Remove crashreporter toolkit files.

Resolves #20

9 files changed, 0 insertions, 1457 deletions

diff --git a/toolkit/crashreporter/google-breakpad/android/common-functions.sh b/toolkit/crashreporter/google-breakpad/android/common-functions.sh
deleted file mode 100755
index c00e34f99..000000000
--- a/toolkit/crashreporter/google-breakpad/android/common-functions.sh
+++ /dev/null
@@ -1,372 +0,0 @@
-# Copyright (c) 2012 Google Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google Inc. nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Collection of common shell functions for 'run-checks.sh' et 'test-shell.sh'
-
-# All internal variables and functions use an underscore as a prefix
-# (e.g. _VERBOSE, _ALL_CLEANUPS, etc..).
-
-# Sanitize the environment
-export LANG=C
-export LC_ALL=C
-
-if [ "$BASH_VERSION" ]; then
-  set -o posix
-fi
-
-# Utility functions
-
-_ALL_CLEANUPS=
-
-# Register a function to be called when the script exits, even in case of
-# Ctrl-C, logout, etc.
-# $1: function name.
-atexit () {
-  if [ -z "$_ALL_CLEANUPS" ]; then
-    _ALL_CLEANUPS=$1
-    # Ensure a clean exit when the script is:
-    #  - Exiting normally (EXIT)
-    #  - Interrupted by Ctrl-C (INT)
-    #  - Interrupted by log out (HUP)
-    #  - Being asked to quit nicely (TERM)
-    #  - Being asked to quit and dump core (QUIT)
-    trap "_exit_cleanups \$?" EXIT INT HUP QUIT TERM
-  else
-    _ALL_CLEANUPS="$_ALL_CLEANUPS $1"
-  fi
-}
-
-# Called on exit if at least one function was registered with atexit
-# $1: final exit status code
-_exit_cleanups () {
-  local CLEANUP CLEANUPS
-  # Ignore calls to atexit during cleanups
-  CLEANUPS=$_ALL_CLEANUPS
-  _ALL_CLEANUPS=
-  for CLEANUP in $CLEANUPS; do
-    ($CLEANUP)
-  done
-  exit "$@"
-}
-
-
-
-
-# Dump a panic message then exit.
-# $1+: message
-panic () {
-  echo "ERROR: $@" >&2
-  exit 1
-}
-
-# If the previous command failed, dump a panic message then exit.
-# $1+: message.
-fail_panic () {
-  if [ $? != 0 ]; then
-    panic "$@"
-  fi;
-}
-
-_VERBOSE=0
-
-# Increase verbosity for dump/log/run/run2 functions
-increase_verbosity () {
-  _VERBOSE=$(( $_VERBOSE + 1 ))
-}
-
-# Decrease verbosity
-decrease_verbosity () {
-  _VERBOSE=$(( $_VERBOSE - 1 ))
-}
-
-# Returns success iff verbosity level is higher than a specific value
-# $1: verbosity level
-verbosity_is_higher_than () {
-  [ "$_VERBOSE" -gt "$1" ]
-}
-
-# Returns success iff verbosity level is lower than a specific value
-# $1: verbosity level
-verbosity_is_lower_than () {
-  [ "$_VERBOSE" -le "$1" ]
-}
-
-# Dump message to stdout, unless verbosity is < 0, i.e. --quiet was called
-# $1+: message
-dump () {
-  if [ "$_VERBOSE" -ge 0 ]; then
-    printf "%s\n" "$*"
-  fi
-}
-
-# If --verbose was used, dump a message to stdout.
-# $1+: message
-log () {
-  if [ "$_VERBOSE" -ge 1 ]; then
-    printf "%s\n" "$*"
-  fi
-}
-
-_RUN_LOG=
-
-# Set a run log file that can be used to collect the output of commands that
-# are not displayed.
-set_run_log () {
-  _RUN_LOG=$1
-}
-
-# Run a command. Output depends on $_VERBOSE:
-#   $_VERBOSE <= 0:  Run command, store output into the run log
-#   $_VERBOSE >= 1:  Dump command, run it, output goest to stdout
-# Note: Ideally, the command's output would go to the run log for $_VERBOSE >= 1
-#       but the 'tee' tool doesn't preserve the status code of its input pipe
-#       in case of error.
-run () {
-  local LOGILE
-  if [ "$_RUN_LOG" ]; then
-    LOGFILE=$_RUN_LOG
-  else
-    LOGFILE=/dev/null
-  fi
-
-  if [ "$_VERBOSE" -ge 1 ]; then
-    echo "COMMAND: $@"
-    "$@"
-  else
-    "$@" >>$LOGFILE 2>&1
-  fi
-}
-
-# Same as run(), but only dump command output for $_VERBOSE >= 2
-run2 () {
-  local LOGILE
-  if [ "$_RUN_LOG" ]; then
-    LOGFILE=$_RUN_LOG
-  else
-    LOGFILE=/dev/null
-  fi
-
-  if [ "$_VERBOSE" -ge 1 ]; then
-    echo "COMMAND: $@"
-  fi
-  if [ "$_VERBOSE" -ge 2 ]; then
-    "$@"
-  else
-    "$@" >>$LOGFILE 2>&1
-  fi
-}
-
-# Extract number of cores to speed up the builds
-# Out: number of CPU cores
-get_core_count () {
-  case $(uname -s) in
-    Linux)
-      grep -c -e '^processor' /proc/cpuinfo
-      ;;
-    Darwin)
-      sysctl -n hw.ncpu
-      ;;
-    CYGWIN*|*_NT-*)
-      echo $NUMBER_OF_PROCESSORS
-      ;;
-    *)
-      echo 1
-      ;;
-  esac
-}
-
-
-# Check for the Android ADB program.
-#
-# On success, return nothing, but updates internal variables so later calls to
-# adb_shell, adb_push, etc.. will work. You can get the path to the ADB program
-# with adb_get_program if needed.
-#
-# On failure, returns 1, and updates the internal adb error message, which can
-# be retrieved with adb_get_error.
-#
-# $1: optional ADB program path.
-# Return: success or failure.
-_ADB=
-_ADB_STATUS=
-_ADB_ERROR=
-
-adb_check () {
-  # First, try to find the executable in the path, or the SDK install dir.
-  _ADB=$1
-  if [ -z "$_ADB" ]; then
-    _ADB=$(which adb 2>/dev/null)
-    if [ -z "$_ADB" -a "$ANDROID_SDK_ROOT" ]; then
-      _ADB=$ANDROID_SDK_ROOT/platform-tools/adb
-      if [ ! -f "$_ADB" ]; then
-        _ADB=
-      fi
-    fi
-    if [ -z "$_ADB" ]; then
-      _ADB_STATUS=1
-      _ADB_ERROR="The Android 'adb' tool is not in your path."
-      return 1
-    fi
-  fi
-
-  log "Found ADB program: $_ADB"
-
-  # Check that it works correctly
-  local ADB_VERSION
-  ADB_VERSION=$("$_ADB" version 2>/dev/null)
-  case $ADB_VERSION in
-    "Android Debug Bridge "*) # Pass
-      log "Found ADB version: $ADB_VERSION"
-      ;;
-    *) # Fail
-      _ADB_ERROR="Your ADB binary reports a bad version ($ADB_VERSION): $_ADB"
-      _ADB_STATUS=1
-      return 1
-  esac
-
-  _ADB_STATUS=0
-  return 0
-}
-
-
-# Return the path to the Android ADB program, if correctly detected.
-# On failure, return the empty string.
-# Out: ADB program path (or empty on failure)
-# Return: success or failure.
-adb_get_program () {
-  # Return cached value as soon as possible.
-  if [ -z "$_ADB_STATUS" ]; then
-    adb_check $1
-  fi
-  echo "$_ADB"
-  return $_ADB_STATUS
-}
-
-# Return the error corresponding to the last ADB function failure.
-adb_get_error () {
-  echo "$_ADB_ERROR"
-}
-
-# Check that there is one device connected through ADB.
-# In case of failure, use adb_get_error to know why this failed.
-# $1: Optional adb program path
-# Return: success or failure.
-_ADB_DEVICE=
-_ADB_DEVICE_STATUS=
-adb_check_device () {
-  if [ "$_ADB_DEVICE_STATUS" ]; then
-    return $_ADB_DEVICE_STATUS
-  fi
-
-  # Check for ADB.
-  if ! adb_check $1; then
-    _ADB_DEVICE_STATUS=$_ADB_STATUS
-    return 1
-  fi
-
-  local ADB_DEVICES NUM_DEVICES FINGERPRINT
-
-  # Count the number of connected devices.
-  ADB_DEVICES=$("$_ADB" devices 2>/dev/null | awk '$2 == "device" { print $1; }')
-  NUM_DEVICES=$(echo "$ADB_DEVICES" | wc -l)
-  case $NUM_DEVICES in
-    0)
-      _ADB_ERROR="No Android device connected. Please connect one to your machine."
-      _ADB_DEVICE_STATUS=1
-      return 1
-      ;;
-    1) # Pass
-      # Ensure the same device will be called in later adb_shell calls.
-      export ANDROID_SERIAL=$ADB_DEVICES
-      ;;
-    *) # 2 or more devices.
-      if [ "$ANDROID_SERIAL" ]; then
-        ADB_DEVICES=$ANDROID_SERIAL
-        NUM_DEVICES=1
-      else
-        _ADB_ERROR="More than one Android device connected. \
-Please define ANDROID_SERIAL in your environment"
-        _ADB_DEVICE_STATUS=1
-        return 1
-      fi
-      ;;
-  esac
-
-  _ADB_DEVICE_STATUS=0
-  _ADB_DEVICE=$ADB_DEVICES
-
-  FINGERPRINT=$(adb_shell getprop ro.build.fingerprint)
-  log "Using ADB device: $ANDROID_SERIAL ($FINGERPRINT)"
-  return 0
-}
-
-# The 'adb shell' command is pretty hopeless, try to make sense of it by:
-#   1/ Removing trailing \r from line endings.
-#   2/ Ensuring the function returns the command's status code.
-#
-# $1+: Command
-# Out: command output (stdout + stderr combined)
-# Return: command exit status
-adb_shell () {
-  local RET ADB_LOG
-  # Check for ADB device.
-  adb_check_device || return 1
-  ADB_LOG=$(mktemp "${TMPDIR:-/tmp}/adb-XXXXXXXX")
-  "$_ADB" shell "$@" ";" echo \$? > "$ADB_LOG" 2>&1
-  sed -i -e 's![[:cntrl:]]!!g' "$ADB_LOG"  # Remove \r.
-  RET=$(sed -e '$!d' "$ADB_LOG")           # Last line contains status code.
-  sed -e '$d' "$ADB_LOG"                   # Print everything except last line.
-  rm -f "$ADB_LOG"
-  return $RET
-}
-
-# Push a file to a device.
-# $1: source file path
-# $2: device target file path
-# Return: success or failure.
-adb_push () {
-  adb_check_device || return 1
-  run "$_ADB" push "$1" "$2"
-}
-
-# Pull a file from a device
-# $1: device file path
-# $2: target host file path
-# Return: success or failure.
-adb_pull () {
-  adb_check_device || return 1
-  run "$_ADB" pull "$1" "$2"
-}
-
-# Same as adb_push, but will panic if the operations didn't succeed.
-adb_install () {
-  adb_push "$@"
-  fail_panic "Failed to install $1 to the Android device at $2"
-}
-
diff --git a/toolkit/crashreporter/google-breakpad/android/google_breakpad/Android.mk b/toolkit/crashreporter/google-breakpad/android/google_breakpad/Android.mk
deleted file mode 100644
index 74625eb55..000000000
--- a/toolkit/crashreporter/google-breakpad/android/google_breakpad/Android.mk
+++ /dev/null
@@ -1,103 +0,0 @@
-# Copyright (c) 2012, Google Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google Inc. nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# ndk-build module definition for the Google Breakpad client library
-#
-# To use this file, do the following:
-#
-#   1/ Include this file from your own Android.mk, either directly
-#      or with through the NDK's import-module function.
-#
-#   2/ Use the client static library in your project with:
-#
-#      LOCAL_STATIC_LIBRARIES += breakpad_client
-#
-#   3/ In your source code, include "src/client/linux/exception_handler.h"
-#      and use the Linux instructions to use it.
-#
-# This module works with either the STLport or GNU libstdc++, but you need
-# to select one in your Application.mk
-#
-
-# The top Google Breakpad directory.
-# We assume this Android.mk to be under 'android/google_breakpad'
-
-LOCAL_PATH := $(call my-dir)/../..
-
-# Defube the client library module, as a simple static library that
-# exports the right include path / linker flags to its users.
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := breakpad_client
-
-LOCAL_CPP_EXTENSION := .cc
-
-# Breakpad uses inline ARM assembly that requires the library
-# to be built in ARM mode. Otherwise, the build will fail with
-# cryptic assembler messages like:
-#   Compile++ thumb  : google_breakpad_client <= crash_generation_client.cc
-#   /tmp/cc8aMSoD.s: Assembler messages:
-#   /tmp/cc8aMSoD.s:132: Error: invalid immediate: 288 is out of range
-#   /tmp/cc8aMSoD.s:244: Error: invalid immediate: 296 is out of range
-LOCAL_ARM_MODE := arm
-
-# List of client source files, directly taken from Makefile.am
-LOCAL_SRC_FILES := \
-    src/client/linux/crash_generation/crash_generation_client.cc \
-    src/client/linux/dump_writer_common/thread_info.cc \
-    src/client/linux/dump_writer_common/ucontext_reader.cc \
-    src/client/linux/handler/exception_handler.cc \
-    src/client/linux/handler/minidump_descriptor.cc \
-    src/client/linux/log/log.cc \
-    src/client/linux/microdump_writer/microdump_writer.cc \
-    src/client/linux/minidump_writer/linux_dumper.cc \
-    src/client/linux/minidump_writer/linux_ptrace_dumper.cc \
-    src/client/linux/minidump_writer/minidump_writer.cc \
-    src/client/minidump_file_writer.cc \
-    src/common/android/breakpad_getcontext.S \
-    src/common/convert_UTF.c \
-    src/common/md5.cc \
-    src/common/string_conversion.cc \
-    src/common/linux/elfutils.cc \
-    src/common/linux/file_id.cc \
-    src/common/linux/guid_creator.cc \
-    src/common/linux/linux_libc_support.cc \
-    src/common/linux/memory_mapped_file.cc \
-    src/common/linux/safe_readlink.cc
-
-LOCAL_C_INCLUDES        := $(LOCAL_PATH)/src/common/android/include \
-                           $(LOCAL_PATH)/src
-
-LOCAL_EXPORT_C_INCLUDES := $(LOCAL_C_INCLUDES)
-LOCAL_EXPORT_LDLIBS     := -llog
-
-include $(BUILD_STATIC_LIBRARY)
-
-# Done.
\ No newline at end of file
diff --git a/toolkit/crashreporter/google-breakpad/android/run-checks.sh b/toolkit/crashreporter/google-breakpad/android/run-checks.sh
deleted file mode 100755
index 51d2d5023..000000000
--- a/toolkit/crashreporter/google-breakpad/android/run-checks.sh
+++ /dev/null
@@ -1,555 +0,0 @@
-#!/bin/sh
-# Copyright (c) 2012 Google Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google Inc. nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Sanitize the environment
-export LANG=C
-export LC_ALL=C
-
-if [ "$BASH_VERSION" ]; then
-  set -o posix
-fi
-
-PROGDIR=$(dirname "$0")
-PROGDIR=$(cd "$PROGDIR" && pwd)
-PROGNAME=$(basename "$0")
-
-. $PROGDIR/common-functions.sh
-
-DEFAULT_ABI="armeabi"
-VALID_ABIS="armeabi armeabi-v7a x86 mips"
-
-ABI=
-ADB=
-ALL_TESTS=
-ENABLE_M32=
-HELP=
-HELP_ALL=
-NDK_DIR=
-NO_CLEANUP=
-NO_DEVICE=
-NUM_JOBS=$(get_core_count)
-TMPDIR=
-
-for opt do
-  # The following extracts the value if the option is like --name=<value>.
-  optarg=$(expr -- $opt : '^--[^=]*=\(.*\)$')
-  case $opt in
-    --abi=*) ABI=$optarg;;
-    --adb=*) ADB=$optarg;;
-    --all-tests) ALL_TESTS=true;;
-    --enable-m32) ENABLE_M32=true;;
-    --help|-h|-?) HELP=TRUE;;
-    --help-all) HELP_ALL=true;;
-    --jobs=*) NUM_JOBS=$optarg;;
-    --ndk-dir=*) NDK_DIR=$optarg;;
-    --tmp-dir=*) TMPDIR=$optarg;;
-    --no-cleanup) NO_CLEANUP=true;;
-    --no-device) NO_DEVICE=true;;
-    --quiet) decrease_verbosity;;
-    --verbose) increase_verbosity;;
-    -*) panic "Invalid option '$opt', see --help for details.";;
-    *) panic "This script doesn't take any parameters. See --help for details."
-       ;;
-  esac
-done
-
-if [ "$HELP" -o "$HELP_ALL" ]; then
-  echo "\
-  Usage: $PROGNAME [options]
-
-  This script is used to check that your Google Breakpad source tree can
-  be properly built for Android, and that the client library and host tools
-  work properly together.
-"
-  if [ "$HELP_ALL" ]; then
-    echo "\
-  In more details, this script will:
-
-  - Rebuild the host version of Google Breakpad in a temporary
-    directory (with the Auto-tools based build system).
-
-  - Rebuild the Android client library with the Google Breakpad build
-    system (using autotools/configure). This requires that you define
-    ANDROID_NDK_ROOT in your environment to point to a valid Android NDK
-    installation directory, or use the --ndk-dir=<path> option.
-
-  - Rebuild the Android client library and a test crashing program with the
-    Android NDK build system (ndk-build).
-
-  - Require an Android device connected to your machine, and the 'adb'
-    tool in your path. They are used to:
-
-      - Install and  run a test crashing program.
-      - Extract the corresponding minidump from the device.
-      - Dump the symbols from the test program on the host with 'dump_syms'
-      - Generate a stack trace with 'minidump_stackwalk'
-      - Check the stack trace content for valid source file locations.
-
-    You can however skip this requirement and only test the builds by using
-    the --no-device flag.
-
-    By default, all generated files will be created in a temporary directory
-    that is removed when the script completion. If you want to inspect the
-    files, use the --no-cleanup option.
-
-    Finally, use --verbose to increase the verbosity level, this will help
-    you see which exact commands are being issues and their result. Use the
-    flag twice for even more output. Use --quiet to decrease verbosity
-    instead and run the script silently.
-
-    If you have a device connected, the script will probe it to determine
-    its primary CPU ABI, and build the test program for it. You can however
-    use the --abi=<name> option to override this (this can be useful to check
-    the secondary ABI, e.g. using --abi=armeabi to check that such a program
-    works correctly on an ARMv7-A device).
-
-    If you don't have a device connected, the test program will be built (but
-    not run) with the default '$DEFAULT_ABI' ABI. Again, you can use
-    --abi=<name> to override this. Valid ABI names are:
-
-        $VALID_ABIS
-
-    The script will only run the client library unit test on the device
-    by default. You can use --all-tests to also build and run the unit
-    tests for the Breakpad tools and processor, but be warned that this
-    adds several minutes of testing time. --all-tests will also run the
-    host unit tests suite.
-"
-
-  fi  # HELP_ALL
-
-  echo "\
-  Valid options:
-
-      --help|-h|-?     Display this message.
-      --help-all       Display extended help.
-      --enable-m32     Build 32-bit version of host tools.
-      --abi=<name>     Specify target CPU ABI [auto-detected].
-      --jobs=<count>   Run <count> build tasks in parallel [$NUM_JOBS].
-      --ndk-dir=<path> Specify NDK installation directory.
-      --tmp-dir=<path> Specify temporary directory (will be wiped-out).
-      --adb=<path>     Specify adb program path.
-      --no-cleanup     Don't remove temporary directory after completion.
-      --no-device      Do not try to detect devices, nor run crash test.
-      --all-tests      Run all unit tests (i.e. tools and processor ones too).
-      --verbose        Increase verbosity.
-      --quiet          Decrease verbosity."
-
-  exit 0
-fi
-
-TESTAPP_DIR=$PROGDIR/sample_app
-
-# Select NDK install directory.
-if [ -z "$NDK_DIR" ]; then
-  if [ -z "$ANDROID_NDK_ROOT" ]; then
-    panic "Please define ANDROID_NDK_ROOT in your environment, or use \
---ndk-dir=<path>."
-  fi
-  NDK_DIR="$ANDROID_NDK_ROOT"
-  log "Found NDK directory: $NDK_DIR"
-else
-  log "Using NDK directory: $NDK_DIR"
-fi
-# Small sanity check.
-NDK_BUILD="$NDK_DIR/ndk-build"
-if [ ! -f "$NDK_BUILD" ]; then
-  panic "Your NDK directory is not valid (missing ndk-build): $NDK_DIR"
-fi
-
-# Ensure the temporary directory is deleted on exit, except if the --no-cleanup
-# option is used.
-
-clean_tmpdir () {
-  if [ "$TMPDIR" ]; then
-    if [ -z "$NO_CLEANUP" ]; then
-      log "Cleaning up: $TMPDIR"
-      rm -rf "$TMPDIR"
-    else
-      dump "Temporary directory contents preserved: $TMPDIR"
-    fi
-  fi
-  exit "$@"
-}
-
-atexit clean_tmpdir
-
-# If --tmp-dir=<path> is not used, create a temporary directory.
-# Otherwise, start by cleaning up the user-provided path.
-if [ -z "$TMPDIR" ]; then
-  TMPDIR=$(mktemp -d /tmp/$PROGNAME.XXXXXXXX)
-  fail_panic "Can't create temporary directory!"
-  log "Using temporary directory: $TMPDIR"
-else
-  if [ ! -d "$TMPDIR" ]; then
-    mkdir -p "$TMPDIR"
-    fail_panic "Can't create temporary directory: $TMPDIR"
-  else
-    log "Cleaning up temporary directory: $TMPDIR"
-    rm -rf "$TMPDIR"/*
-    fail_panic "Cannot cleanup temporary directory!"
-  fi
-fi
-
-if [ -z "$NO_DEVICE" ]; then
-  if ! adb_check_device $ADB; then
-    echo "$(adb_get_error)"
-    echo "Use --no-device to build the code without running any tests."
-    exit 1
-  fi
-fi
-
-BUILD_LOG="$TMPDIR/build.log"
-RUN_LOG="$TMPDIR/run.log"
-CRASH_LOG="$TMPDIR/crash.log"
-
-set_run_log "$RUN_LOG"
-
-TMPHOST="$TMPDIR/host-local"
-
-cd "$TMPDIR"
-
-# Build host version of the tools
-dump "Building host binaries."
-CONFIGURE_FLAGS=
-if [ "$ENABLE_M32" ]; then
-  CONFIGURE_FLAGS="$CONFIGURE_FLAGS --enable-m32"
-fi
-(
-  run mkdir "$TMPDIR/build-host" &&
-  run cd "$TMPDIR/build-host" &&
-  run2 "$PROGDIR/../configure" --prefix="$TMPHOST" $CONFIGURE_FLAGS &&
-  run2 make -j$NUM_JOBS install
-)
-fail_panic "Can't build host binaries!"
-
-if [ "$ALL_TESTS" ]; then
-  dump "Running host unit tests."
-  (
-    run cd "$TMPDIR/build-host" &&
-    run2 make -j$NUM_JOBS check
-  )
-  fail_panic "Host unit tests failed!!"
-fi
-
-TMPBIN=$TMPHOST/bin
-
-# Generate a stand-alone NDK toolchain
-
-# Extract CPU ABI and architecture from device, if any.
-if adb_check_device; then
-  DEVICE_ABI=$(adb_shell getprop ro.product.cpu.abi)
-  DEVICE_ABI2=$(adb_shell getprop ro.product.cpu.abi2)
-  if [ -z "$DEVICE_ABI" ]; then
-    panic "Can't extract ABI from connected device!"
-  fi
-  if [ "$DEVICE_ABI2" ]; then
-    dump "Found device ABIs: $DEVICE_ABI $DEVICE_ABI2"
-  else
-    dump "Found device ABI: $DEVICE_ABI"
-    DEVICE_ABI2=$DEVICE_ABI
-  fi
-
-  # If --abi=<name> is used, check that the device supports it.
-  if [ "$ABI" -a "$DEVICE_ABI" != "$ABI" -a "$DEVICE_ABI2" != "$ABI" ]; then
-    dump  "ERROR: Device ABI(s) do not match --abi command-line value ($ABI)!"
-    panic "Please use --no-device to skip device tests."
-  fi
-
-  if [ -z "$ABI" ]; then
-    ABI=$DEVICE_ABI
-    dump "Using CPU ABI: $ABI (device)"
-  else
-    dump "Using CPU ABI: $ABI (command-line)"
-  fi
-else
-  if [ -z "$ABI" ]; then
-    # No device connected, choose default ABI
-    ABI=$DEFAULT_ABI
-    dump "Using CPU ABI: $ABI (default)"
-  else
-    dump "Using CPU ABI: $ABI (command-line)"
-  fi
-fi
-
-# Check the ABI value
-VALID=
-for VALID_ABI in $VALID_ABIS; do
-  if [ "$ABI" = "$VALID_ABI" ]; then
-    VALID=true
-    break
-  fi
-done
-
-if [ -z "$VALID" ]; then
-  panic "Unknown CPU ABI '$ABI'. Valid values are: $VALID_ABIS"
-fi
-
-# Extract architecture name from ABI
-case $ABI in
-  armeabi*) ARCH=arm;;
-  *) ARCH=$ABI;;
-esac
-
-# Extract GNU configuration name
-case $ARCH in
-  arm)
-    GNU_CONFIG=arm-linux-androideabi
-    ;;
-  x86)
-    GNU_CONFIG=i686-linux-android
-    ;;
-  mips)
-    GNU_CONFIG=mipsel-linux-android
-    ;;
-  *)
-    GNU_CONFIG="$ARCH-linux-android"
-    ;;
-esac
-
-# Generate standalone NDK toolchain installation
-NDK_STANDALONE="$TMPDIR/ndk-$ARCH-toolchain"
-echo "Generating NDK standalone toolchain installation"
-mkdir -p "$NDK_STANDALONE"
-# NOTE: The --platform=android-9 is required to provide <regex.h> for GTest.
-run "$NDK_DIR/build/tools/make-standalone-toolchain.sh" \
-      --arch="$ARCH" \
-      --platform=android-9 \
-      --install-dir="$NDK_STANDALONE"
-fail_panic "Can't generate standalone NDK toolchain installation!"
-
-# Rebuild the client library, processor and tools with the auto-tools based
-# build system. Even though it's not going to be used, this checks that this
-# still works correctly.
-echo "Building full Android binaries with configure/make"
-TMPTARGET="$TMPDIR/target-local"
-(
-  PATH="$NDK_STANDALONE/bin:$PATH"
-  run mkdir "$TMPTARGET" &&
-  run mkdir "$TMPDIR"/build-target &&
-  run cd "$TMPDIR"/build-target &&
-  run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
-                               --host="$GNU_CONFIG" &&
-  run2 make -j$NUM_JOBS install
-)
-fail_panic "Could not rebuild Android binaries!"
-
-# Build and/or run unit test suite.
-# If --no-device is used, only rebuild it, otherwise, run in on the
-# connected device.
-if [ "$NO_DEVICE" ]; then
-  ACTION="Building"
-  # This is a trick to force the Makefile to ignore running the scripts.
-  TESTS_ENVIRONMENT="TESTS_ENVIRONMENT=true"
-else
-  ACTION="Running"
-  TESTS_ENVIRONMENT=
-fi
-
-(
-  PATH="$NDK_STANDALONE/bin:$PATH"
-  run cd "$TMPDIR"/build-target &&
-  # Reconfigure to only run the client unit test suite.
-  # This one should _never_ fail.
-  dump "$ACTION Android client library unit tests."
-  run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
-                               --host="$GNU_CONFIG" \
-                               --disable-tools \
-                               --disable-processor &&
-  run make -j$NUM_JOBS check $TESTS_ENVIRONMENT || exit $?
-
-  if [ "$ALL_TESTS" ]; then
-    dump "$ACTION Tools and processor unit tests."
-    # Reconfigure to run the processor and tools tests.
-    # Most of these fail for now, so do not worry about it.
-    run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
-                                 --host="$GNU_CONFIG" &&
-    run make -j$NUM_JOBS check $TESTS_ENVIRONMENT
-    if [ $? != 0 ]; then
-      dump "Tools and processor unit tests failed as expected. \
-Use --verbose for results."
-    fi                           
-  fi
-)
-fail_panic "Client library unit test suite failed!"
-
-# Copy sources to temporary directory
-PROJECT_DIR=$TMPDIR/project
-dump "Copying test program sources to: $PROJECT_DIR"
-run cp -r "$TESTAPP_DIR" "$PROJECT_DIR" &&
-run rm -rf "$PROJECT_DIR/obj" &&
-run rm -rf "$PROJECT_DIR/libs"
-fail_panic "Could not copy test program sources to: $PROJECT_DIR"
-
-# Build the test program with ndk-build.
-dump "Building test program with ndk-build"
-export NDK_MODULE_PATH="$PROGDIR"
-NDK_BUILD_FLAGS="-j$NUM_JOBS"
-if verbosity_is_higher_than 1; then
-  NDK_BUILD_FLAGS="$NDK_BUILD_FLAGS NDK_LOG=1 V=1"
-fi
-run "$NDK_DIR/ndk-build" -C "$PROJECT_DIR" $NDK_BUILD_FLAGS APP_ABI=$ABI
-fail_panic "Can't build test program!"
-
-# Unless --no-device was used, stop right here if ADB isn't in the path,
-# or there is no connected device.
-if [ "$NO_DEVICE" ]; then
-  dump "Done. Please connect a device to run all tests!"
-  clean_exit 0
-fi
-
-# Push the program to the device.
-TESTAPP=test_google_breakpad
-TESTAPP_FILE="$PROJECT_DIR/libs/$ABI/test_google_breakpad"
-if [ ! -f "$TESTAPP_FILE" ]; then
-  panic "Device requires '$ABI' binaries. None found!"
-fi
-
-# Run the program there
-dump "Installing test program on device"
-DEVICE_TMP=/data/local/tmp
-adb_push "$TESTAPP_FILE" "$DEVICE_TMP/"
-fail_panic "Cannot push test program to device!"
-
-dump "Running test program on device"
-adb_shell cd "$DEVICE_TMP" "&&" ./$TESTAPP > "$CRASH_LOG" 2>/dev/null
-if [ $? = 0 ]; then
-  panic "Test program did *not* crash as expected!"
-fi
-if verbosity_is_higher_than 0; then
-  echo -n "Crash log: "
-  cat "$CRASH_LOG"
-fi
-
-# Extract minidump from device
-MINIDUMP_NAME=$(awk '$1 == "Dump" && $2 == "path:" { print $3; }' "$CRASH_LOG")
-MINIDUMP_NAME=$(basename "$MINIDUMP_NAME")
-if [ -z "$MINIDUMP_NAME" ]; then
-  panic "Test program didn't write minidump properly!"
-fi
-
-dump "Extracting minidump: $MINIDUMP_NAME"
-adb_pull "$DEVICE_TMP/$MINIDUMP_NAME" .
-fail_panic "Can't extract minidump!"
-
-dump "Parsing test program symbols"
-if verbosity_is_higher_than 1; then
-  log "COMMAND: $TMPBIN/dump_syms \
-                $PROJECT_DIR/obj/local/$ABI/$TESTAPP >$TESTAPP.sym"
-fi
-"$TMPBIN/dump_syms" "$PROJECT_DIR/obj/local/$ABI/$TESTAPP" > $TESTAPP.sym
-fail_panic "dump_syms doesn't work!"
-
-VERSION=$(awk '$1 == "MODULE" { print $4; }' $TESTAPP.sym)
-dump "Found module version: $VERSION"
-if [ -z "$VERSION" ]; then
-  echo "ERROR: Can't find proper module version from symbol dump!"
-  head -n5 $TESTAPP.sym
-  clean_exit 1
-fi
-
-run mkdir -p "$TMPDIR/symbols/$TESTAPP/$VERSION"
-run mv $TESTAPP.sym "$TMPDIR/symbols/$TESTAPP/$VERSION/"
-
-dump "Generating stack trace"
-# Don't use 'run' to be able to send stdout and stderr to two different files.
-log "COMMAND: $TMPBIN/minidump_stackwalk $MINIDUMP_NAME symbols"
-"$TMPBIN/minidump_stackwalk" $MINIDUMP_NAME \
-                             "$TMPDIR/symbols" \
-                             > "$BUILD_LOG" 2>>"$RUN_LOG"
-fail_panic "minidump_stackwalk doesn't work!"
-
-dump "Checking stack trace content"
-
-if verbosity_is_higher_than 1; then
-  cat "$BUILD_LOG"
-fi
-
-# The generated stack trace should look like the following:
-#
-# Thread 0 (crashed)
-#  0  test_google_breakpad!crash [test_breakpad.cpp : 17 + 0x4]
-#      r4 = 0x00015530    r5 = 0xbea2cbe4    r6 = 0xffffff38    r7 = 0xbea2cb5c
-#      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
-#      sp = 0xbea2cb50    lr = 0x00009025    pc = 0x00008f84
-#     Found by: given as instruction pointer in context
-#  1  test_google_breakpad!main [test_breakpad.cpp : 25 + 0x3]
-#      r4 = 0x00015530    r5 = 0xbea2cbe4    r6 = 0xffffff38    r7 = 0xbea2cb5c
-#      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
-#      sp = 0xbea2cb50    pc = 0x00009025
-#     Found by: call frame info
-#  2  libc.so + 0x164e5
-#      r4 = 0x00008f64    r5 = 0xbea2cc34    r6 = 0x00000001    r7 = 0xbea2cc3c
-#      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
-#      sp = 0xbea2cc18    pc = 0x400c34e7
-#     Found by: call frame info
-# ...
-#
-# The most important part for us is ensuring that the source location could
-# be extracted, so look at the 'test_breakpad.cpp' references here.
-#
-# First, extract all the lines with test_google_breakpad! in them, and
-# dump the corresponding crash location.
-#
-# Note that if the source location can't be extracted, the second field
-# will only be 'test_google_breakpad' without the exclamation mark.
-#
-LOCATIONS=$(awk '$2 ~ "^test_google_breakpad!.*" { print $3; }' "$BUILD_LOG")
-
-if [ -z "$LOCATIONS" ]; then
-  if verbosity_is_lower_than 1; then
-    cat "$BUILD_LOG"
-  fi
-  panic "No source location found in stack trace!"
-fi
-
-# Now check that they all match "[<source file>"
-BAD_LOCATIONS=
-for LOCATION in $LOCATIONS; do
-  case $LOCATION in
-    # Escape the opening bracket, or some shells like Dash will not
-    # match them properly.
-    \[*.cpp|\[*.cc|\[*.h) # These are valid source locations in our executable
-      ;;
-    *) # Everything else is not!
-      BAD_LOCATIONS="$BAD_LOCATIONS $LOCATION"
-      ;;
-  esac
-done
-
-if [ "$BAD_LOCATIONS" ]; then
-  dump "ERROR: Generated stack trace doesn't contain valid source locations:"
-  cat "$BUILD_LOG"
-  echo "Bad locations are: $BAD_LOCATIONS"
-  exit 1
-fi
-
-echo "All clear! Congratulations."
-
diff --git a/toolkit/crashreporter/google-breakpad/android/sample_app/README b/toolkit/crashreporter/google-breakpad/android/sample_app/README
deleted file mode 100644
index aa19dbb44..000000000
--- a/toolkit/crashreporter/google-breakpad/android/sample_app/README
+++ /dev/null
@@ -1,32 +0,0 @@
-This is a sample Android executable that can be used to test the
-Google Breakpad client library on Android.
-
-Its purpose is simply to crash and generate a minidump under /data/local/tmp.
-
-Build instructions:
-
-   cd android/sample_app
-   $NDK/ndk-build
-
-  Where $NDK points to a valid Android NDK installation.
-
-Usage instructions:
-
-   After buildind the test program, send it to a device, then run it as
-   the shell UID:
-
-     adb push libs/armeabi/test_google_breakpad /data/local/tmp
-     adb shell /data/local/tmp/test_google_breakpad
-
-   This will simply crash after dumping the name of the generated minidump
-   file.
-
-   See jni/test_breakpad.cpp for details.
-
-   Use 'armeabi-v7a' instead of 'armeabi' above to test the ARMv7-A version
-   of the binary.
-
-Note:
-   If you plan to use the library in a regular Android application, store
-   the minidump files either to your app-specific directory, or to the SDCard
-   (the latter requiring a specific permission).
diff --git a/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Android.mk b/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Android.mk
deleted file mode 100644
index 61487b52c..000000000
--- a/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Android.mk
+++ /dev/null
@@ -1,44 +0,0 @@
-# Copyright (c) 2012, Google Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google Inc. nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-LOCAL_MODULE := test_google_breakpad
-LOCAL_SRC_FILES := test_breakpad.cpp
-LOCAL_STATIC_LIBRARIES += breakpad_client
-include $(BUILD_EXECUTABLE)
-
-# If NDK_MODULE_PATH is defined, import the module, otherwise do a direct
-# includes. This allows us to build in all scenarios easily.
-ifneq ($(NDK_MODULE_PATH),)
-  $(call import-module,google_breakpad)
-else
-  include $(LOCAL_PATH)/../../google_breakpad/Android.mk
-endif
diff --git a/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Application.mk b/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Application.mk
deleted file mode 100644
index 9728017d3..000000000
--- a/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Application.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright (c) 2012, Google Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google Inc. nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-APP_STL := stlport_static
-APP_ABI := all
-APP_CXXFLAGS := -std=c++11 -D__STDC_LIMIT_MACROS
diff --git a/toolkit/crashreporter/google-breakpad/android/sample_app/jni/test_breakpad.cpp b/toolkit/crashreporter/google-breakpad/android/sample_app/jni/test_breakpad.cpp
deleted file mode 100644
index 9c4ebbb14..000000000
--- a/toolkit/crashreporter/google-breakpad/android/sample_app/jni/test_breakpad.cpp
+++ /dev/null
@@ -1,57 +0,0 @@
-// Copyright (c) 2012, Google Inc.
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include <stdio.h>
-
-#include "client/linux/handler/exception_handler.h"
-#include "client/linux/handler/minidump_descriptor.h"
-
-namespace {
-
-bool DumpCallback(const google_breakpad::MinidumpDescriptor& descriptor,
-                  void* context,
-                  bool succeeded) {
-  printf("Dump path: %s\n", descriptor.path());
-  return succeeded;
-}
-
-void Crash() {
-  volatile int* a = reinterpret_cast<volatile int*>(NULL);
-  *a = 1;
-}
-
-}  // namespace
-
-int main(int argc, char* argv[]) {
-  google_breakpad::MinidumpDescriptor descriptor(".");
-  google_breakpad::ExceptionHandler eh(descriptor, NULL, DumpCallback,
-                                       NULL, true, -1);
-  Crash();
-  return 0;
-}
diff --git a/toolkit/crashreporter/google-breakpad/android/test-driver b/toolkit/crashreporter/google-breakpad/android/test-driver
deleted file mode 100755
index eaaac6b29..000000000
--- a/toolkit/crashreporter/google-breakpad/android/test-driver
+++ /dev/null
@@ -1,131 +0,0 @@
-#! /bin/sh
-# test-driver - basic testsuite driver script.
-
-# Slightly modified for Android, see ANDROID comment below.
-
-scriptversion=2012-06-27.10; # UTC
-
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-# Make unconditional expansion of undefined variables an error.  This
-# helps a lot in preventing typo-related bugs.
-set -u
-
-usage_error ()
-{
-  echo "$0: $*" >&2
-  print_usage >&2
-  exit 2
-}
-
-print_usage ()
-{
-  cat <<END
-Usage:
-  test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
-              [--expect-failure={yes|no}] [--color-tests={yes|no}]
-              [--enable-hard-errors={yes|no}] [--] TEST-SCRIPT
-The '--test-name', '--log-file' and '--trs-file' options are mandatory.
-END
-}
-
-# TODO: better error handling in option parsing (in particular, ensure
-# TODO: $log_file, $trs_file and $test_name are defined).
-test_name= # Used for reporting.
-log_file=  # Where to save the output of the test script.
-trs_file=  # Where to save the metadata of the test run.
-expect_failure=no
-color_tests=no
-enable_hard_errors=yes
-while test $# -gt 0; do
-  case $1 in
-  --help) print_usage; exit $?;;
-  --version) echo "test-driver $scriptversion"; exit $?;;
-  --test-name) test_name=$2; shift;;
-  --log-file) log_file=$2; shift;;
-  --trs-file) trs_file=$2; shift;;
-  --color-tests) color_tests=$2; shift;;
-  --expect-failure) expect_failure=$2; shift;;
-  --enable-hard-errors) enable_hard_errors=$2; shift;;
-  --) shift; break;;
-  -*) usage_error "invalid option: '$1'";;
-  esac
-  shift
-done
-
-if test $color_tests = yes; then
-  # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
-  red='' # Red.
-  grn='' # Green.
-  lgn='' # Light green.
-  blu='' # Blue.
-  mgn='' # Magenta.
-  std=''     # No color.
-else
-  red= grn= lgn= blu= mgn= std=
-fi
-
-do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
-trap "st=129; $do_exit" 1
-trap "st=130; $do_exit" 2
-trap "st=141; $do_exit" 13
-trap "st=143; $do_exit" 15
-
-# Test script is run here.
-# ANDROID: old line was: "$@" > $log_file 2>&1
-progdir=$(dirname "$0")
-"$progdir/test-shell.sh" "$@" > $log_file 2>&1
-estatus=$?
-if test $enable_hard_errors = no && test $estatus -eq 99; then
-  estatus=1
-fi
-
-case $estatus:$expect_failure in
-  0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
-  0:*)   col=$grn res=PASS  recheck=no  gcopy=no;;
-  77:*)  col=$blu res=SKIP  recheck=no  gcopy=yes;;
-  99:*)  col=$mgn res=ERROR recheck=yes gcopy=yes;;
-  *:yes) col=$lgn res=XFAIL recheck=no  gcopy=yes;;
-  *:*)   col=$red res=FAIL  recheck=yes gcopy=yes;;
-esac
-
-# Report outcome to console.
-echo "${col}${res}${std}: $test_name"
-
-# Register the test result, and other relevant metadata.
-echo ":test-result: $res" > $trs_file
-echo ":global-test-result: $res" >> $trs_file
-echo ":recheck: $recheck" >> $trs_file
-echo ":copy-in-global-log: $gcopy" >> $trs_file
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/toolkit/crashreporter/google-breakpad/android/test-shell.sh b/toolkit/crashreporter/google-breakpad/android/test-shell.sh
deleted file mode 100755
index 3677d8755..000000000
--- a/toolkit/crashreporter/google-breakpad/android/test-shell.sh
+++ /dev/null
@@ -1,131 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2012 Google Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google Inc. nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# A special shell wrapper that can be used to run the Google Breakpad unit
-# tests on a connected Android device.
-#
-# This is designed to be called from the Makefile during 'make check'
-#
-
-PROGDIR=$(dirname "$0")
-PROGNAME=$(basename "$0")
-. $PROGDIR/common-functions.sh
-
-# Extract test program name first.
-TEST_PROGRAM=$1
-shift
-
-if [ -z "$TEST_PROGRAM" ]; then
-  panic "No test program/script name on the command-line!"
-fi
-
-if [ ! -f "$TEST_PROGRAM" ]; then
-  panic "Can't find test program/script: $TEST_PROGRAM"
-fi
-
-# Create test directory on the device
-TEST_DIR=/data/local/tmp/test-google-breakpad-$$
-adb_shell mkdir "$TEST_DIR" ||
-    panic "Can't create test directory on device: $TEST_DIR"
-
-# Ensure that it is always removed when the script exits.
-clean_test_dir () {
-  # Don't care about success/failure, use '$ADB shell' directly.
-  adb_shell rm -r "$TEST_DIR"
-}
-
-atexit clean_test_dir
-
-TEST_PROGRAM_NAME=$(basename "$TEST_PROGRAM")
-TEST_PROGRAM_DIR=$(dirname "$TEST_PROGRAM")
-
-# Handle special case(s) here.
-DATA_FILES=
-case $TEST_PROGRAM_NAME in
-  linux_client_unittest)
-    # linux_client_unittest will call another executable at runtime, ensure
-    # it is installed too.
-    adb_install "$TEST_PROGRAM_DIR/linux_dumper_unittest_helper" "$TEST_DIR"
-    # linux_client_unittest loads a shared library at runtime, ensure it is
-    # installed too.
-    adb_install "$TEST_PROGRAM_DIR/linux_client_unittest_shlib" "$TEST_DIR"
-    ;;
-  basic_source_line_resolver_unittest)
-    DATA_FILES="module1.out \
-                module2.out \
-                module3_bad.out \
-                module4_bad.out"
-    ;;
-  exploitability_unittest)
-    DATA_FILES="scii_read_av.dmp \
-                ascii_read_av_block_write.dmp \
-                ascii_read_av_clobber_write.dmp \
-                ascii_read_av_conditional.dmp \
-                ascii_read_av_non_null.dmp \
-                ascii_read_av_then_jmp.dmp \
-                ascii_read_av_xchg_write.dmp \
-                ascii_write_av.dmp \
-                ascii_write_av_arg_to_call.dmp \
-                exec_av_on_stack.dmp \
-                null_read_av.dmp \
-                null_write_av.dmp \
-                read_av.dmp \
-                null_read_av.dmp \
-                write_av_non_null.dmp"
-    ;;
-  fast_source_line_resolver_unittest)
-    DATA_FILES="module0.out \
-                module1.out \
-                module2.out \
-                module3_bad.out \
-                module4_bad.out"
-    ;;
-  minidump_processor_unittest|minidump_unittest)
-    DATA_FILES="src/processor/testdata/minidump2.dmp"
-    ;;
-esac
-
-# Install the data files, their path is relative to the environment
-# variable 'srcdir'
-for FILE in $DATA_FILES; do
-  FILEDIR=src/processor/testdata/$(dirname "$FILE")
-  adb_shell mkdir -p "$TEST_DIR/$FILEDIR"
-  adb_install "${srcdir:-.}/$FILE" "$TEST_DIR"/"$FILE"
-done
-
-# Copy test program to device
-adb_install "$TEST_PROGRAM" "$TEST_DIR"
-
-# Run it
-adb_shell "cd $TEST_DIR && LD_LIBRARY_PATH=. ./$TEST_PROGRAM_NAME $@"
-
-# Note: exiting here will call cleanup_exit which will remove the temporary
-#       files from the device.