diff options
Diffstat (limited to 'dom/system/gonk/android_audio/EffectApi.h')
| -rw-r--r-- | dom/system/gonk/android_audio/EffectApi.h | 798 |
1 files changed, 798 insertions, 0 deletions
diff --git a/dom/system/gonk/android_audio/EffectApi.h b/dom/system/gonk/android_audio/EffectApi.h new file mode 100644 index 000000000..729545d0c --- /dev/null +++ b/dom/system/gonk/android_audio/EffectApi.h @@ -0,0 +1,798 @@ +/* + * Copyright (C) 2010 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef ANDROID_EFFECTAPI_H_ +#define ANDROID_EFFECTAPI_H_ + +#include <errno.h> +#include <stdint.h> +#include <sys/types.h> + +#if __cplusplus +extern "C" { +#endif + +///////////////////////////////////////////////// +// Effect control interface +///////////////////////////////////////////////// + +// The effect control interface is exposed by each effect engine implementation. It consists of +// a set of functions controlling the configuration, activation and process of the engine. +// The functions are grouped in a structure of type effect_interface_s: +// struct effect_interface_s { +// effect_process_t process; +// effect_command_t command; +// }; + + +// effect_interface_t: Effect control interface handle. +// The effect_interface_t serves two purposes regarding the implementation of the effect engine: +// - 1 it is the address of a pointer to an effect_interface_s structure where the functions +// of the effect control API for a particular effect are located. +// - 2 it is the address of the context of a particular effect instance. +// A typical implementation in the effect library would define a structure as follows: +// struct effect_module_s { +// const struct effect_interface_s *itfe; +// effect_config_t config; +// effect_context_t context; +// } +// The implementation of EffectCreate() function would then allocate a structure of this +// type and return its address as effect_interface_t +typedef struct effect_interface_s **effect_interface_t; + + +// Effect API version 1.0 +#define EFFECT_API_VERSION 0x0100 // Format 0xMMmm MM: Major version, mm: minor version + +// Maximum length of character strings in structures defines by this API. +#define EFFECT_STRING_LEN_MAX 64 + +// +//--- Effect descriptor structure effect_descriptor_t +// + +// Unique effect ID (can be generated from the following site: +// http://www.itu.int/ITU-T/asn1/uuid.html) +// This format is used for both "type" and "uuid" fields of the effect descriptor structure. +// - When used for effect type and the engine is implementing and effect corresponding to a standard +// OpenSL ES interface, this ID must be the one defined in OpenSLES_IID.h for that interface. +// - When used as uuid, it should be a unique UUID for this particular implementation. +typedef struct effect_uuid_s { + uint32_t timeLow; + uint16_t timeMid; + uint16_t timeHiAndVersion; + uint16_t clockSeq; + uint8_t node[6]; +} effect_uuid_t; + +// NULL UUID definition (matches SL_IID_NULL_) +#define EFFECT_UUID_INITIALIZER { 0xec7178ec, 0xe5e1, 0x4432, 0xa3f4, \ + { 0x46, 0x57, 0xe6, 0x79, 0x52, 0x10 } } +static const effect_uuid_t EFFECT_UUID_NULL_ = EFFECT_UUID_INITIALIZER; +const effect_uuid_t * const EFFECT_UUID_NULL = &EFFECT_UUID_NULL_; +const char * const EFFECT_UUID_NULL_STR = "ec7178ec-e5e1-4432-a3f4-4657e6795210"; + +// The effect descriptor contains necessary information to facilitate the enumeration of the effect +// engines present in a library. +typedef struct effect_descriptor_s { + effect_uuid_t type; // UUID of to the OpenSL ES interface implemented by this effect + effect_uuid_t uuid; // UUID for this particular implementation + uint16_t apiVersion; // Version of the effect API implemented: matches EFFECT_API_VERSION + uint32_t flags; // effect engine capabilities/requirements flags (see below) + uint16_t cpuLoad; // CPU load indication (see below) + uint16_t memoryUsage; // Data Memory usage (see below) + char name[EFFECT_STRING_LEN_MAX]; // human readable effect name + char implementor[EFFECT_STRING_LEN_MAX]; // human readable effect implementor name +} effect_descriptor_t; + +// CPU load and memory usage indication: each effect implementation must provide an indication of +// its CPU and memory usage for the audio effect framework to limit the number of effects +// instantiated at a given time on a given platform. +// The CPU load is expressed in 0.1 MIPS units as estimated on an ARM9E core (ARMv5TE) with 0 WS. +// The memory usage is expressed in KB and includes only dynamically allocated memory + +// Definitions for flags field of effect descriptor. +// +---------------------------+-----------+----------------------------------- +// | description | bits | values +// +---------------------------+-----------+----------------------------------- +// | connection mode | 0..1 | 0 insert: after track process +// | | | 1 auxiliary: connect to track auxiliary +// | | | output and use send level +// | | | 2 replace: replaces track process function; +// | | | must implement SRC, volume and mono to stereo. +// | | | 3 reserved +// +---------------------------+-----------+----------------------------------- +// | insertion preference | 2..4 | 0 none +// | | | 1 first of the chain +// | | | 2 last of the chain +// | | | 3 exclusive (only effect in the insert chain) +// | | | 4..7 reserved +// +---------------------------+-----------+----------------------------------- +// | Volume management | 5..6 | 0 none +// | | | 1 implements volume control +// | | | 2 requires volume indication +// | | | 3 reserved +// +---------------------------+-----------+----------------------------------- +// | Device indication | 7..8 | 0 none +// | | | 1 requires device updates +// | | | 2..3 reserved +// +---------------------------+-----------+----------------------------------- +// | Sample input mode | 9..10 | 0 direct: process() function or EFFECT_CMD_CONFIGURE +// | | | command must specify a buffer descriptor +// | | | 1 provider: process() function uses the +// | | | bufferProvider indicated by the +// | | | EFFECT_CMD_CONFIGURE command to request input. +// | | | buffers. +// | | | 2 both: both input modes are supported +// | | | 3 reserved +// +---------------------------+-----------+----------------------------------- +// | Sample output mode | 11..12 | 0 direct: process() function or EFFECT_CMD_CONFIGURE +// | | | command must specify a buffer descriptor +// | | | 1 provider: process() function uses the +// | | | bufferProvider indicated by the +// | | | EFFECT_CMD_CONFIGURE command to request output +// | | | buffers. +// | | | 2 both: both output modes are supported +// | | | 3 reserved +// +---------------------------+-----------+----------------------------------- +// | Hardware acceleration | 13..15 | 0 No hardware acceleration +// | | | 1 non tunneled hw acceleration: the process() function +// | | | reads the samples, send them to HW accelerated +// | | | effect processor, reads back the processed samples +// | | | and returns them to the output buffer. +// | | | 2 tunneled hw acceleration: the process() function is +// | | | transparent. The effect interface is only used to +// | | | control the effect engine. This mode is relevant for +// | | | global effects actually applied by the audio +// | | | hardware on the output stream. +// +---------------------------+-----------+----------------------------------- +// | Audio Mode indication | 16..17 | 0 none +// | | | 1 requires audio mode updates +// | | | 2..3 reserved +// +---------------------------+-----------+----------------------------------- + +// Insert mode +#define EFFECT_FLAG_TYPE_MASK 0x00000003 +#define EFFECT_FLAG_TYPE_INSERT 0x00000000 +#define EFFECT_FLAG_TYPE_AUXILIARY 0x00000001 +#define EFFECT_FLAG_TYPE_REPLACE 0x00000002 + +// Insert preference +#define EFFECT_FLAG_INSERT_MASK 0x0000001C +#define EFFECT_FLAG_INSERT_ANY 0x00000000 +#define EFFECT_FLAG_INSERT_FIRST 0x00000004 +#define EFFECT_FLAG_INSERT_LAST 0x00000008 +#define EFFECT_FLAG_INSERT_EXCLUSIVE 0x0000000C + + +// Volume control +#define EFFECT_FLAG_VOLUME_MASK 0x00000060 +#define EFFECT_FLAG_VOLUME_CTRL 0x00000020 +#define EFFECT_FLAG_VOLUME_IND 0x00000040 +#define EFFECT_FLAG_VOLUME_NONE 0x00000000 + +// Device indication +#define EFFECT_FLAG_DEVICE_MASK 0x00000180 +#define EFFECT_FLAG_DEVICE_IND 0x00000080 +#define EFFECT_FLAG_DEVICE_NONE 0x00000000 + +// Sample input modes +#define EFFECT_FLAG_INPUT_MASK 0x00000600 +#define EFFECT_FLAG_INPUT_DIRECT 0x00000000 +#define EFFECT_FLAG_INPUT_PROVIDER 0x00000200 +#define EFFECT_FLAG_INPUT_BOTH 0x00000400 + +// Sample output modes +#define EFFECT_FLAG_OUTPUT_MASK 0x00001800 +#define EFFECT_FLAG_OUTPUT_DIRECT 0x00000000 +#define EFFECT_FLAG_OUTPUT_PROVIDER 0x00000800 +#define EFFECT_FLAG_OUTPUT_BOTH 0x00001000 + +// Hardware acceleration mode +#define EFFECT_FLAG_HW_ACC_MASK 0x00006000 +#define EFFECT_FLAG_HW_ACC_SIMPLE 0x00002000 +#define EFFECT_FLAG_HW_ACC_TUNNEL 0x00004000 + +// Audio mode indication +#define EFFECT_FLAG_AUDIO_MODE_MASK 0x00018000 +#define EFFECT_FLAG_AUDIO_MODE_IND 0x00008000 +#define EFFECT_FLAG_AUDIO_MODE_NONE 0x00000000 + +// Forward definition of type audio_buffer_t +typedef struct audio_buffer_s audio_buffer_t; + +//////////////////////////////////////////////////////////////////////////////// +// +// Function: process +// +// Description: Effect process function. Takes input samples as specified +// (count and location) in input buffer descriptor and output processed +// samples as specified in output buffer descriptor. If the buffer descriptor +// is not specified the function must use either the buffer or the +// buffer provider function installed by the EFFECT_CMD_CONFIGURE command. +// The effect framework will call the process() function after the EFFECT_CMD_ENABLE +// command is received and until the EFFECT_CMD_DISABLE is received. When the engine +// receives the EFFECT_CMD_DISABLE command it should turn off the effect gracefully +// and when done indicate that it is OK to stop calling the process() function by +// returning the -ENODATA status. +// +// NOTE: the process() function implementation should be "real-time safe" that is +// it should not perform blocking calls: malloc/free, sleep, read/write/open/close, +// pthread_cond_wait/pthread_mutex_lock... +// +// Input: +// effect_interface_t: handle to the effect interface this function +// is called on. +// inBuffer: buffer descriptor indicating where to read samples to process. +// If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command. +// +// inBuffer: buffer descriptor indicating where to write processed samples. +// If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command. +// +// Output: +// returned value: 0 successful operation +// -ENODATA the engine has finished the disable phase and the framework +// can stop calling process() +// -EINVAL invalid interface handle or +// invalid input/output buffer description +//////////////////////////////////////////////////////////////////////////////// +typedef int32_t (*effect_process_t)(effect_interface_t self, + audio_buffer_t *inBuffer, + audio_buffer_t *outBuffer); + +//////////////////////////////////////////////////////////////////////////////// +// +// Function: command +// +// Description: Send a command and receive a response to/from effect engine. +// +// Input: +// effect_interface_t: handle to the effect interface this function +// is called on. +// cmdCode: command code: the command can be a standardized command defined in +// effect_command_e (see below) or a proprietary command. +// cmdSize: size of command in bytes +// pCmdData: pointer to command data +// pReplyData: pointer to reply data +// +// Input/Output: +// replySize: maximum size of reply data as input +// actual size of reply data as output +// +// Output: +// returned value: 0 successful operation +// -EINVAL invalid interface handle or +// invalid command/reply size or format according to command code +// The return code should be restricted to indicate problems related to the this +// API specification. Status related to the execution of a particular command should be +// indicated as part of the reply field. +// +// *pReplyData updated with command response +// +//////////////////////////////////////////////////////////////////////////////// +typedef int32_t (*effect_command_t)(effect_interface_t self, + uint32_t cmdCode, + uint32_t cmdSize, + void *pCmdData, + uint32_t *replySize, + void *pReplyData); + + +// Effect control interface definition +struct effect_interface_s { + effect_process_t process; + effect_command_t command; +}; + + +// +//--- Standardized command codes for command() function +// +enum effect_command_e { + EFFECT_CMD_INIT, // initialize effect engine + EFFECT_CMD_CONFIGURE, // configure effect engine (see effect_config_t) + EFFECT_CMD_RESET, // reset effect engine + EFFECT_CMD_ENABLE, // enable effect process + EFFECT_CMD_DISABLE, // disable effect process + EFFECT_CMD_SET_PARAM, // set parameter immediately (see effect_param_t) + EFFECT_CMD_SET_PARAM_DEFERRED, // set parameter deferred + EFFECT_CMD_SET_PARAM_COMMIT, // commit previous set parameter deferred + EFFECT_CMD_GET_PARAM, // get parameter + EFFECT_CMD_SET_DEVICE, // set audio device (see audio_device_e) + EFFECT_CMD_SET_VOLUME, // set volume + EFFECT_CMD_SET_AUDIO_MODE, // set the audio mode (normal, ring, ...) + EFFECT_CMD_FIRST_PROPRIETARY = 0x10000 // first proprietary command code +}; + +//================================================================================================== +// command: EFFECT_CMD_INIT +//-------------------------------------------------------------------------------------------------- +// description: +// Initialize effect engine: All configurations return to default +//-------------------------------------------------------------------------------------------------- +// command format: +// size: 0 +// data: N/A +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: sizeof(int) +// data: status +//================================================================================================== +// command: EFFECT_CMD_CONFIGURE +//-------------------------------------------------------------------------------------------------- +// description: +// Apply new audio parameters configurations for input and output buffers +//-------------------------------------------------------------------------------------------------- +// command format: +// size: sizeof(effect_config_t) +// data: effect_config_t +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: sizeof(int) +// data: status +//================================================================================================== +// command: EFFECT_CMD_RESET +//-------------------------------------------------------------------------------------------------- +// description: +// Reset the effect engine. Keep configuration but resets state and buffer content +//-------------------------------------------------------------------------------------------------- +// command format: +// size: 0 +// data: N/A +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: 0 +// data: N/A +//================================================================================================== +// command: EFFECT_CMD_ENABLE +//-------------------------------------------------------------------------------------------------- +// description: +// Enable the process. Called by the framework before the first call to process() +//-------------------------------------------------------------------------------------------------- +// command format: +// size: 0 +// data: N/A +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: sizeof(int) +// data: status +//================================================================================================== +// command: EFFECT_CMD_DISABLE +//-------------------------------------------------------------------------------------------------- +// description: +// Disable the process. Called by the framework after the last call to process() +//-------------------------------------------------------------------------------------------------- +// command format: +// size: 0 +// data: N/A +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: sizeof(int) +// data: status +//================================================================================================== +// command: EFFECT_CMD_SET_PARAM +//-------------------------------------------------------------------------------------------------- +// description: +// Set a parameter and apply it immediately +//-------------------------------------------------------------------------------------------------- +// command format: +// size: sizeof(effect_param_t) + size of param and value +// data: effect_param_t + param + value. See effect_param_t definition below for value offset +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: sizeof(int) +// data: status +//================================================================================================== +// command: EFFECT_CMD_SET_PARAM_DEFERRED +//-------------------------------------------------------------------------------------------------- +// description: +// Set a parameter but apply it only when receiving EFFECT_CMD_SET_PARAM_COMMIT command +//-------------------------------------------------------------------------------------------------- +// command format: +// size: sizeof(effect_param_t) + size of param and value +// data: effect_param_t + param + value. See effect_param_t definition below for value offset +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: 0 +// data: N/A +//================================================================================================== +// command: EFFECT_CMD_SET_PARAM_COMMIT +//-------------------------------------------------------------------------------------------------- +// description: +// Apply all previously received EFFECT_CMD_SET_PARAM_DEFERRED commands +//-------------------------------------------------------------------------------------------------- +// command format: +// size: 0 +// data: N/A +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: sizeof(int) +// data: status +//================================================================================================== +// command: EFFECT_CMD_GET_PARAM +//-------------------------------------------------------------------------------------------------- +// description: +// Get a parameter value +//-------------------------------------------------------------------------------------------------- +// command format: +// size: sizeof(effect_param_t) + size of param +// data: effect_param_t + param +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: sizeof(effect_param_t) + size of param and value +// data: effect_param_t + param + value. See effect_param_t definition below for value offset +//================================================================================================== +// command: EFFECT_CMD_SET_DEVICE +//-------------------------------------------------------------------------------------------------- +// description: +// Set the rendering device the audio output path is connected to. See audio_device_e for device +// values. +// The effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to receive this +// command when the device changes +//-------------------------------------------------------------------------------------------------- +// command format: +// size: sizeof(uint32_t) +// data: audio_device_e +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: 0 +// data: N/A +//================================================================================================== +// command: EFFECT_CMD_SET_VOLUME +//-------------------------------------------------------------------------------------------------- +// description: +// Set and get volume. Used by audio framework to delegate volume control to effect engine. +// The effect implementation must set EFFECT_FLAG_VOLUME_IND or EFFECT_FLAG_VOLUME_CTRL flag in +// its descriptor to receive this command before every call to process() function +// If EFFECT_FLAG_VOLUME_CTRL flag is set in the effect descriptor, the effect engine must return +// the volume that should be applied before the effect is processed. The overall volume (the volume +// actually applied by the effect engine multiplied by the returned value) should match the value +// indicated in the command. +//-------------------------------------------------------------------------------------------------- +// command format: +// size: n * sizeof(uint32_t) +// data: volume for each channel defined in effect_config_t for output buffer expressed in +// 8.24 fixed point format +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: n * sizeof(uint32_t) / 0 +// data: - if EFFECT_FLAG_VOLUME_CTRL is set in effect descriptor: +// volume for each channel defined in effect_config_t for output buffer expressed in +// 8.24 fixed point format +// - if EFFECT_FLAG_VOLUME_CTRL is not set in effect descriptor: +// N/A +// It is legal to receive a null pointer as pReplyData in which case the effect framework has +// delegated volume control to another effect +//================================================================================================== +// command: EFFECT_CMD_SET_AUDIO_MODE +//-------------------------------------------------------------------------------------------------- +// description: +// Set the audio mode. The effect implementation must set EFFECT_FLAG_AUDIO_MODE_IND flag in its +// descriptor to receive this command when the audio mode changes. +//-------------------------------------------------------------------------------------------------- +// command format: +// size: sizeof(uint32_t) +// data: audio_mode_e +//-------------------------------------------------------------------------------------------------- +// reply format: +// size: 0 +// data: N/A +//================================================================================================== +// command: EFFECT_CMD_FIRST_PROPRIETARY +//-------------------------------------------------------------------------------------------------- +// description: +// All proprietary effect commands must use command codes above this value. The size and format of +// command and response fields is free in this case +//================================================================================================== + + +// Audio buffer descriptor used by process(), bufferProvider() functions and buffer_config_t +// structure. Multi-channel audio is always interleaved. The channel order is from LSB to MSB with +// regard to the channel mask definition in audio_channels_e e.g : +// Stereo: left, right +// 5 point 1: front left, front right, front center, low frequency, back left, back right +// The buffer size is expressed in frame count, a frame being composed of samples for all +// channels at a given time. Frame size for unspecified format (AUDIO_FORMAT_OTHER) is 8 bit by +// definition +struct audio_buffer_s { + size_t frameCount; // number of frames in buffer + union { + void* raw; // raw pointer to start of buffer + int32_t* s32; // pointer to signed 32 bit data at start of buffer + int16_t* s16; // pointer to signed 16 bit data at start of buffer + uint8_t* u8; // pointer to unsigned 8 bit data at start of buffer + }; +}; + +// The buffer_provider_s structure contains functions that can be used +// by the effect engine process() function to query and release input +// or output audio buffer. +// The getBuffer() function is called to retrieve a buffer where data +// should read from or written to by process() function. +// The releaseBuffer() function MUST be called when the buffer retrieved +// with getBuffer() is not needed anymore. +// The process function should use the buffer provider mechanism to retrieve +// input or output buffer if the inBuffer or outBuffer passed as argument is NULL +// and the buffer configuration (buffer_config_t) given by the EFFECT_CMD_CONFIGURE +// command did not specify an audio buffer. + +typedef int32_t (* buffer_function_t)(void *cookie, audio_buffer_t *buffer); + +typedef struct buffer_provider_s { + buffer_function_t getBuffer; // retrieve next buffer + buffer_function_t releaseBuffer; // release used buffer + void *cookie; // for use by client of buffer provider functions +} buffer_provider_t; + + +// The buffer_config_s structure specifies the input or output audio format +// to be used by the effect engine. It is part of the effect_config_t +// structure that defines both input and output buffer configurations and is +// passed by the EFFECT_CMD_CONFIGURE command. +typedef struct buffer_config_s { + audio_buffer_t buffer; // buffer for use by process() function if not passed explicitly + uint32_t samplingRate; // sampling rate + uint32_t channels; // channel mask (see audio_channels_e) + buffer_provider_t bufferProvider; // buffer provider + uint8_t format; // Audio format (see audio_format_e) + uint8_t accessMode; // read/write or accumulate in buffer (effect_buffer_access_e) + uint16_t mask; // indicates which of the above fields is valid +} buffer_config_t; + +// Sample format +enum audio_format_e { + SAMPLE_FORMAT_PCM_S15, // PCM signed 16 bits + SAMPLE_FORMAT_PCM_U8, // PCM unsigned 8 bits + SAMPLE_FORMAT_PCM_S7_24, // PCM signed 7.24 fixed point representation + SAMPLE_FORMAT_OTHER // other format (e.g. compressed) +}; + +// Channel mask +enum audio_channels_e { + CHANNEL_FRONT_LEFT = 0x1, // front left channel + CHANNEL_FRONT_RIGHT = 0x2, // front right channel + CHANNEL_FRONT_CENTER = 0x4, // front center channel + CHANNEL_LOW_FREQUENCY = 0x8, // low frequency channel + CHANNEL_BACK_LEFT = 0x10, // back left channel + CHANNEL_BACK_RIGHT = 0x20, // back right channel + CHANNEL_FRONT_LEFT_OF_CENTER = 0x40, // front left of center channel + CHANNEL_FRONT_RIGHT_OF_CENTER = 0x80, // front right of center channel + CHANNEL_BACK_CENTER = 0x100, // back center channel + CHANNEL_MONO = CHANNEL_FRONT_LEFT, + CHANNEL_STEREO = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT), + CHANNEL_QUAD = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | + CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT), + CHANNEL_SURROUND = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | + CHANNEL_FRONT_CENTER | CHANNEL_BACK_CENTER), + CHANNEL_5POINT1 = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | + CHANNEL_FRONT_CENTER | CHANNEL_LOW_FREQUENCY | CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT), + CHANNEL_7POINT1 = (CHANNEL_FRONT_LEFT | CHANNEL_FRONT_RIGHT | + CHANNEL_FRONT_CENTER | CHANNEL_LOW_FREQUENCY | CHANNEL_BACK_LEFT | CHANNEL_BACK_RIGHT | + CHANNEL_FRONT_LEFT_OF_CENTER | CHANNEL_FRONT_RIGHT_OF_CENTER), +}; + +// Render device +enum audio_device_e { + DEVICE_EARPIECE = 0x1, // earpiece + DEVICE_SPEAKER = 0x2, // speaker + DEVICE_WIRED_HEADSET = 0x4, // wired headset, with microphone + DEVICE_WIRED_HEADPHONE = 0x8, // wired headphone, without microphone + DEVICE_BLUETOOTH_SCO = 0x10, // generic bluetooth SCO + DEVICE_BLUETOOTH_SCO_HEADSET = 0x20, // bluetooth SCO headset + DEVICE_BLUETOOTH_SCO_CARKIT = 0x40, // bluetooth SCO car kit + DEVICE_BLUETOOTH_A2DP = 0x80, // generic bluetooth A2DP + DEVICE_BLUETOOTH_A2DP_HEADPHONES = 0x100, // bluetooth A2DP headphones + DEVICE_BLUETOOTH_A2DP_SPEAKER = 0x200, // bluetooth A2DP speakers + DEVICE_AUX_DIGITAL = 0x400, // digital output + DEVICE_EXTERNAL_SPEAKER = 0x800 // external speaker (stereo and High quality) +}; + +#if ANDROID_VERSION < 17 +// Audio mode +enum audio_mode_e { + AUDIO_MODE_NORMAL, // device idle + AUDIO_MODE_RINGTONE, // device ringing + AUDIO_MODE_IN_CALL // audio call connected (VoIP or telephony) +}; +#endif + +// Values for "accessMode" field of buffer_config_t: +// overwrite, read only, accumulate (read/modify/write) +enum effect_buffer_access_e { + EFFECT_BUFFER_ACCESS_WRITE, + EFFECT_BUFFER_ACCESS_READ, + EFFECT_BUFFER_ACCESS_ACCUMULATE + +}; + +// Values for bit field "mask" in buffer_config_t. If a bit is set, the corresponding field +// in buffer_config_t must be taken into account when executing the EFFECT_CMD_CONFIGURE command +#define EFFECT_CONFIG_BUFFER 0x0001 // buffer field must be taken into account +#define EFFECT_CONFIG_SMP_RATE 0x0002 // samplingRate field must be taken into account +#define EFFECT_CONFIG_CHANNELS 0x0004 // channels field must be taken into account +#define EFFECT_CONFIG_FORMAT 0x0008 // format field must be taken into account +#define EFFECT_CONFIG_ACC_MODE 0x0010 // accessMode field must be taken into account +#define EFFECT_CONFIG_PROVIDER 0x0020 // bufferProvider field must be taken into account +#define EFFECT_CONFIG_ALL (EFFECT_CONFIG_BUFFER | EFFECT_CONFIG_SMP_RATE | \ + EFFECT_CONFIG_CHANNELS | EFFECT_CONFIG_FORMAT | \ + EFFECT_CONFIG_ACC_MODE | EFFECT_CONFIG_PROVIDER) + + +// effect_config_s structure describes the format of the pCmdData argument of EFFECT_CMD_CONFIGURE +// command to configure audio parameters and buffers for effect engine input and output. +typedef struct effect_config_s { + buffer_config_t inputCfg; + buffer_config_t outputCfg;; +} effect_config_t; + + +// effect_param_s structure describes the format of the pCmdData argument of EFFECT_CMD_SET_PARAM +// command and pCmdData and pReplyData of EFFECT_CMD_GET_PARAM command. +// psize and vsize represent the actual size of parameter and value. +// +// NOTE: the start of value field inside the data field is always on a 32 bit boundary: +// +// +-----------+ +// | status | sizeof(int) +// +-----------+ +// | psize | sizeof(int) +// +-----------+ +// | vsize | sizeof(int) +// +-----------+ +// | | | | +// ~ parameter ~ > psize | +// | | | > ((psize - 1)/sizeof(int) + 1) * sizeof(int) +// +-----------+ | +// | padding | | +// +-----------+ +// | | | +// ~ value ~ > vsize +// | | | +// +-----------+ + +typedef struct effect_param_s { + int32_t status; // Transaction status (unused for command, used for reply) + uint32_t psize; // Parameter size + uint32_t vsize; // Value size + char data[]; // Start of Parameter + Value data +} effect_param_t; + + +///////////////////////////////////////////////// +// Effect library interface +///////////////////////////////////////////////// + +// An effect library is required to implement and expose the following functions +// to enable effect enumeration and instantiation. The name of these functions must be as +// specified here as the effect framework will get the function address with dlsym(): +// +// - effect_QueryNumberEffects_t EffectQueryNumberEffects; +// - effect_QueryEffect_t EffectQueryEffect; +// - effect_CreateEffect_t EffectCreate; +// - effect_ReleaseEffect_t EffectRelease; + + +//////////////////////////////////////////////////////////////////////////////// +// +// Function: EffectQueryNumberEffects +// +// Description: Returns the number of different effects exposed by the +// library. Each effect must have a unique effect uuid (see +// effect_descriptor_t). This function together with EffectQueryEffect() +// is used to enumerate all effects present in the library. +// +// Input/Output: +// pNumEffects: address where the number of effects should be returned. +// +// Output: +// returned value: 0 successful operation. +// -ENODEV library failed to initialize +// -EINVAL invalid pNumEffects +// *pNumEffects: updated with number of effects in library +// +//////////////////////////////////////////////////////////////////////////////// +typedef int32_t (*effect_QueryNumberEffects_t)(uint32_t *pNumEffects); + +//////////////////////////////////////////////////////////////////////////////// +// +// Function: EffectQueryEffect +// +// Description: Returns the descriptor of the effect engine which index is +// given as first argument. +// See effect_descriptor_t for details on effect descriptors. +// This function together with EffectQueryNumberEffects() is used to enumerate all +// effects present in the library. The enumeration sequence is: +// EffectQueryNumberEffects(&num_effects); +// for (i = 0; i < num_effects; i++) +// EffectQueryEffect(i,...); +// +// Input/Output: +// index: index of the effect +// pDescriptor: address where to return the effect descriptor. +// +// Output: +// returned value: 0 successful operation. +// -ENODEV library failed to initialize +// -EINVAL invalid pDescriptor or index +// -ENOSYS effect list has changed since last execution of +// EffectQueryNumberEffects() +// -ENOENT no more effect available +// *pDescriptor: updated with the effect descriptor. +// +//////////////////////////////////////////////////////////////////////////////// +typedef int32_t (*effect_QueryEffect_t)(uint32_t index, + effect_descriptor_t *pDescriptor); + +//////////////////////////////////////////////////////////////////////////////// +// +// Function: EffectCreate +// +// Description: Creates an effect engine of the specified type and returns an +// effect control interface on this engine. The function will allocate the +// resources for an instance of the requested effect engine and return +// a handle on the effect control interface. +// +// Input: +// uuid: pointer to the effect uuid. +// sessionId: audio session to which this effect instance will be attached. All effects +// created with the same session ID are connected in series and process the same signal +// stream. Knowing that two effects are part of the same effect chain can help the +// library implement some kind of optimizations. +// ioId: identifies the output or input stream this effect is directed to at audio HAL. +// For future use especially with tunneled HW accelerated effects +// +// Input/Output: +// pInterface: address where to return the effect interface. +// +// Output: +// returned value: 0 successful operation. +// -ENODEV library failed to initialize +// -EINVAL invalid pEffectUuid or pInterface +// -ENOENT no effect with this uuid found +// *pInterface: updated with the effect interface handle. +// +//////////////////////////////////////////////////////////////////////////////// +typedef int32_t (*effect_CreateEffect_t)(effect_uuid_t *uuid, + int32_t sessionId, + int32_t ioId, + effect_interface_t *pInterface); + +//////////////////////////////////////////////////////////////////////////////// +// +// Function: EffectRelease +// +// Description: Releases the effect engine whose handle is given as argument. +// All resources allocated to this particular instance of the effect are +// released. +// +// Input: +// interface: handle on the effect interface to be released. +// +// Output: +// returned value: 0 successful operation. +// -ENODEV library failed to initialize +// -EINVAL invalid interface handle +// +//////////////////////////////////////////////////////////////////////////////// +typedef int32_t (*effect_ReleaseEffect_t)(effect_interface_t interface); + + +#if __cplusplus +} // extern "C" +#endif + + +#endif /*ANDROID_EFFECTAPI_H_*/ |