diff options
| -rw-r--r-- | gfx/cairo/cairo/COPYING | 8 | ||||
| -rw-r--r-- | gfx/cairo/cairo/INSTALL | 187 | ||||
| -rw-r--r-- | gfx/cairo/cairo/README | 5 | ||||
| -rw-r--r-- | gfx/cairo/cairo/src/cairo-features.h.in | 4 | ||||
| -rw-r--r-- | gfx/cairo/cairo/src/cairo-mutex-impl-private.h | 4 | ||||
| -rw-r--r-- | gfx/cairo/moz.build | 11 |
6 files changed, 25 insertions, 194 deletions
diff --git a/gfx/cairo/cairo/COPYING b/gfx/cairo/cairo/COPYING index 26feb1096..184e603c3 100644 --- a/gfx/cairo/cairo/COPYING +++ b/gfx/cairo/cairo/COPYING @@ -1,10 +1,10 @@ Cairo is free software. This (modified) version of the cairo implementation is available to be -redistributed and/or modified under the terms of either the Mozilla -Public License (MPL) version 2.0. Some files in the original cairo -source code are available under more liberal terms, but we believe that -in all cases, each file may be used under the MPL 2.0. +redistributed and/or modified under the terms the Mozilla Public License +(MPL) version 2.0. Some files in the original cairo source code are +available under more liberal terms, but we believe that in all cases, +each file may be used under the MPL 2.0. Where the original code was not explicitly MPL licensed, the original more liberal license information and copyright has been retained for diff --git a/gfx/cairo/cairo/INSTALL b/gfx/cairo/cairo/INSTALL deleted file mode 100644 index dfff8bebb..000000000 --- a/gfx/cairo/cairo/INSTALL +++ /dev/null @@ -1,187 +0,0 @@ -Quick-start build instructions ------------------------------- -1) Configure the package: - - ./configure - -2) Compile it: - - make - -3) Install it: - - make install - -This final step may require temporary root access (eg. with sudo) if -you don't have write permission to the directory in which cairo will -be installed. - -NOTE: If you are working with source from git/cvs rather than from a tar -file, then you should use ./autogen.sh in place of ./configure -anywhere it is mentioned in these instructions. - -More detailed build instructions --------------------------------- -1) Configure the package - - The first step in building cairo is to configure the package by - running the configure script. [Note: if you don't have a configure - script, skip down below to the Extremely detailed build - instructions.] - - The configure script attempts to automatically detect as much as - possible about your system. So, you should primarily just accept - its defaults by running: - - ./configure - - The configure script does accept a large number of options for - fine-tuning its behavior. See "./configure --help" for a complete - list. The most commonly used options are discussed here. - - --prefix=PREFIX - - This option specifies the directory under which the software - should be installed. By default configure will choose a - directory such as /usr/local. If you would like to install - cairo to some other location, pass the director to configure - with the --prefix option. For example: - - ./configure --prefix=/opt/cairo - - would install cairo into the /opt/cairo directory. You could - also choose a prefix directory within your home directory if - you don't have write access to any system-wide directory. - - After installing into a custom prefix, you will need to set - some environment variables to allow the software to be - found. Assuming the /opt/cairo prefix and assuming you are - using the bash shell, the following environment variables - should be set: - - PKG_CONFIG_PATH=/opt/cairo/lib/pkgconfig - LD_LIBRARY_PATH=/opt/cairo/lib - export PKG_CONFIG_PATH LD_LIBRARY_PATH - - (NOTE: On Mac OS X, at least, use DYLD_LIBRARY_PATH in place - of LD_LIBRARY_PATH above.) - - --enable-quartz - --enable-atsui - --enable-xcb - --enable-glitz - --enable-beos - --enable-os2 - --enable-directfb - - Some of cairo's backends are marked as experimental and will - not be built by default. If you would like to build and - experiment with these backends, you will need to pass one of - the above options to the configure script. You may need to - have certain libraries installed first as discussed in the - dependencies section of the README file. - - --disable-xlib - --disable-win32 - --disable-png - --disable-freetype - --disable-ps - --disable-pdf - --disable-svg - - Cairo's configure script detects the libraries needed to build - each stable backend, and when it finds them, enables each - backend. If you would like to override this detection and - disable a backend, (even when it would be possible to build - it), use one of the options above to disable the backend. - -2) Compile the package: - - This step is very simple. Just: - - make - - The Makefiles included with cairo are designed to work on as many - different systems as possible. - - When cairo is compiled, you can also run some automated tests of - cairo with: - - make check - - NOTE: Some versions of X servers will cause the -xlib tests to - report failures in make check even when cairo is working just - fine. If you see failures in nothing but -xlib tests, please - examine the corresponding -xlib-out.png images and compare them to - the -ref.png reference images (the -xlib-diff.png images might also - be useful). If the results seem "close enough" please do not report - a bug against cairo as the "failures" you are seeing are just due - to subtle variations in X server implementations. - -3) Install the package: - - The final step is to install the package with: - - make install - - If you are installing to a system-wide location you may need to - temporarily acquire root access in order to perform this - operation. A good way to do this is to use the sudo program: - - sudo make install - -Extremely detailed build instructions -------------------------------------- -So you want to build cairo but it didn't come with a configure -script. This is probably because you have checked out the latest -in-development code via git. If you need to be on the bleeding edge, -(for example, because you're wanting to develop some aspect of cairo -itself), then you're in the right place and should read on. - -However, if you don't need such a bleeding-edge version of cairo, then -you might prefer to start by building the latest stable cairo release: - - http://cairographics.org/releases - -or perhaps the latest (unstable) development snapshot: - - http://cairographics.org/snapshots - -There you'll find nicely packaged tar files that include a configure -script so you can go back the the simpler instructions above. - -But you're still reading, so you're someone that loves to -learn. Excellent! We hope you'll learn enough to make some excellent -contributions to cairo. Since you're not using a packaged tar file, -you're going to need some additional tools beyond just a C compiler in -order to compile cairo. Specifically, you need the following utilities: - - automake (1.8 or newer) - autoconf - libtool - -Hopefully your platform of choice has packages readily available so -that you can easily install things with your system's package -management tool, (such as "apt-get install automake" on Debian or "yum -install automake" on Fedora, etc.). Note that Mac OS X ships with it's -own utility called libtool which is not what you want, (the one you do -want goes by the name of glibtool). - -Once you have all of those packages installed, the next step is to run -the autogen.sh script. That can be as simple as: - - ./autogen.sh - -Or, if you're using Mac OS X, you'll have to let it know to use -glibtool by instead doing: - - LIBTOOLIZE=glibtoolize ./autogen.sh - -But before you run that command, note that the autogen.sh script -accepts all the same arguments as the configure script, (and in fact, -will generate the configure script and run it with the arguments you -provide). So go back up to step (1) above and see what additional -arguments you might want to pass, (such as prefix). Then continue with -the instructions, simply using ./autogen.sh in place of ./configure. - -Happy hacking! diff --git a/gfx/cairo/cairo/README b/gfx/cairo/cairo/README index efca44cda..fc801fee3 100644 --- a/gfx/cairo/cairo/README +++ b/gfx/cairo/cairo/README @@ -1,3 +1,8 @@ +Important note: the source code included in this directory is a subset +of the library, insofar as is needed to supply functionality to the +UXP source. For the complete and unmodified source of Cairo, please +go to the website indicated below. + Cairo - Multi-platform 2D graphics library http://cairographics.org diff --git a/gfx/cairo/cairo/src/cairo-features.h.in b/gfx/cairo/cairo/src/cairo-features.h.in index e3db6a8f2..9692c7cb7 100644 --- a/gfx/cairo/cairo/src/cairo-features.h.in +++ b/gfx/cairo/cairo/src/cairo-features.h.in @@ -20,8 +20,8 @@ #endif #define CAIRO_VERSION_MAJOR 1 -#define CAIRO_VERSION_MINOR 9 -#define CAIRO_VERSION_MICRO 5 +#define CAIRO_VERSION_MINOR 10 +#define CAIRO_VERSION_MICRO 28 @PS_SURFACE_FEATURE@ diff --git a/gfx/cairo/cairo/src/cairo-mutex-impl-private.h b/gfx/cairo/cairo/src/cairo-mutex-impl-private.h index 7813ba46f..72086036c 100644 --- a/gfx/cairo/cairo/src/cairo-mutex-impl-private.h +++ b/gfx/cairo/cairo/src/cairo-mutex-impl-private.h @@ -141,7 +141,9 @@ #elif defined(_WIN32) /******************************************************/ -#define WIN32_LEAN_AND_MEAN +#ifndef WIN32_LEAN_AND_MEAN +# define WIN32_LEAN_AND_MEAN +#endif /* We require Windows 7 features */ #if !defined(WINVER) || (WINVER < 0x0601) # define WINVER 0x0601 diff --git a/gfx/cairo/moz.build b/gfx/cairo/moz.build new file mode 100644 index 000000000..177484753 --- /dev/null +++ b/gfx/cairo/moz.build @@ -0,0 +1,11 @@ +# -*- Mode: python; indent-tabs-mode: nil; tab-width: 40 -*- +# vim: set filetype=python: +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. + +DIRS += ['cairo/src'] + +if CONFIG['MOZ_TREE_PIXMAN']: + DIRS += ['libpixman/src'] + |