/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* vim: set ts=8 sts=2 et sw=2 tw=80: */ // Copyright (c) 2011 The Chromium Authors. All rights reserved. // Use of this source code is governed by a BSD-style license that can be // found in the LICENSE file. // Histogram is an object that aggregates statistics, and can summarize them in // various forms, including ASCII graphical, HTML, and numerically (as a // vector of numbers corresponding to each of the aggregating buckets). // It supports calls to accumulate either time intervals (which are processed // as integral number of milliseconds), or arbitrary integral units. // The default layout of buckets is exponential. For example, buckets might // contain (sequentially) the count of values in the following intervals: // [0,1), [1,2), [2,4), [4,8), [8,16), [16,32), [32,64), [64,infinity) // That bucket allocation would actually result from construction of a histogram // for values between 1 and 64, with 8 buckets, such as: // Histogram count(L"some name", 1, 64, 8); // Note that the underflow bucket [0,1) and the overflow bucket [64,infinity) // are not counted by the constructor in the user supplied "bucket_count" // argument. // The above example has an exponential ratio of 2 (doubling the bucket width // in each consecutive bucket. The Histogram class automatically calculates // the smallest ratio that it can use to construct the number of buckets // selected in the constructor. An another example, if you had 50 buckets, // and millisecond time values from 1 to 10000, then the ratio between // consecutive bucket widths will be approximately somewhere around the 50th // root of 10000. This approach provides very fine grain (narrow) buckets // at the low end of the histogram scale, but allows the histogram to cover a // gigantic range with the addition of very few buckets. // Histograms use a pattern involving a function static variable, that is a // pointer to a histogram. This static is explicitly initialized on any thread // that detects a uninitialized (NULL) pointer. The potentially racy // initialization is not a problem as it is always set to point to the same // value (i.e., the FactoryGet always returns the same value). FactoryGet // is also completely thread safe, which results in a completely thread safe, // and relatively fast, set of counters. To avoid races at shutdown, the static // pointer is NOT deleted, and we leak the histograms at process termination. #ifndef BASE_METRICS_HISTOGRAM_H_ #define BASE_METRICS_HISTOGRAM_H_ #pragma once #include "mozilla/Atomics.h" #include "mozilla/MemoryReporting.h" #include #include #include #include "base/time.h" #include "base/lock.h" namespace base { //------------------------------------------------------------------------------ // Provide easy general purpose histogram in a macro, just like stats counters. // The first four macros use 50 buckets. #define HISTOGRAM_TIMES(name, sample) HISTOGRAM_CUSTOM_TIMES( \ name, sample, base::TimeDelta::FromMilliseconds(1), \ base::TimeDelta::FromSeconds(10), 50) #define HISTOGRAM_COUNTS(name, sample) HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 1000000, 50) #define HISTOGRAM_COUNTS_100(name, sample) HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 100, 50) #define HISTOGRAM_COUNTS_10000(name, sample) HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 10000, 50) #define HISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::Histogram::FactoryGet(name, min, max, bucket_count, \ base::Histogram::kNoFlags); \ DCHECK_EQ(name, counter->histogram_name()); \ counter->Add(sample); \ } while (0) #define HISTOGRAM_PERCENTAGE(name, under_one_hundred) \ HISTOGRAM_ENUMERATION(name, under_one_hundred, 101) // For folks that need real specific times, use this to select a precise range // of times you want plotted, and the number of buckets you want used. #define HISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::Histogram::FactoryTimeGet(name, min, max, bucket_count, \ base::Histogram::kNoFlags); \ DCHECK_EQ(name, counter->histogram_name()); \ counter->AddTime(sample); \ } while (0) // DO NOT USE THIS. It is being phased out, in favor of HISTOGRAM_CUSTOM_TIMES. #define HISTOGRAM_CLIPPED_TIMES(name, sample, min, max, bucket_count) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::Histogram::FactoryTimeGet(name, min, max, bucket_count, \ base::Histogram::kNoFlags); \ DCHECK_EQ(name, counter->histogram_name()); \ if ((sample) < (max)) counter->AddTime(sample); \ } while (0) // Support histograming of an enumerated value. The samples should always be // less than boundary_value. #define HISTOGRAM_ENUMERATION(name, sample, boundary_value) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::LinearHistogram::FactoryGet(name, 1, boundary_value, \ boundary_value + 1, base::Histogram::kNoFlags); \ DCHECK_EQ(name, counter->histogram_name()); \ counter->Add(sample); \ } while (0) #define HISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::CustomHistogram::FactoryGet(name, custom_ranges, \ base::Histogram::kNoFlags); \ DCHECK_EQ(name, counter->histogram_name()); \ counter->Add(sample); \ } while (0) //------------------------------------------------------------------------------ // Define Debug vs non-debug flavors of macros. #ifndef NDEBUG #define DHISTOGRAM_TIMES(name, sample) HISTOGRAM_TIMES(name, sample) #define DHISTOGRAM_COUNTS(name, sample) HISTOGRAM_COUNTS(name, sample) #define DHISTOGRAM_PERCENTAGE(name, under_one_hundred) HISTOGRAM_PERCENTAGE(\ name, under_one_hundred) #define DHISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) \ HISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) #define DHISTOGRAM_CLIPPED_TIMES(name, sample, min, max, bucket_count) \ HISTOGRAM_CLIPPED_TIMES(name, sample, min, max, bucket_count) #define DHISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) \ HISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) #define DHISTOGRAM_ENUMERATION(name, sample, boundary_value) \ HISTOGRAM_ENUMERATION(name, sample, boundary_value) #define DHISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) \ HISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) #else // NDEBUG #define DHISTOGRAM_TIMES(name, sample) do {} while (0) #define DHISTOGRAM_COUNTS(name, sample) do {} while (0) #define DHISTOGRAM_PERCENTAGE(name, under_one_hundred) do {} while (0) #define DHISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) \ do {} while (0) #define DHISTOGRAM_CLIPPED_TIMES(name, sample, min, max, bucket_count) \ do {} while (0) #define DHISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) \ do {} while (0) #define DHISTOGRAM_ENUMERATION(name, sample, boundary_value) do {} while (0) #define DHISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) \ do {} while (0) #endif // NDEBUG //------------------------------------------------------------------------------ // The following macros provide typical usage scenarios for callers that wish // to record histogram data, and have the data submitted/uploaded via UMA. // Not all systems support such UMA, but if they do, the following macros // should work with the service. #define UMA_HISTOGRAM_TIMES(name, sample) UMA_HISTOGRAM_CUSTOM_TIMES( \ name, sample, base::TimeDelta::FromMilliseconds(1), \ base::TimeDelta::FromSeconds(10), 50) #define UMA_HISTOGRAM_MEDIUM_TIMES(name, sample) UMA_HISTOGRAM_CUSTOM_TIMES( \ name, sample, base::TimeDelta::FromMilliseconds(10), \ base::TimeDelta::FromMinutes(3), 50) // Use this macro when times can routinely be much longer than 10 seconds. #define UMA_HISTOGRAM_LONG_TIMES(name, sample) UMA_HISTOGRAM_CUSTOM_TIMES( \ name, sample, base::TimeDelta::FromMilliseconds(1), \ base::TimeDelta::FromHours(1), 50) #define UMA_HISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::Histogram::FactoryTimeGet(name, min, max, bucket_count, \ base::Histogram::kUmaTargetedHistogramFlag); \ DCHECK_EQ(name, counter->histogram_name()); \ counter->AddTime(sample); \ } while (0) // DO NOT USE THIS. It is being phased out, in favor of HISTOGRAM_CUSTOM_TIMES. #define UMA_HISTOGRAM_CLIPPED_TIMES(name, sample, min, max, bucket_count) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::Histogram::FactoryTimeGet(name, min, max, bucket_count, \ base::Histogram::kUmaTargetedHistogramFlag); \ DCHECK_EQ(name, counter->histogram_name()); \ if ((sample) < (max)) counter->AddTime(sample); \ } while (0) #define UMA_HISTOGRAM_COUNTS(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 1000000, 50) #define UMA_HISTOGRAM_COUNTS_100(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 100, 50) #define UMA_HISTOGRAM_COUNTS_10000(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 10000, 50) #define UMA_HISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::Histogram::FactoryGet(name, min, max, bucket_count, \ base::Histogram::kUmaTargetedHistogramFlag); \ DCHECK_EQ(name, counter->histogram_name()); \ counter->Add(sample); \ } while (0) #define UMA_HISTOGRAM_MEMORY_KB(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1000, 500000, 50) #define UMA_HISTOGRAM_MEMORY_MB(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 1000, 50) #define UMA_HISTOGRAM_PERCENTAGE(name, under_one_hundred) \ UMA_HISTOGRAM_ENUMERATION(name, under_one_hundred, 101) #define UMA_HISTOGRAM_BOOLEAN(name, sample) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::BooleanHistogram::FactoryGet(name, \ base::Histogram::kUmaTargetedHistogramFlag); \ DCHECK_EQ(name, counter->histogram_name()); \ counter->AddBoolean(sample); \ } while (0) #define UMA_HISTOGRAM_ENUMERATION(name, sample, boundary_value) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::LinearHistogram::FactoryGet(name, 1, boundary_value, \ boundary_value + 1, base::Histogram::kUmaTargetedHistogramFlag); \ DCHECK_EQ(name, counter->histogram_name()); \ counter->Add(sample); \ } while (0) #define UMA_HISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) do { \ static base::Histogram* counter(NULL); \ if (!counter) \ counter = base::CustomHistogram::FactoryGet(name, custom_ranges, \ base::Histogram::kUmaTargetedHistogramFlag); \ DCHECK_EQ(name, counter->histogram_name()); \ counter->Add(sample); \ } while (0) //------------------------------------------------------------------------------ class BooleanHistogram; class CustomHistogram; class Histogram; class LinearHistogram; class Histogram { public: typedef int Sample; // Used for samples (and ranges of samples). typedef int Count; // Used to count samples in a bucket. static const Sample kSampleType_MAX = INT_MAX; // Initialize maximum number of buckets in histograms as 16,384. static const size_t kBucketCount_MAX; typedef std::vector Counts; typedef std::vector Ranges; // These enums are used to facilitate deserialization of renderer histograms // into the browser. enum ClassType { HISTOGRAM, LINEAR_HISTOGRAM, BOOLEAN_HISTOGRAM, FLAG_HISTOGRAM, COUNT_HISTOGRAM, CUSTOM_HISTOGRAM, NOT_VALID_IN_RENDERER }; enum BucketLayout { EXPONENTIAL, LINEAR, CUSTOM }; enum Flags { kNoFlags = 0, kUmaTargetedHistogramFlag = 0x1, // Histogram should be UMA uploaded. kHexRangePrintingFlag = 0x8000 // Fancy bucket-naming supported. }; enum Inconsistencies { NO_INCONSISTENCIES = 0x0, RANGE_CHECKSUM_ERROR = 0x1, BUCKET_ORDER_ERROR = 0x2, COUNT_HIGH_ERROR = 0x4, COUNT_LOW_ERROR = 0x8, NEVER_EXCEEDED_VALUE = 0x10 }; struct DescriptionPair { Sample sample; const char* description; // Null means end of a list of pairs. }; size_t SizeOfIncludingThis(mozilla::MallocSizeOf aMallocSizeOf); //---------------------------------------------------------------------------- // Statistic values, developed over the life of the histogram. class SampleSet { public: explicit SampleSet(); ~SampleSet(); // None of the methods in this class are thread-safe. Callers // must deal with locking themselves. // Adjust size of counts_ for use with given histogram. void Resize(const Histogram& histogram); // Accessor for histogram to make routine additions. void Accumulate(Sample value, Count count, size_t index); // Arithmetic manipulation of corresponding elements of the set. void Add(const SampleSet& other); size_t SizeOfExcludingThis(mozilla::MallocSizeOf aMallocSizeOf); Count counts(size_t i) const { return counts_[i]; } Count TotalCount() const; int64_t sum() const { return sum_; } int64_t redundant_count() const { return redundant_count_; } size_t size() const { return counts_.size(); } protected: // Actual histogram data is stored in buckets, showing the count of values // that fit into each bucket. Counts counts_; // Save simple stats locally. Note that this MIGHT get done in base class // without shared memory at some point. int64_t sum_; // sum of samples. // To help identify memory corruption, we reduntantly save the number of // samples we've accumulated into all of our buckets. We can compare this // count to the sum of the counts in all buckets, and detect problems. Note // that due to races in histogram accumulation (if a histogram is indeed // updated on several threads simultaneously), the tallies might mismatch, // and also the snapshotting code may asynchronously get a mismatch (though // generally either race based mismatch cause is VERY rare). int64_t redundant_count_; }; //---------------------------------------------------------------------------- // minimum should start from 1. 0 is invalid as a minimum. 0 is an implicit // default underflow bucket. static Histogram* FactoryGet(const std::string& name, Sample minimum, Sample maximum, size_t bucket_count, Flags flags); static Histogram* FactoryTimeGet(const std::string& name, base::TimeDelta minimum, base::TimeDelta maximum, size_t bucket_count, Flags flags); void Add(int value); void Subtract(int value); // TODO: Currently recording_enabled_ is not used by any Histogram class, but // rather examined only by the telemetry code (via IsRecordingEnabled). // Move handling to Histogram's Add() etc after simplifying Histogram. void SetRecordingEnabled(bool aEnabled) { recording_enabled_ = aEnabled; }; bool IsRecordingEnabled() const { return recording_enabled_; }; // This method is an interface, used only by BooleanHistogram. virtual void AddBoolean(bool value); // Accept a TimeDelta to increment. void AddTime(TimeDelta time) { Add(static_cast(time.InMilliseconds())); } virtual void AddSampleSet(const SampleSet& sample); virtual void Clear(); // This method is an interface, used only by LinearHistogram. virtual void SetRangeDescriptions(const DescriptionPair descriptions[]); // The following methods provide graphical histogram displays. void WriteHTMLGraph(std::string* output) const; void WriteAscii(bool graph_it, const std::string& newline, std::string* output) const; // Support generic flagging of Histograms. // 0x1 Currently used to mark this histogram to be recorded by UMA.. // 0x8000 means print ranges in hex. void SetFlags(Flags flags) { flags_ = static_cast (flags_ | flags); } void ClearFlags(Flags flags) { flags_ = static_cast(flags_ & ~flags); } int flags() const { return flags_; } // Check to see if bucket ranges, counts and tallies in the snapshot are // consistent with the bucket ranges and checksums in our histogram. This can // produce a false-alarm if a race occurred in the reading of the data during // a SnapShot process, but should otherwise be false at all times (unless we // have memory over-writes, or DRAM failures). virtual Inconsistencies FindCorruption(const SampleSet& snapshot) const; //---------------------------------------------------------------------------- // Accessors for factory constuction, serialization and testing. //---------------------------------------------------------------------------- virtual ClassType histogram_type() const; const std::string& histogram_name() const { return histogram_name_; } Sample declared_min() const { return declared_min_; } Sample declared_max() const { return declared_max_; } virtual Sample ranges(size_t i) const; uint32_t range_checksum() const { return range_checksum_; } virtual size_t bucket_count() const; // Do a safe atomic snapshot of sample data. The caller is assumed to // have exclusive access to the destination, |*sample|, and no locking // of it is done here. virtual void SnapshotSample(SampleSet* sample) const; virtual bool HasConstructorArguments(Sample minimum, Sample maximum, size_t bucket_count); virtual bool HasConstructorTimeDeltaArguments(TimeDelta minimum, TimeDelta maximum, size_t bucket_count); // Return true iff the range_checksum_ matches current ranges_ vector. bool HasValidRangeChecksum() const; protected: Histogram(const std::string& name, Sample minimum, Sample maximum, size_t bucket_count); Histogram(const std::string& name, TimeDelta minimum, TimeDelta maximum, size_t bucket_count); virtual ~Histogram(); // Initialize ranges_ mapping. void InitializeBucketRange(); // Method to override to skip the display of the i'th bucket if it's empty. virtual bool PrintEmptyBucket(size_t index) const; //---------------------------------------------------------------------------- // Methods to override to create histogram with different bucket widths. //---------------------------------------------------------------------------- // Find bucket to increment for sample value. virtual size_t BucketIndex(Sample value) const; // Get normalized size, relative to the ranges_[i]. virtual double GetBucketSize(Count current, size_t i) const; // Recalculate range_checksum_. void ResetRangeChecksum(); // Return a string description of what goes in a given bucket. // Most commonly this is the numeric value, but in derived classes it may // be a name (or string description) given to the bucket. virtual const std::string GetAsciiBucketRange(size_t it) const; //---------------------------------------------------------------------------- // Methods to override to create thread safe histogram. //---------------------------------------------------------------------------- // Update all our internal data, including histogram virtual void Accumulate(Sample value, Count count, size_t index); //---------------------------------------------------------------------------- // Accessors for derived classes. //---------------------------------------------------------------------------- void SetBucketRange(size_t i, Sample value); // Validate that ranges_ was created sensibly (top and bottom range // values relate properly to the declared_min_ and declared_max_).. bool ValidateBucketRanges() const; virtual uint32_t CalculateRangeChecksum() const; // Finally, provide the state that changes with the addition of each new // sample. SampleSet sample_; private: friend class StatisticsRecorder; // To allow it to delete duplicates. // Post constructor initialization. void Initialize(); // Checksum function for accumulating range values into a checksum. static uint32_t Crc32(uint32_t sum, Sample range); //---------------------------------------------------------------------------- // Helpers for emitting Ascii graphic. Each method appends data to output. // Find out how large the (graphically) the largest bucket will appear to be. double GetPeakBucketSize(const SampleSet& snapshot) const; // Write a common header message describing this histogram. void WriteAsciiHeader(const SampleSet& snapshot, Count sample_count, std::string* output) const; // Write information about previous, current, and next buckets. // Information such as cumulative percentage, etc. void WriteAsciiBucketContext(const int64_t past, const Count current, const int64_t remaining, const size_t i, std::string* output) const; // Write textual description of the bucket contents (relative to histogram). // Output is the count in the buckets, as well as the percentage. void WriteAsciiBucketValue(Count current, double scaled_sum, std::string* output) const; // Produce actual graph (set of blank vs non blank char's) for a bucket. void WriteAsciiBucketGraph(double current_size, double max_size, std::string* output) const; //---------------------------------------------------------------------------- // Table for generating Crc32 values. static const uint32_t kCrcTable[256]; //---------------------------------------------------------------------------- // Invariant values set at/near construction time // ASCII version of original name given to the constructor. All identically // named instances will be coalesced cross-project. const std::string histogram_name_; Sample declared_min_; // Less than this goes into counts_[0] Sample declared_max_; // Over this goes into counts_[bucket_count_ - 1]. size_t bucket_count_; // Dimension of counts_[]. // Flag the histogram for recording by UMA via metric_services.h. Flags flags_; // For each index, show the least value that can be stored in the // corresponding bucket. We also append one extra element in this array, // containing kSampleType_MAX, to make calculations easy. // The dimension of ranges_ is bucket_count + 1. Ranges ranges_; // For redundancy, we store a checksum of all the sample ranges when ranges // are generated. If ever there is ever a difference, then the histogram must // have been corrupted. uint32_t range_checksum_; // When false, new samples are completely ignored. mozilla::Atomic recording_enabled_; DISALLOW_COPY_AND_ASSIGN(Histogram); }; //------------------------------------------------------------------------------ // LinearHistogram is a more traditional histogram, with evenly spaced // buckets. class LinearHistogram : public Histogram { public: virtual ~LinearHistogram(); /* minimum should start from 1. 0 is as minimum is invalid. 0 is an implicit default underflow bucket. */ static Histogram* FactoryGet(const std::string& name, Sample minimum, Sample maximum, size_t bucket_count, Flags flags); static Histogram* FactoryTimeGet(const std::string& name, TimeDelta minimum, TimeDelta maximum, size_t bucket_count, Flags flags); // Overridden from Histogram: virtual ClassType histogram_type() const; virtual void Accumulate(Sample value, Count count, size_t index); // Store a list of number/text values for use in rendering the histogram. // The last element in the array has a null in its "description" slot. virtual void SetRangeDescriptions(const DescriptionPair descriptions[]); protected: LinearHistogram(const std::string& name, Sample minimum, Sample maximum, size_t bucket_count); LinearHistogram(const std::string& name, TimeDelta minimum, TimeDelta maximum, size_t bucket_count); // Initialize ranges_ mapping. void InitializeBucketRange(); virtual double GetBucketSize(Count current, size_t i) const; // If we have a description for a bucket, then return that. Otherwise // let parent class provide a (numeric) description. virtual const std::string GetAsciiBucketRange(size_t i) const; // Skip printing of name for numeric range if we have a name (and if this is // an empty bucket). virtual bool PrintEmptyBucket(size_t index) const; private: // For some ranges, we store a printable description of a bucket range. // If there is no desciption, then GetAsciiBucketRange() uses parent class // to provide a description. typedef std::map BucketDescriptionMap; BucketDescriptionMap bucket_description_; DISALLOW_COPY_AND_ASSIGN(LinearHistogram); }; //------------------------------------------------------------------------------ // BooleanHistogram is a histogram for booleans. class BooleanHistogram : public LinearHistogram { public: static Histogram* FactoryGet(const std::string& name, Flags flags); virtual ClassType histogram_type() const; virtual void AddBoolean(bool value); virtual void Accumulate(Sample value, Count count, size_t index); protected: explicit BooleanHistogram(const std::string& name); DISALLOW_COPY_AND_ASSIGN(BooleanHistogram); }; //------------------------------------------------------------------------------ // FlagHistogram is like boolean histogram, but only allows a single off/on value. class FlagHistogram : public BooleanHistogram { public: static Histogram *FactoryGet(const std::string &name, Flags flags); virtual ClassType histogram_type() const; virtual void Accumulate(Sample value, Count count, size_t index); virtual void AddSampleSet(const SampleSet& sample); virtual void Clear(); private: explicit FlagHistogram(const std::string &name); bool mSwitched; DISALLOW_COPY_AND_ASSIGN(FlagHistogram); }; // CountHistogram only allows a single monotic counter value. class CountHistogram : public LinearHistogram { public: static Histogram *FactoryGet(const std::string &name, Flags flags); virtual ClassType histogram_type() const; virtual void Accumulate(Sample value, Count count, size_t index); virtual void AddSampleSet(const SampleSet& sample); private: explicit CountHistogram(const std::string &name); DISALLOW_COPY_AND_ASSIGN(CountHistogram); }; //------------------------------------------------------------------------------ // CustomHistogram is a histogram for a set of custom integers. class CustomHistogram : public Histogram { public: static Histogram* FactoryGet(const std::string& name, const std::vector& custom_ranges, Flags flags); // Overridden from Histogram: virtual ClassType histogram_type() const; protected: CustomHistogram(const std::string& name, const std::vector& custom_ranges); // Initialize ranges_ mapping. void InitializedCustomBucketRange(const std::vector& custom_ranges); virtual double GetBucketSize(Count current, size_t i) const; DISALLOW_COPY_AND_ASSIGN(CustomHistogram); }; //------------------------------------------------------------------------------ // StatisticsRecorder handles all histograms in the system. It provides a // general place for histograms to register, and supports a global API for // accessing (i.e., dumping, or graphing) the data in all the histograms. class StatisticsRecorder { public: typedef std::vector Histograms; StatisticsRecorder(); ~StatisticsRecorder(); // Find out if histograms can now be registered into our list. static bool IsActive(); // Register, or add a new histogram to the collection of statistics. If an // identically named histogram is already registered, then the argument // |histogram| will deleted. The returned value is always the registered // histogram (either the argument, or the pre-existing registered histogram). static Histogram* RegisterOrDeleteDuplicate(Histogram* histogram); // Methods for printing histograms. Only histograms which have query as // a substring are written to output (an empty string will process all // registered histograms). static void WriteHTMLGraph(const std::string& query, std::string* output); static void WriteGraph(const std::string& query, std::string* output); // Method for extracting histograms which were marked for use by UMA. static void GetHistograms(Histograms* output); // Find a histogram by name. It matches the exact name. This method is thread // safe. If a matching histogram is not found, then the |histogram| is // not changed. static bool FindHistogram(const std::string& query, Histogram** histogram); static bool dump_on_exit() { return dump_on_exit_; } static void set_dump_on_exit(bool enable) { dump_on_exit_ = enable; } // GetSnapshot copies some of the pointers to registered histograms into the // caller supplied vector (Histograms). Only histograms with names matching // query are returned. The query must be a substring of histogram name for its // pointer to be copied. static void GetSnapshot(const std::string& query, Histograms* snapshot); private: // We keep all registered histograms in a map, from name to histogram. typedef std::map HistogramMap; static HistogramMap* histograms_; // lock protects access to the above map. static Lock* lock_; // Dump all known histograms to log. static bool dump_on_exit_; DISALLOW_COPY_AND_ASSIGN(StatisticsRecorder); }; } // namespace base #endif // BASE_METRICS_HISTOGRAM_H_