summaryrefslogtreecommitdiffstats
path: root/security/nss/lib/ssl/ssl3con.c
diff options
context:
space:
mode:
Diffstat (limited to 'security/nss/lib/ssl/ssl3con.c')
-rw-r--r--security/nss/lib/ssl/ssl3con.c430
1 files changed, 229 insertions, 201 deletions
diff --git a/security/nss/lib/ssl/ssl3con.c b/security/nss/lib/ssl/ssl3con.c
index 2593bbacc..466fc296f 100644
--- a/security/nss/lib/ssl/ssl3con.c
+++ b/security/nss/lib/ssl/ssl3con.c
@@ -990,27 +990,22 @@ ssl_ClientReadVersion(sslSocket *ss, PRUint8 **b, unsigned int *len,
if (rv != SECSuccess) {
return SECFailure; /* alert has been sent */
}
-
-#ifdef TLS_1_3_DRAFT_VERSION
- if (temp == SSL_LIBRARY_VERSION_TLS_1_3) {
- (void)SSL3_SendAlert(ss, alert_fatal, protocol_version);
- PORT_SetError(SSL_ERROR_UNSUPPORTED_VERSION);
- return SECFailure;
- }
- if (temp == tls13_EncodeDraftVersion(SSL_LIBRARY_VERSION_TLS_1_3)) {
- v = SSL_LIBRARY_VERSION_TLS_1_3;
- } else {
- v = (SSL3ProtocolVersion)temp;
- }
-#else
v = (SSL3ProtocolVersion)temp;
-#endif
if (IS_DTLS(ss)) {
- /* If this fails, we get 0 back and the next check to fails. */
v = dtls_DTLSVersionToTLSVersion(v);
+ /* Check for failure. */
+ if (!v || v > SSL_LIBRARY_VERSION_MAX_SUPPORTED) {
+ SSL3_SendAlert(ss, alert_fatal, illegal_parameter);
+ return SECFailure;
+ }
}
+ /* You can't negotiate TLS 1.3 this way. */
+ if (v >= SSL_LIBRARY_VERSION_TLS_1_3) {
+ SSL3_SendAlert(ss, alert_fatal, illegal_parameter);
+ return SECFailure;
+ }
*version = v;
return SECSuccess;
}
@@ -1415,7 +1410,7 @@ ssl3_SetupPendingCipherSpec(sslSocket *ss, CipherSpecDirection direction,
spec->macDef = ssl_GetMacDef(ss, suiteDef);
spec->epoch = prev->epoch + 1;
- spec->seqNum = 0;
+ spec->nextSeqNum = 0;
if (IS_DTLS(ss) && direction == CipherSpecRead) {
dtls_InitRecvdRecords(&spec->recvdRecords);
}
@@ -1481,6 +1476,13 @@ ssl3_SetupBothPendingCipherSpecs(sslSocket *ss)
goto loser;
}
+ if (ssl3_ExtensionNegotiated(ss, ssl_record_size_limit_xtn)) {
+ ss->ssl3.prSpec->recordSizeLimit = PR_MIN(MAX_FRAGMENT_LENGTH,
+ ss->opt.recordSizeLimit);
+ ss->ssl3.pwSpec->recordSizeLimit = PR_MIN(MAX_FRAGMENT_LENGTH,
+ ss->xtnData.recordSizeLimit);
+ }
+
ssl_ReleaseSpecWriteLock(ss); /*******************************/
return SECSuccess;
@@ -2004,6 +2006,7 @@ ssl3_MACEncryptRecord(ssl3CipherSpec *cwSpec,
unsigned int ivLen = 0;
unsigned char pseudoHeaderBuf[13];
sslBuffer pseudoHeader = SSL_BUFFER(pseudoHeaderBuf);
+ int len;
if (cwSpec->cipherDef->type == type_block &&
cwSpec->version >= SSL_LIBRARY_VERSION_TLS_1_1) {
@@ -2013,29 +2016,32 @@ ssl3_MACEncryptRecord(ssl3CipherSpec *cwSpec,
* record.
*/
ivLen = cwSpec->cipherDef->iv_size;
- if (ivLen > wrBuf->space) {
+ if (ivLen > SSL_BUFFER_SPACE(wrBuf)) {
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
return SECFailure;
}
- rv = PK11_GenerateRandom(wrBuf->buf, ivLen);
+ rv = PK11_GenerateRandom(SSL_BUFFER_NEXT(wrBuf), ivLen);
if (rv != SECSuccess) {
ssl_MapLowLevelError(SSL_ERROR_GENERATE_RANDOM_FAILURE);
return rv;
}
rv = cwSpec->cipher(cwSpec->cipherContext,
- wrBuf->buf, /* output */
- (int *)&wrBuf->len, /* outlen */
- ivLen, /* max outlen */
- wrBuf->buf, /* input */
- ivLen); /* input len */
- if (rv != SECSuccess || wrBuf->len != ivLen) {
+ SSL_BUFFER_NEXT(wrBuf), /* output */
+ &len, /* outlen */
+ ivLen, /* max outlen */
+ SSL_BUFFER_NEXT(wrBuf), /* input */
+ ivLen); /* input len */
+ if (rv != SECSuccess || len != ivLen) {
PORT_SetError(SSL_ERROR_ENCRYPTION_FAILURE);
return SECFailure;
}
+
+ rv = sslBuffer_Skip(wrBuf, len, NULL);
+ PORT_Assert(rv == SECSuccess); /* Can't fail. */
}
rv = ssl3_BuildRecordPseudoHeader(
- cwSpec->epoch, cwSpec->seqNum, type,
+ cwSpec->epoch, cwSpec->nextSeqNum, type,
cwSpec->version >= SSL_LIBRARY_VERSION_TLS_1_0, cwSpec->recordVersion,
isDTLS, contentLen, &pseudoHeader);
PORT_Assert(rv == SECSuccess);
@@ -2043,23 +2049,26 @@ ssl3_MACEncryptRecord(ssl3CipherSpec *cwSpec,
const int nonceLen = cwSpec->cipherDef->explicit_nonce_size;
const int tagLen = cwSpec->cipherDef->tag_size;
- if (nonceLen + contentLen + tagLen > wrBuf->space) {
+ if (nonceLen + contentLen + tagLen > SSL_BUFFER_SPACE(wrBuf)) {
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
return SECFailure;
}
rv = cwSpec->aead(
&cwSpec->keyMaterial,
- PR_FALSE, /* do encrypt */
- wrBuf->buf, /* output */
- (int *)&wrBuf->len, /* out len */
- wrBuf->space, /* max out */
- pIn, contentLen, /* input */
+ PR_FALSE, /* do encrypt */
+ SSL_BUFFER_NEXT(wrBuf), /* output */
+ &len, /* out len */
+ SSL_BUFFER_SPACE(wrBuf), /* max out */
+ pIn, contentLen, /* input */
SSL_BUFFER_BASE(&pseudoHeader), SSL_BUFFER_LEN(&pseudoHeader));
if (rv != SECSuccess) {
PORT_SetError(SSL_ERROR_ENCRYPTION_FAILURE);
return SECFailure;
}
+
+ rv = sslBuffer_Skip(wrBuf, len, NULL);
+ PORT_Assert(rv == SECSuccess); /* Can't fail. */
} else {
int blockSize = cwSpec->cipherDef->block_size;
@@ -2069,7 +2078,7 @@ ssl3_MACEncryptRecord(ssl3CipherSpec *cwSpec,
rv = ssl3_ComputeRecordMAC(cwSpec, SSL_BUFFER_BASE(&pseudoHeader),
SSL_BUFFER_LEN(&pseudoHeader),
pIn, contentLen,
- wrBuf->buf + ivLen + contentLen, &macLen);
+ SSL_BUFFER_NEXT(wrBuf) + contentLen, &macLen);
if (rv != SECSuccess) {
ssl_MapLowLevelError(SSL_ERROR_MAC_COMPUTATION_FAILURE);
return SECFailure;
@@ -2095,7 +2104,7 @@ ssl3_MACEncryptRecord(ssl3CipherSpec *cwSpec,
PORT_Assert((fragLen % blockSize) == 0);
/* Pad according to TLS rules (also acceptable to SSL3). */
- pBuf = &wrBuf->buf[ivLen + fragLen - 1];
+ pBuf = SSL_BUFFER_NEXT(wrBuf) + fragLen - 1;
for (i = padding_length + 1; i > 0; --i) {
*pBuf-- = padding_length;
}
@@ -2112,14 +2121,14 @@ ssl3_MACEncryptRecord(ssl3CipherSpec *cwSpec,
p2Len += oddLen;
PORT_Assert((blockSize < 2) ||
(p2Len % blockSize) == 0);
- memmove(wrBuf->buf + ivLen + p1Len, pIn + p1Len, oddLen);
+ memmove(SSL_BUFFER_NEXT(wrBuf) + p1Len, pIn + p1Len, oddLen);
}
if (p1Len > 0) {
int cipherBytesPart1 = -1;
rv = cwSpec->cipher(cwSpec->cipherContext,
- wrBuf->buf + ivLen, /* output */
- &cipherBytesPart1, /* actual outlen */
- p1Len, /* max outlen */
+ SSL_BUFFER_NEXT(wrBuf), /* output */
+ &cipherBytesPart1, /* actual outlen */
+ p1Len, /* max outlen */
pIn,
p1Len); /* input, and inputlen */
PORT_Assert(rv == SECSuccess && cipherBytesPart1 == (int)p1Len);
@@ -2127,22 +2136,24 @@ ssl3_MACEncryptRecord(ssl3CipherSpec *cwSpec,
PORT_SetError(SSL_ERROR_ENCRYPTION_FAILURE);
return SECFailure;
}
- wrBuf->len += cipherBytesPart1;
+ rv = sslBuffer_Skip(wrBuf, p1Len, NULL);
+ PORT_Assert(rv == SECSuccess);
}
if (p2Len > 0) {
int cipherBytesPart2 = -1;
rv = cwSpec->cipher(cwSpec->cipherContext,
- wrBuf->buf + ivLen + p1Len,
+ SSL_BUFFER_NEXT(wrBuf),
&cipherBytesPart2, /* output and actual outLen */
p2Len, /* max outlen */
- wrBuf->buf + ivLen + p1Len,
+ SSL_BUFFER_NEXT(wrBuf),
p2Len); /* input and inputLen*/
PORT_Assert(rv == SECSuccess && cipherBytesPart2 == (int)p2Len);
if (rv != SECSuccess || cipherBytesPart2 != (int)p2Len) {
PORT_SetError(SSL_ERROR_ENCRYPTION_FAILURE);
return SECFailure;
}
- wrBuf->len += cipherBytesPart2;
+ rv = sslBuffer_Skip(wrBuf, p2Len, NULL);
+ PORT_Assert(rv == SECSuccess);
}
}
@@ -2150,16 +2161,20 @@ ssl3_MACEncryptRecord(ssl3CipherSpec *cwSpec,
}
/* Note: though this can report failure, it shouldn't. */
-static SECStatus
+SECStatus
ssl_InsertRecordHeader(const sslSocket *ss, ssl3CipherSpec *cwSpec,
- SSL3ContentType contentType, unsigned int len,
- sslBuffer *wrBuf)
+ SSL3ContentType contentType, sslBuffer *wrBuf,
+ PRBool *needsLength)
{
SECStatus rv;
#ifndef UNSAFE_FUZZER_MODE
if (cwSpec->version >= SSL_LIBRARY_VERSION_TLS_1_3 &&
- cwSpec->cipherDef->calg != ssl_calg_null) {
+ cwSpec->epoch > TrafficKeyClearText) {
+ if (IS_DTLS(ss)) {
+ return dtls13_InsertCipherTextHeader(ss, cwSpec, wrBuf,
+ needsLength);
+ }
contentType = content_application_data;
}
#endif
@@ -2177,16 +2192,12 @@ ssl_InsertRecordHeader(const sslSocket *ss, ssl3CipherSpec *cwSpec,
if (rv != SECSuccess) {
return SECFailure;
}
- rv = sslBuffer_AppendNumber(wrBuf, cwSpec->seqNum, 6);
+ rv = sslBuffer_AppendNumber(wrBuf, cwSpec->nextSeqNum, 6);
if (rv != SECSuccess) {
return SECFailure;
}
}
- rv = sslBuffer_AppendNumber(wrBuf, len, 2);
- if (rv != SECSuccess) {
- return SECFailure;
- }
-
+ *needsLength = PR_TRUE;
return SECSuccess;
}
@@ -2194,66 +2205,67 @@ SECStatus
ssl_ProtectRecord(sslSocket *ss, ssl3CipherSpec *cwSpec, SSL3ContentType type,
const PRUint8 *pIn, PRUint32 contentLen, sslBuffer *wrBuf)
{
- unsigned int headerLen = IS_DTLS(ss) ? DTLS_RECORD_HEADER_LENGTH
- : SSL3_RECORD_HEADER_LENGTH;
- sslBuffer protBuf = SSL_BUFFER_FIXED(SSL_BUFFER_BASE(wrBuf) + headerLen,
- SSL_BUFFER_SPACE(wrBuf) - headerLen);
- PRBool isTLS13;
+ PRBool needsLength;
+ unsigned int lenOffset;
SECStatus rv;
PORT_Assert(cwSpec->direction == CipherSpecWrite);
PORT_Assert(SSL_BUFFER_LEN(wrBuf) == 0);
PORT_Assert(cwSpec->cipherDef->max_records <= RECORD_SEQ_MAX);
- if (cwSpec->seqNum >= cwSpec->cipherDef->max_records) {
+
+ if (cwSpec->nextSeqNum >= cwSpec->cipherDef->max_records) {
/* We should have automatically updated before here in TLS 1.3. */
PORT_Assert(cwSpec->version < SSL_LIBRARY_VERSION_TLS_1_3);
SSL_TRC(3, ("%d: SSL[-]: write sequence number at limit 0x%0llx",
- SSL_GETPID(), cwSpec->seqNum));
+ SSL_GETPID(), cwSpec->nextSeqNum));
PORT_SetError(SSL_ERROR_TOO_MANY_RECORDS);
return SECFailure;
}
- isTLS13 = (PRBool)(cwSpec->version >= SSL_LIBRARY_VERSION_TLS_1_3);
+ rv = ssl_InsertRecordHeader(ss, cwSpec, type, wrBuf, &needsLength);
+ if (rv != SECSuccess) {
+ return SECFailure;
+ }
+ if (needsLength) {
+ rv = sslBuffer_Skip(wrBuf, 2, &lenOffset);
+ if (rv != SECSuccess) {
+ return SECFailure;
+ }
+ }
#ifdef UNSAFE_FUZZER_MODE
{
int len;
- rv = Null_Cipher(NULL, SSL_BUFFER_BASE(&protBuf), &len,
- SSL_BUFFER_SPACE(&protBuf), pIn, contentLen);
+ rv = Null_Cipher(NULL, SSL_BUFFER_NEXT(wrBuf), &len,
+ SSL_BUFFER_SPACE(wrBuf), pIn, contentLen);
if (rv != SECSuccess) {
return SECFailure; /* error was set */
}
- rv = sslBuffer_Skip(&protBuf, len, NULL);
+ rv = sslBuffer_Skip(wrBuf, len, NULL);
PORT_Assert(rv == SECSuccess); /* Can't fail. */
}
#else
- if (isTLS13) {
- rv = tls13_ProtectRecord(ss, cwSpec, type, pIn, contentLen, &protBuf);
+ if (cwSpec->version >= SSL_LIBRARY_VERSION_TLS_1_3) {
+ rv = tls13_ProtectRecord(ss, cwSpec, type, pIn, contentLen, wrBuf);
} else {
rv = ssl3_MACEncryptRecord(cwSpec, ss->sec.isServer, IS_DTLS(ss), type,
- pIn, contentLen, &protBuf);
+ pIn, contentLen, wrBuf);
}
#endif
if (rv != SECSuccess) {
return SECFailure; /* error was set */
}
- PORT_Assert(protBuf.len <= MAX_FRAGMENT_LENGTH + (isTLS13 ? 256 : 1024));
-
- rv = ssl_InsertRecordHeader(ss, cwSpec, type, SSL_BUFFER_LEN(&protBuf),
- wrBuf);
- if (rv != SECSuccess) {
- return SECFailure;
- }
-
- PORT_Assert(SSL_BUFFER_LEN(wrBuf) == headerLen);
- rv = sslBuffer_Skip(wrBuf, SSL_BUFFER_LEN(&protBuf), NULL);
- if (rv != SECSuccess) {
- PORT_Assert(0); /* Can't fail. */
- return SECFailure;
+ if (needsLength) {
+ /* Insert the length. */
+ rv = sslBuffer_InsertLength(wrBuf, lenOffset, 2);
+ if (rv != SECSuccess) {
+ PORT_Assert(0); /* Can't fail. */
+ return SECFailure;
+ }
}
- ++cwSpec->seqNum;
+ ++cwSpec->nextSeqNum;
return SECSuccess;
}
@@ -2267,7 +2279,7 @@ ssl_ProtectNextRecord(sslSocket *ss, ssl3CipherSpec *spec, SSL3ContentType type,
unsigned int spaceNeeded;
SECStatus rv;
- contentLen = PR_MIN(nIn, MAX_FRAGMENT_LENGTH);
+ contentLen = PR_MIN(nIn, spec->recordSizeLimit);
spaceNeeded = contentLen + SSL3_BUFFER_FUDGE;
if (spec->version >= SSL_LIBRARY_VERSION_TLS_1_1 &&
spec->cipherDef->type == type_block) {
@@ -2291,6 +2303,7 @@ ssl_ProtectNextRecord(sslSocket *ss, ssl3CipherSpec *spec, SSL3ContentType type,
*written = contentLen;
return SECSuccess;
}
+
/* Process the plain text before sending it.
* Returns the number of bytes of plaintext that were successfully sent
* plus the number of bytes of plaintext that were copied into the
@@ -2368,7 +2381,7 @@ ssl3_SendRecord(sslSocket *ss,
rv = ssl_ProtectNextRecord(ss, spec, type, pIn, nIn, &written);
ssl_ReleaseSpecReadLock(ss);
if (rv != SECSuccess) {
- return SECFailure;
+ goto loser;
}
PORT_Assert(written > 0);
@@ -3034,7 +3047,6 @@ ssl3_SendChangeCipherSpecsInt(sslSocket *ss)
return SECFailure; /* error code set by ssl3_SendRecord */
}
} else {
- SECStatus rv;
rv = dtls_QueueMessage(ss, content_change_cipher_spec, &change, 1);
if (rv != SECSuccess) {
return SECFailure;
@@ -5567,13 +5579,20 @@ ssl3_SendRSAClientKeyExchange(sslSocket *ss, SECKEYPublicKey *svrPubKey)
}
/* Get the wrapped (encrypted) pre-master secret, enc_pms */
- enc_pms.len = SECKEY_PublicKeyStrength(svrPubKey);
+ unsigned int svrPubKeyBits = SECKEY_PublicKeyStrengthInBits(svrPubKey);
+ enc_pms.len = (svrPubKeyBits + 7) / 8;
+ /* Check that the RSA key isn't larger than 8k bit. */
+ if (svrPubKeyBits > SSL_MAX_RSA_KEY_BITS) {
+ (void)SSL3_SendAlert(ss, alert_fatal, illegal_parameter);
+ ssl_MapLowLevelError(SSL_ERROR_CLIENT_KEY_EXCHANGE_FAILURE);
+ goto loser;
+ }
enc_pms.data = (unsigned char *)PORT_Alloc(enc_pms.len);
if (enc_pms.data == NULL) {
goto loser; /* err set by PORT_Alloc */
}
- /* wrap pre-master secret in server's public key. */
+ /* Wrap pre-master secret in server's public key. */
rv = PK11_PubWrapSymKey(CKM_RSA_PKCS, svrPubKey, pms, &enc_pms);
if (rv != SECSuccess) {
ssl_MapLowLevelError(SSL_ERROR_CLIENT_KEY_EXCHANGE_FAILURE);
@@ -5676,7 +5695,7 @@ ssl3_SendDHClientKeyExchange(sslSocket *ss, SECKEYPublicKey *svrPubKey)
};
sslEphemeralKeyPair *keyPair = NULL;
SECKEYPublicKey *pubKey;
- PRUint8 dhData[1026]; /* Enough for the 8192-bit group. */
+ PRUint8 dhData[SSL_MAX_DH_KEY_BITS / 8 + 2];
sslBuffer dhBuf = SSL_BUFFER(dhData);
PORT_Assert(ss->opt.noLocks || ssl_HaveSSL3HandshakeLock(ss));
@@ -6208,7 +6227,6 @@ ssl3_HandleServerHello(sslSocket *ss, PRUint8 *b, PRUint32 length)
SECItem sidBytes = { siBuffer, NULL, 0 };
PRBool isHelloRetry;
SSL3AlertDescription desc = illegal_parameter;
- TLSExtension *versionExtension;
const PRUint8 *savedMsg = b;
const PRUint32 savedLength = length;
#ifndef TLS_1_3_DRAFT_VERSION
@@ -6299,16 +6317,10 @@ ssl3_HandleServerHello(sslSocket *ss, PRUint8 *b, PRUint32 length)
}
}
- /* Update the version based on the extension, as necessary. */
- versionExtension = ssl3_FindExtension(ss, ssl_tls13_supported_versions_xtn);
- if (versionExtension) {
- rv = ssl_ClientReadVersion(ss, &versionExtension->data.data,
- &versionExtension->data.len,
- &ss->version);
- if (rv != SECSuccess) {
- errCode = PORT_GetError();
- goto loser; /* An alert is sent by ssl_ClientReadVersion */
- }
+ /* Read supported_versions if present. */
+ rv = tls13_ClientReadSupportedVersion(ss);
+ if (rv != SECSuccess) {
+ goto loser;
}
PORT_Assert(!SSL_ALL_VERSIONS_DISABLED(&ss->vrange));
@@ -6332,7 +6344,7 @@ ssl3_HandleServerHello(sslSocket *ss, PRUint8 *b, PRUint32 length)
/* The server didn't pick 1.3 although we either received a
* HelloRetryRequest, or we prepared to send early app data. */
if (ss->version < SSL_LIBRARY_VERSION_TLS_1_3) {
- if (ss->ssl3.hs.helloRetry) {
+ if (isHelloRetry || ss->ssl3.hs.helloRetry) {
/* SSL3_SendAlert() will uncache the SID. */
desc = illegal_parameter;
errCode = SSL_ERROR_RX_MALFORMED_SERVER_HELLO;
@@ -6393,8 +6405,9 @@ ssl3_HandleServerHello(sslSocket *ss, PRUint8 *b, PRUint32 length)
/* Finally, now all the version-related checks have passed. */
ss->ssl3.hs.preliminaryInfo |= ssl_preinfo_version;
/* Update the write cipher spec to match the version. But not after
- * HelloRetryRequest, because cwSpec might be a 0-RTT cipher spec. */
- if (!ss->firstHsDone && !ss->ssl3.hs.helloRetry) {
+ * HelloRetryRequest, because cwSpec might be a 0-RTT cipher spec,
+ * in which case this is a no-op. */
+ if (!ss->firstHsDone && !isHelloRetry) {
ssl_GetSpecWriteLock(ss);
ssl_SetSpecVersions(ss, ss->ssl3.cwSpec);
ssl_ReleaseSpecWriteLock(ss);
@@ -6729,6 +6742,10 @@ ssl_HandleDHServerKeyExchange(sslSocket *ss, PRUint8 *b, PRUint32 length)
errCode = SSL_ERROR_WEAK_SERVER_EPHEMERAL_DH_KEY;
goto alert_loser;
}
+ if (dh_p_bits > SSL_MAX_DH_KEY_BITS) {
+ errCode = SSL_ERROR_DH_KEY_TOO_LONG;
+ goto alert_loser;
+ }
rv = ssl3_ConsumeHandshakeVariable(ss, &dh_g, 2, &b, &length);
if (rv != SECSuccess) {
goto loser; /* malformed. */
@@ -6938,8 +6955,10 @@ ssl3_ParseCertificateRequestCAs(sslSocket *ss, PRUint8 **b, PRUint32 *length,
goto alert_loser; /* malformed */
remaining -= 2;
+ if (SECITEM_MakeItem(ca_list->arena, &node->name, *b, len) != SECSuccess) {
+ goto no_mem;
+ }
node->name.len = len;
- node->name.data = *b;
*b += len;
*length -= len;
remaining -= len;
@@ -6967,7 +6986,6 @@ ssl3_ParseCertificateRequestCAs(sslSocket *ss, PRUint8 **b, PRUint32 *length,
return SECSuccess;
no_mem:
- PORT_SetError(SEC_ERROR_NO_MEMORY);
return SECFailure;
alert_loser:
@@ -7332,10 +7350,6 @@ ssl3_SendClientSecondRound(sslSocket *ss)
* certificate to an attacker that does not have a valid cert for the
* domain we are connecting to.
*
- * XXX: We should do the same for the NPN extension, but for that we
- * need an option to give the application the ability to leak the NPN
- * information to get better performance.
- *
* During the initial handshake on a connection, we never send/receive
* application data until we have authenticated the server's certificate;
* i.e. we have fully authenticated the handshake before using the cipher
@@ -7409,14 +7423,6 @@ ssl3_SendClientSecondRound(sslSocket *ss)
ss->enoughFirstHsDone = PR_TRUE;
if (!ss->firstHsDone) {
- /* XXX: If the server's certificate hasn't been authenticated by this
- * point, then we may be leaking this NPN message to an attacker.
- */
- rv = ssl3_SendNextProto(ss);
- if (rv != SECSuccess) {
- goto loser; /* err code was set. */
- }
-
if (ss->opt.enableFalseStart) {
if (!ss->ssl3.hs.authCertificatePending) {
/* When we fix bug 589047, we will need to know whether we are
@@ -8879,12 +8885,10 @@ ssl_ConstructServerHello(sslSocket *ss, PRBool helloRetry,
SSL3ProtocolVersion version;
sslSessionID *sid = ss->sec.ci.sid;
- if (IS_DTLS(ss) && ss->version < SSL_LIBRARY_VERSION_TLS_1_3) {
- version = dtls_TLSVersionToDTLSVersion(ss->version);
- } else {
- version = PR_MIN(ss->version, SSL_LIBRARY_VERSION_TLS_1_2);
+ version = PR_MIN(ss->version, SSL_LIBRARY_VERSION_TLS_1_2);
+ if (IS_DTLS(ss)) {
+ version = dtls_TLSVersionToDTLSVersion(version);
}
-
rv = sslBuffer_AppendNumber(messageBuf, version, 2);
if (rv != SECSuccess) {
return SECFailure;
@@ -11404,6 +11408,10 @@ ssl3_HandleHandshakeMessage(sslSocket *ss, PRUint8 *b, PRUint32 length,
/* Increment the expected sequence number */
ss->ssl3.hs.recvMessageSeq++;
}
+
+ /* Taint the message so that it's easier to detect UAFs. */
+ PORT_Memset(b, 'N', length);
+
return rv;
}
@@ -11738,7 +11746,7 @@ ssl_RemoveTLSCBCPadding(sslBuffer *plaintext, unsigned int macSize)
}
for (i = 0; i < toCheck; i++) {
- unsigned int t = paddingLength - i;
+ t = paddingLength - i;
/* If i <= paddingLength then the MSB of t is zero and mask is
* 0xff. Otherwise, mask is 0. */
unsigned char mask = DUPLICATE_MSB_TO_ALL(~t);
@@ -11878,6 +11886,7 @@ ssl3_UnprotectRecord(sslSocket *ss,
unsigned int good;
unsigned int ivLen = 0;
SSL3ContentType rType;
+ SSL3ProtocolVersion rVersion;
unsigned int minLength;
unsigned int originalLen = 0;
PRUint8 headerBuf[13];
@@ -11950,7 +11959,9 @@ ssl3_UnprotectRecord(sslSocket *ss,
return SECFailure;
}
- rType = cText->type;
+ rType = (SSL3ContentType)cText->hdr[0];
+ rVersion = ((SSL3ProtocolVersion)cText->hdr[1] << 8) |
+ (SSL3ProtocolVersion)cText->hdr[2];
if (cipher_def->type == type_aead) {
/* XXX For many AEAD ciphers, the plaintext is shorter than the
* ciphertext by a fixed byte count, but it is not true in general.
@@ -11960,8 +11971,8 @@ ssl3_UnprotectRecord(sslSocket *ss,
cText->buf->len - cipher_def->explicit_nonce_size -
cipher_def->tag_size;
rv = ssl3_BuildRecordPseudoHeader(
- spec->epoch, IS_DTLS(ss) ? cText->seq_num : spec->seqNum,
- rType, isTLS, cText->version, IS_DTLS(ss), decryptedLen, &header);
+ spec->epoch, cText->seqNum,
+ rType, isTLS, rVersion, IS_DTLS(ss), decryptedLen, &header);
PORT_Assert(rv == SECSuccess);
rv = spec->aead(&spec->keyMaterial,
PR_TRUE, /* do decrypt */
@@ -12008,8 +12019,8 @@ ssl3_UnprotectRecord(sslSocket *ss,
/* compute the MAC */
rv = ssl3_BuildRecordPseudoHeader(
- spec->epoch, IS_DTLS(ss) ? cText->seq_num : spec->seqNum,
- rType, isTLS, cText->version, IS_DTLS(ss),
+ spec->epoch, cText->seqNum,
+ rType, isTLS, rVersion, IS_DTLS(ss),
plaintext->len - spec->macDef->mac_size, &header);
PORT_Assert(rv == SECSuccess);
if (cipher_def->type == type_block) {
@@ -12059,13 +12070,19 @@ ssl3_UnprotectRecord(sslSocket *ss,
return SECSuccess;
}
-static SECStatus
+SECStatus
ssl3_HandleNonApplicationData(sslSocket *ss, SSL3ContentType rType,
DTLSEpoch epoch, sslSequenceNumber seqNum,
sslBuffer *databuf)
{
SECStatus rv;
+ /* check for Token Presence */
+ if (!ssl3_ClientAuthTokenPresent(ss->sec.ci.sid)) {
+ PORT_SetError(SSL_ERROR_TOKEN_INSERTION_REMOVAL);
+ return SECFailure;
+ }
+
ssl_GetSSL3HandshakeLock(ss);
/* All the functions called in this switch MUST set error code if
@@ -12111,15 +12128,16 @@ ssl3_HandleNonApplicationData(sslSocket *ss, SSL3ContentType rType,
* Returns NULL if no appropriate cipher spec is found.
*/
static ssl3CipherSpec *
-ssl3_GetCipherSpec(sslSocket *ss, sslSequenceNumber seq)
+ssl3_GetCipherSpec(sslSocket *ss, SSL3Ciphertext *cText)
{
ssl3CipherSpec *crSpec = ss->ssl3.crSpec;
ssl3CipherSpec *newSpec = NULL;
- DTLSEpoch epoch = seq >> 48;
+ DTLSEpoch epoch;
if (!IS_DTLS(ss)) {
return crSpec;
}
+ epoch = dtls_ReadEpoch(crSpec, cText->hdr);
if (crSpec->epoch == epoch) {
return crSpec;
}
@@ -12136,6 +12154,11 @@ ssl3_GetCipherSpec(sslSocket *ss, sslSequenceNumber seq)
return NULL;
}
+/* MAX_EXPANSION is the amount by which a record might plausibly be expanded
+ * when protected. It's the worst case estimate, so the sum of block cipher
+ * padding (up to 256 octets) and HMAC (48 octets for SHA-384). */
+#define MAX_EXPANSION (256 + 48)
+
/* if cText is non-null, then decipher and check the MAC of the
* SSL record from cText->buf (typically gs->inbuf)
* into databuf (typically gs->buf), and any previous contents of databuf
@@ -12159,16 +12182,16 @@ ssl3_GetCipherSpec(sslSocket *ss, sslSequenceNumber seq)
* Application Data records.
*/
SECStatus
-ssl3_HandleRecord(sslSocket *ss, SSL3Ciphertext *cText, sslBuffer *databuf)
+ssl3_HandleRecord(sslSocket *ss, SSL3Ciphertext *cText)
{
SECStatus rv;
PRBool isTLS;
DTLSEpoch epoch;
- sslSequenceNumber seqNum = 0;
ssl3CipherSpec *spec = NULL;
+ PRUint16 recordSizeLimit;
PRBool outOfOrderSpec = PR_FALSE;
SSL3ContentType rType;
- sslBuffer *plaintext;
+ sslBuffer *plaintext = &ss->gs.buf;
SSL3AlertDescription alert = internal_error;
PORT_Assert(ss->opt.noLocks || ssl_HaveRecvBufLock(ss));
@@ -12178,27 +12201,23 @@ ssl3_HandleRecord(sslSocket *ss, SSL3Ciphertext *cText, sslBuffer *databuf)
return SECFailure;
}
- /* cText is NULL when we're called from ssl3_RestartHandshakeAfterXXX().
- * This implies that databuf holds a previously deciphered SSL Handshake
- * message.
- */
- if (cText == NULL) {
- SSL_DBG(("%d: SSL3[%d]: HandleRecord, resuming handshake",
- SSL_GETPID(), ss->fd));
- /* Note that this doesn't pass the epoch and sequence number of the
- * record through, which DTLS 1.3 depends on. DTLS doesn't support
- * asynchronous certificate validation, so that should be OK. */
- PORT_Assert(!IS_DTLS(ss));
- return ssl3_HandleNonApplicationData(ss, content_handshake,
- 0, 0, databuf);
+ /* Clear out the buffer in case this exits early. Any data then won't be
+ * processed twice. */
+ plaintext->len = 0;
+
+ /* We're waiting for another ClientHello, which will appear unencrypted.
+ * Use the content type to tell whether this should be discarded. */
+ if (ss->ssl3.hs.zeroRttIgnore == ssl_0rtt_ignore_hrr &&
+ cText->hdr[0] == content_application_data) {
+ PORT_Assert(ss->ssl3.hs.ws == wait_client_hello);
+ return SECSuccess;
}
ssl_GetSpecReadLock(ss); /******************************************/
- spec = ssl3_GetCipherSpec(ss, cText->seq_num);
+ spec = ssl3_GetCipherSpec(ss, cText);
if (!spec) {
PORT_Assert(IS_DTLS(ss));
ssl_ReleaseSpecReadLock(ss); /*****************************/
- databuf->len = 0; /* Needed to ensure data not left around */
return SECSuccess;
}
if (spec != ss->ssl3.crSpec) {
@@ -12209,66 +12228,68 @@ ssl3_HandleRecord(sslSocket *ss, SSL3Ciphertext *cText, sslBuffer *databuf)
}
isTLS = (PRBool)(spec->version > SSL_LIBRARY_VERSION_3_0);
if (IS_DTLS(ss)) {
- if (!dtls_IsRelevant(ss, spec, cText, &seqNum)) {
+ if (!dtls_IsRelevant(ss, spec, cText, &cText->seqNum)) {
ssl_ReleaseSpecReadLock(ss); /*****************************/
- databuf->len = 0; /* Needed to ensure data not left around */
-
return SECSuccess;
}
} else {
- seqNum = spec->seqNum + 1;
+ cText->seqNum = spec->nextSeqNum;
}
- if (seqNum >= spec->cipherDef->max_records) {
+ if (cText->seqNum >= spec->cipherDef->max_records) {
ssl_ReleaseSpecReadLock(ss); /*****************************/
SSL_TRC(3, ("%d: SSL[%d]: read sequence number at limit 0x%0llx",
- SSL_GETPID(), ss->fd, seqNum));
+ SSL_GETPID(), ss->fd, cText->seqNum));
PORT_SetError(SSL_ERROR_TOO_MANY_RECORDS);
return SECFailure;
}
- plaintext = databuf;
- plaintext->len = 0; /* filled in by Unprotect call below. */
-
- /* We're waiting for another ClientHello, which will appear unencrypted.
- * Use the content type to tell whether this is should be discarded.
- *
- * XXX If we decide to remove the content type from encrypted records, this
- * will become much more difficult to manage. */
- if (ss->ssl3.hs.zeroRttIgnore == ssl_0rtt_ignore_hrr &&
- cText->type == content_application_data) {
+ recordSizeLimit = spec->recordSizeLimit;
+ if (cText->buf->len > recordSizeLimit + MAX_EXPANSION) {
ssl_ReleaseSpecReadLock(ss); /*****************************/
- PORT_Assert(ss->ssl3.hs.ws == wait_client_hello);
- databuf->len = 0;
- return SECSuccess;
+ SSL3_SendAlert(ss, alert_fatal, record_overflow);
+ PORT_SetError(SSL_ERROR_RX_RECORD_TOO_LONG);
+ return SECFailure;
}
- if (plaintext->space < MAX_FRAGMENT_LENGTH) {
- rv = sslBuffer_Grow(plaintext, MAX_FRAGMENT_LENGTH + 2048);
+ if (plaintext->space < recordSizeLimit + MAX_EXPANSION) {
+ rv = sslBuffer_Grow(plaintext, recordSizeLimit + MAX_EXPANSION);
if (rv != SECSuccess) {
ssl_ReleaseSpecReadLock(ss); /*************************/
SSL_DBG(("%d: SSL3[%d]: HandleRecord, tried to get %d bytes",
- SSL_GETPID(), ss->fd, MAX_FRAGMENT_LENGTH + 2048));
+ SSL_GETPID(), ss->fd, recordSizeLimit + MAX_EXPANSION));
/* sslBuffer_Grow has set a memory error code. */
/* Perhaps we should send an alert. (but we have no memory!) */
return SECFailure;
}
}
+ /* Most record types aside from protected TLS 1.3 records carry the content
+ * type in the first octet. TLS 1.3 will override this value later. */
+ rType = cText->hdr[0];
+ /* Encrypted application data records could arrive before the handshake
+ * completes in DTLS 1.3. These can look like valid TLS 1.2 application_data
+ * records in epoch 0, which is never valid. Pretend they didn't decrypt. */
+ if (spec->epoch == 0 && rType == content_application_data) {
+ PORT_SetError(SSL_ERROR_RX_UNEXPECTED_APPLICATION_DATA);
+ alert = unexpected_message;
+ rv = SECFailure;
+ } else {
#ifdef UNSAFE_FUZZER_MODE
- rv = Null_Cipher(NULL, plaintext->buf, (int *)&plaintext->len,
- plaintext->space, cText->buf->buf, cText->buf->len);
+ rv = Null_Cipher(NULL, plaintext->buf, (int *)&plaintext->len,
+ plaintext->space, cText->buf->buf, cText->buf->len);
#else
- /* IMPORTANT: Unprotect functions MUST NOT send alerts
- * because we still hold the spec read lock. Instead, if they
- * return SECFailure, they set *alert to the alert to be sent. */
- if (spec->version < SSL_LIBRARY_VERSION_TLS_1_3 ||
- spec->cipherDef->calg == ssl_calg_null) {
- /* Unencrypted TLS 1.3 records use the pre-TLS 1.3 format. */
- rv = ssl3_UnprotectRecord(ss, spec, cText, plaintext, &alert);
- } else {
- rv = tls13_UnprotectRecord(ss, spec, cText, plaintext, &alert);
- }
+ /* IMPORTANT: Unprotect functions MUST NOT send alerts
+ * because we still hold the spec read lock. Instead, if they
+ * return SECFailure, they set *alert to the alert to be sent. */
+ if (spec->version < SSL_LIBRARY_VERSION_TLS_1_3 ||
+ spec->epoch == 0) {
+ rv = ssl3_UnprotectRecord(ss, spec, cText, plaintext, &alert);
+ } else {
+ rv = tls13_UnprotectRecord(ss, spec, cText, plaintext, &rType,
+ &alert);
+ }
#endif
+ }
if (rv != SECSuccess) {
ssl_ReleaseSpecReadLock(ss); /***************************/
@@ -12276,39 +12297,45 @@ ssl3_HandleRecord(sslSocket *ss, SSL3Ciphertext *cText, sslBuffer *databuf)
SSL_DBG(("%d: SSL3[%d]: decryption failed", SSL_GETPID(), ss->fd));
/* Ensure that we don't process this data again. */
- databuf->len = 0;
+ plaintext->len = 0;
- /* Ignore a CCS if the alternative handshake is negotiated. Note that
- * this will fail if the server fails to negotiate the alternative
- * handshake type in a 0-RTT session that is resumed from a session that
- * did negotiate it. We don't care about that corner case right now. */
+ /* Ignore a CCS if compatibility mode is negotiated. Note that this
+ * will fail if the server fails to negotiate compatibility mode in a
+ * 0-RTT session that is resumed from a session that did negotiate it.
+ * We don't care about that corner case right now. */
if (ss->version >= SSL_LIBRARY_VERSION_TLS_1_3 &&
- cText->type == content_change_cipher_spec &&
+ cText->hdr[0] == content_change_cipher_spec &&
ss->ssl3.hs.ws != idle_handshake &&
cText->buf->len == 1 &&
cText->buf->buf[0] == change_cipher_spec_choice) {
/* Ignore the CCS. */
return SECSuccess;
}
+
if (IS_DTLS(ss) ||
(ss->sec.isServer &&
ss->ssl3.hs.zeroRttIgnore == ssl_0rtt_ignore_trial)) {
- /* Silently drop the packet */
+ /* Silently drop the packet unless we sent a fatal alert. */
+ if (ss->ssl3.fatalAlertSent) {
+ return SECFailure;
+ }
return SECSuccess;
- } else {
- int errCode = PORT_GetError();
- SSL3_SendAlert(ss, alert_fatal, alert);
- /* Reset the error code in case SSL3_SendAlert called
- * PORT_SetError(). */
- PORT_SetError(errCode);
- return SECFailure;
}
+
+ int errCode = PORT_GetError();
+ SSL3_SendAlert(ss, alert_fatal, alert);
+ /* Reset the error code in case SSL3_SendAlert called
+ * PORT_SetError(). */
+ PORT_SetError(errCode);
+ return SECFailure;
}
/* SECSuccess */
- spec->seqNum = PR_MAX(spec->seqNum, seqNum);
if (IS_DTLS(ss)) {
- dtls_RecordSetRecvd(&spec->recvdRecords, seqNum);
+ dtls_RecordSetRecvd(&spec->recvdRecords, cText->seqNum);
+ spec->nextSeqNum = PR_MAX(spec->nextSeqNum, cText->seqNum + 1);
+ } else {
+ ++spec->nextSeqNum;
}
epoch = spec->epoch;
@@ -12317,19 +12344,18 @@ ssl3_HandleRecord(sslSocket *ss, SSL3Ciphertext *cText, sslBuffer *databuf)
/*
* The decrypted data is now in plaintext.
*/
- rType = cText->type; /* This must go after decryption because TLS 1.3
- * has encrypted content types. */
/* IMPORTANT: We are in DTLS 1.3 mode and we have processed something
* from the wrong epoch. Divert to a divert processing function to make
* sure we don't accidentally use the data unsafely. */
if (outOfOrderSpec) {
PORT_Assert(IS_DTLS(ss) && ss->version >= SSL_LIBRARY_VERSION_TLS_1_3);
- return dtls13_HandleOutOfEpochRecord(ss, spec, rType, databuf);
+ return dtls13_HandleOutOfEpochRecord(ss, spec, rType, plaintext);
}
/* Check the length of the plaintext. */
- if (isTLS && databuf->len > MAX_FRAGMENT_LENGTH) {
+ if (isTLS && plaintext->len > recordSizeLimit) {
+ plaintext->len = 0;
SSL3_SendAlert(ss, alert_fatal, record_overflow);
PORT_SetError(SSL_ERROR_RX_RECORD_TOO_LONG);
return SECFailure;
@@ -12344,14 +12370,16 @@ ssl3_HandleRecord(sslSocket *ss, SSL3Ciphertext *cText, sslBuffer *databuf)
if (ss->version >= SSL_LIBRARY_VERSION_TLS_1_3 &&
ss->sec.isServer &&
ss->ssl3.hs.zeroRttState == ssl_0rtt_accepted) {
- return tls13_HandleEarlyApplicationData(ss, databuf);
+ return tls13_HandleEarlyApplicationData(ss, plaintext);
}
+ plaintext->len = 0;
(void)SSL3_SendAlert(ss, alert_fatal, unexpected_message);
PORT_SetError(SSL_ERROR_RX_UNEXPECTED_APPLICATION_DATA);
return SECFailure;
}
- return ssl3_HandleNonApplicationData(ss, rType, epoch, seqNum, databuf);
+ return ssl3_HandleNonApplicationData(ss, rType, epoch, cText->seqNum,
+ plaintext);
}
/*
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-24 13:14:42 +0000