diff options
Diffstat (limited to 'third_party/aom/build/make/Makefile')
| -rw-r--r-- | third_party/aom/build/make/Makefile | 466 |
1 files changed, 0 insertions, 466 deletions
diff --git a/third_party/aom/build/make/Makefile b/third_party/aom/build/make/Makefile deleted file mode 100644 index 0b869db0a..000000000 --- a/third_party/aom/build/make/Makefile +++ /dev/null @@ -1,466 +0,0 @@ -## Copyright (c) 2016, Alliance for Open Media. All rights reserved -## -## This source code is subject to the terms of the BSD 2 Clause License and -## the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License -## was not distributed with this source code in the LICENSE file, you can -## obtain it at www.aomedia.org/license/software. If the Alliance for Open -## Media Patent License 1.0 was not distributed with this source code in the -## PATENTS file, you can obtain it at www.aomedia.org/license/patent. -## - - -include config.mk -quiet?=true -ifeq ($(target),) -# If a target wasn't specified, invoke for all enabled targets. -.DEFAULT: - @for t in $(ALL_TARGETS); do \ - $(MAKE) --no-print-directory target=$$t $(MAKECMDGOALS) || exit $$?;\ - done -all: .DEFAULT -clean:: .DEFAULT -exampletest: .DEFAULT -install:: .DEFAULT -test:: .DEFAULT -test-no-data-check:: .DEFAULT -testdata:: .DEFAULT -utiltest: .DEFAULT -exampletest-no-data-check utiltest-no-data-check: .DEFAULT -test_%: .DEFAULT ; - -# Note: md5sum is not installed on OS X, but openssl is. Openssl may not be -# installed on cygwin, so we need to autodetect here. -md5sum := $(firstword $(wildcard \ - $(foreach e,md5sum openssl,\ - $(foreach p,$(subst :, ,$(PATH)),$(p)/$(e)*))\ - )) -md5sum := $(if $(filter %openssl,$(md5sum)),$(md5sum) dgst -md5,$(md5sum)) - -TGT_CC:=$(word 3, $(subst -, ,$(TOOLCHAIN))) -dist: - @for t in $(ALL_TARGETS); do \ - $(MAKE) --no-print-directory target=$$t $(MAKECMDGOALS) || exit $$?;\ - done - # Run configure for the user with the current toolchain. - @if [ -d "$(DIST_DIR)/src" ]; then \ - mkdir -p "$(DIST_DIR)/build"; \ - cd "$(DIST_DIR)/build"; \ - echo "Rerunning configure $(CONFIGURE_ARGS)"; \ - ../src/configure $(CONFIGURE_ARGS); \ - $(if $(filter vs%,$(TGT_CC)),make NO_LAUNCH_DEVENV=1;) \ - fi - @if [ -d "$(DIST_DIR)" ]; then \ - echo " [MD5SUM] $(DIST_DIR)"; \ - cd $(DIST_DIR) && \ - $(md5sum) `find . -name md5sums.txt -prune -o -type f -print` \ - | sed -e 's/MD5(\(.*\))= \([0-9a-f]\{32\}\)/\2 \1/' \ - > md5sums.txt;\ - fi -endif - -# Since we invoke make recursively for multiple targets we need to include the -# .mk file for the correct target, but only when $(target) is non-empty. -ifneq ($(target),) -include $(target)-$(TOOLCHAIN).mk -endif -BUILD_ROOT?=. -VPATH=$(SRC_PATH_BARE) -CFLAGS+=-I$(BUILD_PFX)$(BUILD_ROOT) -I$(SRC_PATH) -CXXFLAGS+=-I$(BUILD_PFX)$(BUILD_ROOT) -I$(SRC_PATH) -ASFLAGS+=-I$(BUILD_PFX)$(BUILD_ROOT)/ -I$(SRC_PATH)/ -DIST_DIR?=dist -HOSTCC?=gcc -TGT_ISA:=$(word 1, $(subst -, ,$(TOOLCHAIN))) -TGT_OS:=$(word 2, $(subst -, ,$(TOOLCHAIN))) -TGT_CC:=$(word 3, $(subst -, ,$(TOOLCHAIN))) -quiet:=$(if $(or $(verbose), $(V)),, yes) -qexec=$(if $(quiet),@) - -# Cancel built-in implicit rules -%: %.o -%.asm: -%.a: -%: %.cc - -# -# Common rules" -# -.PHONY: all -all: - -.PHONY: clean -clean:: - rm -f $(OBJS-yes) $(OBJS-yes:.o=.d) $(OBJS-yes:.asm.s.o=.asm.s) - rm -f $(CLEAN-OBJS) - -.PHONY: clean -distclean: clean - if [ -z "$(target)" ]; then \ - rm -f Makefile; \ - rm -f config.log config.mk; \ - rm -f aom_config.[hc] aom_config.asm; \ - else \ - rm -f $(target)-$(TOOLCHAIN).mk; \ - fi - -.PHONY: dist -dist: -.PHONY: exampletest -exampletest: -.PHONY: install -install:: -.PHONY: test -test:: -.PHONY: testdata -testdata:: -.PHONY: utiltest -utiltest: -.PHONY: test-no-data-check exampletest-no-data-check utiltest-no-data-check -test-no-data-check:: -exampletest-no-data-check utiltest-no-data-check: - -# Force to realign stack always on OS/2 -ifeq ($(TOOLCHAIN), x86-os2-gcc) -CFLAGS += -mstackrealign -endif - -$(BUILD_PFX)%_mmx.c.d: CFLAGS += -mmmx -$(BUILD_PFX)%_mmx.c.o: CFLAGS += -mmmx -$(BUILD_PFX)%_sse2.c.d: CFLAGS += -msse2 -$(BUILD_PFX)%_sse2.c.o: CFLAGS += -msse2 -$(BUILD_PFX)%_sse3.c.d: CFLAGS += -msse3 -$(BUILD_PFX)%_sse3.c.o: CFLAGS += -msse3 -$(BUILD_PFX)%_ssse3.c.d: CFLAGS += -mssse3 -$(BUILD_PFX)%_ssse3.c.o: CFLAGS += -mssse3 -$(BUILD_PFX)%_sse4.c.d: CFLAGS += -msse4.1 -$(BUILD_PFX)%_sse4.c.o: CFLAGS += -msse4.1 -$(BUILD_PFX)%_avx.c.d: CFLAGS += -mavx -$(BUILD_PFX)%_avx.c.o: CFLAGS += -mavx -$(BUILD_PFX)%_avx2.c.d: CFLAGS += -mavx2 -$(BUILD_PFX)%_avx2.c.o: CFLAGS += -mavx2 -$(BUILD_PFX)%_mmx.cc.d: CXXFLAGS += -mmmx -$(BUILD_PFX)%_mmx.cc.o: CXXFLAGS += -mmmx -$(BUILD_PFX)%_sse2.cc.d: CXXFLAGS += -msse2 -$(BUILD_PFX)%_sse2.cc.o: CXXFLAGS += -msse2 -$(BUILD_PFX)%_sse3.cc.d: CXXFLAGS += -msse3 -$(BUILD_PFX)%_sse3.cc.o: CXXFLAGS += -msse3 -$(BUILD_PFX)%_ssse3.cc.d: CXXFLAGS += -mssse3 -$(BUILD_PFX)%_ssse3.cc.o: CXXFLAGS += -mssse3 -$(BUILD_PFX)%_sse4.cc.d: CXXFLAGS += -msse4.1 -$(BUILD_PFX)%_sse4.cc.o: CXXFLAGS += -msse4.1 -$(BUILD_PFX)%_avx.cc.d: CXXFLAGS += -mavx -$(BUILD_PFX)%_avx.cc.o: CXXFLAGS += -mavx -$(BUILD_PFX)%_avx2.cc.d: CXXFLAGS += -mavx2 -$(BUILD_PFX)%_avx2.cc.o: CXXFLAGS += -mavx2 - -$(BUILD_PFX)%.c.d: %.c - $(if $(quiet),@echo " [DEP] $@") - $(qexec)mkdir -p $(dir $@) - $(qexec)$(CC) $(INTERNAL_CFLAGS) $(CFLAGS) -M $< | $(fmt_deps) > $@ - -$(BUILD_PFX)%.c.o: %.c - $(if $(quiet),@echo " [CC] $@") - $(qexec)$(if $(CONFIG_DEPENDENCY_TRACKING),,mkdir -p $(dir $@)) - $(qexec)$(CC) $(INTERNAL_CFLAGS) $(CFLAGS) -c -o $@ $< - -$(BUILD_PFX)%.cc.d: %.cc - $(if $(quiet),@echo " [DEP] $@") - $(qexec)mkdir -p $(dir $@) - $(qexec)$(CXX) $(INTERNAL_CFLAGS) $(CXXFLAGS) -M $< | $(fmt_deps) > $@ - -$(BUILD_PFX)%.cc.o: %.cc - $(if $(quiet),@echo " [CXX] $@") - $(qexec)$(if $(CONFIG_DEPENDENCY_TRACKING),,mkdir -p $(dir $@)) - $(qexec)$(CXX) $(INTERNAL_CFLAGS) $(CXXFLAGS) -c -o $@ $< - -$(BUILD_PFX)%.cpp.d: %.cpp - $(if $(quiet),@echo " [DEP] $@") - $(qexec)mkdir -p $(dir $@) - $(qexec)$(CXX) $(INTERNAL_CFLAGS) $(CXXFLAGS) -M $< | $(fmt_deps) > $@ - -$(BUILD_PFX)%.cpp.o: %.cpp - $(if $(quiet),@echo " [CXX] $@") - $(qexec)$(if $(CONFIG_DEPENDENCY_TRACKING),,mkdir -p $(dir $@)) - $(qexec)$(CXX) $(INTERNAL_CFLAGS) $(CXXFLAGS) -c -o $@ $< - -$(BUILD_PFX)%.asm.d: %.asm - $(if $(quiet),@echo " [DEP] $@") - $(qexec)mkdir -p $(dir $@) - $(qexec)$(SRC_PATH_BARE)/build/make/gen_asm_deps.sh \ - --build-pfx=$(BUILD_PFX) --depfile=$@ $(ASFLAGS) $< > $@ - -$(BUILD_PFX)%.asm.o: %.asm - $(if $(quiet),@echo " [AS] $@") - $(qexec)$(if $(CONFIG_DEPENDENCY_TRACKING),,mkdir -p $(dir $@)) - $(qexec)$(AS) $(ASFLAGS) -o $@ $< - -$(BUILD_PFX)%.s.d: %.s - $(if $(quiet),@echo " [DEP] $@") - $(qexec)mkdir -p $(dir $@) - $(qexec)$(SRC_PATH_BARE)/build/make/gen_asm_deps.sh \ - --build-pfx=$(BUILD_PFX) --depfile=$@ $(ASFLAGS) $< > $@ - -$(BUILD_PFX)%.s.o: %.s - $(if $(quiet),@echo " [AS] $@") - $(qexec)$(if $(CONFIG_DEPENDENCY_TRACKING),,mkdir -p $(dir $@)) - $(qexec)$(AS) $(ASFLAGS) -o $@ $< - -.PRECIOUS: %.c.S -%.c.S: CFLAGS += -DINLINE_ASM -$(BUILD_PFX)%.c.S: %.c - $(if $(quiet),@echo " [GEN] $@") - $(qexec)$(if $(CONFIG_DEPENDENCY_TRACKING),,mkdir -p $(dir $@)) - $(qexec)$(CC) -S $(CFLAGS) -o $@ $< - -.PRECIOUS: %.asm.s -$(BUILD_PFX)%.asm.s: %.asm - $(if $(quiet),@echo " [ASM CONVERSION] $@") - $(qexec)mkdir -p $(dir $@) - $(qexec)$(ASM_CONVERSION) <$< >$@ - -# If we're in debug mode, pretend we don't have GNU strip, to fall back to -# the copy implementation -HAVE_GNU_STRIP := $(if $(CONFIG_DEBUG),,$(HAVE_GNU_STRIP)) -ifeq ($(HAVE_GNU_STRIP),yes) -# Older binutils strip global symbols not needed for relocation processing -# when given --strip-unneeded. Using nm and awk to identify globals and -# keep them caused command line length issues under mingw and segfaults in -# test_libaom were observed under OS/2: simply use --strip-debug. -%.a: %_g.a - $(if $(quiet),@echo " [STRIP] $@ < $<") - $(qexec)$(STRIP) --strip-debug \ - -o $@ $< -else -%.a: %_g.a - $(if $(quiet),@echo " [CP] $@ < $<") - $(qexec)cp $< $@ -endif - -# -# Utility functions -# -pairmap=$(if $(strip $(2)),\ - $(call $(1),$(word 1,$(2)),$(word 2,$(2)))\ - $(call pairmap,$(1),$(wordlist 3,$(words $(2)),$(2)))\ -) - -enabled=$(filter-out $($(1)-no),$($(1)-yes)) -cond_enabled=$(if $(filter yes,$($(1))), $(call enabled,$(2))) - -find_file1=$(word 1,$(wildcard $(subst //,/,$(addsuffix /$(1),$(2))))) -find_file=$(foreach f,$(1),$(call find_file1,$(strip $(f)),$(strip $(2))) ) -obj_pats=.c=.c.o $(AS_SFX)=$(AS_SFX).o .cc=.cc.o .cpp=.cpp.o -objs=$(addprefix $(BUILD_PFX),$(foreach p,$(obj_pats),$(filter %.o,$(1:$(p))) )) - -install_map_templates=$(eval $(call install_map_template,$(1),$(2))) - -not=$(subst yes,no,$(1)) - -ifeq ($(CONFIG_MSVS),yes) -lib_file_name=$(1).lib -else -lib_file_name=lib$(1).a -endif -# -# Rule Templates -# -define linker_template -$(1): $(filter-out -%,$(2)) -$(1): - $(if $(quiet),@echo " [LD] $$@") - $(qexec)$$(LD) $$(strip $$(INTERNAL_LDFLAGS) $$(LDFLAGS) -o $$@ $(2) $(3) $$(extralibs)) -endef -define linkerxx_template -$(1): $(filter-out -%,$(2)) -$(1): - $(if $(quiet),@echo " [LD] $$@") - $(qexec)$$(CXX) $$(strip $$(INTERNAL_LDFLAGS) $$(LDFLAGS) -o $$@ $(2) $(3) $$(extralibs)) -endef -# make-3.80 has a bug with expanding large input strings to the eval function, -# which was triggered in some cases by the following component of -# linker_template: -# $(1): $$(call find_file, $(patsubst -l%,lib%.a,$(filter -l%,$(2))),\ -# $$(patsubst -L%,%,$$(filter -L%,$$(LDFLAGS) $(2)))) -# This may be useful to revisit in the future (it tries to locate libraries -# in a search path and add them as prerequisites - -define install_map_template -$(DIST_DIR)/$(1): $(2) - $(if $(quiet),@echo " [INSTALL] $$@") - $(qexec)mkdir -p $$(dir $$@) - $(qexec)cp -p $$< $$@ -endef - -define archive_template -# Not using a pattern rule here because we don't want to generate empty -# archives when they are listed as a dependency in files not responsible -# for creating them. -$(1): - $(if $(quiet),@echo " [AR] $$@") - $(qexec)$$(AR) $$(ARFLAGS) $$@ $$^ -endef - -define so_template -# Not using a pattern rule here because we don't want to generate empty -# archives when they are listed as a dependency in files not responsible -# for creating them. -# -# This needs further abstraction for dealing with non-GNU linkers. -$(1): - $(if $(quiet),@echo " [LD] $$@") - $(qexec)$$(LD) -shared $$(LDFLAGS) \ - -Wl,--no-undefined -Wl,-soname,$$(SONAME) \ - -Wl,--version-script,$$(EXPORTS_FILE) -o $$@ \ - $$(filter %.o,$$^) $$(extralibs) -endef - -define dl_template -# Not using a pattern rule here because we don't want to generate empty -# archives when they are listed as a dependency in files not responsible -# for creating them. -$(1): - $(if $(quiet),@echo " [LD] $$@") - $(qexec)$$(LD) -dynamiclib $$(LDFLAGS) \ - -exported_symbols_list $$(EXPORTS_FILE) \ - -Wl,-headerpad_max_install_names,-compatibility_version,1.0,-current_version,$$(VERSION_MAJOR) \ - -o $$@ \ - $$(filter %.o,$$^) $$(extralibs) -endef - -define dll_template -# Not using a pattern rule here because we don't want to generate empty -# archives when they are listed as a dependency in files not responsible -# for creating them. -$(1): - $(if $(quiet),@echo " [LD] $$@") - $(qexec)$$(LD) -Zdll $$(LDFLAGS) \ - -o $$@ \ - $$(filter %.o,$$^) $$(extralibs) $$(EXPORTS_FILE) -endef - - -# -# Get current configuration -# -ifneq ($(target),) -include $(SRC_PATH_BARE)/$(target:-$(TOOLCHAIN)=).mk -endif - -skip_deps := $(filter %clean,$(MAKECMDGOALS)) -skip_deps += $(findstring testdata,$(MAKECMDGOALS)) -ifeq ($(strip $(skip_deps)),) - ifeq ($(CONFIG_DEPENDENCY_TRACKING),yes) - # Older versions of make don't like -include directives with no arguments - ifneq ($(filter %.d,$(OBJS-yes:.o=.d)),) - -include $(filter %.d,$(OBJS-yes:.o=.d)) - endif - endif -endif - -# -# Configuration dependent rules -# -$(call pairmap,install_map_templates,$(INSTALL_MAPS)) - -DOCS=$(call cond_enabled,CONFIG_INSTALL_DOCS,DOCS) -.docs: $(DOCS) - @touch $@ - -INSTALL-DOCS=$(call cond_enabled,CONFIG_INSTALL_DOCS,INSTALL-DOCS) -ifeq ($(MAKECMDGOALS),dist) -INSTALL-DOCS+=$(call cond_enabled,CONFIG_INSTALL_DOCS,DIST-DOCS) -endif -.install-docs: .docs $(addprefix $(DIST_DIR)/,$(INSTALL-DOCS)) - @touch $@ - -clean:: - rm -f .docs .install-docs $(DOCS) - -BINS=$(call enabled,BINS) -.bins: $(BINS) - @touch $@ - -INSTALL-BINS=$(call cond_enabled,CONFIG_INSTALL_BINS,INSTALL-BINS) -ifeq ($(MAKECMDGOALS),dist) -INSTALL-BINS+=$(call cond_enabled,CONFIG_INSTALL_BINS,DIST-BINS) -endif -.install-bins: .bins $(addprefix $(DIST_DIR)/,$(INSTALL-BINS)) - @touch $@ - -clean:: - rm -f .bins .install-bins $(BINS) - -LIBS=$(call enabled,LIBS) -.libs: $(LIBS) - @touch $@ -$(foreach lib,$(filter %_g.a,$(LIBS)),$(eval $(call archive_template,$(lib)))) -$(foreach lib,$(filter %so.$(SO_VERSION_MAJOR).$(SO_VERSION_MINOR).$(SO_VERSION_PATCH),$(LIBS)),$(eval $(call so_template,$(lib)))) -$(foreach lib,$(filter %$(SO_VERSION_MAJOR).dylib,$(LIBS)),$(eval $(call dl_template,$(lib)))) -$(foreach lib,$(filter %$(SO_VERSION_MAJOR).dll,$(LIBS)),$(eval $(call dll_template,$(lib)))) - -INSTALL-LIBS=$(call cond_enabled,CONFIG_INSTALL_LIBS,INSTALL-LIBS) -ifeq ($(MAKECMDGOALS),dist) -INSTALL-LIBS+=$(call cond_enabled,CONFIG_INSTALL_LIBS,DIST-LIBS) -endif -.install-libs: .libs $(addprefix $(DIST_DIR)/,$(INSTALL-LIBS)) - @touch $@ - -clean:: - rm -f .libs .install-libs $(LIBS) - -ifeq ($(CONFIG_EXTERNAL_BUILD),yes) -PROJECTS=$(call enabled,PROJECTS) -.projects: $(PROJECTS) - @touch $@ - -INSTALL-PROJECTS=$(call cond_enabled,CONFIG_INSTALL_PROJECTS,INSTALL-PROJECTS) -ifeq ($(MAKECMDGOALS),dist) -INSTALL-PROJECTS+=$(call cond_enabled,CONFIG_INSTALL_PROJECTS,DIST-PROJECTS) -endif -.install-projects: .projects $(addprefix $(DIST_DIR)/,$(INSTALL-PROJECTS)) - @touch $@ - -clean:: - rm -f .projects .install-projects $(PROJECTS) -endif - -# If there are any source files to be distributed, then include the build -# system too. -ifneq ($(call enabled,DIST-SRCS),) - DIST-SRCS-yes += configure - DIST-SRCS-yes += build/make/configure.sh - DIST-SRCS-yes += build/make/gen_asm_deps.sh - DIST-SRCS-yes += build/make/Makefile - DIST-SRCS-$(CONFIG_MSVS) += build/make/gen_msvs_def.sh - DIST-SRCS-$(CONFIG_MSVS) += build/make/gen_msvs_sln.sh - DIST-SRCS-$(CONFIG_MSVS) += build/make/gen_msvs_vcxproj.sh - DIST-SRCS-$(CONFIG_MSVS) += build/make/msvs_common.sh - DIST-SRCS-$(CONFIG_RVCT) += build/make/armlink_adapter.sh - DIST-SRCS-$(ARCH_ARM) += build/make/ads2gas.pl - DIST-SRCS-$(ARCH_ARM) += build/make/ads2gas_apple.pl - DIST-SRCS-$(ARCH_ARM) += build/make/ads2armasm_ms.pl - DIST-SRCS-$(ARCH_ARM) += build/make/thumb.pm - DIST-SRCS-yes += $(target:-$(TOOLCHAIN)=).mk -endif -INSTALL-SRCS := $(call cond_enabled,CONFIG_INSTALL_SRCS,INSTALL-SRCS) -ifeq ($(MAKECMDGOALS),dist) -INSTALL-SRCS += $(call cond_enabled,CONFIG_INSTALL_SRCS,DIST-SRCS) -endif -.install-srcs: $(addprefix $(DIST_DIR)/src/,$(INSTALL-SRCS)) - @touch $@ - -clean:: - rm -f .install-srcs - -ifeq ($(CONFIG_EXTERNAL_BUILD),yes) - BUILD_TARGETS += .projects - INSTALL_TARGETS += .install-projects -endif -BUILD_TARGETS += .docs .libs .bins -INSTALL_TARGETS += .install-docs .install-srcs .install-libs .install-bins -all: $(BUILD_TARGETS) -install:: $(INSTALL_TARGETS) -dist: $(INSTALL_TARGETS) -test:: - -.SUFFIXES: # Delete default suffix rules |