diff options
Diffstat (limited to 'xpcom/tests/gtest/TestPipes.cpp')
| -rw-r--r-- | xpcom/tests/gtest/TestPipes.cpp | 1097 |
1 files changed, 1097 insertions, 0 deletions
diff --git a/xpcom/tests/gtest/TestPipes.cpp b/xpcom/tests/gtest/TestPipes.cpp new file mode 100644 index 000000000..87b923008 --- /dev/null +++ b/xpcom/tests/gtest/TestPipes.cpp @@ -0,0 +1,1097 @@ +/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* vim: set ts=8 sts=2 et sw=2 tw=80: */ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +#include <algorithm> +#include "gtest/gtest.h" +#include "Helpers.h" +#include "mozilla/ReentrantMonitor.h" +#include "nsCOMPtr.h" +#include "nsCRT.h" +#include "nsIAsyncInputStream.h" +#include "nsIAsyncOutputStream.h" +#include "nsIBufferedStreams.h" +#include "nsIClassInfo.h" +#include "nsICloneableInputStream.h" +#include "nsIInputStream.h" +#include "nsIOutputStream.h" +#include "nsIPipe.h" +#include "nsISeekableStream.h" +#include "nsIThread.h" +#include "nsIRunnable.h" +#include "nsStreamUtils.h" +#include "nsString.h" +#include "nsThreadUtils.h" +#include "prprf.h" +#include "prinrval.h" + +using namespace mozilla; + +#define ITERATIONS 33333 +char kTestPattern[] = "My hovercraft is full of eels.\n"; + +bool gTrace = false; + +static nsresult +WriteAll(nsIOutputStream *os, const char *buf, uint32_t bufLen, uint32_t *lenWritten) +{ + const char *p = buf; + *lenWritten = 0; + while (bufLen) { + uint32_t n; + nsresult rv = os->Write(p, bufLen, &n); + if (NS_FAILED(rv)) return rv; + p += n; + bufLen -= n; + *lenWritten += n; + } + return NS_OK; +} + +class nsReceiver final : public nsIRunnable { +public: + NS_DECL_THREADSAFE_ISUPPORTS + + NS_IMETHOD Run() override { + nsresult rv; + char buf[101]; + uint32_t count; + PRIntervalTime start = PR_IntervalNow(); + while (true) { + rv = mIn->Read(buf, 100, &count); + if (NS_FAILED(rv)) { + printf("read failed\n"); + break; + } + if (count == 0) { +// printf("EOF count = %d\n", mCount); + break; + } + + if (gTrace) { + buf[count] = '\0'; + printf("read: %s\n", buf); + } + mCount += count; + } + PRIntervalTime end = PR_IntervalNow(); + printf("read %d bytes, time = %dms\n", mCount, + PR_IntervalToMilliseconds(end - start)); + return rv; + } + + explicit nsReceiver(nsIInputStream* in) : mIn(in), mCount(0) { + } + + uint32_t GetBytesRead() { return mCount; } + +private: + ~nsReceiver() {} + +protected: + nsCOMPtr<nsIInputStream> mIn; + uint32_t mCount; +}; + +NS_IMPL_ISUPPORTS(nsReceiver, nsIRunnable) + +nsresult +TestPipe(nsIInputStream* in, nsIOutputStream* out) +{ + RefPtr<nsReceiver> receiver = new nsReceiver(in); + if (!receiver) + return NS_ERROR_OUT_OF_MEMORY; + + nsresult rv; + + nsCOMPtr<nsIThread> thread; + rv = NS_NewThread(getter_AddRefs(thread), receiver); + if (NS_FAILED(rv)) return rv; + + uint32_t total = 0; + PRIntervalTime start = PR_IntervalNow(); + for (uint32_t i = 0; i < ITERATIONS; i++) { + uint32_t writeCount; + char *buf = PR_smprintf("%d %s", i, kTestPattern); + uint32_t len = strlen(buf); + rv = WriteAll(out, buf, len, &writeCount); + if (gTrace) { + printf("wrote: "); + for (uint32_t j = 0; j < writeCount; j++) { + putc(buf[j], stdout); + } + printf("\n"); + } + PR_smprintf_free(buf); + if (NS_FAILED(rv)) return rv; + total += writeCount; + } + rv = out->Close(); + if (NS_FAILED(rv)) return rv; + + PRIntervalTime end = PR_IntervalNow(); + + thread->Shutdown(); + + printf("wrote %d bytes, time = %dms\n", total, + PR_IntervalToMilliseconds(end - start)); + EXPECT_EQ(receiver->GetBytesRead(), total); + + return NS_OK; +} + +//////////////////////////////////////////////////////////////////////////////// + +class nsShortReader final : public nsIRunnable { +public: + NS_DECL_THREADSAFE_ISUPPORTS + + NS_IMETHOD Run() override { + nsresult rv; + char buf[101]; + uint32_t count; + uint32_t total = 0; + while (true) { + //if (gTrace) + // printf("calling Read\n"); + rv = mIn->Read(buf, 100, &count); + if (NS_FAILED(rv)) { + printf("read failed\n"); + break; + } + if (count == 0) { + break; + } + + if (gTrace) { + // For next |printf()| call and possible others elsewhere. + buf[count] = '\0'; + + printf("read %d bytes: %s\n", count, buf); + } + + Received(count); + total += count; + } + printf("read %d bytes\n", total); + return rv; + } + + explicit nsShortReader(nsIInputStream* in) : mIn(in), mReceived(0) { + mMon = new ReentrantMonitor("nsShortReader"); + } + + void Received(uint32_t count) { + ReentrantMonitorAutoEnter mon(*mMon); + mReceived += count; + mon.Notify(); + } + + uint32_t WaitForReceipt(const uint32_t aWriteCount) { + ReentrantMonitorAutoEnter mon(*mMon); + uint32_t result = mReceived; + + while (result < aWriteCount) { + mon.Wait(); + + EXPECT_TRUE(mReceived > result); + result = mReceived; + } + + mReceived = 0; + return result; + } + +private: + ~nsShortReader() {} + +protected: + nsCOMPtr<nsIInputStream> mIn; + uint32_t mReceived; + ReentrantMonitor* mMon; +}; + +NS_IMPL_ISUPPORTS(nsShortReader, nsIRunnable) + +nsresult +TestShortWrites(nsIInputStream* in, nsIOutputStream* out) +{ + RefPtr<nsShortReader> receiver = new nsShortReader(in); + if (!receiver) + return NS_ERROR_OUT_OF_MEMORY; + + nsresult rv; + + nsCOMPtr<nsIThread> thread; + rv = NS_NewThread(getter_AddRefs(thread), receiver); + if (NS_FAILED(rv)) return rv; + + uint32_t total = 0; + for (uint32_t i = 0; i < ITERATIONS; i++) { + uint32_t writeCount; + char* buf = PR_smprintf("%d %s", i, kTestPattern); + uint32_t len = strlen(buf); + len = len * rand() / RAND_MAX; + len = std::min(1u, len); + rv = WriteAll(out, buf, len, &writeCount); + if (NS_FAILED(rv)) return rv; + EXPECT_EQ(writeCount, len); + total += writeCount; + + if (gTrace) + printf("wrote %d bytes: %s\n", writeCount, buf); + PR_smprintf_free(buf); + //printf("calling Flush\n"); + out->Flush(); + //printf("calling WaitForReceipt\n"); + +#ifdef DEBUG + const uint32_t received = + receiver->WaitForReceipt(writeCount); + EXPECT_EQ(received, writeCount); +#endif + } + rv = out->Close(); + if (NS_FAILED(rv)) return rv; + + thread->Shutdown(); + + printf("wrote %d bytes\n", total); + + return NS_OK; +} + +//////////////////////////////////////////////////////////////////////////////// + +class nsPump final : public nsIRunnable +{ +public: + NS_DECL_THREADSAFE_ISUPPORTS + + NS_IMETHOD Run() override { + nsresult rv; + uint32_t count; + while (true) { + rv = mOut->WriteFrom(mIn, ~0U, &count); + if (NS_FAILED(rv)) { + printf("Write failed\n"); + break; + } + if (count == 0) { + printf("EOF count = %d\n", mCount); + break; + } + + if (gTrace) { + printf("Wrote: %d\n", count); + } + mCount += count; + } + mOut->Close(); + return rv; + } + + nsPump(nsIInputStream* in, + nsIOutputStream* out) + : mIn(in), mOut(out), mCount(0) { + } + +private: + ~nsPump() {} + +protected: + nsCOMPtr<nsIInputStream> mIn; + nsCOMPtr<nsIOutputStream> mOut; + uint32_t mCount; +}; + +NS_IMPL_ISUPPORTS(nsPump, nsIRunnable) + +TEST(Pipes, ChainedPipes) +{ + nsresult rv; + if (gTrace) { + printf("TestChainedPipes\n"); + } + + nsCOMPtr<nsIInputStream> in1; + nsCOMPtr<nsIOutputStream> out1; + rv = NS_NewPipe(getter_AddRefs(in1), getter_AddRefs(out1), 20, 1999); + if (NS_FAILED(rv)) return; + + nsCOMPtr<nsIInputStream> in2; + nsCOMPtr<nsIOutputStream> out2; + rv = NS_NewPipe(getter_AddRefs(in2), getter_AddRefs(out2), 200, 401); + if (NS_FAILED(rv)) return; + + RefPtr<nsPump> pump = new nsPump(in1, out2); + if (pump == nullptr) return; + + nsCOMPtr<nsIThread> thread; + rv = NS_NewThread(getter_AddRefs(thread), pump); + if (NS_FAILED(rv)) return; + + RefPtr<nsReceiver> receiver = new nsReceiver(in2); + if (receiver == nullptr) return; + + nsCOMPtr<nsIThread> receiverThread; + rv = NS_NewThread(getter_AddRefs(receiverThread), receiver); + if (NS_FAILED(rv)) return; + + uint32_t total = 0; + for (uint32_t i = 0; i < ITERATIONS; i++) { + uint32_t writeCount; + char* buf = PR_smprintf("%d %s", i, kTestPattern); + uint32_t len = strlen(buf); + len = len * rand() / RAND_MAX; + len = std::max(1u, len); + rv = WriteAll(out1, buf, len, &writeCount); + if (NS_FAILED(rv)) return; + EXPECT_EQ(writeCount, len); + total += writeCount; + + if (gTrace) + printf("wrote %d bytes: %s\n", writeCount, buf); + + PR_smprintf_free(buf); + } + if (gTrace) { + printf("wrote total of %d bytes\n", total); + } + rv = out1->Close(); + if (NS_FAILED(rv)) return; + + thread->Shutdown(); + receiverThread->Shutdown(); +} + +//////////////////////////////////////////////////////////////////////////////// + +void +RunTests(uint32_t segSize, uint32_t segCount) +{ + nsresult rv; + nsCOMPtr<nsIInputStream> in; + nsCOMPtr<nsIOutputStream> out; + uint32_t bufSize = segSize * segCount; + if (gTrace) { + printf("Testing New Pipes: segment size %d buffer size %d\n", segSize, bufSize); + printf("Testing long writes...\n"); + } + rv = NS_NewPipe(getter_AddRefs(in), getter_AddRefs(out), segSize, bufSize); + EXPECT_TRUE(NS_SUCCEEDED(rv)); + rv = TestPipe(in, out); + EXPECT_TRUE(NS_SUCCEEDED(rv)); + + if (gTrace) { + printf("Testing short writes...\n"); + } + rv = NS_NewPipe(getter_AddRefs(in), getter_AddRefs(out), segSize, bufSize); + EXPECT_TRUE(NS_SUCCEEDED(rv)); + rv = TestShortWrites(in, out); + EXPECT_TRUE(NS_SUCCEEDED(rv)); +} + +TEST(Pipes, Main) +{ + RunTests(16, 1); + RunTests(4096, 16); +} + +//////////////////////////////////////////////////////////////////////////////// + +namespace { + +static const uint32_t DEFAULT_SEGMENT_SIZE = 4 * 1024; + +// An alternate pipe testing routing that uses NS_ConsumeStream() instead of +// manual read loop. +static void TestPipe2(uint32_t aNumBytes, + uint32_t aSegmentSize = DEFAULT_SEGMENT_SIZE) +{ + nsCOMPtr<nsIInputStream> reader; + nsCOMPtr<nsIOutputStream> writer; + + uint32_t maxSize = std::max(aNumBytes, aSegmentSize); + + nsresult rv = NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer), + aSegmentSize, maxSize); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsTArray<char> inputData; + testing::CreateData(aNumBytes, inputData); + testing::WriteAllAndClose(writer, inputData); + testing::ConsumeAndValidateStream(reader, inputData); +} + +} // namespace + +TEST(Pipes, Blocking_32k) +{ + TestPipe2(32 * 1024); +} + +TEST(Pipes, Blocking_64k) +{ + TestPipe2(64 * 1024); +} + +TEST(Pipes, Blocking_128k) +{ + TestPipe2(128 * 1024); +} + +//////////////////////////////////////////////////////////////////////////////// + +namespace { + +// Utility routine to validate pipe clone before. There are many knobs. +// +// aTotalBytes Total number of bytes to write to the pipe. +// aNumWrites How many separate write calls should be made. Bytes +// are evenly distributed over these write calls. +// aNumInitialClones How many clones of the pipe input stream should be +// made before writing begins. +// aNumToCloseAfterWrite How many streams should be closed after each write. +// One stream is always kept open. This verifies that +// closing one stream does not effect other open +// streams. +// aNumToCloneAfterWrite How many clones to create after each write. Occurs +// after closing any streams. This tests cloning +// active streams on a pipe that is being written to. +// aNumStreamToReadPerWrite How many streams to read fully after each write. +// This tests reading cloned streams at different rates +// while the pipe is being written to. +static void TestPipeClone(uint32_t aTotalBytes, + uint32_t aNumWrites, + uint32_t aNumInitialClones, + uint32_t aNumToCloseAfterWrite, + uint32_t aNumToCloneAfterWrite, + uint32_t aNumStreamsToReadPerWrite, + uint32_t aSegmentSize = DEFAULT_SEGMENT_SIZE) +{ + nsCOMPtr<nsIInputStream> reader; + nsCOMPtr<nsIOutputStream> writer; + + uint32_t maxSize = std::max(aTotalBytes, aSegmentSize); + + // Use async input streams so we can NS_ConsumeStream() the current data + // while the pipe is still being written to. + nsresult rv = NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer), + aSegmentSize, maxSize, + true, false); // non-blocking - reader, writer + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsCOMPtr<nsICloneableInputStream> cloneable = do_QueryInterface(reader); + ASSERT_TRUE(cloneable); + ASSERT_TRUE(cloneable->GetCloneable()); + + nsTArray<nsCString> outputDataList; + + nsTArray<nsCOMPtr<nsIInputStream>> streamList; + + // first stream is our original reader from the pipe + streamList.AppendElement(reader); + outputDataList.AppendElement(); + + // Clone the initial input stream the specified number of times + // before performing any writes. + for (uint32_t i = 0; i < aNumInitialClones; ++i) { + nsCOMPtr<nsIInputStream>* clone = streamList.AppendElement(); + rv = cloneable->Clone(getter_AddRefs(*clone)); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + ASSERT_TRUE(*clone); + + outputDataList.AppendElement(); + } + + nsTArray<char> inputData; + testing::CreateData(aTotalBytes, inputData); + + const uint32_t bytesPerWrite = ((aTotalBytes - 1)/ aNumWrites) + 1; + uint32_t offset = 0; + uint32_t remaining = aTotalBytes; + uint32_t nextStreamToRead = 0; + + while (remaining) { + uint32_t numToWrite = std::min(bytesPerWrite, remaining); + testing::Write(writer, inputData, offset, numToWrite); + offset += numToWrite; + remaining -= numToWrite; + + // Close the specified number of streams. This allows us to + // test that one closed clone does not break other open clones. + for (uint32_t i = 0; i < aNumToCloseAfterWrite && + streamList.Length() > 1; ++i) { + + uint32_t lastIndex = streamList.Length() - 1; + streamList[lastIndex]->Close(); + streamList.RemoveElementAt(lastIndex); + outputDataList.RemoveElementAt(lastIndex); + + if (nextStreamToRead >= streamList.Length()) { + nextStreamToRead = 0; + } + } + + // Create the specified number of clones. This lets us verify + // that we can create clones in the middle of pipe reading and + // writing. + for (uint32_t i = 0; i < aNumToCloneAfterWrite; ++i) { + nsCOMPtr<nsIInputStream>* clone = streamList.AppendElement(); + rv = cloneable->Clone(getter_AddRefs(*clone)); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + ASSERT_TRUE(*clone); + + // Initialize the new output data to make whats been read to data for + // the original stream. First stream is always the original stream. + nsCString* outputData = outputDataList.AppendElement(); + *outputData = outputDataList[0]; + } + + // Read the specified number of streams. This lets us verify that we + // can read from the clones at different rates while the pipe is being + // written to. + for (uint32_t i = 0; i < aNumStreamsToReadPerWrite; ++i) { + nsCOMPtr<nsIInputStream>& stream = streamList[nextStreamToRead]; + nsCString& outputData = outputDataList[nextStreamToRead]; + + // Can't use ConsumeAndValidateStream() here because we're not + // guaranteed the exact amount read. It should just be at least + // as many as numToWrite. + nsAutoCString tmpOutputData; + rv = NS_ConsumeStream(stream, UINT32_MAX, tmpOutputData); + ASSERT_TRUE(rv == NS_BASE_STREAM_WOULD_BLOCK || NS_SUCCEEDED(rv)); + ASSERT_GE(tmpOutputData.Length(), numToWrite); + + outputData += tmpOutputData; + + nextStreamToRead += 1; + if (nextStreamToRead >= streamList.Length()) { + // Note: When we wrap around on the streams being read, its possible + // we will trigger a segment to be deleted from the pipe. It + // would be nice to validate this here, but we don't have any + // QI'able interface that would let us check easily. + + nextStreamToRead = 0; + } + } + } + + rv = writer->Close(); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsDependentCSubstring inputString(inputData.Elements(), inputData.Length()); + + // Finally, read the remaining bytes from each stream. This may be + // different amounts of data depending on how much reading we did while + // writing. Verify that the end result matches the input data. + for (uint32_t i = 0; i < streamList.Length(); ++i) { + nsCOMPtr<nsIInputStream>& stream = streamList[i]; + nsCString& outputData = outputDataList[i]; + + nsAutoCString tmpOutputData; + rv = NS_ConsumeStream(stream, UINT32_MAX, tmpOutputData); + ASSERT_TRUE(rv == NS_BASE_STREAM_WOULD_BLOCK || NS_SUCCEEDED(rv)); + stream->Close(); + + // Append to total amount read from the stream + outputData += tmpOutputData; + + ASSERT_EQ(inputString.Length(), outputData.Length()); + ASSERT_TRUE(inputString.Equals(outputData)); + } +} + +} // namespace + +TEST(Pipes, Clone_BeforeWrite_ReadAtEnd) +{ + TestPipeClone(32 * 1024, // total bytes + 16, // num writes + 3, // num initial clones + 0, // num streams to close after each write + 0, // num clones to add after each write + 0); // num streams to read after each write +} + +TEST(Pipes, Clone_BeforeWrite_ReadDuringWrite) +{ + // Since this reads all streams on every write, it should trigger the + // pipe cursor roll back optimization. Currently we can only verify + // this with logging. + + TestPipeClone(32 * 1024, // total bytes + 16, // num writes + 3, // num initial clones + 0, // num streams to close after each write + 0, // num clones to add after each write + 4); // num streams to read after each write +} + +TEST(Pipes, Clone_DuringWrite_ReadAtEnd) +{ + TestPipeClone(32 * 1024, // total bytes + 16, // num writes + 0, // num initial clones + 0, // num streams to close after each write + 1, // num clones to add after each write + 0); // num streams to read after each write +} + +TEST(Pipes, Clone_DuringWrite_ReadDuringWrite) +{ + TestPipeClone(32 * 1024, // total bytes + 16, // num writes + 0, // num initial clones + 0, // num streams to close after each write + 1, // num clones to add after each write + 1); // num streams to read after each write +} + +TEST(Pipes, Clone_DuringWrite_ReadDuringWrite_CloseDuringWrite) +{ + // Since this reads streams faster than we clone new ones, it should + // trigger pipe segment deletion periodically. Currently we can + // only verify this with logging. + + TestPipeClone(32 * 1024, // total bytes + 16, // num writes + 1, // num initial clones + 1, // num streams to close after each write + 2, // num clones to add after each write + 3); // num streams to read after each write +} + +TEST(Pipes, Write_AsyncWait) +{ + nsCOMPtr<nsIAsyncInputStream> reader; + nsCOMPtr<nsIAsyncOutputStream> writer; + + const uint32_t segmentSize = 1024; + const uint32_t numSegments = 1; + + nsresult rv = NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer), + true, true, // non-blocking - reader, writer + segmentSize, numSegments); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsTArray<char> inputData; + testing::CreateData(segmentSize, inputData); + + uint32_t numWritten = 0; + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_EQ(NS_BASE_STREAM_WOULD_BLOCK, rv); + + RefPtr<testing::OutputStreamCallback> cb = + new testing::OutputStreamCallback(); + + rv = writer->AsyncWait(cb, 0, 0, nullptr); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + ASSERT_FALSE(cb->Called()); + + testing::ConsumeAndValidateStream(reader, inputData); + + ASSERT_TRUE(cb->Called()); +} + +TEST(Pipes, Write_AsyncWait_Clone) +{ + nsCOMPtr<nsIAsyncInputStream> reader; + nsCOMPtr<nsIAsyncOutputStream> writer; + + const uint32_t segmentSize = 1024; + const uint32_t numSegments = 1; + + nsresult rv = NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer), + true, true, // non-blocking - reader, writer + segmentSize, numSegments); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsCOMPtr<nsIInputStream> clone; + rv = NS_CloneInputStream(reader, getter_AddRefs(clone)); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsTArray<char> inputData; + testing::CreateData(segmentSize, inputData); + + uint32_t numWritten = 0; + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + // This attempts to write data beyond the original pipe size limit. It + // should fail since neither side of the clone has been read yet. + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_EQ(NS_BASE_STREAM_WOULD_BLOCK, rv); + + RefPtr<testing::OutputStreamCallback> cb = + new testing::OutputStreamCallback(); + + rv = writer->AsyncWait(cb, 0, 0, nullptr); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + ASSERT_FALSE(cb->Called()); + + // Consume data on the original stream, but the clone still has not been read. + testing::ConsumeAndValidateStream(reader, inputData); + + // A clone that is not being read should not stall the other input stream + // reader. Therefore the writer callback should trigger when the fastest + // reader drains the other input stream. + ASSERT_TRUE(cb->Called()); + + // Attempt to write data. This will buffer data beyond the pipe size limit in + // order for the clone stream to still work. This is allowed because the + // other input stream has drained its buffered segments and is ready for more + // data. + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + // Again, this should fail since the origin stream has not been read again. + // The pipe size should still restrict how far ahead we can buffer even + // when there is a cloned stream not being read. + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_FAILED(rv)); + + cb = new testing::OutputStreamCallback(); + rv = writer->AsyncWait(cb, 0, 0, nullptr); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + // The write should again be blocked since we have written data and the + // main reader is at its maximum advance buffer. + ASSERT_FALSE(cb->Called()); + + nsTArray<char> expectedCloneData; + expectedCloneData.AppendElements(inputData); + expectedCloneData.AppendElements(inputData); + + // We should now be able to consume the entire backlog of buffered data on + // the cloned stream. + testing::ConsumeAndValidateStream(clone, expectedCloneData); + + // Draining the clone side should also trigger the AsyncWait() writer + // callback + ASSERT_TRUE(cb->Called()); + + // Finally, we should be able to consume the remaining data on the original + // reader. + testing::ConsumeAndValidateStream(reader, inputData); +} + +TEST(Pipes, Write_AsyncWait_Clone_CloseOriginal) +{ + nsCOMPtr<nsIAsyncInputStream> reader; + nsCOMPtr<nsIAsyncOutputStream> writer; + + const uint32_t segmentSize = 1024; + const uint32_t numSegments = 1; + + nsresult rv = NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer), + true, true, // non-blocking - reader, writer + segmentSize, numSegments); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsCOMPtr<nsIInputStream> clone; + rv = NS_CloneInputStream(reader, getter_AddRefs(clone)); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsTArray<char> inputData; + testing::CreateData(segmentSize, inputData); + + uint32_t numWritten = 0; + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + // This attempts to write data beyond the original pipe size limit. It + // should fail since neither side of the clone has been read yet. + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_EQ(NS_BASE_STREAM_WOULD_BLOCK, rv); + + RefPtr<testing::OutputStreamCallback> cb = + new testing::OutputStreamCallback(); + + rv = writer->AsyncWait(cb, 0, 0, nullptr); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + ASSERT_FALSE(cb->Called()); + + // Consume data on the original stream, but the clone still has not been read. + testing::ConsumeAndValidateStream(reader, inputData); + + // A clone that is not being read should not stall the other input stream + // reader. Therefore the writer callback should trigger when the fastest + // reader drains the other input stream. + ASSERT_TRUE(cb->Called()); + + // Attempt to write data. This will buffer data beyond the pipe size limit in + // order for the clone stream to still work. This is allowed because the + // other input stream has drained its buffered segments and is ready for more + // data. + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + // Again, this should fail since the origin stream has not been read again. + // The pipe size should still restrict how far ahead we can buffer even + // when there is a cloned stream not being read. + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_FAILED(rv)); + + cb = new testing::OutputStreamCallback(); + rv = writer->AsyncWait(cb, 0, 0, nullptr); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + // The write should again be blocked since we have written data and the + // main reader is at its maximum advance buffer. + ASSERT_FALSE(cb->Called()); + + // Close the original reader input stream. This was the fastest reader, + // so we should have a single stream that is buffered beyond our nominal + // limit. + reader->Close(); + + // Because the clone stream is still buffered the writable callback should + // not be fired. + ASSERT_FALSE(cb->Called()); + + // And we should not be able to perform a write. + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_FAILED(rv)); + + // Create another clone stream. Now we have two streams that exceed our + // maximum size limit + nsCOMPtr<nsIInputStream> clone2; + rv = NS_CloneInputStream(clone, getter_AddRefs(clone2)); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsTArray<char> expectedCloneData; + expectedCloneData.AppendElements(inputData); + expectedCloneData.AppendElements(inputData); + + // We should now be able to consume the entire backlog of buffered data on + // the cloned stream. + testing::ConsumeAndValidateStream(clone, expectedCloneData); + + // The pipe should now be writable because we have two open streams, one of which + // is completely drained. + ASSERT_TRUE(cb->Called()); + + // Write again to reach our limit again. + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + // The stream is again non-writeable. + cb = new testing::OutputStreamCallback(); + rv = writer->AsyncWait(cb, 0, 0, nullptr); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + ASSERT_FALSE(cb->Called()); + + // Close the empty stream. This is different from our previous close since + // before we were closing a stream with some data still buffered. + clone->Close(); + + // The pipe should not be writable. The second clone is still fully buffered + // over our limit. + ASSERT_FALSE(cb->Called()); + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_FAILED(rv)); + + // Finally consume all of the buffered data on the second clone. + expectedCloneData.AppendElements(inputData); + testing::ConsumeAndValidateStream(clone2, expectedCloneData); + + // Draining the final clone should make the pipe writable again. + ASSERT_TRUE(cb->Called()); +} + +TEST(Pipes, Read_AsyncWait) +{ + nsCOMPtr<nsIAsyncInputStream> reader; + nsCOMPtr<nsIAsyncOutputStream> writer; + + const uint32_t segmentSize = 1024; + const uint32_t numSegments = 1; + + nsresult rv = NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer), + true, true, // non-blocking - reader, writer + segmentSize, numSegments); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsTArray<char> inputData; + testing::CreateData(segmentSize, inputData); + + RefPtr<testing::InputStreamCallback> cb = + new testing::InputStreamCallback(); + + rv = reader->AsyncWait(cb, 0, 0, nullptr); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + ASSERT_FALSE(cb->Called()); + + uint32_t numWritten = 0; + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + ASSERT_TRUE(cb->Called()); + + testing::ConsumeAndValidateStream(reader, inputData); +} + +TEST(Pipes, Read_AsyncWait_Clone) +{ + nsCOMPtr<nsIAsyncInputStream> reader; + nsCOMPtr<nsIAsyncOutputStream> writer; + + const uint32_t segmentSize = 1024; + const uint32_t numSegments = 1; + + nsresult rv = NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer), + true, true, // non-blocking - reader, writer + segmentSize, numSegments); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsCOMPtr<nsIInputStream> clone; + rv = NS_CloneInputStream(reader, getter_AddRefs(clone)); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsCOMPtr<nsIAsyncInputStream> asyncClone = do_QueryInterface(clone); + ASSERT_TRUE(asyncClone); + + nsTArray<char> inputData; + testing::CreateData(segmentSize, inputData); + + RefPtr<testing::InputStreamCallback> cb = + new testing::InputStreamCallback(); + + RefPtr<testing::InputStreamCallback> cb2 = + new testing::InputStreamCallback(); + + rv = reader->AsyncWait(cb, 0, 0, nullptr); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + ASSERT_FALSE(cb->Called()); + + rv = asyncClone->AsyncWait(cb2, 0, 0, nullptr); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + ASSERT_FALSE(cb2->Called()); + + uint32_t numWritten = 0; + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + ASSERT_TRUE(cb->Called()); + ASSERT_TRUE(cb2->Called()); + + testing::ConsumeAndValidateStream(reader, inputData); +} + +namespace { + +nsresult +CloseDuringReadFunc(nsIInputStream *aReader, + void* aClosure, + const char* aFromSegment, + uint32_t aToOffset, + uint32_t aCount, + uint32_t* aWriteCountOut) +{ + MOZ_RELEASE_ASSERT(aReader); + MOZ_RELEASE_ASSERT(aClosure); + MOZ_RELEASE_ASSERT(aFromSegment); + MOZ_RELEASE_ASSERT(aWriteCountOut); + MOZ_RELEASE_ASSERT(aToOffset == 0); + + // This is insanity and you probably should not do this under normal + // conditions. We want to simulate the case where the pipe is closed + // (possibly from other end on another thread) simultaneously with the + // read. This is the easiest way to do trigger this case in a synchronous + // gtest. + MOZ_ALWAYS_SUCCEEDS(aReader->Close()); + + nsTArray<char>* buffer = static_cast<nsTArray<char>*>(aClosure); + buffer->AppendElements(aFromSegment, aCount); + + *aWriteCountOut = aCount; + + return NS_OK; +} + +void +TestCloseDuringRead(uint32_t aSegmentSize, uint32_t aDataSize) +{ + nsCOMPtr<nsIInputStream> reader; + nsCOMPtr<nsIOutputStream> writer; + + const uint32_t maxSize = aSegmentSize; + + nsresult rv = NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer), + aSegmentSize, maxSize); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsTArray<char> inputData; + + testing::CreateData(aDataSize, inputData); + + uint32_t numWritten = 0; + rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsTArray<char> outputData; + + uint32_t numRead = 0; + rv = reader->ReadSegments(CloseDuringReadFunc, &outputData, + inputData.Length(), &numRead); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + ASSERT_EQ(inputData.Length(), numRead); + + ASSERT_EQ(inputData, outputData); + + uint64_t available; + rv = reader->Available(&available); + ASSERT_EQ(NS_BASE_STREAM_CLOSED, rv); +} + +} // namespace + +TEST(Pipes, Close_During_Read_Partial_Segment) +{ + TestCloseDuringRead(1024, 512); +} + +TEST(Pipes, Close_During_Read_Full_Segment) +{ + TestCloseDuringRead(1024, 1024); +} + +TEST(Pipes, Interfaces) +{ + nsCOMPtr<nsIInputStream> reader; + nsCOMPtr<nsIOutputStream> writer; + + nsresult rv = NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer)); + ASSERT_TRUE(NS_SUCCEEDED(rv)); + + nsCOMPtr<nsIAsyncInputStream> readerType1 = do_QueryInterface(reader); + ASSERT_TRUE(readerType1); + + nsCOMPtr<nsISeekableStream> readerType2 = do_QueryInterface(reader); + ASSERT_TRUE(readerType2); + + nsCOMPtr<nsISearchableInputStream> readerType3 = do_QueryInterface(reader); + ASSERT_TRUE(readerType3); + + nsCOMPtr<nsICloneableInputStream> readerType4 = do_QueryInterface(reader); + ASSERT_TRUE(readerType4); + + nsCOMPtr<nsIClassInfo> readerType5 = do_QueryInterface(reader); + ASSERT_TRUE(readerType5); + + nsCOMPtr<nsIBufferedInputStream> readerType6 = do_QueryInterface(reader); + ASSERT_TRUE(readerType6); +} |