diff options
Diffstat (limited to 'memory/jemalloc/src/bin')
-rw-r--r-- | memory/jemalloc/src/bin/jemalloc-config.in | 79 | ||||
-rw-r--r-- | memory/jemalloc/src/bin/jemalloc.sh.in | 9 | ||||
-rw-r--r-- | memory/jemalloc/src/bin/jeprof.in | 5611 |
3 files changed, 5699 insertions, 0 deletions
diff --git a/memory/jemalloc/src/bin/jemalloc-config.in b/memory/jemalloc/src/bin/jemalloc-config.in new file mode 100644 index 000000000..b016c8d33 --- /dev/null +++ b/memory/jemalloc/src/bin/jemalloc-config.in @@ -0,0 +1,79 @@ +#!/bin/sh + +usage() { + cat <<EOF +Usage: + @BINDIR@/jemalloc-config <option> +Options: + --help | -h : Print usage. + --version : Print jemalloc version. + --revision : Print shared library revision number. + --config : Print configure options used to build jemalloc. + --prefix : Print installation directory prefix. + --bindir : Print binary installation directory. + --datadir : Print data installation directory. + --includedir : Print include installation directory. + --libdir : Print library installation directory. + --mandir : Print manual page installation directory. + --cc : Print compiler used to build jemalloc. + --cflags : Print compiler flags used to build jemalloc. + --cppflags : Print preprocessor flags used to build jemalloc. + --ldflags : Print library flags used to build jemalloc. + --libs : Print libraries jemalloc was linked against. +EOF +} + +prefix="@prefix@" +exec_prefix="@exec_prefix@" + +case "$1" in +--help | -h) + usage + exit 0 + ;; +--version) + echo "@jemalloc_version@" + ;; +--revision) + echo "@rev@" + ;; +--config) + echo "@CONFIG@" + ;; +--prefix) + echo "@PREFIX@" + ;; +--bindir) + echo "@BINDIR@" + ;; +--datadir) + echo "@DATADIR@" + ;; +--includedir) + echo "@INCLUDEDIR@" + ;; +--libdir) + echo "@LIBDIR@" + ;; +--mandir) + echo "@MANDIR@" + ;; +--cc) + echo "@CC@" + ;; +--cflags) + echo "@CFLAGS@" + ;; +--cppflags) + echo "@CPPFLAGS@" + ;; +--ldflags) + echo "@LDFLAGS@ @EXTRA_LDFLAGS@" + ;; +--libs) + echo "@LIBS@" + ;; +*) + usage + exit 1 +esac diff --git a/memory/jemalloc/src/bin/jemalloc.sh.in b/memory/jemalloc/src/bin/jemalloc.sh.in new file mode 100644 index 000000000..cdf367375 --- /dev/null +++ b/memory/jemalloc/src/bin/jemalloc.sh.in @@ -0,0 +1,9 @@ +#!/bin/sh + +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ + +@LD_PRELOAD_VAR@=${libdir}/libjemalloc.@SOREV@ +export @LD_PRELOAD_VAR@ +exec "$@" diff --git a/memory/jemalloc/src/bin/jeprof.in b/memory/jemalloc/src/bin/jeprof.in new file mode 100644 index 000000000..42087fcec --- /dev/null +++ b/memory/jemalloc/src/bin/jeprof.in @@ -0,0 +1,5611 @@ +#! /usr/bin/env perl + +# Copyright (c) 1998-2007, Google Inc. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following disclaimer +# in the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Google Inc. nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# --- +# Program for printing the profile generated by common/profiler.cc, +# or by the heap profiler (common/debugallocation.cc) +# +# The profile contains a sequence of entries of the form: +# <count> <stack trace> +# This program parses the profile, and generates user-readable +# output. +# +# Examples: +# +# % tools/jeprof "program" "profile" +# Enters "interactive" mode +# +# % tools/jeprof --text "program" "profile" +# Generates one line per procedure +# +# % tools/jeprof --gv "program" "profile" +# Generates annotated call-graph and displays via "gv" +# +# % tools/jeprof --gv --focus=Mutex "program" "profile" +# Restrict to code paths that involve an entry that matches "Mutex" +# +# % tools/jeprof --gv --focus=Mutex --ignore=string "program" "profile" +# Restrict to code paths that involve an entry that matches "Mutex" +# and does not match "string" +# +# % tools/jeprof --list=IBF_CheckDocid "program" "profile" +# Generates disassembly listing of all routines with at least one +# sample that match the --list=<regexp> pattern. The listing is +# annotated with the flat and cumulative sample counts at each line. +# +# % tools/jeprof --disasm=IBF_CheckDocid "program" "profile" +# Generates disassembly listing of all routines with at least one +# sample that match the --disasm=<regexp> pattern. The listing is +# annotated with the flat and cumulative sample counts at each PC value. +# +# TODO: Use color to indicate files? + +use strict; +use warnings; +use Getopt::Long; + +my $JEPROF_VERSION = "@jemalloc_version@"; +my $PPROF_VERSION = "2.0"; + +# These are the object tools we use which can come from a +# user-specified location using --tools, from the JEPROF_TOOLS +# environment variable, or from the environment. +my %obj_tool_map = ( + "objdump" => "objdump", + "nm" => "nm", + "addr2line" => "addr2line", + "c++filt" => "c++filt", + ## ConfigureObjTools may add architecture-specific entries: + #"nm_pdb" => "nm-pdb", # for reading windows (PDB-format) executables + #"addr2line_pdb" => "addr2line-pdb", # ditto + #"otool" => "otool", # equivalent of objdump on OS X +); +# NOTE: these are lists, so you can put in commandline flags if you want. +my @DOT = ("dot"); # leave non-absolute, since it may be in /usr/local +my @GV = ("gv"); +my @EVINCE = ("evince"); # could also be xpdf or perhaps acroread +my @KCACHEGRIND = ("kcachegrind"); +my @PS2PDF = ("ps2pdf"); +# These are used for dynamic profiles +my @URL_FETCHER = ("curl", "-s", "--fail"); + +# These are the web pages that servers need to support for dynamic profiles +my $HEAP_PAGE = "/pprof/heap"; +my $PROFILE_PAGE = "/pprof/profile"; # must support cgi-param "?seconds=#" +my $PMUPROFILE_PAGE = "/pprof/pmuprofile(?:\\?.*)?"; # must support cgi-param + # ?seconds=#&event=x&period=n +my $GROWTH_PAGE = "/pprof/growth"; +my $CONTENTION_PAGE = "/pprof/contention"; +my $WALL_PAGE = "/pprof/wall(?:\\?.*)?"; # accepts options like namefilter +my $FILTEREDPROFILE_PAGE = "/pprof/filteredprofile(?:\\?.*)?"; +my $CENSUSPROFILE_PAGE = "/pprof/censusprofile(?:\\?.*)?"; # must support cgi-param + # "?seconds=#", + # "?tags_regexp=#" and + # "?type=#". +my $SYMBOL_PAGE = "/pprof/symbol"; # must support symbol lookup via POST +my $PROGRAM_NAME_PAGE = "/pprof/cmdline"; + +# These are the web pages that can be named on the command line. +# All the alternatives must begin with /. +my $PROFILES = "($HEAP_PAGE|$PROFILE_PAGE|$PMUPROFILE_PAGE|" . + "$GROWTH_PAGE|$CONTENTION_PAGE|$WALL_PAGE|" . + "$FILTEREDPROFILE_PAGE|$CENSUSPROFILE_PAGE)"; + +# default binary name +my $UNKNOWN_BINARY = "(unknown)"; + +# There is a pervasive dependency on the length (in hex characters, +# i.e., nibbles) of an address, distinguishing between 32-bit and +# 64-bit profiles. To err on the safe size, default to 64-bit here: +my $address_length = 16; + +my $dev_null = "/dev/null"; +if (! -e $dev_null && $^O =~ /MSWin/) { # $^O is the OS perl was built for + $dev_null = "nul"; +} + +# A list of paths to search for shared object files +my @prefix_list = (); + +# Special routine name that should not have any symbols. +# Used as separator to parse "addr2line -i" output. +my $sep_symbol = '_fini'; +my $sep_address = undef; + +##### Argument parsing ##### + +sub usage_string { + return <<EOF; +Usage: +jeprof [options] <program> <profiles> + <profiles> is a space separated list of profile names. +jeprof [options] <symbolized-profiles> + <symbolized-profiles> is a list of profile files where each file contains + the necessary symbol mappings as well as profile data (likely generated + with --raw). +jeprof [options] <profile> + <profile> is a remote form. Symbols are obtained from host:port$SYMBOL_PAGE + + Each name can be: + /path/to/profile - a path to a profile file + host:port[/<service>] - a location of a service to get profile from + + The /<service> can be $HEAP_PAGE, $PROFILE_PAGE, /pprof/pmuprofile, + $GROWTH_PAGE, $CONTENTION_PAGE, /pprof/wall, + $CENSUSPROFILE_PAGE, or /pprof/filteredprofile. + For instance: + jeprof http://myserver.com:80$HEAP_PAGE + If /<service> is omitted, the service defaults to $PROFILE_PAGE (cpu profiling). +jeprof --symbols <program> + Maps addresses to symbol names. In this mode, stdin should be a + list of library mappings, in the same format as is found in the heap- + and cpu-profile files (this loosely matches that of /proc/self/maps + on linux), followed by a list of hex addresses to map, one per line. + + For more help with querying remote servers, including how to add the + necessary server-side support code, see this filename (or one like it): + + /usr/doc/gperftools-$PPROF_VERSION/pprof_remote_servers.html + +Options: + --cum Sort by cumulative data + --base=<base> Subtract <base> from <profile> before display + --interactive Run in interactive mode (interactive "help" gives help) [default] + --seconds=<n> Length of time for dynamic profiles [default=30 secs] + --add_lib=<file> Read additional symbols and line info from the given library + --lib_prefix=<dir> Comma separated list of library path prefixes + +Reporting Granularity: + --addresses Report at address level + --lines Report at source line level + --functions Report at function level [default] + --files Report at source file level + +Output type: + --text Generate text report + --callgrind Generate callgrind format to stdout + --gv Generate Postscript and display + --evince Generate PDF and display + --web Generate SVG and display + --list=<regexp> Generate source listing of matching routines + --disasm=<regexp> Generate disassembly of matching routines + --symbols Print demangled symbol names found at given addresses + --dot Generate DOT file to stdout + --ps Generate Postcript to stdout + --pdf Generate PDF to stdout + --svg Generate SVG to stdout + --gif Generate GIF to stdout + --raw Generate symbolized jeprof data (useful with remote fetch) + +Heap-Profile Options: + --inuse_space Display in-use (mega)bytes [default] + --inuse_objects Display in-use objects + --alloc_space Display allocated (mega)bytes + --alloc_objects Display allocated objects + --show_bytes Display space in bytes + --drop_negative Ignore negative differences + +Contention-profile options: + --total_delay Display total delay at each region [default] + --contentions Display number of delays at each region + --mean_delay Display mean delay at each region + +Call-graph Options: + --nodecount=<n> Show at most so many nodes [default=80] + --nodefraction=<f> Hide nodes below <f>*total [default=.005] + --edgefraction=<f> Hide edges below <f>*total [default=.001] + --maxdegree=<n> Max incoming/outgoing edges per node [default=8] + --focus=<regexp> Focus on backtraces with nodes matching <regexp> + --thread=<n> Show profile for thread <n> + --ignore=<regexp> Ignore backtraces with nodes matching <regexp> + --scale=<n> Set GV scaling [default=0] + --heapcheck Make nodes with non-0 object counts + (i.e. direct leak generators) more visible + --retain=<regexp> Retain only nodes that match <regexp> + --exclude=<regexp> Exclude all nodes that match <regexp> + +Miscellaneous: + --tools=<prefix or binary:fullpath>[,...] \$PATH for object tool pathnames + --test Run unit tests + --help This message + --version Version information + +Environment Variables: + JEPROF_TMPDIR Profiles directory. Defaults to \$HOME/jeprof + JEPROF_TOOLS Prefix for object tools pathnames + +Examples: + +jeprof /bin/ls ls.prof + Enters "interactive" mode +jeprof --text /bin/ls ls.prof + Outputs one line per procedure +jeprof --web /bin/ls ls.prof + Displays annotated call-graph in web browser +jeprof --gv /bin/ls ls.prof + Displays annotated call-graph via 'gv' +jeprof --gv --focus=Mutex /bin/ls ls.prof + Restricts to code paths including a .*Mutex.* entry +jeprof --gv --focus=Mutex --ignore=string /bin/ls ls.prof + Code paths including Mutex but not string +jeprof --list=getdir /bin/ls ls.prof + (Per-line) annotated source listing for getdir() +jeprof --disasm=getdir /bin/ls ls.prof + (Per-PC) annotated disassembly for getdir() + +jeprof http://localhost:1234/ + Enters "interactive" mode +jeprof --text localhost:1234 + Outputs one line per procedure for localhost:1234 +jeprof --raw localhost:1234 > ./local.raw +jeprof --text ./local.raw + Fetches a remote profile for later analysis and then + analyzes it in text mode. +EOF +} + +sub version_string { + return <<EOF +jeprof (part of jemalloc $JEPROF_VERSION) +based on pprof (part of gperftools $PPROF_VERSION) + +Copyright 1998-2007 Google Inc. + +This is BSD licensed software; see the source for copying conditions +and license information. +There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A +PARTICULAR PURPOSE. +EOF +} + +sub usage { + my $msg = shift; + print STDERR "$msg\n\n"; + print STDERR usage_string(); + print STDERR "\nFATAL ERROR: $msg\n"; # just as a reminder + exit(1); +} + +sub Init() { + # Setup tmp-file name and handler to clean it up. + # We do this in the very beginning so that we can use + # error() and cleanup() function anytime here after. + $main::tmpfile_sym = "/tmp/jeprof$$.sym"; + $main::tmpfile_ps = "/tmp/jeprof$$"; + $main::next_tmpfile = 0; + $SIG{'INT'} = \&sighandler; + + # Cache from filename/linenumber to source code + $main::source_cache = (); + + $main::opt_help = 0; + $main::opt_version = 0; + + $main::opt_cum = 0; + $main::opt_base = ''; + $main::opt_addresses = 0; + $main::opt_lines = 0; + $main::opt_functions = 0; + $main::opt_files = 0; + $main::opt_lib_prefix = ""; + + $main::opt_text = 0; + $main::opt_callgrind = 0; + $main::opt_list = ""; + $main::opt_disasm = ""; + $main::opt_symbols = 0; + $main::opt_gv = 0; + $main::opt_evince = 0; + $main::opt_web = 0; + $main::opt_dot = 0; + $main::opt_ps = 0; + $main::opt_pdf = 0; + $main::opt_gif = 0; + $main::opt_svg = 0; + $main::opt_raw = 0; + + $main::opt_nodecount = 80; + $main::opt_nodefraction = 0.005; + $main::opt_edgefraction = 0.001; + $main::opt_maxdegree = 8; + $main::opt_focus = ''; + $main::opt_thread = undef; + $main::opt_ignore = ''; + $main::opt_scale = 0; + $main::opt_heapcheck = 0; + $main::opt_retain = ''; + $main::opt_exclude = ''; + $main::opt_seconds = 30; + $main::opt_lib = ""; + + $main::opt_inuse_space = 0; + $main::opt_inuse_objects = 0; + $main::opt_alloc_space = 0; + $main::opt_alloc_objects = 0; + $main::opt_show_bytes = 0; + $main::opt_drop_negative = 0; + $main::opt_interactive = 0; + + $main::opt_total_delay = 0; + $main::opt_contentions = 0; + $main::opt_mean_delay = 0; + + $main::opt_tools = ""; + $main::opt_debug = 0; + $main::opt_test = 0; + + # These are undocumented flags used only by unittests. + $main::opt_test_stride = 0; + + # Are we using $SYMBOL_PAGE? + $main::use_symbol_page = 0; + + # Files returned by TempName. + %main::tempnames = (); + + # Type of profile we are dealing with + # Supported types: + # cpu + # heap + # growth + # contention + $main::profile_type = ''; # Empty type means "unknown" + + GetOptions("help!" => \$main::opt_help, + "version!" => \$main::opt_version, + "cum!" => \$main::opt_cum, + "base=s" => \$main::opt_base, + "seconds=i" => \$main::opt_seconds, + "add_lib=s" => \$main::opt_lib, + "lib_prefix=s" => \$main::opt_lib_prefix, + "functions!" => \$main::opt_functions, + "lines!" => \$main::opt_lines, + "addresses!" => \$main::opt_addresses, + "files!" => \$main::opt_files, + "text!" => \$main::opt_text, + "callgrind!" => \$main::opt_callgrind, + "list=s" => \$main::opt_list, + "disasm=s" => \$main::opt_disasm, + "symbols!" => \$main::opt_symbols, + "gv!" => \$main::opt_gv, + "evince!" => \$main::opt_evince, + "web!" => \$main::opt_web, + "dot!" => \$main::opt_dot, + "ps!" => \$main::opt_ps, + "pdf!" => \$main::opt_pdf, + "svg!" => \$main::opt_svg, + "gif!" => \$main::opt_gif, + "raw!" => \$main::opt_raw, + "interactive!" => \$main::opt_interactive, + "nodecount=i" => \$main::opt_nodecount, + "nodefraction=f" => \$main::opt_nodefraction, + "edgefraction=f" => \$main::opt_edgefraction, + "maxdegree=i" => \$main::opt_maxdegree, + "focus=s" => \$main::opt_focus, + "thread=s" => \$main::opt_thread, + "ignore=s" => \$main::opt_ignore, + "scale=i" => \$main::opt_scale, + "heapcheck" => \$main::opt_heapcheck, + "retain=s" => \$main::opt_retain, + "exclude=s" => \$main::opt_exclude, + "inuse_space!" => \$main::opt_inuse_space, + "inuse_objects!" => \$main::opt_inuse_objects, + "alloc_space!" => \$main::opt_alloc_space, + "alloc_objects!" => \$main::opt_alloc_objects, + "show_bytes!" => \$main::opt_show_bytes, + "drop_negative!" => \$main::opt_drop_negative, + "total_delay!" => \$main::opt_total_delay, + "contentions!" => \$main::opt_contentions, + "mean_delay!" => \$main::opt_mean_delay, + "tools=s" => \$main::opt_tools, + "test!" => \$main::opt_test, + "debug!" => \$main::opt_debug, + # Undocumented flags used only by unittests: + "test_stride=i" => \$main::opt_test_stride, + ) || usage("Invalid option(s)"); + + # Deal with the standard --help and --version + if ($main::opt_help) { + print usage_string(); + exit(0); + } + + if ($main::opt_version) { + print version_string(); + exit(0); + } + + # Disassembly/listing/symbols mode requires address-level info + if ($main::opt_disasm || $main::opt_list || $main::opt_symbols) { + $main::opt_functions = 0; + $main::opt_lines = 0; + $main::opt_addresses = 1; + $main::opt_files = 0; + } + + # Check heap-profiling flags + if ($main::opt_inuse_space + + $main::opt_inuse_objects + + $main::opt_alloc_space + + $main::opt_alloc_objects > 1) { + usage("Specify at most on of --inuse/--alloc options"); + } + + # Check output granularities + my $grains = + $main::opt_functions + + $main::opt_lines + + $main::opt_addresses + + $main::opt_files + + 0; + if ($grains > 1) { + usage("Only specify one output granularity option"); + } + if ($grains == 0) { + $main::opt_functions = 1; + } + + # Check output modes + my $modes = + $main::opt_text + + $main::opt_callgrind + + ($main::opt_list eq '' ? 0 : 1) + + ($main::opt_disasm eq '' ? 0 : 1) + + ($main::opt_symbols == 0 ? 0 : 1) + + $main::opt_gv + + $main::opt_evince + + $main::opt_web + + $main::opt_dot + + $main::opt_ps + + $main::opt_pdf + + $main::opt_svg + + $main::opt_gif + + $main::opt_raw + + $main::opt_interactive + + 0; + if ($modes > 1) { + usage("Only specify one output mode"); + } + if ($modes == 0) { + if (-t STDOUT) { # If STDOUT is a tty, activate interactive mode + $main::opt_interactive = 1; + } else { + $main::opt_text = 1; + } + } + + if ($main::opt_test) { + RunUnitTests(); + # Should not return + exit(1); + } + + # Binary name and profile arguments list + $main::prog = ""; + @main::pfile_args = (); + + # Remote profiling without a binary (using $SYMBOL_PAGE instead) + if (@ARGV > 0) { + if (IsProfileURL($ARGV[0])) { + $main::use_symbol_page = 1; + } elsif (IsSymbolizedProfileFile($ARGV[0])) { + $main::use_symbolized_profile = 1; + $main::prog = $UNKNOWN_BINARY; # will be set later from the profile file + } + } + + if ($main::use_symbol_page || $main::use_symbolized_profile) { + # We don't need a binary! + my %disabled = ('--lines' => $main::opt_lines, + '--disasm' => $main::opt_disasm); + for my $option (keys %disabled) { + usage("$option cannot be used without a binary") if $disabled{$option}; + } + # Set $main::prog later... + scalar(@ARGV) || usage("Did not specify profile file"); + } elsif ($main::opt_symbols) { + # --symbols needs a binary-name (to run nm on, etc) but not profiles + $main::prog = shift(@ARGV) || usage("Did not specify program"); + } else { + $main::prog = shift(@ARGV) || usage("Did not specify program"); + scalar(@ARGV) || usage("Did not specify profile file"); + } + + # Parse profile file/location arguments + foreach my $farg (@ARGV) { + if ($farg =~ m/(.*)\@([0-9]+)(|\/.*)$/ ) { + my $machine = $1; + my $num_machines = $2; + my $path = $3; + for (my $i = 0; $i < $num_machines; $i++) { + unshift(@main::pfile_args, "$i.$machine$path"); + } + } else { + unshift(@main::pfile_args, $farg); + } + } + + if ($main::use_symbol_page) { + unless (IsProfileURL($main::pfile_args[0])) { + error("The first profile should be a remote form to use $SYMBOL_PAGE\n"); + } + CheckSymbolPage(); + $main::prog = FetchProgramName(); + } elsif (!$main::use_symbolized_profile) { # may not need objtools! + ConfigureObjTools($main::prog) + } + + # Break the opt_lib_prefix into the prefix_list array + @prefix_list = split (',', $main::opt_lib_prefix); + + # Remove trailing / from the prefixes, in the list to prevent + # searching things like /my/path//lib/mylib.so + foreach (@prefix_list) { + s|/+$||; + } +} + +sub FilterAndPrint { + my ($profile, $symbols, $libs, $thread) = @_; + + # Get total data in profile + my $total = TotalProfile($profile); + + # Remove uniniteresting stack items + $profile = RemoveUninterestingFrames($symbols, $profile); + + # Focus? + if ($main::opt_focus ne '') { + $profile = FocusProfile($symbols, $profile, $main::opt_focus); + } + + # Ignore? + if ($main::opt_ignore ne '') { + $profile = IgnoreProfile($symbols, $profile, $main::opt_ignore); + } + + my $calls = ExtractCalls($symbols, $profile); + + # Reduce profiles to required output granularity, and also clean + # each stack trace so a given entry exists at most once. + my $reduced = ReduceProfile($symbols, $profile); + + # Get derived profiles + my $flat = FlatProfile($reduced); + my $cumulative = CumulativeProfile($reduced); + + # Print + if (!$main::opt_interactive) { + if ($main::opt_disasm) { + PrintDisassembly($libs, $flat, $cumulative, $main::opt_disasm); + } elsif ($main::opt_list) { + PrintListing($total, $libs, $flat, $cumulative, $main::opt_list, 0); + } elsif ($main::opt_text) { + # Make sure the output is empty when have nothing to report + # (only matters when --heapcheck is given but we must be + # compatible with old branches that did not pass --heapcheck always): + if ($total != 0) { + printf("Total%s: %s %s\n", + (defined($thread) ? " (t$thread)" : ""), + Unparse($total), Units()); + } + PrintText($symbols, $flat, $cumulative, -1); + } elsif ($main::opt_raw) { + PrintSymbolizedProfile($symbols, $profile, $main::prog); + } elsif ($main::opt_callgrind) { + PrintCallgrind($calls); + } else { + if (PrintDot($main::prog, $symbols, $profile, $flat, $cumulative, $total)) { + if ($main::opt_gv) { + RunGV(TempName($main::next_tmpfile, "ps"), ""); + } elsif ($main::opt_evince) { + RunEvince(TempName($main::next_tmpfile, "pdf"), ""); + } elsif ($main::opt_web) { + my $tmp = TempName($main::next_tmpfile, "svg"); + RunWeb($tmp); + # The command we run might hand the file name off + # to an already running browser instance and then exit. + # Normally, we'd remove $tmp on exit (right now), + # but fork a child to remove $tmp a little later, so that the + # browser has time to load it first. + delete $main::tempnames{$tmp}; + if (fork() == 0) { + sleep 5; + unlink($tmp); + exit(0); + } + } + } else { + cleanup(); + exit(1); + } + } + } else { + InteractiveMode($profile, $symbols, $libs, $total); + } +} + +sub Main() { + Init(); + $main::collected_profile = undef; + @main::profile_files = (); + $main::op_time = time(); + + # Printing symbols is special and requires a lot less info that most. + if ($main::opt_symbols) { + PrintSymbols(*STDIN); # Get /proc/maps and symbols output from stdin + return; + } + + # Fetch all profile data + FetchDynamicProfiles(); + + # this will hold symbols that we read from the profile files + my $symbol_map = {}; + + # Read one profile, pick the last item on the list + my $data = ReadProfile($main::prog, pop(@main::profile_files)); + my $profile = $data->{profile}; + my $pcs = $data->{pcs}; + my $libs = $data->{libs}; # Info about main program and shared libraries + $symbol_map = MergeSymbols($symbol_map, $data->{symbols}); + + # Add additional profiles, if available. + if (scalar(@main::profile_files) > 0) { + foreach my $pname (@main::profile_files) { + my $data2 = ReadProfile($main::prog, $pname); + $profile = AddProfile($profile, $data2->{profile}); + $pcs = AddPcs($pcs, $data2->{pcs}); + $symbol_map = MergeSymbols($symbol_map, $data2->{symbols}); + } + } + + # Subtract base from profile, if specified + if ($main::opt_base ne '') { + my $base = ReadProfile($main::prog, $main::opt_base); + $profile = SubtractProfile($profile, $base->{profile}); + $pcs = AddPcs($pcs, $base->{pcs}); + $symbol_map = MergeSymbols($symbol_map, $base->{symbols}); + } + + # Collect symbols + my $symbols; + if ($main::use_symbolized_profile) { + $symbols = FetchSymbols($pcs, $symbol_map); + } elsif ($main::use_symbol_page) { + $symbols = FetchSymbols($pcs); + } else { + # TODO(csilvers): $libs uses the /proc/self/maps data from profile1, + # which may differ from the data from subsequent profiles, especially + # if they were run on different machines. Use appropriate libs for + # each pc somehow. + $symbols = ExtractSymbols($libs, $pcs); + } + + if (!defined($main::opt_thread)) { + FilterAndPrint($profile, $symbols, $libs); + } + if (defined($data->{threads})) { + foreach my $thread (sort { $a <=> $b } keys(%{$data->{threads}})) { + if (defined($main::opt_thread) && + ($main::opt_thread eq '*' || $main::opt_thread == $thread)) { + my $thread_profile = $data->{threads}{$thread}; + FilterAndPrint($thread_profile, $symbols, $libs, $thread); + } + } + } + + cleanup(); + exit(0); +} + +##### Entry Point ##### + +Main(); + +# Temporary code to detect if we're running on a Goobuntu system. +# These systems don't have the right stuff installed for the special +# Readline libraries to work, so as a temporary workaround, we default +# to using the normal stdio code, rather than the fancier readline-based +# code +sub ReadlineMightFail { + if (-e '/lib/libtermcap.so.2') { + return 0; # libtermcap exists, so readline should be okay + } else { + return 1; + } +} + +sub RunGV { + my $fname = shift; + my $bg = shift; # "" or " &" if we should run in background + if (!system(ShellEscape(@GV, "--version") . " >$dev_null 2>&1")) { + # Options using double dash are supported by this gv version. + # Also, turn on noantialias to better handle bug in gv for + # postscript files with large dimensions. + # TODO: Maybe we should not pass the --noantialias flag + # if the gv version is known to work properly without the flag. + system(ShellEscape(@GV, "--scale=$main::opt_scale", "--noantialias", $fname) + . $bg); + } else { + # Old gv version - only supports options that use single dash. + print STDERR ShellEscape(@GV, "-scale", $main::opt_scale) . "\n"; + system(ShellEscape(@GV, "-scale", "$main::opt_scale", $fname) . $bg); + } +} + +sub RunEvince { + my $fname = shift; + my $bg = shift; # "" or " &" if we should run in background + system(ShellEscape(@EVINCE, $fname) . $bg); +} + +sub RunWeb { + my $fname = shift; + print STDERR "Loading web page file:///$fname\n"; + + if (`uname` =~ /Darwin/) { + # OS X: open will use standard preference for SVG files. + system("/usr/bin/open", $fname); + return; + } + + # Some kind of Unix; try generic symlinks, then specific browsers. + # (Stop once we find one.) + # Works best if the browser is already running. + my @alt = ( + "/etc/alternatives/gnome-www-browser", + "/etc/alternatives/x-www-browser", + "google-chrome", + "firefox", + ); + foreach my $b (@alt) { + if (system($b, $fname) == 0) { + return; + } + } + + print STDERR "Could not load web browser.\n"; +} + +sub RunKcachegrind { + my $fname = shift; + my $bg = shift; # "" or " &" if we should run in background + print STDERR "Starting '@KCACHEGRIND " . $fname . $bg . "'\n"; + system(ShellEscape(@KCACHEGRIND, $fname) . $bg); +} + + +##### Interactive helper routines ##### + +sub InteractiveMode { + $| = 1; # Make output unbuffered for interactive mode + my ($orig_profile, $symbols, $libs, $total) = @_; + + print STDERR "Welcome to jeprof! For help, type 'help'.\n"; + + # Use ReadLine if it's installed and input comes from a console. + if ( -t STDIN && + !ReadlineMightFail() && + defined(eval {require Term::ReadLine}) ) { + my $term = new Term::ReadLine 'jeprof'; + while ( defined ($_ = $term->readline('(jeprof) '))) { + $term->addhistory($_) if /\S/; + if (!InteractiveCommand($orig_profile, $symbols, $libs, $total, $_)) { + last; # exit when we get an interactive command to quit + } + } + } else { # don't have readline + while (1) { + print STDERR "(jeprof) "; + $_ = <STDIN>; + last if ! defined $_ ; + s/\r//g; # turn windows-looking lines into unix-looking lines + + # Save some flags that might be reset by InteractiveCommand() + my $save_opt_lines = $main::opt_lines; + + if (!InteractiveCommand($orig_profile, $symbols, $libs, $total, $_)) { + last; # exit when we get an interactive command to quit + } + + # Restore flags + $main::opt_lines = $save_opt_lines; + } + } +} + +# Takes two args: orig profile, and command to run. +# Returns 1 if we should keep going, or 0 if we were asked to quit +sub InteractiveCommand { + my($orig_profile, $symbols, $libs, $total, $command) = @_; + $_ = $command; # just to make future m//'s easier + if (!defined($_)) { + print STDERR "\n"; + return 0; + } + if (m/^\s*quit/) { + return 0; + } + if (m/^\s*help/) { + InteractiveHelpMessage(); + return 1; + } + # Clear all the mode options -- mode is controlled by "$command" + $main::opt_text = 0; + $main::opt_callgrind = 0; + $main::opt_disasm = 0; + $main::opt_list = 0; + $main::opt_gv = 0; + $main::opt_evince = 0; + $main::opt_cum = 0; + + if (m/^\s*(text|top)(\d*)\s*(.*)/) { + $main::opt_text = 1; + + my $line_limit = ($2 ne "") ? int($2) : 10; + + my $routine; + my $ignore; + ($routine, $ignore) = ParseInteractiveArgs($3); + + my $profile = ProcessProfile($total, $orig_profile, $symbols, "", $ignore); + my $reduced = ReduceProfile($symbols, $profile); + + # Get derived profiles + my $flat = FlatProfile($reduced); + my $cumulative = CumulativeProfile($reduced); + + PrintText($symbols, $flat, $cumulative, $line_limit); + return 1; + } + if (m/^\s*callgrind\s*([^ \n]*)/) { + $main::opt_callgrind = 1; + + # Get derived profiles + my $calls = ExtractCalls($symbols, $orig_profile); + my $filename = $1; + if ( $1 eq '' ) { + $filename = TempName($main::next_tmpfile, "callgrind"); + } + PrintCallgrind($calls, $filename); + if ( $1 eq '' ) { + RunKcachegrind($filename, " & "); + $main::next_tmpfile++; + } + + return 1; + } + if (m/^\s*(web)?list\s*(.+)/) { + my $html = (defined($1) && ($1 eq "web")); + $main::opt_list = 1; + + my $routine; + my $ignore; + ($routine, $ignore) = ParseInteractiveArgs($2); + + my $profile = ProcessProfile($total, $orig_profile, $symbols, "", $ignore); + my $reduced = ReduceProfile($symbols, $profile); + + # Get derived profiles + my $flat = FlatProfile($reduced); + my $cumulative = CumulativeProfile($reduced); + + PrintListing($total, $libs, $flat, $cumulative, $routine, $html); + return 1; + } + if (m/^\s*disasm\s*(.+)/) { + $main::opt_disasm = 1; + + my $routine; + my $ignore; + ($routine, $ignore) = ParseInteractiveArgs($1); + + # Process current profile to account for various settings + my $profile = ProcessProfile($total, $orig_profile, $symbols, "", $ignore); + my $reduced = ReduceProfile($symbols, $profile); + + # Get derived profiles + my $flat = FlatProfile($reduced); + my $cumulative = CumulativeProfile($reduced); + + PrintDisassembly($libs, $flat, $cumulative, $routine); + return 1; + } + if (m/^\s*(gv|web|evince)\s*(.*)/) { + $main::opt_gv = 0; + $main::opt_evince = 0; + $main::opt_web = 0; + if ($1 eq "gv") { + $main::opt_gv = 1; + } elsif ($1 eq "evince") { + $main::opt_evince = 1; + } elsif ($1 eq "web") { + $main::opt_web = 1; + } + + my $focus; + my $ignore; + ($focus, $ignore) = ParseInteractiveArgs($2); + + # Process current profile to account for various settings + my $profile = ProcessProfile($total, $orig_profile, $symbols, + $focus, $ignore); + my $reduced = ReduceProfile($symbols, $profile); + + # Get derived profiles + my $flat = FlatProfile($reduced); + my $cumulative = CumulativeProfile($reduced); + + if (PrintDot($main::prog, $symbols, $profile, $flat, $cumulative, $total)) { + if ($main::opt_gv) { + RunGV(TempName($main::next_tmpfile, "ps"), " &"); + } elsif ($main::opt_evince) { + RunEvince(TempName($main::next_tmpfile, "pdf"), " &"); + } elsif ($main::opt_web) { + RunWeb(TempName($main::next_tmpfile, "svg")); + } + $main::next_tmpfile++; + } + return 1; + } + if (m/^\s*$/) { + return 1; + } + print STDERR "Unknown command: try 'help'.\n"; + return 1; +} + + +sub ProcessProfile { + my $total_count = shift; + my $orig_profile = shift; + my $symbols = shift; + my $focus = shift; + my $ignore = shift; + + # Process current profile to account for various settings + my $profile = $orig_profile; + printf("Total: %s %s\n", Unparse($total_count), Units()); + if ($focus ne '') { + $profile = FocusProfile($symbols, $profile, $focus); + my $focus_count = TotalProfile($profile); + printf("After focusing on '%s': %s %s of %s (%0.1f%%)\n", + $focus, + Unparse($focus_count), Units(), + Unparse($total_count), ($focus_count*100.0) / $total_count); + } + if ($ignore ne '') { + $profile = IgnoreProfile($symbols, $profile, $ignore); + my $ignore_count = TotalProfile($profile); + printf("After ignoring '%s': %s %s of %s (%0.1f%%)\n", + $ignore, + Unparse($ignore_count), Units(), + Unparse($total_count), + ($ignore_count*100.0) / $total_count); + } + + return $profile; +} + +sub InteractiveHelpMessage { + print STDERR <<ENDOFHELP; +Interactive jeprof mode + +Commands: + gv + gv [focus] [-ignore1] [-ignore2] + Show graphical hierarchical display of current profile. Without + any arguments, shows all samples in the profile. With the optional + "focus" argument, restricts the samples shown to just those where + the "focus" regular expression matches a routine name on the stack + trace. + + web + web [focus] [-ignore1] [-ignore2] + Like GV, but displays profile in your web browser instead of using + Ghostview. Works best if your web browser is already running. + To change the browser that gets used: + On Linux, set the /etc/alternatives/gnome-www-browser symlink. + On OS X, change the Finder association for SVG files. + + list [routine_regexp] [-ignore1] [-ignore2] + Show source listing of routines whose names match "routine_regexp" + + weblist [routine_regexp] [-ignore1] [-ignore2] + Displays a source listing of routines whose names match "routine_regexp" + in a web browser. You can click on source lines to view the + corresponding disassembly. + + top [--cum] [-ignore1] [-ignore2] + top20 [--cum] [-ignore1] [-ignore2] + top37 [--cum] [-ignore1] [-ignore2] + Show top lines ordered by flat profile count, or cumulative count + if --cum is specified. If a number is present after 'top', the + top K routines will be shown (defaults to showing the top 10) + + disasm [routine_regexp] [-ignore1] [-ignore2] + Show disassembly of routines whose names match "routine_regexp", + annotated with sample counts. + + callgrind + callgrind [filename] + Generates callgrind file. If no filename is given, kcachegrind is called. + + help - This listing + quit or ^D - End jeprof + +For commands that accept optional -ignore tags, samples where any routine in +the stack trace matches the regular expression in any of the -ignore +parameters will be ignored. + +Further pprof details are available at this location (or one similar): + + /usr/doc/gperftools-$PPROF_VERSION/cpu_profiler.html + /usr/doc/gperftools-$PPROF_VERSION/heap_profiler.html + +ENDOFHELP +} +sub ParseInteractiveArgs { + my $args = shift; + my $focus = ""; + my $ignore = ""; + my @x = split(/ +/, $args); + foreach $a (@x) { + if ($a =~ m/^(--|-)lines$/) { + $main::opt_lines = 1; + } elsif ($a =~ m/^(--|-)cum$/) { + $main::opt_cum = 1; + } elsif ($a =~ m/^-(.*)/) { + $ignore .= (($ignore ne "") ? "|" : "" ) . $1; + } else { + $focus .= (($focus ne "") ? "|" : "" ) . $a; + } + } + if ($ignore ne "") { + print STDERR "Ignoring samples in call stacks that match '$ignore'\n"; + } + return ($focus, $ignore); +} + +##### Output code ##### + +sub TempName { + my $fnum = shift; + my $ext = shift; + my $file = "$main::tmpfile_ps.$fnum.$ext"; + $main::tempnames{$file} = 1; + return $file; +} + +# Print profile data in packed binary format (64-bit) to standard out +sub PrintProfileData { + my $profile = shift; + + # print header (64-bit style) + # (zero) (header-size) (version) (sample-period) (zero) + print pack('L*', 0, 0, 3, 0, 0, 0, 1, 0, 0, 0); + + foreach my $k (keys(%{$profile})) { + my $count = $profile->{$k}; + my @addrs = split(/\n/, $k); + if ($#addrs >= 0) { + my $depth = $#addrs + 1; + # int(foo / 2**32) is the only reliable way to get rid of bottom + # 32 bits on both 32- and 64-bit systems. + print pack('L*', $count & 0xFFFFFFFF, int($count / 2**32)); + print pack('L*', $depth & 0xFFFFFFFF, int($depth / 2**32)); + + foreach my $full_addr (@addrs) { + my $addr = $full_addr; + $addr =~ s/0x0*//; # strip off leading 0x, zeroes + if (length($addr) > 16) { + print STDERR "Invalid address in profile: $full_addr\n"; + next; + } + my $low_addr = substr($addr, -8); # get last 8 hex chars + my $high_addr = substr($addr, -16, 8); # get up to 8 more hex chars + print pack('L*', hex('0x' . $low_addr), hex('0x' . $high_addr)); + } + } + } +} + +# Print symbols and profile data +sub PrintSymbolizedProfile { + my $symbols = shift; + my $profile = shift; + my $prog = shift; + + $SYMBOL_PAGE =~ m,[^/]+$,; # matches everything after the last slash + my $symbol_marker = $&; + + print '--- ', $symbol_marker, "\n"; + if (defined($prog)) { + print 'binary=', $prog, "\n"; + } + while (my ($pc, $name) = each(%{$symbols})) { + my $sep = ' '; + print '0x', $pc; + # We have a list of function names, which include the inlined + # calls. They are separated (and terminated) by --, which is + # illegal in function names. + for (my $j = 2; $j <= $#{$name}; $j += 3) { + print $sep, $name->[$j]; + $sep = '--'; + } + print "\n"; + } + print '---', "\n"; + + my $profile_marker; + if ($main::profile_type eq 'heap') { + $HEAP_PAGE =~ m,[^/]+$,; # matches everything after the last slash + $profile_marker = $&; + } elsif ($main::profile_type eq 'growth') { + $GROWTH_PAGE =~ m,[^/]+$,; # matches everything after the last slash + $profile_marker = $&; + } elsif ($main::profile_type eq 'contention') { + $CONTENTION_PAGE =~ m,[^/]+$,; # matches everything after the last slash + $profile_marker = $&; + } else { # elsif ($main::profile_type eq 'cpu') + $PROFILE_PAGE =~ m,[^/]+$,; # matches everything after the last slash + $profile_marker = $&; + } + + print '--- ', $profile_marker, "\n"; + if (defined($main::collected_profile)) { + # if used with remote fetch, simply dump the collected profile to output. + open(SRC, "<$main::collected_profile"); + while (<SRC>) { + print $_; + } + close(SRC); + } else { + # --raw/http: For everything to work correctly for non-remote profiles, we + # would need to extend PrintProfileData() to handle all possible profile + # types, re-enable the code that is currently disabled in ReadCPUProfile() + # and FixCallerAddresses(), and remove the remote profile dumping code in + # the block above. + die "--raw/http: jeprof can only dump remote profiles for --raw\n"; + # dump a cpu-format profile to standard out + PrintProfileData($profile); + } +} + +# Print text output +sub PrintText { + my $symbols = shift; + my $flat = shift; + my $cumulative = shift; + my $line_limit = shift; + + my $total = TotalProfile($flat); + + # Which profile to sort by? + my $s = $main::opt_cum ? $cumulative : $flat; + + my $running_sum = 0; + my $lines = 0; + foreach my $k (sort { GetEntry($s, $b) <=> GetEntry($s, $a) || $a cmp $b } + keys(%{$cumulative})) { + my $f = GetEntry($flat, $k); + my $c = GetEntry($cumulative, $k); + $running_sum += $f; + + my $sym = $k; + if (exists($symbols->{$k})) { + $sym = $symbols->{$k}->[0] . " " . $symbols->{$k}->[1]; + if ($main::opt_addresses) { + $sym = $k . " " . $sym; + } + } + + if ($f != 0 || $c != 0) { + printf("%8s %6s %6s %8s %6s %s\n", + Unparse($f), + Percent($f, $total), + Percent($running_sum, $total), + Unparse($c), + Percent($c, $total), + $sym); + } + $lines++; + last if ($line_limit >= 0 && $lines >= $line_limit); + } +} + +# Callgrind format has a compression for repeated function and file +# names. You show the name the first time, and just use its number +# subsequently. This can cut down the file to about a third or a +# quarter of its uncompressed size. $key and $val are the key/value +# pair that would normally be printed by callgrind; $map is a map from +# value to number. +sub CompressedCGName { + my($key, $val, $map) = @_; + my $idx = $map->{$val}; + # For very short keys, providing an index hurts rather than helps. + if (length($val) <= 3) { + return "$key=$val\n"; + } elsif (defined($idx)) { + return "$key=($idx)\n"; + } else { + # scalar(keys $map) gives the number of items in the map. + $idx = scalar(keys(%{$map})) + 1; + $map->{$val} = $idx; + return "$key=($idx) $val\n"; + } +} + +# Print the call graph in a way that's suiteable for callgrind. +sub PrintCallgrind { + my $calls = shift; + my $filename; + my %filename_to_index_map; + my %fnname_to_index_map; + + if ($main::opt_interactive) { + $filename = shift; + print STDERR "Writing callgrind file to '$filename'.\n" + } else { + $filename = "&STDOUT"; + } + open(CG, ">$filename"); + printf CG ("events: Hits\n\n"); + foreach my $call ( map { $_->[0] } + sort { $a->[1] cmp $b ->[1] || + $a->[2] <=> $b->[2] } + map { /([^:]+):(\d+):([^ ]+)( -> ([^:]+):(\d+):(.+))?/; + [$_, $1, $2] } + keys %$calls ) { + my $count = int($calls->{$call}); + $call =~ /([^:]+):(\d+):([^ ]+)( -> ([^:]+):(\d+):(.+))?/; + my ( $caller_file, $caller_line, $caller_function, + $callee_file, $callee_line, $callee_function ) = + ( $1, $2, $3, $5, $6, $7 ); + + # TODO(csilvers): for better compression, collect all the + # caller/callee_files and functions first, before printing + # anything, and only compress those referenced more than once. + printf CG CompressedCGName("fl", $caller_file, \%filename_to_index_map); + printf CG CompressedCGName("fn", $caller_function, \%fnname_to_index_map); + if (defined $6) { + printf CG CompressedCGName("cfl", $callee_file, \%filename_to_index_map); + printf CG CompressedCGName("cfn", $callee_function, \%fnname_to_index_map); + printf CG ("calls=$count $callee_line\n"); + } + printf CG ("$caller_line $count\n\n"); + } +} + +# Print disassembly for all all routines that match $main::opt_disasm +sub PrintDisassembly { + my $libs = shift; + my $flat = shift; + my $cumulative = shift; + my $disasm_opts = shift; + + my $total = TotalProfile($flat); + + foreach my $lib (@{$libs}) { + my $symbol_table = GetProcedureBoundaries($lib->[0], $disasm_opts); + my $offset = AddressSub($lib->[1], $lib->[3]); + foreach my $routine (sort ByName keys(%{$symbol_table})) { + my $start_addr = $symbol_table->{$routine}->[0]; + my $end_addr = $symbol_table->{$routine}->[1]; + # See if there are any samples in this routine + my $length = hex(AddressSub($end_addr, $start_addr)); + my $addr = AddressAdd($start_addr, $offset); + for (my $i = 0; $i < $length; $i++) { + if (defined($cumulative->{$addr})) { + PrintDisassembledFunction($lib->[0], $offset, + $routine, $flat, $cumulative, + $start_addr, $end_addr, $total); + last; + } + $addr = AddressInc($addr); + } + } + } +} + +# Return reference to array of tuples of the form: +# [start_address, filename, linenumber, instruction, limit_address] +# E.g., +# ["0x806c43d", "/foo/bar.cc", 131, "ret", "0x806c440"] +sub Disassemble { + my $prog = shift; + my $offset = shift; + my $start_addr = shift; + my $end_addr = shift; + + my $objdump = $obj_tool_map{"objdump"}; + my $cmd = ShellEscape($objdump, "-C", "-d", "-l", "--no-show-raw-insn", + "--start-address=0x$start_addr", + "--stop-address=0x$end_addr", $prog); + open(OBJDUMP, "$cmd |") || error("$cmd: $!\n"); + my @result = (); + my $filename = ""; + my $linenumber = -1; + my $last = ["", "", "", ""]; + while (<OBJDUMP>) { + s/\r//g; # turn windows-looking lines into unix-looking lines + chop; + if (m|\s*([^:\s]+):(\d+)\s*$|) { + # Location line of the form: + # <filename>:<linenumber> + $filename = $1; + $linenumber = $2; + } elsif (m/^ +([0-9a-f]+):\s*(.*)/) { + # Disassembly line -- zero-extend address to full length + my $addr = HexExtend($1); + my $k = AddressAdd($addr, $offset); + $last->[4] = $k; # Store ending address for previous instruction + $last = [$k, $filename, $linenumber, $2, $end_addr]; + push(@result, $last); + } + } + close(OBJDUMP); + return @result; +} + +# The input file should contain lines of the form /proc/maps-like +# output (same format as expected from the profiles) or that looks +# like hex addresses (like "0xDEADBEEF"). We will parse all +# /proc/maps output, and for all the hex addresses, we will output +# "short" symbol names, one per line, in the same order as the input. +sub PrintSymbols { + my $maps_and_symbols_file = shift; + + # ParseLibraries expects pcs to be in a set. Fine by us... + my @pclist = (); # pcs in sorted order + my $pcs = {}; + my $map = ""; + foreach my $line (<$maps_and_symbols_file>) { + $line =~ s/\r//g; # turn windows-looking lines into unix-looking lines + if ($line =~ /\b(0x[0-9a-f]+)\b/i) { + push(@pclist, HexExtend($1)); + $pcs->{$pclist[-1]} = 1; + } else { + $map .= $line; + } + } + + my $libs = ParseLibraries($main::prog, $map, $pcs); + my $symbols = ExtractSymbols($libs, $pcs); + + foreach my $pc (@pclist) { + # ->[0] is the shortname, ->[2] is the full name + print(($symbols->{$pc}->[0] || "??") . "\n"); + } +} + + +# For sorting functions by name +sub ByName { + return ShortFunctionName($a) cmp ShortFunctionName($b); +} + +# Print source-listing for all all routines that match $list_opts +sub PrintListing { + my $total = shift; + my $libs = shift; + my $flat = shift; + my $cumulative = shift; + my $list_opts = shift; + my $html = shift; + + my $output = \*STDOUT; + my $fname = ""; + + if ($html) { + # Arrange to write the output to a temporary file + $fname = TempName($main::next_tmpfile, "html"); + $main::next_tmpfile++; + if (!open(TEMP, ">$fname")) { + print STDERR "$fname: $!\n"; + return; + } + $output = \*TEMP; + print $output HtmlListingHeader(); + printf $output ("<div class=\"legend\">%s<br>Total: %s %s</div>\n", + $main::prog, Unparse($total), Units()); + } + + my $listed = 0; + foreach my $lib (@{$libs}) { + my $symbol_table = GetProcedureBoundaries($lib->[0], $list_opts); + my $offset = AddressSub($lib->[1], $lib->[3]); + foreach my $routine (sort ByName keys(%{$symbol_table})) { + # Print if there are any samples in this routine + my $start_addr = $symbol_table->{$routine}->[0]; + my $end_addr = $symbol_table->{$routine}->[1]; + my $length = hex(AddressSub($end_addr, $start_addr)); + my $addr = AddressAdd($start_addr, $offset); + for (my $i = 0; $i < $length; $i++) { + if (defined($cumulative->{$addr})) { + $listed += PrintSource( + $lib->[0], $offset, + $routine, $flat, $cumulative, + $start_addr, $end_addr, + $html, + $output); + last; + } + $addr = AddressInc($addr); + } + } + } + + if ($html) { + if ($listed > 0) { + print $output HtmlListingFooter(); + close($output); + RunWeb($fname); + } else { + close($output); + unlink($fname); + } + } +} + +sub HtmlListingHeader { + return <<'EOF'; +<DOCTYPE html> +<html> +<head> +<title>Pprof listing</title> +<style type="text/css"> +body { + font-family: sans-serif; +} +h1 { + font-size: 1.5em; + margin-bottom: 4px; +} +.legend { + font-size: 1.25em; +} +.line { + color: #aaaaaa; +} +.nop { + color: #aaaaaa; +} +.unimportant { + color: #cccccc; +} +.disasmloc { + color: #000000; +} +.deadsrc { + cursor: pointer; +} +.deadsrc:hover { + background-color: #eeeeee; +} +.livesrc { + color: #0000ff; + cursor: pointer; +} +.livesrc:hover { + background-color: #eeeeee; +} +.asm { + color: #008800; + display: none; +} +</style> +<script type="text/javascript"> +function jeprof_toggle_asm(e) { + var target; + if (!e) e = window.event; + if (e.target) target = e.target; + else if (e.srcElement) target = e.srcElement; + + if (target) { + var asm = target.nextSibling; + if (asm && asm.className == "asm") { + asm.style.display = (asm.style.display == "block" ? "" : "block"); + e.preventDefault(); + return false; + } + } +} +</script> +</head> +<body> +EOF +} + +sub HtmlListingFooter { + return <<'EOF'; +</body> +</html> +EOF +} + +sub HtmlEscape { + my $text = shift; + $text =~ s/&/&/g; + $text =~ s/</</g; + $text =~ s/>/>/g; + return $text; +} + +# Returns the indentation of the line, if it has any non-whitespace +# characters. Otherwise, returns -1. +sub Indentation { + my $line = shift; + if (m/^(\s*)\S/) { + return length($1); + } else { + return -1; + } +} + +# If the symbol table contains inlining info, Disassemble() may tag an +# instruction with a location inside an inlined function. But for +# source listings, we prefer to use the location in the function we +# are listing. So use MapToSymbols() to fetch full location +# information for each instruction and then pick out the first +# location from a location list (location list contains callers before +# callees in case of inlining). +# +# After this routine has run, each entry in $instructions contains: +# [0] start address +# [1] filename for function we are listing +# [2] line number for function we are listing +# [3] disassembly +# [4] limit address +# [5] most specific filename (may be different from [1] due to inlining) +# [6] most specific line number (may be different from [2] due to inlining) +sub GetTopLevelLineNumbers { + my ($lib, $offset, $instructions) = @_; + my $pcs = []; + for (my $i = 0; $i <= $#{$instructions}; $i++) { + push(@{$pcs}, $instructions->[$i]->[0]); + } + my $symbols = {}; + MapToSymbols($lib, $offset, $pcs, $symbols); + for (my $i = 0; $i <= $#{$instructions}; $i++) { + my $e = $instructions->[$i]; + push(@{$e}, $e->[1]); + push(@{$e}, $e->[2]); + my $addr = $e->[0]; + my $sym = $symbols->{$addr}; + if (defined($sym)) { + if ($#{$sym} >= 2 && $sym->[1] =~ m/^(.*):(\d+)$/) { + $e->[1] = $1; # File name + $e->[2] = $2; # Line number + } + } + } +} + +# Print source-listing for one routine +sub PrintSource { + my $prog = shift; + my $offset = shift; + my $routine = shift; + my $flat = shift; + my $cumulative = shift; + my $start_addr = shift; + my $end_addr = shift; + my $html = shift; + my $output = shift; + + # Disassemble all instructions (just to get line numbers) + my @instructions = Disassemble($prog, $offset, $start_addr, $end_addr); + GetTopLevelLineNumbers($prog, $offset, \@instructions); + + # Hack 1: assume that the first source file encountered in the + # disassembly contains the routine + my $filename = undef; + for (my $i = 0; $i <= $#instructions; $i++) { + if ($instructions[$i]->[2] >= 0) { + $filename = $instructions[$i]->[1]; + last; + } + } + if (!defined($filename)) { + print STDERR "no filename found in $routine\n"; + return 0; + } + + # Hack 2: assume that the largest line number from $filename is the + # end of the procedure. This is typically safe since if P1 contains + # an inlined call to P2, then P2 usually occurs earlier in the + # source file. If this does not work, we might have to compute a + # density profile or just print all regions we find. + my $lastline = 0; + for (my $i = 0; $i <= $#instructions; $i++) { + my $f = $instructions[$i]->[1]; + my $l = $instructions[$i]->[2]; + if (($f eq $filename) && ($l > $lastline)) { + $lastline = $l; + } + } + + # Hack 3: assume the first source location from "filename" is the start of + # the source code. + my $firstline = 1; + for (my $i = 0; $i <= $#instructions; $i++) { + if ($instructions[$i]->[1] eq $filename) { + $firstline = $instructions[$i]->[2]; + last; + } + } + + # Hack 4: Extend last line forward until its indentation is less than + # the indentation we saw on $firstline + my $oldlastline = $lastline; + { + if (!open(FILE, "<$filename")) { + print STDERR "$filename: $!\n"; + return 0; + } + my $l = 0; + my $first_indentation = -1; + while (<FILE>) { + s/\r//g; # turn windows-looking lines into unix-looking lines + $l++; + my $indent = Indentation($_); + if ($l >= $firstline) { + if ($first_indentation < 0 && $indent >= 0) { + $first_indentation = $indent; + last if ($first_indentation == 0); + } + } + if ($l >= $lastline && $indent >= 0) { + if ($indent >= $first_indentation) { + $lastline = $l+1; + } else { + last; + } + } + } + close(FILE); + } + + # Assign all samples to the range $firstline,$lastline, + # Hack 4: If an instruction does not occur in the range, its samples + # are moved to the next instruction that occurs in the range. + my $samples1 = {}; # Map from line number to flat count + my $samples2 = {}; # Map from line number to cumulative count + my $running1 = 0; # Unassigned flat counts + my $running2 = 0; # Unassigned cumulative counts + my $total1 = 0; # Total flat counts + my $total2 = 0; # Total cumulative counts + my %disasm = (); # Map from line number to disassembly + my $running_disasm = ""; # Unassigned disassembly + my $skip_marker = "---\n"; + if ($html) { + $skip_marker = ""; + for (my $l = $firstline; $l <= $lastline; $l++) { + $disasm{$l} = ""; + } + } + my $last_dis_filename = ''; + my $last_dis_linenum = -1; + my $last_touched_line = -1; # To detect gaps in disassembly for a line + foreach my $e (@instructions) { + # Add up counts for all address that fall inside this instruction + my $c1 = 0; + my $c2 = 0; + for (my $a = $e->[0]; $a lt $e->[4]; $a = AddressInc($a)) { + $c1 += GetEntry($flat, $a); + $c2 += GetEntry($cumulative, $a); + } + + if ($html) { + my $dis = sprintf(" %6s %6s \t\t%8s: %s ", + HtmlPrintNumber($c1), + HtmlPrintNumber($c2), + UnparseAddress($offset, $e->[0]), + CleanDisassembly($e->[3])); + + # Append the most specific source line associated with this instruction + if (length($dis) < 80) { $dis .= (' ' x (80 - length($dis))) }; + $dis = HtmlEscape($dis); + my $f = $e->[5]; + my $l = $e->[6]; + if ($f ne $last_dis_filename) { + $dis .= sprintf("<span class=disasmloc>%s:%d</span>", + HtmlEscape(CleanFileName($f)), $l); + } elsif ($l ne $last_dis_linenum) { + # De-emphasize the unchanged file name portion + $dis .= sprintf("<span class=unimportant>%s</span>" . + "<span class=disasmloc>:%d</span>", + HtmlEscape(CleanFileName($f)), $l); + } else { + # De-emphasize the entire location + $dis .= sprintf("<span class=unimportant>%s:%d</span>", + HtmlEscape(CleanFileName($f)), $l); + } + $last_dis_filename = $f; + $last_dis_linenum = $l; + $running_disasm .= $dis; + $running_disasm .= "\n"; + } + + $running1 += $c1; + $running2 += $c2; + $total1 += $c1; + $total2 += $c2; + my $file = $e->[1]; + my $line = $e->[2]; + if (($file eq $filename) && + ($line >= $firstline) && + ($line <= $lastline)) { + # Assign all accumulated samples to this line + AddEntry($samples1, $line, $running1); + AddEntry($samples2, $line, $running2); + $running1 = 0; + $running2 = 0; + if ($html) { + if ($line != $last_touched_line && $disasm{$line} ne '') { + $disasm{$line} .= "\n"; + } + $disasm{$line} .= $running_disasm; + $running_disasm = ''; + $last_touched_line = $line; + } + } + } + + # Assign any leftover samples to $lastline + AddEntry($samples1, $lastline, $running1); + AddEntry($samples2, $lastline, $running2); + if ($html) { + if ($lastline != $last_touched_line && $disasm{$lastline} ne '') { + $disasm{$lastline} .= "\n"; + } + $disasm{$lastline} .= $running_disasm; + } + + if ($html) { + printf $output ( + "<h1>%s</h1>%s\n<pre onClick=\"jeprof_toggle_asm()\">\n" . + "Total:%6s %6s (flat / cumulative %s)\n", + HtmlEscape(ShortFunctionName($routine)), + HtmlEscape(CleanFileName($filename)), + Unparse($total1), + Unparse($total2), + Units()); + } else { + printf $output ( + "ROUTINE ====================== %s in %s\n" . + "%6s %6s Total %s (flat / cumulative)\n", + ShortFunctionName($routine), + CleanFileName($filename), + Unparse($total1), + Unparse($total2), + Units()); + } + if (!open(FILE, "<$filename")) { + print STDERR "$filename: $!\n"; + return 0; + } + my $l = 0; + while (<FILE>) { + s/\r//g; # turn windows-looking lines into unix-looking lines + $l++; + if ($l >= $firstline - 5 && + (($l <= $oldlastline + 5) || ($l <= $lastline))) { + chop; + my $text = $_; + if ($l == $firstline) { print $output $skip_marker; } + my $n1 = GetEntry($samples1, $l); + my $n2 = GetEntry($samples2, $l); + if ($html) { + # Emit a span that has one of the following classes: + # livesrc -- has samples + # deadsrc -- has disassembly, but with no samples + # nop -- has no matching disasembly + # Also emit an optional span containing disassembly. + my $dis = $disasm{$l}; + my $asm = ""; + if (defined($dis) && $dis ne '') { + $asm = "<span class=\"asm\">" . $dis . "</span>"; + } + my $source_class = (($n1 + $n2 > 0) + ? "livesrc" + : (($asm ne "") ? "deadsrc" : "nop")); + printf $output ( + "<span class=\"line\">%5d</span> " . + "<span class=\"%s\">%6s %6s %s</span>%s\n", + $l, $source_class, + HtmlPrintNumber($n1), + HtmlPrintNumber($n2), + HtmlEscape($text), + $asm); + } else { + printf $output( + "%6s %6s %4d: %s\n", + UnparseAlt($n1), + UnparseAlt($n2), + $l, + $text); + } + if ($l == $lastline) { print $output $skip_marker; } + }; + } + close(FILE); + if ($html) { + print $output "</pre>\n"; + } + return 1; +} + +# Return the source line for the specified file/linenumber. +# Returns undef if not found. +sub SourceLine { + my $file = shift; + my $line = shift; + + # Look in cache + if (!defined($main::source_cache{$file})) { + if (100 < scalar keys(%main::source_cache)) { + # Clear the cache when it gets too big + $main::source_cache = (); + } + + # Read all lines from the file + if (!open(FILE, "<$file")) { + print STDERR "$file: $!\n"; + $main::source_cache{$file} = []; # Cache the negative result + return undef; + } + my $lines = []; + push(@{$lines}, ""); # So we can use 1-based line numbers as indices + while (<FILE>) { + push(@{$lines}, $_); + } + close(FILE); + + # Save the lines in the cache + $main::source_cache{$file} = $lines; + } + + my $lines = $main::source_cache{$file}; + if (($line < 0) || ($line > $#{$lines})) { + return undef; + } else { + return $lines->[$line]; + } +} + +# Print disassembly for one routine with interspersed source if available +sub PrintDisassembledFunction { + my $prog = shift; + my $offset = shift; + my $routine = shift; + my $flat = shift; + my $cumulative = shift; + my $start_addr = shift; + my $end_addr = shift; + my $total = shift; + + # Disassemble all instructions + my @instructions = Disassemble($prog, $offset, $start_addr, $end_addr); + + # Make array of counts per instruction + my @flat_count = (); + my @cum_count = (); + my $flat_total = 0; + my $cum_total = 0; + foreach my $e (@instructions) { + # Add up counts for all address that fall inside this instruction + my $c1 = 0; + my $c2 = 0; + for (my $a = $e->[0]; $a lt $e->[4]; $a = AddressInc($a)) { + $c1 += GetEntry($flat, $a); + $c2 += GetEntry($cumulative, $a); + } + push(@flat_count, $c1); + push(@cum_count, $c2); + $flat_total += $c1; + $cum_total += $c2; + } + + # Print header with total counts + printf("ROUTINE ====================== %s\n" . + "%6s %6s %s (flat, cumulative) %.1f%% of total\n", + ShortFunctionName($routine), + Unparse($flat_total), + Unparse($cum_total), + Units(), + ($cum_total * 100.0) / $total); + + # Process instructions in order + my $current_file = ""; + for (my $i = 0; $i <= $#instructions; ) { + my $e = $instructions[$i]; + + # Print the new file name whenever we switch files + if ($e->[1] ne $current_file) { + $current_file = $e->[1]; + my $fname = $current_file; + $fname =~ s|^\./||; # Trim leading "./" + + # Shorten long file names + if (length($fname) >= 58) { + $fname = "..." . substr($fname, -55); + } + printf("-------------------- %s\n", $fname); + } + + # TODO: Compute range of lines to print together to deal with + # small reorderings. + my $first_line = $e->[2]; + my $last_line = $first_line; + my %flat_sum = (); + my %cum_sum = (); + for (my $l = $first_line; $l <= $last_line; $l++) { + $flat_sum{$l} = 0; + $cum_sum{$l} = 0; + } + + # Find run of instructions for this range of source lines + my $first_inst = $i; + while (($i <= $#instructions) && + ($instructions[$i]->[2] >= $first_line) && + ($instructions[$i]->[2] <= $last_line)) { + $e = $instructions[$i]; + $flat_sum{$e->[2]} += $flat_count[$i]; + $cum_sum{$e->[2]} += $cum_count[$i]; + $i++; + } + my $last_inst = $i - 1; + + # Print source lines + for (my $l = $first_line; $l <= $last_line; $l++) { + my $line = SourceLine($current_file, $l); + if (!defined($line)) { + $line = "?\n"; + next; + } else { + $line =~ s/^\s+//; + } + printf("%6s %6s %5d: %s", + UnparseAlt($flat_sum{$l}), + UnparseAlt($cum_sum{$l}), + $l, + $line); + } + + # Print disassembly + for (my $x = $first_inst; $x <= $last_inst; $x++) { + my $e = $instructions[$x]; + printf("%6s %6s %8s: %6s\n", + UnparseAlt($flat_count[$x]), + UnparseAlt($cum_count[$x]), + UnparseAddress($offset, $e->[0]), + CleanDisassembly($e->[3])); + } + } +} + +# Print DOT graph +sub PrintDot { + my $prog = shift; + my $symbols = shift; + my $raw = shift; + my $flat = shift; + my $cumulative = shift; + my $overall_total = shift; + + # Get total + my $local_total = TotalProfile($flat); + my $nodelimit = int($main::opt_nodefraction * $local_total); + my $edgelimit = int($main::opt_edgefraction * $local_total); + my $nodecount = $main::opt_nodecount; + + # Find nodes to include + my @list = (sort { abs(GetEntry($cumulative, $b)) <=> + abs(GetEntry($cumulative, $a)) + || $a cmp $b } + keys(%{$cumulative})); + my $last = $nodecount - 1; + if ($last > $#list) { + $last = $#list; + } + while (($last >= 0) && + (abs(GetEntry($cumulative, $list[$last])) <= $nodelimit)) { + $last--; + } + if ($last < 0) { + print STDERR "No nodes to print\n"; + return 0; + } + + if ($nodelimit > 0 || $edgelimit > 0) { + printf STDERR ("Dropping nodes with <= %s %s; edges with <= %s abs(%s)\n", + Unparse($nodelimit), Units(), + Unparse($edgelimit), Units()); + } + + # Open DOT output file + my $output; + my $escaped_dot = ShellEscape(@DOT); + my $escaped_ps2pdf = ShellEscape(@PS2PDF); + if ($main::opt_gv) { + my $escaped_outfile = ShellEscape(TempName($main::next_tmpfile, "ps")); + $output = "| $escaped_dot -Tps2 >$escaped_outfile"; + } elsif ($main::opt_evince) { + my $escaped_outfile = ShellEscape(TempName($main::next_tmpfile, "pdf")); + $output = "| $escaped_dot -Tps2 | $escaped_ps2pdf - $escaped_outfile"; + } elsif ($main::opt_ps) { + $output = "| $escaped_dot -Tps2"; + } elsif ($main::opt_pdf) { + $output = "| $escaped_dot -Tps2 | $escaped_ps2pdf - -"; + } elsif ($main::opt_web || $main::opt_svg) { + # We need to post-process the SVG, so write to a temporary file always. + my $escaped_outfile = ShellEscape(TempName($main::next_tmpfile, "svg")); + $output = "| $escaped_dot -Tsvg >$escaped_outfile"; + } elsif ($main::opt_gif) { + $output = "| $escaped_dot -Tgif"; + } else { + $output = ">&STDOUT"; + } + open(DOT, $output) || error("$output: $!\n"); + + # Title + printf DOT ("digraph \"%s; %s %s\" {\n", + $prog, + Unparse($overall_total), + Units()); + if ($main::opt_pdf) { + # The output is more printable if we set the page size for dot. + printf DOT ("size=\"8,11\"\n"); + } + printf DOT ("node [width=0.375,height=0.25];\n"); + + # Print legend + printf DOT ("Legend [shape=box,fontsize=24,shape=plaintext," . + "label=\"%s\\l%s\\l%s\\l%s\\l%s\\l\"];\n", + $prog, + sprintf("Total %s: %s", Units(), Unparse($overall_total)), + sprintf("Focusing on: %s", Unparse($local_total)), + sprintf("Dropped nodes with <= %s abs(%s)", + Unparse($nodelimit), Units()), + sprintf("Dropped edges with <= %s %s", + Unparse($edgelimit), Units()) + ); + + # Print nodes + my %node = (); + my $nextnode = 1; + foreach my $a (@list[0..$last]) { + # Pick font size + my $f = GetEntry($flat, $a); + my $c = GetEntry($cumulative, $a); + + my $fs = 8; + if ($local_total > 0) { + $fs = 8 + (50.0 * sqrt(abs($f * 1.0 / $local_total))); + } + + $node{$a} = $nextnode++; + my $sym = $a; + $sym =~ s/\s+/\\n/g; + $sym =~ s/::/\\n/g; + + # Extra cumulative info to print for non-leaves + my $extra = ""; + if ($f != $c) { + $extra = sprintf("\\rof %s (%s)", + Unparse($c), + Percent($c, $local_total)); + } + my $style = ""; + if ($main::opt_heapcheck) { + if ($f > 0) { + # make leak-causing nodes more visible (add a background) + $style = ",style=filled,fillcolor=gray" + } elsif ($f < 0) { + # make anti-leak-causing nodes (which almost never occur) + # stand out as well (triple border) + $style = ",peripheries=3" + } + } + + printf DOT ("N%d [label=\"%s\\n%s (%s)%s\\r" . + "\",shape=box,fontsize=%.1f%s];\n", + $node{$a}, + $sym, + Unparse($f), + Percent($f, $local_total), + $extra, + $fs, + $style, + ); + } + + # Get edges and counts per edge + my %edge = (); + my $n; + my $fullname_to_shortname_map = {}; + FillFullnameToShortnameMap($symbols, $fullname_to_shortname_map); + foreach my $k (keys(%{$raw})) { + # TODO: omit low %age edges + $n = $raw->{$k}; + my @translated = TranslateStack($symbols, $fullname_to_shortname_map, $k); + for (my $i = 1; $i <= $#translated; $i++) { + my $src = $translated[$i]; + my $dst = $translated[$i-1]; + #next if ($src eq $dst); # Avoid self-edges? + if (exists($node{$src}) && exists($node{$dst})) { + my $edge_label = "$src\001$dst"; + if (!exists($edge{$edge_label})) { + $edge{$edge_label} = 0; + } + $edge{$edge_label} += $n; + } + } + } + + # Print edges (process in order of decreasing counts) + my %indegree = (); # Number of incoming edges added per node so far + my %outdegree = (); # Number of outgoing edges added per node so far + foreach my $e (sort { $edge{$b} <=> $edge{$a} } keys(%edge)) { + my @x = split(/\001/, $e); + $n = $edge{$e}; + + # Initialize degree of kept incoming and outgoing edges if necessary + my $src = $x[0]; + my $dst = $x[1]; + if (!exists($outdegree{$src})) { $outdegree{$src} = 0; } + if (!exists($indegree{$dst})) { $indegree{$dst} = 0; } + + my $keep; + if ($indegree{$dst} == 0) { + # Keep edge if needed for reachability + $keep = 1; + } elsif (abs($n) <= $edgelimit) { + # Drop if we are below --edgefraction + $keep = 0; + } elsif ($outdegree{$src} >= $main::opt_maxdegree || + $indegree{$dst} >= $main::opt_maxdegree) { + # Keep limited number of in/out edges per node + $keep = 0; + } else { + $keep = 1; + } + + if ($keep) { + $outdegree{$src}++; + $indegree{$dst}++; + + # Compute line width based on edge count + my $fraction = abs($local_total ? (3 * ($n / $local_total)) : 0); + if ($fraction > 1) { $fraction = 1; } + my $w = $fraction * 2; + if ($w < 1 && ($main::opt_web || $main::opt_svg)) { + # SVG output treats line widths < 1 poorly. + $w = 1; + } + + # Dot sometimes segfaults if given edge weights that are too large, so + # we cap the weights at a large value + my $edgeweight = abs($n) ** 0.7; + if ($edgeweight > 100000) { $edgeweight = 100000; } + $edgeweight = int($edgeweight); + + my $style = sprintf("setlinewidth(%f)", $w); + if ($x[1] =~ m/\(inline\)/) { + $style .= ",dashed"; + } + + # Use a slightly squashed function of the edge count as the weight + printf DOT ("N%s -> N%s [label=%s, weight=%d, style=\"%s\"];\n", + $node{$x[0]}, + $node{$x[1]}, + Unparse($n), + $edgeweight, + $style); + } + } + + print DOT ("}\n"); + close(DOT); + + if ($main::opt_web || $main::opt_svg) { + # Rewrite SVG to be more usable inside web browser. + RewriteSvg(TempName($main::next_tmpfile, "svg")); + } + + return 1; +} + +sub RewriteSvg { + my $svgfile = shift; + + open(SVG, $svgfile) || die "open temp svg: $!"; + my @svg = <SVG>; + close(SVG); + unlink $svgfile; + my $svg = join('', @svg); + + # Dot's SVG output is + # + # <svg width="___" height="___" + # viewBox="___" xmlns=...> + # <g id="graph0" transform="..."> + # ... + # </g> + # </svg> + # + # Change it to + # + # <svg width="100%" height="100%" + # xmlns=...> + # $svg_javascript + # <g id="viewport" transform="translate(0,0)"> + # <g id="graph0" transform="..."> + # ... + # </g> + # </g> + # </svg> + + # Fix width, height; drop viewBox. + $svg =~ s/(?s)<svg width="[^"]+" height="[^"]+"(.*?)viewBox="[^"]+"/<svg width="100%" height="100%"$1/; + + # Insert script, viewport <g> above first <g> + my $svg_javascript = SvgJavascript(); + my $viewport = "<g id=\"viewport\" transform=\"translate(0,0)\">\n"; + $svg =~ s/<g id="graph\d"/$svg_javascript$viewport$&/; + + # Insert final </g> above </svg>. + $svg =~ s/(.*)(<\/svg>)/$1<\/g>$2/; + $svg =~ s/<g id="graph\d"(.*?)/<g id="viewport"$1/; + + if ($main::opt_svg) { + # --svg: write to standard output. + print $svg; + } else { + # Write back to temporary file. + open(SVG, ">$svgfile") || die "open $svgfile: $!"; + print SVG $svg; + close(SVG); + } +} + +sub SvgJavascript { + return <<'EOF'; +<script type="text/ecmascript"><![CDATA[ +// SVGPan +// http://www.cyberz.org/blog/2009/12/08/svgpan-a-javascript-svg-panzoomdrag-library/ +// Local modification: if(true || ...) below to force panning, never moving. + +/** + * SVGPan library 1.2 + * ==================== + * + * Given an unique existing element with id "viewport", including the + * the library into any SVG adds the following capabilities: + * + * - Mouse panning + * - Mouse zooming (using the wheel) + * - Object dargging + * + * Known issues: + * + * - Zooming (while panning) on Safari has still some issues + * + * Releases: + * + * 1.2, Sat Mar 20 08:42:50 GMT 2010, Zeng Xiaohui + * Fixed a bug with browser mouse handler interaction + * + * 1.1, Wed Feb 3 17:39:33 GMT 2010, Zeng Xiaohui + * Updated the zoom code to support the mouse wheel on Safari/Chrome + * + * 1.0, Andrea Leofreddi + * First release + * + * This code is licensed under the following BSD license: + * + * Copyright 2009-2010 Andrea Leofreddi <a.leofreddi@itcharm.com>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, are + * permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this list of + * conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, this list + * of conditions and the following disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY Andrea Leofreddi ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL Andrea Leofreddi OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * The views and conclusions contained in the software and documentation are those of the + * authors and should not be interpreted as representing official policies, either expressed + * or implied, of Andrea Leofreddi. + */ + +var root = document.documentElement; + +var state = 'none', stateTarget, stateOrigin, stateTf; + +setupHandlers(root); + +/** + * Register handlers + */ +function setupHandlers(root){ + setAttributes(root, { + "onmouseup" : "add(evt)", + "onmousedown" : "handleMouseDown(evt)", + "onmousemove" : "handleMouseMove(evt)", + "onmouseup" : "handleMouseUp(evt)", + //"onmouseout" : "handleMouseUp(evt)", // Decomment this to stop the pan functionality when dragging out of the SVG element + }); + + if(navigator.userAgent.toLowerCase().indexOf('webkit') >= 0) + window.addEventListener('mousewheel', handleMouseWheel, false); // Chrome/Safari + else + window.addEventListener('DOMMouseScroll', handleMouseWheel, false); // Others + + var g = svgDoc.getElementById("svg"); + g.width = "100%"; + g.height = "100%"; +} + +/** + * Instance an SVGPoint object with given event coordinates. + */ +function getEventPoint(evt) { + var p = root.createSVGPoint(); + + p.x = evt.clientX; + p.y = evt.clientY; + + return p; +} + +/** + * Sets the current transform matrix of an element. + */ +function setCTM(element, matrix) { + var s = "matrix(" + matrix.a + "," + matrix.b + "," + matrix.c + "," + matrix.d + "," + matrix.e + "," + matrix.f + ")"; + + element.setAttribute("transform", s); +} + +/** + * Dumps a matrix to a string (useful for debug). + */ +function dumpMatrix(matrix) { + var s = "[ " + matrix.a + ", " + matrix.c + ", " + matrix.e + "\n " + matrix.b + ", " + matrix.d + ", " + matrix.f + "\n 0, 0, 1 ]"; + + return s; +} + +/** + * Sets attributes of an element. + */ +function setAttributes(element, attributes){ + for (i in attributes) + element.setAttributeNS(null, i, attributes[i]); +} + +/** + * Handle mouse move event. + */ +function handleMouseWheel(evt) { + if(evt.preventDefault) + evt.preventDefault(); + + evt.returnValue = false; + + var svgDoc = evt.target.ownerDocument; + + var delta; + + if(evt.wheelDelta) + delta = evt.wheelDelta / 3600; // Chrome/Safari + else + delta = evt.detail / -90; // Mozilla + + var z = 1 + delta; // Zoom factor: 0.9/1.1 + + var g = svgDoc.getElementById("viewport"); + + var p = getEventPoint(evt); + + p = p.matrixTransform(g.getCTM().inverse()); + + // Compute new scale matrix in current mouse position + var k = root.createSVGMatrix().translate(p.x, p.y).scale(z).translate(-p.x, -p.y); + + setCTM(g, g.getCTM().multiply(k)); + + stateTf = stateTf.multiply(k.inverse()); +} + +/** + * Handle mouse move event. + */ +function handleMouseMove(evt) { + if(evt.preventDefault) + evt.preventDefault(); + + evt.returnValue = false; + + var svgDoc = evt.target.ownerDocument; + + var g = svgDoc.getElementById("viewport"); + + if(state == 'pan') { + // Pan mode + var p = getEventPoint(evt).matrixTransform(stateTf); + + setCTM(g, stateTf.inverse().translate(p.x - stateOrigin.x, p.y - stateOrigin.y)); + } else if(state == 'move') { + // Move mode + var p = getEventPoint(evt).matrixTransform(g.getCTM().inverse()); + + setCTM(stateTarget, root.createSVGMatrix().translate(p.x - stateOrigin.x, p.y - stateOrigin.y).multiply(g.getCTM().inverse()).multiply(stateTarget.getCTM())); + + stateOrigin = p; + } +} + +/** + * Handle click event. + */ +function handleMouseDown(evt) { + if(evt.preventDefault) + evt.preventDefault(); + + evt.returnValue = false; + + var svgDoc = evt.target.ownerDocument; + + var g = svgDoc.getElementById("viewport"); + + if(true || evt.target.tagName == "svg") { + // Pan mode + state = 'pan'; + + stateTf = g.getCTM().inverse(); + + stateOrigin = getEventPoint(evt).matrixTransform(stateTf); + } else { + // Move mode + state = 'move'; + + stateTarget = evt.target; + + stateTf = g.getCTM().inverse(); + + stateOrigin = getEventPoint(evt).matrixTransform(stateTf); + } +} + +/** + * Handle mouse button release event. + */ +function handleMouseUp(evt) { + if(evt.preventDefault) + evt.preventDefault(); + + evt.returnValue = false; + + var svgDoc = evt.target.ownerDocument; + + if(state == 'pan' || state == 'move') { + // Quit pan mode + state = ''; + } +} + +]]></script> +EOF +} + +# Provides a map from fullname to shortname for cases where the +# shortname is ambiguous. The symlist has both the fullname and +# shortname for all symbols, which is usually fine, but sometimes -- +# such as overloaded functions -- two different fullnames can map to +# the same shortname. In that case, we use the address of the +# function to disambiguate the two. This function fills in a map that +# maps fullnames to modified shortnames in such cases. If a fullname +# is not present in the map, the 'normal' shortname provided by the +# symlist is the appropriate one to use. +sub FillFullnameToShortnameMap { + my $symbols = shift; + my $fullname_to_shortname_map = shift; + my $shortnames_seen_once = {}; + my $shortnames_seen_more_than_once = {}; + + foreach my $symlist (values(%{$symbols})) { + # TODO(csilvers): deal with inlined symbols too. + my $shortname = $symlist->[0]; + my $fullname = $symlist->[2]; + if ($fullname !~ /<[0-9a-fA-F]+>$/) { # fullname doesn't end in an address + next; # the only collisions we care about are when addresses differ + } + if (defined($shortnames_seen_once->{$shortname}) && + $shortnames_seen_once->{$shortname} ne $fullname) { + $shortnames_seen_more_than_once->{$shortname} = 1; + } else { + $shortnames_seen_once->{$shortname} = $fullname; + } + } + + foreach my $symlist (values(%{$symbols})) { + my $shortname = $symlist->[0]; + my $fullname = $symlist->[2]; + # TODO(csilvers): take in a list of addresses we care about, and only + # store in the map if $symlist->[1] is in that list. Saves space. + next if defined($fullname_to_shortname_map->{$fullname}); + if (defined($shortnames_seen_more_than_once->{$shortname})) { + if ($fullname =~ /<0*([^>]*)>$/) { # fullname has address at end of it + $fullname_to_shortname_map->{$fullname} = "$shortname\@$1"; + } + } + } +} + +# Return a small number that identifies the argument. +# Multiple calls with the same argument will return the same number. +# Calls with different arguments will return different numbers. +sub ShortIdFor { + my $key = shift; + my $id = $main::uniqueid{$key}; + if (!defined($id)) { + $id = keys(%main::uniqueid) + 1; + $main::uniqueid{$key} = $id; + } + return $id; +} + +# Translate a stack of addresses into a stack of symbols +sub TranslateStack { + my $symbols = shift; + my $fullname_to_shortname_map = shift; + my $k = shift; + + my @addrs = split(/\n/, $k); + my @result = (); + for (my $i = 0; $i <= $#addrs; $i++) { + my $a = $addrs[$i]; + + # Skip large addresses since they sometimes show up as fake entries on RH9 + if (length($a) > 8 && $a gt "7fffffffffffffff") { + next; + } + + if ($main::opt_disasm || $main::opt_list) { + # We want just the address for the key + push(@result, $a); + next; + } + + my $symlist = $symbols->{$a}; + if (!defined($symlist)) { + $symlist = [$a, "", $a]; + } + + # We can have a sequence of symbols for a particular entry + # (more than one symbol in the case of inlining). Callers + # come before callees in symlist, so walk backwards since + # the translated stack should contain callees before callers. + for (my $j = $#{$symlist}; $j >= 2; $j -= 3) { + my $func = $symlist->[$j-2]; + my $fileline = $symlist->[$j-1]; + my $fullfunc = $symlist->[$j]; + if (defined($fullname_to_shortname_map->{$fullfunc})) { + $func = $fullname_to_shortname_map->{$fullfunc}; + } + if ($j > 2) { + $func = "$func (inline)"; + } + + # Do not merge nodes corresponding to Callback::Run since that + # causes confusing cycles in dot display. Instead, we synthesize + # a unique name for this frame per caller. + if ($func =~ m/Callback.*::Run$/) { + my $caller = ($i > 0) ? $addrs[$i-1] : 0; + $func = "Run#" . ShortIdFor($caller); + } + + if ($main::opt_addresses) { + push(@result, "$a $func $fileline"); + } elsif ($main::opt_lines) { + if ($func eq '??' && $fileline eq '??:0') { + push(@result, "$a"); + } else { + push(@result, "$func $fileline"); + } + } elsif ($main::opt_functions) { + if ($func eq '??') { + push(@result, "$a"); + } else { + push(@result, $func); + } + } elsif ($main::opt_files) { + if ($fileline eq '??:0' || $fileline eq '') { + push(@result, "$a"); + } else { + my $f = $fileline; + $f =~ s/:\d+$//; + push(@result, $f); + } + } else { + push(@result, $a); + last; # Do not print inlined info + } + } + } + + # print join(",", @addrs), " => ", join(",", @result), "\n"; + return @result; +} + +# Generate percent string for a number and a total +sub Percent { + my $num = shift; + my $tot = shift; + if ($tot != 0) { + return sprintf("%.1f%%", $num * 100.0 / $tot); + } else { + return ($num == 0) ? "nan" : (($num > 0) ? "+inf" : "-inf"); + } +} + +# Generate pretty-printed form of number +sub Unparse { + my $num = shift; + if ($main::profile_type eq 'heap' || $main::profile_type eq 'growth') { + if ($main::opt_inuse_objects || $main::opt_alloc_objects) { + return sprintf("%d", $num); + } else { + if ($main::opt_show_bytes) { + return sprintf("%d", $num); + } else { + return sprintf("%.1f", $num / 1048576.0); + } + } + } elsif ($main::profile_type eq 'contention' && !$main::opt_contentions) { + return sprintf("%.3f", $num / 1e9); # Convert nanoseconds to seconds + } else { + return sprintf("%d", $num); + } +} + +# Alternate pretty-printed form: 0 maps to "." +sub UnparseAlt { + my $num = shift; + if ($num == 0) { + return "."; + } else { + return Unparse($num); + } +} + +# Alternate pretty-printed form: 0 maps to "" +sub HtmlPrintNumber { + my $num = shift; + if ($num == 0) { + return ""; + } else { + return Unparse($num); + } +} + +# Return output units +sub Units { + if ($main::profile_type eq 'heap' || $main::profile_type eq 'growth') { + if ($main::opt_inuse_objects || $main::opt_alloc_objects) { + return "objects"; + } else { + if ($main::opt_show_bytes) { + return "B"; + } else { + return "MB"; + } + } + } elsif ($main::profile_type eq 'contention' && !$main::opt_contentions) { + return "seconds"; + } else { + return "samples"; + } +} + +##### Profile manipulation code ##### + +# Generate flattened profile: +# If count is charged to stack [a,b,c,d], in generated profile, +# it will be charged to [a] +sub FlatProfile { + my $profile = shift; + my $result = {}; + foreach my $k (keys(%{$profile})) { + my $count = $profile->{$k}; + my @addrs = split(/\n/, $k); + if ($#addrs >= 0) { + AddEntry($result, $addrs[0], $count); + } + } + return $result; +} + +# Generate cumulative profile: +# If count is charged to stack [a,b,c,d], in generated profile, +# it will be charged to [a], [b], [c], [d] +sub CumulativeProfile { + my $profile = shift; + my $result = {}; + foreach my $k (keys(%{$profile})) { + my $count = $profile->{$k}; + my @addrs = split(/\n/, $k); + foreach my $a (@addrs) { + AddEntry($result, $a, $count); + } + } + return $result; +} + +# If the second-youngest PC on the stack is always the same, returns +# that pc. Otherwise, returns undef. +sub IsSecondPcAlwaysTheSame { + my $profile = shift; + + my $second_pc = undef; + foreach my $k (keys(%{$profile})) { + my @addrs = split(/\n/, $k); + if ($#addrs < 1) { + return undef; + } + if (not defined $second_pc) { + $second_pc = $addrs[1]; + } else { + if ($second_pc ne $addrs[1]) { + return undef; + } + } + } + return $second_pc; +} + +sub ExtractSymbolLocation { + my $symbols = shift; + my $address = shift; + # 'addr2line' outputs "??:0" for unknown locations; we do the + # same to be consistent. + my $location = "??:0:unknown"; + if (exists $symbols->{$address}) { + my $file = $symbols->{$address}->[1]; + if ($file eq "?") { + $file = "??:0" + } + $location = $file . ":" . $symbols->{$address}->[0]; + } + return $location; +} + +# Extracts a graph of calls. +sub ExtractCalls { + my $symbols = shift; + my $profile = shift; + + my $calls = {}; + while( my ($stack_trace, $count) = each %$profile ) { + my @address = split(/\n/, $stack_trace); + my $destination = ExtractSymbolLocation($symbols, $address[0]); + AddEntry($calls, $destination, $count); + for (my $i = 1; $i <= $#address; $i++) { + my $source = ExtractSymbolLocation($symbols, $address[$i]); + my $call = "$source -> $destination"; + AddEntry($calls, $call, $count); + $destination = $source; + } + } + + return $calls; +} + +sub FilterFrames { + my $symbols = shift; + my $profile = shift; + + if ($main::opt_retain eq '' && $main::opt_exclude eq '') { + return $profile; + } + + my $result = {}; + foreach my $k (keys(%{$profile})) { + my $count = $profile->{$k}; + my @addrs = split(/\n/, $k); + my @path = (); + foreach my $a (@addrs) { + my $sym; + if (exists($symbols->{$a})) { + $sym = $symbols->{$a}->[0]; + } else { + $sym = $a; + } + if ($main::opt_retain ne '' && $sym !~ m/$main::opt_retain/) { + next; + } + if ($main::opt_exclude ne '' && $sym =~ m/$main::opt_exclude/) { + next; + } + push(@path, $a); + } + if (scalar(@path) > 0) { + my $reduced_path = join("\n", @path); + AddEntry($result, $reduced_path, $count); + } + } + + return $result; +} + +sub RemoveUninterestingFrames { + my $symbols = shift; + my $profile = shift; + + # List of function names to skip + my %skip = (); + my $skip_regexp = 'NOMATCH'; + if ($main::profile_type eq 'heap' || $main::profile_type eq 'growth') { + foreach my $name ('calloc', + 'cfree', + 'malloc', + 'free', + 'memalign', + 'posix_memalign', + 'aligned_alloc', + 'pvalloc', + 'valloc', + 'realloc', + 'mallocx', # jemalloc + 'rallocx', # jemalloc + 'xallocx', # jemalloc + 'dallocx', # jemalloc + 'sdallocx', # jemalloc + 'tc_calloc', + 'tc_cfree', + 'tc_malloc', + 'tc_free', + 'tc_memalign', + 'tc_posix_memalign', + 'tc_pvalloc', + 'tc_valloc', + 'tc_realloc', + 'tc_new', + 'tc_delete', + 'tc_newarray', + 'tc_deletearray', + 'tc_new_nothrow', + 'tc_newarray_nothrow', + 'do_malloc', + '::do_malloc', # new name -- got moved to an unnamed ns + '::do_malloc_or_cpp_alloc', + 'DoSampledAllocation', + 'simple_alloc::allocate', + '__malloc_alloc_template::allocate', + '__builtin_delete', + '__builtin_new', + '__builtin_vec_delete', + '__builtin_vec_new', + 'operator new', + 'operator new[]', + # The entry to our memory-allocation routines on OS X + 'malloc_zone_malloc', + 'malloc_zone_calloc', + 'malloc_zone_valloc', + 'malloc_zone_realloc', + 'malloc_zone_memalign', + 'malloc_zone_free', + # These mark the beginning/end of our custom sections + '__start_google_malloc', + '__stop_google_malloc', + '__start_malloc_hook', + '__stop_malloc_hook') { + $skip{$name} = 1; + $skip{"_" . $name} = 1; # Mach (OS X) adds a _ prefix to everything + } + # TODO: Remove TCMalloc once everything has been + # moved into the tcmalloc:: namespace and we have flushed + # old code out of the system. + $skip_regexp = "TCMalloc|^tcmalloc::"; + } elsif ($main::profile_type eq 'contention') { + foreach my $vname ('base::RecordLockProfileData', + 'base::SubmitMutexProfileData', + 'base::SubmitSpinLockProfileData', + 'Mutex::Unlock', + 'Mutex::UnlockSlow', + 'Mutex::ReaderUnlock', + 'MutexLock::~MutexLock', + 'SpinLock::Unlock', + 'SpinLock::SlowUnlock', + 'SpinLockHolder::~SpinLockHolder') { + $skip{$vname} = 1; + } + } elsif ($main::profile_type eq 'cpu') { + # Drop signal handlers used for CPU profile collection + # TODO(dpeng): this should not be necessary; it's taken + # care of by the general 2nd-pc mechanism below. + foreach my $name ('ProfileData::Add', # historical + 'ProfileData::prof_handler', # historical + 'CpuProfiler::prof_handler', + '__FRAME_END__', + '__pthread_sighandler', + '__restore') { + $skip{$name} = 1; + } + } else { + # Nothing skipped for unknown types + } + + if ($main::profile_type eq 'cpu') { + # If all the second-youngest program counters are the same, + # this STRONGLY suggests that it is an artifact of measurement, + # i.e., stack frames pushed by the CPU profiler signal handler. + # Hence, we delete them. + # (The topmost PC is read from the signal structure, not from + # the stack, so it does not get involved.) + while (my $second_pc = IsSecondPcAlwaysTheSame($profile)) { + my $result = {}; + my $func = ''; + if (exists($symbols->{$second_pc})) { + $second_pc = $symbols->{$second_pc}->[0]; + } + print STDERR "Removing $second_pc from all stack traces.\n"; + foreach my $k (keys(%{$profile})) { + my $count = $profile->{$k}; + my @addrs = split(/\n/, $k); + splice @addrs, 1, 1; + my $reduced_path = join("\n", @addrs); + AddEntry($result, $reduced_path, $count); + } + $profile = $result; + } + } + + my $result = {}; + foreach my $k (keys(%{$profile})) { + my $count = $profile->{$k}; + my @addrs = split(/\n/, $k); + my @path = (); + foreach my $a (@addrs) { + if (exists($symbols->{$a})) { + my $func = $symbols->{$a}->[0]; + if ($skip{$func} || ($func =~ m/$skip_regexp/)) { + # Throw away the portion of the backtrace seen so far, under the + # assumption that previous frames were for functions internal to the + # allocator. + @path = (); + next; + } + } + push(@path, $a); + } + my $reduced_path = join("\n", @path); + AddEntry($result, $reduced_path, $count); + } + + $result = FilterFrames($symbols, $result); + + return $result; +} + +# Reduce profile to granularity given by user +sub ReduceProfile { + my $symbols = shift; + my $profile = shift; + my $result = {}; + my $fullname_to_shortname_map = {}; + FillFullnameToShortnameMap($symbols, $fullname_to_shortname_map); + foreach my $k (keys(%{$profile})) { + my $count = $profile->{$k}; + my @translated = TranslateStack($symbols, $fullname_to_shortname_map, $k); + my @path = (); + my %seen = (); + $seen{''} = 1; # So that empty keys are skipped + foreach my $e (@translated) { + # To avoid double-counting due to recursion, skip a stack-trace + # entry if it has already been seen + if (!$seen{$e}) { + $seen{$e} = 1; + push(@path, $e); + } + } + my $reduced_path = join("\n", @path); + AddEntry($result, $reduced_path, $count); + } + return $result; +} + +# Does the specified symbol array match the regexp? +sub SymbolMatches { + my $sym = shift; + my $re = shift; + if (defined($sym)) { + for (my $i = 0; $i < $#{$sym}; $i += 3) { + if ($sym->[$i] =~ m/$re/ || $sym->[$i+1] =~ m/$re/) { + return 1; + } + } + } + return 0; +} + +# Focus only on paths involving specified regexps +sub FocusProfile { + my $symbols = shift; + my $profile = shift; + my $focus = shift; + my $result = {}; + foreach my $k (keys(%{$profile})) { + my $count = $profile->{$k}; + my @addrs = split(/\n/, $k); + foreach my $a (@addrs) { + # Reply if it matches either the address/shortname/fileline + if (($a =~ m/$focus/) || SymbolMatches($symbols->{$a}, $focus)) { + AddEntry($result, $k, $count); + last; + } + } + } + return $result; +} + +# Focus only on paths not involving specified regexps +sub IgnoreProfile { + my $symbols = shift; + my $profile = shift; + my $ignore = shift; + my $result = {}; + foreach my $k (keys(%{$profile})) { + my $count = $profile->{$k}; + my @addrs = split(/\n/, $k); + my $matched = 0; + foreach my $a (@addrs) { + # Reply if it matches either the address/shortname/fileline + if (($a =~ m/$ignore/) || SymbolMatches($symbols->{$a}, $ignore)) { + $matched = 1; + last; + } + } + if (!$matched) { + AddEntry($result, $k, $count); + } + } + return $result; +} + +# Get total count in profile +sub TotalProfile { + my $profile = shift; + my $result = 0; + foreach my $k (keys(%{$profile})) { + $result += $profile->{$k}; + } + return $result; +} + +# Add A to B +sub AddProfile { + my $A = shift; + my $B = shift; + + my $R = {}; + # add all keys in A + foreach my $k (keys(%{$A})) { + my $v = $A->{$k}; + AddEntry($R, $k, $v); + } + # add all keys in B + foreach my $k (keys(%{$B})) { + my $v = $B->{$k}; + AddEntry($R, $k, $v); + } + return $R; +} + +# Merges symbol maps +sub MergeSymbols { + my $A = shift; + my $B = shift; + + my $R = {}; + foreach my $k (keys(%{$A})) { + $R->{$k} = $A->{$k}; + } + if (defined($B)) { + foreach my $k (keys(%{$B})) { + $R->{$k} = $B->{$k}; + } + } + return $R; +} + + +# Add A to B +sub AddPcs { + my $A = shift; + my $B = shift; + + my $R = {}; + # add all keys in A + foreach my $k (keys(%{$A})) { + $R->{$k} = 1 + } + # add all keys in B + foreach my $k (keys(%{$B})) { + $R->{$k} = 1 + } + return $R; +} + +# Subtract B from A +sub SubtractProfile { + my $A = shift; + my $B = shift; + + my $R = {}; + foreach my $k (keys(%{$A})) { + my $v = $A->{$k} - GetEntry($B, $k); + if ($v < 0 && $main::opt_drop_negative) { + $v = 0; + } + AddEntry($R, $k, $v); + } + if (!$main::opt_drop_negative) { + # Take care of when subtracted profile has more entries + foreach my $k (keys(%{$B})) { + if (!exists($A->{$k})) { + AddEntry($R, $k, 0 - $B->{$k}); + } + } + } + return $R; +} + +# Get entry from profile; zero if not present +sub GetEntry { + my $profile = shift; + my $k = shift; + if (exists($profile->{$k})) { + return $profile->{$k}; + } else { + return 0; + } +} + +# Add entry to specified profile +sub AddEntry { + my $profile = shift; + my $k = shift; + my $n = shift; + if (!exists($profile->{$k})) { + $profile->{$k} = 0; + } + $profile->{$k} += $n; +} + +# Add a stack of entries to specified profile, and add them to the $pcs +# list. +sub AddEntries { + my $profile = shift; + my $pcs = shift; + my $stack = shift; + my $count = shift; + my @k = (); + + foreach my $e (split(/\s+/, $stack)) { + my $pc = HexExtend($e); + $pcs->{$pc} = 1; + push @k, $pc; + } + AddEntry($profile, (join "\n", @k), $count); +} + +##### Code to profile a server dynamically ##### + +sub CheckSymbolPage { + my $url = SymbolPageURL(); + my $command = ShellEscape(@URL_FETCHER, $url); + open(SYMBOL, "$command |") or error($command); + my $line = <SYMBOL>; + $line =~ s/\r//g; # turn windows-looking lines into unix-looking lines + close(SYMBOL); + unless (defined($line)) { + error("$url doesn't exist\n"); + } + + if ($line =~ /^num_symbols:\s+(\d+)$/) { + if ($1 == 0) { + error("Stripped binary. No symbols available.\n"); + } + } else { + error("Failed to get the number of symbols from $url\n"); + } +} + +sub IsProfileURL { + my $profile_name = shift; + if (-f $profile_name) { + printf STDERR "Using local file $profile_name.\n"; + return 0; + } + return 1; +} + +sub ParseProfileURL { + my $profile_name = shift; + + if (!defined($profile_name) || $profile_name eq "") { + return (); + } + + # Split profile URL - matches all non-empty strings, so no test. + $profile_name =~ m,^(https?://)?([^/]+)(.*?)(/|$PROFILES)?$,; + + my $proto = $1 || "http://"; + my $hostport = $2; + my $prefix = $3; + my $profile = $4 || "/"; + + my $host = $hostport; + $host =~ s/:.*//; + + my $baseurl = "$proto$hostport$prefix"; + return ($host, $baseurl, $profile); +} + +# We fetch symbols from the first profile argument. +sub SymbolPageURL { + my ($host, $baseURL, $path) = ParseProfileURL($main::pfile_args[0]); + return "$baseURL$SYMBOL_PAGE"; +} + +sub FetchProgramName() { + my ($host, $baseURL, $path) = ParseProfileURL($main::pfile_args[0]); + my $url = "$baseURL$PROGRAM_NAME_PAGE"; + my $command_line = ShellEscape(@URL_FETCHER, $url); + open(CMDLINE, "$command_line |") or error($command_line); + my $cmdline = <CMDLINE>; + $cmdline =~ s/\r//g; # turn windows-looking lines into unix-looking lines + close(CMDLINE); + error("Failed to get program name from $url\n") unless defined($cmdline); + $cmdline =~ s/\x00.+//; # Remove argv[1] and latters. + $cmdline =~ s!\n!!g; # Remove LFs. + return $cmdline; +} + +# Gee, curl's -L (--location) option isn't reliable at least +# with its 7.12.3 version. Curl will forget to post data if +# there is a redirection. This function is a workaround for +# curl. Redirection happens on borg hosts. +sub ResolveRedirectionForCurl { + my $url = shift; + my $command_line = ShellEscape(@URL_FETCHER, "--head", $url); + open(CMDLINE, "$command_line |") or error($command_line); + while (<CMDLINE>) { + s/\r//g; # turn windows-looking lines into unix-looking lines + if (/^Location: (.*)/) { + $url = $1; + } + } + close(CMDLINE); + return $url; +} + +# Add a timeout flat to URL_FETCHER. Returns a new list. +sub AddFetchTimeout { + my $timeout = shift; + my @fetcher = @_; + if (defined($timeout)) { + if (join(" ", @fetcher) =~ m/\bcurl -s/) { + push(@fetcher, "--max-time", sprintf("%d", $timeout)); + } elsif (join(" ", @fetcher) =~ m/\brpcget\b/) { + push(@fetcher, sprintf("--deadline=%d", $timeout)); + } + } + return @fetcher; +} + +# Reads a symbol map from the file handle name given as $1, returning +# the resulting symbol map. Also processes variables relating to symbols. +# Currently, the only variable processed is 'binary=<value>' which updates +# $main::prog to have the correct program name. +sub ReadSymbols { + my $in = shift; + my $map = {}; + while (<$in>) { + s/\r//g; # turn windows-looking lines into unix-looking lines + # Removes all the leading zeroes from the symbols, see comment below. + if (m/^0x0*([0-9a-f]+)\s+(.+)/) { + $map->{$1} = $2; + } elsif (m/^---/) { + last; + } elsif (m/^([a-z][^=]*)=(.*)$/ ) { + my ($variable, $value) = ($1, $2); + for ($variable, $value) { + s/^\s+//; + s/\s+$//; + } + if ($variable eq "binary") { + if ($main::prog ne $UNKNOWN_BINARY && $main::prog ne $value) { + printf STDERR ("Warning: Mismatched binary name '%s', using '%s'.\n", + $main::prog, $value); + } + $main::prog = $value; + } else { + printf STDERR ("Ignoring unknown variable in symbols list: " . + "'%s' = '%s'\n", $variable, $value); + } + } + } + return $map; +} + +sub URLEncode { + my $str = shift; + $str =~ s/([^A-Za-z0-9\-_.!~*'()])/ sprintf "%%%02x", ord $1 /eg; + return $str; +} + +sub AppendSymbolFilterParams { + my $url = shift; + my @params = (); + if ($main::opt_retain ne '') { + push(@params, sprintf("retain=%s", URLEncode($main::opt_retain))); + } + if ($main::opt_exclude ne '') { + push(@params, sprintf("exclude=%s", URLEncode($main::opt_exclude))); + } + if (scalar @params > 0) { + $url = sprintf("%s?%s", $url, join("&", @params)); + } + return $url; +} + +# Fetches and processes symbols to prepare them for use in the profile output +# code. If the optional 'symbol_map' arg is not given, fetches symbols from +# $SYMBOL_PAGE for all PC values found in profile. Otherwise, the raw symbols +# are assumed to have already been fetched into 'symbol_map' and are simply +# extracted and processed. +sub FetchSymbols { + my $pcset = shift; + my $symbol_map = shift; + + my %seen = (); + my @pcs = grep { !$seen{$_}++ } keys(%$pcset); # uniq + + if (!defined($symbol_map)) { + my $post_data = join("+", sort((map {"0x" . "$_"} @pcs))); + + open(POSTFILE, ">$main::tmpfile_sym"); + print POSTFILE $post_data; + close(POSTFILE); + + my $url = SymbolPageURL(); + + my $command_line; + if (join(" ", @URL_FETCHER) =~ m/\bcurl -s/) { + $url = ResolveRedirectionForCurl($url); + $url = AppendSymbolFilterParams($url); + $command_line = ShellEscape(@URL_FETCHER, "-d", "\@$main::tmpfile_sym", + $url); + } else { + $url = AppendSymbolFilterParams($url); + $command_line = (ShellEscape(@URL_FETCHER, "--post", $url) + . " < " . ShellEscape($main::tmpfile_sym)); + } + # We use c++filt in case $SYMBOL_PAGE gives us mangled symbols. + my $escaped_cppfilt = ShellEscape($obj_tool_map{"c++filt"}); + open(SYMBOL, "$command_line | $escaped_cppfilt |") or error($command_line); + $symbol_map = ReadSymbols(*SYMBOL{IO}); + close(SYMBOL); + } + + my $symbols = {}; + foreach my $pc (@pcs) { + my $fullname; + # For 64 bits binaries, symbols are extracted with 8 leading zeroes. + # Then /symbol reads the long symbols in as uint64, and outputs + # the result with a "0x%08llx" format which get rid of the zeroes. + # By removing all the leading zeroes in both $pc and the symbols from + # /symbol, the symbols match and are retrievable from the map. + my $shortpc = $pc; + $shortpc =~ s/^0*//; + # Each line may have a list of names, which includes the function + # and also other functions it has inlined. They are separated (in + # PrintSymbolizedProfile), by --, which is illegal in function names. + my $fullnames; + if (defined($symbol_map->{$shortpc})) { + $fullnames = $symbol_map->{$shortpc}; + } else { + $fullnames = "0x" . $pc; # Just use addresses + } + my $sym = []; + $symbols->{$pc} = $sym; + foreach my $fullname (split("--", $fullnames)) { + my $name = ShortFunctionName($fullname); + push(@{$sym}, $name, "?", $fullname); + } + } + return $symbols; +} + +sub BaseName { + my $file_name = shift; + $file_name =~ s!^.*/!!; # Remove directory name + return $file_name; +} + +sub MakeProfileBaseName { + my ($binary_name, $profile_name) = @_; + my ($host, $baseURL, $path) = ParseProfileURL($profile_name); + my $binary_shortname = BaseName($binary_name); + return sprintf("%s.%s.%s", + $binary_shortname, $main::op_time, $host); +} + +sub FetchDynamicProfile { + my $binary_name = shift; + my $profile_name = shift; + my $fetch_name_only = shift; + my $encourage_patience = shift; + + if (!IsProfileURL($profile_name)) { + return $profile_name; + } else { + my ($host, $baseURL, $path) = ParseProfileURL($profile_name); + if ($path eq "" || $path eq "/") { + # Missing type specifier defaults to cpu-profile + $path = $PROFILE_PAGE; + } + + my $profile_file = MakeProfileBaseName($binary_name, $profile_name); + + my $url = "$baseURL$path"; + my $fetch_timeout = undef; + if ($path =~ m/$PROFILE_PAGE|$PMUPROFILE_PAGE/) { + if ($path =~ m/[?]/) { + $url .= "&"; + } else { + $url .= "?"; + } + $url .= sprintf("seconds=%d", $main::opt_seconds); + $fetch_timeout = $main::opt_seconds * 1.01 + 60; + # Set $profile_type for consumption by PrintSymbolizedProfile. + $main::profile_type = 'cpu'; + } else { + # For non-CPU profiles, we add a type-extension to + # the target profile file name. + my $suffix = $path; + $suffix =~ s,/,.,g; + $profile_file .= $suffix; + # Set $profile_type for consumption by PrintSymbolizedProfile. + if ($path =~ m/$HEAP_PAGE/) { + $main::profile_type = 'heap'; + } elsif ($path =~ m/$GROWTH_PAGE/) { + $main::profile_type = 'growth'; + } elsif ($path =~ m/$CONTENTION_PAGE/) { + $main::profile_type = 'contention'; + } + } + + my $profile_dir = $ENV{"JEPROF_TMPDIR"} || ($ENV{HOME} . "/jeprof"); + if (! -d $profile_dir) { + mkdir($profile_dir) + || die("Unable to create profile directory $profile_dir: $!\n"); + } + my $tmp_profile = "$profile_dir/.tmp.$profile_file"; + my $real_profile = "$profile_dir/$profile_file"; + + if ($fetch_name_only > 0) { + return $real_profile; + } + + my @fetcher = AddFetchTimeout($fetch_timeout, @URL_FETCHER); + my $cmd = ShellEscape(@fetcher, $url) . " > " . ShellEscape($tmp_profile); + if ($path =~ m/$PROFILE_PAGE|$PMUPROFILE_PAGE|$CENSUSPROFILE_PAGE/){ + print STDERR "Gathering CPU profile from $url for $main::opt_seconds seconds to\n ${real_profile}\n"; + if ($encourage_patience) { + print STDERR "Be patient...\n"; + } + } else { + print STDERR "Fetching $path profile from $url to\n ${real_profile}\n"; + } + + (system($cmd) == 0) || error("Failed to get profile: $cmd: $!\n"); + (system("mv", $tmp_profile, $real_profile) == 0) || error("Unable to rename profile\n"); + print STDERR "Wrote profile to $real_profile\n"; + $main::collected_profile = $real_profile; + return $main::collected_profile; + } +} + +# Collect profiles in parallel +sub FetchDynamicProfiles { + my $items = scalar(@main::pfile_args); + my $levels = log($items) / log(2); + + if ($items == 1) { + $main::profile_files[0] = FetchDynamicProfile($main::prog, $main::pfile_args[0], 0, 1); + } else { + # math rounding issues + if ((2 ** $levels) < $items) { + $levels++; + } + my $count = scalar(@main::pfile_args); + for (my $i = 0; $i < $count; $i++) { + $main::profile_files[$i] = FetchDynamicProfile($main::prog, $main::pfile_args[$i], 1, 0); + } + print STDERR "Fetching $count profiles, Be patient...\n"; + FetchDynamicProfilesRecurse($levels, 0, 0); + $main::collected_profile = join(" \\\n ", @main::profile_files); + } +} + +# Recursively fork a process to get enough processes +# collecting profiles +sub FetchDynamicProfilesRecurse { + my $maxlevel = shift; + my $level = shift; + my $position = shift; + + if (my $pid = fork()) { + $position = 0 | ($position << 1); + TryCollectProfile($maxlevel, $level, $position); + wait; + } else { + $position = 1 | ($position << 1); + TryCollectProfile($maxlevel, $level, $position); + cleanup(); + exit(0); + } +} + +# Collect a single profile +sub TryCollectProfile { + my $maxlevel = shift; + my $level = shift; + my $position = shift; + + if ($level >= ($maxlevel - 1)) { + if ($position < scalar(@main::pfile_args)) { + FetchDynamicProfile($main::prog, $main::pfile_args[$position], 0, 0); + } + } else { + FetchDynamicProfilesRecurse($maxlevel, $level+1, $position); + } +} + +##### Parsing code ##### + +# Provide a small streaming-read module to handle very large +# cpu-profile files. Stream in chunks along a sliding window. +# Provides an interface to get one 'slot', correctly handling +# endian-ness differences. A slot is one 32-bit or 64-bit word +# (depending on the input profile). We tell endianness and bit-size +# for the profile by looking at the first 8 bytes: in cpu profiles, +# the second slot is always 3 (we'll accept anything that's not 0). +BEGIN { + package CpuProfileStream; + + sub new { + my ($class, $file, $fname) = @_; + my $self = { file => $file, + base => 0, + stride => 512 * 1024, # must be a multiple of bitsize/8 + slots => [], + unpack_code => "", # N for big-endian, V for little + perl_is_64bit => 1, # matters if profile is 64-bit + }; + bless $self, $class; + # Let unittests adjust the stride + if ($main::opt_test_stride > 0) { + $self->{stride} = $main::opt_test_stride; + } + # Read the first two slots to figure out bitsize and endianness. + my $slots = $self->{slots}; + my $str; + read($self->{file}, $str, 8); + # Set the global $address_length based on what we see here. + # 8 is 32-bit (8 hexadecimal chars); 16 is 64-bit (16 hexadecimal chars). + $address_length = ($str eq (chr(0)x8)) ? 16 : 8; + if ($address_length == 8) { + if (substr($str, 6, 2) eq chr(0)x2) { + $self->{unpack_code} = 'V'; # Little-endian. + } elsif (substr($str, 4, 2) eq chr(0)x2) { + $self->{unpack_code} = 'N'; # Big-endian + } else { + ::error("$fname: header size >= 2**16\n"); + } + @$slots = unpack($self->{unpack_code} . "*", $str); + } else { + # If we're a 64-bit profile, check if we're a 64-bit-capable + # perl. Otherwise, each slot will be represented as a float + # instead of an int64, losing precision and making all the + # 64-bit addresses wrong. We won't complain yet, but will + # later if we ever see a value that doesn't fit in 32 bits. + my $has_q = 0; + eval { $has_q = pack("Q", "1") ? 1 : 1; }; + if (!$has_q) { + $self->{perl_is_64bit} = 0; + } + read($self->{file}, $str, 8); + if (substr($str, 4, 4) eq chr(0)x4) { + # We'd love to use 'Q', but it's a) not universal, b) not endian-proof. + $self->{unpack_code} = 'V'; # Little-endian. + } elsif (substr($str, 0, 4) eq chr(0)x4) { + $self->{unpack_code} = 'N'; # Big-endian + } else { + ::error("$fname: header size >= 2**32\n"); + } + my @pair = unpack($self->{unpack_code} . "*", $str); + # Since we know one of the pair is 0, it's fine to just add them. + @$slots = (0, $pair[0] + $pair[1]); + } + return $self; + } + + # Load more data when we access slots->get(X) which is not yet in memory. + sub overflow { + my ($self) = @_; + my $slots = $self->{slots}; + $self->{base} += $#$slots + 1; # skip over data we're replacing + my $str; + read($self->{file}, $str, $self->{stride}); + if ($address_length == 8) { # the 32-bit case + # This is the easy case: unpack provides 32-bit unpacking primitives. + @$slots = unpack($self->{unpack_code} . "*", $str); + } else { + # We need to unpack 32 bits at a time and combine. + my @b32_values = unpack($self->{unpack_code} . "*", $str); + my @b64_values = (); + for (my $i = 0; $i < $#b32_values; $i += 2) { + # TODO(csilvers): if this is a 32-bit perl, the math below + # could end up in a too-large int, which perl will promote + # to a double, losing necessary precision. Deal with that. + # Right now, we just die. + my ($lo, $hi) = ($b32_values[$i], $b32_values[$i+1]); + if ($self->{unpack_code} eq 'N') { # big-endian + ($lo, $hi) = ($hi, $lo); + } + my $value = $lo + $hi * (2**32); + if (!$self->{perl_is_64bit} && # check value is exactly represented + (($value % (2**32)) != $lo || int($value / (2**32)) != $hi)) { + ::error("Need a 64-bit perl to process this 64-bit profile.\n"); + } + push(@b64_values, $value); + } + @$slots = @b64_values; + } + } + + # Access the i-th long in the file (logically), or -1 at EOF. + sub get { + my ($self, $idx) = @_; + my $slots = $self->{slots}; + while ($#$slots >= 0) { + if ($idx < $self->{base}) { + # The only time we expect a reference to $slots[$i - something] + # after referencing $slots[$i] is reading the very first header. + # Since $stride > |header|, that shouldn't cause any lookback + # errors. And everything after the header is sequential. + print STDERR "Unexpected look-back reading CPU profile"; + return -1; # shrug, don't know what better to return + } elsif ($idx > $self->{base} + $#$slots) { + $self->overflow(); + } else { + return $slots->[$idx - $self->{base}]; + } + } + # If we get here, $slots is [], which means we've reached EOF + return -1; # unique since slots is supposed to hold unsigned numbers + } +} + +# Reads the top, 'header' section of a profile, and returns the last +# line of the header, commonly called a 'header line'. The header +# section of a profile consists of zero or more 'command' lines that +# are instructions to jeprof, which jeprof executes when reading the +# header. All 'command' lines start with a %. After the command +# lines is the 'header line', which is a profile-specific line that +# indicates what type of profile it is, and perhaps other global +# information about the profile. For instance, here's a header line +# for a heap profile: +# heap profile: 53: 38236 [ 5525: 1284029] @ heapprofile +# For historical reasons, the CPU profile does not contain a text- +# readable header line. If the profile looks like a CPU profile, +# this function returns "". If no header line could be found, this +# function returns undef. +# +# The following commands are recognized: +# %warn -- emit the rest of this line to stderr, prefixed by 'WARNING:' +# +# The input file should be in binmode. +sub ReadProfileHeader { + local *PROFILE = shift; + my $firstchar = ""; + my $line = ""; + read(PROFILE, $firstchar, 1); + seek(PROFILE, -1, 1); # unread the firstchar + if ($firstchar !~ /[[:print:]]/) { # is not a text character + return ""; + } + while (defined($line = <PROFILE>)) { + $line =~ s/\r//g; # turn windows-looking lines into unix-looking lines + if ($line =~ /^%warn\s+(.*)/) { # 'warn' command + # Note this matches both '%warn blah\n' and '%warn\n'. + print STDERR "WARNING: $1\n"; # print the rest of the line + } elsif ($line =~ /^%/) { + print STDERR "Ignoring unknown command from profile header: $line"; + } else { + # End of commands, must be the header line. + return $line; + } + } + return undef; # got to EOF without seeing a header line +} + +sub IsSymbolizedProfileFile { + my $file_name = shift; + if (!(-e $file_name) || !(-r $file_name)) { + return 0; + } + # Check if the file contains a symbol-section marker. + open(TFILE, "<$file_name"); + binmode TFILE; + my $firstline = ReadProfileHeader(*TFILE); + close(TFILE); + if (!$firstline) { + return 0; + } + $SYMBOL_PAGE =~ m,[^/]+$,; # matches everything after the last slash + my $symbol_marker = $&; + return $firstline =~ /^--- *$symbol_marker/; +} + +# Parse profile generated by common/profiler.cc and return a reference +# to a map: +# $result->{version} Version number of profile file +# $result->{period} Sampling period (in microseconds) +# $result->{profile} Profile object +# $result->{threads} Map of thread IDs to profile objects +# $result->{map} Memory map info from profile +# $result->{pcs} Hash of all PC values seen, key is hex address +sub ReadProfile { + my $prog = shift; + my $fname = shift; + my $result; # return value + + $CONTENTION_PAGE =~ m,[^/]+$,; # matches everything after the last slash + my $contention_marker = $&; + $GROWTH_PAGE =~ m,[^/]+$,; # matches everything after the last slash + my $growth_marker = $&; + $SYMBOL_PAGE =~ m,[^/]+$,; # matches everything after the last slash + my $symbol_marker = $&; + $PROFILE_PAGE =~ m,[^/]+$,; # matches everything after the last slash + my $profile_marker = $&; + $HEAP_PAGE =~ m,[^/]+$,; # matches everything after the last slash + my $heap_marker = $&; + + # Look at first line to see if it is a heap or a CPU profile. + # CPU profile may start with no header at all, and just binary data + # (starting with \0\0\0\0) -- in that case, don't try to read the + # whole firstline, since it may be gigabytes(!) of data. + open(PROFILE, "<$fname") || error("$fname: $!\n"); + binmode PROFILE; # New perls do UTF-8 processing + my $header = ReadProfileHeader(*PROFILE); + if (!defined($header)) { # means "at EOF" + error("Profile is empty.\n"); + } + + my $symbols; + if ($header =~ m/^--- *$symbol_marker/o) { + # Verify that the user asked for a symbolized profile + if (!$main::use_symbolized_profile) { + # we have both a binary and symbolized profiles, abort + error("FATAL ERROR: Symbolized profile\n $fname\ncannot be used with " . + "a binary arg. Try again without passing\n $prog\n"); + } + # Read the symbol section of the symbolized profile file. + $symbols = ReadSymbols(*PROFILE{IO}); + # Read the next line to get the header for the remaining profile. + $header = ReadProfileHeader(*PROFILE) || ""; + } + + if ($header =~ m/^--- *($heap_marker|$growth_marker)/o) { + # Skip "--- ..." line for profile types that have their own headers. + $header = ReadProfileHeader(*PROFILE) || ""; + } + + $main::profile_type = ''; + + if ($header =~ m/^heap profile:.*$growth_marker/o) { + $main::profile_type = 'growth'; + $result = ReadHeapProfile($prog, *PROFILE, $header); + } elsif ($header =~ m/^heap profile:/) { + $main::profile_type = 'heap'; + $result = ReadHeapProfile($prog, *PROFILE, $header); + } elsif ($header =~ m/^heap/) { + $main::profile_type = 'heap'; + $result = ReadThreadedHeapProfile($prog, $fname, $header); + } elsif ($header =~ m/^--- *$contention_marker/o) { + $main::profile_type = 'contention'; + $result = ReadSynchProfile($prog, *PROFILE); + } elsif ($header =~ m/^--- *Stacks:/) { + print STDERR + "Old format contention profile: mistakenly reports " . + "condition variable signals as lock contentions.\n"; + $main::profile_type = 'contention'; + $result = ReadSynchProfile($prog, *PROFILE); + } elsif ($header =~ m/^--- *$profile_marker/) { + # the binary cpu profile data starts immediately after this line + $main::profile_type = 'cpu'; + $result = ReadCPUProfile($prog, $fname, *PROFILE); + } else { + if (defined($symbols)) { + # a symbolized profile contains a format we don't recognize, bail out + error("$fname: Cannot recognize profile section after symbols.\n"); + } + # no ascii header present -- must be a CPU profile + $main::profile_type = 'cpu'; + $result = ReadCPUProfile($prog, $fname, *PROFILE); + } + + close(PROFILE); + + # if we got symbols along with the profile, return those as well + if (defined($symbols)) { + $result->{symbols} = $symbols; + } + + return $result; +} + +# Subtract one from caller pc so we map back to call instr. +# However, don't do this if we're reading a symbolized profile +# file, in which case the subtract-one was done when the file +# was written. +# +# We apply the same logic to all readers, though ReadCPUProfile uses an +# independent implementation. +sub FixCallerAddresses { + my $stack = shift; + # --raw/http: Always subtract one from pc's, because PrintSymbolizedProfile() + # dumps unadjusted profiles. + { + $stack =~ /(\s)/; + my $delimiter = $1; + my @addrs = split(' ', $stack); + my @fixedaddrs; + $#fixedaddrs = $#addrs; + if ($#addrs >= 0) { + $fixedaddrs[0] = $addrs[0]; + } + for (my $i = 1; $i <= $#addrs; $i++) { + $fixedaddrs[$i] = AddressSub($addrs[$i], "0x1"); + } + return join $delimiter, @fixedaddrs; + } +} + +# CPU profile reader +sub ReadCPUProfile { + my $prog = shift; + my $fname = shift; # just used for logging + local *PROFILE = shift; + my $version; + my $period; + my $i; + my $profile = {}; + my $pcs = {}; + + # Parse string into array of slots. + my $slots = CpuProfileStream->new(*PROFILE, $fname); + + # Read header. The current header version is a 5-element structure + # containing: + # 0: header count (always 0) + # 1: header "words" (after this one: 3) + # 2: format version (0) + # 3: sampling period (usec) + # 4: unused padding (always 0) + if ($slots->get(0) != 0 ) { + error("$fname: not a profile file, or old format profile file\n"); + } + $i = 2 + $slots->get(1); + $version = $slots->get(2); + $period = $slots->get(3); + # Do some sanity checking on these header values. + if ($version > (2**32) || $period > (2**32) || $i > (2**32) || $i < 5) { + error("$fname: not a profile file, or corrupted profile file\n"); + } + + # Parse profile + while ($slots->get($i) != -1) { + my $n = $slots->get($i++); + my $d = $slots->get($i++); + if ($d > (2**16)) { # TODO(csilvers): what's a reasonable max-stack-depth? + my $addr = sprintf("0%o", $i * ($address_length == 8 ? 4 : 8)); + print STDERR "At index $i (address $addr):\n"; + error("$fname: stack trace depth >= 2**32\n"); + } + if ($slots->get($i) == 0) { + # End of profile data marker + $i += $d; + last; + } + + # Make key out of the stack entries + my @k = (); + for (my $j = 0; $j < $d; $j++) { + my $pc = $slots->get($i+$j); + # Subtract one from caller pc so we map back to call instr. + $pc--; + $pc = sprintf("%0*x", $address_length, $pc); + $pcs->{$pc} = 1; + push @k, $pc; + } + + AddEntry($profile, (join "\n", @k), $n); + $i += $d; + } + + # Parse map + my $map = ''; + seek(PROFILE, $i * 4, 0); + read(PROFILE, $map, (stat PROFILE)[7]); + + my $r = {}; + $r->{version} = $version; + $r->{period} = $period; + $r->{profile} = $profile; + $r->{libs} = ParseLibraries($prog, $map, $pcs); + $r->{pcs} = $pcs; + + return $r; +} + +sub HeapProfileIndex { + my $index = 1; + if ($main::opt_inuse_space) { + $index = 1; + } elsif ($main::opt_inuse_objects) { + $index = 0; + } elsif ($main::opt_alloc_space) { + $index = 3; + } elsif ($main::opt_alloc_objects) { + $index = 2; + } + return $index; +} + +sub ReadMappedLibraries { + my $fh = shift; + my $map = ""; + # Read the /proc/self/maps data + while (<$fh>) { + s/\r//g; # turn windows-looking lines into unix-looking lines + $map .= $_; + } + return $map; +} + +sub ReadMemoryMap { + my $fh = shift; + my $map = ""; + # Read /proc/self/maps data as formatted by DumpAddressMap() + my $buildvar = ""; + while (<PROFILE>) { + s/\r//g; # turn windows-looking lines into unix-looking lines + # Parse "build=<dir>" specification if supplied + if (m/^\s*build=(.*)\n/) { + $buildvar = $1; + } + + # Expand "$build" variable if available + $_ =~ s/\$build\b/$buildvar/g; + + $map .= $_; + } + return $map; +} + +sub AdjustSamples { + my ($sample_adjustment, $sampling_algorithm, $n1, $s1, $n2, $s2) = @_; + if ($sample_adjustment) { + if ($sampling_algorithm == 2) { + # Remote-heap version 2 + # The sampling frequency is the rate of a Poisson process. + # This means that the probability of sampling an allocation of + # size X with sampling rate Y is 1 - exp(-X/Y) + if ($n1 != 0) { + my $ratio = (($s1*1.0)/$n1)/($sample_adjustment); + my $scale_factor = 1/(1 - exp(-$ratio)); + $n1 *= $scale_factor; + $s1 *= $scale_factor; + } + if ($n2 != 0) { + my $ratio = (($s2*1.0)/$n2)/($sample_adjustment); + my $scale_factor = 1/(1 - exp(-$ratio)); + $n2 *= $scale_factor; + $s2 *= $scale_factor; + } + } else { + # Remote-heap version 1 + my $ratio; + $ratio = (($s1*1.0)/$n1)/($sample_adjustment); + if ($ratio < 1) { + $n1 /= $ratio; + $s1 /= $ratio; + } + $ratio = (($s2*1.0)/$n2)/($sample_adjustment); + if ($ratio < 1) { + $n2 /= $ratio; + $s2 /= $ratio; + } + } + } + return ($n1, $s1, $n2, $s2); +} + +sub ReadHeapProfile { + my $prog = shift; + local *PROFILE = shift; + my $header = shift; + + my $index = HeapProfileIndex(); + + # Find the type of this profile. The header line looks like: + # heap profile: 1246: 8800744 [ 1246: 8800744] @ <heap-url>/266053 + # There are two pairs <count: size>, the first inuse objects/space, and the + # second allocated objects/space. This is followed optionally by a profile + # type, and if that is present, optionally by a sampling frequency. + # For remote heap profiles (v1): + # The interpretation of the sampling frequency is that the profiler, for + # each sample, calculates a uniformly distributed random integer less than + # the given value, and records the next sample after that many bytes have + # been allocated. Therefore, the expected sample interval is half of the + # given frequency. By default, if not specified, the expected sample + # interval is 128KB. Only remote-heap-page profiles are adjusted for + # sample size. + # For remote heap profiles (v2): + # The sampling frequency is the rate of a Poisson process. This means that + # the probability of sampling an allocation of size X with sampling rate Y + # is 1 - exp(-X/Y) + # For version 2, a typical header line might look like this: + # heap profile: 1922: 127792360 [ 1922: 127792360] @ <heap-url>_v2/524288 + # the trailing number (524288) is the sampling rate. (Version 1 showed + # double the 'rate' here) + my $sampling_algorithm = 0; + my $sample_adjustment = 0; + chomp($header); + my $type = "unknown"; + if ($header =~ m"^heap profile:\s*(\d+):\s+(\d+)\s+\[\s*(\d+):\s+(\d+)\](\s*@\s*([^/]*)(/(\d+))?)?") { + if (defined($6) && ($6 ne '')) { + $type = $6; + my $sample_period = $8; + # $type is "heapprofile" for profiles generated by the + # heap-profiler, and either "heap" or "heap_v2" for profiles + # generated by sampling directly within tcmalloc. It can also + # be "growth" for heap-growth profiles. The first is typically + # found for profiles generated locally, and the others for + # remote profiles. + if (($type eq "heapprofile") || ($type !~ /heap/) ) { + # No need to adjust for the sampling rate with heap-profiler-derived data + $sampling_algorithm = 0; + } elsif ($type =~ /_v2/) { + $sampling_algorithm = 2; # version 2 sampling + if (defined($sample_period) && ($sample_period ne '')) { + $sample_adjustment = int($sample_period); + } + } else { + $sampling_algorithm = 1; # version 1 sampling + if (defined($sample_period) && ($sample_period ne '')) { + $sample_adjustment = int($sample_period)/2; + } + } + } else { + # We detect whether or not this is a remote-heap profile by checking + # that the total-allocated stats ($n2,$s2) are exactly the + # same as the in-use stats ($n1,$s1). It is remotely conceivable + # that a non-remote-heap profile may pass this check, but it is hard + # to imagine how that could happen. + # In this case it's so old it's guaranteed to be remote-heap version 1. + my ($n1, $s1, $n2, $s2) = ($1, $2, $3, $4); + if (($n1 == $n2) && ($s1 == $s2)) { + # This is likely to be a remote-heap based sample profile + $sampling_algorithm = 1; + } + } + } + + if ($sampling_algorithm > 0) { + # For remote-heap generated profiles, adjust the counts and sizes to + # account for the sample rate (we sample once every 128KB by default). + if ($sample_adjustment == 0) { + # Turn on profile adjustment. + $sample_adjustment = 128*1024; + print STDERR "Adjusting heap profiles for 1-in-128KB sampling rate\n"; + } else { + printf STDERR ("Adjusting heap profiles for 1-in-%d sampling rate\n", + $sample_adjustment); + } + if ($sampling_algorithm > 1) { + # We don't bother printing anything for the original version (version 1) + printf STDERR "Heap version $sampling_algorithm\n"; + } + } + + my $profile = {}; + my $pcs = {}; + my $map = ""; + + while (<PROFILE>) { + s/\r//g; # turn windows-looking lines into unix-looking lines + if (/^MAPPED_LIBRARIES:/) { + $map .= ReadMappedLibraries(*PROFILE); + last; + } + + if (/^--- Memory map:/) { + $map .= ReadMemoryMap(*PROFILE); + last; + } + + # Read entry of the form: + # <count1>: <bytes1> [<count2>: <bytes2>] @ a1 a2 a3 ... an + s/^\s*//; + s/\s*$//; + if (m/^\s*(\d+):\s+(\d+)\s+\[\s*(\d+):\s+(\d+)\]\s+@\s+(.*)$/) { + my $stack = $5; + my ($n1, $s1, $n2, $s2) = ($1, $2, $3, $4); + my @counts = AdjustSamples($sample_adjustment, $sampling_algorithm, + $n1, $s1, $n2, $s2); + AddEntries($profile, $pcs, FixCallerAddresses($stack), $counts[$index]); + } + } + + my $r = {}; + $r->{version} = "heap"; + $r->{period} = 1; + $r->{profile} = $profile; + $r->{libs} = ParseLibraries($prog, $map, $pcs); + $r->{pcs} = $pcs; + return $r; +} + +sub ReadThreadedHeapProfile { + my ($prog, $fname, $header) = @_; + + my $index = HeapProfileIndex(); + my $sampling_algorithm = 0; + my $sample_adjustment = 0; + chomp($header); + my $type = "unknown"; + # Assuming a very specific type of header for now. + if ($header =~ m"^heap_v2/(\d+)") { + $type = "_v2"; + $sampling_algorithm = 2; + $sample_adjustment = int($1); + } + if ($type ne "_v2" || !defined($sample_adjustment)) { + die "Threaded heap profiles require v2 sampling with a sample rate\n"; + } + + my $profile = {}; + my $thread_profiles = {}; + my $pcs = {}; + my $map = ""; + my $stack = ""; + + while (<PROFILE>) { + s/\r//g; + if (/^MAPPED_LIBRARIES:/) { + $map .= ReadMappedLibraries(*PROFILE); + last; + } + + if (/^--- Memory map:/) { + $map .= ReadMemoryMap(*PROFILE); + last; + } + + # Read entry of the form: + # @ a1 a2 ... an + # t*: <count1>: <bytes1> [<count2>: <bytes2>] + # t1: <count1>: <bytes1> [<count2>: <bytes2>] + # ... + # tn: <count1>: <bytes1> [<count2>: <bytes2>] + s/^\s*//; + s/\s*$//; + if (m/^@\s+(.*)$/) { + $stack = $1; + } elsif (m/^\s*(t(\*|\d+)):\s+(\d+):\s+(\d+)\s+\[\s*(\d+):\s+(\d+)\]$/) { + if ($stack eq "") { + # Still in the header, so this is just a per-thread summary. + next; + } + my $thread = $2; + my ($n1, $s1, $n2, $s2) = ($3, $4, $5, $6); + my @counts = AdjustSamples($sample_adjustment, $sampling_algorithm, + $n1, $s1, $n2, $s2); + if ($thread eq "*") { + AddEntries($profile, $pcs, FixCallerAddresses($stack), $counts[$index]); + } else { + if (!exists($thread_profiles->{$thread})) { + $thread_profiles->{$thread} = {}; + } + AddEntries($thread_profiles->{$thread}, $pcs, + FixCallerAddresses($stack), $counts[$index]); + } + } + } + + my $r = {}; + $r->{version} = "heap"; + $r->{period} = 1; + $r->{profile} = $profile; + $r->{threads} = $thread_profiles; + $r->{libs} = ParseLibraries($prog, $map, $pcs); + $r->{pcs} = $pcs; + return $r; +} + +sub ReadSynchProfile { + my $prog = shift; + local *PROFILE = shift; + my $header = shift; + + my $map = ''; + my $profile = {}; + my $pcs = {}; + my $sampling_period = 1; + my $cyclespernanosec = 2.8; # Default assumption for old binaries + my $seen_clockrate = 0; + my $line; + + my $index = 0; + if ($main::opt_total_delay) { + $index = 0; + } elsif ($main::opt_contentions) { + $index = 1; + } elsif ($main::opt_mean_delay) { + $index = 2; + } + + while ( $line = <PROFILE> ) { + $line =~ s/\r//g; # turn windows-looking lines into unix-looking lines + if ( $line =~ /^\s*(\d+)\s+(\d+) \@\s*(.*?)\s*$/ ) { + my ($cycles, $count, $stack) = ($1, $2, $3); + + # Convert cycles to nanoseconds + $cycles /= $cyclespernanosec; + + # Adjust for sampling done by application + $cycles *= $sampling_period; + $count *= $sampling_period; + + my @values = ($cycles, $count, $cycles / $count); + AddEntries($profile, $pcs, FixCallerAddresses($stack), $values[$index]); + + } elsif ( $line =~ /^(slow release).*thread \d+ \@\s*(.*?)\s*$/ || + $line =~ /^\s*(\d+) \@\s*(.*?)\s*$/ ) { + my ($cycles, $stack) = ($1, $2); + if ($cycles !~ /^\d+$/) { + next; + } + + # Convert cycles to nanoseconds + $cycles /= $cyclespernanosec; + + # Adjust for sampling done by application + $cycles *= $sampling_period; + + AddEntries($profile, $pcs, FixCallerAddresses($stack), $cycles); + + } elsif ( $line =~ m/^([a-z][^=]*)=(.*)$/ ) { + my ($variable, $value) = ($1,$2); + for ($variable, $value) { + s/^\s+//; + s/\s+$//; + } + if ($variable eq "cycles/second") { + $cyclespernanosec = $value / 1e9; + $seen_clockrate = 1; + } elsif ($variable eq "sampling period") { + $sampling_period = $value; + } elsif ($variable eq "ms since reset") { + # Currently nothing is done with this value in jeprof + # So we just silently ignore it for now + } elsif ($variable eq "discarded samples") { + # Currently nothing is done with this value in jeprof + # So we just silently ignore it for now + } else { + printf STDERR ("Ignoring unnknown variable in /contention output: " . + "'%s' = '%s'\n",$variable,$value); + } + } else { + # Memory map entry + $map .= $line; + } + } + + if (!$seen_clockrate) { + printf STDERR ("No cycles/second entry in profile; Guessing %.1f GHz\n", + $cyclespernanosec); + } + + my $r = {}; + $r->{version} = 0; + $r->{period} = $sampling_period; + $r->{profile} = $profile; + $r->{libs} = ParseLibraries($prog, $map, $pcs); + $r->{pcs} = $pcs; + return $r; +} + +# Given a hex value in the form "0x1abcd" or "1abcd", return either +# "0001abcd" or "000000000001abcd", depending on the current (global) +# address length. +sub HexExtend { + my $addr = shift; + + $addr =~ s/^(0x)?0*//; + my $zeros_needed = $address_length - length($addr); + if ($zeros_needed < 0) { + printf STDERR "Warning: address $addr is longer than address length $address_length\n"; + return $addr; + } + return ("0" x $zeros_needed) . $addr; +} + +##### Symbol extraction ##### + +# Aggressively search the lib_prefix values for the given library +# If all else fails, just return the name of the library unmodified. +# If the lib_prefix is "/my/path,/other/path" and $file is "/lib/dir/mylib.so" +# it will search the following locations in this order, until it finds a file: +# /my/path/lib/dir/mylib.so +# /other/path/lib/dir/mylib.so +# /my/path/dir/mylib.so +# /other/path/dir/mylib.so +# /my/path/mylib.so +# /other/path/mylib.so +# /lib/dir/mylib.so (returned as last resort) +sub FindLibrary { + my $file = shift; + my $suffix = $file; + + # Search for the library as described above + do { + foreach my $prefix (@prefix_list) { + my $fullpath = $prefix . $suffix; + if (-e $fullpath) { + return $fullpath; + } + } + } while ($suffix =~ s|^/[^/]+/|/|); + return $file; +} + +# Return path to library with debugging symbols. +# For libc libraries, the copy in /usr/lib/debug contains debugging symbols +sub DebuggingLibrary { + my $file = shift; + if ($file =~ m|^/|) { + if (-f "/usr/lib/debug$file") { + return "/usr/lib/debug$file"; + } elsif (-f "/usr/lib/debug$file.debug") { + return "/usr/lib/debug$file.debug"; + } + } + return undef; +} + +# Parse text section header of a library using objdump +sub ParseTextSectionHeaderFromObjdump { + my $lib = shift; + + my $size = undef; + my $vma; + my $file_offset; + # Get objdump output from the library file to figure out how to + # map between mapped addresses and addresses in the library. + my $cmd = ShellEscape($obj_tool_map{"objdump"}, "-h", $lib); + open(OBJDUMP, "$cmd |") || error("$cmd: $!\n"); + while (<OBJDUMP>) { + s/\r//g; # turn windows-looking lines into unix-looking lines + # Idx Name Size VMA LMA File off Algn + # 10 .text 00104b2c 420156f0 420156f0 000156f0 2**4 + # For 64-bit objects, VMA and LMA will be 16 hex digits, size and file + # offset may still be 8. But AddressSub below will still handle that. + my @x = split; + if (($#x >= 6) && ($x[1] eq '.text')) { + $size = $x[2]; + $vma = $x[3]; + $file_offset = $x[5]; + last; + } + } + close(OBJDUMP); + + if (!defined($size)) { + return undef; + } + + my $r = {}; + $r->{size} = $size; + $r->{vma} = $vma; + $r->{file_offset} = $file_offset; + + return $r; +} + +# Parse text section header of a library using otool (on OS X) +sub ParseTextSectionHeaderFromOtool { + my $lib = shift; + + my $size = undef; + my $vma = undef; + my $file_offset = undef; + # Get otool output from the library file to figure out how to + # map between mapped addresses and addresses in the library. + my $command = ShellEscape($obj_tool_map{"otool"}, "-l", $lib); + open(OTOOL, "$command |") || error("$command: $!\n"); + my $cmd = ""; + my $sectname = ""; + my $segname = ""; + foreach my $line (<OTOOL>) { + $line =~ s/\r//g; # turn windows-looking lines into unix-looking lines + # Load command <#> + # cmd LC_SEGMENT + # [...] + # Section + # sectname __text + # segname __TEXT + # addr 0x000009f8 + # size 0x00018b9e + # offset 2552 + # align 2^2 (4) + # We will need to strip off the leading 0x from the hex addresses, + # and convert the offset into hex. + if ($line =~ /Load command/) { + $cmd = ""; + $sectname = ""; + $segname = ""; + } elsif ($line =~ /Section/) { + $sectname = ""; + $segname = ""; + } elsif ($line =~ /cmd (\w+)/) { + $cmd = $1; + } elsif ($line =~ /sectname (\w+)/) { + $sectname = $1; + } elsif ($line =~ /segname (\w+)/) { + $segname = $1; + } elsif (!(($cmd eq "LC_SEGMENT" || $cmd eq "LC_SEGMENT_64") && + $sectname eq "__text" && + $segname eq "__TEXT")) { + next; + } elsif ($line =~ /\baddr 0x([0-9a-fA-F]+)/) { + $vma = $1; + } elsif ($line =~ /\bsize 0x([0-9a-fA-F]+)/) { + $size = $1; + } elsif ($line =~ /\boffset ([0-9]+)/) { + $file_offset = sprintf("%016x", $1); + } + if (defined($vma) && defined($size) && defined($file_offset)) { + last; + } + } + close(OTOOL); + + if (!defined($vma) || !defined($size) || !defined($file_offset)) { + return undef; + } + + my $r = {}; + $r->{size} = $size; + $r->{vma} = $vma; + $r->{file_offset} = $file_offset; + + return $r; +} + +sub ParseTextSectionHeader { + # obj_tool_map("otool") is only defined if we're in a Mach-O environment + if (defined($obj_tool_map{"otool"})) { + my $r = ParseTextSectionHeaderFromOtool(@_); + if (defined($r)){ + return $r; + } + } + # If otool doesn't work, or we don't have it, fall back to objdump + return ParseTextSectionHeaderFromObjdump(@_); +} + +# Split /proc/pid/maps dump into a list of libraries +sub ParseLibraries { + return if $main::use_symbol_page; # We don't need libraries info. + my $prog = shift; + my $map = shift; + my $pcs = shift; + + my $result = []; + my $h = "[a-f0-9]+"; + my $zero_offset = HexExtend("0"); + + my $buildvar = ""; + foreach my $l (split("\n", $map)) { + if ($l =~ m/^\s*build=(.*)$/) { + $buildvar = $1; + } + + my $start; + my $finish; + my $offset; + my $lib; + if ($l =~ /^($h)-($h)\s+..x.\s+($h)\s+\S+:\S+\s+\d+\s+(\S+\.(so|dll|dylib|bundle)((\.\d+)+\w*(\.\d+){0,3})?)$/i) { + # Full line from /proc/self/maps. Example: + # 40000000-40015000 r-xp 00000000 03:01 12845071 /lib/ld-2.3.2.so + $start = HexExtend($1); + $finish = HexExtend($2); + $offset = HexExtend($3); + $lib = $4; + $lib =~ s|\\|/|g; # turn windows-style paths into unix-style paths + } elsif ($l =~ /^\s*($h)-($h):\s*(\S+\.so(\.\d+)*)/) { + # Cooked line from DumpAddressMap. Example: + # 40000000-40015000: /lib/ld-2.3.2.so + $start = HexExtend($1); + $finish = HexExtend($2); + $offset = $zero_offset; + $lib = $3; + } + # FreeBSD 10.0 virtual memory map /proc/curproc/map as defined in + # function procfs_doprocmap (sys/fs/procfs/procfs_map.c) + # + # Example: + # 0x800600000 0x80061a000 26 0 0xfffff800035a0000 r-x 75 33 0x1004 COW NC vnode /libexec/ld-elf.s + # o.1 NCH -1 + elsif ($l =~ /^(0x$h)\s(0x$h)\s\d+\s\d+\s0x$h\sr-x\s\d+\s\d+\s0x\d+\s(COW|NCO)\s(NC|NNC)\svnode\s(\S+\.so(\.\d+)*)/) { + $start = HexExtend($1); + $finish = HexExtend($2); + $offset = $zero_offset; + $lib = FindLibrary($5); + + } else { + next; + } + + # Expand "$build" variable if available + $lib =~ s/\$build\b/$buildvar/g; + + $lib = FindLibrary($lib); + + # Check for pre-relocated libraries, which use pre-relocated symbol tables + # and thus require adjusting the offset that we'll use to translate + # VM addresses into symbol table addresses. + # Only do this if we're not going to fetch the symbol table from a + # debugging copy of the library. + if (!DebuggingLibrary($lib)) { + my $text = ParseTextSectionHeader($lib); + if (defined($text)) { + my $vma_offset = AddressSub($text->{vma}, $text->{file_offset}); + $offset = AddressAdd($offset, $vma_offset); + } + } + + if($main::opt_debug) { printf STDERR "$start:$finish ($offset) $lib\n"; } + push(@{$result}, [$lib, $start, $finish, $offset]); + } + + # Append special entry for additional library (not relocated) + if ($main::opt_lib ne "") { + my $text = ParseTextSectionHeader($main::opt_lib); + if (defined($text)) { + my $start = $text->{vma}; + my $finish = AddressAdd($start, $text->{size}); + + push(@{$result}, [$main::opt_lib, $start, $finish, $start]); + } + } + + # Append special entry for the main program. This covers + # 0..max_pc_value_seen, so that we assume pc values not found in one + # of the library ranges will be treated as coming from the main + # program binary. + my $min_pc = HexExtend("0"); + my $max_pc = $min_pc; # find the maximal PC value in any sample + foreach my $pc (keys(%{$pcs})) { + if (HexExtend($pc) gt $max_pc) { $max_pc = HexExtend($pc); } + } + push(@{$result}, [$prog, $min_pc, $max_pc, $zero_offset]); + + return $result; +} + +# Add two hex addresses of length $address_length. +# Run jeprof --test for unit test if this is changed. +sub AddressAdd { + my $addr1 = shift; + my $addr2 = shift; + my $sum; + + if ($address_length == 8) { + # Perl doesn't cope with wraparound arithmetic, so do it explicitly: + $sum = (hex($addr1)+hex($addr2)) % (0x10000000 * 16); + return sprintf("%08x", $sum); + + } else { + # Do the addition in 7-nibble chunks to trivialize carry handling. + + if ($main::opt_debug and $main::opt_test) { + print STDERR "AddressAdd $addr1 + $addr2 = "; + } + + my $a1 = substr($addr1,-7); + $addr1 = substr($addr1,0,-7); + my $a2 = substr($addr2,-7); + $addr2 = substr($addr2,0,-7); + $sum = hex($a1) + hex($a2); + my $c = 0; + if ($sum > 0xfffffff) { + $c = 1; + $sum -= 0x10000000; + } + my $r = sprintf("%07x", $sum); + + $a1 = substr($addr1,-7); + $addr1 = substr($addr1,0,-7); + $a2 = substr($addr2,-7); + $addr2 = substr($addr2,0,-7); + $sum = hex($a1) + hex($a2) + $c; + $c = 0; + if ($sum > 0xfffffff) { + $c = 1; + $sum -= 0x10000000; + } + $r = sprintf("%07x", $sum) . $r; + + $sum = hex($addr1) + hex($addr2) + $c; + if ($sum > 0xff) { $sum -= 0x100; } + $r = sprintf("%02x", $sum) . $r; + + if ($main::opt_debug and $main::opt_test) { print STDERR "$r\n"; } + + return $r; + } +} + + +# Subtract two hex addresses of length $address_length. +# Run jeprof --test for unit test if this is changed. +sub AddressSub { + my $addr1 = shift; + my $addr2 = shift; + my $diff; + + if ($address_length == 8) { + # Perl doesn't cope with wraparound arithmetic, so do it explicitly: + $diff = (hex($addr1)-hex($addr2)) % (0x10000000 * 16); + return sprintf("%08x", $diff); + + } else { + # Do the addition in 7-nibble chunks to trivialize borrow handling. + # if ($main::opt_debug) { print STDERR "AddressSub $addr1 - $addr2 = "; } + + my $a1 = hex(substr($addr1,-7)); + $addr1 = substr($addr1,0,-7); + my $a2 = hex(substr($addr2,-7)); + $addr2 = substr($addr2,0,-7); + my $b = 0; + if ($a2 > $a1) { + $b = 1; + $a1 += 0x10000000; + } + $diff = $a1 - $a2; + my $r = sprintf("%07x", $diff); + + $a1 = hex(substr($addr1,-7)); + $addr1 = substr($addr1,0,-7); + $a2 = hex(substr($addr2,-7)) + $b; + $addr2 = substr($addr2,0,-7); + $b = 0; + if ($a2 > $a1) { + $b = 1; + $a1 += 0x10000000; + } + $diff = $a1 - $a2; + $r = sprintf("%07x", $diff) . $r; + + $a1 = hex($addr1); + $a2 = hex($addr2) + $b; + if ($a2 > $a1) { $a1 += 0x100; } + $diff = $a1 - $a2; + $r = sprintf("%02x", $diff) . $r; + + # if ($main::opt_debug) { print STDERR "$r\n"; } + + return $r; + } +} + +# Increment a hex addresses of length $address_length. +# Run jeprof --test for unit test if this is changed. +sub AddressInc { + my $addr = shift; + my $sum; + + if ($address_length == 8) { + # Perl doesn't cope with wraparound arithmetic, so do it explicitly: + $sum = (hex($addr)+1) % (0x10000000 * 16); + return sprintf("%08x", $sum); + + } else { + # Do the addition in 7-nibble chunks to trivialize carry handling. + # We are always doing this to step through the addresses in a function, + # and will almost never overflow the first chunk, so we check for this + # case and exit early. + + # if ($main::opt_debug) { print STDERR "AddressInc $addr1 = "; } + + my $a1 = substr($addr,-7); + $addr = substr($addr,0,-7); + $sum = hex($a1) + 1; + my $r = sprintf("%07x", $sum); + if ($sum <= 0xfffffff) { + $r = $addr . $r; + # if ($main::opt_debug) { print STDERR "$r\n"; } + return HexExtend($r); + } else { + $r = "0000000"; + } + + $a1 = substr($addr,-7); + $addr = substr($addr,0,-7); + $sum = hex($a1) + 1; + $r = sprintf("%07x", $sum) . $r; + if ($sum <= 0xfffffff) { + $r = $addr . $r; + # if ($main::opt_debug) { print STDERR "$r\n"; } + return HexExtend($r); + } else { + $r = "00000000000000"; + } + + $sum = hex($addr) + 1; + if ($sum > 0xff) { $sum -= 0x100; } + $r = sprintf("%02x", $sum) . $r; + + # if ($main::opt_debug) { print STDERR "$r\n"; } + return $r; + } +} + +# Extract symbols for all PC values found in profile +sub ExtractSymbols { + my $libs = shift; + my $pcset = shift; + + my $symbols = {}; + + # Map each PC value to the containing library. To make this faster, + # we sort libraries by their starting pc value (highest first), and + # advance through the libraries as we advance the pc. Sometimes the + # addresses of libraries may overlap with the addresses of the main + # binary, so to make sure the libraries 'win', we iterate over the + # libraries in reverse order (which assumes the binary doesn't start + # in the middle of a library, which seems a fair assumption). + my @pcs = (sort { $a cmp $b } keys(%{$pcset})); # pcset is 0-extended strings + foreach my $lib (sort {$b->[1] cmp $a->[1]} @{$libs}) { + my $libname = $lib->[0]; + my $start = $lib->[1]; + my $finish = $lib->[2]; + my $offset = $lib->[3]; + + # Use debug library if it exists + my $debug_libname = DebuggingLibrary($libname); + if ($debug_libname) { + $libname = $debug_libname; + } + + # Get list of pcs that belong in this library. + my $contained = []; + my ($start_pc_index, $finish_pc_index); + # Find smallest finish_pc_index such that $finish < $pc[$finish_pc_index]. + for ($finish_pc_index = $#pcs + 1; $finish_pc_index > 0; + $finish_pc_index--) { + last if $pcs[$finish_pc_index - 1] le $finish; + } + # Find smallest start_pc_index such that $start <= $pc[$start_pc_index]. + for ($start_pc_index = $finish_pc_index; $start_pc_index > 0; + $start_pc_index--) { + last if $pcs[$start_pc_index - 1] lt $start; + } + # This keeps PC values higher than $pc[$finish_pc_index] in @pcs, + # in case there are overlaps in libraries and the main binary. + @{$contained} = splice(@pcs, $start_pc_index, + $finish_pc_index - $start_pc_index); + # Map to symbols + MapToSymbols($libname, AddressSub($start, $offset), $contained, $symbols); + } + + return $symbols; +} + +# Map list of PC values to symbols for a given image +sub MapToSymbols { + my $image = shift; + my $offset = shift; + my $pclist = shift; + my $symbols = shift; + + my $debug = 0; + + # Ignore empty binaries + if ($#{$pclist} < 0) { return; } + + # Figure out the addr2line command to use + my $addr2line = $obj_tool_map{"addr2line"}; + my $cmd = ShellEscape($addr2line, "-f", "-C", "-e", $image); + if (exists $obj_tool_map{"addr2line_pdb"}) { + $addr2line = $obj_tool_map{"addr2line_pdb"}; + $cmd = ShellEscape($addr2line, "--demangle", "-f", "-C", "-e", $image); + } + + # If "addr2line" isn't installed on the system at all, just use + # nm to get what info we can (function names, but not line numbers). + if (system(ShellEscape($addr2line, "--help") . " >$dev_null 2>&1") != 0) { + MapSymbolsWithNM($image, $offset, $pclist, $symbols); + return; + } + + # "addr2line -i" can produce a variable number of lines per input + # address, with no separator that allows us to tell when data for + # the next address starts. So we find the address for a special + # symbol (_fini) and interleave this address between all real + # addresses passed to addr2line. The name of this special symbol + # can then be used as a separator. + $sep_address = undef; # May be filled in by MapSymbolsWithNM() + my $nm_symbols = {}; + MapSymbolsWithNM($image, $offset, $pclist, $nm_symbols); + if (defined($sep_address)) { + # Only add " -i" to addr2line if the binary supports it. + # addr2line --help returns 0, but not if it sees an unknown flag first. + if (system("$cmd -i --help >$dev_null 2>&1") == 0) { + $cmd .= " -i"; + } else { + $sep_address = undef; # no need for sep_address if we don't support -i + } + } + + # Make file with all PC values with intervening 'sep_address' so + # that we can reliably detect the end of inlined function list + open(ADDRESSES, ">$main::tmpfile_sym") || error("$main::tmpfile_sym: $!\n"); + if ($debug) { print("---- $image ---\n"); } + for (my $i = 0; $i <= $#{$pclist}; $i++) { + # addr2line always reads hex addresses, and does not need '0x' prefix. + if ($debug) { printf STDERR ("%s\n", $pclist->[$i]); } + printf ADDRESSES ("%s\n", AddressSub($pclist->[$i], $offset)); + if (defined($sep_address)) { + printf ADDRESSES ("%s\n", $sep_address); + } + } + close(ADDRESSES); + if ($debug) { + print("----\n"); + system("cat", $main::tmpfile_sym); + print("----\n"); + system("$cmd < " . ShellEscape($main::tmpfile_sym)); + print("----\n"); + } + + open(SYMBOLS, "$cmd <" . ShellEscape($main::tmpfile_sym) . " |") + || error("$cmd: $!\n"); + my $count = 0; # Index in pclist + while (<SYMBOLS>) { + # Read fullfunction and filelineinfo from next pair of lines + s/\r?\n$//g; + my $fullfunction = $_; + $_ = <SYMBOLS>; + s/\r?\n$//g; + my $filelinenum = $_; + + if (defined($sep_address) && $fullfunction eq $sep_symbol) { + # Terminating marker for data for this address + $count++; + next; + } + + $filelinenum =~ s|\\|/|g; # turn windows-style paths into unix-style paths + + my $pcstr = $pclist->[$count]; + my $function = ShortFunctionName($fullfunction); + my $nms = $nm_symbols->{$pcstr}; + if (defined($nms)) { + if ($fullfunction eq '??') { + # nm found a symbol for us. + $function = $nms->[0]; + $fullfunction = $nms->[2]; + } else { + # MapSymbolsWithNM tags each routine with its starting address, + # useful in case the image has multiple occurrences of this + # routine. (It uses a syntax that resembles template paramters, + # that are automatically stripped out by ShortFunctionName().) + # addr2line does not provide the same information. So we check + # if nm disambiguated our symbol, and if so take the annotated + # (nm) version of the routine-name. TODO(csilvers): this won't + # catch overloaded, inlined symbols, which nm doesn't see. + # Better would be to do a check similar to nm's, in this fn. + if ($nms->[2] =~ m/^\Q$function\E/) { # sanity check it's the right fn + $function = $nms->[0]; + $fullfunction = $nms->[2]; + } + } + } + + # Prepend to accumulated symbols for pcstr + # (so that caller comes before callee) + my $sym = $symbols->{$pcstr}; + if (!defined($sym)) { + $sym = []; + $symbols->{$pcstr} = $sym; + } + unshift(@{$sym}, $function, $filelinenum, $fullfunction); + if ($debug) { printf STDERR ("%s => [%s]\n", $pcstr, join(" ", @{$sym})); } + if (!defined($sep_address)) { + # Inlining is off, so this entry ends immediately + $count++; + } + } + close(SYMBOLS); +} + +# Use nm to map the list of referenced PCs to symbols. Return true iff we +# are able to read procedure information via nm. +sub MapSymbolsWithNM { + my $image = shift; + my $offset = shift; + my $pclist = shift; + my $symbols = shift; + + # Get nm output sorted by increasing address + my $symbol_table = GetProcedureBoundaries($image, "."); + if (!%{$symbol_table}) { + return 0; + } + # Start addresses are already the right length (8 or 16 hex digits). + my @names = sort { $symbol_table->{$a}->[0] cmp $symbol_table->{$b}->[0] } + keys(%{$symbol_table}); + + if ($#names < 0) { + # No symbols: just use addresses + foreach my $pc (@{$pclist}) { + my $pcstr = "0x" . $pc; + $symbols->{$pc} = [$pcstr, "?", $pcstr]; + } + return 0; + } + + # Sort addresses so we can do a join against nm output + my $index = 0; + my $fullname = $names[0]; + my $name = ShortFunctionName($fullname); + foreach my $pc (sort { $a cmp $b } @{$pclist}) { + # Adjust for mapped offset + my $mpc = AddressSub($pc, $offset); + while (($index < $#names) && ($mpc ge $symbol_table->{$fullname}->[1])){ + $index++; + $fullname = $names[$index]; + $name = ShortFunctionName($fullname); + } + if ($mpc lt $symbol_table->{$fullname}->[1]) { + $symbols->{$pc} = [$name, "?", $fullname]; + } else { + my $pcstr = "0x" . $pc; + $symbols->{$pc} = [$pcstr, "?", $pcstr]; + } + } + return 1; +} + +sub ShortFunctionName { + my $function = shift; + while ($function =~ s/\([^()]*\)(\s*const)?//g) { } # Argument types + while ($function =~ s/<[^<>]*>//g) { } # Remove template arguments + $function =~ s/^.*\s+(\w+::)/$1/; # Remove leading type + return $function; +} + +# Trim overly long symbols found in disassembler output +sub CleanDisassembly { + my $d = shift; + while ($d =~ s/\([^()%]*\)(\s*const)?//g) { } # Argument types, not (%rax) + while ($d =~ s/(\w+)<[^<>]*>/$1/g) { } # Remove template arguments + return $d; +} + +# Clean file name for display +sub CleanFileName { + my ($f) = @_; + $f =~ s|^/proc/self/cwd/||; + $f =~ s|^\./||; + return $f; +} + +# Make address relative to section and clean up for display +sub UnparseAddress { + my ($offset, $address) = @_; + $address = AddressSub($address, $offset); + $address =~ s/^0x//; + $address =~ s/^0*//; + return $address; +} + +##### Miscellaneous ##### + +# Find the right versions of the above object tools to use. The +# argument is the program file being analyzed, and should be an ELF +# 32-bit or ELF 64-bit executable file. The location of the tools +# is determined by considering the following options in this order: +# 1) --tools option, if set +# 2) JEPROF_TOOLS environment variable, if set +# 3) the environment +sub ConfigureObjTools { + my $prog_file = shift; + + # Check for the existence of $prog_file because /usr/bin/file does not + # predictably return error status in prod. + (-e $prog_file) || error("$prog_file does not exist.\n"); + + my $file_type = undef; + if (-e "/usr/bin/file") { + # Follow symlinks (at least for systems where "file" supports that). + my $escaped_prog_file = ShellEscape($prog_file); + $file_type = `/usr/bin/file -L $escaped_prog_file 2>$dev_null || + /usr/bin/file $escaped_prog_file`; + } elsif ($^O == "MSWin32") { + $file_type = "MS Windows"; + } else { + print STDERR "WARNING: Can't determine the file type of $prog_file"; + } + + if ($file_type =~ /64-bit/) { + # Change $address_length to 16 if the program file is ELF 64-bit. + # We can't detect this from many (most?) heap or lock contention + # profiles, since the actual addresses referenced are generally in low + # memory even for 64-bit programs. + $address_length = 16; + } + + if ($file_type =~ /MS Windows/) { + # For windows, we provide a version of nm and addr2line as part of + # the opensource release, which is capable of parsing + # Windows-style PDB executables. It should live in the path, or + # in the same directory as jeprof. + $obj_tool_map{"nm_pdb"} = "nm-pdb"; + $obj_tool_map{"addr2line_pdb"} = "addr2line-pdb"; + } + + if ($file_type =~ /Mach-O/) { + # OS X uses otool to examine Mach-O files, rather than objdump. + $obj_tool_map{"otool"} = "otool"; + $obj_tool_map{"addr2line"} = "false"; # no addr2line + $obj_tool_map{"objdump"} = "false"; # no objdump + } + + # Go fill in %obj_tool_map with the pathnames to use: + foreach my $tool (keys %obj_tool_map) { + $obj_tool_map{$tool} = ConfigureTool($obj_tool_map{$tool}); + } +} + +# Returns the path of a caller-specified object tool. If --tools or +# JEPROF_TOOLS are specified, then returns the full path to the tool +# with that prefix. Otherwise, returns the path unmodified (which +# means we will look for it on PATH). +sub ConfigureTool { + my $tool = shift; + my $path; + + # --tools (or $JEPROF_TOOLS) is a comma separated list, where each + # item is either a) a pathname prefix, or b) a map of the form + # <tool>:<path>. First we look for an entry of type (b) for our + # tool. If one is found, we use it. Otherwise, we consider all the + # pathname prefixes in turn, until one yields an existing file. If + # none does, we use a default path. + my $tools = $main::opt_tools || $ENV{"JEPROF_TOOLS"} || ""; + if ($tools =~ m/(,|^)\Q$tool\E:([^,]*)/) { + $path = $2; + # TODO(csilvers): sanity-check that $path exists? Hard if it's relative. + } elsif ($tools ne '') { + foreach my $prefix (split(',', $tools)) { + next if ($prefix =~ /:/); # ignore "tool:fullpath" entries in the list + if (-x $prefix . $tool) { + $path = $prefix . $tool; + last; + } + } + if (!$path) { + error("No '$tool' found with prefix specified by " . + "--tools (or \$JEPROF_TOOLS) '$tools'\n"); + } + } else { + # ... otherwise use the version that exists in the same directory as + # jeprof. If there's nothing there, use $PATH. + $0 =~ m,[^/]*$,; # this is everything after the last slash + my $dirname = $`; # this is everything up to and including the last slash + if (-x "$dirname$tool") { + $path = "$dirname$tool"; + } else { + $path = $tool; + } + } + if ($main::opt_debug) { print STDERR "Using '$path' for '$tool'.\n"; } + return $path; +} + +sub ShellEscape { + my @escaped_words = (); + foreach my $word (@_) { + my $escaped_word = $word; + if ($word =~ m![^a-zA-Z0-9/.,_=-]!) { # check for anything not in whitelist + $escaped_word =~ s/'/'\\''/; + $escaped_word = "'$escaped_word'"; + } + push(@escaped_words, $escaped_word); + } + return join(" ", @escaped_words); +} + +sub cleanup { + unlink($main::tmpfile_sym); + unlink(keys %main::tempnames); + + # We leave any collected profiles in $HOME/jeprof in case the user wants + # to look at them later. We print a message informing them of this. + if ((scalar(@main::profile_files) > 0) && + defined($main::collected_profile)) { + if (scalar(@main::profile_files) == 1) { + print STDERR "Dynamically gathered profile is in $main::collected_profile\n"; + } + print STDERR "If you want to investigate this profile further, you can do:\n"; + print STDERR "\n"; + print STDERR " jeprof \\\n"; + print STDERR " $main::prog \\\n"; + print STDERR " $main::collected_profile\n"; + print STDERR "\n"; + } +} + +sub sighandler { + cleanup(); + exit(1); +} + +sub error { + my $msg = shift; + print STDERR $msg; + cleanup(); + exit(1); +} + + +# Run $nm_command and get all the resulting procedure boundaries whose +# names match "$regexp" and returns them in a hashtable mapping from +# procedure name to a two-element vector of [start address, end address] +sub GetProcedureBoundariesViaNm { + my $escaped_nm_command = shift; # shell-escaped + my $regexp = shift; + + my $symbol_table = {}; + open(NM, "$escaped_nm_command |") || error("$escaped_nm_command: $!\n"); + my $last_start = "0"; + my $routine = ""; + while (<NM>) { + s/\r//g; # turn windows-looking lines into unix-looking lines + if (m/^\s*([0-9a-f]+) (.) (..*)/) { + my $start_val = $1; + my $type = $2; + my $this_routine = $3; + + # It's possible for two symbols to share the same address, if + # one is a zero-length variable (like __start_google_malloc) or + # one symbol is a weak alias to another (like __libc_malloc). + # In such cases, we want to ignore all values except for the + # actual symbol, which in nm-speak has type "T". The logic + # below does this, though it's a bit tricky: what happens when + # we have a series of lines with the same address, is the first + # one gets queued up to be processed. However, it won't + # *actually* be processed until later, when we read a line with + # a different address. That means that as long as we're reading + # lines with the same address, we have a chance to replace that + # item in the queue, which we do whenever we see a 'T' entry -- + # that is, a line with type 'T'. If we never see a 'T' entry, + # we'll just go ahead and process the first entry (which never + # got touched in the queue), and ignore the others. + if ($start_val eq $last_start && $type =~ /t/i) { + # We are the 'T' symbol at this address, replace previous symbol. + $routine = $this_routine; + next; + } elsif ($start_val eq $last_start) { + # We're not the 'T' symbol at this address, so ignore us. + next; + } + + if ($this_routine eq $sep_symbol) { + $sep_address = HexExtend($start_val); + } + + # Tag this routine with the starting address in case the image + # has multiple occurrences of this routine. We use a syntax + # that resembles template parameters that are automatically + # stripped out by ShortFunctionName() + $this_routine .= "<$start_val>"; + + if (defined($routine) && $routine =~ m/$regexp/) { + $symbol_table->{$routine} = [HexExtend($last_start), + HexExtend($start_val)]; + } + $last_start = $start_val; + $routine = $this_routine; + } elsif (m/^Loaded image name: (.+)/) { + # The win32 nm workalike emits information about the binary it is using. + if ($main::opt_debug) { print STDERR "Using Image $1\n"; } + } elsif (m/^PDB file name: (.+)/) { + # The win32 nm workalike emits information about the pdb it is using. + if ($main::opt_debug) { print STDERR "Using PDB $1\n"; } + } + } + close(NM); + # Handle the last line in the nm output. Unfortunately, we don't know + # how big this last symbol is, because we don't know how big the file + # is. For now, we just give it a size of 0. + # TODO(csilvers): do better here. + if (defined($routine) && $routine =~ m/$regexp/) { + $symbol_table->{$routine} = [HexExtend($last_start), + HexExtend($last_start)]; + } + return $symbol_table; +} + +# Gets the procedure boundaries for all routines in "$image" whose names +# match "$regexp" and returns them in a hashtable mapping from procedure +# name to a two-element vector of [start address, end address]. +# Will return an empty map if nm is not installed or not working properly. +sub GetProcedureBoundaries { + my $image = shift; + my $regexp = shift; + + # If $image doesn't start with /, then put ./ in front of it. This works + # around an obnoxious bug in our probing of nm -f behavior. + # "nm -f $image" is supposed to fail on GNU nm, but if: + # + # a. $image starts with [BbSsPp] (for example, bin/foo/bar), AND + # b. you have a.out in your current directory (a not uncommon occurence) + # + # then "nm -f $image" succeeds because -f only looks at the first letter of + # the argument, which looks valid because it's [BbSsPp], and then since + # there's no image provided, it looks for a.out and finds it. + # + # This regex makes sure that $image starts with . or /, forcing the -f + # parsing to fail since . and / are not valid formats. + $image =~ s#^[^/]#./$&#; + + # For libc libraries, the copy in /usr/lib/debug contains debugging symbols + my $debugging = DebuggingLibrary($image); + if ($debugging) { + $image = $debugging; + } + + my $nm = $obj_tool_map{"nm"}; + my $cppfilt = $obj_tool_map{"c++filt"}; + + # nm can fail for two reasons: 1) $image isn't a debug library; 2) nm + # binary doesn't support --demangle. In addition, for OS X we need + # to use the -f flag to get 'flat' nm output (otherwise we don't sort + # properly and get incorrect results). Unfortunately, GNU nm uses -f + # in an incompatible way. So first we test whether our nm supports + # --demangle and -f. + my $demangle_flag = ""; + my $cppfilt_flag = ""; + my $to_devnull = ">$dev_null 2>&1"; + if (system(ShellEscape($nm, "--demangle", "image") . $to_devnull) == 0) { + # In this mode, we do "nm --demangle <foo>" + $demangle_flag = "--demangle"; + $cppfilt_flag = ""; + } elsif (system(ShellEscape($cppfilt, $image) . $to_devnull) == 0) { + # In this mode, we do "nm <foo> | c++filt" + $cppfilt_flag = " | " . ShellEscape($cppfilt); + }; + my $flatten_flag = ""; + if (system(ShellEscape($nm, "-f", $image) . $to_devnull) == 0) { + $flatten_flag = "-f"; + } + + # Finally, in the case $imagie isn't a debug library, we try again with + # -D to at least get *exported* symbols. If we can't use --demangle, + # we use c++filt instead, if it exists on this system. + my @nm_commands = (ShellEscape($nm, "-n", $flatten_flag, $demangle_flag, + $image) . " 2>$dev_null $cppfilt_flag", + ShellEscape($nm, "-D", "-n", $flatten_flag, $demangle_flag, + $image) . " 2>$dev_null $cppfilt_flag", + # 6nm is for Go binaries + ShellEscape("6nm", "$image") . " 2>$dev_null | sort", + ); + + # If the executable is an MS Windows PDB-format executable, we'll + # have set up obj_tool_map("nm_pdb"). In this case, we actually + # want to use both unix nm and windows-specific nm_pdb, since + # PDB-format executables can apparently include dwarf .o files. + if (exists $obj_tool_map{"nm_pdb"}) { + push(@nm_commands, + ShellEscape($obj_tool_map{"nm_pdb"}, "--demangle", $image) + . " 2>$dev_null"); + } + + foreach my $nm_command (@nm_commands) { + my $symbol_table = GetProcedureBoundariesViaNm($nm_command, $regexp); + return $symbol_table if (%{$symbol_table}); + } + my $symbol_table = {}; + return $symbol_table; +} + + +# The test vectors for AddressAdd/Sub/Inc are 8-16-nibble hex strings. +# To make them more readable, we add underscores at interesting places. +# This routine removes the underscores, producing the canonical representation +# used by jeprof to represent addresses, particularly in the tested routines. +sub CanonicalHex { + my $arg = shift; + return join '', (split '_',$arg); +} + + +# Unit test for AddressAdd: +sub AddressAddUnitTest { + my $test_data_8 = shift; + my $test_data_16 = shift; + my $error_count = 0; + my $fail_count = 0; + my $pass_count = 0; + # print STDERR "AddressAddUnitTest: ", 1+$#{$test_data_8}, " tests\n"; + + # First a few 8-nibble addresses. Note that this implementation uses + # plain old arithmetic, so a quick sanity check along with verifying what + # happens to overflow (we want it to wrap): + $address_length = 8; + foreach my $row (@{$test_data_8}) { + if ($main::opt_debug and $main::opt_test) { print STDERR "@{$row}\n"; } + my $sum = AddressAdd ($row->[0], $row->[1]); + if ($sum ne $row->[2]) { + printf STDERR "ERROR: %s != %s + %s = %s\n", $sum, + $row->[0], $row->[1], $row->[2]; + ++$fail_count; + } else { + ++$pass_count; + } + } + printf STDERR "AddressAdd 32-bit tests: %d passes, %d failures\n", + $pass_count, $fail_count; + $error_count = $fail_count; + $fail_count = 0; + $pass_count = 0; + + # Now 16-nibble addresses. + $address_length = 16; + foreach my $row (@{$test_data_16}) { + if ($main::opt_debug and $main::opt_test) { print STDERR "@{$row}\n"; } + my $sum = AddressAdd (CanonicalHex($row->[0]), CanonicalHex($row->[1])); + my $expected = join '', (split '_',$row->[2]); + if ($sum ne CanonicalHex($row->[2])) { + printf STDERR "ERROR: %s != %s + %s = %s\n", $sum, + $row->[0], $row->[1], $row->[2]; + ++$fail_count; + } else { + ++$pass_count; + } + } + printf STDERR "AddressAdd 64-bit tests: %d passes, %d failures\n", + $pass_count, $fail_count; + $error_count += $fail_count; + + return $error_count; +} + + +# Unit test for AddressSub: +sub AddressSubUnitTest { + my $test_data_8 = shift; + my $test_data_16 = shift; + my $error_count = 0; + my $fail_count = 0; + my $pass_count = 0; + # print STDERR "AddressSubUnitTest: ", 1+$#{$test_data_8}, " tests\n"; + + # First a few 8-nibble addresses. Note that this implementation uses + # plain old arithmetic, so a quick sanity check along with verifying what + # happens to overflow (we want it to wrap): + $address_length = 8; + foreach my $row (@{$test_data_8}) { + if ($main::opt_debug and $main::opt_test) { print STDERR "@{$row}\n"; } + my $sum = AddressSub ($row->[0], $row->[1]); + if ($sum ne $row->[3]) { + printf STDERR "ERROR: %s != %s - %s = %s\n", $sum, + $row->[0], $row->[1], $row->[3]; + ++$fail_count; + } else { + ++$pass_count; + } + } + printf STDERR "AddressSub 32-bit tests: %d passes, %d failures\n", + $pass_count, $fail_count; + $error_count = $fail_count; + $fail_count = 0; + $pass_count = 0; + + # Now 16-nibble addresses. + $address_length = 16; + foreach my $row (@{$test_data_16}) { + if ($main::opt_debug and $main::opt_test) { print STDERR "@{$row}\n"; } + my $sum = AddressSub (CanonicalHex($row->[0]), CanonicalHex($row->[1])); + if ($sum ne CanonicalHex($row->[3])) { + printf STDERR "ERROR: %s != %s - %s = %s\n", $sum, + $row->[0], $row->[1], $row->[3]; + ++$fail_count; + } else { + ++$pass_count; + } + } + printf STDERR "AddressSub 64-bit tests: %d passes, %d failures\n", + $pass_count, $fail_count; + $error_count += $fail_count; + + return $error_count; +} + + +# Unit test for AddressInc: +sub AddressIncUnitTest { + my $test_data_8 = shift; + my $test_data_16 = shift; + my $error_count = 0; + my $fail_count = 0; + my $pass_count = 0; + # print STDERR "AddressIncUnitTest: ", 1+$#{$test_data_8}, " tests\n"; + + # First a few 8-nibble addresses. Note that this implementation uses + # plain old arithmetic, so a quick sanity check along with verifying what + # happens to overflow (we want it to wrap): + $address_length = 8; + foreach my $row (@{$test_data_8}) { + if ($main::opt_debug and $main::opt_test) { print STDERR "@{$row}\n"; } + my $sum = AddressInc ($row->[0]); + if ($sum ne $row->[4]) { + printf STDERR "ERROR: %s != %s + 1 = %s\n", $sum, + $row->[0], $row->[4]; + ++$fail_count; + } else { + ++$pass_count; + } + } + printf STDERR "AddressInc 32-bit tests: %d passes, %d failures\n", + $pass_count, $fail_count; + $error_count = $fail_count; + $fail_count = 0; + $pass_count = 0; + + # Now 16-nibble addresses. + $address_length = 16; + foreach my $row (@{$test_data_16}) { + if ($main::opt_debug and $main::opt_test) { print STDERR "@{$row}\n"; } + my $sum = AddressInc (CanonicalHex($row->[0])); + if ($sum ne CanonicalHex($row->[4])) { + printf STDERR "ERROR: %s != %s + 1 = %s\n", $sum, + $row->[0], $row->[4]; + ++$fail_count; + } else { + ++$pass_count; + } + } + printf STDERR "AddressInc 64-bit tests: %d passes, %d failures\n", + $pass_count, $fail_count; + $error_count += $fail_count; + + return $error_count; +} + + +# Driver for unit tests. +# Currently just the address add/subtract/increment routines for 64-bit. +sub RunUnitTests { + my $error_count = 0; + + # This is a list of tuples [a, b, a+b, a-b, a+1] + my $unit_test_data_8 = [ + [qw(aaaaaaaa 50505050 fafafafa 5a5a5a5a aaaaaaab)], + [qw(50505050 aaaaaaaa fafafafa a5a5a5a6 50505051)], + [qw(ffffffff aaaaaaaa aaaaaaa9 55555555 00000000)], + [qw(00000001 ffffffff 00000000 00000002 00000002)], + [qw(00000001 fffffff0 fffffff1 00000011 00000002)], + ]; + my $unit_test_data_16 = [ + # The implementation handles data in 7-nibble chunks, so those are the + # interesting boundaries. + [qw(aaaaaaaa 50505050 + 00_000000f_afafafa 00_0000005_a5a5a5a 00_000000a_aaaaaab)], + [qw(50505050 aaaaaaaa + 00_000000f_afafafa ff_ffffffa_5a5a5a6 00_0000005_0505051)], + [qw(ffffffff aaaaaaaa + 00_000001a_aaaaaa9 00_0000005_5555555 00_0000010_0000000)], + [qw(00000001 ffffffff + 00_0000010_0000000 ff_ffffff0_0000002 00_0000000_0000002)], + [qw(00000001 fffffff0 + 00_000000f_ffffff1 ff_ffffff0_0000011 00_0000000_0000002)], + + [qw(00_a00000a_aaaaaaa 50505050 + 00_a00000f_afafafa 00_a000005_a5a5a5a 00_a00000a_aaaaaab)], + [qw(0f_fff0005_0505050 aaaaaaaa + 0f_fff000f_afafafa 0f_ffefffa_5a5a5a6 0f_fff0005_0505051)], + [qw(00_000000f_fffffff 01_800000a_aaaaaaa + 01_800001a_aaaaaa9 fe_8000005_5555555 00_0000010_0000000)], + [qw(00_0000000_0000001 ff_fffffff_fffffff + 00_0000000_0000000 00_0000000_0000002 00_0000000_0000002)], + [qw(00_0000000_0000001 ff_fffffff_ffffff0 + ff_fffffff_ffffff1 00_0000000_0000011 00_0000000_0000002)], + ]; + + $error_count += AddressAddUnitTest($unit_test_data_8, $unit_test_data_16); + $error_count += AddressSubUnitTest($unit_test_data_8, $unit_test_data_16); + $error_count += AddressIncUnitTest($unit_test_data_8, $unit_test_data_16); + if ($error_count > 0) { + print STDERR $error_count, " errors: FAILED\n"; + } else { + print STDERR "PASS\n"; + } + exit ($error_count); +} |