Add m-esr52 at 52.6.0

1 files changed, 243 insertions, 0 deletions

diff --git a/security/nss/lib/freebl/mpi/mpi-priv.h b/security/nss/lib/freebl/mpi/mpi-priv.h
new file mode 100644
index 000000000..b34452c48
--- /dev/null
+++ b/security/nss/lib/freebl/mpi/mpi-priv.h
@@ -0,0 +1,243 @@
+/*
+ *  mpi-priv.h  - Private header file for MPI
+ *  Arbitrary precision integer arithmetic library
+ *
+ *  NOTE WELL: the content of this header file is NOT part of the "public"
+ *  API for the MPI library, and may change at any time.
+ *  Application programs that use libmpi should NOT include this header file.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+#ifndef _MPI_PRIV_H_
+#define _MPI_PRIV_H_ 1
+
+#include "mpi.h"
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+
+#if MP_DEBUG
+#include <stdio.h>
+
+#define DIAG(T, V)           \
+    {                        \
+        fprintf(stderr, T);  \
+        mp_print(V, stderr); \
+        fputc('\n', stderr); \
+    }
+#else
+#define DIAG(T, V)
+#endif
+
+/* If we aren't using a wired-in logarithm table, we need to include
+   the math library to get the log() function
+ */
+
+/* {{{ s_logv_2[] - log table for 2 in various bases */
+
+#if MP_LOGTAB
+/*
+  A table of the logs of 2 for various bases (the 0 and 1 entries of
+  this table are meaningless and should not be referenced).
+
+  This table is used to compute output lengths for the mp_toradix()
+  function.  Since a number n in radix r takes up about log_r(n)
+  digits, we estimate the output size by taking the least integer
+  greater than log_r(n), where:
+
+  log_r(n) = log_2(n) * log_r(2)
+
+  This table, therefore, is a table of log_r(2) for 2 <= r <= 36,
+  which are the output bases supported.
+ */
+
+extern const float s_logv_2[];
+#define LOG_V_2(R) s_logv_2[(R)]
+
+#else
+
+/*
+   If MP_LOGTAB is not defined, use the math library to compute the
+   logarithms on the fly.  Otherwise, use the table.
+   Pick which works best for your system.
+ */
+
+#include <math.h>
+#define LOG_V_2(R) (log(2.0) / log(R))
+
+#endif /* if MP_LOGTAB */
+
+/* }}} */
+
+/* {{{ Digit arithmetic macros */
+
+/*
+  When adding and multiplying digits, the results can be larger than
+  can be contained in an mp_digit.  Thus, an mp_word is used.  These
+  macros mask off the upper and lower digits of the mp_word (the
+  mp_word may be more than 2 mp_digits wide, but we only concern
+  ourselves with the low-order 2 mp_digits)
+ */
+
+#define CARRYOUT(W) (mp_digit)((W) >> DIGIT_BIT)
+#define ACCUM(W) (mp_digit)(W)
+
+#define MP_MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define MP_MAX(a, b) (((a) > (b)) ? (a) : (b))
+#define MP_HOWMANY(a, b) (((a) + (b)-1) / (b))
+#define MP_ROUNDUP(a, b) (MP_HOWMANY(a, b) * (b))
+
+/* }}} */
+
+/* {{{ Comparison constants */
+
+#define MP_LT -1
+#define MP_EQ 0
+#define MP_GT 1
+
+/* }}} */
+
+/* {{{ private function declarations */
+
+void s_mp_setz(mp_digit *dp, mp_size count);                     /* zero digits           */
+void s_mp_copy(const mp_digit *sp, mp_digit *dp, mp_size count); /* copy */
+void *s_mp_alloc(size_t nb, size_t ni);                          /* general allocator     */
+void s_mp_free(void *ptr);                                       /* general free function */
+
+mp_err s_mp_grow(mp_int *mp, mp_size min); /* increase allocated size */
+mp_err s_mp_pad(mp_int *mp, mp_size min);  /* left pad with zeroes    */
+
+void s_mp_clamp(mp_int *mp); /* clip leading zeroes     */
+
+void s_mp_exch(mp_int *a, mp_int *b); /* swap a and b in place   */
+
+mp_err s_mp_lshd(mp_int *mp, mp_size p);    /* left-shift by p digits  */
+void s_mp_rshd(mp_int *mp, mp_size p);      /* right-shift by p digits */
+mp_err s_mp_mul_2d(mp_int *mp, mp_digit d); /* multiply by 2^d in place */
+void s_mp_div_2d(mp_int *mp, mp_digit d);   /* divide by 2^d in place  */
+void s_mp_mod_2d(mp_int *mp, mp_digit d);   /* modulo 2^d in place     */
+void s_mp_div_2(mp_int *mp);                /* divide by 2 in place    */
+mp_err s_mp_mul_2(mp_int *mp);              /* multiply by 2 in place  */
+mp_err s_mp_norm(mp_int *a, mp_int *b, mp_digit *pd);
+/* normalize for division  */
+mp_err s_mp_add_d(mp_int *mp, mp_digit d); /* unsigned digit addition */
+mp_err s_mp_sub_d(mp_int *mp, mp_digit d); /* unsigned digit subtract */
+mp_err s_mp_mul_d(mp_int *mp, mp_digit d); /* unsigned digit multiply */
+mp_err s_mp_div_d(mp_int *mp, mp_digit d, mp_digit *r);
+/* unsigned digit divide   */
+mp_err s_mp_reduce(mp_int *x, const mp_int *m, const mp_int *mu);
+/* Barrett reduction       */
+mp_err s_mp_add(mp_int *a, const mp_int *b); /* magnitude addition      */
+mp_err s_mp_add_3arg(const mp_int *a, const mp_int *b, mp_int *c);
+mp_err s_mp_sub(mp_int *a, const mp_int *b); /* magnitude subtract      */
+mp_err s_mp_sub_3arg(const mp_int *a, const mp_int *b, mp_int *c);
+mp_err s_mp_add_offset(mp_int *a, mp_int *b, mp_size offset);
+/* a += b * RADIX^offset   */
+mp_err s_mp_mul(mp_int *a, const mp_int *b); /* magnitude multiply      */
+#if MP_SQUARE
+mp_err s_mp_sqr(mp_int *a); /* magnitude square        */
+#else
+#define s_mp_sqr(a) s_mp_mul(a, a)
+#endif
+mp_err s_mp_div(mp_int *rem, mp_int *div, mp_int *quot); /* magnitude div */
+mp_err s_mp_exptmod(const mp_int *a, const mp_int *b, const mp_int *m, mp_int *c);
+mp_err s_mp_2expt(mp_int *a, mp_digit k);       /* a = 2^k                 */
+int s_mp_cmp(const mp_int *a, const mp_int *b); /* magnitude comparison */
+int s_mp_cmp_d(const mp_int *a, mp_digit d);    /* magnitude digit compare */
+int s_mp_ispow2(const mp_int *v);               /* is v a power of 2?      */
+int s_mp_ispow2d(mp_digit d);                   /* is d a power of 2?      */
+
+int s_mp_tovalue(char ch, int r);                /* convert ch to value    */
+char s_mp_todigit(mp_digit val, int r, int low); /* convert val to digit */
+int s_mp_outlen(int bits, int r);                /* output length in bytes */
+mp_digit s_mp_invmod_radix(mp_digit P);          /* returns (P ** -1) mod RADIX */
+mp_err s_mp_invmod_odd_m(const mp_int *a, const mp_int *m, mp_int *c);
+mp_err s_mp_invmod_2d(const mp_int *a, mp_size k, mp_int *c);
+mp_err s_mp_invmod_even_m(const mp_int *a, const mp_int *m, mp_int *c);
+
+#ifdef NSS_USE_COMBA
+
+#define IS_POWER_OF_2(a) ((a) && !((a) & ((a)-1)))
+
+void s_mp_mul_comba_4(const mp_int *A, const mp_int *B, mp_int *C);
+void s_mp_mul_comba_8(const mp_int *A, const mp_int *B, mp_int *C);
+void s_mp_mul_comba_16(const mp_int *A, const mp_int *B, mp_int *C);
+void s_mp_mul_comba_32(const mp_int *A, const mp_int *B, mp_int *C);
+
+void s_mp_sqr_comba_4(const mp_int *A, mp_int *B);
+void s_mp_sqr_comba_8(const mp_int *A, mp_int *B);
+void s_mp_sqr_comba_16(const mp_int *A, mp_int *B);
+void s_mp_sqr_comba_32(const mp_int *A, mp_int *B);
+
+#endif /* end NSS_USE_COMBA */
+
+/* ------ mpv functions, operate on arrays of digits, not on mp_int's ------ */
+#if defined(__OS2__) && defined(__IBMC__)
+#define MPI_ASM_DECL __cdecl
+#else
+#define MPI_ASM_DECL
+#endif
+
+#ifdef MPI_AMD64
+
+mp_digit MPI_ASM_DECL s_mpv_mul_set_vec64(mp_digit *, mp_digit *, mp_size, mp_digit);
+mp_digit MPI_ASM_DECL s_mpv_mul_add_vec64(mp_digit *, const mp_digit *, mp_size, mp_digit);
+
+/* c = a * b */
+#define s_mpv_mul_d(a, a_len, b, c) \
+    ((mp_digit *)c)[a_len] = s_mpv_mul_set_vec64(c, a, a_len, b)
+
+/* c += a * b */
+#define s_mpv_mul_d_add(a, a_len, b, c) \
+    ((mp_digit *)c)[a_len] = s_mpv_mul_add_vec64(c, a, a_len, b)
+
+#else
+
+void MPI_ASM_DECL s_mpv_mul_d(const mp_digit *a, mp_size a_len,
+                              mp_digit b, mp_digit *c);
+void MPI_ASM_DECL s_mpv_mul_d_add(const mp_digit *a, mp_size a_len,
+                                  mp_digit b, mp_digit *c);
+
+#endif
+
+void MPI_ASM_DECL s_mpv_mul_d_add_prop(const mp_digit *a,
+                                       mp_size a_len, mp_digit b,
+                                       mp_digit *c);
+void MPI_ASM_DECL s_mpv_sqr_add_prop(const mp_digit *a,
+                                     mp_size a_len,
+                                     mp_digit *sqrs);
+
+mp_err MPI_ASM_DECL s_mpv_div_2dx1d(mp_digit Nhi, mp_digit Nlo,
+                                    mp_digit divisor, mp_digit *quot, mp_digit *rem);
+
+/* c += a * b * (MP_RADIX ** offset);  */
+/* Callers of this macro should be aware that the return type might vary;
+ * it should be treated as a void function. */
+#define s_mp_mul_d_add_offset(a, b, c, off) \
+    s_mpv_mul_d_add_prop(MP_DIGITS(a), MP_USED(a), b, MP_DIGITS(c) + off)
+
+typedef struct {
+    mp_int N;         /* modulus N */
+    mp_digit n0prime; /* n0' = - (n0 ** -1) mod MP_RADIX */
+} mp_mont_modulus;
+
+mp_err s_mp_mul_mont(const mp_int *a, const mp_int *b, mp_int *c,
+                     mp_mont_modulus *mmm);
+mp_err s_mp_redc(mp_int *T, mp_mont_modulus *mmm);
+
+/*
+ * s_mpi_getProcessorLineSize() returns the size in bytes of the cache line
+ * if a cache exists, or zero if there is no cache. If more than one
+ * cache line exists, it should return the smallest line size (which is
+ * usually the L1 cache).
+ *
+ * mp_modexp uses this information to make sure that private key information
+ * isn't being leaked through the cache.
+ *
+ * see mpcpucache.c for the implementation.
+ */
+unsigned long s_mpi_getProcessorLineSize();
+
+/* }}} */
+#endif