summaryrefslogtreecommitdiffstats
path: root/third_party/rust/libz-sys/src/zlib-1.2.8/infback.c
diff options
context:
space:
mode:
Diffstat (limited to 'third_party/rust/libz-sys/src/zlib-1.2.8/infback.c')
-rw-r--r--third_party/rust/libz-sys/src/zlib-1.2.8/infback.c640
1 files changed, 0 insertions, 640 deletions
diff --git a/third_party/rust/libz-sys/src/zlib-1.2.8/infback.c b/third_party/rust/libz-sys/src/zlib-1.2.8/infback.c
deleted file mode 100644
index f3833c2e4..000000000
--- a/third_party/rust/libz-sys/src/zlib-1.2.8/infback.c
+++ /dev/null
@@ -1,640 +0,0 @@
-/* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2011 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- This code is largely copied from inflate.c. Normally either infback.o or
- inflate.o would be linked into an application--not both. The interface
- with inffast.c is retained so that optimized assembler-coded versions of
- inflate_fast() can be used with either inflate.c or infback.c.
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-/* function prototypes */
-local void fixedtables OF((struct inflate_state FAR *state));
-
-/*
- strm provides memory allocation functions in zalloc and zfree, or
- Z_NULL to use the library memory allocation functions.
-
- windowBits is in the range 8..15, and window is a user-supplied
- window and output buffer that is 2**windowBits bytes.
- */
-int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
-z_streamp strm;
-int windowBits;
-unsigned char FAR *window;
-const char *version;
-int stream_size;
-{
- struct inflate_state FAR *state;
-
- if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
- stream_size != (int)(sizeof(z_stream)))
- return Z_VERSION_ERROR;
- if (strm == Z_NULL || window == Z_NULL ||
- windowBits < 8 || windowBits > 15)
- return Z_STREAM_ERROR;
- strm->msg = Z_NULL; /* in case we return an error */
- if (strm->zalloc == (alloc_func)0) {
-#ifdef Z_SOLO
- return Z_STREAM_ERROR;
-#else
- strm->zalloc = zcalloc;
- strm->opaque = (voidpf)0;
-#endif
- }
- if (strm->zfree == (free_func)0)
-#ifdef Z_SOLO
- return Z_STREAM_ERROR;
-#else
- strm->zfree = zcfree;
-#endif
- state = (struct inflate_state FAR *)ZALLOC(strm, 1,
- sizeof(struct inflate_state));
- if (state == Z_NULL) return Z_MEM_ERROR;
- Tracev((stderr, "inflate: allocated\n"));
- strm->state = (struct internal_state FAR *)state;
- state->dmax = 32768U;
- state->wbits = windowBits;
- state->wsize = 1U << windowBits;
- state->window = window;
- state->wnext = 0;
- state->whave = 0;
- return Z_OK;
-}
-
-/*
- Return state with length and distance decoding tables and index sizes set to
- fixed code decoding. Normally this returns fixed tables from inffixed.h.
- If BUILDFIXED is defined, then instead this routine builds the tables the
- first time it's called, and returns those tables the first time and
- thereafter. This reduces the size of the code by about 2K bytes, in
- exchange for a little execution time. However, BUILDFIXED should not be
- used for threaded applications, since the rewriting of the tables and virgin
- may not be thread-safe.
- */
-local void fixedtables(state)
-struct inflate_state FAR *state;
-{
-#ifdef BUILDFIXED
- static int virgin = 1;
- static code *lenfix, *distfix;
- static code fixed[544];
-
- /* build fixed huffman tables if first call (may not be thread safe) */
- if (virgin) {
- unsigned sym, bits;
- static code *next;
-
- /* literal/length table */
- sym = 0;
- while (sym < 144) state->lens[sym++] = 8;
- while (sym < 256) state->lens[sym++] = 9;
- while (sym < 280) state->lens[sym++] = 7;
- while (sym < 288) state->lens[sym++] = 8;
- next = fixed;
- lenfix = next;
- bits = 9;
- inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
-
- /* distance table */
- sym = 0;
- while (sym < 32) state->lens[sym++] = 5;
- distfix = next;
- bits = 5;
- inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
-
- /* do this just once */
- virgin = 0;
- }
-#else /* !BUILDFIXED */
-# include "inffixed.h"
-#endif /* BUILDFIXED */
- state->lencode = lenfix;
- state->lenbits = 9;
- state->distcode = distfix;
- state->distbits = 5;
-}
-
-/* Macros for inflateBack(): */
-
-/* Load returned state from inflate_fast() */
-#define LOAD() \
- do { \
- put = strm->next_out; \
- left = strm->avail_out; \
- next = strm->next_in; \
- have = strm->avail_in; \
- hold = state->hold; \
- bits = state->bits; \
- } while (0)
-
-/* Set state from registers for inflate_fast() */
-#define RESTORE() \
- do { \
- strm->next_out = put; \
- strm->avail_out = left; \
- strm->next_in = next; \
- strm->avail_in = have; \
- state->hold = hold; \
- state->bits = bits; \
- } while (0)
-
-/* Clear the input bit accumulator */
-#define INITBITS() \
- do { \
- hold = 0; \
- bits = 0; \
- } while (0)
-
-/* Assure that some input is available. If input is requested, but denied,
- then return a Z_BUF_ERROR from inflateBack(). */
-#define PULL() \
- do { \
- if (have == 0) { \
- have = in(in_desc, &next); \
- if (have == 0) { \
- next = Z_NULL; \
- ret = Z_BUF_ERROR; \
- goto inf_leave; \
- } \
- } \
- } while (0)
-
-/* Get a byte of input into the bit accumulator, or return from inflateBack()
- with an error if there is no input available. */
-#define PULLBYTE() \
- do { \
- PULL(); \
- have--; \
- hold += (unsigned long)(*next++) << bits; \
- bits += 8; \
- } while (0)
-
-/* Assure that there are at least n bits in the bit accumulator. If there is
- not enough available input to do that, then return from inflateBack() with
- an error. */
-#define NEEDBITS(n) \
- do { \
- while (bits < (unsigned)(n)) \
- PULLBYTE(); \
- } while (0)
-
-/* Return the low n bits of the bit accumulator (n < 16) */
-#define BITS(n) \
- ((unsigned)hold & ((1U << (n)) - 1))
-
-/* Remove n bits from the bit accumulator */
-#define DROPBITS(n) \
- do { \
- hold >>= (n); \
- bits -= (unsigned)(n); \
- } while (0)
-
-/* Remove zero to seven bits as needed to go to a byte boundary */
-#define BYTEBITS() \
- do { \
- hold >>= bits & 7; \
- bits -= bits & 7; \
- } while (0)
-
-/* Assure that some output space is available, by writing out the window
- if it's full. If the write fails, return from inflateBack() with a
- Z_BUF_ERROR. */
-#define ROOM() \
- do { \
- if (left == 0) { \
- put = state->window; \
- left = state->wsize; \
- state->whave = left; \
- if (out(out_desc, put, left)) { \
- ret = Z_BUF_ERROR; \
- goto inf_leave; \
- } \
- } \
- } while (0)
-
-/*
- strm provides the memory allocation functions and window buffer on input,
- and provides information on the unused input on return. For Z_DATA_ERROR
- returns, strm will also provide an error message.
-
- in() and out() are the call-back input and output functions. When
- inflateBack() needs more input, it calls in(). When inflateBack() has
- filled the window with output, or when it completes with data in the
- window, it calls out() to write out the data. The application must not
- change the provided input until in() is called again or inflateBack()
- returns. The application must not change the window/output buffer until
- inflateBack() returns.
-
- in() and out() are called with a descriptor parameter provided in the
- inflateBack() call. This parameter can be a structure that provides the
- information required to do the read or write, as well as accumulated
- information on the input and output such as totals and check values.
-
- in() should return zero on failure. out() should return non-zero on
- failure. If either in() or out() fails, than inflateBack() returns a
- Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it
- was in() or out() that caused in the error. Otherwise, inflateBack()
- returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
- error, or Z_MEM_ERROR if it could not allocate memory for the state.
- inflateBack() can also return Z_STREAM_ERROR if the input parameters
- are not correct, i.e. strm is Z_NULL or the state was not initialized.
- */
-int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
-z_streamp strm;
-in_func in;
-void FAR *in_desc;
-out_func out;
-void FAR *out_desc;
-{
- struct inflate_state FAR *state;
- z_const unsigned char FAR *next; /* next input */
- unsigned char FAR *put; /* next output */
- unsigned have, left; /* available input and output */
- unsigned long hold; /* bit buffer */
- unsigned bits; /* bits in bit buffer */
- unsigned copy; /* number of stored or match bytes to copy */
- unsigned char FAR *from; /* where to copy match bytes from */
- code here; /* current decoding table entry */
- code last; /* parent table entry */
- unsigned len; /* length to copy for repeats, bits to drop */
- int ret; /* return code */
- static const unsigned short order[19] = /* permutation of code lengths */
- {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
- /* Check that the strm exists and that the state was initialized */
- if (strm == Z_NULL || strm->state == Z_NULL)
- return Z_STREAM_ERROR;
- state = (struct inflate_state FAR *)strm->state;
-
- /* Reset the state */
- strm->msg = Z_NULL;
- state->mode = TYPE;
- state->last = 0;
- state->whave = 0;
- next = strm->next_in;
- have = next != Z_NULL ? strm->avail_in : 0;
- hold = 0;
- bits = 0;
- put = state->window;
- left = state->wsize;
-
- /* Inflate until end of block marked as last */
- for (;;)
- switch (state->mode) {
- case TYPE:
- /* determine and dispatch block type */
- if (state->last) {
- BYTEBITS();
- state->mode = DONE;
- break;
- }
- NEEDBITS(3);
- state->last = BITS(1);
- DROPBITS(1);
- switch (BITS(2)) {
- case 0: /* stored block */
- Tracev((stderr, "inflate: stored block%s\n",
- state->last ? " (last)" : ""));
- state->mode = STORED;
- break;
- case 1: /* fixed block */
- fixedtables(state);
- Tracev((stderr, "inflate: fixed codes block%s\n",
- state->last ? " (last)" : ""));
- state->mode = LEN; /* decode codes */
- break;
- case 2: /* dynamic block */
- Tracev((stderr, "inflate: dynamic codes block%s\n",
- state->last ? " (last)" : ""));
- state->mode = TABLE;
- break;
- case 3:
- strm->msg = (char *)"invalid block type";
- state->mode = BAD;
- }
- DROPBITS(2);
- break;
-
- case STORED:
- /* get and verify stored block length */
- BYTEBITS(); /* go to byte boundary */
- NEEDBITS(32);
- if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
- strm->msg = (char *)"invalid stored block lengths";
- state->mode = BAD;
- break;
- }
- state->length = (unsigned)hold & 0xffff;
- Tracev((stderr, "inflate: stored length %u\n",
- state->length));
- INITBITS();
-
- /* copy stored block from input to output */
- while (state->length != 0) {
- copy = state->length;
- PULL();
- ROOM();
- if (copy > have) copy = have;
- if (copy > left) copy = left;
- zmemcpy(put, next, copy);
- have -= copy;
- next += copy;
- left -= copy;
- put += copy;
- state->length -= copy;
- }
- Tracev((stderr, "inflate: stored end\n"));
- state->mode = TYPE;
- break;
-
- case TABLE:
- /* get dynamic table entries descriptor */
- NEEDBITS(14);
- state->nlen = BITS(5) + 257;
- DROPBITS(5);
- state->ndist = BITS(5) + 1;
- DROPBITS(5);
- state->ncode = BITS(4) + 4;
- DROPBITS(4);
-#ifndef PKZIP_BUG_WORKAROUND
- if (state->nlen > 286 || state->ndist > 30) {
- strm->msg = (char *)"too many length or distance symbols";
- state->mode = BAD;
- break;
- }
-#endif
- Tracev((stderr, "inflate: table sizes ok\n"));
-
- /* get code length code lengths (not a typo) */
- state->have = 0;
- while (state->have < state->ncode) {
- NEEDBITS(3);
- state->lens[order[state->have++]] = (unsigned short)BITS(3);
- DROPBITS(3);
- }
- while (state->have < 19)
- state->lens[order[state->have++]] = 0;
- state->next = state->codes;
- state->lencode = (code const FAR *)(state->next);
- state->lenbits = 7;
- ret = inflate_table(CODES, state->lens, 19, &(state->next),
- &(state->lenbits), state->work);
- if (ret) {
- strm->msg = (char *)"invalid code lengths set";
- state->mode = BAD;
- break;
- }
- Tracev((stderr, "inflate: code lengths ok\n"));
-
- /* get length and distance code code lengths */
- state->have = 0;
- while (state->have < state->nlen + state->ndist) {
- for (;;) {
- here = state->lencode[BITS(state->lenbits)];
- if ((unsigned)(here.bits) <= bits) break;
- PULLBYTE();
- }
- if (here.val < 16) {
- DROPBITS(here.bits);
- state->lens[state->have++] = here.val;
- }
- else {
- if (here.val == 16) {
- NEEDBITS(here.bits + 2);
- DROPBITS(here.bits);
- if (state->have == 0) {
- strm->msg = (char *)"invalid bit length repeat";
- state->mode = BAD;
- break;
- }
- len = (unsigned)(state->lens[state->have - 1]);
- copy = 3 + BITS(2);
- DROPBITS(2);
- }
- else if (here.val == 17) {
- NEEDBITS(here.bits + 3);
- DROPBITS(here.bits);
- len = 0;
- copy = 3 + BITS(3);
- DROPBITS(3);
- }
- else {
- NEEDBITS(here.bits + 7);
- DROPBITS(here.bits);
- len = 0;
- copy = 11 + BITS(7);
- DROPBITS(7);
- }
- if (state->have + copy > state->nlen + state->ndist) {
- strm->msg = (char *)"invalid bit length repeat";
- state->mode = BAD;
- break;
- }
- while (copy--)
- state->lens[state->have++] = (unsigned short)len;
- }
- }
-
- /* handle error breaks in while */
- if (state->mode == BAD) break;
-
- /* check for end-of-block code (better have one) */
- if (state->lens[256] == 0) {
- strm->msg = (char *)"invalid code -- missing end-of-block";
- state->mode = BAD;
- break;
- }
-
- /* build code tables -- note: do not change the lenbits or distbits
- values here (9 and 6) without reading the comments in inftrees.h
- concerning the ENOUGH constants, which depend on those values */
- state->next = state->codes;
- state->lencode = (code const FAR *)(state->next);
- state->lenbits = 9;
- ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
- &(state->lenbits), state->work);
- if (ret) {
- strm->msg = (char *)"invalid literal/lengths set";
- state->mode = BAD;
- break;
- }
- state->distcode = (code const FAR *)(state->next);
- state->distbits = 6;
- ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
- &(state->next), &(state->distbits), state->work);
- if (ret) {
- strm->msg = (char *)"invalid distances set";
- state->mode = BAD;
- break;
- }
- Tracev((stderr, "inflate: codes ok\n"));
- state->mode = LEN;
-
- case LEN:
- /* use inflate_fast() if we have enough input and output */
- if (have >= 6 && left >= 258) {
- RESTORE();
- if (state->whave < state->wsize)
- state->whave = state->wsize - left;
- inflate_fast(strm, state->wsize);
- LOAD();
- break;
- }
-
- /* get a literal, length, or end-of-block code */
- for (;;) {
- here = state->lencode[BITS(state->lenbits)];
- if ((unsigned)(here.bits) <= bits) break;
- PULLBYTE();
- }
- if (here.op && (here.op & 0xf0) == 0) {
- last = here;
- for (;;) {
- here = state->lencode[last.val +
- (BITS(last.bits + last.op) >> last.bits)];
- if ((unsigned)(last.bits + here.bits) <= bits) break;
- PULLBYTE();
- }
- DROPBITS(last.bits);
- }
- DROPBITS(here.bits);
- state->length = (unsigned)here.val;
-
- /* process literal */
- if (here.op == 0) {
- Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
- "inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", here.val));
- ROOM();
- *put++ = (unsigned char)(state->length);
- left--;
- state->mode = LEN;
- break;
- }
-
- /* process end of block */
- if (here.op & 32) {
- Tracevv((stderr, "inflate: end of block\n"));
- state->mode = TYPE;
- break;
- }
-
- /* invalid code */
- if (here.op & 64) {
- strm->msg = (char *)"invalid literal/length code";
- state->mode = BAD;
- break;
- }
-
- /* length code -- get extra bits, if any */
- state->extra = (unsigned)(here.op) & 15;
- if (state->extra != 0) {
- NEEDBITS(state->extra);
- state->length += BITS(state->extra);
- DROPBITS(state->extra);
- }
- Tracevv((stderr, "inflate: length %u\n", state->length));
-
- /* get distance code */
- for (;;) {
- here = state->distcode[BITS(state->distbits)];
- if ((unsigned)(here.bits) <= bits) break;
- PULLBYTE();
- }
- if ((here.op & 0xf0) == 0) {
- last = here;
- for (;;) {
- here = state->distcode[last.val +
- (BITS(last.bits + last.op) >> last.bits)];
- if ((unsigned)(last.bits + here.bits) <= bits) break;
- PULLBYTE();
- }
- DROPBITS(last.bits);
- }
- DROPBITS(here.bits);
- if (here.op & 64) {
- strm->msg = (char *)"invalid distance code";
- state->mode = BAD;
- break;
- }
- state->offset = (unsigned)here.val;
-
- /* get distance extra bits, if any */
- state->extra = (unsigned)(here.op) & 15;
- if (state->extra != 0) {
- NEEDBITS(state->extra);
- state->offset += BITS(state->extra);
- DROPBITS(state->extra);
- }
- if (state->offset > state->wsize - (state->whave < state->wsize ?
- left : 0)) {
- strm->msg = (char *)"invalid distance too far back";
- state->mode = BAD;
- break;
- }
- Tracevv((stderr, "inflate: distance %u\n", state->offset));
-
- /* copy match from window to output */
- do {
- ROOM();
- copy = state->wsize - state->offset;
- if (copy < left) {
- from = put + copy;
- copy = left - copy;
- }
- else {
- from = put - state->offset;
- copy = left;
- }
- if (copy > state->length) copy = state->length;
- state->length -= copy;
- left -= copy;
- do {
- *put++ = *from++;
- } while (--copy);
- } while (state->length != 0);
- break;
-
- case DONE:
- /* inflate stream terminated properly -- write leftover output */
- ret = Z_STREAM_END;
- if (left < state->wsize) {
- if (out(out_desc, state->window, state->wsize - left))
- ret = Z_BUF_ERROR;
- }
- goto inf_leave;
-
- case BAD:
- ret = Z_DATA_ERROR;
- goto inf_leave;
-
- default: /* can't happen, but makes compilers happy */
- ret = Z_STREAM_ERROR;
- goto inf_leave;
- }
-
- /* Return unused input */
- inf_leave:
- strm->next_in = next;
- strm->avail_in = have;
- return ret;
-}
-
-int ZEXPORT inflateBackEnd(strm)
-z_streamp strm;
-{
- if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
- return Z_STREAM_ERROR;
- ZFREE(strm, strm->state);
- strm->state = Z_NULL;
- Tracev((stderr, "inflate: end\n"));
- return Z_OK;
-}