summaryrefslogtreecommitdiffstats
path: root/media/libopus/celt/mips
diff options
context:
space:
mode:
Diffstat (limited to 'media/libopus/celt/mips')
-rw-r--r--media/libopus/celt/mips/celt_mipsr1.h151
-rw-r--r--media/libopus/celt/mips/fixed_generic_mipsr1.h126
-rw-r--r--media/libopus/celt/mips/kiss_fft_mipsr1.h167
-rw-r--r--media/libopus/celt/mips/mdct_mipsr1.h288
-rw-r--r--media/libopus/celt/mips/pitch_mipsr1.h161
-rw-r--r--media/libopus/celt/mips/vq_mipsr1.h125
6 files changed, 1018 insertions, 0 deletions
diff --git a/media/libopus/celt/mips/celt_mipsr1.h b/media/libopus/celt/mips/celt_mipsr1.h
new file mode 100644
index 000000000..e85661a66
--- /dev/null
+++ b/media/libopus/celt/mips/celt_mipsr1.h
@@ -0,0 +1,151 @@
+/* Copyright (c) 2007-2008 CSIRO
+ Copyright (c) 2007-2010 Xiph.Org Foundation
+ Copyright (c) 2008 Gregory Maxwell
+ Written by Jean-Marc Valin and Gregory Maxwell */
+/*
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef __CELT_MIPSR1_H__
+#define __CELT_MIPSR1_H__
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#define CELT_C
+
+#include "os_support.h"
+#include "mdct.h"
+#include <math.h>
+#include "celt.h"
+#include "pitch.h"
+#include "bands.h"
+#include "modes.h"
+#include "entcode.h"
+#include "quant_bands.h"
+#include "rate.h"
+#include "stack_alloc.h"
+#include "mathops.h"
+#include "float_cast.h"
+#include <stdarg.h>
+#include "celt_lpc.h"
+#include "vq.h"
+
+#define OVERRIDE_comb_filter
+void comb_filter(opus_val32 *y, opus_val32 *x, int T0, int T1, int N,
+ opus_val16 g0, opus_val16 g1, int tapset0, int tapset1,
+ const opus_val16 *window, int overlap, int arch)
+{
+ int i;
+ opus_val32 x0, x1, x2, x3, x4;
+
+ (void)arch;
+
+ /* printf ("%d %d %f %f\n", T0, T1, g0, g1); */
+ opus_val16 g00, g01, g02, g10, g11, g12;
+ static const opus_val16 gains[3][3] = {
+ {QCONST16(0.3066406250f, 15), QCONST16(0.2170410156f, 15), QCONST16(0.1296386719f, 15)},
+ {QCONST16(0.4638671875f, 15), QCONST16(0.2680664062f, 15), QCONST16(0.f, 15)},
+ {QCONST16(0.7998046875f, 15), QCONST16(0.1000976562f, 15), QCONST16(0.f, 15)}};
+
+ if (g0==0 && g1==0)
+ {
+ /* OPT: Happens to work without the OPUS_MOVE(), but only because the current encoder already copies x to y */
+ if (x!=y)
+ OPUS_MOVE(y, x, N);
+ return;
+ }
+
+ g00 = MULT16_16_P15(g0, gains[tapset0][0]);
+ g01 = MULT16_16_P15(g0, gains[tapset0][1]);
+ g02 = MULT16_16_P15(g0, gains[tapset0][2]);
+ g10 = MULT16_16_P15(g1, gains[tapset1][0]);
+ g11 = MULT16_16_P15(g1, gains[tapset1][1]);
+ g12 = MULT16_16_P15(g1, gains[tapset1][2]);
+ x1 = x[-T1+1];
+ x2 = x[-T1 ];
+ x3 = x[-T1-1];
+ x4 = x[-T1-2];
+ /* If the filter didn't change, we don't need the overlap */
+ if (g0==g1 && T0==T1 && tapset0==tapset1)
+ overlap=0;
+
+ for (i=0;i<overlap;i++)
+ {
+ opus_val16 f;
+ opus_val32 res;
+ f = MULT16_16_Q15(window[i],window[i]);
+ x0= x[i-T1+2];
+
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15((Q15ONE-f),g00)), "r" ((int)x[i-T0]));
+
+ asm volatile("MADD $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15((Q15ONE-f),g01)), "r" ((int)ADD32(x[i-T0-1],x[i-T0+1])));
+ asm volatile("MADD $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15((Q15ONE-f),g02)), "r" ((int)ADD32(x[i-T0-2],x[i-T0+2])));
+ asm volatile("MADD $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15(f,g10)), "r" ((int)x2));
+ asm volatile("MADD $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15(f,g11)), "r" ((int)ADD32(x3,x1)));
+ asm volatile("MADD $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15(f,g12)), "r" ((int)ADD32(x4,x0)));
+
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (res): "i" (15));
+
+ y[i] = x[i] + res;
+
+ x4=x3;
+ x3=x2;
+ x2=x1;
+ x1=x0;
+ }
+
+ x4 = x[i-T1-2];
+ x3 = x[i-T1-1];
+ x2 = x[i-T1];
+ x1 = x[i-T1+1];
+
+ if (g1==0)
+ {
+ /* OPT: Happens to work without the OPUS_MOVE(), but only because the current encoder already copies x to y */
+ if (x!=y)
+ OPUS_MOVE(y+overlap, x+overlap, N-overlap);
+ return;
+ }
+
+ for (i=overlap;i<N;i++)
+ {
+ opus_val32 res;
+ x0=x[i-T1+2];
+
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)g10), "r" ((int)x2));
+
+ asm volatile("MADD $ac1, %0, %1" : : "r" ((int)g11), "r" ((int)ADD32(x3,x1)));
+ asm volatile("MADD $ac1, %0, %1" : : "r" ((int)g12), "r" ((int)ADD32(x4,x0)));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (res): "i" (15));
+ y[i] = x[i] + res;
+ x4=x3;
+ x3=x2;
+ x2=x1;
+ x1=x0;
+ }
+}
+
+#endif /* __CELT_MIPSR1_H__ */
diff --git a/media/libopus/celt/mips/fixed_generic_mipsr1.h b/media/libopus/celt/mips/fixed_generic_mipsr1.h
new file mode 100644
index 000000000..4a05efbf8
--- /dev/null
+++ b/media/libopus/celt/mips/fixed_generic_mipsr1.h
@@ -0,0 +1,126 @@
+/* Copyright (C) 2007-2009 Xiph.Org Foundation
+ Copyright (C) 2003-2008 Jean-Marc Valin
+ Copyright (C) 2007-2008 CSIRO */
+/**
+ @file fixed_generic.h
+ @brief Generic fixed-point operations
+*/
+/*
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef CELT_FIXED_GENERIC_MIPSR1_H
+#define CELT_FIXED_GENERIC_MIPSR1_H
+
+#undef MULT16_32_Q15_ADD
+static inline int MULT16_32_Q15_ADD(int a, int b, int c, int d) {
+ int m;
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+ asm volatile("madd $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+ return m;
+}
+
+#undef MULT16_32_Q15_SUB
+static inline int MULT16_32_Q15_SUB(int a, int b, int c, int d) {
+ int m;
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+ asm volatile("msub $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+ return m;
+}
+
+#undef MULT16_16_Q15_ADD
+static inline int MULT16_16_Q15_ADD(int a, int b, int c, int d) {
+ int m;
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+ asm volatile("madd $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+ return m;
+}
+
+#undef MULT16_16_Q15_SUB
+static inline int MULT16_16_Q15_SUB(int a, int b, int c, int d) {
+ int m;
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+ asm volatile("msub $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+ return m;
+}
+
+
+#undef MULT16_32_Q16
+static inline int MULT16_32_Q16(int a, int b)
+{
+ int c;
+ asm volatile("MULT $ac1,%0, %1" : : "r" (a), "r" (b));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (c): "i" (16));
+ return c;
+}
+
+#undef MULT16_32_P16
+static inline int MULT16_32_P16(int a, int b)
+{
+ int c;
+ asm volatile("MULT $ac1, %0, %1" : : "r" (a), "r" (b));
+ asm volatile("EXTR_R.W %0,$ac1, %1" : "=r" (c): "i" (16));
+ return c;
+}
+
+#undef MULT16_32_Q15
+static inline int MULT16_32_Q15(int a, int b)
+{
+ int c;
+ asm volatile("MULT $ac1, %0, %1" : : "r" (a), "r" (b));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (c): "i" (15));
+ return c;
+}
+
+#undef MULT32_32_Q31
+static inline int MULT32_32_Q31(int a, int b)
+{
+ int r;
+ asm volatile("MULT $ac1, %0, %1" : : "r" (a), "r" (b));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (r): "i" (31));
+ return r;
+}
+
+#undef PSHR32
+static inline int PSHR32(int a, int shift)
+{
+ int r;
+ asm volatile ("SHRAV_R.W %0, %1, %2" :"=r" (r): "r" (a), "r" (shift));
+ return r;
+}
+
+#undef MULT16_16_P15
+static inline int MULT16_16_P15(int a, int b)
+{
+ int r;
+ asm volatile ("mul %0, %1, %2" :"=r" (r): "r" (a), "r" (b));
+ asm volatile ("SHRA_R.W %0, %1, %2" : "+r" (r): "0" (r), "i"(15));
+ return r;
+}
+
+#endif /* CELT_FIXED_GENERIC_MIPSR1_H */
diff --git a/media/libopus/celt/mips/kiss_fft_mipsr1.h b/media/libopus/celt/mips/kiss_fft_mipsr1.h
new file mode 100644
index 000000000..400ca4de9
--- /dev/null
+++ b/media/libopus/celt/mips/kiss_fft_mipsr1.h
@@ -0,0 +1,167 @@
+/*Copyright (c) 2013, Xiph.Org Foundation and contributors.
+
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.*/
+
+#ifndef KISS_FFT_MIPSR1_H
+#define KISS_FFT_MIPSR1_H
+
+#if !defined(KISS_FFT_GUTS_H)
+#error "This file should only be included from _kiss_fft_guts.h"
+#endif
+
+#ifdef FIXED_POINT
+
+#define S_MUL_ADD(a, b, c, d) (S_MUL(a,b)+S_MUL(c,d))
+#define S_MUL_SUB(a, b, c, d) (S_MUL(a,b)-S_MUL(c,d))
+
+#undef S_MUL_ADD
+static inline int S_MUL_ADD(int a, int b, int c, int d) {
+ int m;
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+ asm volatile("madd $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+ return m;
+}
+
+#undef S_MUL_SUB
+static inline int S_MUL_SUB(int a, int b, int c, int d) {
+ int m;
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+ asm volatile("msub $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+ return m;
+}
+
+#undef C_MUL
+# define C_MUL(m,a,b) (m=C_MUL_fun(a,b))
+static inline kiss_fft_cpx C_MUL_fun(kiss_fft_cpx a, kiss_twiddle_cpx b) {
+ kiss_fft_cpx m;
+
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a.r), "r" ((int)b.r));
+ asm volatile("msub $ac1, %0, %1" : : "r" ((int)a.i), "r" ((int)b.i));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m.r): "i" (15));
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a.r), "r" ((int)b.i));
+ asm volatile("madd $ac1, %0, %1" : : "r" ((int)a.i), "r" ((int)b.r));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m.i): "i" (15));
+
+ return m;
+}
+#undef C_MULC
+# define C_MULC(m,a,b) (m=C_MULC_fun(a,b))
+static inline kiss_fft_cpx C_MULC_fun(kiss_fft_cpx a, kiss_twiddle_cpx b) {
+ kiss_fft_cpx m;
+
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a.r), "r" ((int)b.r));
+ asm volatile("madd $ac1, %0, %1" : : "r" ((int)a.i), "r" ((int)b.i));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m.r): "i" (15));
+ asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a.i), "r" ((int)b.r));
+ asm volatile("msub $ac1, %0, %1" : : "r" ((int)a.r), "r" ((int)b.i));
+ asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m.i): "i" (15));
+
+ return m;
+}
+
+#endif /* FIXED_POINT */
+
+#define OVERRIDE_kf_bfly5
+static void kf_bfly5(
+ kiss_fft_cpx * Fout,
+ const size_t fstride,
+ const kiss_fft_state *st,
+ int m,
+ int N,
+ int mm
+ )
+{
+ kiss_fft_cpx *Fout0,*Fout1,*Fout2,*Fout3,*Fout4;
+ int i, u;
+ kiss_fft_cpx scratch[13];
+
+ const kiss_twiddle_cpx *tw;
+ kiss_twiddle_cpx ya,yb;
+ kiss_fft_cpx * Fout_beg = Fout;
+
+#ifdef FIXED_POINT
+ ya.r = 10126;
+ ya.i = -31164;
+ yb.r = -26510;
+ yb.i = -19261;
+#else
+ ya = st->twiddles[fstride*m];
+ yb = st->twiddles[fstride*2*m];
+#endif
+
+ tw=st->twiddles;
+
+ for (i=0;i<N;i++)
+ {
+ Fout = Fout_beg + i*mm;
+ Fout0=Fout;
+ Fout1=Fout0+m;
+ Fout2=Fout0+2*m;
+ Fout3=Fout0+3*m;
+ Fout4=Fout0+4*m;
+
+ /* For non-custom modes, m is guaranteed to be a multiple of 4. */
+ for ( u=0; u<m; ++u ) {
+ scratch[0] = *Fout0;
+
+
+ C_MUL(scratch[1] ,*Fout1, tw[u*fstride]);
+ C_MUL(scratch[2] ,*Fout2, tw[2*u*fstride]);
+ C_MUL(scratch[3] ,*Fout3, tw[3*u*fstride]);
+ C_MUL(scratch[4] ,*Fout4, tw[4*u*fstride]);
+
+ C_ADD( scratch[7],scratch[1],scratch[4]);
+ C_SUB( scratch[10],scratch[1],scratch[4]);
+ C_ADD( scratch[8],scratch[2],scratch[3]);
+ C_SUB( scratch[9],scratch[2],scratch[3]);
+
+ Fout0->r += scratch[7].r + scratch[8].r;
+ Fout0->i += scratch[7].i + scratch[8].i;
+ scratch[5].r = scratch[0].r + S_MUL_ADD(scratch[7].r,ya.r,scratch[8].r,yb.r);
+ scratch[5].i = scratch[0].i + S_MUL_ADD(scratch[7].i,ya.r,scratch[8].i,yb.r);
+
+ scratch[6].r = S_MUL_ADD(scratch[10].i,ya.i,scratch[9].i,yb.i);
+ scratch[6].i = -S_MUL_ADD(scratch[10].r,ya.i,scratch[9].r,yb.i);
+
+ C_SUB(*Fout1,scratch[5],scratch[6]);
+ C_ADD(*Fout4,scratch[5],scratch[6]);
+
+ scratch[11].r = scratch[0].r + S_MUL_ADD(scratch[7].r,yb.r,scratch[8].r,ya.r);
+ scratch[11].i = scratch[0].i + S_MUL_ADD(scratch[7].i,yb.r,scratch[8].i,ya.r);
+
+ scratch[12].r = S_MUL_SUB(scratch[9].i,ya.i,scratch[10].i,yb.i);
+ scratch[12].i = S_MUL_SUB(scratch[10].r,yb.i,scratch[9].r,ya.i);
+
+ C_ADD(*Fout2,scratch[11],scratch[12]);
+ C_SUB(*Fout3,scratch[11],scratch[12]);
+
+ ++Fout0;++Fout1;++Fout2;++Fout3;++Fout4;
+ }
+ }
+}
+
+
+#endif /* KISS_FFT_MIPSR1_H */
diff --git a/media/libopus/celt/mips/mdct_mipsr1.h b/media/libopus/celt/mips/mdct_mipsr1.h
new file mode 100644
index 000000000..2934dab77
--- /dev/null
+++ b/media/libopus/celt/mips/mdct_mipsr1.h
@@ -0,0 +1,288 @@
+/* Copyright (c) 2007-2008 CSIRO
+ Copyright (c) 2007-2008 Xiph.Org Foundation
+ Written by Jean-Marc Valin */
+/*
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/* This is a simple MDCT implementation that uses a N/4 complex FFT
+ to do most of the work. It should be relatively straightforward to
+ plug in pretty much and FFT here.
+
+ This replaces the Vorbis FFT (and uses the exact same API), which
+ was a bit too messy and that was ending up duplicating code
+ (might as well use the same FFT everywhere).
+
+ The algorithm is similar to (and inspired from) Fabrice Bellard's
+ MDCT implementation in FFMPEG, but has differences in signs, ordering
+ and scaling in many places.
+*/
+#ifndef __MDCT_MIPSR1_H__
+#define __MDCT_MIPSR1_H__
+
+#ifndef SKIP_CONFIG_H
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+#endif
+
+#include "mdct.h"
+#include "kiss_fft.h"
+#include "_kiss_fft_guts.h"
+#include <math.h>
+#include "os_support.h"
+#include "mathops.h"
+#include "stack_alloc.h"
+
+/* Forward MDCT trashes the input array */
+#define OVERRIDE_clt_mdct_forward
+void clt_mdct_forward(const mdct_lookup *l, kiss_fft_scalar *in, kiss_fft_scalar * OPUS_RESTRICT out,
+ const opus_val16 *window, int overlap, int shift, int stride, int arch)
+{
+ int i;
+ int N, N2, N4;
+ VARDECL(kiss_fft_scalar, f);
+ VARDECL(kiss_fft_cpx, f2);
+ const kiss_fft_state *st = l->kfft[shift];
+ const kiss_twiddle_scalar *trig;
+ opus_val16 scale;
+#ifdef FIXED_POINT
+ /* Allows us to scale with MULT16_32_Q16(), which is faster than
+ MULT16_32_Q15() on ARM. */
+ int scale_shift = st->scale_shift-1;
+#endif
+
+ (void)arch;
+
+ SAVE_STACK;
+ scale = st->scale;
+
+ N = l->n;
+ trig = l->trig;
+ for (i=0;i<shift;i++)
+ {
+ N >>= 1;
+ trig += N;
+ }
+ N2 = N>>1;
+ N4 = N>>2;
+
+ ALLOC(f, N2, kiss_fft_scalar);
+ ALLOC(f2, N4, kiss_fft_cpx);
+
+ /* Consider the input to be composed of four blocks: [a, b, c, d] */
+ /* Window, shuffle, fold */
+ {
+ /* Temp pointers to make it really clear to the compiler what we're doing */
+ const kiss_fft_scalar * OPUS_RESTRICT xp1 = in+(overlap>>1);
+ const kiss_fft_scalar * OPUS_RESTRICT xp2 = in+N2-1+(overlap>>1);
+ kiss_fft_scalar * OPUS_RESTRICT yp = f;
+ const opus_val16 * OPUS_RESTRICT wp1 = window+(overlap>>1);
+ const opus_val16 * OPUS_RESTRICT wp2 = window+(overlap>>1)-1;
+ for(i=0;i<((overlap+3)>>2);i++)
+ {
+ /* Real part arranged as -d-cR, Imag part arranged as -b+aR*/
+ *yp++ = S_MUL_ADD(*wp2, xp1[N2],*wp1,*xp2);
+ *yp++ = S_MUL_SUB(*wp1, *xp1,*wp2, xp2[-N2]);
+ xp1+=2;
+ xp2-=2;
+ wp1+=2;
+ wp2-=2;
+ }
+ wp1 = window;
+ wp2 = window+overlap-1;
+ for(;i<N4-((overlap+3)>>2);i++)
+ {
+ /* Real part arranged as a-bR, Imag part arranged as -c-dR */
+ *yp++ = *xp2;
+ *yp++ = *xp1;
+ xp1+=2;
+ xp2-=2;
+ }
+ for(;i<N4;i++)
+ {
+ /* Real part arranged as a-bR, Imag part arranged as -c-dR */
+ *yp++ = S_MUL_SUB(*wp2, *xp2, *wp1, xp1[-N2]);
+ *yp++ = S_MUL_ADD(*wp2, *xp1, *wp1, xp2[N2]);
+ xp1+=2;
+ xp2-=2;
+ wp1+=2;
+ wp2-=2;
+ }
+ }
+ /* Pre-rotation */
+ {
+ kiss_fft_scalar * OPUS_RESTRICT yp = f;
+ const kiss_twiddle_scalar *t = &trig[0];
+ for(i=0;i<N4;i++)
+ {
+ kiss_fft_cpx yc;
+ kiss_twiddle_scalar t0, t1;
+ kiss_fft_scalar re, im, yr, yi;
+ t0 = t[i];
+ t1 = t[N4+i];
+ re = *yp++;
+ im = *yp++;
+
+ yr = S_MUL_SUB(re,t0,im,t1);
+ yi = S_MUL_ADD(im,t0,re,t1);
+
+ yc.r = yr;
+ yc.i = yi;
+ yc.r = PSHR32(MULT16_32_Q16(scale, yc.r), scale_shift);
+ yc.i = PSHR32(MULT16_32_Q16(scale, yc.i), scale_shift);
+ f2[st->bitrev[i]] = yc;
+ }
+ }
+
+ /* N/4 complex FFT, does not downscale anymore */
+ opus_fft_impl(st, f2);
+
+ /* Post-rotate */
+ {
+ /* Temp pointers to make it really clear to the compiler what we're doing */
+ const kiss_fft_cpx * OPUS_RESTRICT fp = f2;
+ kiss_fft_scalar * OPUS_RESTRICT yp1 = out;
+ kiss_fft_scalar * OPUS_RESTRICT yp2 = out+stride*(N2-1);
+ const kiss_twiddle_scalar *t = &trig[0];
+ /* Temp pointers to make it really clear to the compiler what we're doing */
+ for(i=0;i<N4;i++)
+ {
+ kiss_fft_scalar yr, yi;
+ yr = S_MUL_SUB(fp->i,t[N4+i] , fp->r,t[i]);
+ yi = S_MUL_ADD(fp->r,t[N4+i] ,fp->i,t[i]);
+ *yp1 = yr;
+ *yp2 = yi;
+ fp++;
+ yp1 += 2*stride;
+ yp2 -= 2*stride;
+ }
+ }
+ RESTORE_STACK;
+}
+
+#define OVERRIDE_clt_mdct_backward
+void clt_mdct_backward(const mdct_lookup *l, kiss_fft_scalar *in, kiss_fft_scalar * OPUS_RESTRICT out,
+ const opus_val16 * OPUS_RESTRICT window, int overlap, int shift, int stride, int arch)
+{
+ int i;
+ int N, N2, N4;
+ const kiss_twiddle_scalar *trig;
+
+ (void)arch;
+
+ N = l->n;
+ trig = l->trig;
+ for (i=0;i<shift;i++)
+ {
+ N >>= 1;
+ trig += N;
+ }
+ N2 = N>>1;
+ N4 = N>>2;
+
+ /* Pre-rotate */
+ {
+ /* Temp pointers to make it really clear to the compiler what we're doing */
+ const kiss_fft_scalar * OPUS_RESTRICT xp1 = in;
+ const kiss_fft_scalar * OPUS_RESTRICT xp2 = in+stride*(N2-1);
+ kiss_fft_scalar * OPUS_RESTRICT yp = out+(overlap>>1);
+ const kiss_twiddle_scalar * OPUS_RESTRICT t = &trig[0];
+ const opus_int16 * OPUS_RESTRICT bitrev = l->kfft[shift]->bitrev;
+ for(i=0;i<N4;i++)
+ {
+ int rev;
+ kiss_fft_scalar yr, yi;
+ rev = *bitrev++;
+ yr = S_MUL_ADD(*xp2, t[i] , *xp1, t[N4+i]);
+ yi = S_MUL_SUB(*xp1, t[i] , *xp2, t[N4+i]);
+ /* We swap real and imag because we use an FFT instead of an IFFT. */
+ yp[2*rev+1] = yr;
+ yp[2*rev] = yi;
+ /* Storing the pre-rotation directly in the bitrev order. */
+ xp1+=2*stride;
+ xp2-=2*stride;
+ }
+ }
+
+ opus_fft_impl(l->kfft[shift], (kiss_fft_cpx*)(out+(overlap>>1)));
+
+ /* Post-rotate and de-shuffle from both ends of the buffer at once to make
+ it in-place. */
+ {
+ kiss_fft_scalar * OPUS_RESTRICT yp0 = out+(overlap>>1);
+ kiss_fft_scalar * OPUS_RESTRICT yp1 = out+(overlap>>1)+N2-2;
+ const kiss_twiddle_scalar *t = &trig[0];
+ /* Loop to (N4+1)>>1 to handle odd N4. When N4 is odd, the
+ middle pair will be computed twice. */
+ for(i=0;i<(N4+1)>>1;i++)
+ {
+ kiss_fft_scalar re, im, yr, yi;
+ kiss_twiddle_scalar t0, t1;
+ /* We swap real and imag because we're using an FFT instead of an IFFT. */
+ re = yp0[1];
+ im = yp0[0];
+ t0 = t[i];
+ t1 = t[N4+i];
+ /* We'd scale up by 2 here, but instead it's done when mixing the windows */
+ yr = S_MUL_ADD(re,t0 , im,t1);
+ yi = S_MUL_SUB(re,t1 , im,t0);
+ /* We swap real and imag because we're using an FFT instead of an IFFT. */
+ re = yp1[1];
+ im = yp1[0];
+ yp0[0] = yr;
+ yp1[1] = yi;
+
+ t0 = t[(N4-i-1)];
+ t1 = t[(N2-i-1)];
+ /* We'd scale up by 2 here, but instead it's done when mixing the windows */
+ yr = S_MUL_ADD(re,t0,im,t1);
+ yi = S_MUL_SUB(re,t1,im,t0);
+ yp1[0] = yr;
+ yp0[1] = yi;
+ yp0 += 2;
+ yp1 -= 2;
+ }
+ }
+
+ /* Mirror on both sides for TDAC */
+ {
+ kiss_fft_scalar * OPUS_RESTRICT xp1 = out+overlap-1;
+ kiss_fft_scalar * OPUS_RESTRICT yp1 = out;
+ const opus_val16 * OPUS_RESTRICT wp1 = window;
+ const opus_val16 * OPUS_RESTRICT wp2 = window+overlap-1;
+
+ for(i = 0; i < overlap/2; i++)
+ {
+ kiss_fft_scalar x1, x2;
+ x1 = *xp1;
+ x2 = *yp1;
+ *yp1++ = MULT16_32_Q15(*wp2, x2) - MULT16_32_Q15(*wp1, x1);
+ *xp1-- = MULT16_32_Q15(*wp1, x2) + MULT16_32_Q15(*wp2, x1);
+ wp1++;
+ wp2--;
+ }
+ }
+}
+#endif /* __MDCT_MIPSR1_H__ */
diff --git a/media/libopus/celt/mips/pitch_mipsr1.h b/media/libopus/celt/mips/pitch_mipsr1.h
new file mode 100644
index 000000000..a9500aff5
--- /dev/null
+++ b/media/libopus/celt/mips/pitch_mipsr1.h
@@ -0,0 +1,161 @@
+/* Copyright (c) 2007-2008 CSIRO
+ Copyright (c) 2007-2009 Xiph.Org Foundation
+ Written by Jean-Marc Valin */
+/**
+ @file pitch.h
+ @brief Pitch analysis
+ */
+
+/*
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef PITCH_MIPSR1_H
+#define PITCH_MIPSR1_H
+
+#define OVERRIDE_DUAL_INNER_PROD
+static inline void dual_inner_prod(const opus_val16 *x, const opus_val16 *y01, const opus_val16 *y02,
+ int N, opus_val32 *xy1, opus_val32 *xy2, int arch)
+{
+ int j;
+ opus_val32 xy01=0;
+ opus_val32 xy02=0;
+
+ (void)arch;
+
+ asm volatile("MULT $ac1, $0, $0");
+ asm volatile("MULT $ac2, $0, $0");
+ /* Compute the norm of X+Y and X-Y as |X|^2 + |Y|^2 +/- sum(xy) */
+ for (j=0;j<N;j++)
+ {
+ asm volatile("MADD $ac1, %0, %1" : : "r" ((int)x[j]), "r" ((int)y01[j]));
+ asm volatile("MADD $ac2, %0, %1" : : "r" ((int)x[j]), "r" ((int)y02[j]));
+ ++j;
+ asm volatile("MADD $ac1, %0, %1" : : "r" ((int)x[j]), "r" ((int)y01[j]));
+ asm volatile("MADD $ac2, %0, %1" : : "r" ((int)x[j]), "r" ((int)y02[j]));
+ }
+ asm volatile ("mflo %0, $ac1": "=r"(xy01));
+ asm volatile ("mflo %0, $ac2": "=r"(xy02));
+ *xy1 = xy01;
+ *xy2 = xy02;
+}
+
+static inline void xcorr_kernel_mips(const opus_val16 * x,
+ const opus_val16 * y, opus_val32 sum[4], int len)
+{
+ int j;
+ opus_val16 y_0, y_1, y_2, y_3;
+
+ opus_int64 sum_0, sum_1, sum_2, sum_3;
+ sum_0 = (opus_int64)sum[0];
+ sum_1 = (opus_int64)sum[1];
+ sum_2 = (opus_int64)sum[2];
+ sum_3 = (opus_int64)sum[3];
+
+ y_3=0; /* gcc doesn't realize that y_3 can't be used uninitialized */
+ y_0=*y++;
+ y_1=*y++;
+ y_2=*y++;
+ for (j=0;j<len-3;j+=4)
+ {
+ opus_val16 tmp;
+ tmp = *x++;
+ y_3=*y++;
+
+ sum_0 = __builtin_mips_madd( sum_0, tmp, y_0);
+ sum_1 = __builtin_mips_madd( sum_1, tmp, y_1);
+ sum_2 = __builtin_mips_madd( sum_2, tmp, y_2);
+ sum_3 = __builtin_mips_madd( sum_3, tmp, y_3);
+
+ tmp=*x++;
+ y_0=*y++;
+
+ sum_0 = __builtin_mips_madd( sum_0, tmp, y_1 );
+ sum_1 = __builtin_mips_madd( sum_1, tmp, y_2 );
+ sum_2 = __builtin_mips_madd( sum_2, tmp, y_3);
+ sum_3 = __builtin_mips_madd( sum_3, tmp, y_0);
+
+ tmp=*x++;
+ y_1=*y++;
+
+ sum_0 = __builtin_mips_madd( sum_0, tmp, y_2 );
+ sum_1 = __builtin_mips_madd( sum_1, tmp, y_3 );
+ sum_2 = __builtin_mips_madd( sum_2, tmp, y_0);
+ sum_3 = __builtin_mips_madd( sum_3, tmp, y_1);
+
+
+ tmp=*x++;
+ y_2=*y++;
+
+ sum_0 = __builtin_mips_madd( sum_0, tmp, y_3 );
+ sum_1 = __builtin_mips_madd( sum_1, tmp, y_0 );
+ sum_2 = __builtin_mips_madd( sum_2, tmp, y_1);
+ sum_3 = __builtin_mips_madd( sum_3, tmp, y_2);
+
+ }
+ if (j++<len)
+ {
+ opus_val16 tmp = *x++;
+ y_3=*y++;
+
+ sum_0 = __builtin_mips_madd( sum_0, tmp, y_0 );
+ sum_1 = __builtin_mips_madd( sum_1, tmp, y_1 );
+ sum_2 = __builtin_mips_madd( sum_2, tmp, y_2);
+ sum_3 = __builtin_mips_madd( sum_3, tmp, y_3);
+ }
+
+ if (j++<len)
+ {
+ opus_val16 tmp=*x++;
+ y_0=*y++;
+
+ sum_0 = __builtin_mips_madd( sum_0, tmp, y_1 );
+ sum_1 = __builtin_mips_madd( sum_1, tmp, y_2 );
+ sum_2 = __builtin_mips_madd( sum_2, tmp, y_3);
+ sum_3 = __builtin_mips_madd( sum_3, tmp, y_0);
+ }
+
+ if (j<len)
+ {
+ opus_val16 tmp=*x++;
+ y_1=*y++;
+
+ sum_0 = __builtin_mips_madd( sum_0, tmp, y_2 );
+ sum_1 = __builtin_mips_madd( sum_1, tmp, y_3 );
+ sum_2 = __builtin_mips_madd( sum_2, tmp, y_0);
+ sum_3 = __builtin_mips_madd( sum_3, tmp, y_1);
+
+ }
+
+ sum[0] = (opus_val32)sum_0;
+ sum[1] = (opus_val32)sum_1;
+ sum[2] = (opus_val32)sum_2;
+ sum[3] = (opus_val32)sum_3;
+}
+
+#define OVERRIDE_XCORR_KERNEL
+#define xcorr_kernel(x, y, sum, len, arch) \
+ ((void)(arch), xcorr_kernel_mips(x, y, sum, len))
+
+#endif /* PITCH_MIPSR1_H */
diff --git a/media/libopus/celt/mips/vq_mipsr1.h b/media/libopus/celt/mips/vq_mipsr1.h
new file mode 100644
index 000000000..54cef8613
--- /dev/null
+++ b/media/libopus/celt/mips/vq_mipsr1.h
@@ -0,0 +1,125 @@
+/* Copyright (c) 2007-2008 CSIRO
+ Copyright (c) 2007-2009 Xiph.Org Foundation
+ Written by Jean-Marc Valin */
+/*
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef __VQ_MIPSR1_H__
+#define __VQ_MIPSR1_H__
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "mathops.h"
+#include "arch.h"
+
+static unsigned extract_collapse_mask(int *iy, int N, int B);
+static void normalise_residual(int * OPUS_RESTRICT iy, celt_norm * OPUS_RESTRICT X, int N, opus_val32 Ryy, opus_val16 gain);
+static void exp_rotation(celt_norm *X, int len, int dir, int stride, int K, int spread);
+static void renormalise_vector_mips(celt_norm *X, int N, opus_val16 gain, int arch);
+
+#define OVERRIDE_vq_exp_rotation1
+static void exp_rotation1(celt_norm *X, int len, int stride, opus_val16 c, opus_val16 s)
+{
+ int i;
+ opus_val16 ms;
+ celt_norm *Xptr;
+ Xptr = X;
+ ms = NEG16(s);
+ for (i=0;i<len-stride;i++)
+ {
+ celt_norm x1, x2;
+ x1 = Xptr[0];
+ x2 = Xptr[stride];
+ Xptr[stride] = EXTRACT16(PSHR32(MAC16_16(MULT16_16(c, x2), s, x1), 15));
+ *Xptr++ = EXTRACT16(PSHR32(MAC16_16(MULT16_16(c, x1), ms, x2), 15));
+ }
+ Xptr = &X[len-2*stride-1];
+ for (i=len-2*stride-1;i>=0;i--)
+ {
+ celt_norm x1, x2;
+ x1 = Xptr[0];
+ x2 = Xptr[stride];
+ Xptr[stride] = EXTRACT16(PSHR32(MAC16_16(MULT16_16(c, x2), s, x1), 15));
+ *Xptr-- = EXTRACT16(PSHR32(MAC16_16(MULT16_16(c, x1), ms, x2), 15));
+ }
+}
+
+#define OVERRIDE_renormalise_vector
+
+#define renormalise_vector(X, N, gain, arch) \
+ (renormalise_vector_mips(X, N, gain, arch))
+
+void renormalise_vector_mips(celt_norm *X, int N, opus_val16 gain, int arch)
+{
+ int i;
+#ifdef FIXED_POINT
+ int k;
+#endif
+ opus_val32 E = EPSILON;
+ opus_val16 g;
+ opus_val32 t;
+ celt_norm *xptr = X;
+ int X0, X1;
+
+ (void)arch;
+
+ asm volatile("mult $ac1, $0, $0");
+ asm volatile("MTLO %0, $ac1" : :"r" (E));
+ /*if(N %4)
+ printf("error");*/
+ for (i=0;i<N-2;i+=2)
+ {
+ X0 = (int)*xptr++;
+ asm volatile("MADD $ac1, %0, %1" : : "r" (X0), "r" (X0));
+
+ X1 = (int)*xptr++;
+ asm volatile("MADD $ac1, %0, %1" : : "r" (X1), "r" (X1));
+ }
+
+ for (;i<N;i++)
+ {
+ X0 = (int)*xptr++;
+ asm volatile("MADD $ac1, %0, %1" : : "r" (X0), "r" (X0));
+ }
+
+ asm volatile("MFLO %0, $ac1" : "=r" (E));
+#ifdef FIXED_POINT
+ k = celt_ilog2(E)>>1;
+#endif
+ t = VSHR32(E, 2*(k-7));
+ g = MULT16_16_P15(celt_rsqrt_norm(t),gain);
+
+ xptr = X;
+ for (i=0;i<N;i++)
+ {
+ *xptr = EXTRACT16(PSHR32(MULT16_16(g, *xptr), k+1));
+ xptr++;
+ }
+ /*return celt_sqrt(E);*/
+}
+
+#endif /* __VQ_MIPSR1_H__ */