diff options
Diffstat (limited to 'tools/profiler/lul/LulDwarf.cpp')
-rw-r--r-- | tools/profiler/lul/LulDwarf.cpp | 2180 |
1 files changed, 2180 insertions, 0 deletions
diff --git a/tools/profiler/lul/LulDwarf.cpp b/tools/profiler/lul/LulDwarf.cpp new file mode 100644 index 000000000..1bdbdabb6 --- /dev/null +++ b/tools/profiler/lul/LulDwarf.cpp @@ -0,0 +1,2180 @@ +/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* vim: set ts=8 sts=2 et sw=2 tw=80: */ + +// Copyright (c) 2010 Google Inc. All Rights Reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +// CFI reader author: Jim Blandy <jimb@mozilla.com> <jimb@red-bean.com> +// Original author: Jim Blandy <jimb@mozilla.com> <jimb@red-bean.com> + +// Implementation of dwarf2reader::LineInfo, dwarf2reader::CompilationUnit, +// and dwarf2reader::CallFrameInfo. See dwarf2reader.h for details. + +// This file is derived from the following files in +// toolkit/crashreporter/google-breakpad: +// src/common/dwarf/bytereader.cc +// src/common/dwarf/dwarf2reader.cc +// src/common/dwarf_cfi_to_module.cc + +#include <stdint.h> +#include <stdio.h> +#include <string.h> +#include <stdlib.h> + +#include <map> +#include <stack> +#include <string> + +#include "mozilla/Assertions.h" +#include "mozilla/Sprintf.h" + +#include "LulCommonExt.h" +#include "LulDwarfInt.h" + + +// Set this to 1 for verbose logging +#define DEBUG_DWARF 0 + + +namespace lul { + +using std::string; + +ByteReader::ByteReader(enum Endianness endian) + :offset_reader_(NULL), address_reader_(NULL), endian_(endian), + address_size_(0), offset_size_(0), + have_section_base_(), have_text_base_(), have_data_base_(), + have_function_base_() { } + +ByteReader::~ByteReader() { } + +void ByteReader::SetOffsetSize(uint8 size) { + offset_size_ = size; + MOZ_ASSERT(size == 4 || size == 8); + if (size == 4) { + this->offset_reader_ = &ByteReader::ReadFourBytes; + } else { + this->offset_reader_ = &ByteReader::ReadEightBytes; + } +} + +void ByteReader::SetAddressSize(uint8 size) { + address_size_ = size; + MOZ_ASSERT(size == 4 || size == 8); + if (size == 4) { + this->address_reader_ = &ByteReader::ReadFourBytes; + } else { + this->address_reader_ = &ByteReader::ReadEightBytes; + } +} + +uint64 ByteReader::ReadInitialLength(const char* start, size_t* len) { + const uint64 initial_length = ReadFourBytes(start); + start += 4; + + // In DWARF2/3, if the initial length is all 1 bits, then the offset + // size is 8 and we need to read the next 8 bytes for the real length. + if (initial_length == 0xffffffff) { + SetOffsetSize(8); + *len = 12; + return ReadOffset(start); + } else { + SetOffsetSize(4); + *len = 4; + } + return initial_length; +} + +bool ByteReader::ValidEncoding(DwarfPointerEncoding encoding) const { + if (encoding == DW_EH_PE_omit) return true; + if (encoding == DW_EH_PE_aligned) return true; + if ((encoding & 0x7) > DW_EH_PE_udata8) + return false; + if ((encoding & 0x70) > DW_EH_PE_funcrel) + return false; + return true; +} + +bool ByteReader::UsableEncoding(DwarfPointerEncoding encoding) const { + switch (encoding & 0x70) { + case DW_EH_PE_absptr: return true; + case DW_EH_PE_pcrel: return have_section_base_; + case DW_EH_PE_textrel: return have_text_base_; + case DW_EH_PE_datarel: return have_data_base_; + case DW_EH_PE_funcrel: return have_function_base_; + default: return false; + } +} + +uint64 ByteReader::ReadEncodedPointer(const char *buffer, + DwarfPointerEncoding encoding, + size_t *len) const { + // UsableEncoding doesn't approve of DW_EH_PE_omit, so we shouldn't + // see it here. + MOZ_ASSERT(encoding != DW_EH_PE_omit); + + // The Linux Standards Base 4.0 does not make this clear, but the + // GNU tools (gcc/unwind-pe.h; readelf/dwarf.c; gdb/dwarf2-frame.c) + // agree that aligned pointers are always absolute, machine-sized, + // machine-signed pointers. + if (encoding == DW_EH_PE_aligned) { + MOZ_ASSERT(have_section_base_); + + // We don't need to align BUFFER in *our* address space. Rather, we + // need to find the next position in our buffer that would be aligned + // when the .eh_frame section the buffer contains is loaded into the + // program's memory. So align assuming that buffer_base_ gets loaded at + // address section_base_, where section_base_ itself may or may not be + // aligned. + + // First, find the offset to START from the closest prior aligned + // address. + uint64 skew = section_base_ & (AddressSize() - 1); + // Now find the offset from that aligned address to buffer. + uint64 offset = skew + (buffer - buffer_base_); + // Round up to the next boundary. + uint64 aligned = (offset + AddressSize() - 1) & -AddressSize(); + // Convert back to a pointer. + const char *aligned_buffer = buffer_base_ + (aligned - skew); + // Finally, store the length and actually fetch the pointer. + *len = aligned_buffer - buffer + AddressSize(); + return ReadAddress(aligned_buffer); + } + + // Extract the value first, ignoring whether it's a pointer or an + // offset relative to some base. + uint64 offset; + switch (encoding & 0x0f) { + case DW_EH_PE_absptr: + // DW_EH_PE_absptr is weird, as it is used as a meaningful value for + // both the high and low nybble of encoding bytes. When it appears in + // the high nybble, it means that the pointer is absolute, not an + // offset from some base address. When it appears in the low nybble, + // as here, it means that the pointer is stored as a normal + // machine-sized and machine-signed address. A low nybble of + // DW_EH_PE_absptr does not imply that the pointer is absolute; it is + // correct for us to treat the value as an offset from a base address + // if the upper nybble is not DW_EH_PE_absptr. + offset = ReadAddress(buffer); + *len = AddressSize(); + break; + + case DW_EH_PE_uleb128: + offset = ReadUnsignedLEB128(buffer, len); + break; + + case DW_EH_PE_udata2: + offset = ReadTwoBytes(buffer); + *len = 2; + break; + + case DW_EH_PE_udata4: + offset = ReadFourBytes(buffer); + *len = 4; + break; + + case DW_EH_PE_udata8: + offset = ReadEightBytes(buffer); + *len = 8; + break; + + case DW_EH_PE_sleb128: + offset = ReadSignedLEB128(buffer, len); + break; + + case DW_EH_PE_sdata2: + offset = ReadTwoBytes(buffer); + // Sign-extend from 16 bits. + offset = (offset ^ 0x8000) - 0x8000; + *len = 2; + break; + + case DW_EH_PE_sdata4: + offset = ReadFourBytes(buffer); + // Sign-extend from 32 bits. + offset = (offset ^ 0x80000000ULL) - 0x80000000ULL; + *len = 4; + break; + + case DW_EH_PE_sdata8: + // No need to sign-extend; this is the full width of our type. + offset = ReadEightBytes(buffer); + *len = 8; + break; + + default: + abort(); + } + + // Find the appropriate base address. + uint64 base; + switch (encoding & 0x70) { + case DW_EH_PE_absptr: + base = 0; + break; + + case DW_EH_PE_pcrel: + MOZ_ASSERT(have_section_base_); + base = section_base_ + (buffer - buffer_base_); + break; + + case DW_EH_PE_textrel: + MOZ_ASSERT(have_text_base_); + base = text_base_; + break; + + case DW_EH_PE_datarel: + MOZ_ASSERT(have_data_base_); + base = data_base_; + break; + + case DW_EH_PE_funcrel: + MOZ_ASSERT(have_function_base_); + base = function_base_; + break; + + default: + abort(); + } + + uint64 pointer = base + offset; + + // Remove inappropriate upper bits. + if (AddressSize() == 4) + pointer = pointer & 0xffffffff; + else + MOZ_ASSERT(AddressSize() == sizeof(uint64)); + + return pointer; +} + + +// A DWARF rule for recovering the address or value of a register, or +// computing the canonical frame address. There is one subclass of this for +// each '*Rule' member function in CallFrameInfo::Handler. +// +// It's annoying that we have to handle Rules using pointers (because +// the concrete instances can have an arbitrary size). They're small, +// so it would be much nicer if we could just handle them by value +// instead of fretting about ownership and destruction. +// +// It seems like all these could simply be instances of std::tr1::bind, +// except that we need instances to be EqualityComparable, too. +// +// This could logically be nested within State, but then the qualified names +// get horrendous. +class CallFrameInfo::Rule { + public: + virtual ~Rule() { } + + // Tell HANDLER that, at ADDRESS in the program, REGISTER can be + // recovered using this rule. If REGISTER is kCFARegister, then this rule + // describes how to compute the canonical frame address. Return what the + // HANDLER member function returned. + virtual bool Handle(Handler *handler, uint64 address, int register) const = 0; + + // Equality on rules. We use these to decide which rules we need + // to report after a DW_CFA_restore_state instruction. + virtual bool operator==(const Rule &rhs) const = 0; + + bool operator!=(const Rule &rhs) const { return ! (*this == rhs); } + + // Return a pointer to a copy of this rule. + virtual Rule *Copy() const = 0; + + // If this is a base+offset rule, change its base register to REG. + // Otherwise, do nothing. (Ugly, but required for DW_CFA_def_cfa_register.) + virtual void SetBaseRegister(unsigned reg) { } + + // If this is a base+offset rule, change its offset to OFFSET. Otherwise, + // do nothing. (Ugly, but required for DW_CFA_def_cfa_offset.) + virtual void SetOffset(long long offset) { } + + // A RTTI workaround, to make it possible to implement equality + // comparisons on classes derived from this one. + enum CFIRTag { + CFIR_UNDEFINED_RULE, + CFIR_SAME_VALUE_RULE, + CFIR_OFFSET_RULE, + CFIR_VAL_OFFSET_RULE, + CFIR_REGISTER_RULE, + CFIR_EXPRESSION_RULE, + CFIR_VAL_EXPRESSION_RULE + }; + + // Produce the tag that identifies the child class of this object. + virtual CFIRTag getTag() const = 0; +}; + +// Rule: the value the register had in the caller cannot be recovered. +class CallFrameInfo::UndefinedRule: public CallFrameInfo::Rule { + public: + UndefinedRule() { } + ~UndefinedRule() { } + CFIRTag getTag() const { return CFIR_UNDEFINED_RULE; } + bool Handle(Handler *handler, uint64 address, int reg) const { + return handler->UndefinedRule(address, reg); + } + bool operator==(const Rule &rhs) const { + if (rhs.getTag() != CFIR_UNDEFINED_RULE) return false; + return true; + } + Rule *Copy() const { return new UndefinedRule(*this); } +}; + +// Rule: the register's value is the same as that it had in the caller. +class CallFrameInfo::SameValueRule: public CallFrameInfo::Rule { + public: + SameValueRule() { } + ~SameValueRule() { } + CFIRTag getTag() const { return CFIR_SAME_VALUE_RULE; } + bool Handle(Handler *handler, uint64 address, int reg) const { + return handler->SameValueRule(address, reg); + } + bool operator==(const Rule &rhs) const { + if (rhs.getTag() != CFIR_SAME_VALUE_RULE) return false; + return true; + } + Rule *Copy() const { return new SameValueRule(*this); } +}; + +// Rule: the register is saved at OFFSET from BASE_REGISTER. BASE_REGISTER +// may be CallFrameInfo::Handler::kCFARegister. +class CallFrameInfo::OffsetRule: public CallFrameInfo::Rule { + public: + OffsetRule(int base_register, long offset) + : base_register_(base_register), offset_(offset) { } + ~OffsetRule() { } + CFIRTag getTag() const { return CFIR_OFFSET_RULE; } + bool Handle(Handler *handler, uint64 address, int reg) const { + return handler->OffsetRule(address, reg, base_register_, offset_); + } + bool operator==(const Rule &rhs) const { + if (rhs.getTag() != CFIR_OFFSET_RULE) return false; + const OffsetRule *our_rhs = static_cast<const OffsetRule *>(&rhs); + return (base_register_ == our_rhs->base_register_ && + offset_ == our_rhs->offset_); + } + Rule *Copy() const { return new OffsetRule(*this); } + // We don't actually need SetBaseRegister or SetOffset here, since they + // are only ever applied to CFA rules, for DW_CFA_def_cfa_offset, and it + // doesn't make sense to use OffsetRule for computing the CFA: it + // computes the address at which a register is saved, not a value. + private: + int base_register_; + long offset_; +}; + +// Rule: the value the register had in the caller is the value of +// BASE_REGISTER plus offset. BASE_REGISTER may be +// CallFrameInfo::Handler::kCFARegister. +class CallFrameInfo::ValOffsetRule: public CallFrameInfo::Rule { + public: + ValOffsetRule(int base_register, long offset) + : base_register_(base_register), offset_(offset) { } + ~ValOffsetRule() { } + CFIRTag getTag() const { return CFIR_VAL_OFFSET_RULE; } + bool Handle(Handler *handler, uint64 address, int reg) const { + return handler->ValOffsetRule(address, reg, base_register_, offset_); + } + bool operator==(const Rule &rhs) const { + if (rhs.getTag() != CFIR_VAL_OFFSET_RULE) return false; + const ValOffsetRule *our_rhs = static_cast<const ValOffsetRule *>(&rhs); + return (base_register_ == our_rhs->base_register_ && + offset_ == our_rhs->offset_); + } + Rule *Copy() const { return new ValOffsetRule(*this); } + void SetBaseRegister(unsigned reg) { base_register_ = reg; } + void SetOffset(long long offset) { offset_ = offset; } + private: + int base_register_; + long offset_; +}; + +// Rule: the register has been saved in another register REGISTER_NUMBER_. +class CallFrameInfo::RegisterRule: public CallFrameInfo::Rule { + public: + explicit RegisterRule(int register_number) + : register_number_(register_number) { } + ~RegisterRule() { } + CFIRTag getTag() const { return CFIR_REGISTER_RULE; } + bool Handle(Handler *handler, uint64 address, int reg) const { + return handler->RegisterRule(address, reg, register_number_); + } + bool operator==(const Rule &rhs) const { + if (rhs.getTag() != CFIR_REGISTER_RULE) return false; + const RegisterRule *our_rhs = static_cast<const RegisterRule *>(&rhs); + return (register_number_ == our_rhs->register_number_); + } + Rule *Copy() const { return new RegisterRule(*this); } + private: + int register_number_; +}; + +// Rule: EXPRESSION evaluates to the address at which the register is saved. +class CallFrameInfo::ExpressionRule: public CallFrameInfo::Rule { + public: + explicit ExpressionRule(const string &expression) + : expression_(expression) { } + ~ExpressionRule() { } + CFIRTag getTag() const { return CFIR_EXPRESSION_RULE; } + bool Handle(Handler *handler, uint64 address, int reg) const { + return handler->ExpressionRule(address, reg, expression_); + } + bool operator==(const Rule &rhs) const { + if (rhs.getTag() != CFIR_EXPRESSION_RULE) return false; + const ExpressionRule *our_rhs = static_cast<const ExpressionRule *>(&rhs); + return (expression_ == our_rhs->expression_); + } + Rule *Copy() const { return new ExpressionRule(*this); } + private: + string expression_; +}; + +// Rule: EXPRESSION evaluates to the previous value of the register. +class CallFrameInfo::ValExpressionRule: public CallFrameInfo::Rule { + public: + explicit ValExpressionRule(const string &expression) + : expression_(expression) { } + ~ValExpressionRule() { } + CFIRTag getTag() const { return CFIR_VAL_EXPRESSION_RULE; } + bool Handle(Handler *handler, uint64 address, int reg) const { + return handler->ValExpressionRule(address, reg, expression_); + } + bool operator==(const Rule &rhs) const { + if (rhs.getTag() != CFIR_VAL_EXPRESSION_RULE) return false; + const ValExpressionRule *our_rhs = + static_cast<const ValExpressionRule *>(&rhs); + return (expression_ == our_rhs->expression_); + } + Rule *Copy() const { return new ValExpressionRule(*this); } + private: + string expression_; +}; + +// A map from register numbers to rules. +class CallFrameInfo::RuleMap { + public: + RuleMap() : cfa_rule_(NULL) { } + RuleMap(const RuleMap &rhs) : cfa_rule_(NULL) { *this = rhs; } + ~RuleMap() { Clear(); } + + RuleMap &operator=(const RuleMap &rhs); + + // Set the rule for computing the CFA to RULE. Take ownership of RULE. + void SetCFARule(Rule *rule) { delete cfa_rule_; cfa_rule_ = rule; } + + // Return the current CFA rule. Unlike RegisterRule, this RuleMap retains + // ownership of the rule. We use this for DW_CFA_def_cfa_offset and + // DW_CFA_def_cfa_register, and for detecting references to the CFA before + // a rule for it has been established. + Rule *CFARule() const { return cfa_rule_; } + + // Return the rule for REG, or NULL if there is none. The caller takes + // ownership of the result. + Rule *RegisterRule(int reg) const; + + // Set the rule for computing REG to RULE. Take ownership of RULE. + void SetRegisterRule(int reg, Rule *rule); + + // Make all the appropriate calls to HANDLER as if we were changing from + // this RuleMap to NEW_RULES at ADDRESS. We use this to implement + // DW_CFA_restore_state, where lots of rules can change simultaneously. + // Return true if all handlers returned true; otherwise, return false. + bool HandleTransitionTo(Handler *handler, uint64 address, + const RuleMap &new_rules) const; + + private: + // A map from register numbers to Rules. + typedef std::map<int, Rule *> RuleByNumber; + + // Remove all register rules and clear cfa_rule_. + void Clear(); + + // The rule for computing the canonical frame address. This RuleMap owns + // this rule. + Rule *cfa_rule_; + + // A map from register numbers to postfix expressions to recover + // their values. This RuleMap owns the Rules the map refers to. + RuleByNumber registers_; +}; + +CallFrameInfo::RuleMap &CallFrameInfo::RuleMap::operator=(const RuleMap &rhs) { + Clear(); + // Since each map owns the rules it refers to, assignment must copy them. + if (rhs.cfa_rule_) cfa_rule_ = rhs.cfa_rule_->Copy(); + for (RuleByNumber::const_iterator it = rhs.registers_.begin(); + it != rhs.registers_.end(); it++) + registers_[it->first] = it->second->Copy(); + return *this; +} + +CallFrameInfo::Rule *CallFrameInfo::RuleMap::RegisterRule(int reg) const { + MOZ_ASSERT(reg != Handler::kCFARegister); + RuleByNumber::const_iterator it = registers_.find(reg); + if (it != registers_.end()) + return it->second->Copy(); + else + return NULL; +} + +void CallFrameInfo::RuleMap::SetRegisterRule(int reg, Rule *rule) { + MOZ_ASSERT(reg != Handler::kCFARegister); + MOZ_ASSERT(rule); + Rule **slot = ®isters_[reg]; + delete *slot; + *slot = rule; +} + +bool CallFrameInfo::RuleMap::HandleTransitionTo( + Handler *handler, + uint64 address, + const RuleMap &new_rules) const { + // Transition from cfa_rule_ to new_rules.cfa_rule_. + if (cfa_rule_ && new_rules.cfa_rule_) { + if (*cfa_rule_ != *new_rules.cfa_rule_ && + !new_rules.cfa_rule_->Handle(handler, address, Handler::kCFARegister)) + return false; + } else if (cfa_rule_) { + // this RuleMap has a CFA rule but new_rules doesn't. + // CallFrameInfo::Handler has no way to handle this --- and shouldn't; + // it's garbage input. The instruction interpreter should have + // detected this and warned, so take no action here. + } else if (new_rules.cfa_rule_) { + // This shouldn't be possible: NEW_RULES is some prior state, and + // there's no way to remove entries. + MOZ_ASSERT(0); + } else { + // Both CFA rules are empty. No action needed. + } + + // Traverse the two maps in order by register number, and report + // whatever differences we find. + RuleByNumber::const_iterator old_it = registers_.begin(); + RuleByNumber::const_iterator new_it = new_rules.registers_.begin(); + while (old_it != registers_.end() && new_it != new_rules.registers_.end()) { + if (old_it->first < new_it->first) { + // This RuleMap has an entry for old_it->first, but NEW_RULES + // doesn't. + // + // This isn't really the right thing to do, but since CFI generally + // only mentions callee-saves registers, and GCC's convention for + // callee-saves registers is that they are unchanged, it's a good + // approximation. + if (!handler->SameValueRule(address, old_it->first)) + return false; + old_it++; + } else if (old_it->first > new_it->first) { + // NEW_RULES has entry for new_it->first, but this RuleMap + // doesn't. This shouldn't be possible: NEW_RULES is some prior + // state, and there's no way to remove entries. + MOZ_ASSERT(0); + } else { + // Both maps have an entry for this register. Report the new + // rule if it is different. + if (*old_it->second != *new_it->second && + !new_it->second->Handle(handler, address, new_it->first)) + return false; + new_it++, old_it++; + } + } + // Finish off entries from this RuleMap with no counterparts in new_rules. + while (old_it != registers_.end()) { + if (!handler->SameValueRule(address, old_it->first)) + return false; + old_it++; + } + // Since we only make transitions from a rule set to some previously + // saved rule set, and we can only add rules to the map, NEW_RULES + // must have fewer rules than *this. + MOZ_ASSERT(new_it == new_rules.registers_.end()); + + return true; +} + +// Remove all register rules and clear cfa_rule_. +void CallFrameInfo::RuleMap::Clear() { + delete cfa_rule_; + cfa_rule_ = NULL; + for (RuleByNumber::iterator it = registers_.begin(); + it != registers_.end(); it++) + delete it->second; + registers_.clear(); +} + +// The state of the call frame information interpreter as it processes +// instructions from a CIE and FDE. +class CallFrameInfo::State { + public: + // Create a call frame information interpreter state with the given + // reporter, reader, handler, and initial call frame info address. + State(ByteReader *reader, Handler *handler, Reporter *reporter, + uint64 address) + : reader_(reader), handler_(handler), reporter_(reporter), + address_(address), entry_(NULL), cursor_(NULL), + saved_rules_(NULL) { } + + ~State() { + if (saved_rules_) + delete saved_rules_; + } + + // Interpret instructions from CIE, save the resulting rule set for + // DW_CFA_restore instructions, and return true. On error, report + // the problem to reporter_ and return false. + bool InterpretCIE(const CIE &cie); + + // Interpret instructions from FDE, and return true. On error, + // report the problem to reporter_ and return false. + bool InterpretFDE(const FDE &fde); + + private: + // The operands of a CFI instruction, for ParseOperands. + struct Operands { + unsigned register_number; // A register number. + uint64 offset; // An offset or address. + long signed_offset; // A signed offset. + string expression; // A DWARF expression. + }; + + // Parse CFI instruction operands from STATE's instruction stream as + // described by FORMAT. On success, populate OPERANDS with the + // results, and return true. On failure, report the problem and + // return false. + // + // Each character of FORMAT should be one of the following: + // + // 'r' unsigned LEB128 register number (OPERANDS->register_number) + // 'o' unsigned LEB128 offset (OPERANDS->offset) + // 's' signed LEB128 offset (OPERANDS->signed_offset) + // 'a' machine-size address (OPERANDS->offset) + // (If the CIE has a 'z' augmentation string, 'a' uses the + // encoding specified by the 'R' argument.) + // '1' a one-byte offset (OPERANDS->offset) + // '2' a two-byte offset (OPERANDS->offset) + // '4' a four-byte offset (OPERANDS->offset) + // '8' an eight-byte offset (OPERANDS->offset) + // 'e' a DW_FORM_block holding a (OPERANDS->expression) + // DWARF expression + bool ParseOperands(const char *format, Operands *operands); + + // Interpret one CFI instruction from STATE's instruction stream, update + // STATE, report any rule changes to handler_, and return true. On + // failure, report the problem and return false. + bool DoInstruction(); + + // The following Do* member functions are subroutines of DoInstruction, + // factoring out the actual work of operations that have several + // different encodings. + + // Set the CFA rule to be the value of BASE_REGISTER plus OFFSET, and + // return true. On failure, report and return false. (Used for + // DW_CFA_def_cfa and DW_CFA_def_cfa_sf.) + bool DoDefCFA(unsigned base_register, long offset); + + // Change the offset of the CFA rule to OFFSET, and return true. On + // failure, report and return false. (Subroutine for + // DW_CFA_def_cfa_offset and DW_CFA_def_cfa_offset_sf.) + bool DoDefCFAOffset(long offset); + + // Specify that REG can be recovered using RULE, and return true. On + // failure, report and return false. + bool DoRule(unsigned reg, Rule *rule); + + // Specify that REG can be found at OFFSET from the CFA, and return true. + // On failure, report and return false. (Subroutine for DW_CFA_offset, + // DW_CFA_offset_extended, and DW_CFA_offset_extended_sf.) + bool DoOffset(unsigned reg, long offset); + + // Specify that the caller's value for REG is the CFA plus OFFSET, + // and return true. On failure, report and return false. (Subroutine + // for DW_CFA_val_offset and DW_CFA_val_offset_sf.) + bool DoValOffset(unsigned reg, long offset); + + // Restore REG to the rule established in the CIE, and return true. On + // failure, report and return false. (Subroutine for DW_CFA_restore and + // DW_CFA_restore_extended.) + bool DoRestore(unsigned reg); + + // Return the section offset of the instruction at cursor. For use + // in error messages. + uint64 CursorOffset() { return entry_->offset + (cursor_ - entry_->start); } + + // Report that entry_ is incomplete, and return false. For brevity. + bool ReportIncomplete() { + reporter_->Incomplete(entry_->offset, entry_->kind); + return false; + } + + // For reading multi-byte values with the appropriate endianness. + ByteReader *reader_; + + // The handler to which we should report the data we find. + Handler *handler_; + + // For reporting problems in the info we're parsing. + Reporter *reporter_; + + // The code address to which the next instruction in the stream applies. + uint64 address_; + + // The entry whose instructions we are currently processing. This is + // first a CIE, and then an FDE. + const Entry *entry_; + + // The next instruction to process. + const char *cursor_; + + // The current set of rules. + RuleMap rules_; + + // The set of rules established by the CIE, used by DW_CFA_restore + // and DW_CFA_restore_extended. We set this after interpreting the + // CIE's instructions. + RuleMap cie_rules_; + + // A stack of saved states, for DW_CFA_remember_state and + // DW_CFA_restore_state. + std::stack<RuleMap>* saved_rules_; +}; + +bool CallFrameInfo::State::InterpretCIE(const CIE &cie) { + entry_ = &cie; + cursor_ = entry_->instructions; + while (cursor_ < entry_->end) + if (!DoInstruction()) + return false; + // Note the rules established by the CIE, for use by DW_CFA_restore + // and DW_CFA_restore_extended. + cie_rules_ = rules_; + return true; +} + +bool CallFrameInfo::State::InterpretFDE(const FDE &fde) { + entry_ = &fde; + cursor_ = entry_->instructions; + while (cursor_ < entry_->end) + if (!DoInstruction()) + return false; + return true; +} + +bool CallFrameInfo::State::ParseOperands(const char *format, + Operands *operands) { + size_t len; + const char *operand; + + for (operand = format; *operand; operand++) { + size_t bytes_left = entry_->end - cursor_; + switch (*operand) { + case 'r': + operands->register_number = reader_->ReadUnsignedLEB128(cursor_, &len); + if (len > bytes_left) return ReportIncomplete(); + cursor_ += len; + break; + + case 'o': + operands->offset = reader_->ReadUnsignedLEB128(cursor_, &len); + if (len > bytes_left) return ReportIncomplete(); + cursor_ += len; + break; + + case 's': + operands->signed_offset = reader_->ReadSignedLEB128(cursor_, &len); + if (len > bytes_left) return ReportIncomplete(); + cursor_ += len; + break; + + case 'a': + operands->offset = + reader_->ReadEncodedPointer(cursor_, entry_->cie->pointer_encoding, + &len); + if (len > bytes_left) return ReportIncomplete(); + cursor_ += len; + break; + + case '1': + if (1 > bytes_left) return ReportIncomplete(); + operands->offset = static_cast<unsigned char>(*cursor_++); + break; + + case '2': + if (2 > bytes_left) return ReportIncomplete(); + operands->offset = reader_->ReadTwoBytes(cursor_); + cursor_ += 2; + break; + + case '4': + if (4 > bytes_left) return ReportIncomplete(); + operands->offset = reader_->ReadFourBytes(cursor_); + cursor_ += 4; + break; + + case '8': + if (8 > bytes_left) return ReportIncomplete(); + operands->offset = reader_->ReadEightBytes(cursor_); + cursor_ += 8; + break; + + case 'e': { + size_t expression_length = reader_->ReadUnsignedLEB128(cursor_, &len); + if (len > bytes_left || expression_length > bytes_left - len) + return ReportIncomplete(); + cursor_ += len; + operands->expression = string(cursor_, expression_length); + cursor_ += expression_length; + break; + } + + default: + MOZ_ASSERT(0); + } + } + + return true; +} + +bool CallFrameInfo::State::DoInstruction() { + CIE *cie = entry_->cie; + Operands ops; + + // Our entry's kind should have been set by now. + MOZ_ASSERT(entry_->kind != kUnknown); + + // We shouldn't have been invoked unless there were more + // instructions to parse. + MOZ_ASSERT(cursor_ < entry_->end); + + unsigned opcode = *cursor_++; + if ((opcode & 0xc0) != 0) { + switch (opcode & 0xc0) { + // Advance the address. + case DW_CFA_advance_loc: { + size_t code_offset = opcode & 0x3f; + address_ += code_offset * cie->code_alignment_factor; + break; + } + + // Find a register at an offset from the CFA. + case DW_CFA_offset: + if (!ParseOperands("o", &ops) || + !DoOffset(opcode & 0x3f, ops.offset * cie->data_alignment_factor)) + return false; + break; + + // Restore the rule established for a register by the CIE. + case DW_CFA_restore: + if (!DoRestore(opcode & 0x3f)) return false; + break; + + // The 'if' above should have excluded this possibility. + default: + MOZ_ASSERT(0); + } + + // Return here, so the big switch below won't be indented. + return true; + } + + switch (opcode) { + // Set the address. + case DW_CFA_set_loc: + if (!ParseOperands("a", &ops)) return false; + address_ = ops.offset; + break; + + // Advance the address. + case DW_CFA_advance_loc1: + if (!ParseOperands("1", &ops)) return false; + address_ += ops.offset * cie->code_alignment_factor; + break; + + // Advance the address. + case DW_CFA_advance_loc2: + if (!ParseOperands("2", &ops)) return false; + address_ += ops.offset * cie->code_alignment_factor; + break; + + // Advance the address. + case DW_CFA_advance_loc4: + if (!ParseOperands("4", &ops)) return false; + address_ += ops.offset * cie->code_alignment_factor; + break; + + // Advance the address. + case DW_CFA_MIPS_advance_loc8: + if (!ParseOperands("8", &ops)) return false; + address_ += ops.offset * cie->code_alignment_factor; + break; + + // Compute the CFA by adding an offset to a register. + case DW_CFA_def_cfa: + if (!ParseOperands("ro", &ops) || + !DoDefCFA(ops.register_number, ops.offset)) + return false; + break; + + // Compute the CFA by adding an offset to a register. + case DW_CFA_def_cfa_sf: + if (!ParseOperands("rs", &ops) || + !DoDefCFA(ops.register_number, + ops.signed_offset * cie->data_alignment_factor)) + return false; + break; + + // Change the base register used to compute the CFA. + case DW_CFA_def_cfa_register: { + Rule *cfa_rule = rules_.CFARule(); + if (!cfa_rule) { + reporter_->NoCFARule(entry_->offset, entry_->kind, CursorOffset()); + return false; + } + if (!ParseOperands("r", &ops)) return false; + cfa_rule->SetBaseRegister(ops.register_number); + if (!cfa_rule->Handle(handler_, address_, Handler::kCFARegister)) + return false; + break; + } + + // Change the offset used to compute the CFA. + case DW_CFA_def_cfa_offset: + if (!ParseOperands("o", &ops) || + !DoDefCFAOffset(ops.offset)) + return false; + break; + + // Change the offset used to compute the CFA. + case DW_CFA_def_cfa_offset_sf: + if (!ParseOperands("s", &ops) || + !DoDefCFAOffset(ops.signed_offset * cie->data_alignment_factor)) + return false; + break; + + // Specify an expression whose value is the CFA. + case DW_CFA_def_cfa_expression: { + if (!ParseOperands("e", &ops)) + return false; + Rule *rule = new ValExpressionRule(ops.expression); + rules_.SetCFARule(rule); + if (!rule->Handle(handler_, address_, Handler::kCFARegister)) + return false; + break; + } + + // The register's value cannot be recovered. + case DW_CFA_undefined: { + if (!ParseOperands("r", &ops) || + !DoRule(ops.register_number, new UndefinedRule())) + return false; + break; + } + + // The register's value is unchanged from its value in the caller. + case DW_CFA_same_value: { + if (!ParseOperands("r", &ops) || + !DoRule(ops.register_number, new SameValueRule())) + return false; + break; + } + + // Find a register at an offset from the CFA. + case DW_CFA_offset_extended: + if (!ParseOperands("ro", &ops) || + !DoOffset(ops.register_number, + ops.offset * cie->data_alignment_factor)) + return false; + break; + + // The register is saved at an offset from the CFA. + case DW_CFA_offset_extended_sf: + if (!ParseOperands("rs", &ops) || + !DoOffset(ops.register_number, + ops.signed_offset * cie->data_alignment_factor)) + return false; + break; + + // The register is saved at an offset from the CFA. + case DW_CFA_GNU_negative_offset_extended: + if (!ParseOperands("ro", &ops) || + !DoOffset(ops.register_number, + -ops.offset * cie->data_alignment_factor)) + return false; + break; + + // The register's value is the sum of the CFA plus an offset. + case DW_CFA_val_offset: + if (!ParseOperands("ro", &ops) || + !DoValOffset(ops.register_number, + ops.offset * cie->data_alignment_factor)) + return false; + break; + + // The register's value is the sum of the CFA plus an offset. + case DW_CFA_val_offset_sf: + if (!ParseOperands("rs", &ops) || + !DoValOffset(ops.register_number, + ops.signed_offset * cie->data_alignment_factor)) + return false; + break; + + // The register has been saved in another register. + case DW_CFA_register: { + if (!ParseOperands("ro", &ops) || + !DoRule(ops.register_number, new RegisterRule(ops.offset))) + return false; + break; + } + + // An expression yields the address at which the register is saved. + case DW_CFA_expression: { + if (!ParseOperands("re", &ops) || + !DoRule(ops.register_number, new ExpressionRule(ops.expression))) + return false; + break; + } + + // An expression yields the caller's value for the register. + case DW_CFA_val_expression: { + if (!ParseOperands("re", &ops) || + !DoRule(ops.register_number, new ValExpressionRule(ops.expression))) + return false; + break; + } + + // Restore the rule established for a register by the CIE. + case DW_CFA_restore_extended: + if (!ParseOperands("r", &ops) || + !DoRestore( ops.register_number)) + return false; + break; + + // Save the current set of rules on a stack. + case DW_CFA_remember_state: + if (!saved_rules_) { + saved_rules_ = new std::stack<RuleMap>(); + } + saved_rules_->push(rules_); + break; + + // Pop the current set of rules off the stack. + case DW_CFA_restore_state: { + if (!saved_rules_ || saved_rules_->empty()) { + reporter_->EmptyStateStack(entry_->offset, entry_->kind, + CursorOffset()); + return false; + } + const RuleMap &new_rules = saved_rules_->top(); + if (rules_.CFARule() && !new_rules.CFARule()) { + reporter_->ClearingCFARule(entry_->offset, entry_->kind, + CursorOffset()); + return false; + } + rules_.HandleTransitionTo(handler_, address_, new_rules); + rules_ = new_rules; + saved_rules_->pop(); + break; + } + + // No operation. (Padding instruction.) + case DW_CFA_nop: + break; + + // A SPARC register window save: Registers 8 through 15 (%o0-%o7) + // are saved in registers 24 through 31 (%i0-%i7), and registers + // 16 through 31 (%l0-%l7 and %i0-%i7) are saved at CFA offsets + // (0-15 * the register size). The register numbers must be + // hard-coded. A GNU extension, and not a pretty one. + case DW_CFA_GNU_window_save: { + // Save %o0-%o7 in %i0-%i7. + for (int i = 8; i < 16; i++) + if (!DoRule(i, new RegisterRule(i + 16))) + return false; + // Save %l0-%l7 and %i0-%i7 at the CFA. + for (int i = 16; i < 32; i++) + // Assume that the byte reader's address size is the same as + // the architecture's register size. !@#%*^ hilarious. + if (!DoRule(i, new OffsetRule(Handler::kCFARegister, + (i - 16) * reader_->AddressSize()))) + return false; + break; + } + + // I'm not sure what this is. GDB doesn't use it for unwinding. + case DW_CFA_GNU_args_size: + if (!ParseOperands("o", &ops)) return false; + break; + + // An opcode we don't recognize. + default: { + reporter_->BadInstruction(entry_->offset, entry_->kind, CursorOffset()); + return false; + } + } + + return true; +} + +bool CallFrameInfo::State::DoDefCFA(unsigned base_register, long offset) { + Rule *rule = new ValOffsetRule(base_register, offset); + rules_.SetCFARule(rule); + return rule->Handle(handler_, address_, Handler::kCFARegister); +} + +bool CallFrameInfo::State::DoDefCFAOffset(long offset) { + Rule *cfa_rule = rules_.CFARule(); + if (!cfa_rule) { + reporter_->NoCFARule(entry_->offset, entry_->kind, CursorOffset()); + return false; + } + cfa_rule->SetOffset(offset); + return cfa_rule->Handle(handler_, address_, Handler::kCFARegister); +} + +bool CallFrameInfo::State::DoRule(unsigned reg, Rule *rule) { + rules_.SetRegisterRule(reg, rule); + return rule->Handle(handler_, address_, reg); +} + +bool CallFrameInfo::State::DoOffset(unsigned reg, long offset) { + if (!rules_.CFARule()) { + reporter_->NoCFARule(entry_->offset, entry_->kind, CursorOffset()); + return false; + } + return DoRule(reg, + new OffsetRule(Handler::kCFARegister, offset)); +} + +bool CallFrameInfo::State::DoValOffset(unsigned reg, long offset) { + if (!rules_.CFARule()) { + reporter_->NoCFARule(entry_->offset, entry_->kind, CursorOffset()); + return false; + } + return DoRule(reg, + new ValOffsetRule(Handler::kCFARegister, offset)); +} + +bool CallFrameInfo::State::DoRestore(unsigned reg) { + // DW_CFA_restore and DW_CFA_restore_extended don't make sense in a CIE. + if (entry_->kind == kCIE) { + reporter_->RestoreInCIE(entry_->offset, CursorOffset()); + return false; + } + Rule *rule = cie_rules_.RegisterRule(reg); + if (!rule) { + // This isn't really the right thing to do, but since CFI generally + // only mentions callee-saves registers, and GCC's convention for + // callee-saves registers is that they are unchanged, it's a good + // approximation. + rule = new SameValueRule(); + } + return DoRule(reg, rule); +} + +bool CallFrameInfo::ReadEntryPrologue(const char *cursor, Entry *entry) { + const char *buffer_end = buffer_ + buffer_length_; + + // Initialize enough of ENTRY for use in error reporting. + entry->offset = cursor - buffer_; + entry->start = cursor; + entry->kind = kUnknown; + entry->end = NULL; + + // Read the initial length. This sets reader_'s offset size. + size_t length_size; + uint64 length = reader_->ReadInitialLength(cursor, &length_size); + if (length_size > size_t(buffer_end - cursor)) + return ReportIncomplete(entry); + cursor += length_size; + + // In a .eh_frame section, a length of zero marks the end of the series + // of entries. + if (length == 0 && eh_frame_) { + entry->kind = kTerminator; + entry->end = cursor; + return true; + } + + // Validate the length. + if (length > size_t(buffer_end - cursor)) + return ReportIncomplete(entry); + + // The length is the number of bytes after the initial length field; + // we have that position handy at this point, so compute the end + // now. (If we're parsing 64-bit-offset DWARF on a 32-bit machine, + // and the length didn't fit in a size_t, we would have rejected it + // above.) + entry->end = cursor + length; + + // Parse the next field: either the offset of a CIE or a CIE id. + size_t offset_size = reader_->OffsetSize(); + if (offset_size > size_t(entry->end - cursor)) return ReportIncomplete(entry); + entry->id = reader_->ReadOffset(cursor); + + // Don't advance cursor past id field yet; in .eh_frame data we need + // the id's position to compute the section offset of an FDE's CIE. + + // Now we can decide what kind of entry this is. + if (eh_frame_) { + // In .eh_frame data, an ID of zero marks the entry as a CIE, and + // anything else is an offset from the id field of the FDE to the start + // of the CIE. + if (entry->id == 0) { + entry->kind = kCIE; + } else { + entry->kind = kFDE; + // Turn the offset from the id into an offset from the buffer's start. + entry->id = (cursor - buffer_) - entry->id; + } + } else { + // In DWARF CFI data, an ID of ~0 (of the appropriate width, given the + // offset size for the entry) marks the entry as a CIE, and anything + // else is the offset of the CIE from the beginning of the section. + if (offset_size == 4) + entry->kind = (entry->id == 0xffffffff) ? kCIE : kFDE; + else { + MOZ_ASSERT(offset_size == 8); + entry->kind = (entry->id == 0xffffffffffffffffULL) ? kCIE : kFDE; + } + } + + // Now advance cursor past the id. + cursor += offset_size; + + // The fields specific to this kind of entry start here. + entry->fields = cursor; + + entry->cie = NULL; + + return true; +} + +bool CallFrameInfo::ReadCIEFields(CIE *cie) { + const char *cursor = cie->fields; + size_t len; + + MOZ_ASSERT(cie->kind == kCIE); + + // Prepare for early exit. + cie->version = 0; + cie->augmentation.clear(); + cie->code_alignment_factor = 0; + cie->data_alignment_factor = 0; + cie->return_address_register = 0; + cie->has_z_augmentation = false; + cie->pointer_encoding = DW_EH_PE_absptr; + cie->instructions = 0; + + // Parse the version number. + if (cie->end - cursor < 1) + return ReportIncomplete(cie); + cie->version = reader_->ReadOneByte(cursor); + cursor++; + + // If we don't recognize the version, we can't parse any more fields of the + // CIE. For DWARF CFI, we handle versions 1 through 3 (there was never a + // version 2 of CFI data). For .eh_frame, we handle versions 1 and 3 as well; + // the difference between those versions seems to be the same as for + // .debug_frame. + if (cie->version < 1 || cie->version > 3) { + reporter_->UnrecognizedVersion(cie->offset, cie->version); + return false; + } + + const char *augmentation_start = cursor; + const void *augmentation_end = + memchr(augmentation_start, '\0', cie->end - augmentation_start); + if (! augmentation_end) return ReportIncomplete(cie); + cursor = static_cast<const char *>(augmentation_end); + cie->augmentation = string(augmentation_start, + cursor - augmentation_start); + // Skip the terminating '\0'. + cursor++; + + // Is this CFI augmented? + if (!cie->augmentation.empty()) { + // Is it an augmentation we recognize? + if (cie->augmentation[0] == DW_Z_augmentation_start) { + // Linux C++ ABI 'z' augmentation, used for exception handling data. + cie->has_z_augmentation = true; + } else { + // Not an augmentation we recognize. Augmentations can have arbitrary + // effects on the form of rest of the content, so we have to give up. + reporter_->UnrecognizedAugmentation(cie->offset, cie->augmentation); + return false; + } + } + + // Parse the code alignment factor. + cie->code_alignment_factor = reader_->ReadUnsignedLEB128(cursor, &len); + if (size_t(cie->end - cursor) < len) return ReportIncomplete(cie); + cursor += len; + + // Parse the data alignment factor. + cie->data_alignment_factor = reader_->ReadSignedLEB128(cursor, &len); + if (size_t(cie->end - cursor) < len) return ReportIncomplete(cie); + cursor += len; + + // Parse the return address register. This is a ubyte in version 1, and + // a ULEB128 in version 3. + if (cie->version == 1) { + if (cursor >= cie->end) return ReportIncomplete(cie); + cie->return_address_register = uint8(*cursor++); + } else { + cie->return_address_register = reader_->ReadUnsignedLEB128(cursor, &len); + if (size_t(cie->end - cursor) < len) return ReportIncomplete(cie); + cursor += len; + } + + // If we have a 'z' augmentation string, find the augmentation data and + // use the augmentation string to parse it. + if (cie->has_z_augmentation) { + uint64_t data_size = reader_->ReadUnsignedLEB128(cursor, &len); + if (size_t(cie->end - cursor) < len + data_size) + return ReportIncomplete(cie); + cursor += len; + const char *data = cursor; + cursor += data_size; + const char *data_end = cursor; + + cie->has_z_lsda = false; + cie->has_z_personality = false; + cie->has_z_signal_frame = false; + + // Walk the augmentation string, and extract values from the + // augmentation data as the string directs. + for (size_t i = 1; i < cie->augmentation.size(); i++) { + switch (cie->augmentation[i]) { + case DW_Z_has_LSDA: + // The CIE's augmentation data holds the language-specific data + // area pointer's encoding, and the FDE's augmentation data holds + // the pointer itself. + cie->has_z_lsda = true; + // Fetch the LSDA encoding from the augmentation data. + if (data >= data_end) return ReportIncomplete(cie); + cie->lsda_encoding = DwarfPointerEncoding(*data++); + if (!reader_->ValidEncoding(cie->lsda_encoding)) { + reporter_->InvalidPointerEncoding(cie->offset, cie->lsda_encoding); + return false; + } + // Don't check if the encoding is usable here --- we haven't + // read the FDE's fields yet, so we're not prepared for + // DW_EH_PE_funcrel, although that's a fine encoding for the + // LSDA to use, since it appears in the FDE. + break; + + case DW_Z_has_personality_routine: + // The CIE's augmentation data holds the personality routine + // pointer's encoding, followed by the pointer itself. + cie->has_z_personality = true; + // Fetch the personality routine pointer's encoding from the + // augmentation data. + if (data >= data_end) return ReportIncomplete(cie); + cie->personality_encoding = DwarfPointerEncoding(*data++); + if (!reader_->ValidEncoding(cie->personality_encoding)) { + reporter_->InvalidPointerEncoding(cie->offset, + cie->personality_encoding); + return false; + } + if (!reader_->UsableEncoding(cie->personality_encoding)) { + reporter_->UnusablePointerEncoding(cie->offset, + cie->personality_encoding); + return false; + } + // Fetch the personality routine's pointer itself from the data. + cie->personality_address = + reader_->ReadEncodedPointer(data, cie->personality_encoding, + &len); + if (len > size_t(data_end - data)) + return ReportIncomplete(cie); + data += len; + break; + + case DW_Z_has_FDE_address_encoding: + // The CIE's augmentation data holds the pointer encoding to use + // for addresses in the FDE. + if (data >= data_end) return ReportIncomplete(cie); + cie->pointer_encoding = DwarfPointerEncoding(*data++); + if (!reader_->ValidEncoding(cie->pointer_encoding)) { + reporter_->InvalidPointerEncoding(cie->offset, + cie->pointer_encoding); + return false; + } + if (!reader_->UsableEncoding(cie->pointer_encoding)) { + reporter_->UnusablePointerEncoding(cie->offset, + cie->pointer_encoding); + return false; + } + break; + + case DW_Z_is_signal_trampoline: + // Frames using this CIE are signal delivery frames. + cie->has_z_signal_frame = true; + break; + + default: + // An augmentation we don't recognize. + reporter_->UnrecognizedAugmentation(cie->offset, cie->augmentation); + return false; + } + } + } + + // The CIE's instructions start here. + cie->instructions = cursor; + + return true; +} + +bool CallFrameInfo::ReadFDEFields(FDE *fde) { + const char *cursor = fde->fields; + size_t size; + + fde->address = reader_->ReadEncodedPointer(cursor, fde->cie->pointer_encoding, + &size); + if (size > size_t(fde->end - cursor)) + return ReportIncomplete(fde); + cursor += size; + reader_->SetFunctionBase(fde->address); + + // For the length, we strip off the upper nybble of the encoding used for + // the starting address. + DwarfPointerEncoding length_encoding = + DwarfPointerEncoding(fde->cie->pointer_encoding & 0x0f); + fde->size = reader_->ReadEncodedPointer(cursor, length_encoding, &size); + if (size > size_t(fde->end - cursor)) + return ReportIncomplete(fde); + cursor += size; + + // If the CIE has a 'z' augmentation string, then augmentation data + // appears here. + if (fde->cie->has_z_augmentation) { + uint64_t data_size = reader_->ReadUnsignedLEB128(cursor, &size); + if (size_t(fde->end - cursor) < size + data_size) + return ReportIncomplete(fde); + cursor += size; + + // In the abstract, we should walk the augmentation string, and extract + // items from the FDE's augmentation data as we encounter augmentation + // string characters that specify their presence: the ordering of items + // in the augmentation string determines the arrangement of values in + // the augmentation data. + // + // In practice, there's only ever one value in FDE augmentation data + // that we support --- the LSDA pointer --- and we have to bail if we + // see any unrecognized augmentation string characters. So if there is + // anything here at all, we know what it is, and where it starts. + if (fde->cie->has_z_lsda) { + // Check whether the LSDA's pointer encoding is usable now: only once + // we've parsed the FDE's starting address do we call reader_-> + // SetFunctionBase, so that the DW_EH_PE_funcrel encoding becomes + // usable. + if (!reader_->UsableEncoding(fde->cie->lsda_encoding)) { + reporter_->UnusablePointerEncoding(fde->cie->offset, + fde->cie->lsda_encoding); + return false; + } + + fde->lsda_address = + reader_->ReadEncodedPointer(cursor, fde->cie->lsda_encoding, &size); + if (size > data_size) + return ReportIncomplete(fde); + // Ideally, we would also complain here if there were unconsumed + // augmentation data. + } + + cursor += data_size; + } + + // The FDE's instructions start after those. + fde->instructions = cursor; + + return true; +} + +bool CallFrameInfo::Start() { + const char *buffer_end = buffer_ + buffer_length_; + const char *cursor; + bool all_ok = true; + const char *entry_end; + bool ok; + + // Traverse all the entries in buffer_, skipping CIEs and offering + // FDEs to the handler. + for (cursor = buffer_; cursor < buffer_end; + cursor = entry_end, all_ok = all_ok && ok) { + FDE fde; + + // Make it easy to skip this entry with 'continue': assume that + // things are not okay until we've checked all the data, and + // prepare the address of the next entry. + ok = false; + + // Read the entry's prologue. + if (!ReadEntryPrologue(cursor, &fde)) { + if (!fde.end) { + // If we couldn't even figure out this entry's extent, then we + // must stop processing entries altogether. + all_ok = false; + break; + } + entry_end = fde.end; + continue; + } + + // The next iteration picks up after this entry. + entry_end = fde.end; + + // Did we see an .eh_frame terminating mark? + if (fde.kind == kTerminator) { + // If there appears to be more data left in the section after the + // terminating mark, warn the user. But this is just a warning; + // we leave all_ok true. + if (fde.end < buffer_end) reporter_->EarlyEHTerminator(fde.offset); + break; + } + + // In this loop, we skip CIEs. We only parse them fully when we + // parse an FDE that refers to them. This limits our memory + // consumption (beyond the buffer itself) to that needed to + // process the largest single entry. + if (fde.kind != kFDE) { + ok = true; + continue; + } + + // Validate the CIE pointer. + if (fde.id > buffer_length_) { + reporter_->CIEPointerOutOfRange(fde.offset, fde.id); + continue; + } + + CIE cie; + + // Parse this FDE's CIE header. + if (!ReadEntryPrologue(buffer_ + fde.id, &cie)) + continue; + // This had better be an actual CIE. + if (cie.kind != kCIE) { + reporter_->BadCIEId(fde.offset, fde.id); + continue; + } + if (!ReadCIEFields(&cie)) + continue; + + // We now have the values that govern both the CIE and the FDE. + cie.cie = &cie; + fde.cie = &cie; + + // Parse the FDE's header. + if (!ReadFDEFields(&fde)) + continue; + + // Call Entry to ask the consumer if they're interested. + if (!handler_->Entry(fde.offset, fde.address, fde.size, + cie.version, cie.augmentation, + cie.return_address_register)) { + // The handler isn't interested in this entry. That's not an error. + ok = true; + continue; + } + + if (cie.has_z_augmentation) { + // Report the personality routine address, if we have one. + if (cie.has_z_personality) { + if (!handler_ + ->PersonalityRoutine(cie.personality_address, + IsIndirectEncoding(cie.personality_encoding))) + continue; + } + + // Report the language-specific data area address, if we have one. + if (cie.has_z_lsda) { + if (!handler_ + ->LanguageSpecificDataArea(fde.lsda_address, + IsIndirectEncoding(cie.lsda_encoding))) + continue; + } + + // If this is a signal-handling frame, report that. + if (cie.has_z_signal_frame) { + if (!handler_->SignalHandler()) + continue; + } + } + + // Interpret the CIE's instructions, and then the FDE's instructions. + State state(reader_, handler_, reporter_, fde.address); + ok = state.InterpretCIE(cie) && state.InterpretFDE(fde); + + // Tell the ByteReader that the function start address from the + // FDE header is no longer valid. + reader_->ClearFunctionBase(); + + // Report the end of the entry. + handler_->End(); + } + + return all_ok; +} + +const char *CallFrameInfo::KindName(EntryKind kind) { + if (kind == CallFrameInfo::kUnknown) + return "entry"; + else if (kind == CallFrameInfo::kCIE) + return "common information entry"; + else if (kind == CallFrameInfo::kFDE) + return "frame description entry"; + else { + MOZ_ASSERT (kind == CallFrameInfo::kTerminator); + return ".eh_frame sequence terminator"; + } +} + +bool CallFrameInfo::ReportIncomplete(Entry *entry) { + reporter_->Incomplete(entry->offset, entry->kind); + return false; +} + +void CallFrameInfo::Reporter::Incomplete(uint64 offset, + CallFrameInfo::EntryKind kind) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI %s at offset 0x%llx in '%s': entry ends early\n", + filename_.c_str(), CallFrameInfo::KindName(kind), offset, + section_.c_str()); + log_(buf); +} + +void CallFrameInfo::Reporter::EarlyEHTerminator(uint64 offset) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI at offset 0x%llx in '%s': saw end-of-data marker" + " before end of section contents\n", + filename_.c_str(), offset, section_.c_str()); + log_(buf); +} + +void CallFrameInfo::Reporter::CIEPointerOutOfRange(uint64 offset, + uint64 cie_offset) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI frame description entry at offset 0x%llx in '%s':" + " CIE pointer is out of range: 0x%llx\n", + filename_.c_str(), offset, section_.c_str(), cie_offset); + log_(buf); +} + +void CallFrameInfo::Reporter::BadCIEId(uint64 offset, uint64 cie_offset) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI frame description entry at offset 0x%llx in '%s':" + " CIE pointer does not point to a CIE: 0x%llx\n", + filename_.c_str(), offset, section_.c_str(), cie_offset); + log_(buf); +} + +void CallFrameInfo::Reporter::UnrecognizedVersion(uint64 offset, int version) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI frame description entry at offset 0x%llx in '%s':" + " CIE specifies unrecognized version: %d\n", + filename_.c_str(), offset, section_.c_str(), version); + log_(buf); +} + +void CallFrameInfo::Reporter::UnrecognizedAugmentation(uint64 offset, + const string &aug) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI frame description entry at offset 0x%llx in '%s':" + " CIE specifies unrecognized augmentation: '%s'\n", + filename_.c_str(), offset, section_.c_str(), aug.c_str()); + log_(buf); +} + +void CallFrameInfo::Reporter::InvalidPointerEncoding(uint64 offset, + uint8 encoding) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI common information entry at offset 0x%llx in '%s':" + " 'z' augmentation specifies invalid pointer encoding: " + "0x%02x\n", + filename_.c_str(), offset, section_.c_str(), encoding); + log_(buf); +} + +void CallFrameInfo::Reporter::UnusablePointerEncoding(uint64 offset, + uint8 encoding) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI common information entry at offset 0x%llx in '%s':" + " 'z' augmentation specifies a pointer encoding for which" + " we have no base address: 0x%02x\n", + filename_.c_str(), offset, section_.c_str(), encoding); + log_(buf); +} + +void CallFrameInfo::Reporter::RestoreInCIE(uint64 offset, uint64 insn_offset) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI common information entry at offset 0x%llx in '%s':" + " the DW_CFA_restore instruction at offset 0x%llx" + " cannot be used in a common information entry\n", + filename_.c_str(), offset, section_.c_str(), insn_offset); + log_(buf); +} + +void CallFrameInfo::Reporter::BadInstruction(uint64 offset, + CallFrameInfo::EntryKind kind, + uint64 insn_offset) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI %s at offset 0x%llx in section '%s':" + " the instruction at offset 0x%llx is unrecognized\n", + filename_.c_str(), CallFrameInfo::KindName(kind), + offset, section_.c_str(), insn_offset); + log_(buf); +} + +void CallFrameInfo::Reporter::NoCFARule(uint64 offset, + CallFrameInfo::EntryKind kind, + uint64 insn_offset) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI %s at offset 0x%llx in section '%s':" + " the instruction at offset 0x%llx assumes that a CFA rule " + "has been set, but none has been set\n", + filename_.c_str(), CallFrameInfo::KindName(kind), offset, + section_.c_str(), insn_offset); + log_(buf); +} + +void CallFrameInfo::Reporter::EmptyStateStack(uint64 offset, + CallFrameInfo::EntryKind kind, + uint64 insn_offset) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI %s at offset 0x%llx in section '%s':" + " the DW_CFA_restore_state instruction at offset 0x%llx" + " should pop a saved state from the stack, but the stack " + "is empty\n", + filename_.c_str(), CallFrameInfo::KindName(kind), offset, + section_.c_str(), insn_offset); + log_(buf); +} + +void CallFrameInfo::Reporter::ClearingCFARule(uint64 offset, + CallFrameInfo::EntryKind kind, + uint64 insn_offset) { + char buf[300]; + SprintfLiteral(buf, + "%s: CFI %s at offset 0x%llx in section '%s':" + " the DW_CFA_restore_state instruction at offset 0x%llx" + " would clear the CFA rule in effect\n", + filename_.c_str(), CallFrameInfo::KindName(kind), offset, + section_.c_str(), insn_offset); + log_(buf); +} + + +unsigned int DwarfCFIToModule::RegisterNames::I386() { + /* + 8 "$eax", "$ecx", "$edx", "$ebx", "$esp", "$ebp", "$esi", "$edi", + 3 "$eip", "$eflags", "$unused1", + 8 "$st0", "$st1", "$st2", "$st3", "$st4", "$st5", "$st6", "$st7", + 2 "$unused2", "$unused3", + 8 "$xmm0", "$xmm1", "$xmm2", "$xmm3", "$xmm4", "$xmm5", "$xmm6", "$xmm7", + 8 "$mm0", "$mm1", "$mm2", "$mm3", "$mm4", "$mm5", "$mm6", "$mm7", + 3 "$fcw", "$fsw", "$mxcsr", + 8 "$es", "$cs", "$ss", "$ds", "$fs", "$gs", "$unused4", "$unused5", + 2 "$tr", "$ldtr" + */ + return 8 + 3 + 8 + 2 + 8 + 8 + 3 + 8 + 2; +} + +unsigned int DwarfCFIToModule::RegisterNames::X86_64() { + /* + 8 "$rax", "$rdx", "$rcx", "$rbx", "$rsi", "$rdi", "$rbp", "$rsp", + 8 "$r8", "$r9", "$r10", "$r11", "$r12", "$r13", "$r14", "$r15", + 1 "$rip", + 8 "$xmm0","$xmm1","$xmm2", "$xmm3", "$xmm4", "$xmm5", "$xmm6", "$xmm7", + 8 "$xmm8","$xmm9","$xmm10","$xmm11","$xmm12","$xmm13","$xmm14","$xmm15", + 8 "$st0", "$st1", "$st2", "$st3", "$st4", "$st5", "$st6", "$st7", + 8 "$mm0", "$mm1", "$mm2", "$mm3", "$mm4", "$mm5", "$mm6", "$mm7", + 1 "$rflags", + 8 "$es", "$cs", "$ss", "$ds", "$fs", "$gs", "$unused1", "$unused2", + 4 "$fs.base", "$gs.base", "$unused3", "$unused4", + 2 "$tr", "$ldtr", + 3 "$mxcsr", "$fcw", "$fsw" + */ + return 8 + 8 + 1 + 8 + 8 + 8 + 8 + 1 + 8 + 4 + 2 + 3; +} + +// Per ARM IHI 0040A, section 3.1 +unsigned int DwarfCFIToModule::RegisterNames::ARM() { + /* + 8 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", + 8 "r8", "r9", "r10", "r11", "r12", "sp", "lr", "pc", + 8 "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", + 8 "fps", "cpsr", "", "", "", "", "", "", + 8 "", "", "", "", "", "", "", "", + 8 "", "", "", "", "", "", "", "", + 8 "", "", "", "", "", "", "", "", + 8 "", "", "", "", "", "", "", "", + 8 "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", + 8 "s8", "s9", "s10", "s11", "s12", "s13", "s14", "s15", + 8 "s16", "s17", "s18", "s19", "s20", "s21", "s22", "s23", + 8 "s24", "s25", "s26", "s27", "s28", "s29", "s30", "s31", + 8 "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7" + */ + return 13 * 8; +} + +// See prototype for comments. +int32_t parseDwarfExpr(Summariser* summ, const ByteReader* reader, + string expr, bool debug, + bool pushCfaAtStart, bool derefAtEnd) +{ + const char* cursor = expr.c_str(); + const char* end1 = cursor + expr.length(); + + char buf[100]; + if (debug) { + SprintfLiteral(buf, "LUL.DW << DwarfExpr, len is %d\n", + (int)(end1 - cursor)); + summ->Log(buf); + } + + // Add a marker for the start of this expression. In it, indicate + // whether or not the CFA should be pushed onto the stack prior to + // evaluation. + int32_t start_ix + = summ->AddPfxInstr(PfxInstr(PX_Start, pushCfaAtStart ? 1 : 0)); + MOZ_ASSERT(start_ix >= 0); + + while (cursor < end1) { + + uint8 opc = reader->ReadOneByte(cursor); + cursor++; + + const char* nm = nullptr; + PfxExprOp pxop = PX_End; + + switch (opc) { + + case DW_OP_lit0 ... DW_OP_lit31: { + int32_t simm32 = (int32_t)(opc - DW_OP_lit0); + if (debug) { + SprintfLiteral(buf, "LUL.DW DW_OP_lit%d\n", (int)simm32); + summ->Log(buf); + } + (void) summ->AddPfxInstr(PfxInstr(PX_SImm32, simm32)); + break; + } + + case DW_OP_breg0 ... DW_OP_breg31: { + size_t len; + int64_t n = reader->ReadSignedLEB128(cursor, &len); + cursor += len; + DW_REG_NUMBER reg = (DW_REG_NUMBER)(opc - DW_OP_breg0); + if (debug) { + SprintfLiteral(buf, "LUL.DW DW_OP_breg%d %lld\n", + (int)reg, (long long int)n); + summ->Log(buf); + } + // PfxInstr only allows a 32 bit signed offset. So we + // must fail if the immediate is out of range. + if (n < INT32_MIN || INT32_MAX < n) + goto fail; + (void) summ->AddPfxInstr(PfxInstr(PX_DwReg, reg)); + (void) summ->AddPfxInstr(PfxInstr(PX_SImm32, (int32_t)n)); + (void) summ->AddPfxInstr(PfxInstr(PX_Add)); + break; + } + + case DW_OP_const4s: { + uint64_t u64 = reader->ReadFourBytes(cursor); + cursor += 4; + // u64 is guaranteed by |ReadFourBytes| to be in the + // range 0 .. FFFFFFFF inclusive. But to be safe: + uint32_t u32 = (uint32_t)(u64 & 0xFFFFFFFF); + int32_t s32 = (int32_t)u32; + if (debug) { + SprintfLiteral(buf, "LUL.DW DW_OP_const4s %d\n", (int)s32); + summ->Log(buf); + } + (void) summ->AddPfxInstr(PfxInstr(PX_SImm32, s32)); + break; + } + + case DW_OP_deref: nm = "deref"; pxop = PX_Deref; goto no_operands; + case DW_OP_and: nm = "and"; pxop = PX_And; goto no_operands; + case DW_OP_plus: nm = "plus"; pxop = PX_Add; goto no_operands; + case DW_OP_minus: nm = "minus"; pxop = PX_Sub; goto no_operands; + case DW_OP_shl: nm = "shl"; pxop = PX_Shl; goto no_operands; + case DW_OP_ge: nm = "ge"; pxop = PX_CmpGES; goto no_operands; + no_operands: + MOZ_ASSERT(nm && pxop != PX_End); + if (debug) { + SprintfLiteral(buf, "LUL.DW DW_OP_%s\n", nm); + summ->Log(buf); + } + (void) summ->AddPfxInstr(PfxInstr(pxop)); + break; + + default: + if (debug) { + SprintfLiteral(buf, "LUL.DW unknown opc %d\n", (int)opc); + summ->Log(buf); + } + goto fail; + + } // switch (opc) + + } // while (cursor < end1) + + MOZ_ASSERT(cursor >= end1); + + if (cursor > end1) { + // We overran the Dwarf expression. Give up. + goto fail; + } + + // For DW_CFA_expression, what the expression denotes is the address + // of where the previous value is located. The caller of this routine + // may therefore request one last dereference before the end marker is + // inserted. + if (derefAtEnd) { + (void) summ->AddPfxInstr(PfxInstr(PX_Deref)); + } + + // Insert an end marker, and declare success. + (void) summ->AddPfxInstr(PfxInstr(PX_End)); + if (debug) { + SprintfLiteral(buf, "LUL.DW conversion of dwarf expression succeeded, " + "ix = %d\n", (int)start_ix); + summ->Log(buf); + summ->Log("LUL.DW >>\n"); + } + return start_ix; + + fail: + if (debug) { + summ->Log("LUL.DW conversion of dwarf expression failed\n"); + summ->Log("LUL.DW >>\n"); + } + return -1; +} + + +bool DwarfCFIToModule::Entry(size_t offset, uint64 address, uint64 length, + uint8 version, const string &augmentation, + unsigned return_address) { + if (DEBUG_DWARF) { + char buf[100]; + SprintfLiteral(buf, "LUL.DW DwarfCFIToModule::Entry 0x%llx,+%lld\n", + address, length); + summ_->Log(buf); + } + + summ_->Entry(address, length); + + // If dwarf2reader::CallFrameInfo can handle this version and + // augmentation, then we should be okay with that, so there's no + // need to check them here. + + // Get ready to collect entries. + return_address_ = return_address; + + // Breakpad STACK CFI records must provide a .ra rule, but DWARF CFI + // may not establish any rule for .ra if the return address column + // is an ordinary register, and that register holds the return + // address on entry to the function. So establish an initial .ra + // rule citing the return address register. + if (return_address_ < num_dw_regs_) { + summ_->Rule(address, return_address_, NODEREF, return_address, 0); + } + + return true; +} + +const UniqueString* DwarfCFIToModule::RegisterName(int i) { + if (i < 0) { + MOZ_ASSERT(i == kCFARegister); + return usu_->ToUniqueString(".cfa"); + } + unsigned reg = i; + if (reg == return_address_) + return usu_->ToUniqueString(".ra"); + + char buf[30]; + SprintfLiteral(buf, "dwarf_reg_%u", reg); + return usu_->ToUniqueString(buf); +} + +bool DwarfCFIToModule::UndefinedRule(uint64 address, int reg) { + reporter_->UndefinedNotSupported(entry_offset_, RegisterName(reg)); + // Treat this as a non-fatal error. + return true; +} + +bool DwarfCFIToModule::SameValueRule(uint64 address, int reg) { + if (DEBUG_DWARF) { + char buf[100]; + SprintfLiteral(buf, "LUL.DW 0x%llx: old r%d = Same\n", address, reg); + summ_->Log(buf); + } + // reg + 0 + summ_->Rule(address, reg, NODEREF, reg, 0); + return true; +} + +bool DwarfCFIToModule::OffsetRule(uint64 address, int reg, + int base_register, long offset) { + if (DEBUG_DWARF) { + char buf[100]; + SprintfLiteral(buf, "LUL.DW 0x%llx: old r%d = *(r%d + %ld)\n", + address, reg, base_register, offset); + summ_->Log(buf); + } + // *(base_register + offset) + summ_->Rule(address, reg, DEREF, base_register, offset); + return true; +} + +bool DwarfCFIToModule::ValOffsetRule(uint64 address, int reg, + int base_register, long offset) { + if (DEBUG_DWARF) { + char buf[100]; + SprintfLiteral(buf, "LUL.DW 0x%llx: old r%d = r%d + %ld\n", + address, reg, base_register, offset); + summ_->Log(buf); + } + // base_register + offset + summ_->Rule(address, reg, NODEREF, base_register, offset); + return true; +} + +bool DwarfCFIToModule::RegisterRule(uint64 address, int reg, + int base_register) { + if (DEBUG_DWARF) { + char buf[100]; + SprintfLiteral(buf, "LUL.DW 0x%llx: old r%d = r%d\n", + address, reg, base_register); + summ_->Log(buf); + } + // base_register + 0 + summ_->Rule(address, reg, NODEREF, base_register, 0); + return true; +} + +bool DwarfCFIToModule::ExpressionRule(uint64 address, int reg, + const string &expression) +{ + bool debug = !!DEBUG_DWARF; + int32_t start_ix = parseDwarfExpr(summ_, reader_, expression, debug, + true/*pushCfaAtStart*/, + true/*derefAtEnd*/); + if (start_ix >= 0) { + summ_->Rule(address, reg, PFXEXPR, 0, start_ix); + } else { + // Parsing of the Dwarf expression failed. Treat this as a + // non-fatal error, hence return |true| even on this path. + reporter_->ExpressionCouldNotBeSummarised(entry_offset_, RegisterName(reg)); + } + return true; +} + +bool DwarfCFIToModule::ValExpressionRule(uint64 address, int reg, + const string &expression) +{ + bool debug = !!DEBUG_DWARF; + int32_t start_ix = parseDwarfExpr(summ_, reader_, expression, debug, + true/*pushCfaAtStart*/, + false/*!derefAtEnd*/); + if (start_ix >= 0) { + summ_->Rule(address, reg, PFXEXPR, 0, start_ix); + } else { + // Parsing of the Dwarf expression failed. Treat this as a + // non-fatal error, hence return |true| even on this path. + reporter_->ExpressionCouldNotBeSummarised(entry_offset_, RegisterName(reg)); + } + return true; +} + +bool DwarfCFIToModule::End() { + //module_->AddStackFrameEntry(entry_); + if (DEBUG_DWARF) { + summ_->Log("LUL.DW DwarfCFIToModule::End()\n"); + } + summ_->End(); + return true; +} + +void DwarfCFIToModule::Reporter::UndefinedNotSupported( + size_t offset, + const UniqueString* reg) { + char buf[300]; + SprintfLiteral(buf, "DwarfCFIToModule::Reporter::UndefinedNotSupported()\n"); + log_(buf); + //BPLOG(INFO) << file_ << ", section '" << section_ + // << "': the call frame entry at offset 0x" + // << std::setbase(16) << offset << std::setbase(10) + // << " sets the rule for register '" << FromUniqueString(reg) + // << "' to 'undefined', but the Breakpad symbol file format cannot " + // << " express this"; +} + +// FIXME: move this somewhere sensible +static bool is_power_of_2(uint64_t n) +{ + int i, nSetBits = 0; + for (i = 0; i < 8*(int)sizeof(n); i++) { + if ((n & ((uint64_t)1) << i) != 0) + nSetBits++; + } + return nSetBits <= 1; +} + +void DwarfCFIToModule::Reporter::ExpressionCouldNotBeSummarised( + size_t offset, + const UniqueString* reg) { + static uint64_t n_complaints = 0; // This isn't threadsafe + n_complaints++; + if (!is_power_of_2(n_complaints)) + return; + char buf[300]; + SprintfLiteral(buf, + "DwarfCFIToModule::Reporter::" + "ExpressionCouldNotBeSummarised(shown %llu times)\n", + (unsigned long long int)n_complaints); + log_(buf); +} + +} // namespace lul |