From 5f8de423f190bbb79a62f804151bc24824fa32d8 Mon Sep 17 00:00:00 2001 From: "Matt A. Tobin" Date: Fri, 2 Feb 2018 04:16:08 -0500 Subject: Add m-esr52 at 52.6.0 --- dom/media/MediaDecoderStateMachine.h | 860 +++++++++++++++++++++++++++++++++++ 1 file changed, 860 insertions(+) create mode 100644 dom/media/MediaDecoderStateMachine.h (limited to 'dom/media/MediaDecoderStateMachine.h') diff --git a/dom/media/MediaDecoderStateMachine.h b/dom/media/MediaDecoderStateMachine.h new file mode 100644 index 000000000..a61fe13d2 --- /dev/null +++ b/dom/media/MediaDecoderStateMachine.h @@ -0,0 +1,860 @@ +/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* vim:set ts=2 sw=2 sts=2 et cindent: */ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ +/* + +Each media element for a media file has one thread called the "audio thread". + +The audio thread writes the decoded audio data to the audio +hardware. This is done in a separate thread to ensure that the +audio hardware gets a constant stream of data without +interruption due to decoding or display. At some point +AudioStream will be refactored to have a callback interface +where it asks for data and this thread will no longer be +needed. + +The element/state machine also has a TaskQueue which runs in a +SharedThreadPool that is shared with all other elements/decoders. The state +machine dispatches tasks to this to call into the MediaDecoderReader to +request decoded audio or video data. The Reader will callback with decoded +sampled when it has them available, and the state machine places the decoded +samples into its queues for the consuming threads to pull from. + +The MediaDecoderReader can choose to decode asynchronously, or synchronously +and return requested samples synchronously inside it's Request*Data() +functions via callback. Asynchronous decoding is preferred, and should be +used for any new readers. + +Synchronisation of state between the thread is done via a monitor owned +by MediaDecoder. + +The lifetime of the audio thread is controlled by the state machine when +it runs on the shared state machine thread. When playback needs to occur +the audio thread is created and an event dispatched to run it. The audio +thread exits when audio playback is completed or no longer required. + +A/V synchronisation is handled by the state machine. It examines the audio +playback time and compares this to the next frame in the queue of video +frames. If it is time to play the video frame it is then displayed, otherwise +it schedules the state machine to run again at the time of the next frame. + +Frame skipping is done in the following ways: + + 1) The state machine will skip all frames in the video queue whose + display time is less than the current audio time. This ensures + the correct frame for the current time is always displayed. + + 2) The decode tasks will stop decoding interframes and read to the + next keyframe if it determines that decoding the remaining + interframes will cause playback issues. It detects this by: + a) If the amount of audio data in the audio queue drops + below a threshold whereby audio may start to skip. + b) If the video queue drops below a threshold where it + will be decoding video data that won't be displayed due + to the decode thread dropping the frame immediately. + TODO: In future we should only do this when the Reader is decoding + synchronously. + +When hardware accelerated graphics is not available, YCbCr conversion +is done on the decode task queue when video frames are decoded. + +The decode task queue pushes decoded audio and videos frames into two +separate queues - one for audio and one for video. These are kept +separate to make it easy to constantly feed audio data to the audio +hardware while allowing frame skipping of video data. These queues are +threadsafe, and neither the decode, audio, or state machine should +be able to monopolize them, and cause starvation of the other threads. + +Both queues are bounded by a maximum size. When this size is reached +the decode tasks will no longer request video or audio depending on the +queue that has reached the threshold. If both queues are full, no more +decode tasks will be dispatched to the decode task queue, so other +decoders will have an opportunity to run. + +During playback the audio thread will be idle (via a Wait() on the +monitor) if the audio queue is empty. Otherwise it constantly pops +audio data off the queue and plays it with a blocking write to the audio +hardware (via AudioStream). + +*/ +#if !defined(MediaDecoderStateMachine_h__) +#define MediaDecoderStateMachine_h__ + +#include "mozilla/Attributes.h" +#include "mozilla/ReentrantMonitor.h" +#include "mozilla/StateMirroring.h" + +#include "nsAutoPtr.h" +#include "nsThreadUtils.h" +#include "MediaDecoder.h" +#include "MediaDecoderReader.h" +#include "MediaDecoderOwner.h" +#include "MediaEventSource.h" +#include "MediaMetadataManager.h" +#include "MediaStatistics.h" +#include "MediaTimer.h" +#include "ImageContainer.h" +#include "SeekJob.h" +#include "SeekTask.h" +#include "MediaDecoderReaderWrapper.h" + +namespace mozilla { + +namespace media { +class MediaSink; +} + +class AudioSegment; +class DecodedStream; +class MediaDecoderReaderWrapper; +class OutputStreamManager; +class TaskQueue; + +extern LazyLogModule gMediaDecoderLog; +extern LazyLogModule gMediaSampleLog; + +enum class MediaEventType : int8_t { + PlaybackStarted, + PlaybackStopped, + PlaybackEnded, + SeekStarted, + Invalidate, + EnterVideoSuspend, + ExitVideoSuspend +}; + +/* + The state machine class. This manages the decoding and seeking in the + MediaDecoderReader on the decode task queue, and A/V sync on the shared + state machine thread, and controls the audio "push" thread. + + All internal state is synchronised via the decoder monitor. State changes + are propagated by scheduling the state machine to run another cycle on the + shared state machine thread. + + See MediaDecoder.h for more details. +*/ +class MediaDecoderStateMachine +{ + NS_INLINE_DECL_THREADSAFE_REFCOUNTING(MediaDecoderStateMachine) + + using TrackSet = MediaDecoderReader::TrackSet; + +public: + typedef MediaDecoderOwner::NextFrameStatus NextFrameStatus; + typedef mozilla::layers::ImageContainer::FrameID FrameID; + MediaDecoderStateMachine(MediaDecoder* aDecoder, + MediaDecoderReader* aReader); + + nsresult Init(MediaDecoder* aDecoder); + + void SetMediaDecoderReaderWrapperCallback(); + void CancelMediaDecoderReaderWrapperCallback(); + + // Enumeration for the valid decoding states + enum State { + DECODER_STATE_DECODING_METADATA, + DECODER_STATE_WAIT_FOR_CDM, + DECODER_STATE_DORMANT, + DECODER_STATE_DECODING_FIRSTFRAME, + DECODER_STATE_DECODING, + DECODER_STATE_SEEKING, + DECODER_STATE_BUFFERING, + DECODER_STATE_COMPLETED, + DECODER_STATE_SHUTDOWN + }; + + void DumpDebugInfo(); + + void AddOutputStream(ProcessedMediaStream* aStream, bool aFinishWhenEnded); + // Remove an output stream added with AddOutputStream. + void RemoveOutputStream(MediaStream* aStream); + + // Seeks to the decoder to aTarget asynchronously. + RefPtr InvokeSeek(SeekTarget aTarget); + + void DispatchSetPlaybackRate(double aPlaybackRate) + { + OwnerThread()->DispatchStateChange(NewRunnableMethod( + this, &MediaDecoderStateMachine::SetPlaybackRate, aPlaybackRate)); + } + + RefPtr BeginShutdown(); + + // Notifies the state machine that should minimize the number of samples + // decoded we preroll, until playback starts. The first time playback starts + // the state machine is free to return to prerolling normally. Note + // "prerolling" in this context refers to when we decode and buffer decoded + // samples in advance of when they're needed for playback. + void DispatchMinimizePrerollUntilPlaybackStarts() + { + RefPtr self = this; + nsCOMPtr r = NS_NewRunnableFunction([self] () -> void + { + MOZ_ASSERT(self->OnTaskQueue()); + self->mMinimizePreroll = true; + + // Make sure that this arrives before playback starts, otherwise this won't + // have the intended effect. + MOZ_DIAGNOSTIC_ASSERT(self->mPlayState == MediaDecoder::PLAY_STATE_LOADING); + }); + OwnerThread()->Dispatch(r.forget()); + } + + // Set the media fragment end time. aEndTime is in microseconds. + void DispatchSetFragmentEndTime(int64_t aEndTime) + { + RefPtr self = this; + nsCOMPtr r = NS_NewRunnableFunction([self, aEndTime] () { + self->mFragmentEndTime = aEndTime; + }); + OwnerThread()->Dispatch(r.forget()); + } + + void DispatchAudioOffloading(bool aAudioOffloading) + { + RefPtr self = this; + nsCOMPtr r = NS_NewRunnableFunction([=] () { + if (self->mAudioOffloading != aAudioOffloading) { + self->mAudioOffloading = aAudioOffloading; + self->ScheduleStateMachine(); + } + }); + OwnerThread()->Dispatch(r.forget()); + } + + // Drop reference to mResource. Only called during shutdown dance. + void BreakCycles() { + MOZ_ASSERT(NS_IsMainThread()); + mResource = nullptr; + } + + TimedMetadataEventSource& TimedMetadataEvent() { + return mMetadataManager.TimedMetadataEvent(); + } + + MediaEventSource& OnMediaNotSeekable() const; + + MediaEventSourceExc, + nsAutoPtr, + MediaDecoderEventVisibility>& + MetadataLoadedEvent() { return mMetadataLoadedEvent; } + + MediaEventSourceExc, + MediaDecoderEventVisibility>& + FirstFrameLoadedEvent() { return mFirstFrameLoadedEvent; } + + MediaEventSource& + OnPlaybackEvent() { return mOnPlaybackEvent; } + MediaEventSource& + OnPlaybackErrorEvent() { return mOnPlaybackErrorEvent; } + + MediaEventSource& + OnDecoderDoctorEvent() { return mOnDecoderDoctorEvent; } + + size_t SizeOfVideoQueue() const; + + size_t SizeOfAudioQueue() const; + +private: + class StateObject; + class DecodeMetadataState; + class WaitForCDMState; + class DormantState; + class DecodingFirstFrameState; + class DecodingState; + class SeekingState; + class BufferingState; + class CompletedState; + class ShutdownState; + + static const char* ToStateStr(State aState); + static const char* ToStr(NextFrameStatus aStatus); + const char* ToStateStr(); + + // Functions used by assertions to ensure we're calling things + // on the appropriate threads. + bool OnTaskQueue() const; + + // Initialization that needs to happen on the task queue. This is the first + // task that gets run on the task queue, and is dispatched from the MDSM + // constructor immediately after the task queue is created. + void InitializationTask(MediaDecoder* aDecoder); + + void SetAudioCaptured(bool aCaptured); + + RefPtr Seek(SeekTarget aTarget); + + RefPtr Shutdown(); + + RefPtr FinishShutdown(); + + // Update the playback position. This can result in a timeupdate event + // and an invalidate of the frame being dispatched asynchronously if + // there is no such event currently queued. + // Only called on the decoder thread. Must be called with + // the decode monitor held. + void UpdatePlaybackPosition(int64_t aTime); + + bool CanPlayThrough(); + + MediaStatistics GetStatistics(); + + bool HasAudio() const { return mInfo.ref().HasAudio(); } + bool HasVideo() const { return mInfo.ref().HasVideo(); } + const MediaInfo& Info() const { return mInfo.ref(); } + + // Returns the state machine task queue. + TaskQueue* OwnerThread() const { return mTaskQueue; } + + // Schedules the shared state machine thread to run the state machine. + void ScheduleStateMachine(); + + // Invokes ScheduleStateMachine to run in |aMicroseconds| microseconds, + // unless it's already scheduled to run earlier, in which case the + // request is discarded. + void ScheduleStateMachineIn(int64_t aMicroseconds); + + bool HaveEnoughDecodedAudio(); + bool HaveEnoughDecodedVideo(); + + // True if shutdown process has begun. + bool IsShutdown() const; + + // Returns true if we're currently playing. The decoder monitor must + // be held. + bool IsPlaying() const; + + // TODO: Those callback function may receive demuxed-only data. + // Need to figure out a suitable API name for this case. + void OnAudioDecoded(MediaData* aAudio); + void OnVideoDecoded(MediaData* aVideo, TimeStamp aDecodeStartTime); + void OnNotDecoded(MediaData::Type aType, const MediaResult& aError); + + // Resets all state related to decoding and playback, emptying all buffers + // and aborting all pending operations on the decode task queue. + void Reset(TrackSet aTracks = TrackSet(TrackInfo::kAudioTrack, + TrackInfo::kVideoTrack)); + // Sets mMediaSeekable to false. + void SetMediaNotSeekable(); + + void OnAudioCallback(AudioCallbackData aData); + void OnVideoCallback(VideoCallbackData aData); + void OnAudioWaitCallback(WaitCallbackData aData); + void OnVideoWaitCallback(WaitCallbackData aData); + +protected: + virtual ~MediaDecoderStateMachine(); + + void BufferedRangeUpdated(); + + void ReaderSuspendedChanged(); + + // Inserts MediaData* samples into their respective MediaQueues. + // aSample must not be null. + + void Push(MediaData* aSample, MediaData::Type aSampleType); + + void OnAudioPopped(const RefPtr& aSample); + void OnVideoPopped(const RefPtr& aSample); + + void AudioAudibleChanged(bool aAudible); + + void VolumeChanged(); + void SetPlaybackRate(double aPlaybackRate); + void PreservesPitchChanged(); + + MediaQueue& AudioQueue() { return mAudioQueue; } + MediaQueue& VideoQueue() { return mVideoQueue; } + + // True if our buffers of decoded audio are not full, and we should + // decode more. + bool NeedToDecodeAudio(); + + // True if our buffers of decoded video are not full, and we should + // decode more. + bool NeedToDecodeVideo(); + + // True if we are low in decoded audio/video data. + // May not be invoked when mReader->UseBufferingHeuristics() is false. + bool HasLowDecodedData(); + + bool HasLowDecodedAudio(); + + bool HasLowDecodedVideo(); + + bool OutOfDecodedAudio(); + + bool OutOfDecodedVideo() + { + MOZ_ASSERT(OnTaskQueue()); + return IsVideoDecoding() && VideoQueue().GetSize() <= 1; + } + + + // Returns true if we're running low on buffered data. + bool HasLowBufferedData(); + + // Returns true if we have less than aUsecs of buffered data available. + bool HasLowBufferedData(int64_t aUsecs); + + void UpdateNextFrameStatus(NextFrameStatus aStatus); + + // Return the current time, either the audio clock if available (if the media + // has audio, and the playback is possible), or a clock for the video. + // Called on the state machine thread. + // If aTimeStamp is non-null, set *aTimeStamp to the TimeStamp corresponding + // to the returned stream time. + int64_t GetClock(TimeStamp* aTimeStamp = nullptr) const; + + void SetStartTime(int64_t aStartTimeUsecs); + + // Update only the state machine's current playback position (and duration, + // if unknown). Does not update the playback position on the decoder or + // media element -- use UpdatePlaybackPosition for that. Called on the state + // machine thread, caller must hold the decoder lock. + void UpdatePlaybackPositionInternal(int64_t aTime); + + // Update playback position and trigger next update by default time period. + // Called on the state machine thread. + void UpdatePlaybackPositionPeriodically(); + + media::MediaSink* CreateAudioSink(); + + // Always create mediasink which contains an AudioSink or StreamSink inside. + already_AddRefed CreateMediaSink(bool aAudioCaptured); + + // Stops the media sink and shut it down. + // The decoder monitor must be held with exactly one lock count. + // Called on the state machine thread. + void StopMediaSink(); + + // Create and start the media sink. + // The decoder monitor must be held with exactly one lock count. + // Called on the state machine thread. + void StartMediaSink(); + + // Notification method invoked when mPlayState changes. + void PlayStateChanged(); + + // Notification method invoked when mIsVisible changes. + void VisibilityChanged(); + + // Sets internal state which causes playback of media to pause. + // The decoder monitor must be held. + void StopPlayback(); + + // If the conditions are right, sets internal state which causes playback + // of media to begin or resume. + // Must be called with the decode monitor held. + void MaybeStartPlayback(); + + // Moves the decoder into the shutdown state, and dispatches an error + // event to the media element. This begins shutting down the decoder. + // The decoder monitor must be held. This is only called on the + // decode thread. + void DecodeError(const MediaResult& aError); + + // Dispatches a LoadedMetadataEvent. + // This is threadsafe and can be called on any thread. + // The decoder monitor must be held. + void EnqueueLoadedMetadataEvent(); + + void EnqueueFirstFrameLoadedEvent(); + + void DispatchAudioDecodeTaskIfNeeded(); + void DispatchVideoDecodeTaskIfNeeded(); + + // Dispatch a task to decode audio if there is not. + void EnsureAudioDecodeTaskQueued(); + + // Dispatch a task to decode video if there is not. + void EnsureVideoDecodeTaskQueued(); + + // Start a task to decode audio. + // The decoder monitor must be held. + void RequestAudioData(); + + // Start a task to decode video. + // The decoder monitor must be held. + void RequestVideoData(); + + // Re-evaluates the state and determines whether we need to dispatch + // events to run the decode, or if not whether we should set the reader + // to idle mode. This is threadsafe, and can be called from any thread. + // The decoder monitor must be held. + void DispatchDecodeTasksIfNeeded(); + + // Returns the "media time". This is the absolute time which the media + // playback has reached. i.e. this returns values in the range + // [mStartTime, mEndTime], and mStartTime will not be 0 if the media does + // not start at 0. Note this is different than the "current playback position", + // which is in the range [0,duration]. + int64_t GetMediaTime() const { + MOZ_ASSERT(OnTaskQueue()); + return mCurrentPosition; + } + + // Returns an upper bound on the number of microseconds of audio that is + // decoded and playable. This is the sum of the number of usecs of audio which + // is decoded and in the reader's audio queue, and the usecs of unplayed audio + // which has been pushed to the audio hardware for playback. Note that after + // calling this, the audio hardware may play some of the audio pushed to + // hardware, so this can only be used as a upper bound. The decoder monitor + // must be held when calling this. Called on the decode thread. + int64_t GetDecodedAudioDuration(); + + void FinishDecodeFirstFrame(); + + // Queries our state to see whether the decode has finished for all streams. + bool CheckIfDecodeComplete(); + + // Performs one "cycle" of the state machine. + void RunStateMachine(); + + bool IsStateMachineScheduled() const; + + // These return true if the respective stream's decode has not yet reached + // the end of stream. + bool IsAudioDecoding(); + bool IsVideoDecoding(); + +private: + // Resolved by the MediaSink to signal that all audio/video outstanding + // work is complete and identify which part(a/v) of the sink is shutting down. + void OnMediaSinkAudioComplete(); + void OnMediaSinkVideoComplete(); + + // Rejected by the MediaSink to signal errors for audio/video. + void OnMediaSinkAudioError(nsresult aResult); + void OnMediaSinkVideoError(); + + // Return true if the video decoder's decode speed can not catch up the + // play time. + bool NeedToSkipToNextKeyframe(); + + void* const mDecoderID; + const RefPtr mFrameStats; + const RefPtr mVideoFrameContainer; + const dom::AudioChannel mAudioChannel; + + // Task queue for running the state machine. + RefPtr mTaskQueue; + + // State-watching manager. + WatchManager mWatchManager; + + // True if we've dispatched a task to run the state machine but the task has + // yet to run. + bool mDispatchedStateMachine; + + // Used to dispatch another round schedule with specific target time. + DelayedScheduler mDelayedScheduler; + + // Queue of audio frames. This queue is threadsafe, and is accessed from + // the audio, decoder, state machine, and main threads. + MediaQueue mAudioQueue; + // Queue of video frames. This queue is threadsafe, and is accessed from + // the decoder, state machine, and main threads. + MediaQueue mVideoQueue; + + State mState = DECODER_STATE_DECODING_METADATA; + + UniquePtr mStateObj; + + media::TimeUnit Duration() const { MOZ_ASSERT(OnTaskQueue()); return mDuration.Ref().ref(); } + + // Recomputes the canonical duration from various sources. + void RecomputeDuration(); + + + // FrameID which increments every time a frame is pushed to our queue. + FrameID mCurrentFrameID; + + // The highest timestamp that our position has reached. Monotonically + // increasing. + Watchable mObservedDuration; + + // Returns true if we're logically playing, that is, if the Play() has + // been called and Pause() has not or we have not yet reached the end + // of media. This is irrespective of the seeking state; if the owner + // calls Play() and then Seek(), we still count as logically playing. + // The decoder monitor must be held. + bool IsLogicallyPlaying() + { + MOZ_ASSERT(OnTaskQueue()); + return mPlayState == MediaDecoder::PLAY_STATE_PLAYING || + mNextPlayState == MediaDecoder::PLAY_STATE_PLAYING; + } + + // Media Fragment end time in microseconds. Access controlled by decoder monitor. + int64_t mFragmentEndTime; + + // The media sink resource. Used on the state machine thread. + RefPtr mMediaSink; + + const RefPtr mReader; + + // The end time of the last audio frame that's been pushed onto the media sink + // in microseconds. This will approximately be the end time + // of the audio stream, unless another frame is pushed to the hardware. + int64_t AudioEndTime() const; + + // The end time of the last rendered video frame that's been sent to + // compositor. + int64_t VideoEndTime() const; + + // The end time of the last decoded audio frame. This signifies the end of + // decoded audio data. Used to check if we are low in decoded data. + int64_t mDecodedAudioEndTime; + + // The end time of the last decoded video frame. Used to check if we are low + // on decoded video data. + int64_t mDecodedVideoEndTime; + + // Playback rate. 1.0 : normal speed, 0.5 : two times slower. + double mPlaybackRate; + + // If we've got more than this number of decoded video frames waiting in + // the video queue, we will not decode any more video frames until some have + // been consumed by the play state machine thread. + // Must hold monitor. + uint32_t GetAmpleVideoFrames() const; + + // Low audio threshold. If we've decoded less than this much audio we + // consider our audio decode "behind", and we may skip video decoding + // in order to allow our audio decoding to catch up. We favour audio + // decoding over video. We increase this threshold if we're slow to + // decode video frames, in order to reduce the chance of audio underruns. + // Note that we don't ever reset this threshold, it only ever grows as + // we detect that the decode can't keep up with rendering. + int64_t mLowAudioThresholdUsecs; + + // Our "ample" audio threshold. Once we've this much audio decoded, we + // pause decoding. If we increase mLowAudioThresholdUsecs, we'll also + // increase this too appropriately (we don't want mLowAudioThresholdUsecs + // to be greater than ampleAudioThreshold, else we'd stop decoding!). + // Note that we don't ever reset this threshold, it only ever grows as + // we detect that the decode can't keep up with rendering. + int64_t mAmpleAudioThresholdUsecs; + + // At the start of decoding we want to "preroll" the decode until we've + // got a few frames decoded before we consider whether decode is falling + // behind. Otherwise our "we're falling behind" logic will trigger + // unnecessarily if we start playing as soon as the first sample is + // decoded. These two fields store how many video frames and audio + // samples we must consume before are considered to be finished prerolling. + uint32_t AudioPrerollUsecs() const + { + MOZ_ASSERT(OnTaskQueue()); + return mAmpleAudioThresholdUsecs / 2; + } + + uint32_t VideoPrerollFrames() const + { + MOZ_ASSERT(OnTaskQueue()); + return GetAmpleVideoFrames() / 2; + } + + // Only one of a given pair of ({Audio,Video}DataPromise, WaitForDataPromise) + // should exist at any given moment. + + MediaEventListener mAudioCallback; + MediaEventListener mVideoCallback; + MediaEventListener mAudioWaitCallback; + MediaEventListener mVideoWaitCallback; + + const char* AudioRequestStatus() const; + const char* VideoRequestStatus() const; + + void OnSuspendTimerResolved(); + void OnSuspendTimerRejected(); + + // True if we shouldn't play our audio (but still write it to any capturing + // streams). When this is true, the audio thread will never start again after + // it has stopped. + bool mAudioCaptured; + + // True if all audio frames are already rendered. + bool mAudioCompleted = false; + + // True if all video frames are already rendered. + bool mVideoCompleted = false; + + // Flag whether we notify metadata before decoding the first frame or after. + // + // Note that the odd semantics here are designed to replicate the current + // behavior where we notify the decoder each time we come out of dormant, but + // send suppressed event visibility for those cases. This code can probably be + // simplified. + bool mNotifyMetadataBeforeFirstFrame; + + // True if we should not decode/preroll unnecessary samples, unless we're + // played. "Prerolling" in this context refers to when we decode and + // buffer decoded samples in advance of when they're needed for playback. + // This flag is set for preload=metadata media, and means we won't + // decode more than the first video frame and first block of audio samples + // for that media when we startup, or after a seek. When Play() is called, + // we reset this flag, as we assume the user is playing the media, so + // prerolling is appropriate then. This flag is used to reduce the overhead + // of prerolling samples for media elements that may not play, both + // memory and CPU overhead. + bool mMinimizePreroll; + + // Stores presentation info required for playback. + Maybe mInfo; + + nsAutoPtr mMetadataTags; + + mozilla::MediaMetadataManager mMetadataManager; + + // Track our request to update the buffered ranges + MozPromiseRequestHolder mBufferedUpdateRequest; + + // True if we are back from DECODER_STATE_DORMANT state and + // LoadedMetadataEvent was already sent. + bool mSentLoadedMetadataEvent; + + // True if we've decoded first frames (thus having the start time) and + // notified the FirstFrameLoaded event. Note we can't initiate seek until the + // start time is known which happens when the first frames are decoded or we + // are playing an MSE stream (the start time is always assumed 0). + bool mSentFirstFrameLoadedEvent; + + // True if video decoding is suspended. + bool mVideoDecodeSuspended; + + // True if the media is seekable (i.e. supports random access). + bool mMediaSeekable = true; + + // True if the media is seekable only in buffered ranges. + bool mMediaSeekableOnlyInBufferedRanges = false; + + // Track enabling video decode suspension via timer + DelayedScheduler mVideoDecodeSuspendTimer; + + // Data about MediaStreams that are being fed by the decoder. + const RefPtr mOutputStreamManager; + + // Media data resource from the decoder. + RefPtr mResource; + + // Track the complete & error for audio/video separately + MozPromiseRequestHolder mMediaSinkAudioPromise; + MozPromiseRequestHolder mMediaSinkVideoPromise; + + MediaEventListener mAudioQueueListener; + MediaEventListener mVideoQueueListener; + MediaEventListener mAudibleListener; + MediaEventListener mOnMediaNotSeekable; + + MediaEventProducerExc, + nsAutoPtr, + MediaDecoderEventVisibility> mMetadataLoadedEvent; + MediaEventProducerExc, + MediaDecoderEventVisibility> mFirstFrameLoadedEvent; + + MediaEventProducer mOnPlaybackEvent; + MediaEventProducer mOnPlaybackErrorEvent; + + MediaEventProducer mOnDecoderDoctorEvent; + + // True if audio is offloading. + // Playback will not start when audio is offloading. + bool mAudioOffloading; + + void OnCDMProxyReady(RefPtr aProxy); + void OnCDMProxyNotReady(); + RefPtr mCDMProxy; + MozPromiseRequestHolder mCDMProxyPromise; + +private: + // The buffered range. Mirrored from the decoder thread. + Mirror mBuffered; + + // The duration according to the demuxer's current estimate, mirrored from the main thread. + Mirror mEstimatedDuration; + + // The duration explicitly set by JS, mirrored from the main thread. + Mirror> mExplicitDuration; + + // The current play state and next play state, mirrored from the main thread. + Mirror mPlayState; + Mirror mNextPlayState; + + // Volume of playback. 0.0 = muted. 1.0 = full volume. + Mirror mVolume; + + // Pitch preservation for the playback rate. + Mirror mPreservesPitch; + + // True if the media is same-origin with the element. Data can only be + // passed to MediaStreams when this is true. + Mirror mSameOriginMedia; + + // An identifier for the principal of the media. Used to track when + // main-thread induced principal changes get reflected on MSG thread. + Mirror mMediaPrincipalHandle; + + // Estimate of the current playback rate (bytes/second). + Mirror mPlaybackBytesPerSecond; + + // True if mPlaybackBytesPerSecond is a reliable estimate. + Mirror mPlaybackRateReliable; + + // Current decoding position in the stream. + Mirror mDecoderPosition; + + // IsVisible, mirrored from the media decoder. + Mirror mIsVisible; + + // Duration of the media. This is guaranteed to be non-null after we finish + // decoding the first frame. + Canonical mDuration; + + // Whether we're currently in or transitioning to shutdown state. + Canonical mIsShutdown; + + // The status of our next frame. Mirrored on the main thread and used to + // compute ready state. + Canonical mNextFrameStatus; + + // The time of the current frame in microseconds, corresponding to the "current + // playback position" in HTML5. This is referenced from 0, which is the initial + // playback position. + Canonical mCurrentPosition; + + // Current playback position in the stream in bytes. + Canonical mPlaybackOffset; + + // Used to distinguish whether the audio is producing sound. + Canonical mIsAudioDataAudible; + +public: + AbstractCanonical* CanonicalBuffered() const; + + AbstractCanonical* CanonicalDuration() { + return &mDuration; + } + AbstractCanonical* CanonicalIsShutdown() { + return &mIsShutdown; + } + AbstractCanonical* CanonicalNextFrameStatus() { + return &mNextFrameStatus; + } + AbstractCanonical* CanonicalCurrentPosition() { + return &mCurrentPosition; + } + AbstractCanonical* CanonicalPlaybackOffset() { + return &mPlaybackOffset; + } + AbstractCanonical* CanonicalIsAudioDataAudible() { + return &mIsAudioDataAudible; + } +}; + +} // namespace mozilla + +#endif -- cgit v1.2.3