summaryrefslogtreecommitdiffstats
path: root/media/libjpeg/jchuff.c
diff options
context:
space:
mode:
Diffstat (limited to 'media/libjpeg/jchuff.c')
-rw-r--r--media/libjpeg/jchuff.c1091
1 files changed, 1091 insertions, 0 deletions
diff --git a/media/libjpeg/jchuff.c b/media/libjpeg/jchuff.c
new file mode 100644
index 000000000..fffaacebc
--- /dev/null
+++ b/media/libjpeg/jchuff.c
@@ -0,0 +1,1091 @@
+/*
+ * jchuff.c
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * libjpeg-turbo Modifications:
+ * Copyright (C) 2009-2011, 2014-2016, D. R. Commander.
+ * Copyright (C) 2015, Matthieu Darbois.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file contains Huffman entropy encoding routines.
+ *
+ * Much of the complexity here has to do with supporting output suspension.
+ * If the data destination module demands suspension, we want to be able to
+ * back up to the start of the current MCU. To do this, we copy state
+ * variables into local working storage, and update them back to the
+ * permanent JPEG objects only upon successful completion of an MCU.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jsimd.h"
+#include "jconfigint.h"
+#include <limits.h>
+
+/*
+ * NOTE: If USE_CLZ_INTRINSIC is defined, then clz/bsr instructions will be
+ * used for bit counting rather than the lookup table. This will reduce the
+ * memory footprint by 64k, which is important for some mobile applications
+ * that create many isolated instances of libjpeg-turbo (web browsers, for
+ * instance.) This may improve performance on some mobile platforms as well.
+ * This feature is enabled by default only on ARM processors, because some x86
+ * chips have a slow implementation of bsr, and the use of clz/bsr cannot be
+ * shown to have a significant performance impact even on the x86 chips that
+ * have a fast implementation of it. When building for ARMv6, you can
+ * explicitly disable the use of clz/bsr by adding -mthumb to the compiler
+ * flags (this defines __thumb__).
+ */
+
+/* NOTE: Both GCC and Clang define __GNUC__ */
+#if defined __GNUC__ && (defined __arm__ || defined __aarch64__)
+#if !defined __thumb__ || defined __thumb2__
+#define USE_CLZ_INTRINSIC
+#endif
+#endif
+
+#ifdef USE_CLZ_INTRINSIC
+#define JPEG_NBITS_NONZERO(x) (32 - __builtin_clz(x))
+#define JPEG_NBITS(x) (x ? JPEG_NBITS_NONZERO(x) : 0)
+#else
+#include "jpeg_nbits_table.h"
+#define JPEG_NBITS(x) (jpeg_nbits_table[x])
+#define JPEG_NBITS_NONZERO(x) JPEG_NBITS(x)
+#endif
+
+#ifndef min
+ #define min(a,b) ((a)<(b)?(a):(b))
+#endif
+
+
+/* Expanded entropy encoder object for Huffman encoding.
+ *
+ * The savable_state subrecord contains fields that change within an MCU,
+ * but must not be updated permanently until we complete the MCU.
+ */
+
+typedef struct {
+ size_t put_buffer; /* current bit-accumulation buffer */
+ int put_bits; /* # of bits now in it */
+ int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+} savable_state;
+
+/* This macro is to work around compilers with missing or broken
+ * structure assignment. You'll need to fix this code if you have
+ * such a compiler and you change MAX_COMPS_IN_SCAN.
+ */
+
+#ifndef NO_STRUCT_ASSIGN
+#define ASSIGN_STATE(dest,src) ((dest) = (src))
+#else
+#if MAX_COMPS_IN_SCAN == 4
+#define ASSIGN_STATE(dest,src) \
+ ((dest).put_buffer = (src).put_buffer, \
+ (dest).put_bits = (src).put_bits, \
+ (dest).last_dc_val[0] = (src).last_dc_val[0], \
+ (dest).last_dc_val[1] = (src).last_dc_val[1], \
+ (dest).last_dc_val[2] = (src).last_dc_val[2], \
+ (dest).last_dc_val[3] = (src).last_dc_val[3])
+#endif
+#endif
+
+
+typedef struct {
+ struct jpeg_entropy_encoder pub; /* public fields */
+
+ savable_state saved; /* Bit buffer & DC state at start of MCU */
+
+ /* These fields are NOT loaded into local working state. */
+ unsigned int restarts_to_go; /* MCUs left in this restart interval */
+ int next_restart_num; /* next restart number to write (0-7) */
+
+ /* Pointers to derived tables (these workspaces have image lifespan) */
+ c_derived_tbl *dc_derived_tbls[NUM_HUFF_TBLS];
+ c_derived_tbl *ac_derived_tbls[NUM_HUFF_TBLS];
+
+#ifdef ENTROPY_OPT_SUPPORTED /* Statistics tables for optimization */
+ long *dc_count_ptrs[NUM_HUFF_TBLS];
+ long *ac_count_ptrs[NUM_HUFF_TBLS];
+#endif
+
+ int simd;
+} huff_entropy_encoder;
+
+typedef huff_entropy_encoder *huff_entropy_ptr;
+
+/* Working state while writing an MCU.
+ * This struct contains all the fields that are needed by subroutines.
+ */
+
+typedef struct {
+ JOCTET *next_output_byte; /* => next byte to write in buffer */
+ size_t free_in_buffer; /* # of byte spaces remaining in buffer */
+ savable_state cur; /* Current bit buffer & DC state */
+ j_compress_ptr cinfo; /* dump_buffer needs access to this */
+} working_state;
+
+
+/* Forward declarations */
+METHODDEF(boolean) encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data);
+METHODDEF(void) finish_pass_huff (j_compress_ptr cinfo);
+#ifdef ENTROPY_OPT_SUPPORTED
+METHODDEF(boolean) encode_mcu_gather (j_compress_ptr cinfo,
+ JBLOCKROW *MCU_data);
+METHODDEF(void) finish_pass_gather (j_compress_ptr cinfo);
+#endif
+
+
+/*
+ * Initialize for a Huffman-compressed scan.
+ * If gather_statistics is TRUE, we do not output anything during the scan,
+ * just count the Huffman symbols used and generate Huffman code tables.
+ */
+
+METHODDEF(void)
+start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics)
+{
+ huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+ int ci, dctbl, actbl;
+ jpeg_component_info *compptr;
+
+ if (gather_statistics) {
+#ifdef ENTROPY_OPT_SUPPORTED
+ entropy->pub.encode_mcu = encode_mcu_gather;
+ entropy->pub.finish_pass = finish_pass_gather;
+#else
+ ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+ } else {
+ entropy->pub.encode_mcu = encode_mcu_huff;
+ entropy->pub.finish_pass = finish_pass_huff;
+ }
+
+ entropy->simd = jsimd_can_huff_encode_one_block();
+
+ for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+ compptr = cinfo->cur_comp_info[ci];
+ dctbl = compptr->dc_tbl_no;
+ actbl = compptr->ac_tbl_no;
+ if (gather_statistics) {
+#ifdef ENTROPY_OPT_SUPPORTED
+ /* Check for invalid table indexes */
+ /* (make_c_derived_tbl does this in the other path) */
+ if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS)
+ ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl);
+ if (actbl < 0 || actbl >= NUM_HUFF_TBLS)
+ ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl);
+ /* Allocate and zero the statistics tables */
+ /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
+ if (entropy->dc_count_ptrs[dctbl] == NULL)
+ entropy->dc_count_ptrs[dctbl] = (long *)
+ (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+ 257 * sizeof(long));
+ MEMZERO(entropy->dc_count_ptrs[dctbl], 257 * sizeof(long));
+ if (entropy->ac_count_ptrs[actbl] == NULL)
+ entropy->ac_count_ptrs[actbl] = (long *)
+ (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+ 257 * sizeof(long));
+ MEMZERO(entropy->ac_count_ptrs[actbl], 257 * sizeof(long));
+#endif
+ } else {
+ /* Compute derived values for Huffman tables */
+ /* We may do this more than once for a table, but it's not expensive */
+ jpeg_make_c_derived_tbl(cinfo, TRUE, dctbl,
+ & entropy->dc_derived_tbls[dctbl]);
+ jpeg_make_c_derived_tbl(cinfo, FALSE, actbl,
+ & entropy->ac_derived_tbls[actbl]);
+ }
+ /* Initialize DC predictions to 0 */
+ entropy->saved.last_dc_val[ci] = 0;
+ }
+
+ /* Initialize bit buffer to empty */
+ entropy->saved.put_buffer = 0;
+ entropy->saved.put_bits = 0;
+
+ /* Initialize restart stuff */
+ entropy->restarts_to_go = cinfo->restart_interval;
+ entropy->next_restart_num = 0;
+}
+
+
+/*
+ * Compute the derived values for a Huffman table.
+ * This routine also performs some validation checks on the table.
+ *
+ * Note this is also used by jcphuff.c.
+ */
+
+GLOBAL(void)
+jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno,
+ c_derived_tbl **pdtbl)
+{
+ JHUFF_TBL *htbl;
+ c_derived_tbl *dtbl;
+ int p, i, l, lastp, si, maxsymbol;
+ char huffsize[257];
+ unsigned int huffcode[257];
+ unsigned int code;
+
+ /* Note that huffsize[] and huffcode[] are filled in code-length order,
+ * paralleling the order of the symbols themselves in htbl->huffval[].
+ */
+
+ /* Find the input Huffman table */
+ if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
+ ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+ htbl =
+ isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
+ if (htbl == NULL)
+ ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+
+ /* Allocate a workspace if we haven't already done so. */
+ if (*pdtbl == NULL)
+ *pdtbl = (c_derived_tbl *)
+ (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+ sizeof(c_derived_tbl));
+ dtbl = *pdtbl;
+
+ /* Figure C.1: make table of Huffman code length for each symbol */
+
+ p = 0;
+ for (l = 1; l <= 16; l++) {
+ i = (int) htbl->bits[l];
+ if (i < 0 || p + i > 256) /* protect against table overrun */
+ ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+ while (i--)
+ huffsize[p++] = (char) l;
+ }
+ huffsize[p] = 0;
+ lastp = p;
+
+ /* Figure C.2: generate the codes themselves */
+ /* We also validate that the counts represent a legal Huffman code tree. */
+
+ code = 0;
+ si = huffsize[0];
+ p = 0;
+ while (huffsize[p]) {
+ while (((int) huffsize[p]) == si) {
+ huffcode[p++] = code;
+ code++;
+ }
+ /* code is now 1 more than the last code used for codelength si; but
+ * it must still fit in si bits, since no code is allowed to be all ones.
+ */
+ if (((JLONG) code) >= (((JLONG) 1) << si))
+ ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+ code <<= 1;
+ si++;
+ }
+
+ /* Figure C.3: generate encoding tables */
+ /* These are code and size indexed by symbol value */
+
+ /* Set all codeless symbols to have code length 0;
+ * this lets us detect duplicate VAL entries here, and later
+ * allows emit_bits to detect any attempt to emit such symbols.
+ */
+ MEMZERO(dtbl->ehufsi, sizeof(dtbl->ehufsi));
+
+ /* This is also a convenient place to check for out-of-range
+ * and duplicated VAL entries. We allow 0..255 for AC symbols
+ * but only 0..15 for DC. (We could constrain them further
+ * based on data depth and mode, but this seems enough.)
+ */
+ maxsymbol = isDC ? 15 : 255;
+
+ for (p = 0; p < lastp; p++) {
+ i = htbl->huffval[p];
+ if (i < 0 || i > maxsymbol || dtbl->ehufsi[i])
+ ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+ dtbl->ehufco[i] = huffcode[p];
+ dtbl->ehufsi[i] = huffsize[p];
+ }
+}
+
+
+/* Outputting bytes to the file */
+
+/* Emit a byte, taking 'action' if must suspend. */
+#define emit_byte(state,val,action) \
+ { *(state)->next_output_byte++ = (JOCTET) (val); \
+ if (--(state)->free_in_buffer == 0) \
+ if (! dump_buffer(state)) \
+ { action; } }
+
+
+LOCAL(boolean)
+dump_buffer (working_state *state)
+/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */
+{
+ struct jpeg_destination_mgr *dest = state->cinfo->dest;
+
+ if (! (*dest->empty_output_buffer) (state->cinfo))
+ return FALSE;
+ /* After a successful buffer dump, must reset buffer pointers */
+ state->next_output_byte = dest->next_output_byte;
+ state->free_in_buffer = dest->free_in_buffer;
+ return TRUE;
+}
+
+
+/* Outputting bits to the file */
+
+/* These macros perform the same task as the emit_bits() function in the
+ * original libjpeg code. In addition to reducing overhead by explicitly
+ * inlining the code, additional performance is achieved by taking into
+ * account the size of the bit buffer and waiting until it is almost full
+ * before emptying it. This mostly benefits 64-bit platforms, since 6
+ * bytes can be stored in a 64-bit bit buffer before it has to be emptied.
+ */
+
+#define EMIT_BYTE() { \
+ JOCTET c; \
+ put_bits -= 8; \
+ c = (JOCTET)GETJOCTET(put_buffer >> put_bits); \
+ *buffer++ = c; \
+ if (c == 0xFF) /* need to stuff a zero byte? */ \
+ *buffer++ = 0; \
+ }
+
+#define PUT_BITS(code, size) { \
+ put_bits += size; \
+ put_buffer = (put_buffer << size) | code; \
+}
+
+#define CHECKBUF15() { \
+ if (put_bits > 15) { \
+ EMIT_BYTE() \
+ EMIT_BYTE() \
+ } \
+}
+
+#define CHECKBUF31() { \
+ if (put_bits > 31) { \
+ EMIT_BYTE() \
+ EMIT_BYTE() \
+ EMIT_BYTE() \
+ EMIT_BYTE() \
+ } \
+}
+
+#define CHECKBUF47() { \
+ if (put_bits > 47) { \
+ EMIT_BYTE() \
+ EMIT_BYTE() \
+ EMIT_BYTE() \
+ EMIT_BYTE() \
+ EMIT_BYTE() \
+ EMIT_BYTE() \
+ } \
+}
+
+#if !defined(_WIN32) && !defined(SIZEOF_SIZE_T)
+#error Cannot determine word size
+#endif
+
+#if SIZEOF_SIZE_T==8 || defined(_WIN64)
+
+#define EMIT_BITS(code, size) { \
+ CHECKBUF47() \
+ PUT_BITS(code, size) \
+}
+
+#define EMIT_CODE(code, size) { \
+ temp2 &= (((JLONG) 1)<<nbits) - 1; \
+ CHECKBUF31() \
+ PUT_BITS(code, size) \
+ PUT_BITS(temp2, nbits) \
+ }
+
+#else
+
+#define EMIT_BITS(code, size) { \
+ PUT_BITS(code, size) \
+ CHECKBUF15() \
+}
+
+#define EMIT_CODE(code, size) { \
+ temp2 &= (((JLONG) 1)<<nbits) - 1; \
+ PUT_BITS(code, size) \
+ CHECKBUF15() \
+ PUT_BITS(temp2, nbits) \
+ CHECKBUF15() \
+ }
+
+#endif
+
+
+/* Although it is exceedingly rare, it is possible for a Huffman-encoded
+ * coefficient block to be larger than the 128-byte unencoded block. For each
+ * of the 64 coefficients, PUT_BITS is invoked twice, and each invocation can
+ * theoretically store 16 bits (for a maximum of 2048 bits or 256 bytes per
+ * encoded block.) If, for instance, one artificially sets the AC
+ * coefficients to alternating values of 32767 and -32768 (using the JPEG
+ * scanning order-- 1, 8, 16, etc.), then this will produce an encoded block
+ * larger than 200 bytes.
+ */
+#define BUFSIZE (DCTSIZE2 * 4)
+
+#define LOAD_BUFFER() { \
+ if (state->free_in_buffer < BUFSIZE) { \
+ localbuf = 1; \
+ buffer = _buffer; \
+ } \
+ else buffer = state->next_output_byte; \
+ }
+
+#define STORE_BUFFER() { \
+ if (localbuf) { \
+ bytes = buffer - _buffer; \
+ buffer = _buffer; \
+ while (bytes > 0) { \
+ bytestocopy = min(bytes, state->free_in_buffer); \
+ MEMCOPY(state->next_output_byte, buffer, bytestocopy); \
+ state->next_output_byte += bytestocopy; \
+ buffer += bytestocopy; \
+ state->free_in_buffer -= bytestocopy; \
+ if (state->free_in_buffer == 0) \
+ if (! dump_buffer(state)) return FALSE; \
+ bytes -= bytestocopy; \
+ } \
+ } \
+ else { \
+ state->free_in_buffer -= (buffer - state->next_output_byte); \
+ state->next_output_byte = buffer; \
+ } \
+ }
+
+
+LOCAL(boolean)
+flush_bits (working_state *state)
+{
+ JOCTET _buffer[BUFSIZE], *buffer;
+ size_t put_buffer; int put_bits;
+ size_t bytes, bytestocopy; int localbuf = 0;
+
+ put_buffer = state->cur.put_buffer;
+ put_bits = state->cur.put_bits;
+ LOAD_BUFFER()
+
+ /* fill any partial byte with ones */
+ PUT_BITS(0x7F, 7)
+ while (put_bits >= 8) EMIT_BYTE()
+
+ state->cur.put_buffer = 0; /* and reset bit-buffer to empty */
+ state->cur.put_bits = 0;
+ STORE_BUFFER()
+
+ return TRUE;
+}
+
+
+/* Encode a single block's worth of coefficients */
+
+LOCAL(boolean)
+encode_one_block_simd (working_state *state, JCOEFPTR block, int last_dc_val,
+ c_derived_tbl *dctbl, c_derived_tbl *actbl)
+{
+ JOCTET _buffer[BUFSIZE], *buffer;
+ size_t bytes, bytestocopy; int localbuf = 0;
+
+ LOAD_BUFFER()
+
+ buffer = jsimd_huff_encode_one_block(state, buffer, block, last_dc_val,
+ dctbl, actbl);
+
+ STORE_BUFFER()
+
+ return TRUE;
+}
+
+LOCAL(boolean)
+encode_one_block (working_state *state, JCOEFPTR block, int last_dc_val,
+ c_derived_tbl *dctbl, c_derived_tbl *actbl)
+{
+ int temp, temp2, temp3;
+ int nbits;
+ int r, code, size;
+ JOCTET _buffer[BUFSIZE], *buffer;
+ size_t put_buffer; int put_bits;
+ int code_0xf0 = actbl->ehufco[0xf0], size_0xf0 = actbl->ehufsi[0xf0];
+ size_t bytes, bytestocopy; int localbuf = 0;
+
+ put_buffer = state->cur.put_buffer;
+ put_bits = state->cur.put_bits;
+ LOAD_BUFFER()
+
+ /* Encode the DC coefficient difference per section F.1.2.1 */
+
+ temp = temp2 = block[0] - last_dc_val;
+
+ /* This is a well-known technique for obtaining the absolute value without a
+ * branch. It is derived from an assembly language technique presented in
+ * "How to Optimize for the Pentium Processors", Copyright (c) 1996, 1997 by
+ * Agner Fog.
+ */
+ temp3 = temp >> (CHAR_BIT * sizeof(int) - 1);
+ temp ^= temp3;
+ temp -= temp3;
+
+ /* For a negative input, want temp2 = bitwise complement of abs(input) */
+ /* This code assumes we are on a two's complement machine */
+ temp2 += temp3;
+
+ /* Find the number of bits needed for the magnitude of the coefficient */
+ nbits = JPEG_NBITS(temp);
+
+ /* Emit the Huffman-coded symbol for the number of bits */
+ code = dctbl->ehufco[nbits];
+ size = dctbl->ehufsi[nbits];
+ EMIT_BITS(code, size)
+
+ /* Mask off any extra bits in code */
+ temp2 &= (((JLONG) 1)<<nbits) - 1;
+
+ /* Emit that number of bits of the value, if positive, */
+ /* or the complement of its magnitude, if negative. */
+ EMIT_BITS(temp2, nbits)
+
+ /* Encode the AC coefficients per section F.1.2.2 */
+
+ r = 0; /* r = run length of zeros */
+
+/* Manually unroll the k loop to eliminate the counter variable. This
+ * improves performance greatly on systems with a limited number of
+ * registers (such as x86.)
+ */
+#define kloop(jpeg_natural_order_of_k) { \
+ if ((temp = block[jpeg_natural_order_of_k]) == 0) { \
+ r++; \
+ } else { \
+ temp2 = temp; \
+ /* Branch-less absolute value, bitwise complement, etc., same as above */ \
+ temp3 = temp >> (CHAR_BIT * sizeof(int) - 1); \
+ temp ^= temp3; \
+ temp -= temp3; \
+ temp2 += temp3; \
+ nbits = JPEG_NBITS_NONZERO(temp); \
+ /* if run length > 15, must emit special run-length-16 codes (0xF0) */ \
+ while (r > 15) { \
+ EMIT_BITS(code_0xf0, size_0xf0) \
+ r -= 16; \
+ } \
+ /* Emit Huffman symbol for run length / number of bits */ \
+ temp3 = (r << 4) + nbits; \
+ code = actbl->ehufco[temp3]; \
+ size = actbl->ehufsi[temp3]; \
+ EMIT_CODE(code, size) \
+ r = 0; \
+ } \
+}
+
+ /* One iteration for each value in jpeg_natural_order[] */
+ kloop(1); kloop(8); kloop(16); kloop(9); kloop(2); kloop(3);
+ kloop(10); kloop(17); kloop(24); kloop(32); kloop(25); kloop(18);
+ kloop(11); kloop(4); kloop(5); kloop(12); kloop(19); kloop(26);
+ kloop(33); kloop(40); kloop(48); kloop(41); kloop(34); kloop(27);
+ kloop(20); kloop(13); kloop(6); kloop(7); kloop(14); kloop(21);
+ kloop(28); kloop(35); kloop(42); kloop(49); kloop(56); kloop(57);
+ kloop(50); kloop(43); kloop(36); kloop(29); kloop(22); kloop(15);
+ kloop(23); kloop(30); kloop(37); kloop(44); kloop(51); kloop(58);
+ kloop(59); kloop(52); kloop(45); kloop(38); kloop(31); kloop(39);
+ kloop(46); kloop(53); kloop(60); kloop(61); kloop(54); kloop(47);
+ kloop(55); kloop(62); kloop(63);
+
+ /* If the last coef(s) were zero, emit an end-of-block code */
+ if (r > 0) {
+ code = actbl->ehufco[0];
+ size = actbl->ehufsi[0];
+ EMIT_BITS(code, size)
+ }
+
+ state->cur.put_buffer = put_buffer;
+ state->cur.put_bits = put_bits;
+ STORE_BUFFER()
+
+ return TRUE;
+}
+
+
+/*
+ * Emit a restart marker & resynchronize predictions.
+ */
+
+LOCAL(boolean)
+emit_restart (working_state *state, int restart_num)
+{
+ int ci;
+
+ if (! flush_bits(state))
+ return FALSE;
+
+ emit_byte(state, 0xFF, return FALSE);
+ emit_byte(state, JPEG_RST0 + restart_num, return FALSE);
+
+ /* Re-initialize DC predictions to 0 */
+ for (ci = 0; ci < state->cinfo->comps_in_scan; ci++)
+ state->cur.last_dc_val[ci] = 0;
+
+ /* The restart counter is not updated until we successfully write the MCU. */
+
+ return TRUE;
+}
+
+
+/*
+ * Encode and output one MCU's worth of Huffman-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+ huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+ working_state state;
+ int blkn, ci;
+ jpeg_component_info *compptr;
+
+ /* Load up working state */
+ state.next_output_byte = cinfo->dest->next_output_byte;
+ state.free_in_buffer = cinfo->dest->free_in_buffer;
+ ASSIGN_STATE(state.cur, entropy->saved);
+ state.cinfo = cinfo;
+
+ /* Emit restart marker if needed */
+ if (cinfo->restart_interval) {
+ if (entropy->restarts_to_go == 0)
+ if (! emit_restart(&state, entropy->next_restart_num))
+ return FALSE;
+ }
+
+ /* Encode the MCU data blocks */
+ if (entropy->simd) {
+ for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+ ci = cinfo->MCU_membership[blkn];
+ compptr = cinfo->cur_comp_info[ci];
+ if (! encode_one_block_simd(&state,
+ MCU_data[blkn][0], state.cur.last_dc_val[ci],
+ entropy->dc_derived_tbls[compptr->dc_tbl_no],
+ entropy->ac_derived_tbls[compptr->ac_tbl_no]))
+ return FALSE;
+ /* Update last_dc_val */
+ state.cur.last_dc_val[ci] = MCU_data[blkn][0][0];
+ }
+ } else {
+ for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+ ci = cinfo->MCU_membership[blkn];
+ compptr = cinfo->cur_comp_info[ci];
+ if (! encode_one_block(&state,
+ MCU_data[blkn][0], state.cur.last_dc_val[ci],
+ entropy->dc_derived_tbls[compptr->dc_tbl_no],
+ entropy->ac_derived_tbls[compptr->ac_tbl_no]))
+ return FALSE;
+ /* Update last_dc_val */
+ state.cur.last_dc_val[ci] = MCU_data[blkn][0][0];
+ }
+ }
+
+ /* Completed MCU, so update state */
+ cinfo->dest->next_output_byte = state.next_output_byte;
+ cinfo->dest->free_in_buffer = state.free_in_buffer;
+ ASSIGN_STATE(entropy->saved, state.cur);
+
+ /* Update restart-interval state too */
+ if (cinfo->restart_interval) {
+ if (entropy->restarts_to_go == 0) {
+ entropy->restarts_to_go = cinfo->restart_interval;
+ entropy->next_restart_num++;
+ entropy->next_restart_num &= 7;
+ }
+ entropy->restarts_to_go--;
+ }
+
+ return TRUE;
+}
+
+
+/*
+ * Finish up at the end of a Huffman-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass_huff (j_compress_ptr cinfo)
+{
+ huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+ working_state state;
+
+ /* Load up working state ... flush_bits needs it */
+ state.next_output_byte = cinfo->dest->next_output_byte;
+ state.free_in_buffer = cinfo->dest->free_in_buffer;
+ ASSIGN_STATE(state.cur, entropy->saved);
+ state.cinfo = cinfo;
+
+ /* Flush out the last data */
+ if (! flush_bits(&state))
+ ERREXIT(cinfo, JERR_CANT_SUSPEND);
+
+ /* Update state */
+ cinfo->dest->next_output_byte = state.next_output_byte;
+ cinfo->dest->free_in_buffer = state.free_in_buffer;
+ ASSIGN_STATE(entropy->saved, state.cur);
+}
+
+
+/*
+ * Huffman coding optimization.
+ *
+ * We first scan the supplied data and count the number of uses of each symbol
+ * that is to be Huffman-coded. (This process MUST agree with the code above.)
+ * Then we build a Huffman coding tree for the observed counts.
+ * Symbols which are not needed at all for the particular image are not
+ * assigned any code, which saves space in the DHT marker as well as in
+ * the compressed data.
+ */
+
+#ifdef ENTROPY_OPT_SUPPORTED
+
+
+/* Process a single block's worth of coefficients */
+
+LOCAL(void)
+htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
+ long dc_counts[], long ac_counts[])
+{
+ register int temp;
+ register int nbits;
+ register int k, r;
+
+ /* Encode the DC coefficient difference per section F.1.2.1 */
+
+ temp = block[0] - last_dc_val;
+ if (temp < 0)
+ temp = -temp;
+
+ /* Find the number of bits needed for the magnitude of the coefficient */
+ nbits = 0;
+ while (temp) {
+ nbits++;
+ temp >>= 1;
+ }
+ /* Check for out-of-range coefficient values.
+ * Since we're encoding a difference, the range limit is twice as much.
+ */
+ if (nbits > MAX_COEF_BITS+1)
+ ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+
+ /* Count the Huffman symbol for the number of bits */
+ dc_counts[nbits]++;
+
+ /* Encode the AC coefficients per section F.1.2.2 */
+
+ r = 0; /* r = run length of zeros */
+
+ for (k = 1; k < DCTSIZE2; k++) {
+ if ((temp = block[jpeg_natural_order[k]]) == 0) {
+ r++;
+ } else {
+ /* if run length > 15, must emit special run-length-16 codes (0xF0) */
+ while (r > 15) {
+ ac_counts[0xF0]++;
+ r -= 16;
+ }
+
+ /* Find the number of bits needed for the magnitude of the coefficient */
+ if (temp < 0)
+ temp = -temp;
+
+ /* Find the number of bits needed for the magnitude of the coefficient */
+ nbits = 1; /* there must be at least one 1 bit */
+ while ((temp >>= 1))
+ nbits++;
+ /* Check for out-of-range coefficient values */
+ if (nbits > MAX_COEF_BITS)
+ ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+
+ /* Count Huffman symbol for run length / number of bits */
+ ac_counts[(r << 4) + nbits]++;
+
+ r = 0;
+ }
+ }
+
+ /* If the last coef(s) were zero, emit an end-of-block code */
+ if (r > 0)
+ ac_counts[0]++;
+}
+
+
+/*
+ * Trial-encode one MCU's worth of Huffman-compressed coefficients.
+ * No data is actually output, so no suspension return is possible.
+ */
+
+METHODDEF(boolean)
+encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+ huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+ int blkn, ci;
+ jpeg_component_info *compptr;
+
+ /* Take care of restart intervals if needed */
+ if (cinfo->restart_interval) {
+ if (entropy->restarts_to_go == 0) {
+ /* Re-initialize DC predictions to 0 */
+ for (ci = 0; ci < cinfo->comps_in_scan; ci++)
+ entropy->saved.last_dc_val[ci] = 0;
+ /* Update restart state */
+ entropy->restarts_to_go = cinfo->restart_interval;
+ }
+ entropy->restarts_to_go--;
+ }
+
+ for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+ ci = cinfo->MCU_membership[blkn];
+ compptr = cinfo->cur_comp_info[ci];
+ htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci],
+ entropy->dc_count_ptrs[compptr->dc_tbl_no],
+ entropy->ac_count_ptrs[compptr->ac_tbl_no]);
+ entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0];
+ }
+
+ return TRUE;
+}
+
+
+/*
+ * Generate the best Huffman code table for the given counts, fill htbl.
+ * Note this is also used by jcphuff.c.
+ *
+ * The JPEG standard requires that no symbol be assigned a codeword of all
+ * one bits (so that padding bits added at the end of a compressed segment
+ * can't look like a valid code). Because of the canonical ordering of
+ * codewords, this just means that there must be an unused slot in the
+ * longest codeword length category. Section K.2 of the JPEG spec suggests
+ * reserving such a slot by pretending that symbol 256 is a valid symbol
+ * with count 1. In theory that's not optimal; giving it count zero but
+ * including it in the symbol set anyway should give a better Huffman code.
+ * But the theoretically better code actually seems to come out worse in
+ * practice, because it produces more all-ones bytes (which incur stuffed
+ * zero bytes in the final file). In any case the difference is tiny.
+ *
+ * The JPEG standard requires Huffman codes to be no more than 16 bits long.
+ * If some symbols have a very small but nonzero probability, the Huffman tree
+ * must be adjusted to meet the code length restriction. We currently use
+ * the adjustment method suggested in JPEG section K.2. This method is *not*
+ * optimal; it may not choose the best possible limited-length code. But
+ * typically only very-low-frequency symbols will be given less-than-optimal
+ * lengths, so the code is almost optimal. Experimental comparisons against
+ * an optimal limited-length-code algorithm indicate that the difference is
+ * microscopic --- usually less than a hundredth of a percent of total size.
+ * So the extra complexity of an optimal algorithm doesn't seem worthwhile.
+ */
+
+GLOBAL(void)
+jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL *htbl, long freq[])
+{
+#define MAX_CLEN 32 /* assumed maximum initial code length */
+ UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */
+ int codesize[257]; /* codesize[k] = code length of symbol k */
+ int others[257]; /* next symbol in current branch of tree */
+ int c1, c2;
+ int p, i, j;
+ long v;
+
+ /* This algorithm is explained in section K.2 of the JPEG standard */
+
+ MEMZERO(bits, sizeof(bits));
+ MEMZERO(codesize, sizeof(codesize));
+ for (i = 0; i < 257; i++)
+ others[i] = -1; /* init links to empty */
+
+ freq[256] = 1; /* make sure 256 has a nonzero count */
+ /* Including the pseudo-symbol 256 in the Huffman procedure guarantees
+ * that no real symbol is given code-value of all ones, because 256
+ * will be placed last in the largest codeword category.
+ */
+
+ /* Huffman's basic algorithm to assign optimal code lengths to symbols */
+
+ for (;;) {
+ /* Find the smallest nonzero frequency, set c1 = its symbol */
+ /* In case of ties, take the larger symbol number */
+ c1 = -1;
+ v = 1000000000L;
+ for (i = 0; i <= 256; i++) {
+ if (freq[i] && freq[i] <= v) {
+ v = freq[i];
+ c1 = i;
+ }
+ }
+
+ /* Find the next smallest nonzero frequency, set c2 = its symbol */
+ /* In case of ties, take the larger symbol number */
+ c2 = -1;
+ v = 1000000000L;
+ for (i = 0; i <= 256; i++) {
+ if (freq[i] && freq[i] <= v && i != c1) {
+ v = freq[i];
+ c2 = i;
+ }
+ }
+
+ /* Done if we've merged everything into one frequency */
+ if (c2 < 0)
+ break;
+
+ /* Else merge the two counts/trees */
+ freq[c1] += freq[c2];
+ freq[c2] = 0;
+
+ /* Increment the codesize of everything in c1's tree branch */
+ codesize[c1]++;
+ while (others[c1] >= 0) {
+ c1 = others[c1];
+ codesize[c1]++;
+ }
+
+ others[c1] = c2; /* chain c2 onto c1's tree branch */
+
+ /* Increment the codesize of everything in c2's tree branch */
+ codesize[c2]++;
+ while (others[c2] >= 0) {
+ c2 = others[c2];
+ codesize[c2]++;
+ }
+ }
+
+ /* Now count the number of symbols of each code length */
+ for (i = 0; i <= 256; i++) {
+ if (codesize[i]) {
+ /* The JPEG standard seems to think that this can't happen, */
+ /* but I'm paranoid... */
+ if (codesize[i] > MAX_CLEN)
+ ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW);
+
+ bits[codesize[i]]++;
+ }
+ }
+
+ /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure
+ * Huffman procedure assigned any such lengths, we must adjust the coding.
+ * Here is what the JPEG spec says about how this next bit works:
+ * Since symbols are paired for the longest Huffman code, the symbols are
+ * removed from this length category two at a time. The prefix for the pair
+ * (which is one bit shorter) is allocated to one of the pair; then,
+ * skipping the BITS entry for that prefix length, a code word from the next
+ * shortest nonzero BITS entry is converted into a prefix for two code words
+ * one bit longer.
+ */
+
+ for (i = MAX_CLEN; i > 16; i--) {
+ while (bits[i] > 0) {
+ j = i - 2; /* find length of new prefix to be used */
+ while (bits[j] == 0)
+ j--;
+
+ bits[i] -= 2; /* remove two symbols */
+ bits[i-1]++; /* one goes in this length */
+ bits[j+1] += 2; /* two new symbols in this length */
+ bits[j]--; /* symbol of this length is now a prefix */
+ }
+ }
+
+ /* Remove the count for the pseudo-symbol 256 from the largest codelength */
+ while (bits[i] == 0) /* find largest codelength still in use */
+ i--;
+ bits[i]--;
+
+ /* Return final symbol counts (only for lengths 0..16) */
+ MEMCOPY(htbl->bits, bits, sizeof(htbl->bits));
+
+ /* Return a list of the symbols sorted by code length */
+ /* It's not real clear to me why we don't need to consider the codelength
+ * changes made above, but the JPEG spec seems to think this works.
+ */
+ p = 0;
+ for (i = 1; i <= MAX_CLEN; i++) {
+ for (j = 0; j <= 255; j++) {
+ if (codesize[j] == i) {
+ htbl->huffval[p] = (UINT8) j;
+ p++;
+ }
+ }
+ }
+
+ /* Set sent_table FALSE so updated table will be written to JPEG file. */
+ htbl->sent_table = FALSE;
+}
+
+
+/*
+ * Finish up a statistics-gathering pass and create the new Huffman tables.
+ */
+
+METHODDEF(void)
+finish_pass_gather (j_compress_ptr cinfo)
+{
+ huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+ int ci, dctbl, actbl;
+ jpeg_component_info *compptr;
+ JHUFF_TBL **htblptr;
+ boolean did_dc[NUM_HUFF_TBLS];
+ boolean did_ac[NUM_HUFF_TBLS];
+
+ /* It's important not to apply jpeg_gen_optimal_table more than once
+ * per table, because it clobbers the input frequency counts!
+ */
+ MEMZERO(did_dc, sizeof(did_dc));
+ MEMZERO(did_ac, sizeof(did_ac));
+
+ for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+ compptr = cinfo->cur_comp_info[ci];
+ dctbl = compptr->dc_tbl_no;
+ actbl = compptr->ac_tbl_no;
+ if (! did_dc[dctbl]) {
+ htblptr = & cinfo->dc_huff_tbl_ptrs[dctbl];
+ if (*htblptr == NULL)
+ *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+ jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[dctbl]);
+ did_dc[dctbl] = TRUE;
+ }
+ if (! did_ac[actbl]) {
+ htblptr = & cinfo->ac_huff_tbl_ptrs[actbl];
+ if (*htblptr == NULL)
+ *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+ jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[actbl]);
+ did_ac[actbl] = TRUE;
+ }
+ }
+}
+
+
+#endif /* ENTROPY_OPT_SUPPORTED */
+
+
+/*
+ * Module initialization routine for Huffman entropy encoding.
+ */
+
+GLOBAL(void)
+jinit_huff_encoder (j_compress_ptr cinfo)
+{
+ huff_entropy_ptr entropy;
+ int i;
+
+ entropy = (huff_entropy_ptr)
+ (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+ sizeof(huff_entropy_encoder));
+ cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+ entropy->pub.start_pass = start_pass_huff;
+
+ /* Mark tables unallocated */
+ for (i = 0; i < NUM_HUFF_TBLS; i++) {
+ entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
+#ifdef ENTROPY_OPT_SUPPORTED
+ entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL;
+#endif
+ }
+}