Add m-esr52 at 52.6.0

1 files changed, 362 insertions, 0 deletions

diff --git a/xpcom/io/SnappyUncompressInputStream.cpp b/xpcom/io/SnappyUncompressInputStream.cpp
new file mode 100644
index 000000000..e0a1b6f4c
--- /dev/null
+++ b/xpcom/io/SnappyUncompressInputStream.cpp
@@ -0,0 +1,362 @@
+/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* vim: set ts=8 sts=2 et sw=2 tw=80: */
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+#include "mozilla/SnappyUncompressInputStream.h"
+
+#include <algorithm>
+#include "nsIAsyncInputStream.h"
+#include "nsStreamUtils.h"
+#include "snappy/snappy.h"
+
+namespace mozilla {
+
+NS_IMPL_ISUPPORTS(SnappyUncompressInputStream,
+                  nsIInputStream);
+
+// Putting kCompressedBufferLength inside a function avoids a static
+// constructor.
+static size_t CompressedBufferLength()
+{
+  static size_t kCompressedBufferLength =
+      detail::SnappyFrameUtils::MaxCompressedBufferLength(snappy::kBlockSize);
+
+  MOZ_ASSERT(kCompressedBufferLength > 0);
+  return kCompressedBufferLength;
+}
+
+SnappyUncompressInputStream::SnappyUncompressInputStream(nsIInputStream* aBaseStream)
+  : mBaseStream(aBaseStream)
+  , mUncompressedBytes(0)
+  , mNextByte(0)
+  , mNextChunkType(Unknown)
+  , mNextChunkDataLength(0)
+  , mNeedFirstStreamIdentifier(true)
+{
+  // This implementation only supports sync base streams.  Verify this in debug
+  // builds.  Note, this is a bit complicated because the streams we support
+  // advertise different capabilities:
+  //  - nsFileInputStream - blocking and sync
+  //  - nsStringInputStream - non-blocking and sync
+  //  - nsPipeInputStream - can be blocking, but provides async interface
+#ifdef DEBUG
+  bool baseNonBlocking;
+  nsresult rv = mBaseStream->IsNonBlocking(&baseNonBlocking);
+  MOZ_ASSERT(NS_SUCCEEDED(rv));
+  if (baseNonBlocking) {
+    nsCOMPtr<nsIAsyncInputStream> async = do_QueryInterface(mBaseStream);
+    MOZ_ASSERT(!async);
+  }
+#endif
+}
+
+NS_IMETHODIMP
+SnappyUncompressInputStream::Close()
+{
+  if (!mBaseStream) {
+    return NS_OK;
+  }
+
+  mBaseStream->Close();
+  mBaseStream = nullptr;
+
+  mUncompressedBuffer = nullptr;
+  mCompressedBuffer = nullptr;
+
+  return NS_OK;
+}
+
+NS_IMETHODIMP
+SnappyUncompressInputStream::Available(uint64_t* aLengthOut)
+{
+  if (!mBaseStream) {
+    return NS_BASE_STREAM_CLOSED;
+  }
+
+  // If we have uncompressed bytes, then we are done.
+  *aLengthOut = UncompressedLength();
+  if (*aLengthOut > 0) {
+    return NS_OK;
+  }
+
+  // Otherwise, attempt to uncompress bytes until we get something or the
+  // underlying stream is drained.  We loop here because some chunks can
+  // be StreamIdentifiers, padding, etc with no data.
+  uint32_t bytesRead;
+  do {
+    nsresult rv = ParseNextChunk(&bytesRead);
+    if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+    *aLengthOut = UncompressedLength();
+  } while(*aLengthOut == 0 && bytesRead);
+
+  return NS_OK;
+}
+
+NS_IMETHODIMP
+SnappyUncompressInputStream::Read(char* aBuf, uint32_t aCount,
+                                  uint32_t* aBytesReadOut)
+{
+  return ReadSegments(NS_CopySegmentToBuffer, aBuf, aCount, aBytesReadOut);
+}
+
+NS_IMETHODIMP
+SnappyUncompressInputStream::ReadSegments(nsWriteSegmentFun aWriter,
+                                          void* aClosure, uint32_t aCount,
+                                          uint32_t* aBytesReadOut)
+{
+  *aBytesReadOut = 0;
+
+  if (!mBaseStream) {
+    return NS_BASE_STREAM_CLOSED;
+  }
+
+  nsresult rv;
+
+  // Do not try to use the base stream's ReadSegements here.  Its very
+  // unlikely we will get a single buffer that contains all of the compressed
+  // data and therefore would have to copy into our own buffer anyways.
+  // Instead, focus on making efficient use of the Read() interface.
+
+  while (aCount > 0) {
+    // We have some decompressed data in our buffer.  Provide it to the
+    // callers writer function.
+    if (mUncompressedBytes > 0) {
+      MOZ_ASSERT(mUncompressedBuffer);
+      uint32_t remaining = UncompressedLength();
+      uint32_t numToWrite = std::min(aCount, remaining);
+      uint32_t numWritten;
+      rv = aWriter(this, aClosure, &mUncompressedBuffer[mNextByte], *aBytesReadOut,
+                   numToWrite, &numWritten);
+
+      // As defined in nsIInputputStream.idl, do not pass writer func errors.
+      if (NS_FAILED(rv)) {
+        return NS_OK;
+      }
+
+      // End-of-file
+      if (numWritten == 0) {
+        return NS_OK;
+      }
+
+      *aBytesReadOut += numWritten;
+      mNextByte += numWritten;
+      MOZ_ASSERT(mNextByte <= mUncompressedBytes);
+
+      if (mNextByte == mUncompressedBytes) {
+        mNextByte = 0;
+        mUncompressedBytes = 0;
+      }
+
+      aCount -= numWritten;
+
+      continue;
+    }
+
+    // Otherwise uncompress the next chunk and loop.  Any resulting data
+    // will set mUncompressedBytes which we check at the top of the loop.
+    uint32_t bytesRead;
+    rv = ParseNextChunk(&bytesRead);
+    if (NS_FAILED(rv)) { return rv; }
+
+    // If we couldn't read anything and there is no more data to provide
+    // to the caller, then this is eof.
+    if (bytesRead == 0 && mUncompressedBytes == 0) {
+      return NS_OK;
+    }
+  }
+
+  return NS_OK;
+}
+
+NS_IMETHODIMP
+SnappyUncompressInputStream::IsNonBlocking(bool* aNonBlockingOut)
+{
+  *aNonBlockingOut = false;
+  return NS_OK;
+}
+
+SnappyUncompressInputStream::~SnappyUncompressInputStream()
+{
+  Close();
+}
+
+nsresult
+SnappyUncompressInputStream::ParseNextChunk(uint32_t* aBytesReadOut)
+{
+  // There must not be any uncompressed data already in mUncompressedBuffer.
+  MOZ_ASSERT(mUncompressedBytes == 0);
+  MOZ_ASSERT(mNextByte == 0);
+
+  nsresult rv;
+  *aBytesReadOut = 0;
+
+  // Lazily create our two buffers so we can report OOM during stream
+  // operation.  These allocations only happens once.  The buffers are reused
+  // until the stream is closed.
+  if (!mUncompressedBuffer) {
+    mUncompressedBuffer.reset(new (fallible) char[snappy::kBlockSize]);
+    if (NS_WARN_IF(!mUncompressedBuffer)) {
+      return NS_ERROR_OUT_OF_MEMORY;
+    }
+  }
+
+  if (!mCompressedBuffer) {
+    mCompressedBuffer.reset(new (fallible) char[CompressedBufferLength()]);
+    if (NS_WARN_IF(!mCompressedBuffer)) {
+      return NS_ERROR_OUT_OF_MEMORY;
+    }
+  }
+
+  // We have no decompressed data and we also have not seen the start of stream
+  // yet. Read and validate the StreamIdentifier chunk.  Also read the next
+  // header to determine the size of the first real data chunk.
+  if (mNeedFirstStreamIdentifier) {
+    const uint32_t firstReadLength = kHeaderLength +
+                                     kStreamIdentifierDataLength +
+                                     kHeaderLength;
+    MOZ_ASSERT(firstReadLength <= CompressedBufferLength());
+
+    rv = ReadAll(mCompressedBuffer.get(), firstReadLength, firstReadLength,
+                 aBytesReadOut);
+    if (NS_WARN_IF(NS_FAILED(rv)) || *aBytesReadOut == 0) { return rv; }
+
+    rv = ParseHeader(mCompressedBuffer.get(), kHeaderLength,
+                     &mNextChunkType, &mNextChunkDataLength);
+    if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+    if (NS_WARN_IF(mNextChunkType != StreamIdentifier ||
+                   mNextChunkDataLength != kStreamIdentifierDataLength)) {
+      return NS_ERROR_CORRUPTED_CONTENT;
+    }
+    size_t offset = kHeaderLength;
+
+    mNeedFirstStreamIdentifier = false;
+
+    size_t numRead;
+    size_t numWritten;
+    rv = ParseData(mUncompressedBuffer.get(), snappy::kBlockSize, mNextChunkType,
+                   &mCompressedBuffer[offset],
+                   mNextChunkDataLength, &numWritten, &numRead);
+    if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+    MOZ_ASSERT(numWritten == 0);
+    MOZ_ASSERT(numRead == mNextChunkDataLength);
+    offset += numRead;
+
+    rv = ParseHeader(&mCompressedBuffer[offset], *aBytesReadOut - offset,
+                     &mNextChunkType, &mNextChunkDataLength);
+    if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+
+    return NS_OK;
+  }
+
+  // We have no compressed data and we don't know how big the next chunk is.
+  // This happens when we get an EOF pause in the middle of a stream and also
+  // at the end of the stream.  Simply read the next header and return.  The
+  // chunk body will be read on the next entry into this method.
+  if (mNextChunkType == Unknown) {
+    rv = ReadAll(mCompressedBuffer.get(), kHeaderLength, kHeaderLength,
+                 aBytesReadOut);
+    if (NS_WARN_IF(NS_FAILED(rv)) || *aBytesReadOut == 0) { return rv; }
+
+    rv = ParseHeader(mCompressedBuffer.get(), kHeaderLength,
+                     &mNextChunkType, &mNextChunkDataLength);
+    if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+
+    return NS_OK;
+  }
+
+  // We have no decompressed data, but we do know the size of the next chunk.
+  // Read at least that much from the base stream.
+  uint32_t readLength = mNextChunkDataLength;
+  MOZ_ASSERT(readLength <= CompressedBufferLength());
+
+  // However, if there is enough data in the base stream, also read the next
+  // chunk header.  This helps optimize the stream by avoiding many small reads.
+  uint64_t avail;
+  rv = mBaseStream->Available(&avail);
+  if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+  if (avail >= (readLength + kHeaderLength)) {
+    readLength += kHeaderLength;
+    MOZ_ASSERT(readLength <= CompressedBufferLength());
+  }
+
+  rv = ReadAll(mCompressedBuffer.get(), readLength, mNextChunkDataLength,
+               aBytesReadOut);
+  if (NS_WARN_IF(NS_FAILED(rv)) || *aBytesReadOut == 0) { return rv; }
+
+  size_t numRead;
+  size_t numWritten;
+  rv = ParseData(mUncompressedBuffer.get(), snappy::kBlockSize, mNextChunkType,
+                 mCompressedBuffer.get(), mNextChunkDataLength,
+                 &numWritten, &numRead);
+  if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+  MOZ_ASSERT(numRead == mNextChunkDataLength);
+
+  mUncompressedBytes = numWritten;
+
+  // If we were unable to directly read the next chunk header, then clear
+  // our internal state.  We will have to perform a small read to get the
+  // header the next time we enter this method.
+  if (*aBytesReadOut <= mNextChunkDataLength) {
+    mNextChunkType = Unknown;
+    mNextChunkDataLength = 0;
+    return NS_OK;
+  }
+
+  // We got the next chunk header.  Parse it so that we are ready to for the
+  // next call into this method.
+  rv = ParseHeader(&mCompressedBuffer[numRead], *aBytesReadOut - numRead,
+                   &mNextChunkType, &mNextChunkDataLength);
+  if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+
+  return NS_OK;
+}
+
+nsresult
+SnappyUncompressInputStream::ReadAll(char* aBuf, uint32_t aCount,
+                                     uint32_t aMinValidCount,
+                                     uint32_t* aBytesReadOut)
+{
+  MOZ_ASSERT(aCount >= aMinValidCount);
+
+  *aBytesReadOut = 0;
+
+  if (!mBaseStream) {
+    return NS_BASE_STREAM_CLOSED;
+  }
+
+  uint32_t offset = 0;
+  while (aCount > 0) {
+    uint32_t bytesRead = 0;
+    nsresult rv = mBaseStream->Read(aBuf + offset, aCount, &bytesRead);
+    if (NS_WARN_IF(NS_FAILED(rv))) { return rv; }
+
+    // EOF, but don't immediately return.  We need to validate min read bytes
+    // below.
+    if (bytesRead == 0) {
+      break;
+    }
+
+    *aBytesReadOut += bytesRead;
+    offset += bytesRead;
+    aCount -= bytesRead;
+  }
+
+  // Reading zero bytes is not an error.  Its the expected EOF condition.
+  // Only compare to the minimum valid count if we read at least one byte.
+  if (*aBytesReadOut != 0 && *aBytesReadOut < aMinValidCount) {
+    return NS_ERROR_CORRUPTED_CONTENT;
+  }
+
+  return NS_OK;
+}
+
+size_t
+SnappyUncompressInputStream::UncompressedLength() const
+{
+  MOZ_ASSERT(mNextByte <= mUncompressedBytes);
+  return mUncompressedBytes - mNextByte;
+}
+
+} // namespace mozilla