Move aom source to a sub-directory under media/libaom

There is no damned reason to treat this differently than any other media lib given its license and there never was.

1 files changed, 0 insertions, 263 deletions

diff --git a/third_party/aom/av1/encoder/picklpf.c b/third_party/aom/av1/encoder/picklpf.c
deleted file mode 100644
index c5508e25c..000000000
--- a/third_party/aom/av1/encoder/picklpf.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright (c) 2016, Alliance for Open Media. All rights reserved
- *
- * This source code is subject to the terms of the BSD 2 Clause License and
- * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
- * was not distributed with this source code in the LICENSE file, you can
- * obtain it at www.aomedia.org/license/software. If the Alliance for Open
- * Media Patent License 1.0 was not distributed with this source code in the
- * PATENTS file, you can obtain it at www.aomedia.org/license/patent.
- */
-
-#include <assert.h>
-#include <limits.h>
-
-#include "config/aom_scale_rtcd.h"
-
-#include "aom_dsp/aom_dsp_common.h"
-#include "aom_dsp/psnr.h"
-#include "aom_mem/aom_mem.h"
-#include "aom_ports/mem.h"
-
-#include "av1/common/av1_loopfilter.h"
-#include "av1/common/onyxc_int.h"
-#include "av1/common/quant_common.h"
-
-#include "av1/encoder/av1_quantize.h"
-#include "av1/encoder/encoder.h"
-#include "av1/encoder/picklpf.h"
-
-static void yv12_copy_plane(const YV12_BUFFER_CONFIG *src_bc,
-                            YV12_BUFFER_CONFIG *dst_bc, int plane) {
-  switch (plane) {
-    case 0: aom_yv12_copy_y(src_bc, dst_bc); break;
-    case 1: aom_yv12_copy_u(src_bc, dst_bc); break;
-    case 2: aom_yv12_copy_v(src_bc, dst_bc); break;
-    default: assert(plane >= 0 && plane <= 2); break;
-  }
-}
-
-int av1_get_max_filter_level(const AV1_COMP *cpi) {
-  if (cpi->oxcf.pass == 2) {
-    return cpi->twopass.section_intra_rating > 8 ? MAX_LOOP_FILTER * 3 / 4
-                                                 : MAX_LOOP_FILTER;
-  } else {
-    return MAX_LOOP_FILTER;
-  }
-}
-
-static int64_t try_filter_frame(const YV12_BUFFER_CONFIG *sd,
-                                AV1_COMP *const cpi, int filt_level,
-                                int partial_frame, int plane, int dir) {
-  AV1_COMMON *const cm = &cpi->common;
-  int64_t filt_err;
-
-  assert(plane >= 0 && plane <= 2);
-  int filter_level[2] = { filt_level, filt_level };
-  if (plane == 0 && dir == 0) filter_level[1] = cm->lf.filter_level[1];
-  if (plane == 0 && dir == 1) filter_level[0] = cm->lf.filter_level[0];
-
-  // set base filters for use of get_filter_level when in DELTA_Q_LF mode
-  switch (plane) {
-    case 0:
-      cm->lf.filter_level[0] = filter_level[0];
-      cm->lf.filter_level[1] = filter_level[1];
-      break;
-    case 1: cm->lf.filter_level_u = filter_level[0]; break;
-    case 2: cm->lf.filter_level_v = filter_level[0]; break;
-  }
-
-      // TODO(any): please enable multi-thread and remove the flag when loop
-      // filter mask is compatible with multi-thread.
-#if LOOP_FILTER_BITMASK
-  av1_loop_filter_frame(cm->frame_to_show, cm, &cpi->td.mb.e_mbd, 0, plane,
-                        plane + 1, partial_frame);
-#else
-  if (cpi->num_workers > 1)
-    av1_loop_filter_frame_mt(cm->frame_to_show, cm, &cpi->td.mb.e_mbd, plane,
-                             plane + 1, partial_frame, cpi->workers,
-                             cpi->num_workers, &cpi->lf_row_sync);
-  else
-    av1_loop_filter_frame(cm->frame_to_show, cm, &cpi->td.mb.e_mbd, plane,
-                          plane + 1, partial_frame);
-#endif
-
-  filt_err = aom_get_sse_plane(sd, cm->frame_to_show, plane,
-                               cm->seq_params.use_highbitdepth);
-
-  // Re-instate the unfiltered frame
-  yv12_copy_plane(&cpi->last_frame_uf, cm->frame_to_show, plane);
-
-  return filt_err;
-}
-
-static int search_filter_level(const YV12_BUFFER_CONFIG *sd, AV1_COMP *cpi,
-                               int partial_frame,
-                               const int *last_frame_filter_level,
-                               double *best_cost_ret, int plane, int dir) {
-  const AV1_COMMON *const cm = &cpi->common;
-  const int min_filter_level = 0;
-  const int max_filter_level = av1_get_max_filter_level(cpi);
-  int filt_direction = 0;
-  int64_t best_err;
-  int filt_best;
-  MACROBLOCK *x = &cpi->td.mb;
-
-  // Start the search at the previous frame filter level unless it is now out of
-  // range.
-  int lvl;
-  switch (plane) {
-    case 0: lvl = last_frame_filter_level[dir]; break;
-    case 1: lvl = last_frame_filter_level[2]; break;
-    case 2: lvl = last_frame_filter_level[3]; break;
-    default: assert(plane >= 0 && plane <= 2); return 0;
-  }
-  int filt_mid = clamp(lvl, min_filter_level, max_filter_level);
-  int filter_step = filt_mid < 16 ? 4 : filt_mid / 4;
-  // Sum squared error at each filter level
-  int64_t ss_err[MAX_LOOP_FILTER + 1];
-
-  // Set each entry to -1
-  memset(ss_err, 0xFF, sizeof(ss_err));
-  yv12_copy_plane(cm->frame_to_show, &cpi->last_frame_uf, plane);
-  best_err = try_filter_frame(sd, cpi, filt_mid, partial_frame, plane, dir);
-  filt_best = filt_mid;
-  ss_err[filt_mid] = best_err;
-
-  while (filter_step > 0) {
-    const int filt_high = AOMMIN(filt_mid + filter_step, max_filter_level);
-    const int filt_low = AOMMAX(filt_mid - filter_step, min_filter_level);
-
-    // Bias against raising loop filter in favor of lowering it.
-    int64_t bias = (best_err >> (15 - (filt_mid / 8))) * filter_step;
-
-    if ((cpi->oxcf.pass == 2) && (cpi->twopass.section_intra_rating < 20))
-      bias = (bias * cpi->twopass.section_intra_rating) / 20;
-
-    // yx, bias less for large block size
-    if (cm->tx_mode != ONLY_4X4) bias >>= 1;
-
-    if (filt_direction <= 0 && filt_low != filt_mid) {
-      // Get Low filter error score
-      if (ss_err[filt_low] < 0) {
-        ss_err[filt_low] =
-            try_filter_frame(sd, cpi, filt_low, partial_frame, plane, dir);
-      }
-      // If value is close to the best so far then bias towards a lower loop
-      // filter value.
-      if (ss_err[filt_low] < (best_err + bias)) {
-        // Was it actually better than the previous best?
-        if (ss_err[filt_low] < best_err) {
-          best_err = ss_err[filt_low];
-        }
-        filt_best = filt_low;
-      }
-    }
-
-    // Now look at filt_high
-    if (filt_direction >= 0 && filt_high != filt_mid) {
-      if (ss_err[filt_high] < 0) {
-        ss_err[filt_high] =
-            try_filter_frame(sd, cpi, filt_high, partial_frame, plane, dir);
-      }
-      // If value is significantly better than previous best, bias added against
-      // raising filter value
-      if (ss_err[filt_high] < (best_err - bias)) {
-        best_err = ss_err[filt_high];
-        filt_best = filt_high;
-      }
-    }
-
-    // Half the step distance if the best filter value was the same as last time
-    if (filt_best == filt_mid) {
-      filter_step /= 2;
-      filt_direction = 0;
-    } else {
-      filt_direction = (filt_best < filt_mid) ? -1 : 1;
-      filt_mid = filt_best;
-    }
-  }
-
-  // Update best error
-  best_err = ss_err[filt_best];
-
-  if (best_cost_ret) *best_cost_ret = RDCOST_DBL(x->rdmult, 0, best_err);
-  return filt_best;
-}
-
-void av1_pick_filter_level(const YV12_BUFFER_CONFIG *sd, AV1_COMP *cpi,
-                           LPF_PICK_METHOD method) {
-  AV1_COMMON *const cm = &cpi->common;
-  const int num_planes = av1_num_planes(cm);
-  struct loopfilter *const lf = &cm->lf;
-  (void)sd;
-
-  lf->sharpness_level = 0;
-  cpi->td.mb.rdmult = cpi->rd.RDMULT;
-
-  if (method == LPF_PICK_MINIMAL_LPF) {
-    lf->filter_level[0] = 0;
-    lf->filter_level[1] = 0;
-  } else if (method >= LPF_PICK_FROM_Q) {
-    const int min_filter_level = 0;
-    const int max_filter_level = av1_get_max_filter_level(cpi);
-    const int q = av1_ac_quant_Q3(cm->base_qindex, 0, cm->seq_params.bit_depth);
-    // These values were determined by linear fitting the result of the
-    // searched level for 8 bit depth:
-    // Keyframes: filt_guess = q * 0.06699 - 1.60817
-    // Other frames: filt_guess = q * 0.02295 + 2.48225
-    //
-    // And high bit depth separately:
-    // filt_guess = q * 0.316206 + 3.87252
-    int filt_guess;
-    switch (cm->seq_params.bit_depth) {
-      case AOM_BITS_8:
-        filt_guess = (cm->frame_type == KEY_FRAME)
-                         ? ROUND_POWER_OF_TWO(q * 17563 - 421574, 18)
-                         : ROUND_POWER_OF_TWO(q * 6017 + 650707, 18);
-        break;
-      case AOM_BITS_10:
-        filt_guess = ROUND_POWER_OF_TWO(q * 20723 + 4060632, 20);
-        break;
-      case AOM_BITS_12:
-        filt_guess = ROUND_POWER_OF_TWO(q * 20723 + 16242526, 22);
-        break;
-      default:
-        assert(0 &&
-               "bit_depth should be AOM_BITS_8, AOM_BITS_10 "
-               "or AOM_BITS_12");
-        return;
-    }
-    if (cm->seq_params.bit_depth != AOM_BITS_8 && cm->frame_type == KEY_FRAME)
-      filt_guess -= 4;
-    // TODO(chengchen): retrain the model for Y, U, V filter levels
-    lf->filter_level[0] = clamp(filt_guess, min_filter_level, max_filter_level);
-    lf->filter_level[1] = clamp(filt_guess, min_filter_level, max_filter_level);
-    lf->filter_level_u = clamp(filt_guess, min_filter_level, max_filter_level);
-    lf->filter_level_v = clamp(filt_guess, min_filter_level, max_filter_level);
-  } else {
-    const int last_frame_filter_level[4] = { lf->filter_level[0],
-                                             lf->filter_level[1],
-                                             lf->filter_level_u,
-                                             lf->filter_level_v };
-
-    lf->filter_level[0] = lf->filter_level[1] =
-        search_filter_level(sd, cpi, method == LPF_PICK_FROM_SUBIMAGE,
-                            last_frame_filter_level, NULL, 0, 2);
-    lf->filter_level[0] =
-        search_filter_level(sd, cpi, method == LPF_PICK_FROM_SUBIMAGE,
-                            last_frame_filter_level, NULL, 0, 0);
-    lf->filter_level[1] =
-        search_filter_level(sd, cpi, method == LPF_PICK_FROM_SUBIMAGE,
-                            last_frame_filter_level, NULL, 0, 1);
-
-    if (num_planes > 1) {
-      lf->filter_level_u =
-          search_filter_level(sd, cpi, method == LPF_PICK_FROM_SUBIMAGE,
-                              last_frame_filter_level, NULL, 1, 0);
-      lf->filter_level_v =
-          search_filter_level(sd, cpi, method == LPF_PICK_FROM_SUBIMAGE,
-                              last_frame_filter_level, NULL, 2, 0);
-    }
-  }
-}