summaryrefslogtreecommitdiffstats
path: root/dom/system/gonk/android_audio/EffectApi.h
diff options
context:
space:
mode:
Diffstat (limited to 'dom/system/gonk/android_audio/EffectApi.h')
-rw-r--r--dom/system/gonk/android_audio/EffectApi.h798
1 files changed, 0 insertions, 798 deletions
diff --git a/dom/system/gonk/android_audio/EffectApi.h b/dom/system/gonk/android_audio/EffectApi.h
deleted file mode 100644
index 729545d0c..000000000
--- a/dom/system/gonk/android_audio/EffectApi.h
+++ /dev/null
@@ -1,798 +0,0 @@
-/*
- * Copyright (C) 2010 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_EFFECTAPI_H_
-#define ANDROID_EFFECTAPI_H_
-
-#include <errno.h>
-#include <stdint.h>
-#include <sys/types.h>
-
-#if __cplusplus
-extern "C" {
-#endif
-
-/////////////////////////////////////////////////
-// Effect control interface
-/////////////////////////////////////////////////
-
-// The effect control interface is exposed by each effect engine implementation. It consists of
-// a set of functions controlling the configuration, activation and process of the engine.
-// The functions are grouped in a structure of type effect_interface_s:
-// struct effect_interface_s {
-// effect_process_t process;
-// effect_command_t command;
-// };
-
-
-// effect_interface_t: Effect control interface handle.
-// The effect_interface_t serves two purposes regarding the implementation of the effect engine:
-// - 1 it is the address of a pointer to an effect_interface_s structure where the functions
-// of the effect control API for a particular effect are located.
-// - 2 it is the address of the context of a particular effect instance.
-// A typical implementation in the effect library would define a structure as follows:
-// struct effect_module_s {
-// const struct effect_interface_s *itfe;
-// effect_config_t config;
-// effect_context_t context;
-// }
-// The implementation of EffectCreate() function would then allocate a structure of this
-// type and return its address as effect_interface_t
-typedef struct effect_interface_s **effect_interface_t;
-
-
-// Effect API version 1.0
-#define EFFECT_API_VERSION 0x0100 // Format 0xMMmm MM: Major version, mm: minor version
-
-// Maximum length of character strings in structures defines by this API.
-#define EFFECT_STRING_LEN_MAX 64
-
-//
-//--- Effect descriptor structure effect_descriptor_t
-//
-
-// Unique effect ID (can be generated from the following site:
-// http://www.itu.int/ITU-T/asn1/uuid.html)
-// This format is used for both "type" and "uuid" fields of the effect descriptor structure.
-// - When used for effect type and the engine is implementing and effect corresponding to a standard
-// OpenSL ES interface, this ID must be the one defined in OpenSLES_IID.h for that interface.
-// - When used as uuid, it should be a unique UUID for this particular implementation.
-typedef struct effect_uuid_s {
- uint32_t timeLow;
- uint16_t timeMid;
- uint16_t timeHiAndVersion;
- uint16_t clockSeq;
- uint8_t node[6];
-} effect_uuid_t;
-
-// NULL UUID definition (matches SL_IID_NULL_)
-#define EFFECT_UUID_INITIALIZER { 0xec7178ec, 0xe5e1, 0x4432, 0xa3f4, \
- { 0x46, 0x57, 0xe6, 0x79, 0x52, 0x10 } }
-static const effect_uuid_t EFFECT_UUID_NULL_ = EFFECT_UUID_INITIALIZER;
-const effect_uuid_t * const EFFECT_UUID_NULL = &EFFECT_UUID_NULL_;
-const char * const EFFECT_UUID_NULL_STR = "ec7178ec-e5e1-4432-a3f4-4657e6795210";
-
-// The effect descriptor contains necessary information to facilitate the enumeration of the effect
-// engines present in a library.
-typedef struct effect_descriptor_s {
- effect_uuid_t type; // UUID of to the OpenSL ES interface implemented by this effect
- effect_uuid_t uuid; // UUID for this particular implementation
- uint16_t apiVersion; // Version of the effect API implemented: matches EFFECT_API_VERSION
- uint32_t flags; // effect engine capabilities/requirements flags (see below)
- uint16_t cpuLoad; // CPU load indication (see below)
- uint16_t memoryUsage; // Data Memory usage (see below)
- char name[EFFECT_STRING_LEN_MAX]; // human readable effect name
- char implementor[EFFECT_STRING_LEN_MAX]; // human readable effect implementor name
-} effect_descriptor_t;
-
-// CPU load and memory usage indication: each effect implementation must provide an indication of
-// its CPU and memory usage for the audio effect framework to limit the number of effects
-// instantiated at a given time on a given platform.
-// The CPU load is expressed in 0.1 MIPS units as estimated on an ARM9E core (ARMv5TE) with 0 WS.
-// The memory usage is expressed in KB and includes only dynamically allocated memory
-
-// Definitions for flags field of effect descriptor.
-// +---------------------------+-----------+-----------------------------------
-// | description | bits | values
-// +---------------------------+-----------+-----------------------------------
-// | connection mode | 0..1 | 0 insert: after track process
-// | | | 1 auxiliary: connect to track auxiliary
-// | | | output and use send level
-// | | | 2 replace: replaces track process function;
-// | | | must implement SRC, volume and mono to stereo.
-// | | | 3 reserved
-// +---------------------------+-----------+-----------------------------------
-// | insertion preference | 2..4 | 0 none
-// | | | 1 first of the chain
-// | | | 2 last of the chain
-// | | | 3 exclusive (only effect in the insert chain)
-// | | | 4..7 reserved
-// +---------------------------+-----------+-----------------------------------
-// | Volume management | 5..6 | 0 none
-// | | | 1 implements volume control
-// | | | 2 requires volume indication
-// | | | 3 reserved
-// +---------------------------+-----------+-----------------------------------
-// | Device indication | 7..8 | 0 none
-// | | | 1 requires device updates
-// | | | 2..3 reserved
-// +---------------------------+-----------+-----------------------------------
-// | Sample input mode | 9..10 | 0 direct: process() function or EFFECT_CMD_CONFIGURE
-// | | | command must specify a buffer descriptor
-// | | | 1 provider: process() function uses the
-// | | | bufferProvider indicated by the
-// | | | EFFECT_CMD_CONFIGURE command to request input.
-// | | | buffers.
-// | | | 2 both: both input modes are supported
-// | | | 3 reserved
-// +---------------------------+-----------+-----------------------------------
-// | Sample output mode | 11..12 | 0 direct: process() function or EFFECT_CMD_CONFIGURE
-// | | | command must specify a buffer descriptor
-// | | | 1 provider: process() function uses the
-// | | | bufferProvider indicated by the
-// | | | EFFECT_CMD_CONFIGURE command to request output
-// | | | buffers.
-// | | | 2 both: both output modes are supported
-// | | | 3 reserved
-// +---------------------------+-----------+-----------------------------------
-// | Hardware acceleration | 13..15 | 0 No hardware acceleration
-// | | | 1 non tunneled hw acceleration: the process() function
-// | | | reads the samples, send them to HW accelerated
-// | | | effect processor, reads back the processed samples
-// | | | and returns them to the output buffer.
-// | | | 2 tunneled hw acceleration: the process() function is
-// | | | transparent. The effect interface is only used to
-// | | | control the effect engine. This mode is relevant for
-// | | | global effects actually applied by the audio
-// | | | hardware on the output stream.
-// +---------------------------+-----------+-----------------------------------
-// | Audio Mode indication | 16..17 | 0 none
-// | | | 1 requires audio mode updates
-// | | | 2..3 reserved
-// +---------------------------+-----------+-----------------------------------
-
-// Insert mode
-#define EFFECT_FLAG_TYPE_MASK 0x00000003
-#define EFFECT_FLAG_TYPE_INSERT 0x00000000
-#define EFFECT_FLAG_TYPE_AUXILIARY 0x00000001
-#define EFFECT_FLAG_TYPE_REPLACE 0x00000002
-
-// Insert preference
-#define EFFECT_FLAG_INSERT_MASK 0x0000001C
-#define EFFECT_FLAG_INSERT_ANY 0x00000000
-#define EFFECT_FLAG_INSERT_FIRST 0x00000004
-#define EFFECT_FLAG_INSERT_LAST 0x00000008
-#define EFFECT_FLAG_INSERT_EXCLUSIVE 0x0000000C
-
-
-// Volume control
-#define EFFECT_FLAG_VOLUME_MASK 0x00000060
-#define EFFECT_FLAG_VOLUME_CTRL 0x00000020
-#define EFFECT_FLAG_VOLUME_IND 0x00000040
-#define EFFECT_FLAG_VOLUME_NONE 0x00000000
-
-// Device indication
-#define EFFECT_FLAG_DEVICE_MASK 0x00000180
-#define EFFECT_FLAG_DEVICE_IND 0x00000080
-#define EFFECT_FLAG_DEVICE_NONE 0x00000000
-
-// Sample input modes
-#define EFFECT_FLAG_INPUT_MASK 0x00000600
-#define EFFECT_FLAG_INPUT_DIRECT 0x00000000
-#define EFFECT_FLAG_INPUT_PROVIDER 0x00000200
-#define EFFECT_FLAG_INPUT_BOTH 0x00000400
-
-// Sample output modes
-#define EFFECT_FLAG_OUTPUT_MASK 0x00001800
-#define EFFECT_FLAG_OUTPUT_DIRECT 0x00000000
-#define EFFECT_FLAG_OUTPUT_PROVIDER 0x00000800
-#define EFFECT_FLAG_OUTPUT_BOTH 0x00001000
-
-// Hardware acceleration mode
-#define EFFECT_FLAG_HW_ACC_MASK 0x00006000
-#define EFFECT_FLAG_HW_ACC_SIMPLE 0x00002000
-#define EFFECT_FLAG_HW_ACC_TUNNEL 0x00004000
-
-// Audio mode indication
-#define EFFECT_FLAG_AUDIO_MODE_MASK 0x00018000
-#define EFFECT_FLAG_AUDIO_MODE_IND 0x00008000
-#define EFFECT_FLAG_AUDIO_MODE_NONE 0x00000000
-
-// Forward definition of type audio_buffer_t
-typedef struct audio_buffer_s audio_buffer_t;
-
-////////////////////////////////////////////////////////////////////////////////
-//
-// Function: process
-//
-// Description: Effect process function. Takes input samples as specified
-// (count and location) in input buffer descriptor and output processed
-// samples as specified in output buffer descriptor. If the buffer descriptor
-// is not specified the function must use either the buffer or the
-// buffer provider function installed by the EFFECT_CMD_CONFIGURE command.
-// The effect framework will call the process() function after the EFFECT_CMD_ENABLE
-// command is received and until the EFFECT_CMD_DISABLE is received. When the engine
-// receives the EFFECT_CMD_DISABLE command it should turn off the effect gracefully
-// and when done indicate that it is OK to stop calling the process() function by
-// returning the -ENODATA status.
-//
-// NOTE: the process() function implementation should be "real-time safe" that is
-// it should not perform blocking calls: malloc/free, sleep, read/write/open/close,
-// pthread_cond_wait/pthread_mutex_lock...
-//
-// Input:
-// effect_interface_t: handle to the effect interface this function
-// is called on.
-// inBuffer: buffer descriptor indicating where to read samples to process.
-// If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command.
-//
-// inBuffer: buffer descriptor indicating where to write processed samples.
-// If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command.
-//
-// Output:
-// returned value: 0 successful operation
-// -ENODATA the engine has finished the disable phase and the framework
-// can stop calling process()
-// -EINVAL invalid interface handle or
-// invalid input/output buffer description
-////////////////////////////////////////////////////////////////////////////////
-typedef int32_t (*effect_process_t)(effect_interface_t self,
- audio_buffer_t *inBuffer,
- audio_buffer_t *outBuffer);
-
-////////////////////////////////////////////////////////////////////////////////
-//
-// Function: command
-//
-// Description: Send a command and receive a response to/from effect engine.
-//
-// Input:
-// effect_interface_t: handle to the effect interface this function
-// is called on.
-// cmdCode: command code: the command can be a standardized command defined in
-// effect_command_e (see below) or a proprietary command.
-// cmdSize: size of command in bytes
-// pCmdData: pointer to command data
-// pReplyData: pointer to reply data
-//
-// Input/Output:
-// replySize: maximum size of reply data as input
-// actual size of reply data as output
-//
-// Output:
-// returned value: 0 successful operation
-// -EINVAL invalid interface handle or
-// invalid command/reply size or format according to command code
-// The return code should be restricted to indicate problems related to the this
-// API specification. Status related to the execution of a particular command should be
-// indicated as part of the reply field.
-//
-// *pReplyData updated with command response
-//
-////////////////////////////////////////////////////////////////////////////////
-typedef int32_t (*effect_command_t)(effect_interface_t self,
- uint32_t cmdCode,
- uint32_t cmdSize,
- void *pCmdData,
- uint32_t *replySize,
- void *pReplyData);
-
-
-// Effect control interface definition
-struct effect_interface_s {
- effect_process_t process;
- effect_command_t command;
-};
-
-
-//
-//--- Standardized command codes for command() function
-//
-enum effect_command_e {
- EFFECT_CMD_INIT, // initialize effect engine
- EFFECT_CMD_CONFIGURE, // configure effect engine (see effect_config_t)
- EFFECT_CMD_RESET, // reset effect engine
- EFFECT_CMD_ENABLE, // enable effect process
- EFFECT_CMD_DISABLE, // disable effect process
- EFFECT_CMD_SET_PARAM, // set parameter immediately (see effect_param_t)
- EFFECT_CMD_SET_PARAM_DEFERRED, // set parameter deferred
- EFFECT_CMD_SET_PARAM_COMMIT, // commit previous set parameter deferred
- EFFECT_CMD_GET_PARAM, // get parameter
- EFFECT_CMD_SET_DEVICE, // set audio device (see audio_device_e)
- EFFECT_CMD_SET_VOLUME, // set volume
- EFFECT_CMD_SET_AUDIO_MODE, // set the audio mode (normal, ring, ...)
- EFFECT_CMD_FIRST_PROPRIETARY = 0x10000 // first proprietary command code
-};
-
-//==================================================================================================
-// command: EFFECT_CMD_INIT
-//--------------------------------------------------------------------------------------------------
-// description:
-// Initialize effect engine: All configurations return to default
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: 0
-// data: N/A
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: sizeof(int)
-// data: status
-//==================================================================================================
-// command: EFFECT_CMD_CONFIGURE
-//--------------------------------------------------------------------------------------------------
-// description:
-// Apply new audio parameters configurations for input and output buffers
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: sizeof(effect_config_t)
-// data: effect_config_t
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: sizeof(int)
-// data: status
-//==================================================================================================
-// command: EFFECT_CMD_RESET
-//--------------------------------------------------------------------------------------------------
-// description:
-// Reset the effect engine. Keep configuration but resets state and buffer content
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: 0
-// data: N/A
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: 0
-// data: N/A
-//==================================================================================================
-// command: EFFECT_CMD_ENABLE
-//--------------------------------------------------------------------------------------------------
-// description:
-// Enable the process. Called by the framework before the first call to process()
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: 0
-// data: N/A
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: sizeof(int)
-// data: status
-//==================================================================================================
-// command: EFFECT_CMD_DISABLE
-//--------------------------------------------------------------------------------------------------
-// description:
-// Disable the process. Called by the framework after the last call to process()
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: 0
-// data: N/A
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: sizeof(int)
-// data: status
-//==================================================================================================
-// command: EFFECT_CMD_SET_PARAM
-//--------------------------------------------------------------------------------------------------
-// description:
-// Set a parameter and apply it immediately
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: sizeof(effect_param_t) + size of param and value
-// data: effect_param_t + param + value. See effect_param_t definition below for value offset
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: sizeof(int)
-// data: status
-//==================================================================================================
-// command: EFFECT_CMD_SET_PARAM_DEFERRED
-//--------------------------------------------------------------------------------------------------
-// description:
-// Set a parameter but apply it only when receiving EFFECT_CMD_SET_PARAM_COMMIT command
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: sizeof(effect_param_t) + size of param and value
-// data: effect_param_t + param + value. See effect_param_t definition below for value offset
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: 0
-// data: N/A
-//==================================================================================================
-// command: EFFECT_CMD_SET_PARAM_COMMIT
-//--------------------------------------------------------------------------------------------------
-// description:
-// Apply all previously received EFFECT_CMD_SET_PARAM_DEFERRED commands
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: 0
-// data: N/A
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: sizeof(int)
-// data: status
-//==================================================================================================
-// command: EFFECT_CMD_GET_PARAM
-//--------------------------------------------------------------------------------------------------
-// description:
-// Get a parameter value
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: sizeof(effect_param_t) + size of param
-// data: effect_param_t + param
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: sizeof(effect_param_t) + size of param and value
-// data: effect_param_t + param + value. See effect_param_t definition below for value offset
-//==================================================================================================
-// command: EFFECT_CMD_SET_DEVICE
-//--------------------------------------------------------------------------------------------------
-// description:
-// Set the rendering device the audio output path is connected to. See audio_device_e for device
-// values.
-// The effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to receive this
-// command when the device changes
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: sizeof(uint32_t)
-// data: audio_device_e
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: 0
-// data: N/A
-//==================================================================================================
-// command: EFFECT_CMD_SET_VOLUME
-//--------------------------------------------------------------------------------------------------
-// description:
-// Set and get volume. Used by audio framework to delegate volume control to effect engine.
-// The effect implementation must set EFFECT_FLAG_VOLUME_IND or EFFECT_FLAG_VOLUME_CTRL flag in
-// its descriptor to receive this command before every call to process() function
-// If EFFECT_FLAG_VOLUME_CTRL flag is set in the effect descriptor, the effect engine must return
-// the volume that should be applied before the effect is processed. The overall volume (the volume
-// actually applied by the effect engine multiplied by the returned value) should match the value
-// indicated in the command.
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: n * sizeof(uint32_t)
-// data: volume for each channel defined in effect_config_t for output buffer expressed in
-// 8.24 fixed point format
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: n * sizeof(uint32_t) / 0
-// data: - if EFFECT_FLAG_VOLUME_CTRL is set in effect descriptor:
-// volume for each channel defined in effect_config_t for output buffer expressed in
-// 8.24 fixed point format
-// - if EFFECT_FLAG_VOLUME_CTRL is not set in effect descriptor:
-// N/A
-// It is legal to receive a null pointer as pReplyData in which case the effect framework has
-// delegated volume control to another effect
-//==================================================================================================
-// command: EFFECT_CMD_SET_AUDIO_MODE
-//--------------------------------------------------------------------------------------------------
-// description:
-// Set the audio mode. The effect implementation must set EFFECT_FLAG_AUDIO_MODE_IND flag in its
-// descriptor to receive this command when the audio mode changes.
-//--------------------------------------------------------------------------------------------------
-// command format:
-// size: sizeof(uint32_t)
-// data: audio_mode_e
-//--------------------------------------------------------------------------------------------------
-// reply format:
-// size: 0
-// data: N/A
-//==================================================================================================
-// command: EFFECT_CMD_FIRST_PROPRIETARY
-//--------------------------------------------------------------------------------------------------
-// description:
-// All proprietary effect commands must use command codes above this value. The size and format of
-// command and response fields is free in this case
-//==================================================================================================
-
-
-// Audio buffer descriptor used by process(), bufferProvider() functions and buffer_config_t
-// structure. Multi-channel audio is always interleaved. The channel order is from LSB to MSB with
-// regard to the channel mask definition in audio_channels_e e.g :
-// Stereo: left, right
-// 5 point 1: front left, front right, front center, low frequency, back left, back right
-// The buffer size is expressed in frame count, a frame being composed of samples for all
-// channels at a given time. Frame size for unspecified format (AUDIO_FORMAT_OTHER) is 8 bit by
-// definition
-struct audio_buffer_s {
- size_t frameCount; // number of frames in buffer
- union {
- void* raw; // raw pointer to start of buffer
- int32_t* s32; // pointer to signed 32 bit data at start of buffer
- int16_t* s16; // pointer to signed 16 bit data at start of buffer
- uint8_t* u8; // pointer to unsigned 8 bit data at start of buffer
- };
-};
-
-// The buffer_provider_s structure contains functions that can be used
-// by the effect engine process() function to query and release input
-// or output audio buffer.
-// The getBuffer() function is called to retrieve a buffer where data
-// should read from or written to by process() function.
-// The releaseBuffer() function MUST be called when the buffer retrieved
-// with getBuffer() is not needed anymore.
-// The process function should use the buffer provider mechanism to retrieve
-// input or output buffer if the inBuffer or outBuffer passed as argument is NULL
-// and the buffer configuration (buffer_config_t) given by the EFFECT_CMD_CONFIGURE
-// command did not specify an audio buffer.
-
-typedef int32_t (* buffer_function_t)(void *cookie, audio_buffer_t *buffer);
-
-typedef struct buffer_provider_s {
- buffer_function_t getBuffer; // retrieve next buffer
- buffer_function_t releaseBuffer; // release used buffer
- void *cookie; // for use by client of buffer provider functions
-} buffer_provider_t;
-
-
-// The buffer_config_s structure specifies the input or output audio format
-// to be used by the effect engine. It is part of the effect_config_t
-// structure that defines both input and output buffer configurations and is
-// passed by the EFFECT_CMD_CONFIGURE command.
-typedef struct buffer_config_s {
- audio_buffer_t buffer; // buffer for use by process() function if not passed explicitly
- uint32_t samplingRate; // sampling rate
- uint32_t channels; // channel mask (see audio_channels_e)
- buffer_provider_t bufferProvider; // buffer provider
- uint8_t format; // Audio format (see audio_format_e)
- uint8_t accessMode; // read/write or accumulate in buffer (effect_buffer_access_e)
- uint16_t mask; // indicates which of the above fields is valid
-} buffer_config_t;
-
-// Sample format
-enum audio_format_e {
- SAMPLE_FORMAT_PCM_S15, // PCM signed 16 bits
- SAMPLE_FORMAT_PCM_U8, // PCM unsigned 8 bits
- SAMPLE_FORMAT_PCM_S7_24, // PCM signed 7.24 fixed point representation
- SAMPLE_FORMAT_OTHER // other format (e.g. compressed)
-};
-
-// Channel mask
-enum audio_channels_e {
- CHANNEL_FRONT_LEFT = 0x1, // front left channel
- CHANNEL_FRONT_RIGHT = 0x2, // front right channel
- CHANNEL_FRONT_CENTER = 0x4, // front center channel
- CHANNEL_LOW_FREQUENCY = 0x8, // low frequency channel
- CHANNEL_BACK_LEFT = 0x10, // back left channel
- CHANNEL_BACK_RIGHT = 0x20, // back right channel
- CHANNEL_FRONT_LEFT_OF_CENTER = 0x40, // front left of center channel
- CHANNEL_FRONT_RIGHT_OF_CENTER = 0x80, // front right of center channel
- CHANNEL_BACK_CENTER = 0x100, // back center channel
- CHANNEL_MONO = CHANNEL_FRONT_LEFT,
- CHANNEL_STEREO = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT),
- CHANNEL_QUAD = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT |
- CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT),
- CHANNEL_SURROUND = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT |
- CHANNEL_FRONT_CENTER | CHANNEL_BACK_CENTER),
- CHANNEL_5POINT1 = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT |
- CHANNEL_FRONT_CENTER | CHANNEL_LOW_FREQUENCY | CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT),
- CHANNEL_7POINT1 = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT |
- CHANNEL_FRONT_CENTER | CHANNEL_LOW_FREQUENCY | CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT |
- CHANNEL_FRONT_LEFT_OF_CENTER | CHANNEL_FRONT_RIGHT_OF_CENTER),
-};
-
-// Render device
-enum audio_device_e {
- DEVICE_EARPIECE = 0x1, // earpiece
- DEVICE_SPEAKER = 0x2, // speaker
- DEVICE_WIRED_HEADSET = 0x4, // wired headset, with microphone
- DEVICE_WIRED_HEADPHONE = 0x8, // wired headphone, without microphone
- DEVICE_BLUETOOTH_SCO = 0x10, // generic bluetooth SCO
- DEVICE_BLUETOOTH_SCO_HEADSET = 0x20, // bluetooth SCO headset
- DEVICE_BLUETOOTH_SCO_CARKIT = 0x40, // bluetooth SCO car kit
- DEVICE_BLUETOOTH_A2DP = 0x80, // generic bluetooth A2DP
- DEVICE_BLUETOOTH_A2DP_HEADPHONES = 0x100, // bluetooth A2DP headphones
- DEVICE_BLUETOOTH_A2DP_SPEAKER = 0x200, // bluetooth A2DP speakers
- DEVICE_AUX_DIGITAL = 0x400, // digital output
- DEVICE_EXTERNAL_SPEAKER = 0x800 // external speaker (stereo and High quality)
-};
-
-#if ANDROID_VERSION < 17
-// Audio mode
-enum audio_mode_e {
- AUDIO_MODE_NORMAL, // device idle
- AUDIO_MODE_RINGTONE, // device ringing
- AUDIO_MODE_IN_CALL // audio call connected (VoIP or telephony)
-};
-#endif
-
-// Values for "accessMode" field of buffer_config_t:
-// overwrite, read only, accumulate (read/modify/write)
-enum effect_buffer_access_e {
- EFFECT_BUFFER_ACCESS_WRITE,
- EFFECT_BUFFER_ACCESS_READ,
- EFFECT_BUFFER_ACCESS_ACCUMULATE
-
-};
-
-// Values for bit field "mask" in buffer_config_t. If a bit is set, the corresponding field
-// in buffer_config_t must be taken into account when executing the EFFECT_CMD_CONFIGURE command
-#define EFFECT_CONFIG_BUFFER 0x0001 // buffer field must be taken into account
-#define EFFECT_CONFIG_SMP_RATE 0x0002 // samplingRate field must be taken into account
-#define EFFECT_CONFIG_CHANNELS 0x0004 // channels field must be taken into account
-#define EFFECT_CONFIG_FORMAT 0x0008 // format field must be taken into account
-#define EFFECT_CONFIG_ACC_MODE 0x0010 // accessMode field must be taken into account
-#define EFFECT_CONFIG_PROVIDER 0x0020 // bufferProvider field must be taken into account
-#define EFFECT_CONFIG_ALL (EFFECT_CONFIG_BUFFER | EFFECT_CONFIG_SMP_RATE | \
- EFFECT_CONFIG_CHANNELS | EFFECT_CONFIG_FORMAT | \
- EFFECT_CONFIG_ACC_MODE | EFFECT_CONFIG_PROVIDER)
-
-
-// effect_config_s structure describes the format of the pCmdData argument of EFFECT_CMD_CONFIGURE
-// command to configure audio parameters and buffers for effect engine input and output.
-typedef struct effect_config_s {
- buffer_config_t inputCfg;
- buffer_config_t outputCfg;;
-} effect_config_t;
-
-
-// effect_param_s structure describes the format of the pCmdData argument of EFFECT_CMD_SET_PARAM
-// command and pCmdData and pReplyData of EFFECT_CMD_GET_PARAM command.
-// psize and vsize represent the actual size of parameter and value.
-//
-// NOTE: the start of value field inside the data field is always on a 32 bit boundary:
-//
-// +-----------+
-// | status | sizeof(int)
-// +-----------+
-// | psize | sizeof(int)
-// +-----------+
-// | vsize | sizeof(int)
-// +-----------+
-// | | | |
-// ~ parameter ~ > psize |
-// | | | > ((psize - 1)/sizeof(int) + 1) * sizeof(int)
-// +-----------+ |
-// | padding | |
-// +-----------+
-// | | |
-// ~ value ~ > vsize
-// | | |
-// +-----------+
-
-typedef struct effect_param_s {
- int32_t status; // Transaction status (unused for command, used for reply)
- uint32_t psize; // Parameter size
- uint32_t vsize; // Value size
- char data[]; // Start of Parameter + Value data
-} effect_param_t;
-
-
-/////////////////////////////////////////////////
-// Effect library interface
-/////////////////////////////////////////////////
-
-// An effect library is required to implement and expose the following functions
-// to enable effect enumeration and instantiation. The name of these functions must be as
-// specified here as the effect framework will get the function address with dlsym():
-//
-// - effect_QueryNumberEffects_t EffectQueryNumberEffects;
-// - effect_QueryEffect_t EffectQueryEffect;
-// - effect_CreateEffect_t EffectCreate;
-// - effect_ReleaseEffect_t EffectRelease;
-
-
-////////////////////////////////////////////////////////////////////////////////
-//
-// Function: EffectQueryNumberEffects
-//
-// Description: Returns the number of different effects exposed by the
-// library. Each effect must have a unique effect uuid (see
-// effect_descriptor_t). This function together with EffectQueryEffect()
-// is used to enumerate all effects present in the library.
-//
-// Input/Output:
-// pNumEffects: address where the number of effects should be returned.
-//
-// Output:
-// returned value: 0 successful operation.
-// -ENODEV library failed to initialize
-// -EINVAL invalid pNumEffects
-// *pNumEffects: updated with number of effects in library
-//
-////////////////////////////////////////////////////////////////////////////////
-typedef int32_t (*effect_QueryNumberEffects_t)(uint32_t *pNumEffects);
-
-////////////////////////////////////////////////////////////////////////////////
-//
-// Function: EffectQueryEffect
-//
-// Description: Returns the descriptor of the effect engine which index is
-// given as first argument.
-// See effect_descriptor_t for details on effect descriptors.
-// This function together with EffectQueryNumberEffects() is used to enumerate all
-// effects present in the library. The enumeration sequence is:
-// EffectQueryNumberEffects(&num_effects);
-// for (i = 0; i < num_effects; i++)
-// EffectQueryEffect(i,...);
-//
-// Input/Output:
-// index: index of the effect
-// pDescriptor: address where to return the effect descriptor.
-//
-// Output:
-// returned value: 0 successful operation.
-// -ENODEV library failed to initialize
-// -EINVAL invalid pDescriptor or index
-// -ENOSYS effect list has changed since last execution of
-// EffectQueryNumberEffects()
-// -ENOENT no more effect available
-// *pDescriptor: updated with the effect descriptor.
-//
-////////////////////////////////////////////////////////////////////////////////
-typedef int32_t (*effect_QueryEffect_t)(uint32_t index,
- effect_descriptor_t *pDescriptor);
-
-////////////////////////////////////////////////////////////////////////////////
-//
-// Function: EffectCreate
-//
-// Description: Creates an effect engine of the specified type and returns an
-// effect control interface on this engine. The function will allocate the
-// resources for an instance of the requested effect engine and return
-// a handle on the effect control interface.
-//
-// Input:
-// uuid: pointer to the effect uuid.
-// sessionId: audio session to which this effect instance will be attached. All effects
-// created with the same session ID are connected in series and process the same signal
-// stream. Knowing that two effects are part of the same effect chain can help the
-// library implement some kind of optimizations.
-// ioId: identifies the output or input stream this effect is directed to at audio HAL.
-// For future use especially with tunneled HW accelerated effects
-//
-// Input/Output:
-// pInterface: address where to return the effect interface.
-//
-// Output:
-// returned value: 0 successful operation.
-// -ENODEV library failed to initialize
-// -EINVAL invalid pEffectUuid or pInterface
-// -ENOENT no effect with this uuid found
-// *pInterface: updated with the effect interface handle.
-//
-////////////////////////////////////////////////////////////////////////////////
-typedef int32_t (*effect_CreateEffect_t)(effect_uuid_t *uuid,
- int32_t sessionId,
- int32_t ioId,
- effect_interface_t *pInterface);
-
-////////////////////////////////////////////////////////////////////////////////
-//
-// Function: EffectRelease
-//
-// Description: Releases the effect engine whose handle is given as argument.
-// All resources allocated to this particular instance of the effect are
-// released.
-//
-// Input:
-// interface: handle on the effect interface to be released.
-//
-// Output:
-// returned value: 0 successful operation.
-// -ENODEV library failed to initialize
-// -EINVAL invalid interface handle
-//
-////////////////////////////////////////////////////////////////////////////////
-typedef int32_t (*effect_ReleaseEffect_t)(effect_interface_t interface);
-
-
-#if __cplusplus
-} // extern "C"
-#endif
-
-
-#endif /*ANDROID_EFFECTAPI_H_*/