diff options
Diffstat (limited to 'dom/system/gonk/android_audio/EffectApi.h')
| -rw-r--r-- | dom/system/gonk/android_audio/EffectApi.h | 798 |
1 files changed, 0 insertions, 798 deletions
diff --git a/dom/system/gonk/android_audio/EffectApi.h b/dom/system/gonk/android_audio/EffectApi.h deleted file mode 100644 index 729545d0c..000000000 --- a/dom/system/gonk/android_audio/EffectApi.h +++ /dev/null @@ -1,798 +0,0 @@ -/* - * Copyright (C) 2010 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_EFFECTAPI_H_ -#define ANDROID_EFFECTAPI_H_ - -#include <errno.h> -#include <stdint.h> -#include <sys/types.h> - -#if __cplusplus -extern "C" { -#endif - -///////////////////////////////////////////////// -// Effect control interface -///////////////////////////////////////////////// - -// The effect control interface is exposed by each effect engine implementation. It consists of -// a set of functions controlling the configuration, activation and process of the engine. -// The functions are grouped in a structure of type effect_interface_s: -// struct effect_interface_s { -// effect_process_t process; -// effect_command_t command; -// }; - - -// effect_interface_t: Effect control interface handle. -// The effect_interface_t serves two purposes regarding the implementation of the effect engine: -// - 1 it is the address of a pointer to an effect_interface_s structure where the functions -// of the effect control API for a particular effect are located. -// - 2 it is the address of the context of a particular effect instance. -// A typical implementation in the effect library would define a structure as follows: -// struct effect_module_s { -// const struct effect_interface_s *itfe; -// effect_config_t config; -// effect_context_t context; -// } -// The implementation of EffectCreate() function would then allocate a structure of this -// type and return its address as effect_interface_t -typedef struct effect_interface_s **effect_interface_t; - - -// Effect API version 1.0 -#define EFFECT_API_VERSION 0x0100 // Format 0xMMmm MM: Major version, mm: minor version - -// Maximum length of character strings in structures defines by this API. -#define EFFECT_STRING_LEN_MAX 64 - -// -//--- Effect descriptor structure effect_descriptor_t -// - -// Unique effect ID (can be generated from the following site: -// http://www.itu.int/ITU-T/asn1/uuid.html) -// This format is used for both "type" and "uuid" fields of the effect descriptor structure. -// - When used for effect type and the engine is implementing and effect corresponding to a standard -// OpenSL ES interface, this ID must be the one defined in OpenSLES_IID.h for that interface. -// - When used as uuid, it should be a unique UUID for this particular implementation. -typedef struct effect_uuid_s { - uint32_t timeLow; - uint16_t timeMid; - uint16_t timeHiAndVersion; - uint16_t clockSeq; - uint8_t node[6]; -} effect_uuid_t; - -// NULL UUID definition (matches SL_IID_NULL_) -#define EFFECT_UUID_INITIALIZER { 0xec7178ec, 0xe5e1, 0x4432, 0xa3f4, \ - { 0x46, 0x57, 0xe6, 0x79, 0x52, 0x10 } } -static const effect_uuid_t EFFECT_UUID_NULL_ = EFFECT_UUID_INITIALIZER; -const effect_uuid_t * const EFFECT_UUID_NULL = &EFFECT_UUID_NULL_; -const char * const EFFECT_UUID_NULL_STR = "ec7178ec-e5e1-4432-a3f4-4657e6795210"; - -// The effect descriptor contains necessary information to facilitate the enumeration of the effect -// engines present in a library. -typedef struct effect_descriptor_s { - effect_uuid_t type; // UUID of to the OpenSL ES interface implemented by this effect - effect_uuid_t uuid; // UUID for this particular implementation - uint16_t apiVersion; // Version of the effect API implemented: matches EFFECT_API_VERSION - uint32_t flags; // effect engine capabilities/requirements flags (see below) - uint16_t cpuLoad; // CPU load indication (see below) - uint16_t memoryUsage; // Data Memory usage (see below) - char name[EFFECT_STRING_LEN_MAX]; // human readable effect name - char implementor[EFFECT_STRING_LEN_MAX]; // human readable effect implementor name -} effect_descriptor_t; - -// CPU load and memory usage indication: each effect implementation must provide an indication of -// its CPU and memory usage for the audio effect framework to limit the number of effects -// instantiated at a given time on a given platform. -// The CPU load is expressed in 0.1 MIPS units as estimated on an ARM9E core (ARMv5TE) with 0 WS. -// The memory usage is expressed in KB and includes only dynamically allocated memory - -// Definitions for flags field of effect descriptor. -// +---------------------------+-----------+----------------------------------- -// | description | bits | values -// +---------------------------+-----------+----------------------------------- -// | connection mode | 0..1 | 0 insert: after track process -// | | | 1 auxiliary: connect to track auxiliary -// | | | output and use send level -// | | | 2 replace: replaces track process function; -// | | | must implement SRC, volume and mono to stereo. -// | | | 3 reserved -// +---------------------------+-----------+----------------------------------- -// | insertion preference | 2..4 | 0 none -// | | | 1 first of the chain -// | | | 2 last of the chain -// | | | 3 exclusive (only effect in the insert chain) -// | | | 4..7 reserved -// +---------------------------+-----------+----------------------------------- -// | Volume management | 5..6 | 0 none -// | | | 1 implements volume control -// | | | 2 requires volume indication -// | | | 3 reserved -// +---------------------------+-----------+----------------------------------- -// | Device indication | 7..8 | 0 none -// | | | 1 requires device updates -// | | | 2..3 reserved -// +---------------------------+-----------+----------------------------------- -// | Sample input mode | 9..10 | 0 direct: process() function or EFFECT_CMD_CONFIGURE -// | | | command must specify a buffer descriptor -// | | | 1 provider: process() function uses the -// | | | bufferProvider indicated by the -// | | | EFFECT_CMD_CONFIGURE command to request input. -// | | | buffers. -// | | | 2 both: both input modes are supported -// | | | 3 reserved -// +---------------------------+-----------+----------------------------------- -// | Sample output mode | 11..12 | 0 direct: process() function or EFFECT_CMD_CONFIGURE -// | | | command must specify a buffer descriptor -// | | | 1 provider: process() function uses the -// | | | bufferProvider indicated by the -// | | | EFFECT_CMD_CONFIGURE command to request output -// | | | buffers. -// | | | 2 both: both output modes are supported -// | | | 3 reserved -// +---------------------------+-----------+----------------------------------- -// | Hardware acceleration | 13..15 | 0 No hardware acceleration -// | | | 1 non tunneled hw acceleration: the process() function -// | | | reads the samples, send them to HW accelerated -// | | | effect processor, reads back the processed samples -// | | | and returns them to the output buffer. -// | | | 2 tunneled hw acceleration: the process() function is -// | | | transparent. The effect interface is only used to -// | | | control the effect engine. This mode is relevant for -// | | | global effects actually applied by the audio -// | | | hardware on the output stream. -// +---------------------------+-----------+----------------------------------- -// | Audio Mode indication | 16..17 | 0 none -// | | | 1 requires audio mode updates -// | | | 2..3 reserved -// +---------------------------+-----------+----------------------------------- - -// Insert mode -#define EFFECT_FLAG_TYPE_MASK 0x00000003 -#define EFFECT_FLAG_TYPE_INSERT 0x00000000 -#define EFFECT_FLAG_TYPE_AUXILIARY 0x00000001 -#define EFFECT_FLAG_TYPE_REPLACE 0x00000002 - -// Insert preference -#define EFFECT_FLAG_INSERT_MASK 0x0000001C -#define EFFECT_FLAG_INSERT_ANY 0x00000000 -#define EFFECT_FLAG_INSERT_FIRST 0x00000004 -#define EFFECT_FLAG_INSERT_LAST 0x00000008 -#define EFFECT_FLAG_INSERT_EXCLUSIVE 0x0000000C - - -// Volume control -#define EFFECT_FLAG_VOLUME_MASK 0x00000060 -#define EFFECT_FLAG_VOLUME_CTRL 0x00000020 -#define EFFECT_FLAG_VOLUME_IND 0x00000040 -#define EFFECT_FLAG_VOLUME_NONE 0x00000000 - -// Device indication -#define EFFECT_FLAG_DEVICE_MASK 0x00000180 -#define EFFECT_FLAG_DEVICE_IND 0x00000080 -#define EFFECT_FLAG_DEVICE_NONE 0x00000000 - -// Sample input modes -#define EFFECT_FLAG_INPUT_MASK 0x00000600 -#define EFFECT_FLAG_INPUT_DIRECT 0x00000000 -#define EFFECT_FLAG_INPUT_PROVIDER 0x00000200 -#define EFFECT_FLAG_INPUT_BOTH 0x00000400 - -// Sample output modes -#define EFFECT_FLAG_OUTPUT_MASK 0x00001800 -#define EFFECT_FLAG_OUTPUT_DIRECT 0x00000000 -#define EFFECT_FLAG_OUTPUT_PROVIDER 0x00000800 -#define EFFECT_FLAG_OUTPUT_BOTH 0x00001000 - -// Hardware acceleration mode -#define EFFECT_FLAG_HW_ACC_MASK 0x00006000 -#define EFFECT_FLAG_HW_ACC_SIMPLE 0x00002000 -#define EFFECT_FLAG_HW_ACC_TUNNEL 0x00004000 - -// Audio mode indication -#define EFFECT_FLAG_AUDIO_MODE_MASK 0x00018000 -#define EFFECT_FLAG_AUDIO_MODE_IND 0x00008000 -#define EFFECT_FLAG_AUDIO_MODE_NONE 0x00000000 - -// Forward definition of type audio_buffer_t -typedef struct audio_buffer_s audio_buffer_t; - -//////////////////////////////////////////////////////////////////////////////// -// -// Function: process -// -// Description: Effect process function. Takes input samples as specified -// (count and location) in input buffer descriptor and output processed -// samples as specified in output buffer descriptor. If the buffer descriptor -// is not specified the function must use either the buffer or the -// buffer provider function installed by the EFFECT_CMD_CONFIGURE command. -// The effect framework will call the process() function after the EFFECT_CMD_ENABLE -// command is received and until the EFFECT_CMD_DISABLE is received. When the engine -// receives the EFFECT_CMD_DISABLE command it should turn off the effect gracefully -// and when done indicate that it is OK to stop calling the process() function by -// returning the -ENODATA status. -// -// NOTE: the process() function implementation should be "real-time safe" that is -// it should not perform blocking calls: malloc/free, sleep, read/write/open/close, -// pthread_cond_wait/pthread_mutex_lock... -// -// Input: -// effect_interface_t: handle to the effect interface this function -// is called on. -// inBuffer: buffer descriptor indicating where to read samples to process. -// If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command. -// -// inBuffer: buffer descriptor indicating where to write processed samples. -// If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command. -// -// Output: -// returned value: 0 successful operation -// -ENODATA the engine has finished the disable phase and the framework -// can stop calling process() -// -EINVAL invalid interface handle or -// invalid input/output buffer description -//////////////////////////////////////////////////////////////////////////////// -typedef int32_t (*effect_process_t)(effect_interface_t self, - audio_buffer_t *inBuffer, - audio_buffer_t *outBuffer); - -//////////////////////////////////////////////////////////////////////////////// -// -// Function: command -// -// Description: Send a command and receive a response to/from effect engine. -// -// Input: -// effect_interface_t: handle to the effect interface this function -// is called on. -// cmdCode: command code: the command can be a standardized command defined in -// effect_command_e (see below) or a proprietary command. -// cmdSize: size of command in bytes -// pCmdData: pointer to command data -// pReplyData: pointer to reply data -// -// Input/Output: -// replySize: maximum size of reply data as input -// actual size of reply data as output -// -// Output: -// returned value: 0 successful operation -// -EINVAL invalid interface handle or -// invalid command/reply size or format according to command code -// The return code should be restricted to indicate problems related to the this -// API specification. Status related to the execution of a particular command should be -// indicated as part of the reply field. -// -// *pReplyData updated with command response -// -//////////////////////////////////////////////////////////////////////////////// -typedef int32_t (*effect_command_t)(effect_interface_t self, - uint32_t cmdCode, - uint32_t cmdSize, - void *pCmdData, - uint32_t *replySize, - void *pReplyData); - - -// Effect control interface definition -struct effect_interface_s { - effect_process_t process; - effect_command_t command; -}; - - -// -//--- Standardized command codes for command() function -// -enum effect_command_e { - EFFECT_CMD_INIT, // initialize effect engine - EFFECT_CMD_CONFIGURE, // configure effect engine (see effect_config_t) - EFFECT_CMD_RESET, // reset effect engine - EFFECT_CMD_ENABLE, // enable effect process - EFFECT_CMD_DISABLE, // disable effect process - EFFECT_CMD_SET_PARAM, // set parameter immediately (see effect_param_t) - EFFECT_CMD_SET_PARAM_DEFERRED, // set parameter deferred - EFFECT_CMD_SET_PARAM_COMMIT, // commit previous set parameter deferred - EFFECT_CMD_GET_PARAM, // get parameter - EFFECT_CMD_SET_DEVICE, // set audio device (see audio_device_e) - EFFECT_CMD_SET_VOLUME, // set volume - EFFECT_CMD_SET_AUDIO_MODE, // set the audio mode (normal, ring, ...) - EFFECT_CMD_FIRST_PROPRIETARY = 0x10000 // first proprietary command code -}; - -//================================================================================================== -// command: EFFECT_CMD_INIT -//-------------------------------------------------------------------------------------------------- -// description: -// Initialize effect engine: All configurations return to default -//-------------------------------------------------------------------------------------------------- -// command format: -// size: 0 -// data: N/A -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: sizeof(int) -// data: status -//================================================================================================== -// command: EFFECT_CMD_CONFIGURE -//-------------------------------------------------------------------------------------------------- -// description: -// Apply new audio parameters configurations for input and output buffers -//-------------------------------------------------------------------------------------------------- -// command format: -// size: sizeof(effect_config_t) -// data: effect_config_t -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: sizeof(int) -// data: status -//================================================================================================== -// command: EFFECT_CMD_RESET -//-------------------------------------------------------------------------------------------------- -// description: -// Reset the effect engine. Keep configuration but resets state and buffer content -//-------------------------------------------------------------------------------------------------- -// command format: -// size: 0 -// data: N/A -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: 0 -// data: N/A -//================================================================================================== -// command: EFFECT_CMD_ENABLE -//-------------------------------------------------------------------------------------------------- -// description: -// Enable the process. Called by the framework before the first call to process() -//-------------------------------------------------------------------------------------------------- -// command format: -// size: 0 -// data: N/A -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: sizeof(int) -// data: status -//================================================================================================== -// command: EFFECT_CMD_DISABLE -//-------------------------------------------------------------------------------------------------- -// description: -// Disable the process. Called by the framework after the last call to process() -//-------------------------------------------------------------------------------------------------- -// command format: -// size: 0 -// data: N/A -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: sizeof(int) -// data: status -//================================================================================================== -// command: EFFECT_CMD_SET_PARAM -//-------------------------------------------------------------------------------------------------- -// description: -// Set a parameter and apply it immediately -//-------------------------------------------------------------------------------------------------- -// command format: -// size: sizeof(effect_param_t) + size of param and value -// data: effect_param_t + param + value. See effect_param_t definition below for value offset -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: sizeof(int) -// data: status -//================================================================================================== -// command: EFFECT_CMD_SET_PARAM_DEFERRED -//-------------------------------------------------------------------------------------------------- -// description: -// Set a parameter but apply it only when receiving EFFECT_CMD_SET_PARAM_COMMIT command -//-------------------------------------------------------------------------------------------------- -// command format: -// size: sizeof(effect_param_t) + size of param and value -// data: effect_param_t + param + value. See effect_param_t definition below for value offset -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: 0 -// data: N/A -//================================================================================================== -// command: EFFECT_CMD_SET_PARAM_COMMIT -//-------------------------------------------------------------------------------------------------- -// description: -// Apply all previously received EFFECT_CMD_SET_PARAM_DEFERRED commands -//-------------------------------------------------------------------------------------------------- -// command format: -// size: 0 -// data: N/A -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: sizeof(int) -// data: status -//================================================================================================== -// command: EFFECT_CMD_GET_PARAM -//-------------------------------------------------------------------------------------------------- -// description: -// Get a parameter value -//-------------------------------------------------------------------------------------------------- -// command format: -// size: sizeof(effect_param_t) + size of param -// data: effect_param_t + param -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: sizeof(effect_param_t) + size of param and value -// data: effect_param_t + param + value. See effect_param_t definition below for value offset -//================================================================================================== -// command: EFFECT_CMD_SET_DEVICE -//-------------------------------------------------------------------------------------------------- -// description: -// Set the rendering device the audio output path is connected to. See audio_device_e for device -// values. -// The effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to receive this -// command when the device changes -//-------------------------------------------------------------------------------------------------- -// command format: -// size: sizeof(uint32_t) -// data: audio_device_e -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: 0 -// data: N/A -//================================================================================================== -// command: EFFECT_CMD_SET_VOLUME -//-------------------------------------------------------------------------------------------------- -// description: -// Set and get volume. Used by audio framework to delegate volume control to effect engine. -// The effect implementation must set EFFECT_FLAG_VOLUME_IND or EFFECT_FLAG_VOLUME_CTRL flag in -// its descriptor to receive this command before every call to process() function -// If EFFECT_FLAG_VOLUME_CTRL flag is set in the effect descriptor, the effect engine must return -// the volume that should be applied before the effect is processed. The overall volume (the volume -// actually applied by the effect engine multiplied by the returned value) should match the value -// indicated in the command. -//-------------------------------------------------------------------------------------------------- -// command format: -// size: n * sizeof(uint32_t) -// data: volume for each channel defined in effect_config_t for output buffer expressed in -// 8.24 fixed point format -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: n * sizeof(uint32_t) / 0 -// data: - if EFFECT_FLAG_VOLUME_CTRL is set in effect descriptor: -// volume for each channel defined in effect_config_t for output buffer expressed in -// 8.24 fixed point format -// - if EFFECT_FLAG_VOLUME_CTRL is not set in effect descriptor: -// N/A -// It is legal to receive a null pointer as pReplyData in which case the effect framework has -// delegated volume control to another effect -//================================================================================================== -// command: EFFECT_CMD_SET_AUDIO_MODE -//-------------------------------------------------------------------------------------------------- -// description: -// Set the audio mode. The effect implementation must set EFFECT_FLAG_AUDIO_MODE_IND flag in its -// descriptor to receive this command when the audio mode changes. -//-------------------------------------------------------------------------------------------------- -// command format: -// size: sizeof(uint32_t) -// data: audio_mode_e -//-------------------------------------------------------------------------------------------------- -// reply format: -// size: 0 -// data: N/A -//================================================================================================== -// command: EFFECT_CMD_FIRST_PROPRIETARY -//-------------------------------------------------------------------------------------------------- -// description: -// All proprietary effect commands must use command codes above this value. The size and format of -// command and response fields is free in this case -//================================================================================================== - - -// Audio buffer descriptor used by process(), bufferProvider() functions and buffer_config_t -// structure. Multi-channel audio is always interleaved. The channel order is from LSB to MSB with -// regard to the channel mask definition in audio_channels_e e.g : -// Stereo: left, right -// 5 point 1: front left, front right, front center, low frequency, back left, back right -// The buffer size is expressed in frame count, a frame being composed of samples for all -// channels at a given time. Frame size for unspecified format (AUDIO_FORMAT_OTHER) is 8 bit by -// definition -struct audio_buffer_s { - size_t frameCount; // number of frames in buffer - union { - void* raw; // raw pointer to start of buffer - int32_t* s32; // pointer to signed 32 bit data at start of buffer - int16_t* s16; // pointer to signed 16 bit data at start of buffer - uint8_t* u8; // pointer to unsigned 8 bit data at start of buffer - }; -}; - -// The buffer_provider_s structure contains functions that can be used -// by the effect engine process() function to query and release input -// or output audio buffer. -// The getBuffer() function is called to retrieve a buffer where data -// should read from or written to by process() function. -// The releaseBuffer() function MUST be called when the buffer retrieved -// with getBuffer() is not needed anymore. -// The process function should use the buffer provider mechanism to retrieve -// input or output buffer if the inBuffer or outBuffer passed as argument is NULL -// and the buffer configuration (buffer_config_t) given by the EFFECT_CMD_CONFIGURE -// command did not specify an audio buffer. - -typedef int32_t (* buffer_function_t)(void *cookie, audio_buffer_t *buffer); - -typedef struct buffer_provider_s { - buffer_function_t getBuffer; // retrieve next buffer - buffer_function_t releaseBuffer; // release used buffer - void *cookie; // for use by client of buffer provider functions -} buffer_provider_t; - - -// The buffer_config_s structure specifies the input or output audio format -// to be used by the effect engine. It is part of the effect_config_t -// structure that defines both input and output buffer configurations and is -// passed by the EFFECT_CMD_CONFIGURE command. -typedef struct buffer_config_s { - audio_buffer_t buffer; // buffer for use by process() function if not passed explicitly - uint32_t samplingRate; // sampling rate - uint32_t channels; // channel mask (see audio_channels_e) - buffer_provider_t bufferProvider; // buffer provider - uint8_t format; // Audio format (see audio_format_e) - uint8_t accessMode; // read/write or accumulate in buffer (effect_buffer_access_e) - uint16_t mask; // indicates which of the above fields is valid -} buffer_config_t; - -// Sample format -enum audio_format_e { - SAMPLE_FORMAT_PCM_S15, // PCM signed 16 bits - SAMPLE_FORMAT_PCM_U8, // PCM unsigned 8 bits - SAMPLE_FORMAT_PCM_S7_24, // PCM signed 7.24 fixed point representation - SAMPLE_FORMAT_OTHER // other format (e.g. compressed) -}; - -// Channel mask -enum audio_channels_e { - CHANNEL_FRONT_LEFT = 0x1, // front left channel - CHANNEL_FRONT_RIGHT = 0x2, // front right channel - CHANNEL_FRONT_CENTER = 0x4, // front center channel - CHANNEL_LOW_FREQUENCY = 0x8, // low frequency channel - CHANNEL_BACK_LEFT = 0x10, // back left channel - CHANNEL_BACK_RIGHT = 0x20, // back right channel - CHANNEL_FRONT_LEFT_OF_CENTER = 0x40, // front left of center channel - CHANNEL_FRONT_RIGHT_OF_CENTER = 0x80, // front right of center channel - CHANNEL_BACK_CENTER = 0x100, // back center channel - CHANNEL_MONO = CHANNEL_FRONT_LEFT, - CHANNEL_STEREO = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT), - CHANNEL_QUAD = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | - CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT), - CHANNEL_SURROUND = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | - CHANNEL_FRONT_CENTER | CHANNEL_BACK_CENTER), - CHANNEL_5POINT1 = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | - CHANNEL_FRONT_CENTER | CHANNEL_LOW_FREQUENCY | CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT), - CHANNEL_7POINT1 = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | - CHANNEL_FRONT_CENTER | CHANNEL_LOW_FREQUENCY | CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT | - CHANNEL_FRONT_LEFT_OF_CENTER | CHANNEL_FRONT_RIGHT_OF_CENTER), -}; - -// Render device -enum audio_device_e { - DEVICE_EARPIECE = 0x1, // earpiece - DEVICE_SPEAKER = 0x2, // speaker - DEVICE_WIRED_HEADSET = 0x4, // wired headset, with microphone - DEVICE_WIRED_HEADPHONE = 0x8, // wired headphone, without microphone - DEVICE_BLUETOOTH_SCO = 0x10, // generic bluetooth SCO - DEVICE_BLUETOOTH_SCO_HEADSET = 0x20, // bluetooth SCO headset - DEVICE_BLUETOOTH_SCO_CARKIT = 0x40, // bluetooth SCO car kit - DEVICE_BLUETOOTH_A2DP = 0x80, // generic bluetooth A2DP - DEVICE_BLUETOOTH_A2DP_HEADPHONES = 0x100, // bluetooth A2DP headphones - DEVICE_BLUETOOTH_A2DP_SPEAKER = 0x200, // bluetooth A2DP speakers - DEVICE_AUX_DIGITAL = 0x400, // digital output - DEVICE_EXTERNAL_SPEAKER = 0x800 // external speaker (stereo and High quality) -}; - -#if ANDROID_VERSION < 17 -// Audio mode -enum audio_mode_e { - AUDIO_MODE_NORMAL, // device idle - AUDIO_MODE_RINGTONE, // device ringing - AUDIO_MODE_IN_CALL // audio call connected (VoIP or telephony) -}; -#endif - -// Values for "accessMode" field of buffer_config_t: -// overwrite, read only, accumulate (read/modify/write) -enum effect_buffer_access_e { - EFFECT_BUFFER_ACCESS_WRITE, - EFFECT_BUFFER_ACCESS_READ, - EFFECT_BUFFER_ACCESS_ACCUMULATE - -}; - -// Values for bit field "mask" in buffer_config_t. If a bit is set, the corresponding field -// in buffer_config_t must be taken into account when executing the EFFECT_CMD_CONFIGURE command -#define EFFECT_CONFIG_BUFFER 0x0001 // buffer field must be taken into account -#define EFFECT_CONFIG_SMP_RATE 0x0002 // samplingRate field must be taken into account -#define EFFECT_CONFIG_CHANNELS 0x0004 // channels field must be taken into account -#define EFFECT_CONFIG_FORMAT 0x0008 // format field must be taken into account -#define EFFECT_CONFIG_ACC_MODE 0x0010 // accessMode field must be taken into account -#define EFFECT_CONFIG_PROVIDER 0x0020 // bufferProvider field must be taken into account -#define EFFECT_CONFIG_ALL (EFFECT_CONFIG_BUFFER | EFFECT_CONFIG_SMP_RATE | \ - EFFECT_CONFIG_CHANNELS | EFFECT_CONFIG_FORMAT | \ - EFFECT_CONFIG_ACC_MODE | EFFECT_CONFIG_PROVIDER) - - -// effect_config_s structure describes the format of the pCmdData argument of EFFECT_CMD_CONFIGURE -// command to configure audio parameters and buffers for effect engine input and output. -typedef struct effect_config_s { - buffer_config_t inputCfg; - buffer_config_t outputCfg;; -} effect_config_t; - - -// effect_param_s structure describes the format of the pCmdData argument of EFFECT_CMD_SET_PARAM -// command and pCmdData and pReplyData of EFFECT_CMD_GET_PARAM command. -// psize and vsize represent the actual size of parameter and value. -// -// NOTE: the start of value field inside the data field is always on a 32 bit boundary: -// -// +-----------+ -// | status | sizeof(int) -// +-----------+ -// | psize | sizeof(int) -// +-----------+ -// | vsize | sizeof(int) -// +-----------+ -// | | | | -// ~ parameter ~ > psize | -// | | | > ((psize - 1)/sizeof(int) + 1) * sizeof(int) -// +-----------+ | -// | padding | | -// +-----------+ -// | | | -// ~ value ~ > vsize -// | | | -// +-----------+ - -typedef struct effect_param_s { - int32_t status; // Transaction status (unused for command, used for reply) - uint32_t psize; // Parameter size - uint32_t vsize; // Value size - char data[]; // Start of Parameter + Value data -} effect_param_t; - - -///////////////////////////////////////////////// -// Effect library interface -///////////////////////////////////////////////// - -// An effect library is required to implement and expose the following functions -// to enable effect enumeration and instantiation. The name of these functions must be as -// specified here as the effect framework will get the function address with dlsym(): -// -// - effect_QueryNumberEffects_t EffectQueryNumberEffects; -// - effect_QueryEffect_t EffectQueryEffect; -// - effect_CreateEffect_t EffectCreate; -// - effect_ReleaseEffect_t EffectRelease; - - -//////////////////////////////////////////////////////////////////////////////// -// -// Function: EffectQueryNumberEffects -// -// Description: Returns the number of different effects exposed by the -// library. Each effect must have a unique effect uuid (see -// effect_descriptor_t). This function together with EffectQueryEffect() -// is used to enumerate all effects present in the library. -// -// Input/Output: -// pNumEffects: address where the number of effects should be returned. -// -// Output: -// returned value: 0 successful operation. -// -ENODEV library failed to initialize -// -EINVAL invalid pNumEffects -// *pNumEffects: updated with number of effects in library -// -//////////////////////////////////////////////////////////////////////////////// -typedef int32_t (*effect_QueryNumberEffects_t)(uint32_t *pNumEffects); - -//////////////////////////////////////////////////////////////////////////////// -// -// Function: EffectQueryEffect -// -// Description: Returns the descriptor of the effect engine which index is -// given as first argument. -// See effect_descriptor_t for details on effect descriptors. -// This function together with EffectQueryNumberEffects() is used to enumerate all -// effects present in the library. The enumeration sequence is: -// EffectQueryNumberEffects(&num_effects); -// for (i = 0; i < num_effects; i++) -// EffectQueryEffect(i,...); -// -// Input/Output: -// index: index of the effect -// pDescriptor: address where to return the effect descriptor. -// -// Output: -// returned value: 0 successful operation. -// -ENODEV library failed to initialize -// -EINVAL invalid pDescriptor or index -// -ENOSYS effect list has changed since last execution of -// EffectQueryNumberEffects() -// -ENOENT no more effect available -// *pDescriptor: updated with the effect descriptor. -// -//////////////////////////////////////////////////////////////////////////////// -typedef int32_t (*effect_QueryEffect_t)(uint32_t index, - effect_descriptor_t *pDescriptor); - -//////////////////////////////////////////////////////////////////////////////// -// -// Function: EffectCreate -// -// Description: Creates an effect engine of the specified type and returns an -// effect control interface on this engine. The function will allocate the -// resources for an instance of the requested effect engine and return -// a handle on the effect control interface. -// -// Input: -// uuid: pointer to the effect uuid. -// sessionId: audio session to which this effect instance will be attached. All effects -// created with the same session ID are connected in series and process the same signal -// stream. Knowing that two effects are part of the same effect chain can help the -// library implement some kind of optimizations. -// ioId: identifies the output or input stream this effect is directed to at audio HAL. -// For future use especially with tunneled HW accelerated effects -// -// Input/Output: -// pInterface: address where to return the effect interface. -// -// Output: -// returned value: 0 successful operation. -// -ENODEV library failed to initialize -// -EINVAL invalid pEffectUuid or pInterface -// -ENOENT no effect with this uuid found -// *pInterface: updated with the effect interface handle. -// -//////////////////////////////////////////////////////////////////////////////// -typedef int32_t (*effect_CreateEffect_t)(effect_uuid_t *uuid, - int32_t sessionId, - int32_t ioId, - effect_interface_t *pInterface); - -//////////////////////////////////////////////////////////////////////////////// -// -// Function: EffectRelease -// -// Description: Releases the effect engine whose handle is given as argument. -// All resources allocated to this particular instance of the effect are -// released. -// -// Input: -// interface: handle on the effect interface to be released. -// -// Output: -// returned value: 0 successful operation. -// -ENODEV library failed to initialize -// -EINVAL invalid interface handle -// -//////////////////////////////////////////////////////////////////////////////// -typedef int32_t (*effect_ReleaseEffect_t)(effect_interface_t interface); - - -#if __cplusplus -} // extern "C" -#endif - - -#endif /*ANDROID_EFFECTAPI_H_*/ |