1 files changed, 255 insertions, 0 deletions
diff --git a/third_party/aom/test/datarate_test.cc b/third_party/aom/test/datarate_test.cc
new file mode 100644
index 000000000..1588d3cc1
--- /dev/null
+++ b/third_party/aom/test/datarate_test.cc
@@ -0,0 +1,255 @@
+/*
+ * Copyright (c) 2016, Alliance for Open Media. All rights reserved
+ *
+ * This source code is subject to the terms of the BSD 2 Clause License and
+ * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
+ * was not distributed with this source code in the LICENSE file, you can
+ * obtain it at www.aomedia.org/license/software. If the Alliance for Open
+ * Media Patent License 1.0 was not distributed with this source code in the
+ * PATENTS file, you can obtain it at www.aomedia.org/license/patent.
+ */
+
+#include "config/aom_config.h"
+
+#include "third_party/googletest/src/googletest/include/gtest/gtest.h"
+#include "test/codec_factory.h"
+#include "test/encode_test_driver.h"
+#include "test/i420_video_source.h"
+#include "test/util.h"
+#include "test/y4m_video_source.h"
+#include "aom/aom_codec.h"
+
+namespace {
+
+class DatarateTestLarge
+    : public ::libaom_test::CodecTestWith2Params<libaom_test::TestMode, int>,
+      public ::libaom_test::EncoderTest {
+ public:
+  DatarateTestLarge() : EncoderTest(GET_PARAM(0)) {}
+
+ protected:
+  virtual ~DatarateTestLarge() {}
+
+  virtual void SetUp() {
+    InitializeConfig();
+    SetMode(GET_PARAM(1));
+    set_cpu_used_ = GET_PARAM(2);
+    ResetModel();
+  }
+
+  virtual void ResetModel() {
+    last_pts_ = 0;
+    bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
+    frame_number_ = 0;
+    tot_frame_number_ = 0;
+    first_drop_ = 0;
+    num_drops_ = 0;
+    // Denoiser is off by default.
+    denoiser_on_ = 0;
+    bits_total_ = 0;
+    denoiser_offon_test_ = 0;
+    denoiser_offon_period_ = -1;
+  }
+
+  virtual void PreEncodeFrameHook(::libaom_test::VideoSource *video,
+                                  ::libaom_test::Encoder *encoder) {
+    if (video->frame() == 0) encoder->Control(AOME_SET_CPUUSED, set_cpu_used_);
+
+    if (denoiser_offon_test_) {
+      ASSERT_GT(denoiser_offon_period_, 0)
+          << "denoiser_offon_period_ is not positive.";
+      if ((video->frame() + 1) % denoiser_offon_period_ == 0) {
+        // Flip denoiser_on_ periodically
+        denoiser_on_ ^= 1;
+      }
+    }
+
+    encoder->Control(AV1E_SET_NOISE_SENSITIVITY, denoiser_on_);
+
+    const aom_rational_t tb = video->timebase();
+    timebase_ = static_cast<double>(tb.num) / tb.den;
+    duration_ = 0;
+  }
+
+  virtual void FramePktHook(const aom_codec_cx_pkt_t *pkt) {
+    // Time since last timestamp = duration.
+    aom_codec_pts_t duration = pkt->data.frame.pts - last_pts_;
+
+    if (duration > 1) {
+      // If first drop not set and we have a drop set it to this time.
+      if (!first_drop_) first_drop_ = last_pts_ + 1;
+      // Update the number of frame drops.
+      num_drops_ += static_cast<int>(duration - 1);
+      // Update counter for total number of frames (#frames input to encoder).
+      // Needed for setting the proper layer_id below.
+      tot_frame_number_ += static_cast<int>(duration - 1);
+    }
+
+    // Add to the buffer the bits we'd expect from a constant bitrate server.
+    bits_in_buffer_model_ += static_cast<int64_t>(
+        duration * timebase_ * cfg_.rc_target_bitrate * 1000);
+
+    // Buffer should not go negative.
+    ASSERT_GE(bits_in_buffer_model_, 0)
+        << "Buffer Underrun at frame " << pkt->data.frame.pts;
+
+    const size_t frame_size_in_bits = pkt->data.frame.sz * 8;
+
+    // Update the total encoded bits.
+    bits_total_ += frame_size_in_bits;
+
+    // Update the most recent pts.
+    last_pts_ = pkt->data.frame.pts;
+    ++frame_number_;
+    ++tot_frame_number_;
+  }
+
+  virtual void EndPassHook(void) {
+    duration_ = (last_pts_ + 1) * timebase_;
+    // Effective file datarate:
+    effective_datarate_ = (bits_total_ / 1000.0) / duration_;
+  }
+
+  aom_codec_pts_t last_pts_;
+  double timebase_;
+  int frame_number_;      // Counter for number of non-dropped/encoded frames.
+  int tot_frame_number_;  // Counter for total number of input frames.
+  int64_t bits_total_;
+  double duration_;
+  double effective_datarate_;
+  int set_cpu_used_;
+  int64_t bits_in_buffer_model_;
+  aom_codec_pts_t first_drop_;
+  int num_drops_;
+  int denoiser_on_;
+  int denoiser_offon_test_;
+  int denoiser_offon_period_;
+};
+
+// Check basic rate targeting for VBR mode.
+TEST_P(DatarateTestLarge, BasicRateTargetingVBR) {
+  cfg_.rc_min_quantizer = 0;
+  cfg_.rc_max_quantizer = 63;
+  cfg_.g_error_resilient = 0;
+  cfg_.rc_end_usage = AOM_VBR;
+  cfg_.g_lag_in_frames = 0;
+
+  ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
+                                       30, 1, 0, 140);
+  for (int i = 400; i <= 800; i += 400) {
+    cfg_.rc_target_bitrate = i;
+    ResetModel();
+    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
+    ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.75)
+        << " The datarate for the file is lower than target by too much!";
+    ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.25)
+        << " The datarate for the file is greater than target by too much!";
+  }
+}
+
+// Check basic rate targeting for CBR,
+TEST_P(DatarateTestLarge, BasicRateTargeting) {
+  cfg_.rc_buf_initial_sz = 500;
+  cfg_.rc_buf_optimal_sz = 500;
+  cfg_.rc_buf_sz = 1000;
+  cfg_.rc_dropframe_thresh = 1;
+  cfg_.rc_min_quantizer = 0;
+  cfg_.rc_max_quantizer = 63;
+  cfg_.rc_end_usage = AOM_CBR;
+  cfg_.g_lag_in_frames = 0;
+
+  ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
+                                       30, 1, 0, 140);
+  for (int i = 150; i < 800; i += 400) {
+    cfg_.rc_target_bitrate = i;
+    ResetModel();
+    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
+    ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85)
+        << " The datarate for the file is lower than target by too much!";
+    ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15)
+        << " The datarate for the file is greater than target by too much!";
+  }
+}
+
+// Check basic rate targeting for CBR.
+TEST_P(DatarateTestLarge, BasicRateTargeting444) {
+  ::libaom_test::Y4mVideoSource video("rush_hour_444.y4m", 0, 140);
+
+  cfg_.g_profile = 1;
+  cfg_.g_timebase = video.timebase();
+
+  cfg_.rc_buf_initial_sz = 500;
+  cfg_.rc_buf_optimal_sz = 500;
+  cfg_.rc_buf_sz = 1000;
+  cfg_.rc_dropframe_thresh = 1;
+  cfg_.rc_min_quantizer = 0;
+  cfg_.rc_max_quantizer = 63;
+  cfg_.rc_end_usage = AOM_CBR;
+
+  for (int i = 250; i < 900; i += 400) {
+    cfg_.rc_target_bitrate = i;
+    ResetModel();
+    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
+    ASSERT_GE(static_cast<double>(cfg_.rc_target_bitrate),
+              effective_datarate_ * 0.85)
+        << " The datarate for the file exceeds the target by too much!";
+    ASSERT_LE(static_cast<double>(cfg_.rc_target_bitrate),
+              effective_datarate_ * 1.15)
+        << " The datarate for the file missed the target!"
+        << cfg_.rc_target_bitrate << " " << effective_datarate_;
+  }
+}
+
+// Check that (1) the first dropped frame gets earlier and earlier
+// as the drop frame threshold is increased, and (2) that the total number of
+// frame drops does not decrease as we increase frame drop threshold.
+// Use a lower qp-max to force some frame drops.
+TEST_P(DatarateTestLarge, ChangingDropFrameThresh) {
+  cfg_.rc_buf_initial_sz = 500;
+  cfg_.rc_buf_optimal_sz = 500;
+  cfg_.rc_buf_sz = 1000;
+  cfg_.rc_undershoot_pct = 20;
+  cfg_.rc_undershoot_pct = 20;
+  cfg_.rc_dropframe_thresh = 10;
+  cfg_.rc_min_quantizer = 0;
+  cfg_.rc_max_quantizer = 50;
+  cfg_.rc_end_usage = AOM_CBR;
+  cfg_.rc_target_bitrate = 200;
+  cfg_.g_lag_in_frames = 0;
+  cfg_.g_error_resilient = 1;
+  // TODO(marpan): Investigate datarate target failures with a smaller keyframe
+  // interval (128).
+  cfg_.kf_max_dist = 9999;
+
+  ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
+                                       30, 1, 0, 100);
+
+  const int kDropFrameThreshTestStep = 30;
+  aom_codec_pts_t last_drop = 140;
+  int last_num_drops = 0;
+  for (int i = 40; i < 100; i += kDropFrameThreshTestStep) {
+    cfg_.rc_dropframe_thresh = i;
+    ResetModel();
+    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
+    ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85)
+        << " The datarate for the file is lower than target by too much!";
+    ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15)
+        << " The datarate for the file is greater than target by too much!";
+    ASSERT_LE(first_drop_, last_drop)
+        << " The first dropped frame for drop_thresh " << i
+        << " > first dropped frame for drop_thresh "
+        << i - kDropFrameThreshTestStep;
+    ASSERT_GE(num_drops_, last_num_drops * 0.85)
+        << " The number of dropped frames for drop_thresh " << i
+        << " < number of dropped frames for drop_thresh "
+        << i - kDropFrameThreshTestStep;
+    last_drop = first_drop_;
+    last_num_drops = num_drops_;
+  }
+}
+
+AV1_INSTANTIATE_TEST_CASE(DatarateTestLarge,
+                          ::testing::Values(::libaom_test::kOnePassGood,
+                                            ::libaom_test::kRealTime),
+                          ::testing::Values(2, 5));
+}  // namespace