diff options
Diffstat (limited to 'third_party/rust/libz-sys/src/zlib-1.2.8/win32')
8 files changed, 0 insertions, 1084 deletions
diff --git a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/DLL_FAQ.txt b/third_party/rust/libz-sys/src/zlib-1.2.8/win32/DLL_FAQ.txt deleted file mode 100644 index 12c009018..000000000 --- a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/DLL_FAQ.txt +++ /dev/null @@ -1,397 +0,0 @@ - - Frequently Asked Questions about ZLIB1.DLL - - -This document describes the design, the rationale, and the usage -of the official DLL build of zlib, named ZLIB1.DLL. If you have -general questions about zlib, you should see the file "FAQ" found -in the zlib distribution, or at the following location: - http://www.gzip.org/zlib/zlib_faq.html - - - 1. What is ZLIB1.DLL, and how can I get it? - - - ZLIB1.DLL is the official build of zlib as a DLL. - (Please remark the character '1' in the name.) - - Pointers to a precompiled ZLIB1.DLL can be found in the zlib - web site at: - http://www.zlib.net/ - - Applications that link to ZLIB1.DLL can rely on the following - specification: - - * The exported symbols are exclusively defined in the source - files "zlib.h" and "zlib.def", found in an official zlib - source distribution. - * The symbols are exported by name, not by ordinal. - * The exported names are undecorated. - * The calling convention of functions is "C" (CDECL). - * The ZLIB1.DLL binary is linked to MSVCRT.DLL. - - The archive in which ZLIB1.DLL is bundled contains compiled - test programs that must run with a valid build of ZLIB1.DLL. - It is recommended to download the prebuilt DLL from the zlib - web site, instead of building it yourself, to avoid potential - incompatibilities that could be introduced by your compiler - and build settings. If you do build the DLL yourself, please - make sure that it complies with all the above requirements, - and it runs with the precompiled test programs, bundled with - the original ZLIB1.DLL distribution. - - If, for any reason, you need to build an incompatible DLL, - please use a different file name. - - - 2. Why did you change the name of the DLL to ZLIB1.DLL? - What happened to the old ZLIB.DLL? - - - The old ZLIB.DLL, built from zlib-1.1.4 or earlier, required - compilation settings that were incompatible to those used by - a static build. The DLL settings were supposed to be enabled - by defining the macro ZLIB_DLL, before including "zlib.h". - Incorrect handling of this macro was silently accepted at - build time, resulting in two major problems: - - * ZLIB_DLL was missing from the old makefile. When building - the DLL, not all people added it to the build options. In - consequence, incompatible incarnations of ZLIB.DLL started - to circulate around the net. - - * When switching from using the static library to using the - DLL, applications had to define the ZLIB_DLL macro and - to recompile all the sources that contained calls to zlib - functions. Failure to do so resulted in creating binaries - that were unable to run with the official ZLIB.DLL build. - - The only possible solution that we could foresee was to make - a binary-incompatible change in the DLL interface, in order to - remove the dependency on the ZLIB_DLL macro, and to release - the new DLL under a different name. - - We chose the name ZLIB1.DLL, where '1' indicates the major - zlib version number. We hope that we will not have to break - the binary compatibility again, at least not as long as the - zlib-1.x series will last. - - There is still a ZLIB_DLL macro, that can trigger a more - efficient build and use of the DLL, but compatibility no - longer dependents on it. - - - 3. Can I build ZLIB.DLL from the new zlib sources, and replace - an old ZLIB.DLL, that was built from zlib-1.1.4 or earlier? - - - In principle, you can do it by assigning calling convention - keywords to the macros ZEXPORT and ZEXPORTVA. In practice, - it depends on what you mean by "an old ZLIB.DLL", because the - old DLL exists in several mutually-incompatible versions. - You have to find out first what kind of calling convention is - being used in your particular ZLIB.DLL build, and to use the - same one in the new build. If you don't know what this is all - about, you might be better off if you would just leave the old - DLL intact. - - - 4. Can I compile my application using the new zlib interface, and - link it to an old ZLIB.DLL, that was built from zlib-1.1.4 or - earlier? - - - The official answer is "no"; the real answer depends again on - what kind of ZLIB.DLL you have. Even if you are lucky, this - course of action is unreliable. - - If you rebuild your application and you intend to use a newer - version of zlib (post- 1.1.4), it is strongly recommended to - link it to the new ZLIB1.DLL. - - - 5. Why are the zlib symbols exported by name, and not by ordinal? - - - Although exporting symbols by ordinal is a little faster, it - is risky. Any single glitch in the maintenance or use of the - DEF file that contains the ordinals can result in incompatible - builds and frustrating crashes. Simply put, the benefits of - exporting symbols by ordinal do not justify the risks. - - Technically, it should be possible to maintain ordinals in - the DEF file, and still export the symbols by name. Ordinals - exist in every DLL, and even if the dynamic linking performed - at the DLL startup is searching for names, ordinals serve as - hints, for a faster name lookup. However, if the DEF file - contains ordinals, the Microsoft linker automatically builds - an implib that will cause the executables linked to it to use - those ordinals, and not the names. It is interesting to - notice that the GNU linker for Win32 does not suffer from this - problem. - - It is possible to avoid the DEF file if the exported symbols - are accompanied by a "__declspec(dllexport)" attribute in the - source files. You can do this in zlib by predefining the - ZLIB_DLL macro. - - - 6. I see that the ZLIB1.DLL functions use the "C" (CDECL) calling - convention. Why not use the STDCALL convention? - STDCALL is the standard convention in Win32, and I need it in - my Visual Basic project! - - (For readability, we use CDECL to refer to the convention - triggered by the "__cdecl" keyword, STDCALL to refer to - the convention triggered by "__stdcall", and FASTCALL to - refer to the convention triggered by "__fastcall".) - - - Most of the native Windows API functions (without varargs) use - indeed the WINAPI convention (which translates to STDCALL in - Win32), but the standard C functions use CDECL. If a user - application is intrinsically tied to the Windows API (e.g. - it calls native Windows API functions such as CreateFile()), - sometimes it makes sense to decorate its own functions with - WINAPI. But if ANSI C or POSIX portability is a goal (e.g. - it calls standard C functions such as fopen()), it is not a - sound decision to request the inclusion of <windows.h>, or to - use non-ANSI constructs, for the sole purpose to make the user - functions STDCALL-able. - - The functionality offered by zlib is not in the category of - "Windows functionality", but is more like "C functionality". - - Technically, STDCALL is not bad; in fact, it is slightly - faster than CDECL, and it works with variable-argument - functions, just like CDECL. It is unfortunate that, in spite - of using STDCALL in the Windows API, it is not the default - convention used by the C compilers that run under Windows. - The roots of the problem reside deep inside the unsafety of - the K&R-style function prototypes, where the argument types - are not specified; but that is another story for another day. - - The remaining fact is that CDECL is the default convention. - Even if an explicit convention is hard-coded into the function - prototypes inside C headers, problems may appear. The - necessity to expose the convention in users' callbacks is one - of these problems. - - The calling convention issues are also important when using - zlib in other programming languages. Some of them, like Ada - (GNAT) and Fortran (GNU G77), have C bindings implemented - initially on Unix, and relying on the C calling convention. - On the other hand, the pre- .NET versions of Microsoft Visual - Basic require STDCALL, while Borland Delphi prefers, although - it does not require, FASTCALL. - - In fairness to all possible uses of zlib outside the C - programming language, we choose the default "C" convention. - Anyone interested in different bindings or conventions is - encouraged to maintain specialized projects. The "contrib/" - directory from the zlib distribution already holds a couple - of foreign bindings, such as Ada, C++, and Delphi. - - - 7. I need a DLL for my Visual Basic project. What can I do? - - - Define the ZLIB_WINAPI macro before including "zlib.h", when - building both the DLL and the user application (except that - you don't need to define anything when using the DLL in Visual - Basic). The ZLIB_WINAPI macro will switch on the WINAPI - (STDCALL) convention. The name of this DLL must be different - than the official ZLIB1.DLL. - - Gilles Vollant has contributed a build named ZLIBWAPI.DLL, - with the ZLIB_WINAPI macro turned on, and with the minizip - functionality built in. For more information, please read - the notes inside "contrib/vstudio/readme.txt", found in the - zlib distribution. - - - 8. I need to use zlib in my Microsoft .NET project. What can I - do? - - - Henrik Ravn has contributed a .NET wrapper around zlib. Look - into contrib/dotzlib/, inside the zlib distribution. - - - 9. If my application uses ZLIB1.DLL, should I link it to - MSVCRT.DLL? Why? - - - It is not required, but it is recommended to link your - application to MSVCRT.DLL, if it uses ZLIB1.DLL. - - The executables (.EXE, .DLL, etc.) that are involved in the - same process and are using the C run-time library (i.e. they - are calling standard C functions), must link to the same - library. There are several libraries in the Win32 system: - CRTDLL.DLL, MSVCRT.DLL, the static C libraries, etc. - Since ZLIB1.DLL is linked to MSVCRT.DLL, the executables that - depend on it should also be linked to MSVCRT.DLL. - - -10. Why are you saying that ZLIB1.DLL and my application should - be linked to the same C run-time (CRT) library? I linked my - application and my DLLs to different C libraries (e.g. my - application to a static library, and my DLLs to MSVCRT.DLL), - and everything works fine. - - - If a user library invokes only pure Win32 API (accessible via - <windows.h> and the related headers), its DLL build will work - in any context. But if this library invokes standard C API, - things get more complicated. - - There is a single Win32 library in a Win32 system. Every - function in this library resides in a single DLL module, that - is safe to call from anywhere. On the other hand, there are - multiple versions of the C library, and each of them has its - own separate internal state. Standalone executables and user - DLLs that call standard C functions must link to a C run-time - (CRT) library, be it static or shared (DLL). Intermixing - occurs when an executable (not necessarily standalone) and a - DLL are linked to different CRTs, and both are running in the - same process. - - Intermixing multiple CRTs is possible, as long as their - internal states are kept intact. The Microsoft Knowledge Base - articles KB94248 "HOWTO: Use the C Run-Time" and KB140584 - "HOWTO: Link with the Correct C Run-Time (CRT) Library" - mention the potential problems raised by intermixing. - - If intermixing works for you, it's because your application - and DLLs are avoiding the corruption of each of the CRTs' - internal states, maybe by careful design, or maybe by fortune. - - Also note that linking ZLIB1.DLL to non-Microsoft CRTs, such - as those provided by Borland, raises similar problems. - - -11. Why are you linking ZLIB1.DLL to MSVCRT.DLL? - - - MSVCRT.DLL exists on every Windows 95 with a new service pack - installed, or with Microsoft Internet Explorer 4 or later, and - on all other Windows 4.x or later (Windows 98, Windows NT 4, - or later). It is freely distributable; if not present in the - system, it can be downloaded from Microsoft or from other - software provider for free. - - The fact that MSVCRT.DLL does not exist on a virgin Windows 95 - is not so problematic. Windows 95 is scarcely found nowadays, - Microsoft ended its support a long time ago, and many recent - applications from various vendors, including Microsoft, do not - even run on it. Furthermore, no serious user should run - Windows 95 without a proper update installed. - - -12. Why are you not linking ZLIB1.DLL to - <<my favorite C run-time library>> ? - - - We considered and abandoned the following alternatives: - - * Linking ZLIB1.DLL to a static C library (LIBC.LIB, or - LIBCMT.LIB) is not a good option. People are using the DLL - mainly to save disk space. If you are linking your program - to a static C library, you may as well consider linking zlib - in statically, too. - - * Linking ZLIB1.DLL to CRTDLL.DLL looks appealing, because - CRTDLL.DLL is present on every Win32 installation. - Unfortunately, it has a series of problems: it does not - work properly with Microsoft's C++ libraries, it does not - provide support for 64-bit file offsets, (and so on...), - and Microsoft discontinued its support a long time ago. - - * Linking ZLIB1.DLL to MSVCR70.DLL or MSVCR71.DLL, supplied - with the Microsoft .NET platform, and Visual C++ 7.0/7.1, - raises problems related to the status of ZLIB1.DLL as a - system component. According to the Microsoft Knowledge Base - article KB326922 "INFO: Redistribution of the Shared C - Runtime Component in Visual C++ .NET", MSVCR70.DLL and - MSVCR71.DLL are not supposed to function as system DLLs, - because they may clash with MSVCRT.DLL. Instead, the - application's installer is supposed to put these DLLs - (if needed) in the application's private directory. - If ZLIB1.DLL depends on a non-system runtime, it cannot - function as a redistributable system component. - - * Linking ZLIB1.DLL to non-Microsoft runtimes, such as - Borland's, or Cygwin's, raises problems related to the - reliable presence of these runtimes on Win32 systems. - It's easier to let the DLL build of zlib up to the people - who distribute these runtimes, and who may proceed as - explained in the answer to Question 14. - - -13. If ZLIB1.DLL cannot be linked to MSVCR70.DLL or MSVCR71.DLL, - how can I build/use ZLIB1.DLL in Microsoft Visual C++ 7.0 - (Visual Studio .NET) or newer? - - - Due to the problems explained in the Microsoft Knowledge Base - article KB326922 (see the previous answer), the C runtime that - comes with the VC7 environment is no longer considered a - system component. That is, it should not be assumed that this - runtime exists, or may be installed in a system directory. - Since ZLIB1.DLL is supposed to be a system component, it may - not depend on a non-system component. - - In order to link ZLIB1.DLL and your application to MSVCRT.DLL - in VC7, you need the library of Visual C++ 6.0 or older. If - you don't have this library at hand, it's probably best not to - use ZLIB1.DLL. - - We are hoping that, in the future, Microsoft will provide a - way to build applications linked to a proper system runtime, - from the Visual C++ environment. Until then, you have a - couple of alternatives, such as linking zlib in statically. - If your application requires dynamic linking, you may proceed - as explained in the answer to Question 14. - - -14. I need to link my own DLL build to a CRT different than - MSVCRT.DLL. What can I do? - - - Feel free to rebuild the DLL from the zlib sources, and link - it the way you want. You should, however, clearly state that - your build is unofficial. You should give it a different file - name, and/or install it in a private directory that can be - accessed by your application only, and is not visible to the - others (i.e. it's neither in the PATH, nor in the SYSTEM or - SYSTEM32 directories). Otherwise, your build may clash with - applications that link to the official build. - - For example, in Cygwin, zlib is linked to the Cygwin runtime - CYGWIN1.DLL, and it is distributed under the name CYGZ.DLL. - - -15. May I include additional pieces of code that I find useful, - link them in ZLIB1.DLL, and export them? - - - No. A legitimate build of ZLIB1.DLL must not include code - that does not originate from the official zlib source code. - But you can make your own private DLL build, under a different - file name, as suggested in the previous answer. - - For example, zlib is a part of the VCL library, distributed - with Borland Delphi and C++ Builder. The DLL build of VCL - is a redistributable file, named VCLxx.DLL. - - -16. May I remove some functionality out of ZLIB1.DLL, by enabling - macros like NO_GZCOMPRESS or NO_GZIP at compile time? - - - No. A legitimate build of ZLIB1.DLL must provide the complete - zlib functionality, as implemented in the official zlib source - code. But you can make your own private DLL build, under a - different file name, as suggested in the previous answer. - - -17. I made my own ZLIB1.DLL build. Can I test it for compliance? - - - We prefer that you download the official DLL from the zlib - web site. If you need something peculiar from this DLL, you - can send your suggestion to the zlib mailing list. - - However, in case you do rebuild the DLL yourself, you can run - it with the test programs found in the DLL distribution. - Running these test programs is not a guarantee of compliance, - but a failure can imply a detected problem. - -** - -This document is written and maintained by -Cosmin Truta <cosmint@cs.ubbcluj.ro> diff --git a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/Makefile.bor b/third_party/rust/libz-sys/src/zlib-1.2.8/win32/Makefile.bor deleted file mode 100644 index d152bbb7f..000000000 --- a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/Makefile.bor +++ /dev/null @@ -1,110 +0,0 @@ -# Makefile for zlib -# Borland C++ for Win32 -# -# Usage: -# make -f win32/Makefile.bor -# make -f win32/Makefile.bor LOCAL_ZLIB=-DASMV OBJA=match.obj OBJPA=+match.obj - -# ------------ Borland C++ ------------ - -# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7) -# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or -# added to the declaration of LOC here: -LOC = $(LOCAL_ZLIB) - -CC = bcc32 -AS = bcc32 -LD = bcc32 -AR = tlib -CFLAGS = -a -d -k- -O2 $(LOC) -ASFLAGS = $(LOC) -LDFLAGS = $(LOC) - - -# variables -ZLIB_LIB = zlib.lib - -OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj -OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj -#OBJA = -OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj -OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj -#OBJPA= - - -# targets -all: $(ZLIB_LIB) example.exe minigzip.exe - -.c.obj: - $(CC) -c $(CFLAGS) $< - -.asm.obj: - $(AS) -c $(ASFLAGS) $< - -adler32.obj: adler32.c zlib.h zconf.h - -compress.obj: compress.c zlib.h zconf.h - -crc32.obj: crc32.c zlib.h zconf.h crc32.h - -deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h - -gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h - -gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h - -gzread.obj: gzread.c zlib.h zconf.h gzguts.h - -gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h - -infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ - inffast.h inffixed.h - -inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ - inffast.h - -inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ - inffast.h inffixed.h - -inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h - -trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h - -uncompr.obj: uncompr.c zlib.h zconf.h - -zutil.obj: zutil.c zutil.h zlib.h zconf.h - -example.obj: test/example.c zlib.h zconf.h - -minigzip.obj: test/minigzip.c zlib.h zconf.h - - -# For the sake of the old Borland make, -# the command line is cut to fit in the MS-DOS 128 byte limit: -$(ZLIB_LIB): $(OBJ1) $(OBJ2) $(OBJA) - -del $(ZLIB_LIB) - $(AR) $(ZLIB_LIB) $(OBJP1) - $(AR) $(ZLIB_LIB) $(OBJP2) - $(AR) $(ZLIB_LIB) $(OBJPA) - - -# testing -test: example.exe minigzip.exe - example - echo hello world | minigzip | minigzip -d - -example.exe: example.obj $(ZLIB_LIB) - $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) - -minigzip.exe: minigzip.obj $(ZLIB_LIB) - $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) - - -# cleanup -clean: - -del $(ZLIB_LIB) - -del *.obj - -del *.exe - -del *.tds - -del zlib.bak - -del foo.gz diff --git a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/Makefile.gcc b/third_party/rust/libz-sys/src/zlib-1.2.8/win32/Makefile.gcc deleted file mode 100644 index 6d1ded622..000000000 --- a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/Makefile.gcc +++ /dev/null @@ -1,182 +0,0 @@ -# Makefile for zlib, derived from Makefile.dj2. -# Modified for mingw32 by C. Spieler, 6/16/98. -# Updated for zlib 1.2.x by Christian Spieler and Cosmin Truta, Mar-2003. -# Last updated: Mar 2012. -# Tested under Cygwin and MinGW. - -# Copyright (C) 1995-2003 Jean-loup Gailly. -# For conditions of distribution and use, see copyright notice in zlib.h - -# To compile, or to compile and test, type from the top level zlib directory: -# -# make -fwin32/Makefile.gcc; make test testdll -fwin32/Makefile.gcc -# -# To use the asm code, type: -# cp contrib/asm?86/match.S ./match.S -# make LOC=-DASMV OBJA=match.o -fwin32/Makefile.gcc -# -# To install libz.a, zconf.h and zlib.h in the system directories, type: -# -# make install -fwin32/Makefile.gcc -# -# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set. -# -# To install the shared lib, append SHARED_MODE=1 to the make command : -# -# make install -fwin32/Makefile.gcc SHARED_MODE=1 - -# Note: -# If the platform is *not* MinGW (e.g. it is Cygwin or UWIN), -# the DLL name should be changed from "zlib1.dll". - -STATICLIB = libz.a -SHAREDLIB = zlib1.dll -IMPLIB = libz.dll.a - -# -# Set to 1 if shared object needs to be installed -# -SHARED_MODE=0 - -#LOC = -DASMV -#LOC = -DDEBUG -g - -PREFIX = -CC = $(PREFIX)gcc -CFLAGS = $(LOC) -O3 -Wall - -AS = $(CC) -ASFLAGS = $(LOC) -Wall - -LD = $(CC) -LDFLAGS = $(LOC) - -AR = $(PREFIX)ar -ARFLAGS = rcs - -RC = $(PREFIX)windres -RCFLAGS = --define GCC_WINDRES - -STRIP = $(PREFIX)strip - -CP = cp -fp -# If GNU install is available, replace $(CP) with install. -INSTALL = $(CP) -RM = rm -f - -prefix ?= /usr/local -exec_prefix = $(prefix) - -OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \ - gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o -OBJA = - -all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) example.exe minigzip.exe example_d.exe minigzip_d.exe - -test: example.exe minigzip.exe - ./example - echo hello world | ./minigzip | ./minigzip -d - -testdll: example_d.exe minigzip_d.exe - ./example_d - echo hello world | ./minigzip_d | ./minigzip_d -d - -.c.o: - $(CC) $(CFLAGS) -c -o $@ $< - -.S.o: - $(AS) $(ASFLAGS) -c -o $@ $< - -$(STATICLIB): $(OBJS) $(OBJA) - $(AR) $(ARFLAGS) $@ $(OBJS) $(OBJA) - -$(IMPLIB): $(SHAREDLIB) - -$(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlibrc.o - $(CC) -shared -Wl,--out-implib,$(IMPLIB) $(LDFLAGS) \ - -o $@ win32/zlib.def $(OBJS) $(OBJA) zlibrc.o - $(STRIP) $@ - -example.exe: example.o $(STATICLIB) - $(LD) $(LDFLAGS) -o $@ example.o $(STATICLIB) - $(STRIP) $@ - -minigzip.exe: minigzip.o $(STATICLIB) - $(LD) $(LDFLAGS) -o $@ minigzip.o $(STATICLIB) - $(STRIP) $@ - -example_d.exe: example.o $(IMPLIB) - $(LD) $(LDFLAGS) -o $@ example.o $(IMPLIB) - $(STRIP) $@ - -minigzip_d.exe: minigzip.o $(IMPLIB) - $(LD) $(LDFLAGS) -o $@ minigzip.o $(IMPLIB) - $(STRIP) $@ - -example.o: test/example.c zlib.h zconf.h - $(CC) $(CFLAGS) -I. -c -o $@ test/example.c - -minigzip.o: test/minigzip.c zlib.h zconf.h - $(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c - -zlibrc.o: win32/zlib1.rc - $(RC) $(RCFLAGS) -o $@ win32/zlib1.rc - -.PHONY: install uninstall clean - -install: zlib.h zconf.h $(STATICLIB) $(IMPLIB) - @if test -z "$(DESTDIR)$(INCLUDE_PATH)" -o -z "$(DESTDIR)$(LIBRARY_PATH)" -o -z "$(DESTDIR)$(BINARY_PATH)"; then \ - echo INCLUDE_PATH, LIBRARY_PATH, and BINARY_PATH must be specified; \ - exit 1; \ - fi - -@mkdir -p '$(DESTDIR)$(INCLUDE_PATH)' - -@mkdir -p '$(DESTDIR)$(LIBRARY_PATH)' '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig - -if [ "$(SHARED_MODE)" = "1" ]; then \ - mkdir -p '$(DESTDIR)$(BINARY_PATH)'; \ - $(INSTALL) $(SHAREDLIB) '$(DESTDIR)$(BINARY_PATH)'; \ - $(INSTALL) $(IMPLIB) '$(DESTDIR)$(LIBRARY_PATH)'; \ - fi - -$(INSTALL) zlib.h '$(DESTDIR)$(INCLUDE_PATH)' - -$(INSTALL) zconf.h '$(DESTDIR)$(INCLUDE_PATH)' - -$(INSTALL) $(STATICLIB) '$(DESTDIR)$(LIBRARY_PATH)' - sed \ - -e 's|@prefix@|${prefix}|g' \ - -e 's|@exec_prefix@|${exec_prefix}|g' \ - -e 's|@libdir@|$(LIBRARY_PATH)|g' \ - -e 's|@sharedlibdir@|$(LIBRARY_PATH)|g' \ - -e 's|@includedir@|$(INCLUDE_PATH)|g' \ - -e 's|@VERSION@|'`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' zlib.h`'|g' \ - zlib.pc.in > '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig/zlib.pc - -uninstall: - -if [ "$(SHARED_MODE)" = "1" ]; then \ - $(RM) '$(DESTDIR)$(BINARY_PATH)'/$(SHAREDLIB); \ - $(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(IMPLIB); \ - fi - -$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zlib.h - -$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zconf.h - -$(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(STATICLIB) - -clean: - -$(RM) $(STATICLIB) - -$(RM) $(SHAREDLIB) - -$(RM) $(IMPLIB) - -$(RM) *.o - -$(RM) *.exe - -$(RM) foo.gz - -adler32.o: zlib.h zconf.h -compress.o: zlib.h zconf.h -crc32.o: crc32.h zlib.h zconf.h -deflate.o: deflate.h zutil.h zlib.h zconf.h -gzclose.o: zlib.h zconf.h gzguts.h -gzlib.o: zlib.h zconf.h gzguts.h -gzread.o: zlib.h zconf.h gzguts.h -gzwrite.o: zlib.h zconf.h gzguts.h -inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h -inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h -infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h -inftrees.o: zutil.h zlib.h zconf.h inftrees.h -trees.o: deflate.h zutil.h zlib.h zconf.h trees.h -uncompr.o: zlib.h zconf.h -zutil.o: zutil.h zlib.h zconf.h diff --git a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/Makefile.msc b/third_party/rust/libz-sys/src/zlib-1.2.8/win32/Makefile.msc deleted file mode 100644 index 67b773171..000000000 --- a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/Makefile.msc +++ /dev/null @@ -1,163 +0,0 @@ -# Makefile for zlib using Microsoft (Visual) C -# zlib is copyright (C) 1995-2006 Jean-loup Gailly and Mark Adler -# -# Usage: -# nmake -f win32/Makefile.msc (standard build) -# nmake -f win32/Makefile.msc LOC=-DFOO (nonstandard build) -# nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" \ -# OBJA="inffas32.obj match686.obj" (use ASM code, x86) -# nmake -f win32/Makefile.msc AS=ml64 LOC="-DASMV -DASMINF -I." \ -# OBJA="inffasx64.obj gvmat64.obj inffas8664.obj" (use ASM code, x64) - -# The toplevel directory of the source tree. -# -TOP = . - -# optional build flags -LOC = - -# variables -STATICLIB = zlib.lib -SHAREDLIB = zlib1.dll -IMPLIB = zdll.lib - -CC = cl -AS = ml -LD = link -AR = lib -RC = rc -CFLAGS = -nologo -MD -W3 -O2 -Oy- -Zi -Fd"zlib" $(LOC) -WFLAGS = -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE -ASFLAGS = -coff -Zi $(LOC) -LDFLAGS = -nologo -debug -incremental:no -opt:ref -ARFLAGS = -nologo -RCFLAGS = /dWIN32 /r - -OBJS = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj \ - gzwrite.obj infback.obj inflate.obj inftrees.obj inffast.obj trees.obj uncompr.obj zutil.obj -OBJA = - - -# targets -all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) \ - example.exe minigzip.exe example_d.exe minigzip_d.exe - -$(STATICLIB): $(OBJS) $(OBJA) - $(AR) $(ARFLAGS) -out:$@ $(OBJS) $(OBJA) - -$(IMPLIB): $(SHAREDLIB) - -$(SHAREDLIB): $(TOP)/win32/zlib.def $(OBJS) $(OBJA) zlib1.res - $(LD) $(LDFLAGS) -def:$(TOP)/win32/zlib.def -dll -implib:$(IMPLIB) \ - -out:$@ -base:0x5A4C0000 $(OBJS) $(OBJA) zlib1.res - if exist $@.manifest \ - mt -nologo -manifest $@.manifest -outputresource:$@;2 - -example.exe: example.obj $(STATICLIB) - $(LD) $(LDFLAGS) example.obj $(STATICLIB) - if exist $@.manifest \ - mt -nologo -manifest $@.manifest -outputresource:$@;1 - -minigzip.exe: minigzip.obj $(STATICLIB) - $(LD) $(LDFLAGS) minigzip.obj $(STATICLIB) - if exist $@.manifest \ - mt -nologo -manifest $@.manifest -outputresource:$@;1 - -example_d.exe: example.obj $(IMPLIB) - $(LD) $(LDFLAGS) -out:$@ example.obj $(IMPLIB) - if exist $@.manifest \ - mt -nologo -manifest $@.manifest -outputresource:$@;1 - -minigzip_d.exe: minigzip.obj $(IMPLIB) - $(LD) $(LDFLAGS) -out:$@ minigzip.obj $(IMPLIB) - if exist $@.manifest \ - mt -nologo -manifest $@.manifest -outputresource:$@;1 - -{$(TOP)}.c.obj: - $(CC) -c $(WFLAGS) $(CFLAGS) $< - -{$(TOP)/test}.c.obj: - $(CC) -c -I$(TOP) $(WFLAGS) $(CFLAGS) $< - -{$(TOP)/contrib/masmx64}.c.obj: - $(CC) -c $(WFLAGS) $(CFLAGS) $< - -{$(TOP)/contrib/masmx64}.asm.obj: - $(AS) -c $(ASFLAGS) $< - -{$(TOP)/contrib/masmx86}.asm.obj: - $(AS) -c $(ASFLAGS) $< - -adler32.obj: $(TOP)/adler32.c $(TOP)/zlib.h $(TOP)/zconf.h - -compress.obj: $(TOP)/compress.c $(TOP)/zlib.h $(TOP)/zconf.h - -crc32.obj: $(TOP)/crc32.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/crc32.h - -deflate.obj: $(TOP)/deflate.c $(TOP)/deflate.h $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h - -gzclose.obj: $(TOP)/gzclose.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h - -gzlib.obj: $(TOP)/gzlib.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h - -gzread.obj: $(TOP)/gzread.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h - -gzwrite.obj: $(TOP)/gzwrite.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h - -infback.obj: $(TOP)/infback.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \ - $(TOP)/inffast.h $(TOP)/inffixed.h - -inffast.obj: $(TOP)/inffast.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \ - $(TOP)/inffast.h - -inflate.obj: $(TOP)/inflate.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \ - $(TOP)/inffast.h $(TOP)/inffixed.h - -inftrees.obj: $(TOP)/inftrees.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h - -trees.obj: $(TOP)/trees.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/deflate.h $(TOP)/trees.h - -uncompr.obj: $(TOP)/uncompr.c $(TOP)/zlib.h $(TOP)/zconf.h - -zutil.obj: $(TOP)/zutil.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h - -gvmat64.obj: $(TOP)/contrib\masmx64\gvmat64.asm - -inffasx64.obj: $(TOP)/contrib\masmx64\inffasx64.asm - -inffas8664.obj: $(TOP)/contrib\masmx64\inffas8664.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h \ - $(TOP)/inftrees.h $(TOP)/inflate.h $(TOP)/inffast.h - -inffas32.obj: $(TOP)/contrib\masmx86\inffas32.asm - -match686.obj: $(TOP)/contrib\masmx86\match686.asm - -example.obj: $(TOP)/test/example.c $(TOP)/zlib.h $(TOP)/zconf.h - -minigzip.obj: $(TOP)/test/minigzip.c $(TOP)/zlib.h $(TOP)/zconf.h - -zlib1.res: $(TOP)/win32/zlib1.rc - $(RC) $(RCFLAGS) /fo$@ $(TOP)/win32/zlib1.rc - -# testing -test: example.exe minigzip.exe - example - echo hello world | minigzip | minigzip -d - -testdll: example_d.exe minigzip_d.exe - example_d - echo hello world | minigzip_d | minigzip_d -d - - -# cleanup -clean: - -del $(STATICLIB) - -del $(SHAREDLIB) - -del $(IMPLIB) - -del *.obj - -del *.res - -del *.exp - -del *.exe - -del *.pdb - -del *.manifest - -del foo.gz diff --git a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/README-WIN32.txt b/third_party/rust/libz-sys/src/zlib-1.2.8/win32/README-WIN32.txt deleted file mode 100644 index 3d77d521e..000000000 --- a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/README-WIN32.txt +++ /dev/null @@ -1,103 +0,0 @@ -ZLIB DATA COMPRESSION LIBRARY - -zlib 1.2.8 is a general purpose data compression library. All the code is -thread safe. The data format used by the zlib library is described by RFCs -(Request for Comments) 1950 to 1952 in the files -http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format) -and rfc1952.txt (gzip format). - -All functions of the compression library are documented in the file zlib.h -(volunteer to write man pages welcome, contact zlib@gzip.org). Two compiled -examples are distributed in this package, example and minigzip. The example_d -and minigzip_d flavors validate that the zlib1.dll file is working correctly. - -Questions about zlib should be sent to <zlib@gzip.org>. The zlib home page -is http://zlib.net/ . Before reporting a problem, please check this site to -verify that you have the latest version of zlib; otherwise get the latest -version and check whether the problem still exists or not. - -PLEASE read DLL_FAQ.txt, and the the zlib FAQ http://zlib.net/zlib_faq.html -before asking for help. - - -Manifest: - -The package zlib-1.2.8-win32-x86.zip will contain the following files: - - README-WIN32.txt This document - ChangeLog Changes since previous zlib packages - DLL_FAQ.txt Frequently asked questions about zlib1.dll - zlib.3.pdf Documentation of this library in Adobe Acrobat format - - example.exe A statically-bound example (using zlib.lib, not the dll) - example.pdb Symbolic information for debugging example.exe - - example_d.exe A zlib1.dll bound example (using zdll.lib) - example_d.pdb Symbolic information for debugging example_d.exe - - minigzip.exe A statically-bound test program (using zlib.lib, not the dll) - minigzip.pdb Symbolic information for debugging minigzip.exe - - minigzip_d.exe A zlib1.dll bound test program (using zdll.lib) - minigzip_d.pdb Symbolic information for debugging minigzip_d.exe - - zlib.h Install these files into the compilers' INCLUDE path to - zconf.h compile programs which use zlib.lib or zdll.lib - - zdll.lib Install these files into the compilers' LIB path if linking - zdll.exp a compiled program to the zlib1.dll binary - - zlib.lib Install these files into the compilers' LIB path to link zlib - zlib.pdb into compiled programs, without zlib1.dll runtime dependency - (zlib.pdb provides debugging info to the compile time linker) - - zlib1.dll Install this binary shared library into the system PATH, or - the program's runtime directory (where the .exe resides) - zlib1.pdb Install in the same directory as zlib1.dll, in order to debug - an application crash using WinDbg or similar tools. - -All .pdb files above are entirely optional, but are very useful to a developer -attempting to diagnose program misbehavior or a crash. Many additional -important files for developers can be found in the zlib127.zip source package -available from http://zlib.net/ - review that package's README file for details. - - -Acknowledgments: - -The deflate format used by zlib was defined by Phil Katz. The deflate and -zlib specifications were written by L. Peter Deutsch. Thanks to all the -people who reported problems and suggested various improvements in zlib; they -are too numerous to cite here. - - -Copyright notice: - - (C) 1995-2012 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - jloup@gzip.org madler@alumni.caltech.edu - -If you use the zlib library in a product, we would appreciate *not* receiving -lengthy legal documents to sign. The sources are provided for free but without -warranty of any kind. The library has been entirely written by Jean-loup -Gailly and Mark Adler; it does not include third-party code. - -If you redistribute modified sources, we would appreciate that you include in -the file ChangeLog history information documenting your changes. Please read -the FAQ for more information on the distribution of modified source versions. diff --git a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/VisualC.txt b/third_party/rust/libz-sys/src/zlib-1.2.8/win32/VisualC.txt deleted file mode 100644 index 579a5fc9e..000000000 --- a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/VisualC.txt +++ /dev/null @@ -1,3 +0,0 @@ - -To build zlib using the Microsoft Visual C++ environment, -use the appropriate project from the projects/ directory. diff --git a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/zlib.def b/third_party/rust/libz-sys/src/zlib-1.2.8/win32/zlib.def deleted file mode 100644 index face65518..000000000 --- a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/zlib.def +++ /dev/null @@ -1,86 +0,0 @@ -; zlib data compression library -EXPORTS -; basic functions - zlibVersion - deflate - deflateEnd - inflate - inflateEnd -; advanced functions - deflateSetDictionary - deflateCopy - deflateReset - deflateParams - deflateTune - deflateBound - deflatePending - deflatePrime - deflateSetHeader - inflateSetDictionary - inflateGetDictionary - inflateSync - inflateCopy - inflateReset - inflateReset2 - inflatePrime - inflateMark - inflateGetHeader - inflateBack - inflateBackEnd - zlibCompileFlags -; utility functions - compress - compress2 - compressBound - uncompress - gzopen - gzdopen - gzbuffer - gzsetparams - gzread - gzwrite - gzprintf - gzvprintf - gzputs - gzgets - gzputc - gzgetc - gzungetc - gzflush - gzseek - gzrewind - gztell - gzoffset - gzeof - gzdirect - gzclose - gzclose_r - gzclose_w - gzerror - gzclearerr -; large file functions - gzopen64 - gzseek64 - gztell64 - gzoffset64 - adler32_combine64 - crc32_combine64 -; checksum functions - adler32 - crc32 - adler32_combine - crc32_combine -; various hacks, don't look :) - deflateInit_ - deflateInit2_ - inflateInit_ - inflateInit2_ - inflateBackInit_ - gzgetc_ - zError - inflateSyncPoint - get_crc_table - inflateUndermine - inflateResetKeep - deflateResetKeep - gzopen_w diff --git a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/zlib1.rc b/third_party/rust/libz-sys/src/zlib-1.2.8/win32/zlib1.rc deleted file mode 100644 index 5c0feed1b..000000000 --- a/third_party/rust/libz-sys/src/zlib-1.2.8/win32/zlib1.rc +++ /dev/null @@ -1,40 +0,0 @@ -#include <winver.h> -#include "../zlib.h" - -#ifdef GCC_WINDRES -VS_VERSION_INFO VERSIONINFO -#else -VS_VERSION_INFO VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE -#endif - FILEVERSION ZLIB_VER_MAJOR,ZLIB_VER_MINOR,ZLIB_VER_REVISION,0 - PRODUCTVERSION ZLIB_VER_MAJOR,ZLIB_VER_MINOR,ZLIB_VER_REVISION,0 - FILEFLAGSMASK VS_FFI_FILEFLAGSMASK -#ifdef _DEBUG - FILEFLAGS 1 -#else - FILEFLAGS 0 -#endif - FILEOS VOS__WINDOWS32 - FILETYPE VFT_DLL - FILESUBTYPE 0 // not used -BEGIN - BLOCK "StringFileInfo" - BEGIN - BLOCK "040904E4" - //language ID = U.S. English, char set = Windows, Multilingual - BEGIN - VALUE "FileDescription", "zlib data compression library\0" - VALUE "FileVersion", ZLIB_VERSION "\0" - VALUE "InternalName", "zlib1.dll\0" - VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0" - VALUE "OriginalFilename", "zlib1.dll\0" - VALUE "ProductName", "zlib\0" - VALUE "ProductVersion", ZLIB_VERSION "\0" - VALUE "Comments", "For more information visit http://www.zlib.net/\0" - END - END - BLOCK "VarFileInfo" - BEGIN - VALUE "Translation", 0x0409, 1252 - END -END |