1 files changed, 0 insertions, 220 deletions
diff --git a/depends/lzma/pavlov/LzmaDec.h b/depends/lzma/pavlov/LzmaDec.h
deleted file mode 100755
index 25cb7e94..00000000
--- a/depends/lzma/pavlov/LzmaDec.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/* LzmaDec.h -- LZMA Decoder
-2008-10-04 : Igor Pavlov : Public domain */
-
-#pragma once
-
-#include "Types.h"
-
-/* #define _LZMA_PROB32 */
-/* _LZMA_PROB32 can increase the speed on some CPUs,
-   but memory usage for CLzmaDec::probs will be doubled in that case */
-
-#ifdef _LZMA_PROB32
-#define CLzmaProb UInt32
-#else
-#define CLzmaProb uint16_t
-#endif
-
-/* ---------- LZMA Properties ---------- */
-
-#define LZMA_PROPS_SIZE 5
-
-typedef struct _CLzmaProps
-{
-	unsigned lc, lp, pb;
-	uint32_t dicSize;
-} CLzmaProps;
-
-/* LzmaProps_Decode - decodes properties
-Returns:
-  SZ_OK
-  SZ_ERROR_UNSUPPORTED - Unsupported properties
-*/
-
-SRes LzmaProps_Decode(CLzmaProps *p, const uint8_t *data, unsigned size);
-
-/* ---------- LZMA Decoder state ---------- */
-
-/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
-   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
-
-#define LZMA_REQUIRED_INPUT_MAX 20
-
-typedef struct
-{
-	CLzmaProps prop;
-	CLzmaProb *probs;
-	uint8_t *dic;
-	const uint8_t *buf;
-	uint32_t range, code;
-	size_t dicPos;
-	size_t dicBufSize;
-	uint32_t processedPos;
-	uint32_t checkDicSize;
-	unsigned state;
-	uint32_t reps[4];
-	unsigned remainLen;
-	int needFlush;
-	int needInitState;
-	uint32_t numProbs;
-	unsigned tempBufSize;
-	uint8_t tempBuf[LZMA_REQUIRED_INPUT_MAX];
-} CLzmaDec;
-
-#define LzmaDec_Construct(p)                                                                   \
-	{                                                                                          \
-		(p)->dic = 0;                                                                          \
-		(p)->probs = 0;                                                                        \
-	}
-
-void LzmaDec_Init(CLzmaDec *p);
-
-/* There are two types of LZMA streams:
-	 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-	 1) Stream without end mark. You must know exact uncompressed size to decompress such
-   stream. */
-
-typedef enum
-{
-	LZMA_FINISH_ANY, /* finish at any point */
-	LZMA_FINISH_END  /* block must be finished at the end */
-} ELzmaFinishMode;
-
-/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
-
-   You must use LZMA_FINISH_END, when you know that current output buffer
-   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
-
-   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
-   and output value of destLen will be less than output buffer size limit.
-   You can check status result also.
-
-   You can use multiple checks to test data integrity after full decompression:
-	 1) Check Result and "status" variable.
-	 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
-	 3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
-		You must use correct finish mode in that case. */
-
-typedef enum
-{
-	LZMA_STATUS_NOT_SPECIFIED,			  /* use main error code instead */
-	LZMA_STATUS_FINISHED_WITH_MARK,		 /* stream was finished with end mark. */
-	LZMA_STATUS_NOT_FINISHED,			   /* stream was not finished */
-	LZMA_STATUS_NEEDS_MORE_INPUT,		   /* you must provide more input bytes */
-	LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished
-											   without end mark */
-} ELzmaStatus;
-
-/* ELzmaStatus is used only as output value for function call */
-
-/* ---------- Interfaces ---------- */
-
-/* There are 3 levels of interfaces:
-	 1) Dictionary Interface
-	 2) Buffer Interface
-	 3) One Call Interface
-   You can select any of these interfaces, but don't mix functions from different
-   groups for same object. */
-
-/* There are two variants to allocate state for Dictionary Interface:
-	 1) LzmaDec_Allocate / LzmaDec_Free
-	 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
-   You can use variant 2, if you set dictionary buffer manually.
-   For Buffer Interface you must always use variant 1.
-
-LzmaDec_Allocate* can return:
-  SZ_OK
-  SZ_ERROR_MEM         - Memory allocation error
-  SZ_ERROR_UNSUPPORTED - Unsupported properties
-*/
-
-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const uint8_t *props, unsigned propsSize);
-void LzmaDec_FreeProbs(CLzmaDec *p);
-
-SRes LzmaDec_Allocate(CLzmaDec *state, const uint8_t *prop, unsigned propsSize);
-void LzmaDec_Free(CLzmaDec *state);
-
-/* ---------- Dictionary Interface ---------- */
-
-/* You can use it, if you want to eliminate the overhead for data copying from
-   dictionary to some other external buffer.
-   You must work with CLzmaDec variables directly in this interface.
-
-   STEPS:
-	 LzmaDec_Constr()
-	 LzmaDec_Allocate()
-	 for (each new stream)
-	 {
-	   LzmaDec_Init()
-	   while (it needs more decompression)
-	   {
-		 LzmaDec_DecodeToDic()
-		 use data from CLzmaDec::dic and update CLzmaDec::dicPos
-	   }
-	 }
-	 LzmaDec_Free()
-*/
-
-/* LzmaDec_DecodeToDic
-
-   The decoding to internal dictionary buffer (CLzmaDec::dic).
-   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
-
-finishMode:
-  It has meaning only if the decoding reaches output limit (dicLimit).
-  LZMA_FINISH_ANY - Decode just dicLimit bytes.
-  LZMA_FINISH_END - Stream must be finished after dicLimit.
-
-Returns:
-  SZ_OK
-	status:
-	  LZMA_STATUS_FINISHED_WITH_MARK
-	  LZMA_STATUS_NOT_FINISHED
-	  LZMA_STATUS_NEEDS_MORE_INPUT
-	  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-  SZ_ERROR_DATA - Data error
-*/
-
-SRes LzmaDec_DecodeToDic(CLzmaDec *p, size_t dicLimit, const uint8_t *src, size_t *srcLen,
-						 ELzmaFinishMode finishMode, ELzmaStatus *status);
-
-/* ---------- Buffer Interface ---------- */
-
-/* It's zlib-like interface.
-   See LzmaDec_DecodeToDic description for information about STEPS and return results,
-   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
-   to work with CLzmaDec variables manually.
-
-finishMode:
-  It has meaning only if the decoding reaches output limit (*destLen).
-  LZMA_FINISH_ANY - Decode just destLen bytes.
-  LZMA_FINISH_END - Stream must be finished after (*destLen).
-*/
-
-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, uint8_t *dest, size_t *destLen, const uint8_t *src,
-						 size_t *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-
-/* ---------- One Call Interface ---------- */
-
-/* LzmaDecode
-
-finishMode:
-  It has meaning only if the decoding reaches output limit (*destLen).
-  LZMA_FINISH_ANY - Decode just destLen bytes.
-  LZMA_FINISH_END - Stream must be finished after (*destLen).
-
-Returns:
-  SZ_OK
-	status:
-	  LZMA_STATUS_FINISHED_WITH_MARK
-	  LZMA_STATUS_NOT_FINISHED
-	  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-  SZ_ERROR_DATA - Data error
-  SZ_ERROR_MEM  - Memory allocation error
-  SZ_ERROR_UNSUPPORTED - Unsupported properties
-  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
-*/
-
-SRes LzmaDecode(uint8_t *dest, size_t *destLen, const uint8_t *src, size_t *srcLen,
-				const uint8_t *propData, unsigned propSize, ELzmaFinishMode finishMode,
-				ELzmaStatus *status);