diff options
Diffstat (limited to 'media/libjpeg/simd/jsimd_mips_dspr2_asm.h')
| -rw-r--r-- | media/libjpeg/simd/jsimd_mips_dspr2_asm.h | 285 |
1 files changed, 285 insertions, 0 deletions
diff --git a/media/libjpeg/simd/jsimd_mips_dspr2_asm.h b/media/libjpeg/simd/jsimd_mips_dspr2_asm.h new file mode 100644 index 000000000..64f988048 --- /dev/null +++ b/media/libjpeg/simd/jsimd_mips_dspr2_asm.h @@ -0,0 +1,285 @@ +/* + * MIPS DSPr2 optimizations for libjpeg-turbo + * + * Copyright (C) 2013, MIPS Technologies, Inc., California. + * All Rights Reserved. + * Authors: Teodora Novkovic (teodora.novkovic@imgtec.com) + * Darko Laus (darko.laus@imgtec.com) + * This software is provided 'as-is', without any express or implied + * warranty. In no event will the authors be held liable for any damages + * arising from the use of this software. + * + * Permission is granted to anyone to use this software for any purpose, + * including commercial applications, and to alter it and redistribute it + * freely, subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you must not + * claim that you wrote the original software. If you use this software + * in a product, an acknowledgment in the product documentation would be + * appreciated but is not required. + * 2. Altered source versions must be plainly marked as such, and must not be + * misrepresented as being the original software. + * 3. This notice may not be removed or altered from any source distribution. + */ + +#define zero $0 +#define AT $1 +#define v0 $2 +#define v1 $3 +#define a0 $4 +#define a1 $5 +#define a2 $6 +#define a3 $7 +#define t0 $8 +#define t1 $9 +#define t2 $10 +#define t3 $11 +#define t4 $12 +#define t5 $13 +#define t6 $14 +#define t7 $15 +#define s0 $16 +#define s1 $17 +#define s2 $18 +#define s3 $19 +#define s4 $20 +#define s5 $21 +#define s6 $22 +#define s7 $23 +#define t8 $24 +#define t9 $25 +#define k0 $26 +#define k1 $27 +#define gp $28 +#define sp $29 +#define fp $30 +#define s8 $30 +#define ra $31 + +#define f0 $f0 +#define f1 $f1 +#define f2 $f2 +#define f3 $f3 +#define f4 $f4 +#define f5 $f5 +#define f6 $f6 +#define f7 $f7 +#define f8 $f8 +#define f9 $f9 +#define f10 $f10 +#define f11 $f11 +#define f12 $f12 +#define f13 $f13 +#define f14 $f14 +#define f15 $f15 +#define f16 $f16 +#define f17 $f17 +#define f18 $f18 +#define f19 $f19 +#define f20 $f20 +#define f21 $f21 +#define f22 $f22 +#define f23 $f23 +#define f24 $f24 +#define f25 $f25 +#define f26 $f26 +#define f27 $f27 +#define f28 $f28 +#define f29 $f29 +#define f30 $f30 +#define f31 $f31 + +/* + * LEAF_MIPS32R2 - declare leaf routine for MIPS32r2 + */ +#define LEAF_MIPS32R2(symbol) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ +symbol: .frame sp, 0, ra; \ + .set push; \ + .set arch=mips32r2; \ + .set noreorder; \ + .set noat; + +/* + * LEAF_MIPS_DSPR2 - declare leaf routine for MIPS DSPr2 + */ +#define LEAF_MIPS_DSPR2(symbol) \ +LEAF_MIPS32R2(symbol) \ + .set dspr2; + +/* + * END - mark end of function + */ +#define END(function) \ + .set pop; \ + .end function; \ + .size function,.-function + +/* + * Checks if stack offset is big enough for storing/restoring regs_num + * number of register to/from stack. Stack offset must be greater than + * or equal to the number of bytes needed for storing registers (regs_num*4). + * Since MIPS ABI allows usage of first 16 bytes of stack frame (this is + * preserved for input arguments of the functions, already stored in a0-a3), + * stack size can be further optimized by utilizing this space. + */ +.macro CHECK_STACK_OFFSET regs_num, stack_offset +.if \stack_offset < \regs_num * 4 - 16 +.error "Stack offset too small." +.endif +.endm + +/* + * Saves set of registers on stack. Maximum number of registers that + * can be saved on stack is limitted to 14 (a0-a3, v0-v1 and s0-s7). + * Stack offset is number of bytes that are added to stack pointer (sp) + * before registers are pushed in order to provide enough space on stack + * (offset must be multiple of 4, and must be big enough, as described by + * CHECK_STACK_OFFSET macro). This macro is intended to be used in + * combination with RESTORE_REGS_FROM_STACK macro. Example: + * SAVE_REGS_ON_STACK 4, v0, v1, s0, s1 + * RESTORE_REGS_FROM_STACK 4, v0, v1, s0, s1 + */ +.macro SAVE_REGS_ON_STACK stack_offset = 0, r1, \ + r2 = 0, r3 = 0, r4 = 0, \ + r5 = 0, r6 = 0, r7 = 0, \ + r8 = 0, r9 = 0, r10 = 0, \ + r11 = 0, r12 = 0, r13 = 0, \ + r14 = 0 + .if (\stack_offset < 0) || (\stack_offset - (\stack_offset / 4) * 4) + .error "Stack offset must be pozitive and multiple of 4." + .endif + .if \stack_offset != 0 + addiu sp, sp, -\stack_offset + .endif + sw \r1, 0(sp) + .if \r2 != 0 + sw \r2, 4(sp) + .endif + .if \r3 != 0 + sw \r3, 8(sp) + .endif + .if \r4 != 0 + sw \r4, 12(sp) + .endif + .if \r5 != 0 + CHECK_STACK_OFFSET 5, \stack_offset + sw \r5, 16(sp) + .endif + .if \r6 != 0 + CHECK_STACK_OFFSET 6, \stack_offset + sw \r6, 20(sp) + .endif + .if \r7 != 0 + CHECK_STACK_OFFSET 7, \stack_offset + sw \r7, 24(sp) + .endif + .if \r8 != 0 + CHECK_STACK_OFFSET 8, \stack_offset + sw \r8, 28(sp) + .endif + .if \r9 != 0 + CHECK_STACK_OFFSET 9, \stack_offset + sw \r9, 32(sp) + .endif + .if \r10 != 0 + CHECK_STACK_OFFSET 10, \stack_offset + sw \r10, 36(sp) + .endif + .if \r11 != 0 + CHECK_STACK_OFFSET 11, \stack_offset + sw \r11, 40(sp) + .endif + .if \r12 != 0 + CHECK_STACK_OFFSET 12, \stack_offset + sw \r12, 44(sp) + .endif + .if \r13 != 0 + CHECK_STACK_OFFSET 13, \stack_offset + sw \r13, 48(sp) + .endif + .if \r14 != 0 + CHECK_STACK_OFFSET 14, \stack_offset + sw \r14, 52(sp) + .endif +.endm + +/* + * Restores set of registers from stack. Maximum number of registers that + * can be restored from stack is limitted to 14 (a0-a3, v0-v1 and s0-s7). + * Stack offset is number of bytes that are added to stack pointer (sp) + * after registers are restored (offset must be multiple of 4, and must + * be big enough, as described by CHECK_STACK_OFFSET macro). This macro is + * intended to be used in combination with RESTORE_REGS_FROM_STACK macro. + * Example: + * SAVE_REGS_ON_STACK 4, v0, v1, s0, s1 + * RESTORE_REGS_FROM_STACK 4, v0, v1, s0, s1 + */ +.macro RESTORE_REGS_FROM_STACK stack_offset = 0, r1, \ + r2 = 0, r3 = 0, r4 = 0, \ + r5 = 0, r6 = 0, r7 = 0, \ + r8 = 0, r9 = 0, r10 = 0, \ + r11 = 0, r12 = 0, r13 = 0, \ + r14 = 0 + .if (\stack_offset < 0) || (\stack_offset - (\stack_offset/4)*4) + .error "Stack offset must be pozitive and multiple of 4." + .endif + lw \r1, 0(sp) + .if \r2 != 0 + lw \r2, 4(sp) + .endif + .if \r3 != 0 + lw \r3, 8(sp) + .endif + .if \r4 != 0 + lw \r4, 12(sp) + .endif + .if \r5 != 0 + CHECK_STACK_OFFSET 5, \stack_offset + lw \r5, 16(sp) + .endif + .if \r6 != 0 + CHECK_STACK_OFFSET 6, \stack_offset + lw \r6, 20(sp) + .endif + .if \r7 != 0 + CHECK_STACK_OFFSET 7, \stack_offset + lw \r7, 24(sp) + .endif + .if \r8 != 0 + CHECK_STACK_OFFSET 8, \stack_offset + lw \r8, 28(sp) + .endif + .if \r9 != 0 + CHECK_STACK_OFFSET 9, \stack_offset + lw \r9, 32(sp) + .endif + .if \r10 != 0 + CHECK_STACK_OFFSET 10, \stack_offset + lw \r10, 36(sp) + .endif + .if \r11 != 0 + CHECK_STACK_OFFSET 11, \stack_offset + lw \r11, 40(sp) + .endif + .if \r12 != 0 + CHECK_STACK_OFFSET 12, \stack_offset + lw \r12, 44(sp) + .endif + .if \r13 != 0 + CHECK_STACK_OFFSET 13, \stack_offset + lw \r13, 48(sp) + .endif + .if \r14 != 0 + CHECK_STACK_OFFSET 14, \stack_offset + lw \r14, 52(sp) + .endif + .if \stack_offset != 0 + addiu sp, sp, \stack_offset + .endif +.endm + + |