1 files changed, 0 insertions, 255 deletions
diff --git a/third_party/aom/test/datarate_test.cc b/third_party/aom/test/datarate_test.cc
deleted file mode 100644
index 1588d3cc1..000000000
--- a/third_party/aom/test/datarate_test.cc
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright (c) 2016, Alliance for Open Media. All rights reserved
- *
- * This source code is subject to the terms of the BSD 2 Clause License and
- * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
- * was not distributed with this source code in the LICENSE file, you can
- * obtain it at www.aomedia.org/license/software. If the Alliance for Open
- * Media Patent License 1.0 was not distributed with this source code in the
- * PATENTS file, you can obtain it at www.aomedia.org/license/patent.
- */
-
-#include "config/aom_config.h"
-
-#include "third_party/googletest/src/googletest/include/gtest/gtest.h"
-#include "test/codec_factory.h"
-#include "test/encode_test_driver.h"
-#include "test/i420_video_source.h"
-#include "test/util.h"
-#include "test/y4m_video_source.h"
-#include "aom/aom_codec.h"
-
-namespace {
-
-class DatarateTestLarge
-    : public ::libaom_test::CodecTestWith2Params<libaom_test::TestMode, int>,
-      public ::libaom_test::EncoderTest {
- public:
-  DatarateTestLarge() : EncoderTest(GET_PARAM(0)) {}
-
- protected:
-  virtual ~DatarateTestLarge() {}
-
-  virtual void SetUp() {
-    InitializeConfig();
-    SetMode(GET_PARAM(1));
-    set_cpu_used_ = GET_PARAM(2);
-    ResetModel();
-  }
-
-  virtual void ResetModel() {
-    last_pts_ = 0;
-    bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
-    frame_number_ = 0;
-    tot_frame_number_ = 0;
-    first_drop_ = 0;
-    num_drops_ = 0;
-    // Denoiser is off by default.
-    denoiser_on_ = 0;
-    bits_total_ = 0;
-    denoiser_offon_test_ = 0;
-    denoiser_offon_period_ = -1;
-  }
-
-  virtual void PreEncodeFrameHook(::libaom_test::VideoSource *video,
-                                  ::libaom_test::Encoder *encoder) {
-    if (video->frame() == 0) encoder->Control(AOME_SET_CPUUSED, set_cpu_used_);
-
-    if (denoiser_offon_test_) {
-      ASSERT_GT(denoiser_offon_period_, 0)
-          << "denoiser_offon_period_ is not positive.";
-      if ((video->frame() + 1) % denoiser_offon_period_ == 0) {
-        // Flip denoiser_on_ periodically
-        denoiser_on_ ^= 1;
-      }
-    }
-
-    encoder->Control(AV1E_SET_NOISE_SENSITIVITY, denoiser_on_);
-
-    const aom_rational_t tb = video->timebase();
-    timebase_ = static_cast<double>(tb.num) / tb.den;
-    duration_ = 0;
-  }
-
-  virtual void FramePktHook(const aom_codec_cx_pkt_t *pkt) {
-    // Time since last timestamp = duration.
-    aom_codec_pts_t duration = pkt->data.frame.pts - last_pts_;
-
-    if (duration > 1) {
-      // If first drop not set and we have a drop set it to this time.
-      if (!first_drop_) first_drop_ = last_pts_ + 1;
-      // Update the number of frame drops.
-      num_drops_ += static_cast<int>(duration - 1);
-      // Update counter for total number of frames (#frames input to encoder).
-      // Needed for setting the proper layer_id below.
-      tot_frame_number_ += static_cast<int>(duration - 1);
-    }
-
-    // Add to the buffer the bits we'd expect from a constant bitrate server.
-    bits_in_buffer_model_ += static_cast<int64_t>(
-        duration * timebase_ * cfg_.rc_target_bitrate * 1000);
-
-    // Buffer should not go negative.
-    ASSERT_GE(bits_in_buffer_model_, 0)
-        << "Buffer Underrun at frame " << pkt->data.frame.pts;
-
-    const size_t frame_size_in_bits = pkt->data.frame.sz * 8;
-
-    // Update the total encoded bits.
-    bits_total_ += frame_size_in_bits;
-
-    // Update the most recent pts.
-    last_pts_ = pkt->data.frame.pts;
-    ++frame_number_;
-    ++tot_frame_number_;
-  }
-
-  virtual void EndPassHook(void) {
-    duration_ = (last_pts_ + 1) * timebase_;
-    // Effective file datarate:
-    effective_datarate_ = (bits_total_ / 1000.0) / duration_;
-  }
-
-  aom_codec_pts_t last_pts_;
-  double timebase_;
-  int frame_number_;      // Counter for number of non-dropped/encoded frames.
-  int tot_frame_number_;  // Counter for total number of input frames.
-  int64_t bits_total_;
-  double duration_;
-  double effective_datarate_;
-  int set_cpu_used_;
-  int64_t bits_in_buffer_model_;
-  aom_codec_pts_t first_drop_;
-  int num_drops_;
-  int denoiser_on_;
-  int denoiser_offon_test_;
-  int denoiser_offon_period_;
-};
-
-// Check basic rate targeting for VBR mode.
-TEST_P(DatarateTestLarge, BasicRateTargetingVBR) {
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.g_error_resilient = 0;
-  cfg_.rc_end_usage = AOM_VBR;
-  cfg_.g_lag_in_frames = 0;
-
-  ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
-                                       30, 1, 0, 140);
-  for (int i = 400; i <= 800; i += 400) {
-    cfg_.rc_target_bitrate = i;
-    ResetModel();
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.75)
-        << " The datarate for the file is lower than target by too much!";
-    ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.25)
-        << " The datarate for the file is greater than target by too much!";
-  }
-}
-
-// Check basic rate targeting for CBR,
-TEST_P(DatarateTestLarge, BasicRateTargeting) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_dropframe_thresh = 1;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.rc_end_usage = AOM_CBR;
-  cfg_.g_lag_in_frames = 0;
-
-  ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
-                                       30, 1, 0, 140);
-  for (int i = 150; i < 800; i += 400) {
-    cfg_.rc_target_bitrate = i;
-    ResetModel();
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85)
-        << " The datarate for the file is lower than target by too much!";
-    ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15)
-        << " The datarate for the file is greater than target by too much!";
-  }
-}
-
-// Check basic rate targeting for CBR.
-TEST_P(DatarateTestLarge, BasicRateTargeting444) {
-  ::libaom_test::Y4mVideoSource video("rush_hour_444.y4m", 0, 140);
-
-  cfg_.g_profile = 1;
-  cfg_.g_timebase = video.timebase();
-
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_dropframe_thresh = 1;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.rc_end_usage = AOM_CBR;
-
-  for (int i = 250; i < 900; i += 400) {
-    cfg_.rc_target_bitrate = i;
-    ResetModel();
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(static_cast<double>(cfg_.rc_target_bitrate),
-              effective_datarate_ * 0.85)
-        << " The datarate for the file exceeds the target by too much!";
-    ASSERT_LE(static_cast<double>(cfg_.rc_target_bitrate),
-              effective_datarate_ * 1.15)
-        << " The datarate for the file missed the target!"
-        << cfg_.rc_target_bitrate << " " << effective_datarate_;
-  }
-}
-
-// Check that (1) the first dropped frame gets earlier and earlier
-// as the drop frame threshold is increased, and (2) that the total number of
-// frame drops does not decrease as we increase frame drop threshold.
-// Use a lower qp-max to force some frame drops.
-TEST_P(DatarateTestLarge, ChangingDropFrameThresh) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_undershoot_pct = 20;
-  cfg_.rc_undershoot_pct = 20;
-  cfg_.rc_dropframe_thresh = 10;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 50;
-  cfg_.rc_end_usage = AOM_CBR;
-  cfg_.rc_target_bitrate = 200;
-  cfg_.g_lag_in_frames = 0;
-  cfg_.g_error_resilient = 1;
-  // TODO(marpan): Investigate datarate target failures with a smaller keyframe
-  // interval (128).
-  cfg_.kf_max_dist = 9999;
-
-  ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
-                                       30, 1, 0, 100);
-
-  const int kDropFrameThreshTestStep = 30;
-  aom_codec_pts_t last_drop = 140;
-  int last_num_drops = 0;
-  for (int i = 40; i < 100; i += kDropFrameThreshTestStep) {
-    cfg_.rc_dropframe_thresh = i;
-    ResetModel();
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85)
-        << " The datarate for the file is lower than target by too much!";
-    ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15)
-        << " The datarate for the file is greater than target by too much!";
-    ASSERT_LE(first_drop_, last_drop)
-        << " The first dropped frame for drop_thresh " << i
-        << " > first dropped frame for drop_thresh "
-        << i - kDropFrameThreshTestStep;
-    ASSERT_GE(num_drops_, last_num_drops * 0.85)
-        << " The number of dropped frames for drop_thresh " << i
-        << " < number of dropped frames for drop_thresh "
-        << i - kDropFrameThreshTestStep;
-    last_drop = first_drop_;
-    last_num_drops = num_drops_;
-  }
-}
-
-AV1_INSTANTIATE_TEST_CASE(DatarateTestLarge,
-                          ::testing::Values(::libaom_test::kOnePassGood,
-                                            ::libaom_test::kRealTime),
-                          ::testing::Values(2, 5));
-}  // namespace