diff options
Diffstat (limited to 'media/omx-plugin/include/ics/system/window.h')
| -rw-r--r-- | media/omx-plugin/include/ics/system/window.h | 632 |
1 files changed, 632 insertions, 0 deletions
diff --git a/media/omx-plugin/include/ics/system/window.h b/media/omx-plugin/include/ics/system/window.h new file mode 100644 index 000000000..1cc4a0a18 --- /dev/null +++ b/media/omx-plugin/include/ics/system/window.h @@ -0,0 +1,632 @@ +/* + * Copyright (C) 2011 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H +#define SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H + +#include <stdint.h> +#include <sys/cdefs.h> +#include <system/graphics.h> +#include <cutils/native_handle.h> + +__BEGIN_DECLS + +/*****************************************************************************/ + +#define ANDROID_NATIVE_MAKE_CONSTANT(a,b,c,d) \ + (((unsigned)(a)<<24)|((unsigned)(b)<<16)|((unsigned)(c)<<8)|(unsigned)(d)) + +#define ANDROID_NATIVE_WINDOW_MAGIC \ + ANDROID_NATIVE_MAKE_CONSTANT('_','w','n','d') + +#define ANDROID_NATIVE_BUFFER_MAGIC \ + ANDROID_NATIVE_MAKE_CONSTANT('_','b','f','r') + +// --------------------------------------------------------------------------- + +typedef const native_handle_t* buffer_handle_t; + +// --------------------------------------------------------------------------- + +typedef struct android_native_rect_t +{ + int32_t left; + int32_t top; + int32_t right; + int32_t bottom; +} android_native_rect_t; + +// --------------------------------------------------------------------------- + +typedef struct android_native_base_t +{ + /* a magic value defined by the actual EGL native type */ + int magic; + + /* the sizeof() of the actual EGL native type */ + int version; + + void* reserved[4]; + + /* reference-counting interface */ + void (*incRef)(struct android_native_base_t* base); + void (*decRef)(struct android_native_base_t* base); +} android_native_base_t; + +typedef struct ANativeWindowBuffer +{ +#ifdef __cplusplus + ANativeWindowBuffer() { + common.magic = ANDROID_NATIVE_BUFFER_MAGIC; + common.version = sizeof(ANativeWindowBuffer); + memset(common.reserved, 0, sizeof(common.reserved)); + } + + // Implement the methods that sp<ANativeWindowBuffer> expects so that it + // can be used to automatically refcount ANativeWindowBuffer's. + void incStrong(const void* id) const { + common.incRef(const_cast<android_native_base_t*>(&common)); + } + void decStrong(const void* id) const { + common.decRef(const_cast<android_native_base_t*>(&common)); + } +#endif + + struct android_native_base_t common; + + int width; + int height; + int stride; + int format; + int usage; + + void* reserved[2]; + + buffer_handle_t handle; + + void* reserved_proc[8]; +} ANativeWindowBuffer_t; + +// Old typedef for backwards compatibility. +typedef ANativeWindowBuffer_t android_native_buffer_t; + +// --------------------------------------------------------------------------- + +/* attributes queriable with query() */ +enum { + NATIVE_WINDOW_WIDTH = 0, + NATIVE_WINDOW_HEIGHT = 1, + NATIVE_WINDOW_FORMAT = 2, + + /* The minimum number of buffers that must remain un-dequeued after a buffer + * has been queued. This value applies only if set_buffer_count was used to + * override the number of buffers and if a buffer has since been queued. + * Users of the set_buffer_count ANativeWindow method should query this + * value before calling set_buffer_count. If it is necessary to have N + * buffers simultaneously dequeued as part of the steady-state operation, + * and this query returns M then N+M buffers should be requested via + * native_window_set_buffer_count. + * + * Note that this value does NOT apply until a single buffer has been + * queued. In particular this means that it is possible to: + * + * 1. Query M = min undequeued buffers + * 2. Set the buffer count to N + M + * 3. Dequeue all N + M buffers + * 4. Cancel M buffers + * 5. Queue, dequeue, queue, dequeue, ad infinitum + */ + NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS = 3, + + /* Check whether queueBuffer operations on the ANativeWindow send the buffer + * to the window compositor. The query sets the returned 'value' argument + * to 1 if the ANativeWindow DOES send queued buffers directly to the window + * compositor and 0 if the buffers do not go directly to the window + * compositor. + * + * This can be used to determine whether protected buffer content should be + * sent to the ANativeWindow. Note, however, that a result of 1 does NOT + * indicate that queued buffers will be protected from applications or users + * capturing their contents. If that behavior is desired then some other + * mechanism (e.g. the GRALLOC_USAGE_PROTECTED flag) should be used in + * conjunction with this query. + */ + NATIVE_WINDOW_QUEUES_TO_WINDOW_COMPOSER = 4, + + /* Get the concrete type of a ANativeWindow. See below for the list of + * possible return values. + * + * This query should not be used outside the Android framework and will + * likely be removed in the near future. + */ + NATIVE_WINDOW_CONCRETE_TYPE = 5, + + + /* + * Default width and height of the ANativeWindow, these are the dimensions + * of the window irrespective of the NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS + * call. + */ + NATIVE_WINDOW_DEFAULT_WIDTH = 6, + NATIVE_WINDOW_DEFAULT_HEIGHT = 7, + + /* + * transformation that will most-likely be applied to buffers. This is only + * a hint, the actual transformation applied might be different. + * + * INTENDED USE: + * + * The transform hint can be used by a producer, for instance the GLES + * driver, to pre-rotate the rendering such that the final transformation + * in the composer is identity. This can be very useful when used in + * conjunction with the h/w composer HAL, in situations where it + * cannot handle arbitrary rotations. + * + * 1. Before dequeuing a buffer, the GL driver (or any other ANW client) + * queries the ANW for NATIVE_WINDOW_TRANSFORM_HINT. + * + * 2. The GL driver overrides the width and height of the ANW to + * account for NATIVE_WINDOW_TRANSFORM_HINT. This is done by querying + * NATIVE_WINDOW_DEFAULT_{WIDTH | HEIGHT}, swapping the dimensions + * according to NATIVE_WINDOW_TRANSFORM_HINT and calling + * native_window_set_buffers_dimensions(). + * + * 3. The GL driver dequeues a buffer of the new pre-rotated size. + * + * 4. The GL driver renders to the buffer such that the image is + * already transformed, that is applying NATIVE_WINDOW_TRANSFORM_HINT + * to the rendering. + * + * 5. The GL driver calls native_window_set_transform to apply + * inverse transformation to the buffer it just rendered. + * In order to do this, the GL driver needs + * to calculate the inverse of NATIVE_WINDOW_TRANSFORM_HINT, this is + * done easily: + * + * int hintTransform, inverseTransform; + * query(..., NATIVE_WINDOW_TRANSFORM_HINT, &hintTransform); + * inverseTransform = hintTransform; + * if (hintTransform & HAL_TRANSFORM_ROT_90) + * inverseTransform ^= HAL_TRANSFORM_ROT_180; + * + * + * 6. The GL driver queues the pre-transformed buffer. + * + * 7. The composer combines the buffer transform with the display + * transform. If the buffer transform happens to cancel out the + * display transform then no rotation is needed. + * + */ + NATIVE_WINDOW_TRANSFORM_HINT = 8, +}; + +/* valid operations for the (*perform)() hook */ +enum { + NATIVE_WINDOW_SET_USAGE = 0, + NATIVE_WINDOW_CONNECT = 1, /* deprecated */ + NATIVE_WINDOW_DISCONNECT = 2, /* deprecated */ + NATIVE_WINDOW_SET_CROP = 3, + NATIVE_WINDOW_SET_BUFFER_COUNT = 4, + NATIVE_WINDOW_SET_BUFFERS_GEOMETRY = 5, /* deprecated */ + NATIVE_WINDOW_SET_BUFFERS_TRANSFORM = 6, + NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP = 7, + NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS = 8, + NATIVE_WINDOW_SET_BUFFERS_FORMAT = 9, + NATIVE_WINDOW_SET_SCALING_MODE = 10, + NATIVE_WINDOW_LOCK = 11, /* private */ + NATIVE_WINDOW_UNLOCK_AND_POST = 12, /* private */ + NATIVE_WINDOW_API_CONNECT = 13, /* private */ + NATIVE_WINDOW_API_DISCONNECT = 14, /* private */ +}; + +/* parameter for NATIVE_WINDOW_[API_][DIS]CONNECT */ +enum { + /* Buffers will be queued by EGL via eglSwapBuffers after being filled using + * OpenGL ES. + */ + NATIVE_WINDOW_API_EGL = 1, + + /* Buffers will be queued after being filled using the CPU + */ + NATIVE_WINDOW_API_CPU = 2, + + /* Buffers will be queued by Stagefright after being filled by a video + * decoder. The video decoder can either be a software or hardware decoder. + */ + NATIVE_WINDOW_API_MEDIA = 3, + + /* Buffers will be queued by the the camera HAL. + */ + NATIVE_WINDOW_API_CAMERA = 4, +}; + +/* parameter for NATIVE_WINDOW_SET_BUFFERS_TRANSFORM */ +enum { + /* flip source image horizontally */ + NATIVE_WINDOW_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H , + /* flip source image vertically */ + NATIVE_WINDOW_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V, + /* rotate source image 90 degrees clock-wise */ + NATIVE_WINDOW_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90, + /* rotate source image 180 degrees */ + NATIVE_WINDOW_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180, + /* rotate source image 270 degrees clock-wise */ + NATIVE_WINDOW_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270, +}; + +/* parameter for NATIVE_WINDOW_SET_SCALING_MODE */ +enum { + /* the window content is not updated (frozen) until a buffer of + * the window size is received (enqueued) + */ + NATIVE_WINDOW_SCALING_MODE_FREEZE = 0, + /* the buffer is scaled in both dimensions to match the window size */ + NATIVE_WINDOW_SCALING_MODE_SCALE_TO_WINDOW = 1, +}; + +/* values returned by the NATIVE_WINDOW_CONCRETE_TYPE query */ +enum { + NATIVE_WINDOW_FRAMEBUFFER = 0, /* FramebufferNativeWindow */ + NATIVE_WINDOW_SURFACE = 1, /* Surface */ + NATIVE_WINDOW_SURFACE_TEXTURE_CLIENT = 2, /* SurfaceTextureClient */ +}; + +/* parameter for NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP + * + * Special timestamp value to indicate that timestamps should be auto-generated + * by the native window when queueBuffer is called. This is equal to INT64_MIN, + * defined directly to avoid problems with C99/C++ inclusion of stdint.h. + */ +static const int64_t NATIVE_WINDOW_TIMESTAMP_AUTO = (-9223372036854775807LL-1); + +struct ANativeWindow +{ +#ifdef __cplusplus + ANativeWindow() + : flags(0), minSwapInterval(0), maxSwapInterval(0), xdpi(0), ydpi(0) + { + common.magic = ANDROID_NATIVE_WINDOW_MAGIC; + common.version = sizeof(ANativeWindow); + memset(common.reserved, 0, sizeof(common.reserved)); + } + + /* Implement the methods that sp<ANativeWindow> expects so that it + can be used to automatically refcount ANativeWindow's. */ + void incStrong(const void* id) const { + common.incRef(const_cast<android_native_base_t*>(&common)); + } + void decStrong(const void* id) const { + common.decRef(const_cast<android_native_base_t*>(&common)); + } +#endif + + struct android_native_base_t common; + + /* flags describing some attributes of this surface or its updater */ + const uint32_t flags; + + /* min swap interval supported by this updated */ + const int minSwapInterval; + + /* max swap interval supported by this updated */ + const int maxSwapInterval; + + /* horizontal and vertical resolution in DPI */ + const float xdpi; + const float ydpi; + + /* Some storage reserved for the OEM's driver. */ + intptr_t oem[4]; + + /* + * Set the swap interval for this surface. + * + * Returns 0 on success or -errno on error. + */ + int (*setSwapInterval)(struct ANativeWindow* window, + int interval); + + /* + * Hook called by EGL to acquire a buffer. After this call, the buffer + * is not locked, so its content cannot be modified. This call may block if + * no buffers are available. + * + * The window holds a reference to the buffer between dequeueBuffer and + * either queueBuffer or cancelBuffer, so clients only need their own + * reference if they might use the buffer after queueing or canceling it. + * Holding a reference to a buffer after queueing or canceling it is only + * allowed if a specific buffer count has been set. + * + * Returns 0 on success or -errno on error. + */ + int (*dequeueBuffer)(struct ANativeWindow* window, + struct ANativeWindowBuffer** buffer); + + /* + * hook called by EGL to lock a buffer. This MUST be called before modifying + * the content of a buffer. The buffer must have been acquired with + * dequeueBuffer first. + * + * Returns 0 on success or -errno on error. + */ + int (*lockBuffer)(struct ANativeWindow* window, + struct ANativeWindowBuffer* buffer); + /* + * Hook called by EGL when modifications to the render buffer are done. + * This unlocks and post the buffer. + * + * The window holds a reference to the buffer between dequeueBuffer and + * either queueBuffer or cancelBuffer, so clients only need their own + * reference if they might use the buffer after queueing or canceling it. + * Holding a reference to a buffer after queueing or canceling it is only + * allowed if a specific buffer count has been set. + * + * Buffers MUST be queued in the same order than they were dequeued. + * + * Returns 0 on success or -errno on error. + */ + int (*queueBuffer)(struct ANativeWindow* window, + struct ANativeWindowBuffer* buffer); + + /* + * hook used to retrieve information about the native window. + * + * Returns 0 on success or -errno on error. + */ + int (*query)(const struct ANativeWindow* window, + int what, int* value); + + /* + * hook used to perform various operations on the surface. + * (*perform)() is a generic mechanism to add functionality to + * ANativeWindow while keeping backward binary compatibility. + * + * DO NOT CALL THIS HOOK DIRECTLY. Instead, use the helper functions + * defined below. + * + * (*perform)() returns -ENOENT if the 'what' parameter is not supported + * by the surface's implementation. + * + * The valid operations are: + * NATIVE_WINDOW_SET_USAGE + * NATIVE_WINDOW_CONNECT (deprecated) + * NATIVE_WINDOW_DISCONNECT (deprecated) + * NATIVE_WINDOW_SET_CROP + * NATIVE_WINDOW_SET_BUFFER_COUNT + * NATIVE_WINDOW_SET_BUFFERS_GEOMETRY (deprecated) + * NATIVE_WINDOW_SET_BUFFERS_TRANSFORM + * NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP + * NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS + * NATIVE_WINDOW_SET_BUFFERS_FORMAT + * NATIVE_WINDOW_SET_SCALING_MODE + * NATIVE_WINDOW_LOCK (private) + * NATIVE_WINDOW_UNLOCK_AND_POST (private) + * NATIVE_WINDOW_API_CONNECT (private) + * NATIVE_WINDOW_API_DISCONNECT (private) + * + */ + + int (*perform)(struct ANativeWindow* window, + int operation, ... ); + + /* + * Hook used to cancel a buffer that has been dequeued. + * No synchronization is performed between dequeue() and cancel(), so + * either external synchronization is needed, or these functions must be + * called from the same thread. + * + * The window holds a reference to the buffer between dequeueBuffer and + * either queueBuffer or cancelBuffer, so clients only need their own + * reference if they might use the buffer after queueing or canceling it. + * Holding a reference to a buffer after queueing or canceling it is only + * allowed if a specific buffer count has been set. + */ + int (*cancelBuffer)(struct ANativeWindow* window, + struct ANativeWindowBuffer* buffer); + + + void* reserved_proc[2]; +}; + + /* Backwards compatibility: use ANativeWindow (struct ANativeWindow in C). + * android_native_window_t is deprecated. + */ +typedef struct ANativeWindow ANativeWindow; +typedef struct ANativeWindow android_native_window_t; + +/* + * native_window_set_usage(..., usage) + * Sets the intended usage flags for the next buffers + * acquired with (*lockBuffer)() and on. + * By default (if this function is never called), a usage of + * GRALLOC_USAGE_HW_RENDER | GRALLOC_USAGE_HW_TEXTURE + * is assumed. + * Calling this function will usually cause following buffers to be + * reallocated. + */ + +static inline int native_window_set_usage( + struct ANativeWindow* window, int usage) +{ + return window->perform(window, NATIVE_WINDOW_SET_USAGE, usage); +} + +/* deprecated. Always returns 0. Don't call. */ +static inline int native_window_connect( + struct ANativeWindow* window, int api) { + return 0; +} + +/* deprecated. Always returns 0. Don't call. */ +static inline int native_window_disconnect( + struct ANativeWindow* window, int api) { + return 0; +} + +/* + * native_window_set_crop(..., crop) + * Sets which region of the next queued buffers needs to be considered. + * A buffer's crop region is scaled to match the surface's size. + * + * The specified crop region applies to all buffers queued after it is called. + * + * if 'crop' is NULL, subsequently queued buffers won't be cropped. + * + * An error is returned if for instance the crop region is invalid, + * out of the buffer's bound or if the window is invalid. + */ +static inline int native_window_set_crop( + struct ANativeWindow* window, + android_native_rect_t const * crop) +{ + return window->perform(window, NATIVE_WINDOW_SET_CROP, crop); +} + +/* + * native_window_set_buffer_count(..., count) + * Sets the number of buffers associated with this native window. + */ +static inline int native_window_set_buffer_count( + struct ANativeWindow* window, + size_t bufferCount) +{ + return window->perform(window, NATIVE_WINDOW_SET_BUFFER_COUNT, bufferCount); +} + +/* + * native_window_set_buffers_geometry(..., int w, int h, int format) + * All buffers dequeued after this call will have the dimensions and format + * specified. A successful call to this function has the same effect as calling + * native_window_set_buffers_size and native_window_set_buffers_format. + * + * XXX: This function is deprecated. The native_window_set_buffers_dimensions + * and native_window_set_buffers_format functions should be used instead. + */ +static inline int native_window_set_buffers_geometry( + struct ANativeWindow* window, + int w, int h, int format) +{ + return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_GEOMETRY, + w, h, format); +} + +/* + * native_window_set_buffers_dimensions(..., int w, int h) + * All buffers dequeued after this call will have the dimensions specified. + * In particular, all buffers will have a fixed-size, independent form the + * native-window size. They will be scaled according to the scaling mode + * (see native_window_set_scaling_mode) upon window composition. + * + * If w and h are 0, the normal behavior is restored. That is, dequeued buffers + * following this call will be sized to match the window's size. + * + * Calling this function will reset the window crop to a NULL value, which + * disables cropping of the buffers. + */ +static inline int native_window_set_buffers_dimensions( + struct ANativeWindow* window, + int w, int h) +{ + return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS, + w, h); +} + +/* + * native_window_set_buffers_format(..., int format) + * All buffers dequeued after this call will have the format specified. + * + * If the specified format is 0, the default buffer format will be used. + */ +static inline int native_window_set_buffers_format( + struct ANativeWindow* window, + int format) +{ + return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_FORMAT, format); +} + +/* + * native_window_set_buffers_transform(..., int transform) + * All buffers queued after this call will be displayed transformed according + * to the transform parameter specified. + */ +static inline int native_window_set_buffers_transform( + struct ANativeWindow* window, + int transform) +{ + return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_TRANSFORM, + transform); +} + +/* + * native_window_set_buffers_timestamp(..., int64_t timestamp) + * All buffers queued after this call will be associated with the timestamp + * parameter specified. If the timestamp is set to NATIVE_WINDOW_TIMESTAMP_AUTO + * (the default), timestamps will be generated automatically when queueBuffer is + * called. The timestamp is measured in nanoseconds, and is normally monotonically + * increasing. The timestamp should be unaffected by time-of-day adjustments, + * and for a camera should be strictly monotonic but for a media player may be + * reset when the position is set. + */ +static inline int native_window_set_buffers_timestamp( + struct ANativeWindow* window, + int64_t timestamp) +{ + return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP, + timestamp); +} + +/* + * native_window_set_scaling_mode(..., int mode) + * All buffers queued after this call will be associated with the scaling mode + * specified. + */ +static inline int native_window_set_scaling_mode( + struct ANativeWindow* window, + int mode) +{ + return window->perform(window, NATIVE_WINDOW_SET_SCALING_MODE, + mode); +} + + +/* + * native_window_api_connect(..., int api) + * connects an API to this window. only one API can be connected at a time. + * Returns -EINVAL if for some reason the window cannot be connected, which + * can happen if it's connected to some other API. + */ +static inline int native_window_api_connect( + struct ANativeWindow* window, int api) +{ + return window->perform(window, NATIVE_WINDOW_API_CONNECT, api); +} + +/* + * native_window_api_disconnect(..., int api) + * disconnect the API from this window. + * An error is returned if for instance the window wasn't connected in the + * first place. + */ +static inline int native_window_api_disconnect( + struct ANativeWindow* window, int api) +{ + return window->perform(window, NATIVE_WINDOW_API_DISCONNECT, api); +} + + +__END_DECLS + +#endif /* SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H */ |