* + * ------------------------------------------------------------------- + * Cipher stuff. + */ + +typedef SECStatus (*sec_pkcs7_cipher_function)(void *, + unsigned char *, + unsigned *, + unsigned int, + const unsigned char *, + unsigned int); +typedef SECStatus (*sec_pkcs7_cipher_destroy)(void *, PRBool); + +#define BLOCK_SIZE 4096 + +struct sec_pkcs7_cipher_object { + void *cx; + sec_pkcs7_cipher_function doit; + sec_pkcs7_cipher_destroy destroy; + PRBool encrypt; + int block_size; + int pad_size; + int pending_count; + unsigned char pending_buf[BLOCK_SIZE]; +}; + +SEC_ASN1_MKSUB(CERT_IssuerAndSNTemplate) +SEC_ASN1_MKSUB(CERT_SetOfSignedCrlTemplate) +SEC_ASN1_MKSUB(SECOID_AlgorithmIDTemplate) +SEC_ASN1_MKSUB(SEC_OctetStringTemplate) +SEC_ASN1_MKSUB(SEC_SetOfAnyTemplate) + +/* + * Create a cipher object to do decryption, based on the given bulk + * encryption key and algorithm identifier (which may include an iv). + * + * XXX This interface, or one similar, would be really nice available + * in general... I tried to keep the pkcs7-specific stuff (mostly + * having to do with padding) out of here. + * + * XXX Once both are working, it might be nice to combine this and the + * function below (for starting up encryption) into one routine, and just + * have two simple cover functions which call it. + */ +sec_PKCS7CipherObject * +sec_PKCS7CreateDecryptObject(PK11SymKey *key, SECAlgorithmID *algid) +{ + sec_PKCS7CipherObject *result; + SECOidTag algtag; + void *ciphercx; + CK_MECHANISM_TYPE cryptoMechType; + PK11SlotInfo *slot; + SECItem *param = NULL; + + result = (struct sec_pkcs7_cipher_object *) + PORT_ZAlloc(sizeof(struct sec_pkcs7_cipher_object)); + if (result == NULL) + return NULL; + + ciphercx = NULL; + algtag = SECOID_GetAlgorithmTag(algid); + + if (SEC_PKCS5IsAlgorithmPBEAlg(algid)) { + SECItem *pwitem; + + pwitem = (SECItem *)PK11_GetSymKeyUserData(key); + if (!pwitem) { + PORT_Free(result); + return NULL; + } + + cryptoMechType = PK11_GetPBECryptoMechanism(algid, ¶m, pwitem); + if (cryptoMechType == CKM_INVALID_MECHANISM) { + PORT_Free(result); + SECITEM_FreeItem(param, PR_TRUE); + return NULL; + } + } else { + cryptoMechType = PK11_AlgtagToMechanism(algtag); + param = PK11_ParamFromAlgid(algid); + if (param == NULL) { + PORT_Free(result); + return NULL; + } + } + + result->pad_size = PK11_GetBlockSize(cryptoMechType, param); + slot = PK11_GetSlotFromKey(key); + result->block_size = PK11_IsHW(slot) ? BLOCK_SIZE : result->pad_size; + PK11_FreeSlot(slot); + ciphercx = PK11_CreateContextBySymKey(cryptoMechType, CKA_DECRYPT, + key, param); + SECITEM_FreeItem(param, PR_TRUE); + if (ciphercx == NULL) { + PORT_Free(result); + return NULL; + } + + result->cx = ciphercx; + result->doit = (sec_pkcs7_cipher_function)PK11_CipherOp; + result->destroy = (sec_pkcs7_cipher_destroy)PK11_DestroyContext; + result->encrypt = PR_FALSE; + result->pending_count = 0; + + return result; +} + +/* + * Create a cipher object to do encryption, based on the given bulk + * encryption key and algorithm tag. Fill in the algorithm identifier + * (which may include an iv) appropriately. + * + * XXX This interface, or one similar, would be really nice available + * in general... I tried to keep the pkcs7-specific stuff (mostly + * having to do with padding) out of here. + * + * XXX Once both are working, it might be nice to combine this and the + * function above (for starting up decryption) into one routine, and just + * have two simple cover functions which call it. + */ +sec_PKCS7CipherObject * +sec_PKCS7CreateEncryptObject(PLArenaPool *poolp, PK11SymKey *key, + SECOidTag algtag, SECAlgorithmID *algid) +{ + sec_PKCS7CipherObject *result; + void *ciphercx; + SECStatus rv; + CK_MECHANISM_TYPE cryptoMechType; + PK11SlotInfo *slot; + SECItem *param = NULL; + PRBool needToEncodeAlgid = PR_FALSE; + + result = (struct sec_pkcs7_cipher_object *) + PORT_ZAlloc(sizeof(struct sec_pkcs7_cipher_object)); + if (result == NULL) + return NULL; + + ciphercx = NULL; + if (SEC_PKCS5IsAlgorithmPBEAlg(algid)) { + SECItem *pwitem; + + pwitem = (SECItem *)PK11_GetSymKeyUserData(key); + if (!pwitem) { + PORT_Free(result); + return NULL; + } + + cryptoMechType = PK11_GetPBECryptoMechanism(algid, ¶m, pwitem); + if (cryptoMechType == CKM_INVALID_MECHANISM) { + PORT_Free(result); + SECITEM_FreeItem(param, PR_TRUE); + return NULL; + } + } else { + cryptoMechType = PK11_AlgtagToMechanism(algtag); + param = PK11_GenerateNewParam(cryptoMechType, key); + if (param == NULL) { + PORT_Free(result); + return NULL; + } + needToEncodeAlgid = PR_TRUE; + } + + result->pad_size = PK11_GetBlockSize(cryptoMechType, param); + slot = PK11_GetSlotFromKey(key); + result->block_size = PK11_IsHW(slot) ? BLOCK_SIZE : result->pad_size; + PK11_FreeSlot(slot); + ciphercx = PK11_CreateContextBySymKey(cryptoMechType, CKA_ENCRYPT, + key, param); + if (ciphercx == NULL) { + PORT_Free(result); + SECITEM_FreeItem(param, PR_TRUE); + return NULL; + } + + /* + * These are placed after the CreateContextBySymKey() because some + * mechanisms have to generate their IVs from their card (i.e. FORTEZZA). + * Don't move it from here. + */ + if (needToEncodeAlgid) { + rv = PK11_ParamToAlgid(algtag, param, poolp, algid); + if (rv != SECSuccess) { + PORT_Free(result); + SECITEM_FreeItem(param, PR_TRUE); + PK11_DestroyContext(ciphercx, PR_TRUE); + return NULL; + } + } + SECITEM_FreeItem(param, PR_TRUE); + + result->cx = ciphercx; + result->doit = (sec_pkcs7_cipher_function)PK11_CipherOp; + result->destroy = (sec_pkcs7_cipher_destroy)PK11_DestroyContext; + result->encrypt = PR_TRUE; + result->pending_count = 0; + + return result; +} + +/* + * Destroy the cipher object. + */ +static void +sec_pkcs7_destroy_cipher(sec_PKCS7CipherObject *obj) +{ + (*obj->destroy)(obj->cx, PR_TRUE); + PORT_Free(obj); +} + +void +sec_PKCS7DestroyDecryptObject(sec_PKCS7CipherObject *obj) +{ + PORT_Assert(obj != NULL); + if (obj == NULL) + return; + PORT_Assert(!obj->encrypt); + sec_pkcs7_destroy_cipher(obj); +} + +void +sec_PKCS7DestroyEncryptObject(sec_PKCS7CipherObject *obj) +{ + PORT_Assert(obj != NULL); + if (obj == NULL) + return; + PORT_Assert(obj->encrypt); + sec_pkcs7_destroy_cipher(obj); +} + +/* + * XXX I think all of the following lengths should be longs instead + * of ints, but our current crypto interface uses ints, so I did too. + */ + +/* + * What will be the output length of the next call to decrypt? + * Result can be used to perform memory allocations. Note that the amount + * is exactly accurate only when not doing a block cipher or when final + * is false, otherwise it is an upper bound on the amount because until + * we see the data we do not know how many padding bytes there are + * (always between 1 and bsize). + * + * Note that this can return zero, which does not mean that the decrypt + * operation can be skipped! (It simply means that there are not enough + * bytes to make up an entire block; the bytes will be reserved until + * there are enough to encrypt/decrypt at least one block.) However, + * if zero is returned it *does* mean that no output buffer need be + * passed in to the subsequent decrypt operation, as no output bytes + * will be stored. + */ +unsigned int +sec_PKCS7DecryptLength(sec_PKCS7CipherObject *obj, unsigned int input_len, + PRBool final) +{ + int blocks, block_size; + + PORT_Assert(!obj->encrypt); + + block_size = obj->block_size; + + /* + * If this is not a block cipher, then we always have the same + * number of output bytes as we had input bytes. + */ + if (block_size == 0) + return input_len; + + /* + * On the final call, we will always use up all of the pending + * bytes plus all of the input bytes, *but*, there will be padding + * at the end and we cannot predict how many bytes of padding we + * will end up removing. The amount given here is actually known + * to be at least 1 byte too long (because we know we will have + * at least 1 byte of padding), but seemed clearer/better to me. + */ + if (final) + return obj->pending_count + input_len; + + /* + * Okay, this amount is exactly what we will output on the + * next cipher operation. We will always hang onto the last + * 1 - block_size bytes for non-final operations. That is, + * we will do as many complete blocks as we can *except* the + * last block (complete or partial). (This is because until + * we know we are at the end, we cannot know when to interpret + * and removing the padding byte(s), which are guaranteed to + * be there.) + */ + blocks = (obj->pending_count + input_len - 1) / block_size; + return blocks * block_size; +} + +/* + * What will be the output length of the next call to encrypt? + * Result can be used to perform memory allocations. + * + * Note that this can return zero, which does not mean that the encrypt + * operation can be skipped! (It simply means that there are not enough + * bytes to make up an entire block; the bytes will be reserved until + * there are enough to encrypt/decrypt at least one block.) However, + * if zero is returned it *does* mean that no output buffer need be + * passed in to the subsequent encrypt operation, as no output bytes + * will be stored. + */ +unsigned int +sec_PKCS7EncryptLength(sec_PKCS7CipherObject *obj, unsigned int input_len, + PRBool final) +{ + int blocks, block_size; + int pad_size; + + PORT_Assert(obj->encrypt); + + block_size = obj->block_size; + pad_size = obj->pad_size; + + /* + * If this is not a block cipher, then we always have the same + * number of output bytes as we had input bytes. + */ + if (block_size == 0) + return input_len; + + /* + * On the final call, we only send out what we need for + * remaining bytes plus the padding. (There is always padding, + * so even if we have an exact number of blocks as input, we + * will add another full block that is just padding.) + */ + if (final) { + if (pad_size == 0) { + return obj->pending_count + input_len; + } else { + blocks = (obj->pending_count + input_len) / pad_size; + blocks++; + return blocks * pad_size; + } + } + + /* + * Now, count the number of complete blocks of data we have. + */ + blocks = (obj->pending_count + input_len) / block_size; + + return blocks * block_size; +} + +/* + * Decrypt a given length of input buffer (starting at "input" and + * containing "input_len" bytes), placing the decrypted bytes in + * "output" and storing the output length in "*output_len_p". + * "obj" is the return value from sec_PKCS7CreateDecryptObject. + * When "final" is true, this is the last of the data to be decrypted. + * + * This is much more complicated than it sounds when the cipher is + * a block-type, meaning that the decryption function will only + * operate on whole blocks. But our caller is operating stream-wise, + * and can pass in any number of bytes. So we need to keep track + * of block boundaries. We save excess bytes between calls in "obj". + * We also need to determine which bytes are padding, and remove + * them from the output. We can only do this step when we know we + * have the final block of data. PKCS #7 specifies that the padding + * used for a block cipher is a string of bytes, each of whose value is + * the same as the length of the padding, and that all data is padded. + * (Even data that starts out with an exact multiple of blocks gets + * added to it another block, all of which is padding.) + */ +SECStatus +sec_PKCS7Decrypt(sec_PKCS7CipherObject *obj, unsigned char *output, + unsigned int *output_len_p, unsigned int max_output_len, + const unsigned char *input, unsigned int input_len, + PRBool final) +{ + unsigned int blocks, bsize, pcount, padsize; + unsigned int max_needed, ifraglen, ofraglen, output_len; + unsigned char *pbuf; + SECStatus rv; + + PORT_Assert(!obj->encrypt); + + /* + * Check that we have enough room for the output. Our caller should + * already handle this; failure is really an internal error (i.e. bug). + */ + max_needed = sec_PKCS7DecryptLength(obj, input_len, final); + PORT_Assert(max_output_len >= max_needed); + if (max_output_len < max_needed) { + /* PORT_SetError (XXX); */ + return SECFailure; + } + + /* + * hardware encryption does not like small decryption sizes here, so we + * allow both blocking and padding. + */ + bsize = obj->block_size; + padsize = obj->pad_size; + + /* + * When no blocking or padding work to do, we can simply call the + * cipher function and we are done. + */ + if (bsize == 0) { + return (*obj->doit)(obj->cx, output, output_len_p, max_output_len, + input, input_len); + } + + pcount = obj->pending_count; + pbuf = obj->pending_buf; + + output_len = 0; + + if (pcount) { + /* + * Try to fill in an entire block, starting with the bytes + * we already have saved away. + */ + while (input_len && pcount < bsize) { + pbuf[pcount++] = *input++; + input_len--; + } + /* + * If we have at most a whole block and this is not our last call, + * then we are done for now. (We do not try to decrypt a lone + * single block because we cannot interpret the padding bytes + * until we know we are handling the very last block of all input.) + */ + if (input_len == 0 && !final) { + obj->pending_count = pcount; + if (output_len_p) + *output_len_p = 0; + return SECSuccess; + } + /* + * Given the logic above, we expect to have a full block by now. + * If we do not, there is something wrong, either with our own + * logic or with (length of) the data given to us. + */ + PORT_Assert((padsize == 0) || (pcount % padsize) == 0); + if ((padsize != 0) && (pcount % padsize) != 0) { + PORT_Assert(final); + PORT_SetError(SEC_ERROR_BAD_DATA); + return SECFailure; + } + /* + * Decrypt the block. + */ + rv = (*obj->doit)(obj->cx, output, &ofraglen, max_output_len, + pbuf, pcount); + if (rv != SECSuccess) + return rv; + + /* + * For now anyway, all of our ciphers have the same number of + * bytes of output as they do input. If this ever becomes untrue, + * then sec_PKCS7DecryptLength needs to be made smarter! + */ + PORT_Assert(ofraglen == pcount); + + /* + * Account for the bytes now in output. + */ + max_output_len -= ofraglen; + output_len += ofraglen; + output += ofraglen; + } + + /* + * If this is our last call, we expect to have an exact number of + * blocks left to be decrypted; we will decrypt them all. + * + * If not our last call, we always save between 1 and bsize bytes + * until next time. (We must do this because we cannot be sure + * that none of the decrypted bytes are padding bytes until we + * have at least another whole block of data. You cannot tell by + * looking -- the data could be anything -- you can only tell by + * context, knowing you are looking at the last block.) We could + * decrypt a whole block now but it is easier if we just treat it + * the same way we treat partial block bytes. + */ + if (final) { + if (padsize) { + blocks = input_len / padsize; + ifraglen = blocks * padsize; + } else + ifraglen = input_len; + PORT_Assert(ifraglen == input_len); + + if (ifraglen != input_len) { + PORT_SetError(SEC_ERROR_BAD_DATA); + return SECFailure; + } + } else { + blocks = (input_len - 1) / bsize; + ifraglen = blocks * bsize; + PORT_Assert(ifraglen < input_len); + + pcount = input_len - ifraglen; + PORT_Memcpy(pbuf, input + ifraglen, pcount); + obj->pending_count = pcount; + } + + if (ifraglen) { + rv = (*obj->doit)(obj->cx, output, &ofraglen, max_output_len, + input, ifraglen); + if (rv != SECSuccess) + return rv; + + /* + * For now anyway, all of our ciphers have the same number of + * bytes of output as they do input. If this ever becomes untrue, + * then sec_PKCS7DecryptLength needs to be made smarter! + */ + PORT_Assert(ifraglen == ofraglen); + if (ifraglen != ofraglen) { + PORT_SetError(SEC_ERROR_BAD_DATA); + return SECFailure; + } + + output_len += ofraglen; + } else { + ofraglen = 0; + } + + /* + * If we just did our very last block, "remove" the padding by + * adjusting the output length. + */ + if (final && (padsize != 0)) { + unsigned int padlen = *(output + ofraglen - 1); + if (padlen == 0 || padlen > padsize) { + PORT_SetError(SEC_ERROR_BAD_DATA); + return SECFailure; + } + output_len -= padlen; + } + + PORT_Assert(output_len_p != NULL || output_len == 0); + if (output_len_p != NULL) + *output_len_p = output_len; + + return SECSuccess; +} + +/* + * Encrypt a given length of input buffer (starting at "input" and + * containing "input_len" bytes), placing the encrypted bytes in + * "output" and storing the output length in "*output_len_p". + * "obj" is the return value from sec_PKCS7CreateEncryptObject. + * When "final" is true, this is the last of the data to be encrypted. + * + * This is much more complicated than it sounds when the cipher is + * a block-type, meaning that the encryption function will only + * operate on whole blocks. But our caller is operating stream-wise, + * and can pass in any number of bytes. So we need to keep track + * of block boundaries. We save excess bytes between calls in "obj". + * We also need to add padding bytes at the end. PKCS #7 specifies + * that the padding used for a block cipher is a string of bytes, + * each of whose value is the same as the length of the padding, + * and that all data is padded. (Even data that starts out with + * an exact multiple of blocks gets added to it another block, + * all of which is padding.) + * + * XXX I would kind of like to combine this with the function above + * which does decryption, since they have a lot in common. But the + * tricky parts about padding and filling blocks would be much + * harder to read that way, so I left them separate. At least for + * now until it is clear that they are right. + */ +SECStatus +sec_PKCS7Encrypt(sec_PKCS7CipherObject *obj, unsigned char *output, + unsigned int *output_len_p, unsigned int max_output_len, + const unsigned char *input, unsigned int input_len, + PRBool final) +{ + int blocks, bsize, padlen, pcount, padsize; + unsigned int max_needed, ifraglen, ofraglen, output_len; + unsigned char *pbuf; + SECStatus rv; + + PORT_Assert(obj->encrypt); + + /* + * Check that we have enough room for the output. Our caller should + * already handle this; failure is really an internal error (i.e. bug). + */ + max_needed = sec_PKCS7EncryptLength(obj, input_len, final); + PORT_Assert(max_output_len >= max_needed); + if (max_output_len < max_needed) { + /* PORT_SetError (XXX); */ + return SECFailure; + } + + bsize = obj->block_size; + padsize = obj->pad_size; + + /* + * When no blocking and padding work to do, we can simply call the + * cipher function and we are done. + */ + if (bsize == 0) { + return (*obj->doit)(obj->cx, output, output_len_p, max_output_len, + input, input_len); + } + + pcount = obj->pending_count; + pbuf = obj->pending_buf; + + output_len = 0; + + if (pcount) { + /* + * Try to fill in an entire block, starting with the bytes + * we already have saved away. + */ + while (input_len && pcount < bsize) { + pbuf[pcount++] = *input++; + input_len--; + } + /* + * If we do not have a full block and we know we will be + * called again, then we are done for now. + */ + if (pcount < bsize && !final) { + obj->pending_count = pcount; + if (output_len_p != NULL) + *output_len_p = 0; + return SECSuccess; + } + /* + * If we have a whole block available, encrypt it. + */ + if ((padsize == 0) || (pcount % padsize) == 0) { + rv = (*obj->doit)(obj->cx, output, &ofraglen, max_output_len, + pbuf, pcount); + if (rv != SECSuccess) + return rv; + + /* + * For now anyway, all of our ciphers have the same number of + * bytes of output as they do input. If this ever becomes untrue, + * then sec_PKCS7EncryptLength needs to be made smarter! + */ + PORT_Assert(ofraglen == pcount); + + /* + * Account for the bytes now in output. + */ + max_output_len -= ofraglen; + output_len += ofraglen; + output += ofraglen; + + pcount = 0; + } + } + + if (input_len) { + PORT_Assert(pcount == 0); + + blocks = input_len / bsize; + ifraglen = blocks * bsize; + + if (ifraglen) { + rv = (*obj->doit)(obj->cx, output, &ofraglen, max_output_len, + input, ifraglen); + if (rv != SECSuccess) + return rv; + + /* + * For now anyway, all of our ciphers have the same number of + * bytes of output as they do input. If this ever becomes untrue, + * then sec_PKCS7EncryptLength needs to be made smarter! + */ + PORT_Assert(ifraglen == ofraglen); + + max_output_len -= ofraglen; + output_len += ofraglen; + output += ofraglen; + } + + pcount = input_len - ifraglen; + PORT_Assert(pcount < bsize); + if (pcount) + PORT_Memcpy(pbuf, input + ifraglen, pcount); + } + + if (final) { + if (padsize) { + padlen = padsize - (pcount % padsize); + PORT_Memset(pbuf + pcount, padlen, padlen); + } else { + padlen = 0; + } + rv = (*obj->doit)(obj->cx, output, &ofraglen, max_output_len, + pbuf, pcount + padlen); + if (rv != SECSuccess) + return rv; + + /* + * For now anyway, all of our ciphers have the same number of + * bytes of output as they do input. If this ever becomes untrue, + * then sec_PKCS7EncryptLength needs to be made smarter! + */ + PORT_Assert(ofraglen == (pcount + padlen)); + output_len += ofraglen; + } else { + obj->pending_count = pcount; + } + + PORT_Assert(output_len_p != NULL || output_len == 0); + if (output_len_p != NULL) + *output_len_p = output_len; + + return SECSuccess; +} + +/* + * End of cipher stuff. + * ------------------------------------------------------------------- + */ + +/* + * ------------------------------------------------------------------- + * XXX The following Attribute stuff really belongs elsewhere. + * The Attribute type is *not* part of pkcs7 but rather X.501. + * But for now, since PKCS7 is the only customer of attributes, + * we define them here. Once there is a use outside of PKCS7, + * then change the attribute types and functions from internal + * to external naming convention, and move them elsewhere! + */ + +/* + * Look through a set of attributes and find one that matches the + * specified object ID. If "only" is true, then make sure that + * there is not more than one attribute of the same type. Otherwise, + * just return the first one found. (XXX Does anybody really want + * that first-found behavior? It was like that when I found it...) + */ +SEC_PKCS7Attribute * +sec_PKCS7FindAttribute(SEC_PKCS7Attribute **attrs, SECOidTag oidtag, + PRBool only) +{ + SECOidData *oid; + SEC_PKCS7Attribute *attr1, *attr2; + + if (attrs == NULL) + return NULL; + + oid = SECOID_FindOIDByTag(oidtag); + if (oid == NULL) + return NULL; + + while ((attr1 = *attrs++) != NULL) { + if (attr1->type.len == oid->oid.len && PORT_Memcmp(attr1->type.data, oid->oid.data, oid->oid.len) == 0) + break; + } + + if (attr1 == NULL) + return NULL; + + if (!only) + return attr1; + + while ((attr2 = *attrs++) != NULL) { + if (attr2->type.len == oid->oid.len && PORT_Memcmp(attr2->type.data, oid->oid.data, oid->oid.len) == 0) + break; + } + + if (attr2 != NULL) + return NULL; + + return attr1; +} + +/* + * Return the single attribute value, doing some sanity checking first: + * - Multiple values are *not* expected. + * - Empty values are *not* expected. + */ +SECItem * +sec_PKCS7AttributeValue(SEC_PKCS7Attribute *attr) +{ + SECItem *value; + + if (attr == NULL) + return NULL; + + value = attr->values[0]; + + if (value == NULL || value->data == NULL || value->len == 0) + return NULL; + + if (attr->values[1] != NULL) + return NULL; + + return value; +} + +static const SEC_ASN1Template * +sec_attr_choose_attr_value_template(void *src_or_dest, PRBool encoding) +{ + const SEC_ASN1Template *theTemplate; + + SEC_PKCS7Attribute *attribute; + SECOidData *oiddata; + PRBool encoded; + + PORT_Assert(src_or_dest != NULL); + if (src_or_dest == NULL) + return NULL; + + attribute = (SEC_PKCS7Attribute *)src_or_dest; + + if (encoding && attribute->encoded) + return SEC_ASN1_GET(SEC_AnyTemplate); + + oiddata = attribute->typeTag; + if (oiddata == NULL) { + oiddata = SECOID_FindOID(&attribute->type); + attribute->typeTag = oiddata; + } + + if (oiddata == NULL) { + encoded = PR_TRUE; + theTemplate = SEC_ASN1_GET(SEC_AnyTemplate); + } else { + switch (oiddata->offset) { + default: + encoded = PR_TRUE; + theTemplate = SEC_ASN1_GET(SEC_AnyTemplate); + break; + case SEC_OID_PKCS9_EMAIL_ADDRESS: + case SEC_OID_RFC1274_MAIL: + case SEC_OID_PKCS9_UNSTRUCTURED_NAME: + encoded = PR_FALSE; + theTemplate = SEC_ASN1_GET(SEC_IA5StringTemplate); + break; + case SEC_OID_PKCS9_CONTENT_TYPE: + encoded = PR_FALSE; + theTemplate = SEC_ASN1_GET(SEC_ObjectIDTemplate); + break; + case SEC_OID_PKCS9_MESSAGE_DIGEST: + encoded = PR_FALSE; + theTemplate = SEC_ASN1_GET(SEC_OctetStringTemplate); + break; + case SEC_OID_PKCS9_SIGNING_TIME: + encoded = PR_FALSE; + theTemplate = SEC_ASN1_GET(CERT_TimeChoiceTemplate); + break; + /* XXX Want other types here, too */ + } + } + + if (encoding) { + /* + * If we are encoding and we think we have an already-encoded value, + * then the code which initialized this attribute should have set + * the "encoded" property to true (and we would have returned early, + * up above). No devastating error, but that code should be fixed. + * (It could indicate that the resulting encoded bytes are wrong.) + */ + PORT_Assert(!encoded); + } else { + /* + * We are decoding; record whether the resulting value is + * still encoded or not. + */ + attribute->encoded = encoded; + } + return theTemplate; +} + +static const SEC_ASN1TemplateChooserPtr sec_attr_chooser = sec_attr_choose_attr_value_template; + +static const SEC_ASN1Template sec_pkcs7_attribute_template[] = { + { SEC_ASN1_SEQUENCE, + 0, NULL, sizeof(SEC_PKCS7Attribute) }, + { SEC_ASN1_OBJECT_ID, + offsetof(SEC_PKCS7Attribute, type) }, + { SEC_ASN1_DYNAMIC | SEC_ASN1_SET_OF, + offsetof(SEC_PKCS7Attribute, values), + &sec_attr_chooser }, + { 0 } +}; + +static const SEC_ASN1Template sec_pkcs7_set_of_attribute_template[] = { + { SEC_ASN1_SET_OF, 0, sec_pkcs7_attribute_template }, +}; + +/* + * If you are wondering why this routine does not reorder the attributes + * first, and might be tempted to make it do so, see the comment by the + * call to ReorderAttributes in p7encode.c. (Or, see who else calls this + * and think long and hard about the implications of making it always + * do the reordering.) + */ +SECItem * +sec_PKCS7EncodeAttributes(PLArenaPool *poolp, SECItem *dest, void *src) +{ + return SEC_ASN1EncodeItem(poolp, dest, src, + sec_pkcs7_set_of_attribute_template); +} + +/* + * Make sure that the order of the attributes guarantees valid DER + * (which must be in lexigraphically ascending order for a SET OF); + * if reordering is necessary it will be done in place (in attrs). + */ +SECStatus +sec_PKCS7ReorderAttributes(SEC_PKCS7Attribute **attrs) +{ + PLArenaPool *poolp; + int num_attrs, i, pass, besti; + unsigned int j; + SECItem **enc_attrs; + SEC_PKCS7Attribute **new_attrs; + + /* + * I think we should not be called with NULL. But if we are, + * call it a success anyway, because the order *is* okay. + */ + PORT_Assert(attrs != NULL); + if (attrs == NULL) + return SECSuccess; + + /* + * Count how many attributes we are dealing with here. + */ + num_attrs = 0; + while (attrs[num_attrs] != NULL) + num_attrs++; + + /* + * Again, I think we should have some attributes here. + * But if we do not, or if there is only one, then call it + * a success because it also already has a fine order. + */ + PORT_Assert(num_attrs); + if (num_attrs == 0 || num_attrs == 1) + return SECSuccess; + + /* + * Allocate an arena for us to work with, so it is easy to + * clean up all of the memory (fairly small pieces, really). + */ + poolp = PORT_NewArena(1024); /* XXX what is right value? */ + if (poolp == NULL) + return SECFailure; /* no memory; nothing we can do... */ + + /* + * Allocate arrays to hold the individual encodings which we will use + * for comparisons and the reordered attributes as they are sorted. + */ + enc_attrs = (SECItem **)PORT_ArenaZAlloc(poolp, num_attrs * sizeof(SECItem *)); + new_attrs = (SEC_PKCS7Attribute **)PORT_ArenaZAlloc(poolp, + num_attrs * sizeof(SEC_PKCS7Attribute *)); + if (enc_attrs == NULL || new_attrs == NULL) { + PORT_FreeArena(poolp, PR_FALSE); + return SECFailure; + } + + /* + * DER encode each individual attribute. + */ + for (i = 0; i < num_attrs; i++) { + enc_attrs[i] = SEC_ASN1EncodeItem(poolp, NULL, attrs[i], + sec_pkcs7_attribute_template); + if (enc_attrs[i] == NULL) { + PORT_FreeArena(poolp, PR_FALSE); + return SECFailure; + } + } + + /* + * Now compare and sort them; this is not the most efficient sorting + * method, but it is just fine for the problem at hand, because the + * number of attributes is (always) going to be small. + */ + for (pass = 0; pass < num_attrs; pass++) { + /* + * Find the first not-yet-accepted attribute. (Once one is + * sorted into the other array, it is cleared from enc_attrs.) + */ + for (i = 0; i < num_attrs; i++) { + if (enc_attrs[i] != NULL) + break; + } + PORT_Assert(i < num_attrs); + besti = i; + + /* + * Find the lowest (lexigraphically) encoding. One that is + * shorter than all the rest is known to be "less" because each + * attribute is of the same type (a SEQUENCE) and so thus the + * first octet of each is the same, and the second octet is + * the length (or the length of the length with the high bit + * set, followed by the length, which also works out to always + * order the shorter first). Two (or more) that have the + * same length need to be compared byte by byte until a mismatch + * is found. + */ + for (i = besti + 1; i < num_attrs; i++) { + if (enc_attrs[i] == NULL) /* slot already handled */ + continue; + + if (enc_attrs[i]->len != enc_attrs[besti]->len) { + if (enc_attrs[i]->len < enc_attrs[besti]->len) + besti = i; + continue; + } + + for (j = 0; j < enc_attrs[i]->len; j++) { + if (enc_attrs[i]->data[j] < enc_attrs[besti]->data[j]) { + besti = i; + break; + } + } + + /* + * For this not to be true, we would have to have encountered + * two *identical* attributes, which I think we should not see. + * So assert if it happens, but even if it does, let it go + * through; the ordering of the two does not matter. + */ + PORT_Assert(j < enc_attrs[i]->len); + } + + /* + * Now we have found the next-lowest one; copy it over and + * remove it from enc_attrs. + */ + new_attrs[pass] = attrs[besti]; + enc_attrs[besti] = NULL; + } + + /* + * Now new_attrs has the attributes in the order we want; + * copy them back into the attrs array we started with. + */ + for (i = 0; i < num_attrs; i++) + attrs[i] = new_attrs[i]; + + PORT_FreeArena(poolp, PR_FALSE); + return SECSuccess; +} + +/* + * End of attribute stuff. + * ------------------------------------------------------------------- + */ + +/* + * Templates and stuff. Keep these at the end of the file. + */ + +/* forward declaration */ +static const SEC_ASN1Template * +sec_pkcs7_choose_content_template(void *src_or_dest, PRBool encoding); + +static const SEC_ASN1TemplateChooserPtr sec_pkcs7_chooser = sec_pkcs7_choose_content_template; + +const SEC_ASN1Template sec_PKCS7ContentInfoTemplate[] = { + { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM, + 0, NULL, sizeof(SEC_PKCS7ContentInfo) }, + { SEC_ASN1_OBJECT_ID, + offsetof(SEC_PKCS7ContentInfo, contentType) }, + { SEC_ASN1_OPTIONAL | SEC_ASN1_DYNAMIC | SEC_ASN1_MAY_STREAM | SEC_ASN1_EXPLICIT | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 0, + offsetof(SEC_PKCS7ContentInfo, content), + &sec_pkcs7_chooser }, + { 0 } +}; + +/* XXX These names should change from external to internal convention. */ + +static const SEC_ASN1Template SEC_PKCS7SignerInfoTemplate[] = { + { SEC_ASN1_SEQUENCE, + 0, NULL, sizeof(SEC_PKCS7SignerInfo) }, + { SEC_ASN1_INTEGER, + offsetof(SEC_PKCS7SignerInfo, version) }, + { SEC_ASN1_POINTER | SEC_ASN1_XTRN, + offsetof(SEC_PKCS7SignerInfo, issuerAndSN), + SEC_ASN1_SUB(CERT_IssuerAndSNTemplate) }, + { SEC_ASN1_INLINE | SEC_ASN1_XTRN, + offsetof(SEC_PKCS7SignerInfo, digestAlg), + SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) }, + { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 0, + offsetof(SEC_PKCS7SignerInfo, authAttr), + sec_pkcs7_set_of_attribute_template }, + { SEC_ASN1_INLINE | SEC_ASN1_XTRN, + offsetof(SEC_PKCS7SignerInfo, digestEncAlg), + SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) }, + { SEC_ASN1_OCTET_STRING, + offsetof(SEC_PKCS7SignerInfo, encDigest) }, + { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 1, + offsetof(SEC_PKCS7SignerInfo, unAuthAttr), + sec_pkcs7_set_of_attribute_template }, + { 0 } +}; + +static const SEC_ASN1Template SEC_PKCS7SignedDataTemplate[] = { + { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM, + 0, NULL, sizeof(SEC_PKCS7SignedData) }, + { SEC_ASN1_INTEGER, + offsetof(SEC_PKCS7SignedData, version) }, + { SEC_ASN1_SET_OF | SEC_ASN1_XTRN, + offsetof(SEC_PKCS7SignedData, digestAlgorithms), + SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) }, + { SEC_ASN1_INLINE, + offsetof(SEC_PKCS7SignedData, contentInfo), + sec_PKCS7ContentInfoTemplate }, + { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | + SEC_ASN1_XTRN | 0, + offsetof(SEC_PKCS7SignedData, rawCerts), + SEC_ASN1_SUB(SEC_SetOfAnyTemplate) }, + { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | + SEC_ASN1_XTRN | 1, + offsetof(SEC_PKCS7SignedData, crls), + SEC_ASN1_SUB(CERT_SetOfSignedCrlTemplate) }, + { SEC_ASN1_SET_OF, + offsetof(SEC_PKCS7SignedData, signerInfos), + SEC_PKCS7SignerInfoTemplate }, + { 0 } +}; + +static const SEC_ASN1Template SEC_PointerToPKCS7SignedDataTemplate[] = { + { SEC_ASN1_POINTER, 0, SEC_PKCS7SignedDataTemplate } +}; + +static const SEC_ASN1Template SEC_PKCS7RecipientInfoTemplate[] = { + { SEC_ASN1_SEQUENCE, + 0, NULL, sizeof(SEC_PKCS7RecipientInfo) }, + { SEC_ASN1_INTEGER, + offsetof(SEC_PKCS7RecipientInfo, version) }, + { SEC_ASN1_POINTER | SEC_ASN1_XTRN, + offsetof(SEC_PKCS7RecipientInfo, issuerAndSN), + SEC_ASN1_SUB(CERT_IssuerAndSNTemplate) }, + { SEC_ASN1_INLINE | SEC_ASN1_XTRN, + offsetof(SEC_PKCS7RecipientInfo, keyEncAlg), + SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) }, + { SEC_ASN1_OCTET_STRING, + offsetof(SEC_PKCS7RecipientInfo, encKey) }, + { 0 } +}; + +static const SEC_ASN1Template SEC_PKCS7EncryptedContentInfoTemplate[] = { + { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM, + 0, NULL, sizeof(SEC_PKCS7EncryptedContentInfo) }, + { SEC_ASN1_OBJECT_ID, + offsetof(SEC_PKCS7EncryptedContentInfo, contentType) }, + { SEC_ASN1_INLINE | SEC_ASN1_XTRN, + offsetof(SEC_PKCS7EncryptedContentInfo, contentEncAlg), + SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) }, + { SEC_ASN1_OPTIONAL | SEC_ASN1_MAY_STREAM | SEC_ASN1_CONTEXT_SPECIFIC | + SEC_ASN1_XTRN | 0, + offsetof(SEC_PKCS7EncryptedContentInfo, encContent), + SEC_ASN1_SUB(SEC_OctetStringTemplate) }, + { 0 } +}; + +static const SEC_ASN1Template SEC_PKCS7EnvelopedDataTemplate[] = { + { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM, + 0, NULL, sizeof(SEC_PKCS7EnvelopedData) }, + { SEC_ASN1_INTEGER, + offsetof(SEC_PKCS7EnvelopedData, version) }, + { SEC_ASN1_SET_OF, + offsetof(SEC_PKCS7EnvelopedData, recipientInfos), + SEC_PKCS7RecipientInfoTemplate }, + { SEC_ASN1_INLINE, + offsetof(SEC_PKCS7EnvelopedData, encContentInfo), + SEC_PKCS7EncryptedContentInfoTemplate }, + { 0 } +}; + +static const SEC_ASN1Template SEC_PointerToPKCS7EnvelopedDataTemplate[] = { + { SEC_ASN1_POINTER, 0, SEC_PKCS7EnvelopedDataTemplate } +}; + +static const SEC_ASN1Template SEC_PKCS7SignedAndEnvelopedDataTemplate[] = { + { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM, + 0, NULL, sizeof(SEC_PKCS7SignedAndEnvelopedData) }, + { SEC_ASN1_INTEGER, + offsetof(SEC_PKCS7SignedAndEnvelopedData, version) }, + { SEC_ASN1_SET_OF, + offsetof(SEC_PKCS7SignedAndEnvelopedData, recipientInfos), + SEC_PKCS7RecipientInfoTemplate }, + { SEC_ASN1_SET_OF | SEC_ASN1_XTRN, + offsetof(SEC_PKCS7SignedAndEnvelopedData, digestAlgorithms), + SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) }, + { SEC_ASN1_INLINE, + offsetof(SEC_PKCS7SignedAndEnvelopedData, encContentInfo), + SEC_PKCS7EncryptedContentInfoTemplate }, + { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | + SEC_ASN1_XTRN | 0, + offsetof(SEC_PKCS7SignedAndEnvelopedData, rawCerts), + SEC_ASN1_SUB(SEC_SetOfAnyTemplate) }, + { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | + SEC_ASN1_XTRN | 1, + offsetof(SEC_PKCS7SignedAndEnvelopedData, crls), + SEC_ASN1_SUB(CERT_SetOfSignedCrlTemplate) }, + { SEC_ASN1_SET_OF, + offsetof(SEC_PKCS7SignedAndEnvelopedData, signerInfos), + SEC_PKCS7SignerInfoTemplate }, + { 0 } +}; + +static const SEC_ASN1Template + SEC_PointerToPKCS7SignedAndEnvelopedDataTemplate[] = { + { SEC_ASN1_POINTER, 0, SEC_PKCS7SignedAndEnvelopedDataTemplate } + }; + +static const SEC_ASN1Template SEC_PKCS7DigestedDataTemplate[] = { + { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM, + 0, NULL, sizeof(SEC_PKCS7DigestedData) }, + { SEC_ASN1_INTEGER, + offsetof(SEC_PKCS7DigestedData, version) }, + { SEC_ASN1_INLINE | SEC_ASN1_XTRN, + offsetof(SEC_PKCS7DigestedData, digestAlg), + SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) }, + { SEC_ASN1_INLINE, + offsetof(SEC_PKCS7DigestedData, contentInfo), + sec_PKCS7ContentInfoTemplate }, + { SEC_ASN1_OCTET_STRING, + offsetof(SEC_PKCS7DigestedData, digest) }, + { 0 } +}; + +static const SEC_ASN1Template SEC_PointerToPKCS7DigestedDataTemplate[] = { + { SEC_ASN1_POINTER, 0, SEC_PKCS7DigestedDataTemplate } +}; + +static const SEC_ASN1Template SEC_PKCS7EncryptedDataTemplate[] = { + { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM, + 0, NULL, sizeof(SEC_PKCS7EncryptedData) }, + { SEC_ASN1_INTEGER, + offsetof(SEC_PKCS7EncryptedData, version) }, + { SEC_ASN1_INLINE, + offsetof(SEC_PKCS7EncryptedData, encContentInfo), + SEC_PKCS7EncryptedContentInfoTemplate }, + { 0 } +}; + +static const SEC_ASN1Template SEC_PointerToPKCS7EncryptedDataTemplate[] = { + { SEC_ASN1_POINTER, 0, SEC_PKCS7EncryptedDataTemplate } +}; + +static const SEC_ASN1Template * +sec_pkcs7_choose_content_template(void *src_or_dest, PRBool encoding) +{ + const SEC_ASN1Template *theTemplate; + SEC_PKCS7ContentInfo *cinfo; + SECOidTag kind; + + PORT_Assert(src_or_dest != NULL); + if (src_or_dest == NULL) + return NULL; + + cinfo = (SEC_PKCS7ContentInfo *)src_or_dest; + kind = SEC_PKCS7ContentType(cinfo); + switch (kind) { + default: + theTemplate = SEC_ASN1_GET(SEC_PointerToAnyTemplate); + break; + case SEC_OID_PKCS7_DATA: + theTemplate = SEC_ASN1_GET(SEC_PointerToOctetStringTemplate); + break; + case SEC_OID_PKCS7_SIGNED_DATA: + theTemplate = SEC_PointerToPKCS7SignedDataTemplate; + break; + case SEC_OID_PKCS7_ENVELOPED_DATA: + theTemplate = SEC_PointerToPKCS7EnvelopedDataTemplate; + break; + case SEC_OID_PKCS7_SIGNED_ENVELOPED_DATA: + theTemplate = SEC_PointerToPKCS7SignedAndEnvelopedDataTemplate; + break; + case SEC_OID_PKCS7_DIGESTED_DATA: + theTemplate = SEC_PointerToPKCS7DigestedDataTemplate; + break; + case SEC_OID_PKCS7_ENCRYPTED_DATA: + theTemplate = SEC_PointerToPKCS7EncryptedDataTemplate; + break; + } + return theTemplate; +} + +/* + * End of templates. Do not add stuff after this; put new code + * up above the start of the template definitions. + */ -- cgit v1.2.3