From 5f8de423f190bbb79a62f804151bc24824fa32d8 Mon Sep 17 00:00:00 2001 From: "Matt A. Tobin" Date: Fri, 2 Feb 2018 04:16:08 -0500 Subject: Add m-esr52 at 52.6.0 --- layout/base/nsCSSRendering.cpp | 6138 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 6138 insertions(+) create mode 100644 layout/base/nsCSSRendering.cpp (limited to 'layout/base/nsCSSRendering.cpp') diff --git a/layout/base/nsCSSRendering.cpp b/layout/base/nsCSSRendering.cpp new file mode 100644 index 000000000..1c6d97395 --- /dev/null +++ b/layout/base/nsCSSRendering.cpp @@ -0,0 +1,6138 @@ +/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +// vim:cindent:ts=2:et:sw=2: +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +/* utility functions for drawing borders and backgrounds */ + +#include + +#include "gfx2DGlue.h" +#include "mozilla/ArrayUtils.h" +#include "mozilla/DebugOnly.h" +#include "mozilla/gfx/2D.h" +#include "mozilla/gfx/Helpers.h" +#include "mozilla/gfx/PathHelpers.h" +#include "mozilla/HashFunctions.h" +#include "mozilla/MathAlgorithms.h" + +#include "BorderConsts.h" +#include "nsISVGChildFrame.h" +#include "nsStyleConsts.h" +#include "nsPresContext.h" +#include "nsIFrame.h" +#include "nsPoint.h" +#include "nsRect.h" +#include "nsIPresShell.h" +#include "nsFrameManager.h" +#include "nsStyleContext.h" +#include "nsGkAtoms.h" +#include "nsCSSAnonBoxes.h" +#include "nsIContent.h" +#include "nsIDocumentInlines.h" +#include "nsIScrollableFrame.h" +#include "imgIRequest.h" +#include "imgIContainer.h" +#include "ImageOps.h" +#include "nsCSSRendering.h" +#include "nsCSSColorUtils.h" +#include "nsITheme.h" +#include "nsThemeConstants.h" +#include "nsLayoutUtils.h" +#include "nsBlockFrame.h" +#include "gfxContext.h" +#include "nsRenderingContext.h" +#include "nsStyleStructInlines.h" +#include "nsCSSFrameConstructor.h" +#include "nsCSSProps.h" +#include "nsContentUtils.h" +#include "nsSVGEffects.h" +#include "nsSVGIntegrationUtils.h" +#include "gfxDrawable.h" +#include "GeckoProfiler.h" +#include "nsCSSRenderingBorders.h" +#include "mozilla/css/ImageLoader.h" +#include "ImageContainer.h" +#include "mozilla/Telemetry.h" +#include "gfxUtils.h" +#include "gfxGradientCache.h" +#include "nsInlineFrame.h" +#include "nsRubyTextContainerFrame.h" +#include + +using namespace mozilla; +using namespace mozilla::css; +using namespace mozilla::gfx; +using namespace mozilla::image; +using mozilla::CSSSizeOrRatio; + +static int gFrameTreeLockCount = 0; + +// To avoid storing this data on nsInlineFrame (bloat) and to avoid +// recalculating this for each frame in a continuation (perf), hold +// a cache of various coordinate information that we need in order +// to paint inline backgrounds. +struct InlineBackgroundData +{ + InlineBackgroundData() + : mFrame(nullptr), mLineContainer(nullptr) + { + } + + ~InlineBackgroundData() + { + } + + void Reset() + { + mBoundingBox.SetRect(0,0,0,0); + mContinuationPoint = mLineContinuationPoint = mUnbrokenMeasure = 0; + mFrame = mLineContainer = nullptr; + mPIStartBorderData.Reset(); + } + + /** + * Return a continuous rect for (an inline) aFrame relative to the + * continuation that draws the left-most part of the background. + * This is used when painting backgrounds. + */ + nsRect GetContinuousRect(nsIFrame* aFrame) + { + MOZ_ASSERT(static_cast(do_QueryFrame(aFrame))); + + SetFrame(aFrame); + + nscoord pos; // an x coordinate if writing-mode is horizontal; + // y coordinate if vertical + if (mBidiEnabled) { + pos = mLineContinuationPoint; + + // Scan continuations on the same line as aFrame and accumulate the widths + // of frames that are to the left (if this is an LTR block) or right + // (if it's RTL) of the current one. + bool isRtlBlock = (mLineContainer->StyleVisibility()->mDirection == + NS_STYLE_DIRECTION_RTL); + nscoord curOffset = mVertical ? aFrame->GetOffsetTo(mLineContainer).y + : aFrame->GetOffsetTo(mLineContainer).x; + + // If the continuation is fluid we know inlineFrame is not on the same line. + // If it's not fluid, we need to test further to be sure. + nsIFrame* inlineFrame = aFrame->GetPrevContinuation(); + while (inlineFrame && !inlineFrame->GetNextInFlow() && + AreOnSameLine(aFrame, inlineFrame)) { + nscoord frameOffset = mVertical + ? inlineFrame->GetOffsetTo(mLineContainer).y + : inlineFrame->GetOffsetTo(mLineContainer).x; + if (isRtlBlock == (frameOffset >= curOffset)) { + pos += mVertical + ? inlineFrame->GetSize().height + : inlineFrame->GetSize().width; + } + inlineFrame = inlineFrame->GetPrevContinuation(); + } + + inlineFrame = aFrame->GetNextContinuation(); + while (inlineFrame && !inlineFrame->GetPrevInFlow() && + AreOnSameLine(aFrame, inlineFrame)) { + nscoord frameOffset = mVertical + ? inlineFrame->GetOffsetTo(mLineContainer).y + : inlineFrame->GetOffsetTo(mLineContainer).x; + if (isRtlBlock == (frameOffset >= curOffset)) { + pos += mVertical + ? inlineFrame->GetSize().height + : inlineFrame->GetSize().width; + } + inlineFrame = inlineFrame->GetNextContinuation(); + } + if (isRtlBlock) { + // aFrame itself is also to the right of its left edge, so add its width. + pos += mVertical ? aFrame->GetSize().height : aFrame->GetSize().width; + // pos is now the distance from the left [top] edge of aFrame to the right [bottom] edge + // of the unbroken content. Change it to indicate the distance from the + // left [top] edge of the unbroken content to the left [top] edge of aFrame. + pos = mUnbrokenMeasure - pos; + } + } else { + pos = mContinuationPoint; + } + + // Assume background-origin: border and return a rect with offsets + // relative to (0,0). If we have a different background-origin, + // then our rect should be deflated appropriately by our caller. + return mVertical + ? nsRect(0, -pos, mFrame->GetSize().width, mUnbrokenMeasure) + : nsRect(-pos, 0, mUnbrokenMeasure, mFrame->GetSize().height); + } + + /** + * Return a continuous rect for (an inline) aFrame relative to the + * continuation that should draw the left[top]-border. This is used when painting + * borders and clipping backgrounds. This may NOT be the same continuous rect + * as for drawing backgrounds; the continuation with the left[top]-border might be + * somewhere in the middle of that rect (e.g. BIDI), in those cases we need + * the reverse background order starting at the left[top]-border continuation. + */ + nsRect GetBorderContinuousRect(nsIFrame* aFrame, nsRect aBorderArea) + { + // Calling GetContinuousRect(aFrame) here may lead to Reset/Init which + // resets our mPIStartBorderData so we save it ... + PhysicalInlineStartBorderData saved(mPIStartBorderData); + nsRect joinedBorderArea = GetContinuousRect(aFrame); + if (!saved.mIsValid || saved.mFrame != mPIStartBorderData.mFrame) { + if (aFrame == mPIStartBorderData.mFrame) { + if (mVertical) { + mPIStartBorderData.SetCoord(joinedBorderArea.y); + } else { + mPIStartBorderData.SetCoord(joinedBorderArea.x); + } + } else if (mPIStartBorderData.mFrame) { + if (mVertical) { + mPIStartBorderData.SetCoord(GetContinuousRect(mPIStartBorderData.mFrame).y); + } else { + mPIStartBorderData.SetCoord(GetContinuousRect(mPIStartBorderData.mFrame).x); + } + } + } else { + // ... and restore it when possible. + mPIStartBorderData.mCoord = saved.mCoord; + } + if (mVertical) { + if (joinedBorderArea.y > mPIStartBorderData.mCoord) { + joinedBorderArea.y = + -(mUnbrokenMeasure + joinedBorderArea.y - aBorderArea.height); + } else { + joinedBorderArea.y -= mPIStartBorderData.mCoord; + } + } else { + if (joinedBorderArea.x > mPIStartBorderData.mCoord) { + joinedBorderArea.x = + -(mUnbrokenMeasure + joinedBorderArea.x - aBorderArea.width); + } else { + joinedBorderArea.x -= mPIStartBorderData.mCoord; + } + } + return joinedBorderArea; + } + + nsRect GetBoundingRect(nsIFrame* aFrame) + { + SetFrame(aFrame); + + // Move the offsets relative to (0,0) which puts the bounding box into + // our coordinate system rather than our parent's. We do this by + // moving it the back distance from us to the bounding box. + // This also assumes background-origin: border, so our caller will + // need to deflate us if needed. + nsRect boundingBox(mBoundingBox); + nsPoint point = mFrame->GetPosition(); + boundingBox.MoveBy(-point.x, -point.y); + + return boundingBox; + } + +protected: + // This is a coordinate on the inline axis, but is not a true logical inline- + // coord because it is always measured from left to right (if horizontal) or + // from top to bottom (if vertical), ignoring any bidi RTL directionality. + // We'll call this "physical inline start", or PIStart for short. + struct PhysicalInlineStartBorderData { + nsIFrame* mFrame; // the continuation that may have a left-border + nscoord mCoord; // cached GetContinuousRect(mFrame).x or .y + bool mIsValid; // true if mCoord is valid + void Reset() { mFrame = nullptr; mIsValid = false; } + void SetCoord(nscoord aCoord) { mCoord = aCoord; mIsValid = true; } + }; + + nsIFrame* mFrame; + nsIFrame* mLineContainer; + nsRect mBoundingBox; + nscoord mContinuationPoint; + nscoord mUnbrokenMeasure; + nscoord mLineContinuationPoint; + PhysicalInlineStartBorderData mPIStartBorderData; + bool mBidiEnabled; + bool mVertical; + + void SetFrame(nsIFrame* aFrame) + { + NS_PRECONDITION(aFrame, "Need a frame"); + NS_ASSERTION(gFrameTreeLockCount > 0, + "Can't call this when frame tree is not locked"); + + if (aFrame == mFrame) { + return; + } + + nsIFrame *prevContinuation = GetPrevContinuation(aFrame); + + if (!prevContinuation || mFrame != prevContinuation) { + // Ok, we've got the wrong frame. We have to start from scratch. + Reset(); + Init(aFrame); + return; + } + + // Get our last frame's size and add its width to our continuation + // point before we cache the new frame. + mContinuationPoint += mVertical ? mFrame->GetSize().height + : mFrame->GetSize().width; + + // If this a new line, update mLineContinuationPoint. + if (mBidiEnabled && + (aFrame->GetPrevInFlow() || !AreOnSameLine(mFrame, aFrame))) { + mLineContinuationPoint = mContinuationPoint; + } + + mFrame = aFrame; + } + + nsIFrame* GetPrevContinuation(nsIFrame* aFrame) + { + nsIFrame* prevCont = aFrame->GetPrevContinuation(); + if (!prevCont && + (aFrame->GetStateBits() & NS_FRAME_PART_OF_IBSPLIT)) { + nsIFrame* block = + aFrame->Properties().Get(nsIFrame::IBSplitPrevSibling()); + if (block) { + // The {ib} properties are only stored on first continuations + NS_ASSERTION(!block->GetPrevContinuation(), + "Incorrect value for IBSplitPrevSibling"); + prevCont = + block->Properties().Get(nsIFrame::IBSplitPrevSibling()); + NS_ASSERTION(prevCont, "How did that happen?"); + } + } + return prevCont; + } + + nsIFrame* GetNextContinuation(nsIFrame* aFrame) + { + nsIFrame* nextCont = aFrame->GetNextContinuation(); + if (!nextCont && + (aFrame->GetStateBits() & NS_FRAME_PART_OF_IBSPLIT)) { + // The {ib} properties are only stored on first continuations + aFrame = aFrame->FirstContinuation(); + nsIFrame* block = aFrame->Properties().Get(nsIFrame::IBSplitSibling()); + if (block) { + nextCont = block->Properties().Get(nsIFrame::IBSplitSibling()); + NS_ASSERTION(nextCont, "How did that happen?"); + } + } + return nextCont; + } + + void Init(nsIFrame* aFrame) + { + mPIStartBorderData.Reset(); + mBidiEnabled = aFrame->PresContext()->BidiEnabled(); + if (mBidiEnabled) { + // Find the line container frame + mLineContainer = aFrame; + while (mLineContainer && + mLineContainer->IsFrameOfType(nsIFrame::eLineParticipant)) { + mLineContainer = mLineContainer->GetParent(); + } + + MOZ_ASSERT(mLineContainer, "Cannot find line containing frame."); + MOZ_ASSERT(mLineContainer != aFrame, "line container frame " + "should be an ancestor of the target frame."); + } + + mVertical = aFrame->GetWritingMode().IsVertical(); + + // Start with the previous flow frame as our continuation point + // is the total of the widths of the previous frames. + nsIFrame* inlineFrame = GetPrevContinuation(aFrame); + while (inlineFrame) { + if (!mPIStartBorderData.mFrame && + !(mVertical ? inlineFrame->GetSkipSides().Top() + : inlineFrame->GetSkipSides().Left())) { + mPIStartBorderData.mFrame = inlineFrame; + } + nsRect rect = inlineFrame->GetRect(); + mContinuationPoint += mVertical ? rect.height : rect.width; + if (mBidiEnabled && !AreOnSameLine(aFrame, inlineFrame)) { + mLineContinuationPoint += mVertical ? rect.height : rect.width; + } + mUnbrokenMeasure += mVertical ? rect.height : rect.width; + mBoundingBox.UnionRect(mBoundingBox, rect); + inlineFrame = GetPrevContinuation(inlineFrame); + } + + // Next add this frame and subsequent frames to the bounding box and + // unbroken width. + inlineFrame = aFrame; + while (inlineFrame) { + if (!mPIStartBorderData.mFrame && + !(mVertical ? inlineFrame->GetSkipSides().Top() + : inlineFrame->GetSkipSides().Left())) { + mPIStartBorderData.mFrame = inlineFrame; + } + nsRect rect = inlineFrame->GetRect(); + mUnbrokenMeasure += mVertical ? rect.height : rect.width; + mBoundingBox.UnionRect(mBoundingBox, rect); + inlineFrame = GetNextContinuation(inlineFrame); + } + + mFrame = aFrame; + } + + bool AreOnSameLine(nsIFrame* aFrame1, nsIFrame* aFrame2) { + if (nsBlockFrame* blockFrame = do_QueryFrame(mLineContainer)) { + bool isValid1, isValid2; + nsBlockInFlowLineIterator it1(blockFrame, aFrame1, &isValid1); + nsBlockInFlowLineIterator it2(blockFrame, aFrame2, &isValid2); + return isValid1 && isValid2 && + // Make sure aFrame1 and aFrame2 are in the same continuation of + // blockFrame. + it1.GetContainer() == it2.GetContainer() && + // And on the same line in it + it1.GetLine() == it2.GetLine(); + } + if (nsRubyTextContainerFrame* rtcFrame = do_QueryFrame(mLineContainer)) { + nsBlockFrame* block = nsLayoutUtils::FindNearestBlockAncestor(rtcFrame); + // Ruby text container can only hold one line of text, so if they + // are in the same continuation, they are in the same line. Since + // ruby text containers are bidi isolate, they are never split for + // bidi reordering, which means being in different continuation + // indicates being in different lines. + for (nsIFrame* frame = rtcFrame->FirstContinuation(); + frame; frame = frame->GetNextContinuation()) { + bool isDescendant1 = + nsLayoutUtils::IsProperAncestorFrame(frame, aFrame1, block); + bool isDescendant2 = + nsLayoutUtils::IsProperAncestorFrame(frame, aFrame2, block); + if (isDescendant1 && isDescendant2) { + return true; + } + if (isDescendant1 || isDescendant2) { + return false; + } + } + MOZ_ASSERT_UNREACHABLE("None of the frames is a descendant of this rtc?"); + } + MOZ_ASSERT_UNREACHABLE("Do we have any other type of line container?"); + return false; + } +}; + +// A resolved color stop, with a specific position along the gradient line and +// a color. +struct ColorStop { + ColorStop(): mPosition(0), mIsMidpoint(false) {} + ColorStop(double aPosition, bool aIsMidPoint, const Color& aColor) : + mPosition(aPosition), mIsMidpoint(aIsMidPoint), mColor(aColor) {} + double mPosition; // along the gradient line; 0=start, 1=end + bool mIsMidpoint; + Color mColor; +}; + +/* Local functions */ +static DrawResult DrawBorderImage(nsPresContext* aPresContext, + nsRenderingContext& aRenderingContext, + nsIFrame* aForFrame, + const nsRect& aBorderArea, + const nsStyleBorder& aStyleBorder, + const nsRect& aDirtyRect, + Sides aSkipSides, + PaintBorderFlags aFlags); + +static nscolor MakeBevelColor(mozilla::css::Side whichSide, uint8_t style, + nscolor aBackgroundColor, + nscolor aBorderColor); + +static InlineBackgroundData* gInlineBGData = nullptr; + +// Initialize any static variables used by nsCSSRendering. +void nsCSSRendering::Init() +{ + NS_ASSERTION(!gInlineBGData, "Init called twice"); + gInlineBGData = new InlineBackgroundData(); +} + +// Clean up any global variables used by nsCSSRendering. +void nsCSSRendering::Shutdown() +{ + delete gInlineBGData; + gInlineBGData = nullptr; +} + +/** + * Make a bevel color + */ +static nscolor +MakeBevelColor(mozilla::css::Side whichSide, uint8_t style, + nscolor aBackgroundColor, nscolor aBorderColor) +{ + + nscolor colors[2]; + nscolor theColor; + + // Given a background color and a border color + // calculate the color used for the shading + NS_GetSpecial3DColors(colors, aBackgroundColor, aBorderColor); + + if ((style == NS_STYLE_BORDER_STYLE_OUTSET) || + (style == NS_STYLE_BORDER_STYLE_RIDGE)) { + // Flip colors for these two border styles + switch (whichSide) { + case NS_SIDE_BOTTOM: whichSide = NS_SIDE_TOP; break; + case NS_SIDE_RIGHT: whichSide = NS_SIDE_LEFT; break; + case NS_SIDE_TOP: whichSide = NS_SIDE_BOTTOM; break; + case NS_SIDE_LEFT: whichSide = NS_SIDE_RIGHT; break; + } + } + + switch (whichSide) { + case NS_SIDE_BOTTOM: + theColor = colors[1]; + break; + case NS_SIDE_RIGHT: + theColor = colors[1]; + break; + case NS_SIDE_TOP: + theColor = colors[0]; + break; + case NS_SIDE_LEFT: + default: + theColor = colors[0]; + break; + } + return theColor; +} + +static bool +GetRadii(nsIFrame* aForFrame, const nsStyleBorder& aBorder, + const nsRect& aOrigBorderArea, const nsRect& aBorderArea, + nscoord aRadii[8]) +{ + bool haveRoundedCorners; + nsSize sz = aBorderArea.Size(); + nsSize frameSize = aForFrame->GetSize(); + if (&aBorder == aForFrame->StyleBorder() && + frameSize == aOrigBorderArea.Size()) { + haveRoundedCorners = aForFrame->GetBorderRadii(sz, sz, Sides(), aRadii); + } else { + haveRoundedCorners = + nsIFrame::ComputeBorderRadii(aBorder.mBorderRadius, frameSize, sz, Sides(), aRadii); + } + + return haveRoundedCorners; +} + +static bool +GetRadii(nsIFrame* aForFrame, const nsStyleBorder& aBorder, + const nsRect& aOrigBorderArea, const nsRect& aBorderArea, + RectCornerRadii* aBgRadii) +{ + nscoord radii[8]; + bool haveRoundedCorners = GetRadii(aForFrame, aBorder, aOrigBorderArea, aBorderArea, radii); + + if (haveRoundedCorners) { + auto d2a = aForFrame->PresContext()->AppUnitsPerDevPixel(); + nsCSSRendering::ComputePixelRadii(radii, d2a, aBgRadii); + } + return haveRoundedCorners; +} + +static nsRect +JoinBoxesForVerticalSlice(nsIFrame* aFrame, const nsRect& aBorderArea) +{ + // Inflate vertically as if our continuations were laid out vertically + // adjacent. Note that we don't touch the width. + nsRect borderArea = aBorderArea; + nscoord h = 0; + nsIFrame* f = aFrame->GetNextContinuation(); + for (; f; f = f->GetNextContinuation()) { + MOZ_ASSERT(!(f->GetStateBits() & NS_FRAME_PART_OF_IBSPLIT), + "anonymous ib-split block shouldn't have border/background"); + h += f->GetRect().height; + } + borderArea.height += h; + h = 0; + f = aFrame->GetPrevContinuation(); + for (; f; f = f->GetPrevContinuation()) { + MOZ_ASSERT(!(f->GetStateBits() & NS_FRAME_PART_OF_IBSPLIT), + "anonymous ib-split block shouldn't have border/background"); + h += f->GetRect().height; + } + borderArea.y -= h; + borderArea.height += h; + return borderArea; +} + +/** + * Inflate aBorderArea which is relative to aFrame's origin to calculate + * a hypothetical non-split frame area for all the continuations. + * See "Joining Boxes for 'slice'" in + * http://dev.w3.org/csswg/css-break/#break-decoration + */ +enum InlineBoxOrder { eForBorder, eForBackground }; +static nsRect +JoinBoxesForSlice(nsIFrame* aFrame, const nsRect& aBorderArea, + InlineBoxOrder aOrder) +{ + if (static_cast(do_QueryFrame(aFrame))) { + return (aOrder == eForBorder + ? gInlineBGData->GetBorderContinuousRect(aFrame, aBorderArea) + : gInlineBGData->GetContinuousRect(aFrame)) + + aBorderArea.TopLeft(); + } + return JoinBoxesForVerticalSlice(aFrame, aBorderArea); +} + +static bool +IsBoxDecorationSlice(const nsStyleBorder& aStyleBorder) +{ + return aStyleBorder.mBoxDecorationBreak == StyleBoxDecorationBreak::Slice; +} + +static nsRect +BoxDecorationRectForBorder(nsIFrame* aFrame, const nsRect& aBorderArea, + Sides aSkipSides, + const nsStyleBorder* aStyleBorder = nullptr) +{ + if (!aStyleBorder) { + aStyleBorder = aFrame->StyleBorder(); + } + // If aSkipSides.IsEmpty() then there are no continuations, or it's + // a ::first-letter that wants all border sides on the first continuation. + return ::IsBoxDecorationSlice(*aStyleBorder) && !aSkipSides.IsEmpty() + ? ::JoinBoxesForSlice(aFrame, aBorderArea, eForBorder) + : aBorderArea; +} + +static nsRect +BoxDecorationRectForBackground(nsIFrame* aFrame, const nsRect& aBorderArea, + Sides aSkipSides, + const nsStyleBorder* aStyleBorder = nullptr) +{ + if (!aStyleBorder) { + aStyleBorder = aFrame->StyleBorder(); + } + // If aSkipSides.IsEmpty() then there are no continuations, or it's + // a ::first-letter that wants all border sides on the first continuation. + return ::IsBoxDecorationSlice(*aStyleBorder) && !aSkipSides.IsEmpty() + ? ::JoinBoxesForSlice(aFrame, aBorderArea, eForBackground) + : aBorderArea; +} + +//---------------------------------------------------------------------- +// Thebes Border Rendering Code Start + +/* + * Compute the float-pixel radii that should be used for drawing + * this border/outline, given the various input bits. + */ +/* static */ void +nsCSSRendering::ComputePixelRadii(const nscoord *aAppUnitsRadii, + nscoord aAppUnitsPerPixel, + RectCornerRadii *oBorderRadii) +{ + Float radii[8]; + NS_FOR_CSS_HALF_CORNERS(corner) + radii[corner] = Float(aAppUnitsRadii[corner]) / aAppUnitsPerPixel; + + (*oBorderRadii)[C_TL] = Size(radii[NS_CORNER_TOP_LEFT_X], + radii[NS_CORNER_TOP_LEFT_Y]); + (*oBorderRadii)[C_TR] = Size(radii[NS_CORNER_TOP_RIGHT_X], + radii[NS_CORNER_TOP_RIGHT_Y]); + (*oBorderRadii)[C_BR] = Size(radii[NS_CORNER_BOTTOM_RIGHT_X], + radii[NS_CORNER_BOTTOM_RIGHT_Y]); + (*oBorderRadii)[C_BL] = Size(radii[NS_CORNER_BOTTOM_LEFT_X], + radii[NS_CORNER_BOTTOM_LEFT_Y]); +} + +DrawResult +nsCSSRendering::PaintBorder(nsPresContext* aPresContext, + nsRenderingContext& aRenderingContext, + nsIFrame* aForFrame, + const nsRect& aDirtyRect, + const nsRect& aBorderArea, + nsStyleContext* aStyleContext, + PaintBorderFlags aFlags, + Sides aSkipSides) +{ + PROFILER_LABEL("nsCSSRendering", "PaintBorder", + js::ProfileEntry::Category::GRAPHICS); + + nsStyleContext *styleIfVisited = aStyleContext->GetStyleIfVisited(); + const nsStyleBorder *styleBorder = aStyleContext->StyleBorder(); + // Don't check RelevantLinkVisited here, since we want to take the + // same amount of time whether or not it's true. + if (!styleIfVisited) { + return PaintBorderWithStyleBorder(aPresContext, aRenderingContext, aForFrame, + aDirtyRect, aBorderArea, *styleBorder, + aStyleContext, aFlags, aSkipSides); + } + + nsStyleBorder newStyleBorder(*styleBorder); + + NS_FOR_CSS_SIDES(side) { + nscolor color = aStyleContext->GetVisitedDependentColor( + nsCSSProps::SubpropertyEntryFor(eCSSProperty_border_color)[side]); + newStyleBorder.mBorderColor[side] = StyleComplexColor::FromColor(color); + } + DrawResult result = + PaintBorderWithStyleBorder(aPresContext, aRenderingContext, aForFrame, + aDirtyRect, aBorderArea, newStyleBorder, + aStyleContext, aFlags, aSkipSides); + + return result; +} + +DrawResult +nsCSSRendering::PaintBorderWithStyleBorder(nsPresContext* aPresContext, + nsRenderingContext& aRenderingContext, + nsIFrame* aForFrame, + const nsRect& aDirtyRect, + const nsRect& aBorderArea, + const nsStyleBorder& aStyleBorder, + nsStyleContext* aStyleContext, + PaintBorderFlags aFlags, + Sides aSkipSides) +{ + DrawTarget& aDrawTarget = *aRenderingContext.GetDrawTarget(); + + PrintAsStringNewline("++ PaintBorder"); + + // Check to see if we have an appearance defined. If so, we let the theme + // renderer draw the border. DO not get the data from aForFrame, since the passed in style context + // may be different! Always use |aStyleContext|! + const nsStyleDisplay* displayData = aStyleContext->StyleDisplay(); + if (displayData->mAppearance) { + nsITheme *theme = aPresContext->GetTheme(); + if (theme && + theme->ThemeSupportsWidget(aPresContext, aForFrame, + displayData->mAppearance)) { + return DrawResult::SUCCESS; // Let the theme handle it. + } + } + + if (aStyleBorder.IsBorderImageLoaded()) { + return DrawBorderImage(aPresContext, aRenderingContext, aForFrame, + aBorderArea, aStyleBorder, aDirtyRect, + aSkipSides, aFlags); + } + + DrawResult result = DrawResult::SUCCESS; + + // If we had a border-image, but it wasn't loaded, then we should return + // DrawResult::NOT_READY; we'll want to try again if we do a paint with sync + // decoding enabled. + if (aStyleBorder.mBorderImageSource.GetType() != eStyleImageType_Null) { + result = DrawResult::NOT_READY; + } + + // Get our style context's color struct. + const nsStyleColor* ourColor = aStyleContext->StyleColor(); + + // In NavQuirks mode we want to use the parent's context as a starting point + // for determining the background color. + bool quirks = aPresContext->CompatibilityMode() == eCompatibility_NavQuirks; + nsIFrame* bgFrame = FindNonTransparentBackgroundFrame(aForFrame, quirks); + nsStyleContext* bgContext = bgFrame->StyleContext(); + nscolor bgColor = + bgContext->GetVisitedDependentColor(eCSSProperty_background_color); + + nsMargin border = aStyleBorder.GetComputedBorder(); + if (0 == border.left && 0 == border.right && + 0 == border.top && 0 == border.bottom) { + // Empty border area + return result; + } + + // Compute the outermost boundary of the area that might be painted. + // Same coordinate space as aBorderArea & aBGClipRect. + nsRect joinedBorderArea = + ::BoxDecorationRectForBorder(aForFrame, aBorderArea, aSkipSides, &aStyleBorder); + RectCornerRadii bgRadii; + ::GetRadii(aForFrame, aStyleBorder, aBorderArea, joinedBorderArea, &bgRadii); + + PrintAsFormatString(" joinedBorderArea: %d %d %d %d\n", joinedBorderArea.x, joinedBorderArea.y, + joinedBorderArea.width, joinedBorderArea.height); + + // start drawing + bool needToPopClip = false; + + if (::IsBoxDecorationSlice(aStyleBorder)) { + if (joinedBorderArea.IsEqualEdges(aBorderArea)) { + // No need for a clip, just skip the sides we don't want. + border.ApplySkipSides(aSkipSides); + } else { + // We're drawing borders around the joined continuation boxes so we need + // to clip that to the slice that we want for this frame. + aDrawTarget.PushClipRect( + NSRectToSnappedRect(aBorderArea, + aForFrame->PresContext()->AppUnitsPerDevPixel(), + aDrawTarget)); + needToPopClip = true; + } + } else { + MOZ_ASSERT(joinedBorderArea.IsEqualEdges(aBorderArea), + "Should use aBorderArea for box-decoration-break:clone"); + MOZ_ASSERT(aForFrame->GetSkipSides().IsEmpty() || + IS_TRUE_OVERFLOW_CONTAINER(aForFrame), + "Should not skip sides for box-decoration-break:clone except " + "::first-letter/line continuations or other frame types that " + "don't have borders but those shouldn't reach this point. " + "Overflow containers do reach this point though."); + border.ApplySkipSides(aSkipSides); + } + + // Convert to dev pixels. + nscoord twipsPerPixel = aPresContext->DevPixelsToAppUnits(1); + Rect joinedBorderAreaPx = NSRectToRect(joinedBorderArea, twipsPerPixel); + Float borderWidths[4] = { Float(border.top / twipsPerPixel), + Float(border.right / twipsPerPixel), + Float(border.bottom / twipsPerPixel), + Float(border.left / twipsPerPixel) }; + Rect dirtyRect = NSRectToRect(aDirtyRect, twipsPerPixel); + + uint8_t borderStyles[4]; + nscolor borderColors[4]; + nsBorderColors *compositeColors[4]; + + // pull out styles, colors, composite colors + NS_FOR_CSS_SIDES (i) { + borderStyles[i] = aStyleBorder.GetBorderStyle(i); + borderColors[i] = ourColor->CalcComplexColor(aStyleBorder.mBorderColor[i]); + aStyleBorder.GetCompositeColors(i, &compositeColors[i]); + } + + PrintAsFormatString(" borderStyles: %d %d %d %d\n", borderStyles[0], borderStyles[1], borderStyles[2], borderStyles[3]); + //PrintAsFormatString ("bgRadii: %f %f %f %f\n", bgRadii[0], bgRadii[1], bgRadii[2], bgRadii[3]); + +#if 0 + // this will draw a transparent red backround underneath the border area + ColorPattern color(ToDeviceColor(Color(1.f, 0.f, 0.f, 0.5f))); + aDrawTarget.FillRect(joinedBorderAreaPx, color); +#endif + + nsIDocument* document = nullptr; + nsIContent* content = aForFrame->GetContent(); + if (content) { + document = content->OwnerDoc(); + } + + nsCSSBorderRenderer br(aPresContext, + document, + &aDrawTarget, + dirtyRect, + joinedBorderAreaPx, + borderStyles, + borderWidths, + bgRadii, + borderColors, + compositeColors, + bgColor); + br.DrawBorders(); + + if (needToPopClip) { + aDrawTarget.PopClip(); + } + + PrintAsStringNewline(); + + return result; +} + +static nsRect +GetOutlineInnerRect(nsIFrame* aFrame) +{ + nsRect* savedOutlineInnerRect = + aFrame->Properties().Get(nsIFrame::OutlineInnerRectProperty()); + if (savedOutlineInnerRect) + return *savedOutlineInnerRect; + NS_NOTREACHED("we should have saved a frame property"); + return nsRect(nsPoint(0, 0), aFrame->GetSize()); +} + +void +nsCSSRendering::PaintOutline(nsPresContext* aPresContext, + nsRenderingContext& aRenderingContext, + nsIFrame* aForFrame, + const nsRect& aDirtyRect, + const nsRect& aBorderArea, + nsStyleContext* aStyleContext) +{ + nscoord twipsRadii[8]; + + // Get our style context's color struct. + const nsStyleOutline* ourOutline = aStyleContext->StyleOutline(); + MOZ_ASSERT(ourOutline != NS_STYLE_BORDER_STYLE_NONE, + "shouldn't have created nsDisplayOutline item"); + + uint8_t outlineStyle = ourOutline->mOutlineStyle; + nscoord width = ourOutline->GetOutlineWidth(); + + if (width == 0 && outlineStyle != NS_STYLE_BORDER_STYLE_AUTO) { + // Empty outline + return; + } + + nsIFrame* bgFrame = nsCSSRendering::FindNonTransparentBackgroundFrame + (aForFrame, false); + nsStyleContext* bgContext = bgFrame->StyleContext(); + nscolor bgColor = + bgContext->GetVisitedDependentColor(eCSSProperty_background_color); + + nsRect innerRect; + if ( +#ifdef MOZ_XUL + aStyleContext->GetPseudoType() == CSSPseudoElementType::XULTree +#else + false +#endif + ) { + innerRect = aBorderArea; + } else { + innerRect = GetOutlineInnerRect(aForFrame) + aBorderArea.TopLeft(); + } + nscoord offset = ourOutline->mOutlineOffset; + innerRect.Inflate(offset, offset); + // If the dirty rect is completely inside the border area (e.g., only the + // content is being painted), then we can skip out now + // XXX this isn't exactly true for rounded borders, where the inside curves may + // encroach into the content area. A safer calculation would be to + // shorten insideRect by the radius one each side before performing this test. + if (innerRect.Contains(aDirtyRect)) + return; + + nsRect outerRect = innerRect; + outerRect.Inflate(width, width); + + // get the radius for our outline + nsIFrame::ComputeBorderRadii(ourOutline->mOutlineRadius, aBorderArea.Size(), + outerRect.Size(), Sides(), twipsRadii); + + // Get our conversion values + nscoord twipsPerPixel = aPresContext->DevPixelsToAppUnits(1); + + // get the outer rectangles + Rect oRect(NSRectToRect(outerRect, twipsPerPixel)); + + // convert the radii + nsMargin outlineMargin(width, width, width, width); + RectCornerRadii outlineRadii; + ComputePixelRadii(twipsRadii, twipsPerPixel, &outlineRadii); + + if (outlineStyle == NS_STYLE_BORDER_STYLE_AUTO) { + if (nsLayoutUtils::IsOutlineStyleAutoEnabled()) { + nsITheme* theme = aPresContext->GetTheme(); + if (theme && theme->ThemeSupportsWidget(aPresContext, aForFrame, + NS_THEME_FOCUS_OUTLINE)) { + theme->DrawWidgetBackground(&aRenderingContext, aForFrame, + NS_THEME_FOCUS_OUTLINE, innerRect, + aDirtyRect); + return; + } + } + if (width == 0) { + return; // empty outline + } + // http://dev.w3.org/csswg/css-ui/#outline + // "User agents may treat 'auto' as 'solid'." + outlineStyle = NS_STYLE_BORDER_STYLE_SOLID; + } + + uint8_t outlineStyles[4] = { outlineStyle, outlineStyle, + outlineStyle, outlineStyle }; + + // This handles treating the initial color as 'currentColor'; if we + // ever want 'invert' back we'll need to do a bit of work here too. + nscolor outlineColor = + aStyleContext->GetVisitedDependentColor(eCSSProperty_outline_color); + nscolor outlineColors[4] = { outlineColor, + outlineColor, + outlineColor, + outlineColor }; + + // convert the border widths + Float outlineWidths[4] = { Float(width / twipsPerPixel), + Float(width / twipsPerPixel), + Float(width / twipsPerPixel), + Float(width / twipsPerPixel) }; + Rect dirtyRect = NSRectToRect(aDirtyRect, twipsPerPixel); + + nsIDocument* document = nullptr; + nsIContent* content = aForFrame->GetContent(); + if (content) { + document = content->OwnerDoc(); + } + + // start drawing + + nsCSSBorderRenderer br(aPresContext, + document, + aRenderingContext.GetDrawTarget(), + dirtyRect, + oRect, + outlineStyles, + outlineWidths, + outlineRadii, + outlineColors, + nullptr, + bgColor); + br.DrawBorders(); + + PrintAsStringNewline(); +} + +void +nsCSSRendering::PaintFocus(nsPresContext* aPresContext, + DrawTarget* aDrawTarget, + const nsRect& aFocusRect, + nscolor aColor) +{ + nscoord oneCSSPixel = nsPresContext::CSSPixelsToAppUnits(1); + nscoord oneDevPixel = aPresContext->DevPixelsToAppUnits(1); + + Rect focusRect(NSRectToRect(aFocusRect, oneDevPixel)); + + RectCornerRadii focusRadii; + { + nscoord twipsRadii[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; + ComputePixelRadii(twipsRadii, oneDevPixel, &focusRadii); + } + Float focusWidths[4] = { Float(oneCSSPixel / oneDevPixel), + Float(oneCSSPixel / oneDevPixel), + Float(oneCSSPixel / oneDevPixel), + Float(oneCSSPixel / oneDevPixel) }; + + uint8_t focusStyles[4] = { NS_STYLE_BORDER_STYLE_DOTTED, + NS_STYLE_BORDER_STYLE_DOTTED, + NS_STYLE_BORDER_STYLE_DOTTED, + NS_STYLE_BORDER_STYLE_DOTTED }; + nscolor focusColors[4] = { aColor, aColor, aColor, aColor }; + + // Because this renders a dotted border, the background color + // should not be used. Therefore, we provide a value that will + // be blatantly wrong if it ever does get used. (If this becomes + // something that CSS can style, this function will then have access + // to a style context and can use the same logic that PaintBorder + // and PaintOutline do.) + nsCSSBorderRenderer br(aPresContext, + nullptr, + aDrawTarget, + focusRect, + focusRect, + focusStyles, + focusWidths, + focusRadii, + focusColors, + nullptr, + NS_RGB(255, 0, 0)); + br.DrawBorders(); + + PrintAsStringNewline(); +} + +// Thebes Border Rendering Code End +//---------------------------------------------------------------------- + + +//---------------------------------------------------------------------- + +/** + * Helper for ComputeObjectAnchorPoint; parameters are the same as for + * that function, except they're for a single coordinate / a single size + * dimension. (so, x/width vs. y/height) + */ +static void +ComputeObjectAnchorCoord(const Position::Coord& aCoord, + const nscoord aOriginBounds, + const nscoord aImageSize, + nscoord* aTopLeftCoord, + nscoord* aAnchorPointCoord) +{ + *aAnchorPointCoord = aCoord.mLength; + *aTopLeftCoord = aCoord.mLength; + + if (aCoord.mHasPercent) { + // Adjust aTopLeftCoord by the specified % of the extra space. + nscoord extraSpace = aOriginBounds - aImageSize; + *aTopLeftCoord += NSToCoordRound(aCoord.mPercent * extraSpace); + + // The anchor-point doesn't care about our image's size; just the size + // of the region we're rendering into. + *aAnchorPointCoord += NSToCoordRound(aCoord.mPercent * aOriginBounds); + } +} + +void +nsImageRenderer::ComputeObjectAnchorPoint( + const Position& aPos, + const nsSize& aOriginBounds, + const nsSize& aImageSize, + nsPoint* aTopLeft, + nsPoint* aAnchorPoint) +{ + ComputeObjectAnchorCoord(aPos.mXPosition, + aOriginBounds.width, aImageSize.width, + &aTopLeft->x, &aAnchorPoint->x); + + ComputeObjectAnchorCoord(aPos.mYPosition, + aOriginBounds.height, aImageSize.height, + &aTopLeft->y, &aAnchorPoint->y); +} + +nsIFrame* +nsCSSRendering::FindNonTransparentBackgroundFrame(nsIFrame* aFrame, + bool aStartAtParent /*= false*/) +{ + NS_ASSERTION(aFrame, "Cannot find NonTransparentBackgroundFrame in a null frame"); + + nsIFrame* frame = nullptr; + if (aStartAtParent) { + frame = nsLayoutUtils::GetParentOrPlaceholderFor(aFrame); + } + if (!frame) { + frame = aFrame; + } + + while (frame) { + // No need to call GetVisitedDependentColor because it always uses + // this alpha component anyway. + if (NS_GET_A(frame->StyleBackground()->mBackgroundColor) > 0) + break; + + if (frame->IsThemed()) + break; + + nsIFrame* parent = nsLayoutUtils::GetParentOrPlaceholderFor(frame); + if (!parent) + break; + + frame = parent; + } + return frame; +} + +// Returns true if aFrame is a canvas frame. +// We need to treat the viewport as canvas because, even though +// it does not actually paint a background, we need to get the right +// background style so we correctly detect transparent documents. +bool +nsCSSRendering::IsCanvasFrame(nsIFrame* aFrame) +{ + nsIAtom* frameType = aFrame->GetType(); + return frameType == nsGkAtoms::canvasFrame || + frameType == nsGkAtoms::rootFrame || + frameType == nsGkAtoms::pageContentFrame || + frameType == nsGkAtoms::viewportFrame; +} + +nsIFrame* +nsCSSRendering::FindBackgroundStyleFrame(nsIFrame* aForFrame) +{ + const nsStyleBackground* result = aForFrame->StyleBackground(); + + // Check if we need to do propagation from BODY rather than HTML. + if (!result->IsTransparent()) { + return aForFrame; + } + + nsIContent* content = aForFrame->GetContent(); + // The root element content can't be null. We wouldn't know what + // frame to create for aFrame. + // Use |OwnerDoc| so it works during destruction. + if (!content) { + return aForFrame; + } + + nsIDocument* document = content->OwnerDoc(); + + dom::Element* bodyContent = document->GetBodyElement(); + // We need to null check the body node (bug 118829) since + // there are cases, thanks to the fix for bug 5569, where we + // will reflow a document with no body. In particular, if a + // SCRIPT element in the head blocks the parser and then has a + // SCRIPT that does "document.location.href = 'foo'", then + // nsParser::Terminate will call |DidBuildModel| methods + // through to the content sink, which will call |StartLayout| + // and thus |Initialize| on the pres shell. See bug 119351 + // for the ugly details. + if (!bodyContent) { + return aForFrame; + } + + nsIFrame *bodyFrame = bodyContent->GetPrimaryFrame(); + if (!bodyFrame) { + return aForFrame; + } + + return nsLayoutUtils::GetStyleFrame(bodyFrame); +} + +/** + * |FindBackground| finds the correct style data to use to paint the + * background. It is responsible for handling the following two + * statements in section 14.2 of CSS2: + * + * The background of the box generated by the root element covers the + * entire canvas. + * + * For HTML documents, however, we recommend that authors specify the + * background for the BODY element rather than the HTML element. User + * agents should observe the following precedence rules to fill in the + * background: if the value of the 'background' property for the HTML + * element is different from 'transparent' then use it, else use the + * value of the 'background' property for the BODY element. If the + * resulting value is 'transparent', the rendering is undefined. + * + * Thus, in our implementation, it is responsible for ensuring that: + * + we paint the correct background on the |nsCanvasFrame|, + * |nsRootBoxFrame|, or |nsPageFrame|, + * + we don't paint the background on the root element, and + * + we don't paint the background on the BODY element in *some* cases, + * and for SGML-based HTML documents only. + * + * |FindBackground| returns true if a background should be painted, and + * the resulting style context to use for the background information + * will be filled in to |aBackground|. + */ +nsStyleContext* +nsCSSRendering::FindRootFrameBackground(nsIFrame* aForFrame) +{ + return FindBackgroundStyleFrame(aForFrame)->StyleContext(); +} + +inline bool +FindElementBackground(nsIFrame* aForFrame, nsIFrame* aRootElementFrame, + nsStyleContext** aBackgroundSC) +{ + if (aForFrame == aRootElementFrame) { + // We must have propagated our background to the viewport or canvas. Abort. + return false; + } + + *aBackgroundSC = aForFrame->StyleContext(); + + // Return true unless the frame is for a BODY element whose background + // was propagated to the viewport. + + nsIContent* content = aForFrame->GetContent(); + if (!content || content->NodeInfo()->NameAtom() != nsGkAtoms::body) + return true; // not frame for a "body" element + // It could be a non-HTML "body" element but that's OK, we'd fail the + // bodyContent check below + + if (aForFrame->StyleContext()->GetPseudo()) + return true; // A pseudo-element frame. + + // We should only look at the background if we're in an HTML document + nsIDocument* document = content->OwnerDoc(); + + dom::Element* bodyContent = document->GetBodyElement(); + if (bodyContent != content) + return true; // this wasn't the background that was propagated + + // This can be called even when there's no root element yet, during frame + // construction, via nsLayoutUtils::FrameHasTransparency and + // nsContainerFrame::SyncFrameViewProperties. + if (!aRootElementFrame) + return true; + + const nsStyleBackground* htmlBG = aRootElementFrame->StyleBackground(); + return !htmlBG->IsTransparent(); +} + +bool +nsCSSRendering::FindBackground(nsIFrame* aForFrame, + nsStyleContext** aBackgroundSC) +{ + nsIFrame* rootElementFrame = + aForFrame->PresContext()->PresShell()->FrameConstructor()->GetRootElementStyleFrame(); + if (IsCanvasFrame(aForFrame)) { + *aBackgroundSC = FindCanvasBackground(aForFrame, rootElementFrame); + return true; + } else { + return FindElementBackground(aForFrame, rootElementFrame, aBackgroundSC); + } +} + +void +nsCSSRendering::BeginFrameTreesLocked() +{ + ++gFrameTreeLockCount; +} + +void +nsCSSRendering::EndFrameTreesLocked() +{ + NS_ASSERTION(gFrameTreeLockCount > 0, "Unbalanced EndFrameTreeLocked"); + --gFrameTreeLockCount; + if (gFrameTreeLockCount == 0) { + gInlineBGData->Reset(); + } +} + +void +nsCSSRendering::PaintBoxShadowOuter(nsPresContext* aPresContext, + nsRenderingContext& aRenderingContext, + nsIFrame* aForFrame, + const nsRect& aFrameArea, + const nsRect& aDirtyRect, + float aOpacity) +{ + DrawTarget& aDrawTarget = *aRenderingContext.GetDrawTarget(); + nsCSSShadowArray* shadows = aForFrame->StyleEffects()->mBoxShadow; + if (!shadows) + return; + + bool hasBorderRadius; + bool nativeTheme; // mutually exclusive with hasBorderRadius + const nsStyleDisplay* styleDisplay = aForFrame->StyleDisplay(); + nsITheme::Transparency transparency; + if (aForFrame->IsThemed(styleDisplay, &transparency)) { + // We don't respect border-radius for native-themed widgets + hasBorderRadius = false; + // For opaque (rectangular) theme widgets we can take the generic + // border-box path with border-radius disabled. + nativeTheme = transparency != nsITheme::eOpaque; + } else { + nativeTheme = false; + hasBorderRadius = true; // we'll update this below + } + + nsRect frameRect = nativeTheme ? + aForFrame->GetVisualOverflowRectRelativeToSelf() + aFrameArea.TopLeft() : + aFrameArea; + Sides skipSides = aForFrame->GetSkipSides(); + frameRect = ::BoxDecorationRectForBorder(aForFrame, frameRect, skipSides); + + // Get any border radius, since box-shadow must also have rounded corners if + // the frame does. + RectCornerRadii borderRadii; + const nscoord twipsPerPixel = aPresContext->DevPixelsToAppUnits(1); + if (hasBorderRadius) { + nscoord twipsRadii[8]; + NS_ASSERTION(aFrameArea.Size() == aForFrame->VisualBorderRectRelativeToSelf().Size(), + "unexpected size"); + nsSize sz = frameRect.Size(); + hasBorderRadius = aForFrame->GetBorderRadii(sz, sz, Sides(), twipsRadii); + if (hasBorderRadius) { + ComputePixelRadii(twipsRadii, twipsPerPixel, &borderRadii); + } + } + + + // We don't show anything that intersects with the frame we're blurring on. So tell the + // blurrer not to do unnecessary work there. + gfxRect skipGfxRect = ThebesRect(NSRectToRect(frameRect, twipsPerPixel)); + skipGfxRect.Round(); + bool useSkipGfxRect = true; + if (nativeTheme) { + // Optimize non-leaf native-themed frames by skipping computing pixels + // in the padding-box. We assume the padding-box is going to be painted + // opaquely for non-leaf frames. + // XXX this may not be a safe assumption; we should make this go away + // by optimizing box-shadow drawing more for the cases where we don't have a skip-rect. + useSkipGfxRect = !aForFrame->IsLeaf(); + nsRect paddingRect = + aForFrame->GetPaddingRect() - aForFrame->GetPosition() + aFrameArea.TopLeft(); + skipGfxRect = nsLayoutUtils::RectToGfxRect(paddingRect, twipsPerPixel); + } else if (hasBorderRadius) { + skipGfxRect.Deflate(gfxMargin( + std::max(borderRadii[C_TL].height, borderRadii[C_TR].height), 0, + std::max(borderRadii[C_BL].height, borderRadii[C_BR].height), 0)); + } + + gfxContext* renderContext = aRenderingContext.ThebesContext(); + + for (uint32_t i = shadows->Length(); i > 0; --i) { + nsCSSShadowItem* shadowItem = shadows->ShadowAt(i - 1); + if (shadowItem->mInset) + continue; + + nsRect shadowRect = frameRect; + shadowRect.MoveBy(shadowItem->mXOffset, shadowItem->mYOffset); + if (!nativeTheme) { + shadowRect.Inflate(shadowItem->mSpread, shadowItem->mSpread); + } + + // shadowRect won't include the blur, so make an extra rect here that includes the blur + // for use in the even-odd rule below. + nsRect shadowRectPlusBlur = shadowRect; + nscoord blurRadius = shadowItem->mRadius; + shadowRectPlusBlur.Inflate( + nsContextBoxBlur::GetBlurRadiusMargin(blurRadius, twipsPerPixel)); + + Rect shadowGfxRectPlusBlur = + NSRectToRect(shadowRectPlusBlur, twipsPerPixel); + shadowGfxRectPlusBlur.RoundOut(); + MaybeSnapToDevicePixels(shadowGfxRectPlusBlur, aDrawTarget, true); + + // Set the shadow color; if not specified, use the foreground color + nscolor shadowColor; + if (shadowItem->mHasColor) + shadowColor = shadowItem->mColor; + else + shadowColor = aForFrame->StyleColor()->mColor; + + Color gfxShadowColor(Color::FromABGR(shadowColor)); + gfxShadowColor.a *= aOpacity; + + if (nativeTheme) { + nsContextBoxBlur blurringArea; + + // When getting the widget shape from the native theme, we're going + // to draw the widget into the shadow surface to create a mask. + // We need to ensure that there actually *is* a shadow surface + // and that we're not going to draw directly into renderContext. + gfxContext* shadowContext = + blurringArea.Init(shadowRect, shadowItem->mSpread, + blurRadius, twipsPerPixel, renderContext, aDirtyRect, + useSkipGfxRect ? &skipGfxRect : nullptr, + nsContextBoxBlur::FORCE_MASK); + if (!shadowContext) + continue; + + MOZ_ASSERT(shadowContext == blurringArea.GetContext()); + + renderContext->Save(); + renderContext->SetColor(gfxShadowColor); + + // Draw the shape of the frame so it can be blurred. Recall how nsContextBoxBlur + // doesn't make any temporary surfaces if blur is 0 and it just returns the original + // surface? If we have no blur, we're painting this fill on the actual content surface + // (renderContext == shadowContext) which is why we set up the color and clip + // before doing this. + + // We don't clip the border-box from the shadow, nor any other box. + // We assume that the native theme is going to paint over the shadow. + + // Draw the widget shape + gfxContextMatrixAutoSaveRestore save(shadowContext); + gfxPoint devPixelOffset = + nsLayoutUtils::PointToGfxPoint(nsPoint(shadowItem->mXOffset, + shadowItem->mYOffset), + aPresContext->AppUnitsPerDevPixel()); + shadowContext->SetMatrix( + shadowContext->CurrentMatrix().Translate(devPixelOffset)); + + nsRect nativeRect = aDirtyRect; + nativeRect.MoveBy(-nsPoint(shadowItem->mXOffset, shadowItem->mYOffset)); + nativeRect.IntersectRect(frameRect, nativeRect); + nsRenderingContext wrapperCtx(shadowContext); + aPresContext->GetTheme()->DrawWidgetBackground(&wrapperCtx, aForFrame, + styleDisplay->mAppearance, aFrameArea, nativeRect); + + blurringArea.DoPaint(); + renderContext->Restore(); + } else { + renderContext->Save(); + + { + Rect innerClipRect = NSRectToRect(frameRect, twipsPerPixel); + if (!MaybeSnapToDevicePixels(innerClipRect, aDrawTarget, true)) { + innerClipRect.Round(); + } + + // Clip out the interior of the frame's border edge so that the shadow + // is only painted outside that area. + RefPtr builder = + aDrawTarget.CreatePathBuilder(FillRule::FILL_EVEN_ODD); + AppendRectToPath(builder, shadowGfxRectPlusBlur); + if (hasBorderRadius) { + AppendRoundedRectToPath(builder, innerClipRect, borderRadii); + } else { + AppendRectToPath(builder, innerClipRect); + } + RefPtr path = builder->Finish(); + renderContext->Clip(path); + } + + // Clip the shadow so that we only get the part that applies to aForFrame. + nsRect fragmentClip = shadowRectPlusBlur; + if (!skipSides.IsEmpty()) { + if (skipSides.Left()) { + nscoord xmost = fragmentClip.XMost(); + fragmentClip.x = aFrameArea.x; + fragmentClip.width = xmost - fragmentClip.x; + } + if (skipSides.Right()) { + nscoord xmost = fragmentClip.XMost(); + nscoord overflow = xmost - aFrameArea.XMost(); + if (overflow > 0) { + fragmentClip.width -= overflow; + } + } + if (skipSides.Top()) { + nscoord ymost = fragmentClip.YMost(); + fragmentClip.y = aFrameArea.y; + fragmentClip.height = ymost - fragmentClip.y; + } + if (skipSides.Bottom()) { + nscoord ymost = fragmentClip.YMost(); + nscoord overflow = ymost - aFrameArea.YMost(); + if (overflow > 0) { + fragmentClip.height -= overflow; + } + } + } + fragmentClip = fragmentClip.Intersect(aDirtyRect); + renderContext-> + Clip(NSRectToSnappedRect(fragmentClip, + aForFrame->PresContext()->AppUnitsPerDevPixel(), + aDrawTarget)); + + RectCornerRadii clipRectRadii; + if (hasBorderRadius) { + Float spreadDistance = shadowItem->mSpread / twipsPerPixel; + + Float borderSizes[4]; + + borderSizes[NS_SIDE_LEFT] = spreadDistance; + borderSizes[NS_SIDE_TOP] = spreadDistance; + borderSizes[NS_SIDE_RIGHT] = spreadDistance; + borderSizes[NS_SIDE_BOTTOM] = spreadDistance; + + nsCSSBorderRenderer::ComputeOuterRadii(borderRadii, borderSizes, + &clipRectRadii); + + } + nsContextBoxBlur::BlurRectangle(renderContext, + shadowRect, + twipsPerPixel, + hasBorderRadius ? &clipRectRadii : nullptr, + blurRadius, + gfxShadowColor, + aDirtyRect, + skipGfxRect); + renderContext->Restore(); + } + + } +} + +void +nsCSSRendering::PaintBoxShadowInner(nsPresContext* aPresContext, + nsRenderingContext& aRenderingContext, + nsIFrame* aForFrame, + const nsRect& aFrameArea) +{ + nsCSSShadowArray* shadows = aForFrame->StyleEffects()->mBoxShadow; + if (!shadows) + return; + if (aForFrame->IsThemed() && aForFrame->GetContent() && + !nsContentUtils::IsChromeDoc(aForFrame->GetContent()->GetUncomposedDoc())) { + // There's no way of getting hold of a shape corresponding to a + // "padding-box" for native-themed widgets, so just don't draw + // inner box-shadows for them. But we allow chrome to paint inner + // box shadows since chrome can be aware of the platform theme. + return; + } + + NS_ASSERTION(aForFrame->GetType() == nsGkAtoms::fieldSetFrame || + aFrameArea.Size() == aForFrame->GetSize(), "unexpected size"); + + Sides skipSides = aForFrame->GetSkipSides(); + nsRect frameRect = + ::BoxDecorationRectForBorder(aForFrame, aFrameArea, skipSides); + nsRect paddingRect = frameRect; + nsMargin border = aForFrame->GetUsedBorder(); + paddingRect.Deflate(border); + + // Get any border radius, since box-shadow must also have rounded corners + // if the frame does. + nscoord twipsRadii[8]; + nsSize sz = frameRect.Size(); + bool hasBorderRadius = aForFrame->GetBorderRadii(sz, sz, Sides(), twipsRadii); + const nscoord twipsPerPixel = aPresContext->DevPixelsToAppUnits(1); + + RectCornerRadii innerRadii; + if (hasBorderRadius) { + RectCornerRadii borderRadii; + + ComputePixelRadii(twipsRadii, twipsPerPixel, &borderRadii); + Float borderSizes[4] = { + Float(border.top / twipsPerPixel), + Float(border.right / twipsPerPixel), + Float(border.bottom / twipsPerPixel), + Float(border.left / twipsPerPixel) + }; + nsCSSBorderRenderer::ComputeInnerRadii(borderRadii, borderSizes, + &innerRadii); + } + + for (uint32_t i = shadows->Length(); i > 0; --i) { + nsCSSShadowItem* shadowItem = shadows->ShadowAt(i - 1); + if (!shadowItem->mInset) + continue; + + // shadowPaintRect: the area to paint on the temp surface + // shadowClipRect: the area on the temporary surface within shadowPaintRect + // that we will NOT paint in + nscoord blurRadius = shadowItem->mRadius; + nsMargin blurMargin = + nsContextBoxBlur::GetBlurRadiusMargin(blurRadius, twipsPerPixel); + nsRect shadowPaintRect = paddingRect; + shadowPaintRect.Inflate(blurMargin); + + Rect shadowPaintGfxRect = NSRectToRect(shadowPaintRect, twipsPerPixel); + shadowPaintGfxRect.RoundOut(); + + // Round the spread radius to device pixels (by truncation). + // This mostly matches what we do for borders, except that we don't round + // up values between zero and one device pixels to one device pixel. + // This way of rounding is symmetric around zero, which makes sense for + // the spread radius. + int32_t spreadDistance = shadowItem->mSpread / twipsPerPixel; + nscoord spreadDistanceAppUnits = aPresContext->DevPixelsToAppUnits(spreadDistance); + + nsRect shadowClipRect = paddingRect; + shadowClipRect.MoveBy(shadowItem->mXOffset, shadowItem->mYOffset); + shadowClipRect.Deflate(spreadDistanceAppUnits, spreadDistanceAppUnits); + + Rect shadowClipGfxRect = NSRectToRect(shadowClipRect, twipsPerPixel); + shadowClipGfxRect.Round(); + + RectCornerRadii clipRectRadii; + if (hasBorderRadius) { + // Calculate the radii the inner clipping rect will have + Float borderSizes[4] = {0, 0, 0, 0}; + + // See PaintBoxShadowOuter and bug 514670 + if (innerRadii[C_TL].width > 0 || innerRadii[C_BL].width > 0) { + borderSizes[NS_SIDE_LEFT] = spreadDistance; + } + + if (innerRadii[C_TL].height > 0 || innerRadii[C_TR].height > 0) { + borderSizes[NS_SIDE_TOP] = spreadDistance; + } + + if (innerRadii[C_TR].width > 0 || innerRadii[C_BR].width > 0) { + borderSizes[NS_SIDE_RIGHT] = spreadDistance; + } + + if (innerRadii[C_BL].height > 0 || innerRadii[C_BR].height > 0) { + borderSizes[NS_SIDE_BOTTOM] = spreadDistance; + } + + nsCSSBorderRenderer::ComputeInnerRadii(innerRadii, borderSizes, + &clipRectRadii); + } + + // Set the "skip rect" to the area within the frame that we don't paint in, + // including after blurring. + nsRect skipRect = shadowClipRect; + skipRect.Deflate(blurMargin); + gfxRect skipGfxRect = nsLayoutUtils::RectToGfxRect(skipRect, twipsPerPixel); + if (hasBorderRadius) { + skipGfxRect.Deflate(gfxMargin( + std::max(clipRectRadii[C_TL].height, clipRectRadii[C_TR].height), 0, + std::max(clipRectRadii[C_BL].height, clipRectRadii[C_BR].height), 0)); + } + + // When there's a blur radius, gfxAlphaBoxBlur leaves the skiprect area + // unchanged. And by construction the gfxSkipRect is not touched by the + // rendered shadow (even after blurring), so those pixels must be completely + // transparent in the shadow, so drawing them changes nothing. + gfxContext* renderContext = aRenderingContext.ThebesContext(); + DrawTarget* drawTarget = renderContext->GetDrawTarget(); + nsContextBoxBlur blurringArea; + + // Clip the context to the area of the frame's padding rect, so no part of the + // shadow is painted outside. Also cut out anything beyond where the inset shadow + // will be. + Rect shadowGfxRect = NSRectToRect(paddingRect, twipsPerPixel); + shadowGfxRect.Round(); + + // Set the shadow color; if not specified, use the foreground color + Color shadowColor = Color::FromABGR(shadowItem->mHasColor ? + shadowItem->mColor : + aForFrame->StyleColor()->mColor); + + renderContext->Save(); + + // This clips the outside border radius. + // clipRectRadii is the border radius inside the inset shadow. + if (hasBorderRadius) { + RefPtr roundedRect = + MakePathForRoundedRect(*drawTarget, shadowGfxRect, innerRadii); + renderContext->Clip(roundedRect); + } else { + renderContext->Clip(shadowGfxRect); + } + + nsContextBoxBlur insetBoxBlur; + gfxRect destRect = nsLayoutUtils::RectToGfxRect(shadowPaintRect, twipsPerPixel); + Point shadowOffset(shadowItem->mXOffset / twipsPerPixel, + shadowItem->mYOffset / twipsPerPixel); + + insetBoxBlur.InsetBoxBlur(renderContext, ToRect(destRect), + shadowClipGfxRect, shadowColor, + blurRadius, spreadDistanceAppUnits, + twipsPerPixel, hasBorderRadius, + clipRectRadii, ToRect(skipGfxRect), + shadowOffset); + renderContext->Restore(); + } +} + +/* static */ +nsCSSRendering::PaintBGParams +nsCSSRendering::PaintBGParams::ForAllLayers(nsPresContext& aPresCtx, + nsRenderingContext& aRenderingCtx, + const nsRect& aDirtyRect, + const nsRect& aBorderArea, + nsIFrame *aFrame, + uint32_t aPaintFlags) +{ + MOZ_ASSERT(aFrame); + + PaintBGParams result(aPresCtx, aRenderingCtx, aDirtyRect, aBorderArea, aFrame, + aPaintFlags, -1, CompositionOp::OP_OVER); + + return result; +} + +/* static */ +nsCSSRendering::PaintBGParams +nsCSSRendering::PaintBGParams::ForSingleLayer(nsPresContext& aPresCtx, + nsRenderingContext& aRenderingCtx, + const nsRect& aDirtyRect, + const nsRect& aBorderArea, + nsIFrame *aFrame, + uint32_t aPaintFlags, + int32_t aLayer, + CompositionOp aCompositionOp) +{ + MOZ_ASSERT(aFrame && (aLayer != -1)); + + PaintBGParams result(aPresCtx, aRenderingCtx, aDirtyRect, aBorderArea, aFrame, + aPaintFlags, aLayer, aCompositionOp); + + return result; +} + +DrawResult +nsCSSRendering::PaintBackground(const PaintBGParams& aParams) +{ + PROFILER_LABEL("nsCSSRendering", "PaintBackground", + js::ProfileEntry::Category::GRAPHICS); + + NS_PRECONDITION(aParams.frame, + "Frame is expected to be provided to PaintBackground"); + + nsStyleContext *sc; + if (!FindBackground(aParams.frame, &sc)) { + // We don't want to bail out if moz-appearance is set on a root + // node. If it has a parent content node, bail because it's not + // a root, otherwise keep going in order to let the theme stuff + // draw the background. The canvas really should be drawing the + // bg, but there's no way to hook that up via css. + if (!aParams.frame->StyleDisplay()->mAppearance) { + return DrawResult::SUCCESS; + } + + nsIContent* content = aParams.frame->GetContent(); + if (!content || content->GetParent()) { + return DrawResult::SUCCESS; + } + + sc = aParams.frame->StyleContext(); + } + + return PaintBackgroundWithSC(aParams, sc, *aParams.frame->StyleBorder()); +} + +static bool +IsOpaqueBorderEdge(const nsStyleBorder& aBorder, mozilla::css::Side aSide) +{ + if (aBorder.GetComputedBorder().Side(aSide) == 0) + return true; + switch (aBorder.GetBorderStyle(aSide)) { + case NS_STYLE_BORDER_STYLE_SOLID: + case NS_STYLE_BORDER_STYLE_GROOVE: + case NS_STYLE_BORDER_STYLE_RIDGE: + case NS_STYLE_BORDER_STYLE_INSET: + case NS_STYLE_BORDER_STYLE_OUTSET: + break; + default: + return false; + } + + // If we're using a border image, assume it's not fully opaque, + // because we may not even have the image loaded at this point, and + // even if we did, checking whether the relevant tile is fully + // opaque would be too much work. + if (aBorder.mBorderImageSource.GetType() != eStyleImageType_Null) + return false; + + StyleComplexColor color = aBorder.mBorderColor[aSide]; + // We don't know the foreground color here, so if it's being used + // we must assume it might be transparent. + if (!color.IsNumericColor()) { + return false; + } + return NS_GET_A(color.mColor) == 255; +} + +/** + * Returns true if all border edges are either missing or opaque. + */ +static bool +IsOpaqueBorder(const nsStyleBorder& aBorder) +{ + if (aBorder.mBorderColors) + return false; + NS_FOR_CSS_SIDES(i) { + if (!IsOpaqueBorderEdge(aBorder, i)) + return false; + } + return true; +} + +static inline void +SetupDirtyRects(const nsRect& aBGClipArea, const nsRect& aCallerDirtyRect, + nscoord aAppUnitsPerPixel, + /* OUT: */ + nsRect* aDirtyRect, gfxRect* aDirtyRectGfx) +{ + aDirtyRect->IntersectRect(aBGClipArea, aCallerDirtyRect); + + // Compute the Thebes equivalent of the dirtyRect. + *aDirtyRectGfx = nsLayoutUtils::RectToGfxRect(*aDirtyRect, aAppUnitsPerPixel); + NS_WARNING_ASSERTION(aDirtyRect->IsEmpty() || !aDirtyRectGfx->IsEmpty(), + "converted dirty rect should not be empty"); + MOZ_ASSERT(!aDirtyRect->IsEmpty() || aDirtyRectGfx->IsEmpty(), + "second should be empty if first is"); +} + +/* static */ void +nsCSSRendering::GetImageLayerClip(const nsStyleImageLayers::Layer& aLayer, + nsIFrame* aForFrame, const nsStyleBorder& aBorder, + const nsRect& aBorderArea, const nsRect& aCallerDirtyRect, + bool aWillPaintBorder, nscoord aAppUnitsPerPixel, + /* out */ ImageLayerClipState* aClipState) +{ + // Compute the outermost boundary of the area that might be painted. + // Same coordinate space as aBorderArea. + Sides skipSides = aForFrame->GetSkipSides(); + nsRect clipBorderArea = + ::BoxDecorationRectForBorder(aForFrame, aBorderArea, skipSides, &aBorder); + + bool haveRoundedCorners = GetRadii(aForFrame, aBorder, aBorderArea, + clipBorderArea, aClipState->mRadii); + + uint8_t backgroundClip = aLayer.mClip; + + bool isSolidBorder = + aWillPaintBorder && IsOpaqueBorder(aBorder); + if (isSolidBorder && backgroundClip == NS_STYLE_IMAGELAYER_CLIP_BORDER) { + // If we have rounded corners, we need to inflate the background + // drawing area a bit to avoid seams between the border and + // background. + backgroundClip = haveRoundedCorners ? + NS_STYLE_IMAGELAYER_CLIP_MOZ_ALMOST_PADDING : NS_STYLE_IMAGELAYER_CLIP_PADDING; + } + + aClipState->mBGClipArea = clipBorderArea; + aClipState->mHasAdditionalBGClipArea = false; + aClipState->mCustomClip = false; + + if (aForFrame->GetType() == nsGkAtoms::scrollFrame && + NS_STYLE_IMAGELAYER_ATTACHMENT_LOCAL == aLayer.mAttachment) { + // As of this writing, this is still in discussion in the CSS Working Group + // http://lists.w3.org/Archives/Public/www-style/2013Jul/0250.html + + // The rectangle for 'background-clip' scrolls with the content, + // but the background is also clipped at a non-scrolling 'padding-box' + // like the content. (See below.) + // Therefore, only 'content-box' makes a difference here. + if (backgroundClip == NS_STYLE_IMAGELAYER_CLIP_CONTENT) { + nsIScrollableFrame* scrollableFrame = do_QueryFrame(aForFrame); + // Clip at a rectangle attached to the scrolled content. + aClipState->mHasAdditionalBGClipArea = true; + aClipState->mAdditionalBGClipArea = nsRect( + aClipState->mBGClipArea.TopLeft() + + scrollableFrame->GetScrolledFrame()->GetPosition() + // For the dir=rtl case: + + scrollableFrame->GetScrollRange().TopLeft(), + scrollableFrame->GetScrolledRect().Size()); + nsMargin padding = aForFrame->GetUsedPadding(); + // padding-bottom is ignored on scrollable frames: + // https://bugzilla.mozilla.org/show_bug.cgi?id=748518 + padding.bottom = 0; + padding.ApplySkipSides(skipSides); + aClipState->mAdditionalBGClipArea.Deflate(padding); + } + + // Also clip at a non-scrolling, rounded-corner 'padding-box', + // same as the scrolled content because of the 'overflow' property. + backgroundClip = NS_STYLE_IMAGELAYER_CLIP_PADDING; + } + + if (backgroundClip != NS_STYLE_IMAGELAYER_CLIP_BORDER && + backgroundClip != NS_STYLE_IMAGELAYER_CLIP_TEXT) { + nsMargin border = aForFrame->GetUsedBorder(); + if (backgroundClip == NS_STYLE_IMAGELAYER_CLIP_MOZ_ALMOST_PADDING) { + // Reduce |border| by 1px (device pixels) on all sides, if + // possible, so that we don't get antialiasing seams between the + // background and border. + border.top = std::max(0, border.top - aAppUnitsPerPixel); + border.right = std::max(0, border.right - aAppUnitsPerPixel); + border.bottom = std::max(0, border.bottom - aAppUnitsPerPixel); + border.left = std::max(0, border.left - aAppUnitsPerPixel); + } else if (backgroundClip != NS_STYLE_IMAGELAYER_CLIP_PADDING) { + NS_ASSERTION(backgroundClip == NS_STYLE_IMAGELAYER_CLIP_CONTENT, + "unexpected background-clip"); + border += aForFrame->GetUsedPadding(); + } + border.ApplySkipSides(skipSides); + aClipState->mBGClipArea.Deflate(border); + + if (haveRoundedCorners) { + nsIFrame::InsetBorderRadii(aClipState->mRadii, border); + } + } + + if (haveRoundedCorners) { + auto d2a = aForFrame->PresContext()->AppUnitsPerDevPixel(); + nsCSSRendering::ComputePixelRadii(aClipState->mRadii, d2a, &aClipState->mClippedRadii); + aClipState->mHasRoundedCorners = true; + } else { + aClipState->mHasRoundedCorners = false; + } + + + if (!haveRoundedCorners && aClipState->mHasAdditionalBGClipArea) { + // Do the intersection here to account for the fast path(?) below. + aClipState->mBGClipArea = + aClipState->mBGClipArea.Intersect(aClipState->mAdditionalBGClipArea); + aClipState->mHasAdditionalBGClipArea = false; + } + + SetupDirtyRects(aClipState->mBGClipArea, aCallerDirtyRect, aAppUnitsPerPixel, + &aClipState->mDirtyRect, &aClipState->mDirtyRectGfx); +} + +static void +SetupImageLayerClip(nsCSSRendering::ImageLayerClipState& aClipState, + gfxContext *aCtx, nscoord aAppUnitsPerPixel, + gfxContextAutoSaveRestore* aAutoSR) +{ + if (aClipState.mDirtyRectGfx.IsEmpty()) { + // Our caller won't draw anything under this condition, so no need + // to set more up. + return; + } + + if (aClipState.mCustomClip) { + // We don't support custom clips and rounded corners, arguably a bug, but + // table painting seems to depend on it. + return; + } + + DrawTarget* drawTarget = aCtx->GetDrawTarget(); + + // If we have rounded corners, clip all subsequent drawing to the + // rounded rectangle defined by bgArea and bgRadii (we don't know + // whether the rounded corners intrude on the dirtyRect or not). + // Do not do this if we have a caller-provided clip rect -- + // as above with bgArea, arguably a bug, but table painting seems + // to depend on it. + + if (aClipState.mHasAdditionalBGClipArea) { + gfxRect bgAreaGfx = nsLayoutUtils::RectToGfxRect( + aClipState.mAdditionalBGClipArea, aAppUnitsPerPixel); + bgAreaGfx.Round(); + bgAreaGfx.Condition(); + + aAutoSR->EnsureSaved(aCtx); + aCtx->NewPath(); + aCtx->Rectangle(bgAreaGfx, true); + aCtx->Clip(); + } + + if (aClipState.mHasRoundedCorners) { + Rect bgAreaGfx = NSRectToRect(aClipState.mBGClipArea, aAppUnitsPerPixel); + bgAreaGfx.Round(); + + if (bgAreaGfx.IsEmpty()) { + // I think it's become possible to hit this since + // http://hg.mozilla.org/mozilla-central/rev/50e934e4979b landed. + NS_WARNING("converted background area should not be empty"); + // Make our caller not do anything. + aClipState.mDirtyRectGfx.SizeTo(gfxSize(0.0, 0.0)); + return; + } + + aAutoSR->EnsureSaved(aCtx); + + RefPtr roundedRect = + MakePathForRoundedRect(*drawTarget, bgAreaGfx, aClipState.mClippedRadii); + aCtx->Clip(roundedRect); + } +} + +static void +DrawBackgroundColor(nsCSSRendering::ImageLayerClipState& aClipState, + gfxContext *aCtx, nscoord aAppUnitsPerPixel) +{ + if (aClipState.mDirtyRectGfx.IsEmpty()) { + // Our caller won't draw anything under this condition, so no need + // to set more up. + return; + } + + DrawTarget* drawTarget = aCtx->GetDrawTarget(); + + // We don't support custom clips and rounded corners, arguably a bug, but + // table painting seems to depend on it. + if (!aClipState.mHasRoundedCorners || aClipState.mCustomClip) { + aCtx->NewPath(); + aCtx->Rectangle(aClipState.mDirtyRectGfx, true); + aCtx->Fill(); + return; + } + + Rect bgAreaGfx = NSRectToRect(aClipState.mBGClipArea, aAppUnitsPerPixel); + bgAreaGfx.Round(); + + if (bgAreaGfx.IsEmpty()) { + // I think it's become possible to hit this since + // http://hg.mozilla.org/mozilla-central/rev/50e934e4979b landed. + NS_WARNING("converted background area should not be empty"); + // Make our caller not do anything. + aClipState.mDirtyRectGfx.SizeTo(gfxSize(0.0, 0.0)); + return; + } + + aCtx->Save(); + gfxRect dirty = ThebesRect(bgAreaGfx).Intersect(aClipState.mDirtyRectGfx); + + aCtx->NewPath(); + aCtx->Rectangle(dirty, true); + aCtx->Clip(); + + if (aClipState.mHasAdditionalBGClipArea) { + gfxRect bgAdditionalAreaGfx = nsLayoutUtils::RectToGfxRect( + aClipState.mAdditionalBGClipArea, aAppUnitsPerPixel); + bgAdditionalAreaGfx.Round(); + bgAdditionalAreaGfx.Condition(); + aCtx->NewPath(); + aCtx->Rectangle(bgAdditionalAreaGfx, true); + aCtx->Clip(); + } + + RefPtr roundedRect = + MakePathForRoundedRect(*drawTarget, bgAreaGfx, aClipState.mClippedRadii); + aCtx->SetPath(roundedRect); + aCtx->Fill(); + aCtx->Restore(); +} + +nscolor +nsCSSRendering::DetermineBackgroundColor(nsPresContext* aPresContext, + nsStyleContext* aStyleContext, + nsIFrame* aFrame, + bool& aDrawBackgroundImage, + bool& aDrawBackgroundColor) +{ + aDrawBackgroundImage = true; + aDrawBackgroundColor = true; + + const nsStyleVisibility* visibility = aStyleContext->StyleVisibility(); + + if (visibility->mColorAdjust != NS_STYLE_COLOR_ADJUST_EXACT && + aFrame->HonorPrintBackgroundSettings()) { + aDrawBackgroundImage = aPresContext->GetBackgroundImageDraw(); + aDrawBackgroundColor = aPresContext->GetBackgroundColorDraw(); + } + + const nsStyleBackground *bg = aStyleContext->StyleBackground(); + nscolor bgColor; + if (aDrawBackgroundColor) { + bgColor = + aStyleContext->GetVisitedDependentColor(eCSSProperty_background_color); + if (NS_GET_A(bgColor) == 0) { + aDrawBackgroundColor = false; + } + } else { + // If GetBackgroundColorDraw() is false, we are still expected to + // draw color in the background of any frame that's not completely + // transparent, but we are expected to use white instead of whatever + // color was specified. + bgColor = NS_RGB(255, 255, 255); + if (aDrawBackgroundImage || !bg->IsTransparent()) { + aDrawBackgroundColor = true; + } else { + bgColor = NS_RGBA(0,0,0,0); + } + } + + // We can skip painting the background color if a background image is opaque. + nsStyleImageLayers::Repeat repeat = bg->BottomLayer().mRepeat; + bool xFullRepeat = repeat.mXRepeat == NS_STYLE_IMAGELAYER_REPEAT_REPEAT || + repeat.mXRepeat == NS_STYLE_IMAGELAYER_REPEAT_ROUND; + bool yFullRepeat = repeat.mYRepeat == NS_STYLE_IMAGELAYER_REPEAT_REPEAT || + repeat.mYRepeat == NS_STYLE_IMAGELAYER_REPEAT_ROUND; + if (aDrawBackgroundColor && + xFullRepeat && yFullRepeat && + bg->BottomLayer().mImage.IsOpaque() && + bg->BottomLayer().mBlendMode == NS_STYLE_BLEND_NORMAL) { + aDrawBackgroundColor = false; + } + + return bgColor; +} + +static gfxFloat +ConvertGradientValueToPixels(const nsStyleCoord& aCoord, + gfxFloat aFillLength, + int32_t aAppUnitsPerPixel) +{ + switch (aCoord.GetUnit()) { + case eStyleUnit_Percent: + return aCoord.GetPercentValue() * aFillLength; + case eStyleUnit_Coord: + return NSAppUnitsToFloatPixels(aCoord.GetCoordValue(), aAppUnitsPerPixel); + case eStyleUnit_Calc: { + const nsStyleCoord::Calc *calc = aCoord.GetCalcValue(); + return calc->mPercent * aFillLength + + NSAppUnitsToFloatPixels(calc->mLength, aAppUnitsPerPixel); + } + default: + NS_WARNING("Unexpected coord unit"); + return 0; + } +} + +// Given a box with size aBoxSize and origin (0,0), and an angle aAngle, +// and a starting point for the gradient line aStart, find the endpoint of +// the gradient line --- the intersection of the gradient line with a line +// perpendicular to aAngle that passes through the farthest corner in the +// direction aAngle. +static gfxPoint +ComputeGradientLineEndFromAngle(const gfxPoint& aStart, + double aAngle, + const gfxSize& aBoxSize) +{ + double dx = cos(-aAngle); + double dy = sin(-aAngle); + gfxPoint farthestCorner(dx > 0 ? aBoxSize.width : 0, + dy > 0 ? aBoxSize.height : 0); + gfxPoint delta = farthestCorner - aStart; + double u = delta.x*dy - delta.y*dx; + return farthestCorner + gfxPoint(-u*dy, u*dx); +} + +// Compute the start and end points of the gradient line for a linear gradient. +static void +ComputeLinearGradientLine(nsPresContext* aPresContext, + nsStyleGradient* aGradient, + const gfxSize& aBoxSize, + gfxPoint* aLineStart, + gfxPoint* aLineEnd) +{ + if (aGradient->mBgPosX.GetUnit() == eStyleUnit_None) { + double angle; + if (aGradient->mAngle.IsAngleValue()) { + angle = aGradient->mAngle.GetAngleValueInRadians(); + if (!aGradient->mLegacySyntax) { + angle = M_PI_2 - angle; + } + } else { + angle = -M_PI_2; // defaults to vertical gradient starting from top + } + gfxPoint center(aBoxSize.width/2, aBoxSize.height/2); + *aLineEnd = ComputeGradientLineEndFromAngle(center, angle, aBoxSize); + *aLineStart = gfxPoint(aBoxSize.width, aBoxSize.height) - *aLineEnd; + } else if (!aGradient->mLegacySyntax) { + float xSign = aGradient->mBgPosX.GetPercentValue() * 2 - 1; + float ySign = 1 - aGradient->mBgPosY.GetPercentValue() * 2; + double angle = atan2(ySign * aBoxSize.width, xSign * aBoxSize.height); + gfxPoint center(aBoxSize.width/2, aBoxSize.height/2); + *aLineEnd = ComputeGradientLineEndFromAngle(center, angle, aBoxSize); + *aLineStart = gfxPoint(aBoxSize.width, aBoxSize.height) - *aLineEnd; + } else { + int32_t appUnitsPerPixel = aPresContext->AppUnitsPerDevPixel(); + *aLineStart = gfxPoint( + ConvertGradientValueToPixels(aGradient->mBgPosX, aBoxSize.width, + appUnitsPerPixel), + ConvertGradientValueToPixels(aGradient->mBgPosY, aBoxSize.height, + appUnitsPerPixel)); + if (aGradient->mAngle.IsAngleValue()) { + MOZ_ASSERT(aGradient->mLegacySyntax); + double angle = aGradient->mAngle.GetAngleValueInRadians(); + *aLineEnd = ComputeGradientLineEndFromAngle(*aLineStart, angle, aBoxSize); + } else { + // No angle, the line end is just the reflection of the start point + // through the center of the box + *aLineEnd = gfxPoint(aBoxSize.width, aBoxSize.height) - *aLineStart; + } + } +} + +// Compute the start and end points of the gradient line for a radial gradient. +// Also returns the horizontal and vertical radii defining the circle or +// ellipse to use. +static void +ComputeRadialGradientLine(nsPresContext* aPresContext, + nsStyleGradient* aGradient, + const gfxSize& aBoxSize, + gfxPoint* aLineStart, + gfxPoint* aLineEnd, + double* aRadiusX, + double* aRadiusY) +{ + if (aGradient->mBgPosX.GetUnit() == eStyleUnit_None) { + // Default line start point is the center of the box + *aLineStart = gfxPoint(aBoxSize.width/2, aBoxSize.height/2); + } else { + int32_t appUnitsPerPixel = aPresContext->AppUnitsPerDevPixel(); + *aLineStart = gfxPoint( + ConvertGradientValueToPixels(aGradient->mBgPosX, aBoxSize.width, + appUnitsPerPixel), + ConvertGradientValueToPixels(aGradient->mBgPosY, aBoxSize.height, + appUnitsPerPixel)); + } + + // Compute gradient shape: the x and y radii of an ellipse. + double radiusX, radiusY; + double leftDistance = Abs(aLineStart->x); + double rightDistance = Abs(aBoxSize.width - aLineStart->x); + double topDistance = Abs(aLineStart->y); + double bottomDistance = Abs(aBoxSize.height - aLineStart->y); + switch (aGradient->mSize) { + case NS_STYLE_GRADIENT_SIZE_CLOSEST_SIDE: + radiusX = std::min(leftDistance, rightDistance); + radiusY = std::min(topDistance, bottomDistance); + if (aGradient->mShape == NS_STYLE_GRADIENT_SHAPE_CIRCULAR) { + radiusX = radiusY = std::min(radiusX, radiusY); + } + break; + case NS_STYLE_GRADIENT_SIZE_CLOSEST_CORNER: { + // Compute x and y distances to nearest corner + double offsetX = std::min(leftDistance, rightDistance); + double offsetY = std::min(topDistance, bottomDistance); + if (aGradient->mShape == NS_STYLE_GRADIENT_SHAPE_CIRCULAR) { + radiusX = radiusY = NS_hypot(offsetX, offsetY); + } else { + // maintain aspect ratio + radiusX = offsetX*M_SQRT2; + radiusY = offsetY*M_SQRT2; + } + break; + } + case NS_STYLE_GRADIENT_SIZE_FARTHEST_SIDE: + radiusX = std::max(leftDistance, rightDistance); + radiusY = std::max(topDistance, bottomDistance); + if (aGradient->mShape == NS_STYLE_GRADIENT_SHAPE_CIRCULAR) { + radiusX = radiusY = std::max(radiusX, radiusY); + } + break; + case NS_STYLE_GRADIENT_SIZE_FARTHEST_CORNER: { + // Compute x and y distances to nearest corner + double offsetX = std::max(leftDistance, rightDistance); + double offsetY = std::max(topDistance, bottomDistance); + if (aGradient->mShape == NS_STYLE_GRADIENT_SHAPE_CIRCULAR) { + radiusX = radiusY = NS_hypot(offsetX, offsetY); + } else { + // maintain aspect ratio + radiusX = offsetX*M_SQRT2; + radiusY = offsetY*M_SQRT2; + } + break; + } + case NS_STYLE_GRADIENT_SIZE_EXPLICIT_SIZE: { + int32_t appUnitsPerPixel = aPresContext->AppUnitsPerDevPixel(); + radiusX = ConvertGradientValueToPixels(aGradient->mRadiusX, + aBoxSize.width, appUnitsPerPixel); + radiusY = ConvertGradientValueToPixels(aGradient->mRadiusY, + aBoxSize.height, appUnitsPerPixel); + break; + } + default: + radiusX = radiusY = 0; + MOZ_ASSERT(false, "unknown radial gradient sizing method"); + } + *aRadiusX = radiusX; + *aRadiusY = radiusY; + + double angle; + if (aGradient->mAngle.IsAngleValue()) { + angle = aGradient->mAngle.GetAngleValueInRadians(); + } else { + // Default angle is 0deg + angle = 0.0; + } + + // The gradient line end point is where the gradient line intersects + // the ellipse. + *aLineEnd = *aLineStart + gfxPoint(radiusX*cos(-angle), radiusY*sin(-angle)); +} + + +static float Interpolate(float aF1, float aF2, float aFrac) +{ + return aF1 + aFrac * (aF2 - aF1); +} + +// Returns aFrac*aC2 + (1 - aFrac)*C1. The interpolation is done +// in unpremultiplied space, which is what SVG gradients and cairo +// gradients expect. +static Color +InterpolateColor(const Color& aC1, const Color& aC2, float aFrac) +{ + double other = 1 - aFrac; + return Color(aC2.r*aFrac + aC1.r*other, + aC2.g*aFrac + aC1.g*other, + aC2.b*aFrac + aC1.b*other, + aC2.a*aFrac + aC1.a*other); +} + +static nscoord +FindTileStart(nscoord aDirtyCoord, nscoord aTilePos, nscoord aTileDim) +{ + NS_ASSERTION(aTileDim > 0, "Non-positive tile dimension"); + double multiples = floor(double(aDirtyCoord - aTilePos)/aTileDim); + return NSToCoordRound(multiples*aTileDim + aTilePos); +} + +static gfxFloat +LinearGradientStopPositionForPoint(const gfxPoint& aGradientStart, + const gfxPoint& aGradientEnd, + const gfxPoint& aPoint) +{ + gfxPoint d = aGradientEnd - aGradientStart; + gfxPoint p = aPoint - aGradientStart; + /** + * Compute a parameter t such that a line perpendicular to the + * d vector, passing through aGradientStart + d*t, also + * passes through aPoint. + * + * t is given by + * (p.x - d.x*t)*d.x + (p.y - d.y*t)*d.y = 0 + * + * Solving for t we get + * numerator = d.x*p.x + d.y*p.y + * denominator = d.x^2 + d.y^2 + * t = numerator/denominator + * + * In nsCSSRendering::PaintGradient we know the length of d + * is not zero. + */ + double numerator = d.x * p.x + d.y * p.y; + double denominator = d.x * d.x + d.y * d.y; + return numerator / denominator; +} + +static bool +RectIsBeyondLinearGradientEdge(const gfxRect& aRect, + const gfxMatrix& aPatternMatrix, + const nsTArray& aStops, + const gfxPoint& aGradientStart, + const gfxPoint& aGradientEnd, + Color* aOutEdgeColor) +{ + gfxFloat topLeft = LinearGradientStopPositionForPoint( + aGradientStart, aGradientEnd, aPatternMatrix.Transform(aRect.TopLeft())); + gfxFloat topRight = LinearGradientStopPositionForPoint( + aGradientStart, aGradientEnd, aPatternMatrix.Transform(aRect.TopRight())); + gfxFloat bottomLeft = LinearGradientStopPositionForPoint( + aGradientStart, aGradientEnd, aPatternMatrix.Transform(aRect.BottomLeft())); + gfxFloat bottomRight = LinearGradientStopPositionForPoint( + aGradientStart, aGradientEnd, aPatternMatrix.Transform(aRect.BottomRight())); + + const ColorStop& firstStop = aStops[0]; + if (topLeft < firstStop.mPosition && topRight < firstStop.mPosition && + bottomLeft < firstStop.mPosition && bottomRight < firstStop.mPosition) { + *aOutEdgeColor = firstStop.mColor; + return true; + } + + const ColorStop& lastStop = aStops.LastElement(); + if (topLeft >= lastStop.mPosition && topRight >= lastStop.mPosition && + bottomLeft >= lastStop.mPosition && bottomRight >= lastStop.mPosition) { + *aOutEdgeColor = lastStop.mColor; + return true; + } + + return false; +} + +static void ResolveMidpoints(nsTArray& stops) +{ + for (size_t x = 1; x < stops.Length() - 1;) { + if (!stops[x].mIsMidpoint) { + x++; + continue; + } + + Color color1 = stops[x-1].mColor; + Color color2 = stops[x+1].mColor; + float offset1 = stops[x-1].mPosition; + float offset2 = stops[x+1].mPosition; + float offset = stops[x].mPosition; + // check if everything coincides. If so, ignore the midpoint. + if (offset - offset1 == offset2 - offset) { + stops.RemoveElementAt(x); + continue; + } + + // Check if we coincide with the left colorstop. + if (offset1 == offset) { + // Morph the midpoint to a regular stop with the color of the next + // color stop. + stops[x].mColor = color2; + stops[x].mIsMidpoint = false; + continue; + } + + // Check if we coincide with the right colorstop. + if (offset2 == offset) { + // Morph the midpoint to a regular stop with the color of the previous + // color stop. + stops[x].mColor = color1; + stops[x].mIsMidpoint = false; + continue; + } + + float midpoint = (offset - offset1) / (offset2 - offset1); + ColorStop newStops[9]; + if (midpoint > .5f) { + for (size_t y = 0; y < 7; y++) { + newStops[y].mPosition = offset1 + (offset - offset1) * (7 + y) / 13; + } + + newStops[7].mPosition = offset + (offset2 - offset) / 3; + newStops[8].mPosition = offset + (offset2 - offset) * 2 / 3; + } else { + newStops[0].mPosition = offset1 + (offset - offset1) / 3; + newStops[1].mPosition = offset1 + (offset - offset1) * 2 / 3; + + for (size_t y = 0; y < 7; y++) { + newStops[y+2].mPosition = offset + (offset2 - offset) * y / 13; + } + } + // calculate colors + + for (size_t y = 0; y < 9; y++) { + // Calculate the intermediate color stops per the formula of the CSS images + // spec. http://dev.w3.org/csswg/css-images/#color-stop-syntax + // 9 points were chosen since it is the minimum number of stops that always + // give the smoothest appearace regardless of midpoint position and difference + // in luminance of the end points. + float relativeOffset = (newStops[y].mPosition - offset1) / (offset2 - offset1); + float multiplier = powf(relativeOffset, logf(.5f) / logf(midpoint)); + + gfx::Float red = color1.r + multiplier * (color2.r - color1.r); + gfx::Float green = color1.g + multiplier * (color2.g - color1.g); + gfx::Float blue = color1.b + multiplier * (color2.b - color1.b); + gfx::Float alpha = color1.a + multiplier * (color2.a - color1.a); + + newStops[y].mColor = Color(red, green, blue, alpha); + } + + stops.ReplaceElementsAt(x, 1, newStops, 9); + x += 9; + } +} + +static Color +Premultiply(const Color& aColor) +{ + gfx::Float a = aColor.a; + return Color(aColor.r * a, aColor.g * a, aColor.b * a, a); +} + +static Color +Unpremultiply(const Color& aColor) +{ + gfx::Float a = aColor.a; + return (a > 0.f) + ? Color(aColor.r / a, aColor.g / a, aColor.b / a, a) + : aColor; +} + +static Color +TransparentColor(Color aColor) { + aColor.a = 0; + return aColor; +} + +// Adjusts and adds color stops in such a way that drawing the gradient with +// unpremultiplied interpolation looks nearly the same as if it were drawn with +// premultiplied interpolation. +static const float kAlphaIncrementPerGradientStep = 0.1f; +static void +ResolvePremultipliedAlpha(nsTArray& aStops) +{ + for (size_t x = 1; x < aStops.Length(); x++) { + const ColorStop leftStop = aStops[x - 1]; + const ColorStop rightStop = aStops[x]; + + // if the left and right stop have the same alpha value, we don't need + // to do anything + if (leftStop.mColor.a == rightStop.mColor.a) { + continue; + } + + // Is the stop on the left 100% transparent? If so, have it adopt the color + // of the right stop + if (leftStop.mColor.a == 0) { + aStops[x - 1].mColor = TransparentColor(rightStop.mColor); + continue; + } + + // Is the stop on the right completely transparent? + // If so, duplicate it and assign it the color on the left. + if (rightStop.mColor.a == 0) { + ColorStop newStop = rightStop; + newStop.mColor = TransparentColor(leftStop.mColor); + aStops.InsertElementAt(x, newStop); + x++; + continue; + } + + // Now handle cases where one or both of the stops are partially transparent. + if (leftStop.mColor.a != 1.0f || rightStop.mColor.a != 1.0f) { + Color premulLeftColor = Premultiply(leftStop.mColor); + Color premulRightColor = Premultiply(rightStop.mColor); + // Calculate how many extra steps. We do a step per 10% transparency. + size_t stepCount = NSToIntFloor(fabsf(leftStop.mColor.a - rightStop.mColor.a) / kAlphaIncrementPerGradientStep); + for (size_t y = 1; y < stepCount; y++) { + float frac = static_cast(y) / stepCount; + ColorStop newStop(Interpolate(leftStop.mPosition, rightStop.mPosition, frac), false, + Unpremultiply(InterpolateColor(premulLeftColor, premulRightColor, frac))); + aStops.InsertElementAt(x, newStop); + x++; + } + } + } +} + +static ColorStop +InterpolateColorStop(const ColorStop& aFirst, const ColorStop& aSecond, + double aPosition, const Color& aDefault) +{ + MOZ_ASSERT(aFirst.mPosition <= aPosition); + MOZ_ASSERT(aPosition <= aSecond.mPosition); + + double delta = aSecond.mPosition - aFirst.mPosition; + + if (delta < 1e-6) { + return ColorStop(aPosition, false, aDefault); + } + + return ColorStop(aPosition, false, + Unpremultiply(InterpolateColor(Premultiply(aFirst.mColor), + Premultiply(aSecond.mColor), + (aPosition - aFirst.mPosition) / delta))); +} + +// Clamp and extend the given ColorStop array in-place to fit exactly into the +// range [0, 1]. +static void +ClampColorStops(nsTArray& aStops) +{ + MOZ_ASSERT(aStops.Length() > 0); + + // If all stops are outside the range, then get rid of everything and replace + // with a single colour. + if (aStops.Length() < 2 || aStops[0].mPosition > 1 || + aStops.LastElement().mPosition < 0) { + Color c = aStops[0].mPosition > 1 ? aStops[0].mColor : aStops.LastElement().mColor; + aStops.Clear(); + aStops.AppendElement(ColorStop(0, false, c)); + return; + } + + // Create the 0 and 1 points if they fall in the range of |aStops|, and discard + // all stops outside the range [0, 1]. + // XXX: If we have stops positioned at 0 or 1, we only keep the innermost of + // those stops. This should be fine for the current user(s) of this function. + for (size_t i = aStops.Length() - 1; i > 0; i--) { + if (aStops[i - 1].mPosition < 1 && aStops[i].mPosition >= 1) { + // Add a point to position 1. + aStops[i] = InterpolateColorStop(aStops[i - 1], aStops[i], + /* aPosition = */ 1, + aStops[i - 1].mColor); + // Remove all the elements whose position is greater than 1. + aStops.RemoveElementsAt(i + 1, aStops.Length() - (i + 1)); + } + if (aStops[i - 1].mPosition <= 0 && aStops[i].mPosition > 0) { + // Add a point to position 0. + aStops[i - 1] = InterpolateColorStop(aStops[i - 1], aStops[i], + /* aPosition = */ 0, + aStops[i].mColor); + // Remove all of the preceding stops -- they are all negative. + aStops.RemoveElementsAt(0, i - 1); + break; + } + } + + MOZ_ASSERT(aStops[0].mPosition >= -1e6); + MOZ_ASSERT(aStops.LastElement().mPosition - 1 <= 1e6); + + // The end points won't exist yet if they don't fall in the original range of + // |aStops|. Create them if needed. + if (aStops[0].mPosition > 0) { + aStops.InsertElementAt(0, ColorStop(0, false, aStops[0].mColor)); + } + if (aStops.LastElement().mPosition < 1) { + aStops.AppendElement(ColorStop(1, false, aStops.LastElement().mColor)); + } +} + +void +nsCSSRendering::PaintGradient(nsPresContext* aPresContext, + nsRenderingContext& aRenderingContext, + nsStyleGradient* aGradient, + const nsRect& aDirtyRect, + const nsRect& aDest, + const nsRect& aFillArea, + const nsSize& aRepeatSize, + const CSSIntRect& aSrc, + const nsSize& aIntrinsicSize) +{ + PROFILER_LABEL("nsCSSRendering", "PaintGradient", + js::ProfileEntry::Category::GRAPHICS); + + Telemetry::AutoTimer gradientTimer; + if (aDest.IsEmpty() || aFillArea.IsEmpty()) { + return; + } + + gfxContext *ctx = aRenderingContext.ThebesContext(); + nscoord appUnitsPerDevPixel = aPresContext->AppUnitsPerDevPixel(); + gfxSize srcSize = gfxSize(gfxFloat(aIntrinsicSize.width)/appUnitsPerDevPixel, + gfxFloat(aIntrinsicSize.height)/appUnitsPerDevPixel); + + bool cellContainsFill = aDest.Contains(aFillArea); + + // Compute "gradient line" start and end relative to the intrinsic size of + // the gradient. + gfxPoint lineStart, lineEnd; + double radiusX = 0, radiusY = 0; // for radial gradients only + if (aGradient->mShape == NS_STYLE_GRADIENT_SHAPE_LINEAR) { + ComputeLinearGradientLine(aPresContext, aGradient, srcSize, + &lineStart, &lineEnd); + } else { + ComputeRadialGradientLine(aPresContext, aGradient, srcSize, + &lineStart, &lineEnd, &radiusX, &radiusY); + } + // Avoid sending Infs or Nans to downwind draw targets. + if (!lineStart.IsFinite() || !lineEnd.IsFinite()) { + lineStart = lineEnd = gfxPoint(0, 0); + } + gfxFloat lineLength = NS_hypot(lineEnd.x - lineStart.x, + lineEnd.y - lineStart.y); + + MOZ_ASSERT(aGradient->mStops.Length() >= 2, + "The parser should reject gradients with less than two stops"); + + // Build color stop array and compute stop positions + nsTArray stops; + // If there is a run of stops before stop i that did not have specified + // positions, then this is the index of the first stop in that run, otherwise + // it's -1. + int32_t firstUnsetPosition = -1; + for (uint32_t i = 0; i < aGradient->mStops.Length(); ++i) { + const nsStyleGradientStop& stop = aGradient->mStops[i]; + double position; + switch (stop.mLocation.GetUnit()) { + case eStyleUnit_None: + if (i == 0) { + // First stop defaults to position 0.0 + position = 0.0; + } else if (i == aGradient->mStops.Length() - 1) { + // Last stop defaults to position 1.0 + position = 1.0; + } else { + // Other stops with no specified position get their position assigned + // later by interpolation, see below. + // Remeber where the run of stops with no specified position starts, + // if it starts here. + if (firstUnsetPosition < 0) { + firstUnsetPosition = i; + } + stops.AppendElement(ColorStop(0, stop.mIsInterpolationHint, + Color::FromABGR(stop.mColor))); + continue; + } + break; + case eStyleUnit_Percent: + position = stop.mLocation.GetPercentValue(); + break; + case eStyleUnit_Coord: + position = lineLength < 1e-6 ? 0.0 : + stop.mLocation.GetCoordValue() / appUnitsPerDevPixel / lineLength; + break; + case eStyleUnit_Calc: + nsStyleCoord::Calc *calc; + calc = stop.mLocation.GetCalcValue(); + position = calc->mPercent + + ((lineLength < 1e-6) ? 0.0 : + (NSAppUnitsToFloatPixels(calc->mLength, appUnitsPerDevPixel) / lineLength)); + break; + default: + MOZ_ASSERT(false, "Unknown stop position type"); + } + + if (i > 0) { + // Prevent decreasing stop positions by advancing this position + // to the previous stop position, if necessary + position = std::max(position, stops[i - 1].mPosition); + } + stops.AppendElement(ColorStop(position, stop.mIsInterpolationHint, + Color::FromABGR(stop.mColor))); + if (firstUnsetPosition > 0) { + // Interpolate positions for all stops that didn't have a specified position + double p = stops[firstUnsetPosition - 1].mPosition; + double d = (stops[i].mPosition - p)/(i - firstUnsetPosition + 1); + for (uint32_t j = firstUnsetPosition; j < i; ++j) { + p += d; + stops[j].mPosition = p; + } + firstUnsetPosition = -1; + } + } + + // If a non-repeating linear gradient is axis-aligned and there are no gaps + // between tiles, we can optimise away most of the work by converting to a + // repeating linear gradient and filling the whole destination rect at once. + bool forceRepeatToCoverTiles = + aGradient->mShape == NS_STYLE_GRADIENT_SHAPE_LINEAR && + (lineStart.x == lineEnd.x) != (lineStart.y == lineEnd.y) && + aRepeatSize.width == aDest.width && aRepeatSize.height == aDest.height && + !aGradient->mRepeating && !aSrc.IsEmpty() && !cellContainsFill; + + gfxMatrix matrix; + if (forceRepeatToCoverTiles) { + // Length of the source rectangle along the gradient axis. + double rectLen; + // The position of the start of the rectangle along the gradient. + double offset; + + // The gradient line is "backwards". Flip the line upside down to make + // things easier, and then rotate the matrix to turn everything back the + // right way up. + if (lineStart.x > lineEnd.x || lineStart.y > lineEnd.y) { + std::swap(lineStart, lineEnd); + matrix.Scale(-1, -1); + } + + // Fit the gradient line exactly into the source rect. + // aSrc is relative to aIntrinsincSize. + // srcRectDev will be relative to srcSize, so in the same coordinate space + // as lineStart / lineEnd. + gfxRect srcRectDev = nsLayoutUtils::RectToGfxRect( + CSSPixel::ToAppUnits(aSrc), appUnitsPerDevPixel); + if (lineStart.x != lineEnd.x) { + rectLen = srcRectDev.width; + offset = (srcRectDev.x - lineStart.x) / lineLength; + lineStart.x = srcRectDev.x; + lineEnd.x = srcRectDev.XMost(); + } else { + rectLen = srcRectDev.height; + offset = (srcRectDev.y - lineStart.y) / lineLength; + lineStart.y = srcRectDev.y; + lineEnd.y = srcRectDev.YMost(); + } + + // Adjust gradient stop positions for the new gradient line. + double scale = lineLength / rectLen; + for (size_t i = 0; i < stops.Length(); i++) { + stops[i].mPosition = (stops[i].mPosition - offset) * fabs(scale); + } + + // Clamp or extrapolate gradient stops to exactly [0, 1]. + ClampColorStops(stops); + + lineLength = rectLen; + } + + // Eliminate negative-position stops if the gradient is radial. + double firstStop = stops[0].mPosition; + if (aGradient->mShape != NS_STYLE_GRADIENT_SHAPE_LINEAR && firstStop < 0.0) { + if (aGradient->mRepeating) { + // Choose an instance of the repeated pattern that gives us all positive + // stop-offsets. + double lastStop = stops[stops.Length() - 1].mPosition; + double stopDelta = lastStop - firstStop; + // If all the stops are in approximately the same place then logic below + // will kick in that makes us draw just the last stop color, so don't + // try to do anything in that case. We certainly need to avoid + // dividing by zero. + if (stopDelta >= 1e-6) { + double instanceCount = ceil(-firstStop/stopDelta); + // Advance stops by instanceCount multiples of the period of the + // repeating gradient. + double offset = instanceCount*stopDelta; + for (uint32_t i = 0; i < stops.Length(); i++) { + stops[i].mPosition += offset; + } + } + } else { + // Move negative-position stops to position 0.0. We may also need + // to set the color of the stop to the color the gradient should have + // at the center of the ellipse. + for (uint32_t i = 0; i < stops.Length(); i++) { + double pos = stops[i].mPosition; + if (pos < 0.0) { + stops[i].mPosition = 0.0; + // If this is the last stop, we don't need to adjust the color, + // it will fill the entire area. + if (i < stops.Length() - 1) { + double nextPos = stops[i + 1].mPosition; + // If nextPos is approximately equal to pos, then we don't + // need to adjust the color of this stop because it's + // not going to be displayed. + // If nextPos is negative, we don't need to adjust the color of + // this stop since it's not going to be displayed because + // nextPos will also be moved to 0.0. + if (nextPos >= 0.0 && nextPos - pos >= 1e-6) { + // Compute how far the new position 0.0 is along the interval + // between pos and nextPos. + // XXX Color interpolation (in cairo, too) should use the + // CSS 'color-interpolation' property! + float frac = float((0.0 - pos)/(nextPos - pos)); + stops[i].mColor = + InterpolateColor(stops[i].mColor, stops[i + 1].mColor, frac); + } + } + } + } + } + firstStop = stops[0].mPosition; + MOZ_ASSERT(firstStop >= 0.0, "Failed to fix stop offsets"); + } + + if (aGradient->mShape != NS_STYLE_GRADIENT_SHAPE_LINEAR && !aGradient->mRepeating) { + // Direct2D can only handle a particular class of radial gradients because + // of the way the it specifies gradients. Setting firstStop to 0, when we + // can, will help us stay on the fast path. Currently we don't do this + // for repeating gradients but we could by adjusting the stop collection + // to start at 0 + firstStop = 0; + } + + double lastStop = stops[stops.Length() - 1].mPosition; + // Cairo gradients must have stop positions in the range [0, 1]. So, + // stop positions will be normalized below by subtracting firstStop and then + // multiplying by stopScale. + double stopScale; + double stopOrigin = firstStop; + double stopEnd = lastStop; + double stopDelta = lastStop - firstStop; + bool zeroRadius = aGradient->mShape != NS_STYLE_GRADIENT_SHAPE_LINEAR && + (radiusX < 1e-6 || radiusY < 1e-6); + if (stopDelta < 1e-6 || lineLength < 1e-6 || zeroRadius) { + // Stops are all at the same place. Map all stops to 0.0. + // For repeating radial gradients, or for any radial gradients with + // a zero radius, we need to fill with the last stop color, so just set + // both radii to 0. + if (aGradient->mRepeating || zeroRadius) { + radiusX = radiusY = 0.0; + } + stopDelta = 0.0; + lastStop = firstStop; + } + + // Don't normalize non-repeating or degenerate gradients below 0..1 + // This keeps the gradient line as large as the box and doesn't + // lets us avoiding having to get padding correct for stops + // at 0 and 1 + if (!aGradient->mRepeating || stopDelta == 0.0) { + stopOrigin = std::min(stopOrigin, 0.0); + stopEnd = std::max(stopEnd, 1.0); + } + stopScale = 1.0/(stopEnd - stopOrigin); + + // Create the gradient pattern. + RefPtr gradientPattern; + gfxPoint gradientStart; + gfxPoint gradientEnd; + if (aGradient->mShape == NS_STYLE_GRADIENT_SHAPE_LINEAR) { + // Compute the actual gradient line ends we need to pass to cairo after + // stops have been normalized. + gradientStart = lineStart + (lineEnd - lineStart)*stopOrigin; + gradientEnd = lineStart + (lineEnd - lineStart)*stopEnd; + gfxPoint gradientStopStart = lineStart + (lineEnd - lineStart)*firstStop; + gfxPoint gradientStopEnd = lineStart + (lineEnd - lineStart)*lastStop; + + if (stopDelta == 0.0) { + // Stops are all at the same place. For repeating gradients, this will + // just paint the last stop color. We don't need to do anything. + // For non-repeating gradients, this should render as two colors, one + // on each "side" of the gradient line segment, which is a point. All + // our stops will be at 0.0; we just need to set the direction vector + // correctly. + gradientEnd = gradientStart + (lineEnd - lineStart); + gradientStopEnd = gradientStopStart + (lineEnd - lineStart); + } + + gradientPattern = new gfxPattern(gradientStart.x, gradientStart.y, + gradientEnd.x, gradientEnd.y); + } else { + NS_ASSERTION(firstStop >= 0.0, + "Negative stops not allowed for radial gradients"); + + // To form an ellipse, we'll stretch a circle vertically, if necessary. + // So our radii are based on radiusX. + double innerRadius = radiusX*stopOrigin; + double outerRadius = radiusX*stopEnd; + if (stopDelta == 0.0) { + // Stops are all at the same place. See above (except we now have + // the inside vs. outside of an ellipse). + outerRadius = innerRadius + 1; + } + gradientPattern = new gfxPattern(lineStart.x, lineStart.y, innerRadius, + lineStart.x, lineStart.y, outerRadius); + if (radiusX != radiusY) { + // Stretch the circles into ellipses vertically by setting a transform + // in the pattern. + // Recall that this is the transform from user space to pattern space. + // So to stretch the ellipse by factor of P vertically, we scale + // user coordinates by 1/P. + matrix.Translate(lineStart); + matrix.Scale(1.0, radiusX/radiusY); + matrix.Translate(-lineStart); + } + } + // Use a pattern transform to take account of source and dest rects + matrix.Translate(gfxPoint(aPresContext->CSSPixelsToDevPixels(aSrc.x), + aPresContext->CSSPixelsToDevPixels(aSrc.y))); + matrix.Scale(gfxFloat(aPresContext->CSSPixelsToAppUnits(aSrc.width))/aDest.width, + gfxFloat(aPresContext->CSSPixelsToAppUnits(aSrc.height))/aDest.height); + gradientPattern->SetMatrix(matrix); + + if (gradientPattern->CairoStatus()) + return; + + if (stopDelta == 0.0) { + // Non-repeating gradient with all stops in same place -> just add + // first stop and last stop, both at position 0. + // Repeating gradient with all stops in the same place, or radial + // gradient with radius of 0 -> just paint the last stop color. + // We use firstStop offset to keep |stops| with same units (will later normalize to 0). + Color firstColor(stops[0].mColor); + Color lastColor(stops.LastElement().mColor); + stops.Clear(); + + if (!aGradient->mRepeating && !zeroRadius) { + stops.AppendElement(ColorStop(firstStop, false, firstColor)); + } + stops.AppendElement(ColorStop(firstStop, false, lastColor)); + } + + ResolveMidpoints(stops); + ResolvePremultipliedAlpha(stops); + + bool isRepeat = aGradient->mRepeating || forceRepeatToCoverTiles; + + // Now set normalized color stops in pattern. + // Offscreen gradient surface cache (not a tile): + // On some backends (e.g. D2D), the GradientStops object holds an offscreen surface + // which is a lookup table used to evaluate the gradient. This surface can use + // much memory (ram and/or GPU ram) and can be expensive to create. So we cache it. + // The cache key correlates 1:1 with the arguments for CreateGradientStops (also the implied backend type) + // Note that GradientStop is a simple struct with a stop value (while GradientStops has the surface). + nsTArray rawStops(stops.Length()); + rawStops.SetLength(stops.Length()); + for(uint32_t i = 0; i < stops.Length(); i++) { + rawStops[i].color = stops[i].mColor; + rawStops[i].offset = stopScale * (stops[i].mPosition - stopOrigin); + } + RefPtr gs = + gfxGradientCache::GetOrCreateGradientStops(ctx->GetDrawTarget(), + rawStops, + isRepeat ? gfx::ExtendMode::REPEAT : gfx::ExtendMode::CLAMP); + gradientPattern->SetColorStops(gs); + + // Paint gradient tiles. This isn't terribly efficient, but doing it this + // way is simple and sure to get pixel-snapping right. We could speed things + // up by drawing tiles into temporary surfaces and copying those to the + // destination, but after pixel-snapping tiles may not all be the same size. + nsRect dirty; + if (!dirty.IntersectRect(aDirtyRect, aFillArea)) + return; + + gfxRect areaToFill = + nsLayoutUtils::RectToGfxRect(aFillArea, appUnitsPerDevPixel); + gfxRect dirtyAreaToFill = nsLayoutUtils::RectToGfxRect(dirty, appUnitsPerDevPixel); + dirtyAreaToFill.RoundOut(); + + gfxMatrix ctm = ctx->CurrentMatrix(); + bool isCTMPreservingAxisAlignedRectangles = ctm.PreservesAxisAlignedRectangles(); + + // xStart/yStart are the top-left corner of the top-left tile. + nscoord xStart = FindTileStart(dirty.x, aDest.x, aRepeatSize.width); + nscoord yStart = FindTileStart(dirty.y, aDest.y, aRepeatSize.height); + nscoord xEnd = forceRepeatToCoverTiles ? xStart + aDest.width : dirty.XMost(); + nscoord yEnd = forceRepeatToCoverTiles ? yStart + aDest.height : dirty.YMost(); + + // x and y are the top-left corner of the tile to draw + for (nscoord y = yStart; y < yEnd; y += aRepeatSize.height) { + for (nscoord x = xStart; x < xEnd; x += aRepeatSize.width) { + // The coordinates of the tile + gfxRect tileRect = nsLayoutUtils::RectToGfxRect( + nsRect(x, y, aDest.width, aDest.height), + appUnitsPerDevPixel); + // The actual area to fill with this tile is the intersection of this + // tile with the overall area we're supposed to be filling + gfxRect fillRect = + forceRepeatToCoverTiles ? areaToFill : tileRect.Intersect(areaToFill); + // Try snapping the fill rect. Snap its top-left and bottom-right + // independently to preserve the orientation. + gfxPoint snappedFillRectTopLeft = fillRect.TopLeft(); + gfxPoint snappedFillRectTopRight = fillRect.TopRight(); + gfxPoint snappedFillRectBottomRight = fillRect.BottomRight(); + // Snap three points instead of just two to ensure we choose the + // correct orientation if there's a reflection. + if (isCTMPreservingAxisAlignedRectangles && + ctx->UserToDevicePixelSnapped(snappedFillRectTopLeft, true) && + ctx->UserToDevicePixelSnapped(snappedFillRectBottomRight, true) && + ctx->UserToDevicePixelSnapped(snappedFillRectTopRight, true)) { + if (snappedFillRectTopLeft.x == snappedFillRectBottomRight.x || + snappedFillRectTopLeft.y == snappedFillRectBottomRight.y) { + // Nothing to draw; avoid scaling by zero and other weirdness that + // could put the context in an error state. + continue; + } + // Set the context's transform to the transform that maps fillRect to + // snappedFillRect. The part of the gradient that was going to + // exactly fill fillRect will fill snappedFillRect instead. + gfxMatrix transform = gfxUtils::TransformRectToRect(fillRect, + snappedFillRectTopLeft, snappedFillRectTopRight, + snappedFillRectBottomRight); + ctx->SetMatrix(transform); + } + ctx->NewPath(); + ctx->Rectangle(fillRect); + + gfxRect dirtyFillRect = fillRect.Intersect(dirtyAreaToFill); + gfxRect fillRectRelativeToTile = dirtyFillRect - tileRect.TopLeft(); + Color edgeColor; + if (aGradient->mShape == NS_STYLE_GRADIENT_SHAPE_LINEAR && !isRepeat && + RectIsBeyondLinearGradientEdge(fillRectRelativeToTile, matrix, stops, + gradientStart, gradientEnd, &edgeColor)) { + ctx->SetColor(edgeColor); + } else { + ctx->SetMatrix( + ctx->CurrentMatrix().Copy().Translate(tileRect.TopLeft())); + ctx->SetPattern(gradientPattern); + } + ctx->Fill(); + ctx->SetMatrix(ctm); + } + } +} + +static CompositionOp +DetermineCompositionOp(const nsCSSRendering::PaintBGParams& aParams, + const nsStyleImageLayers& aLayers, + uint32_t aLayerIndex) +{ + if (aParams.layer >= 0) { + // When drawing a single layer, use the specified composition op. + return aParams.compositionOp; + } + + const nsStyleImageLayers::Layer& layer = aLayers.mLayers[aLayerIndex]; + // When drawing all layers, get the compositon op from each image layer. + if (aParams.paintFlags & nsCSSRendering::PAINTBG_MASK_IMAGE) { + // Always using OP_OVER mode while drawing the bottom mask layer. + if (aLayerIndex == (aLayers.mImageCount - 1)) { + return CompositionOp::OP_OVER; + } + + return nsCSSRendering::GetGFXCompositeMode(layer.mComposite); + } + + return nsCSSRendering::GetGFXBlendMode(layer.mBlendMode); +} + +DrawResult +nsCSSRendering::PaintBackgroundWithSC(const PaintBGParams& aParams, + nsStyleContext *aBackgroundSC, + const nsStyleBorder& aBorder) +{ + NS_PRECONDITION(aParams.frame, + "Frame is expected to be provided to PaintBackground"); + + // If we're drawing all layers, aCompositonOp is ignored, so make sure that + // it was left at its default value. + MOZ_ASSERT_IF(aParams.layer == -1, + aParams.compositionOp == CompositionOp::OP_OVER); + + DrawResult result = DrawResult::SUCCESS; + + // Check to see if we have an appearance defined. If so, we let the theme + // renderer draw the background and bail out. + // XXXzw this ignores aParams.bgClipRect. + const nsStyleDisplay* displayData = aParams.frame->StyleDisplay(); + if (displayData->mAppearance) { + nsITheme *theme = aParams.presCtx.GetTheme(); + if (theme && theme->ThemeSupportsWidget(&aParams.presCtx, + aParams.frame, + displayData->mAppearance)) { + nsRect drawing(aParams.borderArea); + theme->GetWidgetOverflow(aParams.presCtx.DeviceContext(), + aParams.frame, displayData->mAppearance, + &drawing); + drawing.IntersectRect(drawing, aParams.dirtyRect); + theme->DrawWidgetBackground(&aParams.renderingCtx, aParams.frame, + displayData->mAppearance, aParams.borderArea, + drawing); + return DrawResult::SUCCESS; + } + } + + // For canvas frames (in the CSS sense) we draw the background color using + // a solid color item that gets added in nsLayoutUtils::PaintFrame, + // or nsSubDocumentFrame::BuildDisplayList (bug 488242). (The solid + // color may be moved into nsDisplayCanvasBackground by + // nsPresShell::AddCanvasBackgroundColorItem, and painted by + // nsDisplayCanvasBackground directly.) Either way we don't need to + // paint the background color here. + bool isCanvasFrame = IsCanvasFrame(aParams.frame); + + // Determine whether we are drawing background images and/or + // background colors. + bool drawBackgroundImage; + bool drawBackgroundColor; + + nscolor bgColor = DetermineBackgroundColor(&aParams.presCtx, + aBackgroundSC, + aParams.frame, + drawBackgroundImage, + drawBackgroundColor); + + bool paintMask = (aParams.paintFlags & PAINTBG_MASK_IMAGE); + const nsStyleImageLayers& layers = paintMask ? + aBackgroundSC->StyleSVGReset()->mMask : + aBackgroundSC->StyleBackground()->mImage; + // If we're drawing a specific layer, we don't want to draw the + // background color. + if ((drawBackgroundColor && aParams.layer >= 0) || paintMask) { + drawBackgroundColor = false; + } + + // At this point, drawBackgroundImage and drawBackgroundColor are + // true if and only if we are actually supposed to paint an image or + // color into aDirtyRect, respectively. + if (!drawBackgroundImage && !drawBackgroundColor) + return DrawResult::SUCCESS; + + // Compute the outermost boundary of the area that might be painted. + // Same coordinate space as aParams.borderArea & aParams.bgClipRect. + Sides skipSides = aParams.frame->GetSkipSides(); + nsRect paintBorderArea = + ::BoxDecorationRectForBackground(aParams.frame, aParams.borderArea, + skipSides, &aBorder); + nsRect clipBorderArea = + ::BoxDecorationRectForBorder(aParams.frame, aParams.borderArea, + skipSides, &aBorder); + + // The 'bgClipArea' (used only by the image tiling logic, far below) + // is the caller-provided aParams.bgClipRect if any, or else the area + // determined by the value of 'background-clip' in + // SetupCurrentBackgroundClip. (Arguably it should be the + // intersection, but that breaks the table painter -- in particular, + // taking the intersection breaks reftests/bugs/403249-1[ab].) + gfxContext* ctx = aParams.renderingCtx.ThebesContext(); + nscoord appUnitsPerPixel = aParams.presCtx.AppUnitsPerDevPixel(); + ImageLayerClipState clipState; + if (aParams.bgClipRect) { + clipState.mBGClipArea = *aParams.bgClipRect; + clipState.mCustomClip = true; + clipState.mHasRoundedCorners = false; + SetupDirtyRects(clipState.mBGClipArea, aParams.dirtyRect, appUnitsPerPixel, + &clipState.mDirtyRect, &clipState.mDirtyRectGfx); + } else { + GetImageLayerClip(layers.BottomLayer(), + aParams.frame, aBorder, aParams.borderArea, + aParams.dirtyRect, + (aParams.paintFlags & PAINTBG_WILL_PAINT_BORDER), + appUnitsPerPixel, + &clipState); + } + + // If we might be using a background color, go ahead and set it now. + if (drawBackgroundColor && !isCanvasFrame) + ctx->SetColor(Color::FromABGR(bgColor)); + + // NOTE: no Save() yet, we do that later by calling autoSR.EnsureSaved(ctx) + // in the cases we need it. + gfxContextAutoSaveRestore autoSR; + + // If there is no background image, draw a color. (If there is + // neither a background image nor a color, we wouldn't have gotten + // this far.) + if (!drawBackgroundImage) { + if (!isCanvasFrame) { + DrawBackgroundColor(clipState, ctx, appUnitsPerPixel); + } + return DrawResult::SUCCESS; + } + + if (layers.mImageCount < 1) { + // Return if there are no background layers, all work from this point + // onwards happens iteratively on these. + return DrawResult::SUCCESS; + } + + // Validate the layer range before we start iterating. + int32_t startLayer = aParams.layer; + int32_t nLayers = 1; + if (startLayer < 0) { + startLayer = (int32_t)layers.mImageCount - 1; + nLayers = layers.mImageCount; + } + + // Ensure we get invalidated for loads of the image. We need to do + // this here because this might be the only code that knows about the + // association of the style data with the frame. + if (aBackgroundSC != aParams.frame->StyleContext()) { + NS_FOR_VISIBLE_IMAGE_LAYERS_BACK_TO_FRONT_WITH_RANGE(i, layers, startLayer, nLayers) { + aParams.frame->AssociateImage(layers.mLayers[i].mImage, + &aParams.presCtx); + } + } + + // The background color is rendered over the entire dirty area, + // even if the image isn't. + if (drawBackgroundColor && !isCanvasFrame) { + DrawBackgroundColor(clipState, ctx, appUnitsPerPixel); + } + + if (drawBackgroundImage) { + bool clipSet = false; + uint8_t currentBackgroundClip = NS_STYLE_IMAGELAYER_CLIP_BORDER; + NS_FOR_VISIBLE_IMAGE_LAYERS_BACK_TO_FRONT_WITH_RANGE(i, layers, layers.mImageCount - 1, + nLayers + (layers.mImageCount - + startLayer - 1)) { + const nsStyleImageLayers::Layer& layer = layers.mLayers[i]; + if (!aParams.bgClipRect) { + if (currentBackgroundClip != layer.mClip || !clipSet) { + currentBackgroundClip = layer.mClip; + // If clipSet is false that means this is the bottom layer and we + // already called GetImageLayerClip above and it stored its results + // in clipState. + if (clipSet) { + autoSR.Restore(); // reset the previous one + GetImageLayerClip(layer, aParams.frame, + aBorder, aParams.borderArea, aParams.dirtyRect, + (aParams.paintFlags & PAINTBG_WILL_PAINT_BORDER), + appUnitsPerPixel, &clipState); + } + SetupImageLayerClip(clipState, ctx, appUnitsPerPixel, &autoSR); + clipSet = true; + if (!clipBorderArea.IsEqualEdges(aParams.borderArea)) { + // We're drawing the background for the joined continuation boxes + // so we need to clip that to the slice that we want for this + // frame. + gfxRect clip = + nsLayoutUtils::RectToGfxRect(aParams.borderArea, appUnitsPerPixel); + autoSR.EnsureSaved(ctx); + ctx->NewPath(); + ctx->SnappedRectangle(clip); + ctx->Clip(); + } + } + } + if ((aParams.layer < 0 || i == (uint32_t)startLayer) && + !clipState.mDirtyRectGfx.IsEmpty()) { + CompositionOp co = DetermineCompositionOp(aParams, layers, i); + nsBackgroundLayerState state = + PrepareImageLayer(&aParams.presCtx, aParams.frame, + aParams.paintFlags, paintBorderArea, clipState.mBGClipArea, + layer, nullptr); + result &= state.mImageRenderer.PrepareResult(); + if (!state.mFillArea.IsEmpty()) { + if (co != CompositionOp::OP_OVER) { + NS_ASSERTION(ctx->CurrentOp() == CompositionOp::OP_OVER, + "It is assumed the initial op is OP_OVER, when it is " + "restored later"); + ctx->SetOp(co); + } + + result &= + state.mImageRenderer.DrawBackground(&aParams.presCtx, + aParams.renderingCtx, + state.mDestArea, state.mFillArea, + state.mAnchor + paintBorderArea.TopLeft(), + clipState.mDirtyRect, + state.mRepeatSize); + + if (co != CompositionOp::OP_OVER) { + ctx->SetOp(CompositionOp::OP_OVER); + } + } + } + } + } + + return result; +} + +nsRect +nsCSSRendering::ComputeImageLayerPositioningArea(nsPresContext* aPresContext, + nsIFrame* aForFrame, + const nsRect& aBorderArea, + const nsStyleImageLayers::Layer& aLayer, + nsIFrame** aAttachedToFrame, + bool* aOutIsTransformedFixed) +{ + // Compute background origin area relative to aBorderArea now as we may need + // it to compute the effective image size for a CSS gradient. + nsRect bgPositioningArea; + + nsIAtom* frameType = aForFrame->GetType(); + nsIFrame* geometryFrame = aForFrame; + if (MOZ_UNLIKELY(frameType == nsGkAtoms::scrollFrame && + NS_STYLE_IMAGELAYER_ATTACHMENT_LOCAL == aLayer.mAttachment)) { + nsIScrollableFrame* scrollableFrame = do_QueryFrame(aForFrame); + bgPositioningArea = nsRect( + scrollableFrame->GetScrolledFrame()->GetPosition() + // For the dir=rtl case: + + scrollableFrame->GetScrollRange().TopLeft(), + scrollableFrame->GetScrolledRect().Size()); + // The ScrolledRect’s size does not include the borders or scrollbars, + // reverse the handling of background-origin + // compared to the common case below. + if (aLayer.mOrigin == NS_STYLE_IMAGELAYER_ORIGIN_BORDER) { + nsMargin border = geometryFrame->GetUsedBorder(); + border.ApplySkipSides(geometryFrame->GetSkipSides()); + bgPositioningArea.Inflate(border); + bgPositioningArea.Inflate(scrollableFrame->GetActualScrollbarSizes()); + } else if (aLayer.mOrigin != NS_STYLE_IMAGELAYER_ORIGIN_PADDING) { + nsMargin padding = geometryFrame->GetUsedPadding(); + padding.ApplySkipSides(geometryFrame->GetSkipSides()); + bgPositioningArea.Deflate(padding); + NS_ASSERTION(aLayer.mOrigin == NS_STYLE_IMAGELAYER_ORIGIN_CONTENT, + "unknown background-origin value"); + } + *aAttachedToFrame = aForFrame; + return bgPositioningArea; + } + + if (MOZ_UNLIKELY(frameType == nsGkAtoms::canvasFrame)) { + geometryFrame = aForFrame->PrincipalChildList().FirstChild(); + // geometryFrame might be null if this canvas is a page created + // as an overflow container (e.g. the in-flow content has already + // finished and this page only displays the continuations of + // absolutely positioned content). + if (geometryFrame) { + bgPositioningArea = geometryFrame->GetRect(); + } + } else { + bgPositioningArea = nsRect(nsPoint(0,0), aBorderArea.Size()); + } + + // Background images are tiled over the 'background-clip' area + // but the origin of the tiling is based on the 'background-origin' area + // XXX: Bug 1303623 will bring in new origin value, we should iterate from + // NS_STYLE_IMAGELAYER_ORIGIN_MARGIN instead of + // NS_STYLE_IMAGELAYER_ORIGIN_BORDER. + if (aLayer.mOrigin != NS_STYLE_IMAGELAYER_ORIGIN_BORDER && geometryFrame) { + nsMargin border = geometryFrame->GetUsedBorder(); + if (aLayer.mOrigin != NS_STYLE_IMAGELAYER_ORIGIN_PADDING) { + border += geometryFrame->GetUsedPadding(); + NS_ASSERTION(aLayer.mOrigin == NS_STYLE_IMAGELAYER_ORIGIN_CONTENT, + "unknown background-origin value"); + } + bgPositioningArea.Deflate(border); + } + + nsIFrame* attachedToFrame = aForFrame; + if (NS_STYLE_IMAGELAYER_ATTACHMENT_FIXED == aLayer.mAttachment) { + // If it's a fixed background attachment, then the image is placed + // relative to the viewport, which is the area of the root frame + // in a screen context or the page content frame in a print context. + attachedToFrame = aPresContext->PresShell()->FrameManager()->GetRootFrame(); + NS_ASSERTION(attachedToFrame, "no root frame"); + nsIFrame* pageContentFrame = nullptr; + if (aPresContext->IsPaginated()) { + pageContentFrame = + nsLayoutUtils::GetClosestFrameOfType(aForFrame, nsGkAtoms::pageContentFrame); + if (pageContentFrame) { + attachedToFrame = pageContentFrame; + } + // else this is an embedded shell and its root frame is what we want + } + + // If the background is affected by a transform, treat is as if it + // wasn't fixed. + if (nsLayoutUtils::IsTransformed(aForFrame, attachedToFrame)) { + attachedToFrame = aForFrame; + *aOutIsTransformedFixed = true; + } else { + // Set the background positioning area to the viewport's area + // (relative to aForFrame) + bgPositioningArea = + nsRect(-aForFrame->GetOffsetTo(attachedToFrame), attachedToFrame->GetSize()); + + if (!pageContentFrame) { + // Subtract the size of scrollbars. + nsIScrollableFrame* scrollableFrame = + aPresContext->PresShell()->GetRootScrollFrameAsScrollable(); + if (scrollableFrame) { + nsMargin scrollbars = scrollableFrame->GetActualScrollbarSizes(); + bgPositioningArea.Deflate(scrollbars); + } + } + } + } + *aAttachedToFrame = attachedToFrame; + + return bgPositioningArea; +} + +// Implementation of the formula for computation of background-repeat round +// See http://dev.w3.org/csswg/css3-background/#the-background-size +// This function returns the adjusted size of the background image. +static nscoord +ComputeRoundedSize(nscoord aCurrentSize, nscoord aPositioningSize) +{ + float repeatCount = NS_roundf(float(aPositioningSize) / float(aCurrentSize)); + if (repeatCount < 1.0f) { + return aPositioningSize; + } + return nscoord(NS_lround(float(aPositioningSize) / repeatCount)); +} + +// Apply the CSS image sizing algorithm as it applies to background images. +// See http://www.w3.org/TR/css3-background/#the-background-size . +// aIntrinsicSize is the size that the background image 'would like to be'. +// It can be found by calling nsImageRenderer::ComputeIntrinsicSize. +static nsSize +ComputeDrawnSizeForBackground(const CSSSizeOrRatio& aIntrinsicSize, + const nsSize& aBgPositioningArea, + const nsStyleImageLayers::Size& aLayerSize, + uint8_t aXRepeat, uint8_t aYRepeat) +{ + nsSize imageSize; + + // Size is dictated by cover or contain rules. + if (aLayerSize.mWidthType == nsStyleImageLayers::Size::eContain || + aLayerSize.mWidthType == nsStyleImageLayers::Size::eCover) { + nsImageRenderer::FitType fitType = + aLayerSize.mWidthType == nsStyleImageLayers::Size::eCover + ? nsImageRenderer::COVER + : nsImageRenderer::CONTAIN; + imageSize = nsImageRenderer::ComputeConstrainedSize(aBgPositioningArea, + aIntrinsicSize.mRatio, + fitType); + } else { + // No cover/contain constraint, use default algorithm. + CSSSizeOrRatio specifiedSize; + if (aLayerSize.mWidthType == nsStyleImageLayers::Size::eLengthPercentage) { + specifiedSize.SetWidth( + aLayerSize.ResolveWidthLengthPercentage(aBgPositioningArea)); + } + if (aLayerSize.mHeightType == nsStyleImageLayers::Size::eLengthPercentage) { + specifiedSize.SetHeight( + aLayerSize.ResolveHeightLengthPercentage(aBgPositioningArea)); + } + + imageSize = nsImageRenderer::ComputeConcreteSize(specifiedSize, + aIntrinsicSize, + aBgPositioningArea); + } + + // See https://www.w3.org/TR/css3-background/#background-size . + // "If 'background-repeat' is 'round' for one (or both) dimensions, there is a second + // step. The UA must scale the image in that dimension (or both dimensions) so that + // it fits a whole number of times in the background positioning area." + // "If 'background-repeat' is 'round' for one dimension only and if 'background-size' + // is 'auto' for the other dimension, then there is a third step: that other dimension + // is scaled so that the original aspect ratio is restored." + bool isRepeatRoundInBothDimensions = aXRepeat == NS_STYLE_IMAGELAYER_REPEAT_ROUND && + aYRepeat == NS_STYLE_IMAGELAYER_REPEAT_ROUND; + + // Calculate the rounded size only if the background-size computation + // returned a correct size for the image. + if (imageSize.width && aXRepeat == NS_STYLE_IMAGELAYER_REPEAT_ROUND) { + imageSize.width = ComputeRoundedSize(imageSize.width, aBgPositioningArea.width); + if (!isRepeatRoundInBothDimensions && + aLayerSize.mHeightType == nsStyleImageLayers::Size::DimensionType::eAuto) { + // Restore intrinsic rato + if (aIntrinsicSize.mRatio.width) { + float scale = float(aIntrinsicSize.mRatio.height) / aIntrinsicSize.mRatio.width; + imageSize.height = NSCoordSaturatingNonnegativeMultiply(imageSize.width, scale); + } + } + } + + // Calculate the rounded size only if the background-size computation + // returned a correct size for the image. + if (imageSize.height && aYRepeat == NS_STYLE_IMAGELAYER_REPEAT_ROUND) { + imageSize.height = ComputeRoundedSize(imageSize.height, aBgPositioningArea.height); + if (!isRepeatRoundInBothDimensions && + aLayerSize.mWidthType == nsStyleImageLayers::Size::DimensionType::eAuto) { + // Restore intrinsic rato + if (aIntrinsicSize.mRatio.height) { + float scale = float(aIntrinsicSize.mRatio.width) / aIntrinsicSize.mRatio.height; + imageSize.width = NSCoordSaturatingNonnegativeMultiply(imageSize.height, scale); + } + } + } + + return imageSize; +} + +/* ComputeSpacedRepeatSize + * aImageDimension: the image width/height + * aAvailableSpace: the background positioning area width/height + * aRepeat: determine whether the image is repeated + * Returns the image size plus gap size of app units for use as spacing + */ +static nscoord +ComputeSpacedRepeatSize(nscoord aImageDimension, + nscoord aAvailableSpace, + bool& aRepeat) { + float ratio = static_cast(aAvailableSpace) / aImageDimension; + + if (ratio < 2.0f) { // If you can't repeat at least twice, then don't repeat. + aRepeat = false; + return aImageDimension; + } else { + aRepeat = true; + return (aAvailableSpace - aImageDimension) / (NSToIntFloor(ratio) - 1); + } +} + +/* ComputeBorderSpacedRepeatSize + * aImageDimension: the image width/height + * aAvailableSpace: the background positioning area width/height + * aSpace: the space between each image + * Returns the image size plus gap size of app units for use as spacing + */ +static nscoord +ComputeBorderSpacedRepeatSize(nscoord aImageDimension, + nscoord aAvailableSpace, + nscoord& aSpace) +{ + int32_t count = aAvailableSpace / aImageDimension; + aSpace = (aAvailableSpace - aImageDimension * count) / (count + 1); + return aSpace + aImageDimension; +} + +nsBackgroundLayerState +nsCSSRendering::PrepareImageLayer(nsPresContext* aPresContext, + nsIFrame* aForFrame, + uint32_t aFlags, + const nsRect& aBorderArea, + const nsRect& aBGClipRect, + const nsStyleImageLayers::Layer& aLayer, + bool* aOutIsTransformedFixed) +{ + /* + * The properties we need to keep in mind when drawing style image + * layers are: + * + * background-image/ mask-image + * background-repeat/ mask-repeat + * background-attachment + * background-position/ mask-position + * background-clip/ mask-clip + * background-origin/ mask-origin + * background-size/ mask-size + * background-blend-mode + * box-decoration-break + * mask-mode + * mask-composite + * + * (background-color applies to the entire element and not to individual + * layers, so it is irrelevant to this method.) + * + * These properties have the following dependencies upon each other when + * determining rendering: + * + * background-image/ mask-image + * no dependencies + * background-repeat/ mask-repeat + * no dependencies + * background-attachment + * no dependencies + * background-position/ mask-position + * depends upon background-size/mask-size (for the image's scaled size) + * and background-break (for the background positioning area) + * background-clip/ mask-clip + * no dependencies + * background-origin/ mask-origin + * depends upon background-attachment (only in the case where that value + * is 'fixed') + * background-size/ mask-size + * depends upon box-decoration-break (for the background positioning area + * for resolving percentages), background-image (for the image's intrinsic + * size), background-repeat (if that value is 'round'), and + * background-origin (for the background painting area, when + * background-repeat is 'round') + * background-blend-mode + * no dependencies + * mask-mode + * no dependencies + * mask-composite + * no dependencies + * box-decoration-break + * no dependencies + * + * As a result of only-if dependencies we don't strictly do a topological + * sort of the above properties when processing, but it's pretty close to one: + * + * background-clip/mask-clip (by caller) + * background-image/ mask-image + * box-decoration-break, background-origin/ mask origin + * background-attachment (postfix for background-origin if 'fixed') + * background-size/ mask-size + * background-position/ mask-position + * background-repeat/ mask-repeat + */ + + uint32_t irFlags = 0; + if (aFlags & nsCSSRendering::PAINTBG_SYNC_DECODE_IMAGES) { + irFlags |= nsImageRenderer::FLAG_SYNC_DECODE_IMAGES; + } + if (aFlags & nsCSSRendering::PAINTBG_TO_WINDOW) { + irFlags |= nsImageRenderer::FLAG_PAINTING_TO_WINDOW; + } + + nsBackgroundLayerState state(aForFrame, &aLayer.mImage, irFlags); + if (!state.mImageRenderer.PrepareImage()) { + // There's no image or it's not ready to be painted. + if (aOutIsTransformedFixed) { + *aOutIsTransformedFixed = false; + } + return state; + } + + // The frame to which the background is attached + nsIFrame* attachedToFrame = aForFrame; + // Is the background marked 'fixed', but affected by a transform? + bool transformedFixed = false; + // Compute background origin area relative to aBorderArea now as we may need + // it to compute the effective image size for a CSS gradient. + nsRect bgPositioningArea = + ComputeImageLayerPositioningArea(aPresContext, aForFrame, aBorderArea, + aLayer, &attachedToFrame, &transformedFixed); + if (aOutIsTransformedFixed) { + *aOutIsTransformedFixed = transformedFixed; + } + + // For background-attachment:fixed backgrounds, we'll limit the area + // where the background can be drawn to the viewport. + nsRect bgClipRect = aBGClipRect; + + // Compute the anchor point. + // + // relative to aBorderArea.TopLeft() (which is where the top-left + // of aForFrame's border-box will be rendered) + nsPoint imageTopLeft; + if (NS_STYLE_IMAGELAYER_ATTACHMENT_FIXED == aLayer.mAttachment && !transformedFixed) { + if (aFlags & nsCSSRendering::PAINTBG_TO_WINDOW) { + // Clip background-attachment:fixed backgrounds to the viewport, if we're + // painting to the screen and not transformed. This avoids triggering + // tiling in common cases, without affecting output since drawing is + // always clipped to the viewport when we draw to the screen. (But it's + // not a pure optimization since it can affect the values of pixels at the + // edge of the viewport --- whether they're sampled from a putative "next + // tile" or not.) + bgClipRect.IntersectRect(bgClipRect, bgPositioningArea + aBorderArea.TopLeft()); + } + } + + int repeatX = aLayer.mRepeat.mXRepeat; + int repeatY = aLayer.mRepeat.mYRepeat; + + // Scale the image as specified for background-size and background-repeat. + // Also as required for proper background positioning when background-position + // is defined with percentages. + CSSSizeOrRatio intrinsicSize = state.mImageRenderer.ComputeIntrinsicSize(); + nsSize bgPositionSize = bgPositioningArea.Size(); + nsSize imageSize = ComputeDrawnSizeForBackground(intrinsicSize, + bgPositionSize, + aLayer.mSize, + repeatX, + repeatY); + + if (imageSize.width <= 0 || imageSize.height <= 0) + return state; + + state.mImageRenderer.SetPreferredSize(intrinsicSize, + imageSize); + + // Compute the position of the background now that the background's size is + // determined. + nsImageRenderer::ComputeObjectAnchorPoint(aLayer.mPosition, + bgPositionSize, imageSize, + &imageTopLeft, &state.mAnchor); + state.mRepeatSize = imageSize; + if (repeatX == NS_STYLE_IMAGELAYER_REPEAT_SPACE) { + bool isRepeat; + state.mRepeatSize.width = ComputeSpacedRepeatSize(imageSize.width, + bgPositionSize.width, + isRepeat); + if (isRepeat) { + imageTopLeft.x = 0; + state.mAnchor.x = 0; + } else { + repeatX = NS_STYLE_IMAGELAYER_REPEAT_NO_REPEAT; + } + } + + if (repeatY == NS_STYLE_IMAGELAYER_REPEAT_SPACE) { + bool isRepeat; + state.mRepeatSize.height = ComputeSpacedRepeatSize(imageSize.height, + bgPositionSize.height, + isRepeat); + if (isRepeat) { + imageTopLeft.y = 0; + state.mAnchor.y = 0; + } else { + repeatY = NS_STYLE_IMAGELAYER_REPEAT_NO_REPEAT; + } + } + + imageTopLeft += bgPositioningArea.TopLeft(); + state.mAnchor += bgPositioningArea.TopLeft(); + state.mDestArea = nsRect(imageTopLeft + aBorderArea.TopLeft(), imageSize); + state.mFillArea = state.mDestArea; + + ExtendMode repeatMode = ExtendMode::CLAMP; + if (repeatX == NS_STYLE_IMAGELAYER_REPEAT_REPEAT || + repeatX == NS_STYLE_IMAGELAYER_REPEAT_ROUND || + repeatX == NS_STYLE_IMAGELAYER_REPEAT_SPACE) { + state.mFillArea.x = bgClipRect.x; + state.mFillArea.width = bgClipRect.width; + repeatMode = ExtendMode::REPEAT_X; + } + if (repeatY == NS_STYLE_IMAGELAYER_REPEAT_REPEAT || + repeatY == NS_STYLE_IMAGELAYER_REPEAT_ROUND || + repeatY == NS_STYLE_IMAGELAYER_REPEAT_SPACE) { + state.mFillArea.y = bgClipRect.y; + state.mFillArea.height = bgClipRect.height; + + /*** + * We're repeating on the X axis already, + * so if we have to repeat in the Y axis, + * we really need to repeat in both directions. + */ + if (repeatMode == ExtendMode::REPEAT_X) { + repeatMode = ExtendMode::REPEAT; + } else { + repeatMode = ExtendMode::REPEAT_Y; + } + } + state.mImageRenderer.SetExtendMode(repeatMode); + state.mImageRenderer.SetMaskOp(aLayer.mMaskMode); + + state.mFillArea.IntersectRect(state.mFillArea, bgClipRect); + + return state; +} + +nsRect +nsCSSRendering::GetBackgroundLayerRect(nsPresContext* aPresContext, + nsIFrame* aForFrame, + const nsRect& aBorderArea, + const nsRect& aClipRect, + const nsStyleImageLayers::Layer& aLayer, + uint32_t aFlags) +{ + Sides skipSides = aForFrame->GetSkipSides(); + nsRect borderArea = + ::BoxDecorationRectForBackground(aForFrame, aBorderArea, skipSides); + nsBackgroundLayerState state = + PrepareImageLayer(aPresContext, aForFrame, aFlags, borderArea, + aClipRect, aLayer); + return state.mFillArea; +} + +static DrawResult +DrawBorderImage(nsPresContext* aPresContext, + nsRenderingContext& aRenderingContext, + nsIFrame* aForFrame, + const nsRect& aBorderArea, + const nsStyleBorder& aStyleBorder, + const nsRect& aDirtyRect, + Sides aSkipSides, + PaintBorderFlags aFlags) +{ + NS_PRECONDITION(aStyleBorder.IsBorderImageLoaded(), + "drawing border image that isn't successfully loaded"); + + if (aDirtyRect.IsEmpty()) { + return DrawResult::SUCCESS; + } + + uint32_t irFlags = 0; + if (aFlags & PaintBorderFlags::SYNC_DECODE_IMAGES) { + irFlags |= nsImageRenderer::FLAG_SYNC_DECODE_IMAGES; + } + nsImageRenderer renderer(aForFrame, &aStyleBorder.mBorderImageSource, irFlags); + + // Ensure we get invalidated for loads and animations of the image. + // We need to do this here because this might be the only code that + // knows about the association of the style data with the frame. + // XXX We shouldn't really... since if anybody is passing in a + // different style, they'll potentially have the wrong size for the + // border too. + aForFrame->AssociateImage(aStyleBorder.mBorderImageSource, aPresContext); + + if (!renderer.PrepareImage()) { + return renderer.PrepareResult(); + } + + // NOTE: no Save() yet, we do that later by calling autoSR.EnsureSaved() + // in case we need it. + gfxContextAutoSaveRestore autoSR; + + // Determine the border image area, which by default corresponds to the + // border box but can be modified by 'border-image-outset'. + // Note that 'border-radius' do not apply to 'border-image' borders per + // . + nsRect borderImgArea; + nsMargin borderWidths(aStyleBorder.GetComputedBorder()); + nsMargin imageOutset(aStyleBorder.GetImageOutset()); + if (::IsBoxDecorationSlice(aStyleBorder) && !aSkipSides.IsEmpty()) { + borderImgArea = ::BoxDecorationRectForBorder(aForFrame, aBorderArea, + aSkipSides, &aStyleBorder); + if (borderImgArea.IsEqualEdges(aBorderArea)) { + // No need for a clip, just skip the sides we don't want. + borderWidths.ApplySkipSides(aSkipSides); + imageOutset.ApplySkipSides(aSkipSides); + borderImgArea.Inflate(imageOutset); + } else { + // We're drawing borders around the joined continuation boxes so we need + // to clip that to the slice that we want for this frame. + borderImgArea.Inflate(imageOutset); + imageOutset.ApplySkipSides(aSkipSides); + nsRect clip = aBorderArea; + clip.Inflate(imageOutset); + autoSR.EnsureSaved(aRenderingContext.ThebesContext()); + aRenderingContext.ThebesContext()-> + Clip(NSRectToSnappedRect(clip, + aForFrame->PresContext()->AppUnitsPerDevPixel(), + *aRenderingContext.GetDrawTarget())); + } + } else { + borderImgArea = aBorderArea; + borderImgArea.Inflate(imageOutset); + } + + // Calculate the image size used to compute slice points. + CSSSizeOrRatio intrinsicSize = renderer.ComputeIntrinsicSize(); + nsSize imageSize = nsImageRenderer::ComputeConcreteSize(CSSSizeOrRatio(), + intrinsicSize, + borderImgArea.Size()); + renderer.SetPreferredSize(intrinsicSize, imageSize); + + // Compute the used values of 'border-image-slice' and 'border-image-width'; + // we do them together because the latter can depend on the former. + nsMargin slice; + nsMargin border; + NS_FOR_CSS_SIDES(s) { + nsStyleCoord coord = aStyleBorder.mBorderImageSlice.Get(s); + int32_t imgDimension = NS_SIDE_IS_VERTICAL(s) + ? imageSize.width : imageSize.height; + nscoord borderDimension = NS_SIDE_IS_VERTICAL(s) + ? borderImgArea.width : borderImgArea.height; + double value; + switch (coord.GetUnit()) { + case eStyleUnit_Percent: + value = coord.GetPercentValue() * imgDimension; + break; + case eStyleUnit_Factor: + value = nsPresContext::CSSPixelsToAppUnits( + NS_lround(coord.GetFactorValue())); + break; + default: + NS_NOTREACHED("unexpected CSS unit for image slice"); + value = 0; + break; + } + if (value < 0) + value = 0; + if (value > imgDimension) + value = imgDimension; + slice.Side(s) = value; + + coord = aStyleBorder.mBorderImageWidth.Get(s); + switch (coord.GetUnit()) { + case eStyleUnit_Coord: // absolute dimension + value = coord.GetCoordValue(); + break; + case eStyleUnit_Percent: + value = coord.GetPercentValue() * borderDimension; + break; + case eStyleUnit_Factor: + value = coord.GetFactorValue() * borderWidths.Side(s); + break; + case eStyleUnit_Auto: // same as the slice value, in CSS pixels + value = slice.Side(s); + break; + default: + NS_NOTREACHED("unexpected CSS unit for border image area division"); + value = 0; + break; + } + // NSToCoordRoundWithClamp rounds towards infinity, but that's OK + // because we expect value to be non-negative. + MOZ_ASSERT(value >= 0); + border.Side(s) = NSToCoordRoundWithClamp(value); + MOZ_ASSERT(border.Side(s) >= 0); + } + + // "If two opposite border-image-width offsets are large enough that they + // overlap, their used values are proportionately reduced until they no + // longer overlap." + uint32_t combinedBorderWidth = uint32_t(border.left) + + uint32_t(border.right); + double scaleX = combinedBorderWidth > uint32_t(borderImgArea.width) + ? borderImgArea.width / double(combinedBorderWidth) + : 1.0; + uint32_t combinedBorderHeight = uint32_t(border.top) + + uint32_t(border.bottom); + double scaleY = combinedBorderHeight > uint32_t(borderImgArea.height) + ? borderImgArea.height / double(combinedBorderHeight) + : 1.0; + double scale = std::min(scaleX, scaleY); + if (scale < 1.0) { + border.left *= scale; + border.right *= scale; + border.top *= scale; + border.bottom *= scale; + NS_ASSERTION(border.left + border.right <= borderImgArea.width && + border.top + border.bottom <= borderImgArea.height, + "rounding error in width reduction???"); + } + + // These helper tables recharacterize the 'slice' and 'width' margins + // in a more convenient form: they are the x/y/width/height coords + // required for various bands of the border, and they have been transformed + // to be relative to the innerRect (for 'slice') or the page (for 'border'). + enum { + LEFT, MIDDLE, RIGHT, + TOP = LEFT, BOTTOM = RIGHT + }; + const nscoord borderX[3] = { + borderImgArea.x + 0, + borderImgArea.x + border.left, + borderImgArea.x + borderImgArea.width - border.right, + }; + const nscoord borderY[3] = { + borderImgArea.y + 0, + borderImgArea.y + border.top, + borderImgArea.y + borderImgArea.height - border.bottom, + }; + const nscoord borderWidth[3] = { + border.left, + borderImgArea.width - border.left - border.right, + border.right, + }; + const nscoord borderHeight[3] = { + border.top, + borderImgArea.height - border.top - border.bottom, + border.bottom, + }; + const int32_t sliceX[3] = { + 0, + slice.left, + imageSize.width - slice.right, + }; + const int32_t sliceY[3] = { + 0, + slice.top, + imageSize.height - slice.bottom, + }; + const int32_t sliceWidth[3] = { + slice.left, + std::max(imageSize.width - slice.left - slice.right, 0), + slice.right, + }; + const int32_t sliceHeight[3] = { + slice.top, + std::max(imageSize.height - slice.top - slice.bottom, 0), + slice.bottom, + }; + + DrawResult result = DrawResult::SUCCESS; + + // intrinsicSize.CanComputeConcreteSize() return false means we can not + // read intrinsic size from aStyleBorder.mBorderImageSource. + // In this condition, we pass imageSize(a resolved size comes from + // default sizing algorithm) to renderer as the viewport size. + Maybe svgViewportSize = intrinsicSize.CanComputeConcreteSize() ? + Nothing() : Some(imageSize); + bool hasIntrinsicRatio = intrinsicSize.HasRatio(); + renderer.PurgeCacheForViewportChange(svgViewportSize, hasIntrinsicRatio); + + for (int i = LEFT; i <= RIGHT; i++) { + for (int j = TOP; j <= BOTTOM; j++) { + uint8_t fillStyleH, fillStyleV; + nsSize unitSize; + + if (i == MIDDLE && j == MIDDLE) { + // Discard the middle portion unless set to fill. + if (NS_STYLE_BORDER_IMAGE_SLICE_NOFILL == + aStyleBorder.mBorderImageFill) { + continue; + } + + NS_ASSERTION(NS_STYLE_BORDER_IMAGE_SLICE_FILL == + aStyleBorder.mBorderImageFill, + "Unexpected border image fill"); + + // css-background: + // The middle image's width is scaled by the same factor as the + // top image unless that factor is zero or infinity, in which + // case the scaling factor of the bottom is substituted, and + // failing that, the width is not scaled. The height of the + // middle image is scaled by the same factor as the left image + // unless that factor is zero or infinity, in which case the + // scaling factor of the right image is substituted, and failing + // that, the height is not scaled. + gfxFloat hFactor, vFactor; + + if (0 < border.left && 0 < slice.left) + vFactor = gfxFloat(border.left)/slice.left; + else if (0 < border.right && 0 < slice.right) + vFactor = gfxFloat(border.right)/slice.right; + else + vFactor = 1; + + if (0 < border.top && 0 < slice.top) + hFactor = gfxFloat(border.top)/slice.top; + else if (0 < border.bottom && 0 < slice.bottom) + hFactor = gfxFloat(border.bottom)/slice.bottom; + else + hFactor = 1; + + unitSize.width = sliceWidth[i]*hFactor; + unitSize.height = sliceHeight[j]*vFactor; + fillStyleH = aStyleBorder.mBorderImageRepeatH; + fillStyleV = aStyleBorder.mBorderImageRepeatV; + + } else if (i == MIDDLE) { // top, bottom + // Sides are always stretched to the thickness of their border, + // and stretched proportionately on the other axis. + gfxFloat factor; + if (0 < borderHeight[j] && 0 < sliceHeight[j]) + factor = gfxFloat(borderHeight[j])/sliceHeight[j]; + else + factor = 1; + + unitSize.width = sliceWidth[i]*factor; + unitSize.height = borderHeight[j]; + fillStyleH = aStyleBorder.mBorderImageRepeatH; + fillStyleV = NS_STYLE_BORDER_IMAGE_REPEAT_STRETCH; + + } else if (j == MIDDLE) { // left, right + gfxFloat factor; + if (0 < borderWidth[i] && 0 < sliceWidth[i]) + factor = gfxFloat(borderWidth[i])/sliceWidth[i]; + else + factor = 1; + + unitSize.width = borderWidth[i]; + unitSize.height = sliceHeight[j]*factor; + fillStyleH = NS_STYLE_BORDER_IMAGE_REPEAT_STRETCH; + fillStyleV = aStyleBorder.mBorderImageRepeatV; + + } else { + // Corners are always stretched to fit the corner. + unitSize.width = borderWidth[i]; + unitSize.height = borderHeight[j]; + fillStyleH = NS_STYLE_BORDER_IMAGE_REPEAT_STRETCH; + fillStyleV = NS_STYLE_BORDER_IMAGE_REPEAT_STRETCH; + } + + nsRect destArea(borderX[i], borderY[j], borderWidth[i], borderHeight[j]); + nsRect subArea(sliceX[i], sliceY[j], sliceWidth[i], sliceHeight[j]); + if (subArea.IsEmpty()) + continue; + + nsIntRect intSubArea = subArea.ToOutsidePixels(nsPresContext::AppUnitsPerCSSPixel()); + result &= + renderer.DrawBorderImageComponent(aPresContext, + aRenderingContext, aDirtyRect, + destArea, CSSIntRect(intSubArea.x, + intSubArea.y, + intSubArea.width, + intSubArea.height), + fillStyleH, fillStyleV, + unitSize, j * (RIGHT + 1) + i, + svgViewportSize, hasIntrinsicRatio); + } + } + + return result; +} + +// Begin table border-collapsing section +// These functions were written to not disrupt the normal ones and yet satisfy some additional requirements +// At some point, all functions should be unified to include the additional functionality that these provide + +static nscoord +RoundIntToPixel(nscoord aValue, + nscoord aTwipsPerPixel, + bool aRoundDown = false) +{ + if (aTwipsPerPixel <= 0) + // We must be rendering to a device that has a resolution greater than Twips! + // In that case, aValue is as accurate as it's going to get. + return aValue; + + nscoord halfPixel = NSToCoordRound(aTwipsPerPixel / 2.0f); + nscoord extra = aValue % aTwipsPerPixel; + nscoord finalValue = (!aRoundDown && (extra >= halfPixel)) ? aValue + (aTwipsPerPixel - extra) : aValue - extra; + return finalValue; +} + +static nscoord +RoundFloatToPixel(float aValue, + nscoord aTwipsPerPixel, + bool aRoundDown = false) +{ + return RoundIntToPixel(NSToCoordRound(aValue), aTwipsPerPixel, aRoundDown); +} + +static void SetPoly(const Rect& aRect, Point* poly) +{ + poly[0].x = aRect.x; + poly[0].y = aRect.y; + poly[1].x = aRect.x + aRect.width; + poly[1].y = aRect.y; + poly[2].x = aRect.x + aRect.width; + poly[2].y = aRect.y + aRect.height; + poly[3].x = aRect.x; + poly[3].y = aRect.y + aRect.height; +} + +static void +DrawDashedSegment(DrawTarget& aDrawTarget, + nsRect aRect, + nscoord aDashLength, + nscolor aColor, + int32_t aAppUnitsPerDevPixel, + nscoord aTwipsPerPixel, + bool aHorizontal) +{ + ColorPattern color(ToDeviceColor(aColor)); + DrawOptions drawOptions(1.f, CompositionOp::OP_OVER, AntialiasMode::NONE); + StrokeOptions strokeOptions; + + Float dash[2]; + dash[0] = Float(aDashLength) / aAppUnitsPerDevPixel; + dash[1] = dash[0]; + + strokeOptions.mDashPattern = dash; + strokeOptions.mDashLength = MOZ_ARRAY_LENGTH(dash); + + if (aHorizontal) { + nsPoint left = (aRect.TopLeft() + aRect.BottomLeft()) / 2; + nsPoint right = (aRect.TopRight() + aRect.BottomRight()) / 2; + strokeOptions.mLineWidth = Float(aRect.height) / aAppUnitsPerDevPixel; + StrokeLineWithSnapping(left, right, + aAppUnitsPerDevPixel, aDrawTarget, + color, strokeOptions, drawOptions); + } else { + nsPoint top = (aRect.TopLeft() + aRect.TopRight()) / 2; + nsPoint bottom = (aRect.BottomLeft() + aRect.BottomRight()) / 2; + strokeOptions.mLineWidth = Float(aRect.width) / aAppUnitsPerDevPixel; + StrokeLineWithSnapping(top, bottom, + aAppUnitsPerDevPixel, aDrawTarget, + color, strokeOptions, drawOptions); + } +} + +static void +DrawSolidBorderSegment(DrawTarget& aDrawTarget, + nsRect aRect, + nscolor aColor, + int32_t aAppUnitsPerDevPixel, + nscoord aTwipsPerPixel, + uint8_t aStartBevelSide = 0, + nscoord aStartBevelOffset = 0, + uint8_t aEndBevelSide = 0, + nscoord aEndBevelOffset = 0) +{ + ColorPattern color(ToDeviceColor(aColor)); + DrawOptions drawOptions(1.f, CompositionOp::OP_OVER, AntialiasMode::NONE); + + // We don't need to bevel single pixel borders + if ((aRect.width == aTwipsPerPixel) || (aRect.height == aTwipsPerPixel) || + ((0 == aStartBevelOffset) && (0 == aEndBevelOffset))) { + // simple rectangle + aDrawTarget.FillRect(NSRectToSnappedRect(aRect, aAppUnitsPerDevPixel, + aDrawTarget), + color, drawOptions); + } + else { + // polygon with beveling + Point poly[4]; + SetPoly(NSRectToSnappedRect(aRect, aAppUnitsPerDevPixel, aDrawTarget), + poly); + + Float startBevelOffset = + NSAppUnitsToFloatPixels(aStartBevelOffset, aAppUnitsPerDevPixel); + switch(aStartBevelSide) { + case NS_SIDE_TOP: + poly[0].x += startBevelOffset; + break; + case NS_SIDE_BOTTOM: + poly[3].x += startBevelOffset; + break; + case NS_SIDE_RIGHT: + poly[1].y += startBevelOffset; + break; + case NS_SIDE_LEFT: + poly[0].y += startBevelOffset; + } + + Float endBevelOffset = + NSAppUnitsToFloatPixels(aEndBevelOffset, aAppUnitsPerDevPixel); + switch(aEndBevelSide) { + case NS_SIDE_TOP: + poly[1].x -= endBevelOffset; + break; + case NS_SIDE_BOTTOM: + poly[2].x -= endBevelOffset; + break; + case NS_SIDE_RIGHT: + poly[2].y -= endBevelOffset; + break; + case NS_SIDE_LEFT: + poly[3].y -= endBevelOffset; + } + + RefPtr builder = aDrawTarget.CreatePathBuilder(); + builder->MoveTo(poly[0]); + builder->LineTo(poly[1]); + builder->LineTo(poly[2]); + builder->LineTo(poly[3]); + builder->Close(); + RefPtr path = builder->Finish(); + aDrawTarget.Fill(path, color, drawOptions); + } +} + +static void +GetDashInfo(nscoord aBorderLength, + nscoord aDashLength, + nscoord aTwipsPerPixel, + int32_t& aNumDashSpaces, + nscoord& aStartDashLength, + nscoord& aEndDashLength) +{ + aNumDashSpaces = 0; + if (aStartDashLength + aDashLength + aEndDashLength >= aBorderLength) { + aStartDashLength = aBorderLength; + aEndDashLength = 0; + } + else { + aNumDashSpaces = (aBorderLength - aDashLength)/ (2 * aDashLength); // round down + nscoord extra = aBorderLength - aStartDashLength - aEndDashLength - (((2 * aNumDashSpaces) - 1) * aDashLength); + if (extra > 0) { + nscoord half = RoundIntToPixel(extra / 2, aTwipsPerPixel); + aStartDashLength += half; + aEndDashLength += (extra - half); + } + } +} + +void +nsCSSRendering::DrawTableBorderSegment(DrawTarget& aDrawTarget, + uint8_t aBorderStyle, + nscolor aBorderColor, + const nsStyleBackground* aBGColor, + const nsRect& aBorder, + int32_t aAppUnitsPerDevPixel, + int32_t aAppUnitsPerCSSPixel, + uint8_t aStartBevelSide, + nscoord aStartBevelOffset, + uint8_t aEndBevelSide, + nscoord aEndBevelOffset) +{ + bool horizontal = ((NS_SIDE_TOP == aStartBevelSide) || (NS_SIDE_BOTTOM == aStartBevelSide)); + nscoord twipsPerPixel = NSIntPixelsToAppUnits(1, aAppUnitsPerCSSPixel); + uint8_t ridgeGroove = NS_STYLE_BORDER_STYLE_RIDGE; + + if ((twipsPerPixel >= aBorder.width) || (twipsPerPixel >= aBorder.height) || + (NS_STYLE_BORDER_STYLE_DASHED == aBorderStyle) || (NS_STYLE_BORDER_STYLE_DOTTED == aBorderStyle)) { + // no beveling for 1 pixel border, dash or dot + aStartBevelOffset = 0; + aEndBevelOffset = 0; + } + + switch (aBorderStyle) { + case NS_STYLE_BORDER_STYLE_NONE: + case NS_STYLE_BORDER_STYLE_HIDDEN: + //NS_ASSERTION(false, "style of none or hidden"); + break; + case NS_STYLE_BORDER_STYLE_DOTTED: + case NS_STYLE_BORDER_STYLE_DASHED: + { + nscoord dashLength = (NS_STYLE_BORDER_STYLE_DASHED == aBorderStyle) ? DASH_LENGTH : DOT_LENGTH; + // make the dash length proportional to the border thickness + dashLength *= (horizontal) ? aBorder.height : aBorder.width; + // make the min dash length for the ends 1/2 the dash length + nscoord minDashLength = (NS_STYLE_BORDER_STYLE_DASHED == aBorderStyle) + ? RoundFloatToPixel(((float)dashLength) / 2.0f, twipsPerPixel) : dashLength; + minDashLength = std::max(minDashLength, twipsPerPixel); + nscoord numDashSpaces = 0; + nscoord startDashLength = minDashLength; + nscoord endDashLength = minDashLength; + if (horizontal) { + GetDashInfo(aBorder.width, dashLength, twipsPerPixel, numDashSpaces, + startDashLength, endDashLength); + nsRect rect(aBorder.x, aBorder.y, startDashLength, aBorder.height); + DrawSolidBorderSegment(aDrawTarget, rect, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel); + + rect.x += startDashLength + dashLength; + rect.width = aBorder.width + - (startDashLength + endDashLength + dashLength); + DrawDashedSegment(aDrawTarget, rect, dashLength, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel, horizontal); + + rect.x += rect.width; + rect.width = endDashLength; + DrawSolidBorderSegment(aDrawTarget, rect, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel); + } + else { + GetDashInfo(aBorder.height, dashLength, twipsPerPixel, numDashSpaces, + startDashLength, endDashLength); + nsRect rect(aBorder.x, aBorder.y, aBorder.width, startDashLength); + DrawSolidBorderSegment(aDrawTarget, rect, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel); + + rect.y += rect.height + dashLength; + rect.height = aBorder.height + - (startDashLength + endDashLength + dashLength); + DrawDashedSegment(aDrawTarget, rect, dashLength, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel, horizontal); + + rect.y += rect.height; + rect.height = endDashLength; + DrawSolidBorderSegment(aDrawTarget, rect, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel); + } + } + break; + case NS_STYLE_BORDER_STYLE_GROOVE: + ridgeGroove = NS_STYLE_BORDER_STYLE_GROOVE; // and fall through to ridge + MOZ_FALLTHROUGH; + case NS_STYLE_BORDER_STYLE_RIDGE: + if ((horizontal && (twipsPerPixel >= aBorder.height)) || + (!horizontal && (twipsPerPixel >= aBorder.width))) { + // a one pixel border + DrawSolidBorderSegment(aDrawTarget, aBorder, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel, + aStartBevelSide, aStartBevelOffset, + aEndBevelSide, aEndBevelOffset); + } + else { + nscoord startBevel = (aStartBevelOffset > 0) + ? RoundFloatToPixel(0.5f * (float)aStartBevelOffset, twipsPerPixel, true) : 0; + nscoord endBevel = (aEndBevelOffset > 0) + ? RoundFloatToPixel(0.5f * (float)aEndBevelOffset, twipsPerPixel, true) : 0; + mozilla::css::Side ridgeGrooveSide = (horizontal) ? NS_SIDE_TOP : NS_SIDE_LEFT; + // FIXME: In theory, this should use the visited-dependent + // background color, but I don't care. + nscolor bevelColor = MakeBevelColor(ridgeGrooveSide, ridgeGroove, + aBGColor->mBackgroundColor, + aBorderColor); + nsRect rect(aBorder); + nscoord half; + if (horizontal) { // top, bottom + half = RoundFloatToPixel(0.5f * (float)aBorder.height, twipsPerPixel); + rect.height = half; + if (NS_SIDE_TOP == aStartBevelSide) { + rect.x += startBevel; + rect.width -= startBevel; + } + if (NS_SIDE_TOP == aEndBevelSide) { + rect.width -= endBevel; + } + DrawSolidBorderSegment(aDrawTarget, rect, bevelColor, + aAppUnitsPerDevPixel, twipsPerPixel, + aStartBevelSide, startBevel, aEndBevelSide, + endBevel); + } + else { // left, right + half = RoundFloatToPixel(0.5f * (float)aBorder.width, twipsPerPixel); + rect.width = half; + if (NS_SIDE_LEFT == aStartBevelSide) { + rect.y += startBevel; + rect.height -= startBevel; + } + if (NS_SIDE_LEFT == aEndBevelSide) { + rect.height -= endBevel; + } + DrawSolidBorderSegment(aDrawTarget, rect, bevelColor, + aAppUnitsPerDevPixel, twipsPerPixel, + aStartBevelSide, startBevel, aEndBevelSide, + endBevel); + } + + rect = aBorder; + ridgeGrooveSide = (NS_SIDE_TOP == ridgeGrooveSide) ? NS_SIDE_BOTTOM : NS_SIDE_RIGHT; + // FIXME: In theory, this should use the visited-dependent + // background color, but I don't care. + bevelColor = MakeBevelColor(ridgeGrooveSide, ridgeGroove, + aBGColor->mBackgroundColor, aBorderColor); + if (horizontal) { + rect.y = rect.y + half; + rect.height = aBorder.height - half; + if (NS_SIDE_BOTTOM == aStartBevelSide) { + rect.x += startBevel; + rect.width -= startBevel; + } + if (NS_SIDE_BOTTOM == aEndBevelSide) { + rect.width -= endBevel; + } + DrawSolidBorderSegment(aDrawTarget, rect, bevelColor, + aAppUnitsPerDevPixel, twipsPerPixel, + aStartBevelSide, startBevel, aEndBevelSide, + endBevel); + } + else { + rect.x = rect.x + half; + rect.width = aBorder.width - half; + if (NS_SIDE_RIGHT == aStartBevelSide) { + rect.y += aStartBevelOffset - startBevel; + rect.height -= startBevel; + } + if (NS_SIDE_RIGHT == aEndBevelSide) { + rect.height -= endBevel; + } + DrawSolidBorderSegment(aDrawTarget, rect, bevelColor, + aAppUnitsPerDevPixel, twipsPerPixel, + aStartBevelSide, startBevel, aEndBevelSide, + endBevel); + } + } + break; + case NS_STYLE_BORDER_STYLE_DOUBLE: + // We can only do "double" borders if the thickness of the border + // is more than 2px. Otherwise, we fall through to painting a + // solid border. + if ((aBorder.width > 2*twipsPerPixel || horizontal) && + (aBorder.height > 2*twipsPerPixel || !horizontal)) { + nscoord startBevel = (aStartBevelOffset > 0) + ? RoundFloatToPixel(0.333333f * (float)aStartBevelOffset, twipsPerPixel) : 0; + nscoord endBevel = (aEndBevelOffset > 0) + ? RoundFloatToPixel(0.333333f * (float)aEndBevelOffset, twipsPerPixel) : 0; + if (horizontal) { // top, bottom + nscoord thirdHeight = RoundFloatToPixel(0.333333f * (float)aBorder.height, twipsPerPixel); + + // draw the top line or rect + nsRect topRect(aBorder.x, aBorder.y, aBorder.width, thirdHeight); + if (NS_SIDE_TOP == aStartBevelSide) { + topRect.x += aStartBevelOffset - startBevel; + topRect.width -= aStartBevelOffset - startBevel; + } + if (NS_SIDE_TOP == aEndBevelSide) { + topRect.width -= aEndBevelOffset - endBevel; + } + DrawSolidBorderSegment(aDrawTarget, topRect, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel, + aStartBevelSide, startBevel, aEndBevelSide, + endBevel); + + // draw the botom line or rect + nscoord heightOffset = aBorder.height - thirdHeight; + nsRect bottomRect(aBorder.x, aBorder.y + heightOffset, aBorder.width, aBorder.height - heightOffset); + if (NS_SIDE_BOTTOM == aStartBevelSide) { + bottomRect.x += aStartBevelOffset - startBevel; + bottomRect.width -= aStartBevelOffset - startBevel; + } + if (NS_SIDE_BOTTOM == aEndBevelSide) { + bottomRect.width -= aEndBevelOffset - endBevel; + } + DrawSolidBorderSegment(aDrawTarget, bottomRect, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel, + aStartBevelSide, startBevel, aEndBevelSide, + endBevel); + } + else { // left, right + nscoord thirdWidth = RoundFloatToPixel(0.333333f * (float)aBorder.width, twipsPerPixel); + + nsRect leftRect(aBorder.x, aBorder.y, thirdWidth, aBorder.height); + if (NS_SIDE_LEFT == aStartBevelSide) { + leftRect.y += aStartBevelOffset - startBevel; + leftRect.height -= aStartBevelOffset - startBevel; + } + if (NS_SIDE_LEFT == aEndBevelSide) { + leftRect.height -= aEndBevelOffset - endBevel; + } + DrawSolidBorderSegment(aDrawTarget, leftRect, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel, + aStartBevelSide, startBevel, aEndBevelSide, + endBevel); + + nscoord widthOffset = aBorder.width - thirdWidth; + nsRect rightRect(aBorder.x + widthOffset, aBorder.y, aBorder.width - widthOffset, aBorder.height); + if (NS_SIDE_RIGHT == aStartBevelSide) { + rightRect.y += aStartBevelOffset - startBevel; + rightRect.height -= aStartBevelOffset - startBevel; + } + if (NS_SIDE_RIGHT == aEndBevelSide) { + rightRect.height -= aEndBevelOffset - endBevel; + } + DrawSolidBorderSegment(aDrawTarget, rightRect, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel, + aStartBevelSide, startBevel, aEndBevelSide, + endBevel); + } + break; + } + // else fall through to solid + MOZ_FALLTHROUGH; + case NS_STYLE_BORDER_STYLE_SOLID: + DrawSolidBorderSegment(aDrawTarget, aBorder, aBorderColor, + aAppUnitsPerDevPixel, twipsPerPixel, aStartBevelSide, + aStartBevelOffset, aEndBevelSide, aEndBevelOffset); + break; + case NS_STYLE_BORDER_STYLE_OUTSET: + case NS_STYLE_BORDER_STYLE_INSET: + NS_ASSERTION(false, "inset, outset should have been converted to groove, ridge"); + break; + case NS_STYLE_BORDER_STYLE_AUTO: + NS_ASSERTION(false, "Unexpected 'auto' table border"); + break; + } +} + +// End table border-collapsing section + +Rect +nsCSSRendering::ExpandPaintingRectForDecorationLine( + nsIFrame* aFrame, + const uint8_t aStyle, + const Rect& aClippedRect, + const Float aICoordInFrame, + const Float aCycleLength, + bool aVertical) +{ + switch (aStyle) { + case NS_STYLE_TEXT_DECORATION_STYLE_DOTTED: + case NS_STYLE_TEXT_DECORATION_STYLE_DASHED: + case NS_STYLE_TEXT_DECORATION_STYLE_WAVY: + break; + default: + NS_ERROR("Invalid style was specified"); + return aClippedRect; + } + + nsBlockFrame* block = nullptr; + // Note that when we paint the decoration lines in relative positioned + // box, we should paint them like all of the boxes are positioned as static. + nscoord framePosInBlockAppUnits = 0; + for (nsIFrame* f = aFrame; f; f = f->GetParent()) { + block = do_QueryFrame(f); + if (block) { + break; + } + framePosInBlockAppUnits += aVertical ? + f->GetNormalPosition().y : f->GetNormalPosition().x; + } + + NS_ENSURE_TRUE(block, aClippedRect); + + nsPresContext *pc = aFrame->PresContext(); + Float framePosInBlock = Float(pc->AppUnitsToGfxUnits(framePosInBlockAppUnits)); + int32_t rectPosInBlock = + int32_t(NS_round(framePosInBlock + aICoordInFrame)); + int32_t extraStartEdge = + rectPosInBlock - (rectPosInBlock / int32_t(aCycleLength) * aCycleLength); + Rect rect(aClippedRect); + if (aVertical) { + rect.y -= extraStartEdge; + rect.height += extraStartEdge; + } else { + rect.x -= extraStartEdge; + rect.width += extraStartEdge; + } + return rect; +} + +void +nsCSSRendering::PaintDecorationLine(nsIFrame* aFrame, DrawTarget& aDrawTarget, + const PaintDecorationLineParams& aParams) +{ + NS_ASSERTION(aParams.style != NS_STYLE_TEXT_DECORATION_STYLE_NONE, + "aStyle is none"); + + Rect rect = ToRect(GetTextDecorationRectInternal(aParams.pt, aParams)); + if (rect.IsEmpty() || !rect.Intersects(aParams.dirtyRect)) { + return; + } + + if (aParams.decoration != NS_STYLE_TEXT_DECORATION_LINE_UNDERLINE && + aParams.decoration != NS_STYLE_TEXT_DECORATION_LINE_OVERLINE && + aParams.decoration != NS_STYLE_TEXT_DECORATION_LINE_LINE_THROUGH) { + NS_ERROR("Invalid decoration value!"); + return; + } + + Float lineThickness = std::max(NS_round(aParams.lineSize.height), 1.0); + + ColorPattern color(ToDeviceColor(aParams.color)); + StrokeOptions strokeOptions(lineThickness); + DrawOptions drawOptions; + + Float dash[2]; + + AutoPopClips autoPopClips(&aDrawTarget); + + switch (aParams.style) { + case NS_STYLE_TEXT_DECORATION_STYLE_SOLID: + case NS_STYLE_TEXT_DECORATION_STYLE_DOUBLE: + break; + case NS_STYLE_TEXT_DECORATION_STYLE_DASHED: { + autoPopClips.PushClipRect(rect); + Float dashWidth = lineThickness * DOT_LENGTH * DASH_LENGTH; + dash[0] = dashWidth; + dash[1] = dashWidth; + strokeOptions.mDashPattern = dash; + strokeOptions.mDashLength = MOZ_ARRAY_LENGTH(dash); + strokeOptions.mLineCap = CapStyle::BUTT; + rect = ExpandPaintingRectForDecorationLine(aFrame, aParams.style, + rect, aParams.icoordInFrame, + dashWidth * 2, + aParams.vertical); + // We should continue to draw the last dash even if it is not in the rect. + rect.width += dashWidth; + break; + } + case NS_STYLE_TEXT_DECORATION_STYLE_DOTTED: { + autoPopClips.PushClipRect(rect); + Float dashWidth = lineThickness * DOT_LENGTH; + if (lineThickness > 2.0) { + dash[0] = 0.f; + dash[1] = dashWidth * 2.f; + strokeOptions.mLineCap = CapStyle::ROUND; + } else { + dash[0] = dashWidth; + dash[1] = dashWidth; + } + strokeOptions.mDashPattern = dash; + strokeOptions.mDashLength = MOZ_ARRAY_LENGTH(dash); + rect = ExpandPaintingRectForDecorationLine(aFrame, aParams.style, + rect, aParams.icoordInFrame, + dashWidth * 2, + aParams.vertical); + // We should continue to draw the last dot even if it is not in the rect. + rect.width += dashWidth; + break; + } + case NS_STYLE_TEXT_DECORATION_STYLE_WAVY: + autoPopClips.PushClipRect(rect); + if (lineThickness > 2.0) { + drawOptions.mAntialiasMode = AntialiasMode::SUBPIXEL; + } else { + // Don't use anti-aliasing here. Because looks like lighter color wavy + // line at this case. And probably, users don't think the + // non-anti-aliased wavy line is not pretty. + drawOptions.mAntialiasMode = AntialiasMode::NONE; + } + break; + default: + NS_ERROR("Invalid style value!"); + return; + } + + // The block-direction position should be set to the middle of the line. + if (aParams.vertical) { + rect.x += lineThickness / 2; + } else { + rect.y += lineThickness / 2; + } + + switch (aParams.style) { + case NS_STYLE_TEXT_DECORATION_STYLE_SOLID: + case NS_STYLE_TEXT_DECORATION_STYLE_DOTTED: + case NS_STYLE_TEXT_DECORATION_STYLE_DASHED: { + Point p1 = rect.TopLeft(); + Point p2 = aParams.vertical ? rect.BottomLeft() : rect.TopRight(); + aDrawTarget.StrokeLine(p1, p2, color, strokeOptions, drawOptions); + return; + } + case NS_STYLE_TEXT_DECORATION_STYLE_DOUBLE: { + /** + * We are drawing double line as: + * + * +-------------------------------------------+ + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| ^ + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| | lineThickness + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| v + * | | + * | | + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| ^ + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| | lineThickness + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| v + * +-------------------------------------------+ + */ + Point p1 = rect.TopLeft(); + Point p2 = aParams.vertical ? rect.BottomLeft() : rect.TopRight(); + aDrawTarget.StrokeLine(p1, p2, color, strokeOptions, drawOptions); + + if (aParams.vertical) { + rect.width -= lineThickness; + } else { + rect.height -= lineThickness; + } + + p1 = aParams.vertical ? rect.TopRight() : rect.BottomLeft(); + p2 = rect.BottomRight(); + aDrawTarget.StrokeLine(p1, p2, color, strokeOptions, drawOptions); + return; + } + case NS_STYLE_TEXT_DECORATION_STYLE_WAVY: { + /** + * We are drawing wavy line as: + * + * P: Path, X: Painted pixel + * + * +---------------------------------------+ + * XX|X XXXXXX XXXXXX | + * PP|PX XPPPPPPX XPPPPPPX | ^ + * XX|XPX XPXXXXXXPX XPXXXXXXPX| | + * | XPX XPX XPX XPX XP|X |adv + * | XPXXXXXXPX XPXXXXXXPX X|PX | + * | XPPPPPPX XPPPPPPX |XPX v + * | XXXXXX XXXXXX | XX + * +---------------------------------------+ + * <---><---> ^ + * adv flatLengthAtVertex rightMost + * + * 1. Always starts from top-left of the drawing area, however, we need + * to draw the line from outside of the rect. Because the start + * point of the line is not good style if we draw from inside it. + * 2. First, draw horizontal line from outside the rect to top-left of + * the rect; + * 3. Goes down to bottom of the area at 45 degrees. + * 4. Slides to right horizontaly, see |flatLengthAtVertex|. + * 5. Goes up to top of the area at 45 degrees. + * 6. Slides to right horizontaly. + * 7. Repeat from 2 until reached to right-most edge of the area. + * + * In the vertical case, swap horizontal and vertical coordinates and + * directions in the above description. + */ + + Float& rectICoord = aParams.vertical ? rect.y : rect.x; + Float& rectISize = aParams.vertical ? rect.height : rect.width; + const Float rectBSize = aParams.vertical ? rect.width : rect.height; + + const Float adv = rectBSize - lineThickness; + const Float flatLengthAtVertex = + std::max((lineThickness - 1.0) * 2.0, 1.0); + + // Align the start of wavy lines to the nearest ancestor block. + const Float cycleLength = 2 * (adv + flatLengthAtVertex); + rect = ExpandPaintingRectForDecorationLine(aFrame, aParams.style, rect, + aParams.icoordInFrame, + cycleLength, aParams.vertical); + // figure out if we can trim whole cycles from the left and right edges + // of the line, to try and avoid creating an unnecessarily long and + // complex path + const Float dirtyRectICoord = aParams.vertical ? aParams.dirtyRect.y + : aParams.dirtyRect.x; + int32_t skipCycles = floor((dirtyRectICoord - rectICoord) / cycleLength); + if (skipCycles > 0) { + rectICoord += skipCycles * cycleLength; + rectISize -= skipCycles * cycleLength; + } + + rectICoord += lineThickness / 2.0; + Point pt(rect.TopLeft()); + Float& ptICoord = aParams.vertical ? pt.y : pt.x; + Float& ptBCoord = aParams.vertical ? pt.x : pt.y; + if (aParams.vertical) { + ptBCoord += adv + lineThickness / 2.0; + } + Float iCoordLimit = ptICoord + rectISize + lineThickness; + + const Float dirtyRectIMost = aParams.vertical ? + aParams.dirtyRect.YMost() : aParams.dirtyRect.XMost(); + skipCycles = floor((iCoordLimit - dirtyRectIMost) / cycleLength); + if (skipCycles > 0) { + iCoordLimit -= skipCycles * cycleLength; + } + + RefPtr builder = aDrawTarget.CreatePathBuilder(); + RefPtr path; + + ptICoord -= lineThickness; + builder->MoveTo(pt); // 1 + + ptICoord = rectICoord; + builder->LineTo(pt); // 2 + + // In vertical mode, to go "down" relative to the text we need to + // decrease the block coordinate, whereas in horizontal we increase + // it. So the sense of this flag is effectively inverted. + bool goDown = aParams.vertical ? false : true; + uint32_t iter = 0; + while (ptICoord < iCoordLimit) { + if (++iter > 1000) { + // stroke the current path and start again, to avoid pathological + // behavior in cairo with huge numbers of path segments + path = builder->Finish(); + aDrawTarget.Stroke(path, color, strokeOptions, drawOptions); + builder = aDrawTarget.CreatePathBuilder(); + builder->MoveTo(pt); + iter = 0; + } + ptICoord += adv; + ptBCoord += goDown ? adv : -adv; + + builder->LineTo(pt); // 3 and 5 + + ptICoord += flatLengthAtVertex; + builder->LineTo(pt); // 4 and 6 + + goDown = !goDown; + } + path = builder->Finish(); + aDrawTarget.Stroke(path, color, strokeOptions, drawOptions); + return; + } + default: + NS_ERROR("Invalid style value!"); + } +} + +Rect +nsCSSRendering::DecorationLineToPath(const PaintDecorationLineParams& aParams) +{ + NS_ASSERTION(aParams.style != NS_STYLE_TEXT_DECORATION_STYLE_NONE, + "aStyle is none"); + + Rect path; // To benefit from RVO, we return this from all return points + + Rect rect = ToRect(GetTextDecorationRectInternal(aParams.pt, aParams)); + if (rect.IsEmpty() || !rect.Intersects(aParams.dirtyRect)) { + return path; + } + + if (aParams.decoration != NS_STYLE_TEXT_DECORATION_LINE_UNDERLINE && + aParams.decoration != NS_STYLE_TEXT_DECORATION_LINE_OVERLINE && + aParams.decoration != NS_STYLE_TEXT_DECORATION_LINE_LINE_THROUGH) { + NS_ERROR("Invalid decoration value!"); + return path; + } + + if (aParams.style != NS_STYLE_TEXT_DECORATION_STYLE_SOLID) { + // For the moment, we support only solid text decorations. + return path; + } + + Float lineThickness = std::max(NS_round(aParams.lineSize.height), 1.0); + + // The block-direction position should be set to the middle of the line. + if (aParams.vertical) { + rect.x += lineThickness / 2; + path = Rect(rect.TopLeft() - Point(lineThickness / 2, 0.0), + Size(lineThickness, rect.Height())); + } else { + rect.y += lineThickness / 2; + path = Rect(rect.TopLeft() - Point(0.0, lineThickness / 2), + Size(rect.Width(), lineThickness)); + } + + return path; +} + +nsRect +nsCSSRendering::GetTextDecorationRect(nsPresContext* aPresContext, + const DecorationRectParams& aParams) +{ + NS_ASSERTION(aPresContext, "aPresContext is null"); + NS_ASSERTION(aParams.style != NS_STYLE_TEXT_DECORATION_STYLE_NONE, + "aStyle is none"); + + gfxRect rect = GetTextDecorationRectInternal(Point(0, 0), aParams); + // The rect values are already rounded to nearest device pixels. + nsRect r; + r.x = aPresContext->GfxUnitsToAppUnits(rect.X()); + r.y = aPresContext->GfxUnitsToAppUnits(rect.Y()); + r.width = aPresContext->GfxUnitsToAppUnits(rect.Width()); + r.height = aPresContext->GfxUnitsToAppUnits(rect.Height()); + return r; +} + +gfxRect +nsCSSRendering::GetTextDecorationRectInternal(const Point& aPt, + const DecorationRectParams& aParams) +{ + NS_ASSERTION(aParams.style <= NS_STYLE_TEXT_DECORATION_STYLE_WAVY, + "Invalid aStyle value"); + + if (aParams.style == NS_STYLE_TEXT_DECORATION_STYLE_NONE) + return gfxRect(0, 0, 0, 0); + + bool canLiftUnderline = aParams.descentLimit >= 0.0; + + gfxFloat iCoord = aParams.vertical ? aPt.y : aPt.x; + gfxFloat bCoord = aParams.vertical ? aPt.x : aPt.y; + + // 'left' and 'right' are relative to the line, so for vertical writing modes + // they will actually become top and bottom of the rendered line. + // Similarly, aLineSize.width and .height are actually length and thickness + // of the line, which runs horizontally or vertically according to aVertical. + const gfxFloat left = floor(iCoord + 0.5), + right = floor(iCoord + aParams.lineSize.width + 0.5); + + // We compute |r| as if for a horizontal text run, and then swap vertical + // and horizontal coordinates at the end if vertical was requested. + gfxRect r(left, 0, right - left, 0); + + gfxFloat lineThickness = NS_round(aParams.lineSize.height); + lineThickness = std::max(lineThickness, 1.0); + + gfxFloat ascent = NS_round(aParams.ascent); + gfxFloat descentLimit = floor(aParams.descentLimit); + + gfxFloat suggestedMaxRectHeight = std::max(std::min(ascent, descentLimit), 1.0); + r.height = lineThickness; + if (aParams.style == NS_STYLE_TEXT_DECORATION_STYLE_DOUBLE) { + /** + * We will draw double line as: + * + * +-------------------------------------------+ + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| ^ + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| | lineThickness + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| v + * | | ^ + * | | | gap + * | | v + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| ^ + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| | lineThickness + * |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX| v + * +-------------------------------------------+ + */ + gfxFloat gap = NS_round(lineThickness / 2.0); + gap = std::max(gap, 1.0); + r.height = lineThickness * 2.0 + gap; + if (canLiftUnderline) { + if (r.Height() > suggestedMaxRectHeight) { + // Don't shrink the line height, because the thickness has some meaning. + // We can just shrink the gap at this time. + r.height = std::max(suggestedMaxRectHeight, lineThickness * 2.0 + 1.0); + } + } + } else if (aParams.style == NS_STYLE_TEXT_DECORATION_STYLE_WAVY) { + /** + * We will draw wavy line as: + * + * +-------------------------------------------+ + * |XXXXX XXXXXX XXXXXX | ^ + * |XXXXXX XXXXXXXX XXXXXXXX | | lineThickness + * |XXXXXXX XXXXXXXXXX XXXXXXXXXX| v + * | XXX XXX XXX XXX XX| + * | XXXXXXXXXX XXXXXXXXXX X| + * | XXXXXXXX XXXXXXXX | + * | XXXXXX XXXXXX | + * +-------------------------------------------+ + */ + r.height = lineThickness > 2.0 ? lineThickness * 4.0 : lineThickness * 3.0; + if (canLiftUnderline) { + if (r.Height() > suggestedMaxRectHeight) { + // Don't shrink the line height even if there is not enough space, + // because the thickness has some meaning. E.g., the 1px wavy line and + // 2px wavy line can be used for different meaning in IME selections + // at same time. + r.height = std::max(suggestedMaxRectHeight, lineThickness * 2.0); + } + } + } + + gfxFloat baseline = floor(bCoord + aParams.ascent + 0.5); + gfxFloat offset = 0.0; + switch (aParams.decoration) { + case NS_STYLE_TEXT_DECORATION_LINE_UNDERLINE: + offset = aParams.offset; + if (canLiftUnderline) { + if (descentLimit < -offset + r.Height()) { + // If we can ignore the offset and the decoration line is overflowing, + // we should align the bottom edge of the decoration line rect if it's + // possible. Otherwise, we should lift up the top edge of the rect as + // far as possible. + gfxFloat offsetBottomAligned = -descentLimit + r.Height(); + gfxFloat offsetTopAligned = 0.0; + offset = std::min(offsetBottomAligned, offsetTopAligned); + } + } + break; + case NS_STYLE_TEXT_DECORATION_LINE_OVERLINE: + offset = aParams.offset - lineThickness + r.Height(); + break; + case NS_STYLE_TEXT_DECORATION_LINE_LINE_THROUGH: { + gfxFloat extra = floor(r.Height() / 2.0 + 0.5); + extra = std::max(extra, lineThickness); + offset = aParams.offset - lineThickness + extra; + break; + } + default: + NS_ERROR("Invalid decoration value!"); + } + + if (aParams.vertical) { + r.y = baseline + floor(offset + 0.5); + Swap(r.x, r.y); + Swap(r.width, r.height); + } else { + r.y = baseline - floor(offset + 0.5); + } + + return r; +} + +// ------------------ +// ImageRenderer +// ------------------ +nsImageRenderer::nsImageRenderer(nsIFrame* aForFrame, + const nsStyleImage* aImage, + uint32_t aFlags) + : mForFrame(aForFrame) + , mImage(aImage) + , mType(aImage->GetType()) + , mImageContainer(nullptr) + , mGradientData(nullptr) + , mPaintServerFrame(nullptr) + , mPrepareResult(DrawResult::NOT_READY) + , mSize(0, 0) + , mFlags(aFlags) + , mExtendMode(ExtendMode::CLAMP) + , mMaskOp(NS_STYLE_MASK_MODE_MATCH_SOURCE) +{ +} + +nsImageRenderer::~nsImageRenderer() +{ +} + +static bool +ShouldTreatAsCompleteDueToSyncDecode(const nsStyleImage* aImage, + uint32_t aFlags) +{ + if (!(aFlags & nsImageRenderer::FLAG_SYNC_DECODE_IMAGES)) { + return false; + } + + if (aImage->GetType() != eStyleImageType_Image) { + return false; + } + + imgRequestProxy* req = aImage->GetImageData(); + if (!req) { + return false; + } + + uint32_t status = 0; + if (NS_FAILED(req->GetImageStatus(&status))) { + return false; + } + + if (status & imgIRequest::STATUS_ERROR) { + // The image is "complete" since it's a corrupt image. If we created an + // imgIContainer at all, return true. + nsCOMPtr image; + req->GetImage(getter_AddRefs(image)); + return bool(image); + } + + if (!(status & imgIRequest::STATUS_LOAD_COMPLETE)) { + // We must have loaded all of the image's data and the size must be + // available, or else sync decoding won't be able to decode the image. + return false; + } + + return true; +} + +bool +nsImageRenderer::PrepareImage() +{ + if (mImage->IsEmpty()) { + mPrepareResult = DrawResult::BAD_IMAGE; + return false; + } + + if (!mImage->IsComplete()) { + // Make sure the image is actually decoding. + mImage->StartDecoding(); + + // Check again to see if we finished. + // We cannot prepare the image for rendering if it is not fully loaded. + // Special case: If we requested a sync decode and the image has loaded, push + // on through because the Draw() will do a sync decode then. + if (!mImage->IsComplete() && + !ShouldTreatAsCompleteDueToSyncDecode(mImage, mFlags)) { + mPrepareResult = DrawResult::NOT_READY; + return false; + } + } + + switch (mType) { + case eStyleImageType_Image: { + MOZ_ASSERT(mImage->GetImageData(), + "must have image data, since we checked IsEmpty above"); + nsCOMPtr srcImage; + DebugOnly rv = + mImage->GetImageData()->GetImage(getter_AddRefs(srcImage)); + MOZ_ASSERT(NS_SUCCEEDED(rv) && srcImage, + "If GetImage() is failing, mImage->IsComplete() " + "should have returned false"); + + if (!mImage->GetCropRect()) { + mImageContainer.swap(srcImage); + } else { + nsIntRect actualCropRect; + bool isEntireImage; + bool success = + mImage->ComputeActualCropRect(actualCropRect, &isEntireImage); + NS_ASSERTION(success, "ComputeActualCropRect() should not fail here"); + if (!success || actualCropRect.IsEmpty()) { + // The cropped image has zero size + mPrepareResult = DrawResult::BAD_IMAGE; + return false; + } + if (isEntireImage) { + // The cropped image is identical to the source image + mImageContainer.swap(srcImage); + } else { + nsCOMPtr subImage = ImageOps::Clip(srcImage, + actualCropRect, + Nothing()); + mImageContainer.swap(subImage); + } + } + mPrepareResult = DrawResult::SUCCESS; + break; + } + case eStyleImageType_Gradient: + mGradientData = mImage->GetGradientData(); + mPrepareResult = DrawResult::SUCCESS; + break; + case eStyleImageType_Element: + { + nsAutoString elementId = + NS_LITERAL_STRING("#") + nsDependentString(mImage->GetElementId()); + nsCOMPtr targetURI; + nsCOMPtr base = mForFrame->GetContent()->GetBaseURI(); + nsContentUtils::NewURIWithDocumentCharset(getter_AddRefs(targetURI), elementId, + mForFrame->GetContent()->GetUncomposedDoc(), base); + nsSVGPaintingProperty* property = nsSVGEffects::GetPaintingPropertyForURI( + targetURI, mForFrame->FirstContinuation(), + nsSVGEffects::BackgroundImageProperty()); + if (!property) { + mPrepareResult = DrawResult::BAD_IMAGE; + return false; + } + + // If the referenced element is an , , or