Add m-esr52 at 52.6.0

1 files changed, 393 insertions, 0 deletions

diff --git a/tools/profiler/lul/LulMainInt.h b/tools/profiler/lul/LulMainInt.h
new file mode 100644
index 000000000..54bd76c88
--- /dev/null
+++ b/tools/profiler/lul/LulMainInt.h
@@ -0,0 +1,393 @@
+/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* vim: set ts=8 sts=2 et sw=2 tw=80: */
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+#ifndef LulMainInt_h
+#define LulMainInt_h
+
+#include "LulPlatformMacros.h"
+#include "LulMain.h" // for TaggedUWord
+
+#include <vector>
+
+#include "mozilla/Assertions.h"
+
+// This file is provides internal interface inside LUL.  If you are an
+// end-user of LUL, do not include it in your code.  The end-user
+// interface is in LulMain.h.
+
+
+namespace lul {
+
+using std::vector;
+
+////////////////////////////////////////////////////////////////
+// DW_REG_ constants                                          //
+////////////////////////////////////////////////////////////////
+
+// These are the Dwarf CFI register numbers, as (presumably) defined
+// in the ELF ABI supplements for each architecture.
+
+enum DW_REG_NUMBER {
+  // No real register has this number.  It's convenient to be able to
+  // treat the CFA (Canonical Frame Address) as "just another
+  // register", though.
+  DW_REG_CFA = -1,
+#if defined(LUL_ARCH_arm)
+  // ARM registers
+  DW_REG_ARM_R7  = 7,
+  DW_REG_ARM_R11 = 11,
+  DW_REG_ARM_R12 = 12,
+  DW_REG_ARM_R13 = 13,
+  DW_REG_ARM_R14 = 14,
+  DW_REG_ARM_R15 = 15,
+#elif defined(LUL_ARCH_x64)
+  // Because the X86 (32 bit) and AMD64 (64 bit) summarisers are
+  // combined, a merged set of register constants is needed.
+  DW_REG_INTEL_XBP = 6,
+  DW_REG_INTEL_XSP = 7,
+  DW_REG_INTEL_XIP = 16,
+#elif defined(LUL_ARCH_x86)
+  DW_REG_INTEL_XBP = 5,
+  DW_REG_INTEL_XSP = 4,
+  DW_REG_INTEL_XIP = 8,
+#else
+# error "Unknown arch"
+#endif
+};
+
+
+////////////////////////////////////////////////////////////////
+// PfxExpr                                                    //
+////////////////////////////////////////////////////////////////
+
+enum PfxExprOp {
+  //             meaning of mOperand     effect on stack
+  PX_Start,   // bool start-with-CFA?    start, with CFA on stack, or not
+  PX_End,     // none                    stop; result is at top of stack
+  PX_SImm32,  // int32                   push signed int32
+  PX_DwReg,   // DW_REG_NUMBER           push value of the specified reg
+  PX_Deref,   // none                    pop X ; push *X
+  PX_Add,     // none                    pop X ; pop Y ; push Y + X
+  PX_Sub,     // none                    pop X ; pop Y ; push Y - X
+  PX_And,     // none                    pop X ; pop Y ; push Y & X
+  PX_Or,      // none                    pop X ; pop Y ; push Y | X
+  PX_CmpGES,  // none                    pop X ; pop Y ; push (Y >=s X) ? 1 : 0
+  PX_Shl      // none                    pop X ; pop Y ; push Y << X
+};
+
+struct PfxInstr {
+  PfxInstr(PfxExprOp opcode, int32_t operand)
+    : mOpcode(opcode)
+    , mOperand(operand)
+  {}
+  explicit PfxInstr(PfxExprOp opcode)
+    : mOpcode(opcode)
+    , mOperand(0)
+  {}
+  bool operator==(const PfxInstr& other) {
+    return mOpcode == other.mOpcode && mOperand == other.mOperand;
+  }
+  PfxExprOp mOpcode;
+  int32_t   mOperand;
+};
+
+static_assert(sizeof(PfxInstr) <= 8, "PfxInstr size changed unexpectedly");
+
+// Evaluate the prefix expression whose PfxInstrs start at aPfxInstrs[start].
+// In the case of any mishap (stack over/underflow, running off the end of
+// the instruction vector, obviously malformed sequences),
+// return an invalid TaggedUWord.
+// RUNS IN NO-MALLOC CONTEXT
+TaggedUWord EvaluatePfxExpr(int32_t start,
+                            const UnwindRegs* aOldRegs,
+                            TaggedUWord aCFA, const StackImage* aStackImg,
+                            const vector<PfxInstr>& aPfxInstrs);
+
+
+////////////////////////////////////////////////////////////////
+// LExpr                                                      //
+////////////////////////////////////////////////////////////////
+
+// An expression -- very primitive.  Denotes either "register +
+// offset", a dereferenced version of the same, or a reference to a
+// prefix expression stored elsewhere.  So as to allow convenient
+// handling of Dwarf-derived unwind info, the register may also denote
+// the CFA.  A large number of these need to be stored, so we ensure
+// it fits into 8 bytes.  See comment below on RuleSet to see how
+// expressions fit into the bigger picture.
+
+enum LExprHow {
+  UNKNOWN=0, // This LExpr denotes no value.
+  NODEREF,   // Value is  (mReg + mOffset).
+  DEREF,     // Value is *(mReg + mOffset).
+  PFXEXPR    // Value is EvaluatePfxExpr(secMap->mPfxInstrs[mOffset])
+};
+
+inline static const char* NameOf_LExprHow(LExprHow how) {
+  switch (how) {
+    case UNKNOWN: return "UNKNOWN";
+    case NODEREF: return "NODEREF";
+    case DEREF:   return "DEREF";
+    case PFXEXPR: return "PFXEXPR";
+    default:      return "LExpr-??";
+  }
+}
+
+
+struct LExpr {
+  // Denotes an expression with no value.
+  LExpr()
+    : mHow(UNKNOWN)
+    , mReg(0)
+    , mOffset(0)
+  {}
+
+  // Denotes any expressible expression.
+  LExpr(LExprHow how, int16_t reg, int32_t offset)
+    : mHow(how)
+    , mReg(reg)
+    , mOffset(offset)
+  {
+    switch (how) {
+      case UNKNOWN: MOZ_ASSERT(reg == 0 && offset == 0); break;
+      case NODEREF: break;
+      case DEREF:   break;
+      case PFXEXPR: MOZ_ASSERT(reg == 0 && offset >= 0); break;
+      default:      MOZ_ASSERT(0, "LExpr::LExpr: invalid how");
+    }
+  }
+
+  // Change the offset for an expression that references memory.
+  LExpr add_delta(long delta)
+  {
+    MOZ_ASSERT(mHow == NODEREF);
+    // If this is a non-debug build and the above assertion would have
+    // failed, at least return LExpr() so that the machinery that uses
+    // the resulting expression fails in a repeatable way.
+    return (mHow == NODEREF) ? LExpr(mHow, mReg, mOffset+delta)
+                             : LExpr(); // Gone bad
+  }
+
+  // Dereference an expression that denotes a memory address.
+  LExpr deref()
+  {
+    MOZ_ASSERT(mHow == NODEREF);
+    // Same rationale as for add_delta().
+    return (mHow == NODEREF) ? LExpr(DEREF, mReg, mOffset)
+                             : LExpr(); // Gone bad
+  }
+
+  // Print a rule for recovery of |aNewReg| whose recovered value
+  // is this LExpr.
+  string ShowRule(const char* aNewReg) const;
+
+  // Evaluate this expression, producing a TaggedUWord.  |aOldRegs|
+  // holds register values that may be referred to by the expression.
+  // |aCFA| holds the CFA value, if any, that applies.  |aStackImg|
+  // contains a chuck of stack that will be consulted if the expression
+  // references memory.  |aPfxInstrs| holds the vector of PfxInstrs
+  // that will be consulted if this is a PFXEXPR.
+  // RUNS IN NO-MALLOC CONTEXT
+  TaggedUWord EvaluateExpr(const UnwindRegs* aOldRegs,
+                           TaggedUWord aCFA, const StackImage* aStackImg,
+                           const vector<PfxInstr>* aPfxInstrs) const;
+
+  // Representation of expressions.  If |mReg| is DW_REG_CFA (-1) then
+  // it denotes the CFA.  All other allowed values for |mReg| are
+  // nonnegative and are DW_REG_ values.
+  LExprHow mHow:8;
+  int16_t  mReg;    // A DW_REG_ value
+  int32_t  mOffset; // 32-bit signed offset should be more than enough.
+};
+
+static_assert(sizeof(LExpr) <= 8, "LExpr size changed unexpectedly");
+
+
+////////////////////////////////////////////////////////////////
+// RuleSet                                                    //
+////////////////////////////////////////////////////////////////
+
+// This is platform-dependent.  For some address range, describes how
+// to recover the CFA and then how to recover the registers for the
+// previous frame.
+//
+// The set of LExprs contained in a given RuleSet describe a DAG which
+// says how to compute the caller's registers ("new registers") from
+// the callee's registers ("old registers").  The DAG can contain a
+// single internal node, which is the value of the CFA for the callee.
+// It would be possible to construct a DAG that omits the CFA, but
+// including it makes the summarisers simpler, and the Dwarf CFI spec
+// has the CFA as a central concept.
+//
+// For this to make sense, |mCfaExpr| can't have
+// |mReg| == DW_REG_CFA since we have no previous value for the CFA.
+// All of the other |Expr| fields can -- and usually do -- specify
+// |mReg| == DW_REG_CFA.
+//
+// With that in place, the unwind algorithm proceeds as follows.
+//
+// (0) Initially: we have values for the old registers, and a memory
+//     image.
+//
+// (1) Compute the CFA by evaluating |mCfaExpr|.  Add the computed
+//     value to the set of "old registers".
+//
+// (2) Compute values for the registers by evaluating all of the other
+//     |Expr| fields in the RuleSet.  These can depend on both the old
+//     register values and the just-computed CFA.
+//
+// If we are unwinding without computing a CFA, perhaps because the
+// RuleSets are derived from EXIDX instead of Dwarf, then
+// |mCfaExpr.mHow| will be LExpr::UNKNOWN, so the computed value will
+// be invalid -- that is, TaggedUWord() -- and so any attempt to use
+// that will result in the same value.  But that's OK because the
+// RuleSet would make no sense if depended on the CFA but specified no
+// way to compute it.
+//
+// A RuleSet is not allowed to cover zero address range.  Having zero
+// length would break binary searching in SecMaps and PriMaps.
+
+class RuleSet {
+public:
+  RuleSet();
+  void   Print(void(*aLog)(const char*)) const;
+
+  // Find the LExpr* for a given DW_REG_ value in this class.
+  LExpr* ExprForRegno(DW_REG_NUMBER aRegno);
+
+  uintptr_t mAddr;
+  uintptr_t mLen;
+  // How to compute the CFA.
+  LExpr  mCfaExpr;
+  // How to compute caller register values.  These may reference the
+  // value defined by |mCfaExpr|.
+#if defined(LUL_ARCH_x64) || defined(LUL_ARCH_x86)
+  LExpr  mXipExpr; // return address
+  LExpr  mXspExpr;
+  LExpr  mXbpExpr;
+#elif defined(LUL_ARCH_arm)
+  LExpr  mR15expr; // return address
+  LExpr  mR14expr;
+  LExpr  mR13expr;
+  LExpr  mR12expr;
+  LExpr  mR11expr;
+  LExpr  mR7expr;
+#else
+#   error "Unknown arch"
+#endif
+};
+
+// Returns |true| for Dwarf register numbers which are members
+// of the set of registers that LUL unwinds on this target.
+static inline bool registerIsTracked(DW_REG_NUMBER reg) {
+  switch (reg) {
+#   if defined(LUL_ARCH_x64) || defined(LUL_ARCH_x86)
+    case DW_REG_INTEL_XBP: case DW_REG_INTEL_XSP: case DW_REG_INTEL_XIP:
+      return true;
+#   elif defined(LUL_ARCH_arm)
+    case DW_REG_ARM_R7:  case DW_REG_ARM_R11: case DW_REG_ARM_R12:
+    case DW_REG_ARM_R13: case DW_REG_ARM_R14: case DW_REG_ARM_R15:
+      return true;
+#   else
+#     error "Unknown arch"
+#   endif
+    default:
+      return false;
+  }
+}
+
+
+////////////////////////////////////////////////////////////////
+// SecMap                                                     //
+////////////////////////////////////////////////////////////////
+
+// A SecMap may have zero address range, temporarily, whilst RuleSets
+// are being added to it.  But adding a zero-range SecMap to a PriMap
+// will make it impossible to maintain the total order of the PriMap
+// entries, and so that can't be allowed to happen.
+
+class SecMap {
+public:
+  // These summarise the contained mRuleSets, in that they give
+  // exactly the lowest and highest addresses that any of the entries
+  // in this SecMap cover.  Hence invariants:
+  //
+  // mRuleSets is nonempty
+  //    <=> mSummaryMinAddr <= mSummaryMaxAddr
+  //        && mSummaryMinAddr == mRuleSets[0].mAddr
+  //        && mSummaryMaxAddr == mRuleSets[#rulesets-1].mAddr
+  //                              + mRuleSets[#rulesets-1].mLen - 1;
+  //
+  // This requires that no RuleSet has zero length.
+  //
+  // mRuleSets is empty
+  //    <=> mSummaryMinAddr > mSummaryMaxAddr
+  //
+  // This doesn't constrain mSummaryMinAddr and mSummaryMaxAddr uniquely,
+  // so let's use mSummaryMinAddr == 1 and mSummaryMaxAddr == 0 to denote
+  // this case.
+
+  explicit SecMap(void(*aLog)(const char*));
+  ~SecMap();
+
+  // Binary search mRuleSets to find one that brackets |ia|, or nullptr
+  // if none is found.  It's not allowable to do this until PrepareRuleSets
+  // has been called first.
+  RuleSet* FindRuleSet(uintptr_t ia);
+
+  // Add a RuleSet to the collection.  The rule is copied in.  Calling
+  // this makes the map non-searchable.
+  void AddRuleSet(const RuleSet* rs);
+
+  // Add a PfxInstr to the vector of such instrs, and return the index
+  // in the vector.  Calling this makes the map non-searchable.
+  uint32_t AddPfxInstr(PfxInstr pfxi);
+
+  // Returns the entire vector of PfxInstrs.
+  const vector<PfxInstr>* GetPfxInstrs() { return &mPfxInstrs; }
+
+  // Prepare the map for searching.  Also, remove any rules for code
+  // address ranges which don't fall inside [start, +len).  |len| may
+  // not be zero.
+  void PrepareRuleSets(uintptr_t start, size_t len);
+
+  bool IsEmpty();
+
+  size_t Size() { return mRuleSets.size(); }
+
+  // The min and max addresses of the addresses in the contained
+  // RuleSets.  See comment above for invariants.
+  uintptr_t mSummaryMinAddr;
+  uintptr_t mSummaryMaxAddr;
+
+private:
+  // False whilst adding entries; true once it is safe to call FindRuleSet.
+  // Transition (false->true) is caused by calling PrepareRuleSets().
+  bool mUsable;
+
+  // A vector of RuleSets, sorted, nonoverlapping (post Prepare()).
+  vector<RuleSet> mRuleSets;
+
+  // A vector of PfxInstrs, which are referred to by the RuleSets.
+  // These are provided as a representation of Dwarf expressions
+  // (DW_CFA_val_expression, DW_CFA_expression, DW_CFA_def_cfa_expression),
+  // are relatively expensive to evaluate, and and are therefore
+  // expected to be used only occasionally.
+  //
+  // The vector holds a bunch of separate PfxInstr programs, each one
+  // starting with a PX_Start and terminated by a PX_End, all
+  // concatenated together.  When a RuleSet can't recover a value
+  // using a self-contained LExpr, it uses a PFXEXPR whose mOffset is
+  // the index in this vector of start of the necessary PfxInstr program.
+  vector<PfxInstr> mPfxInstrs;
+
+  // A logging sink, for debugging.
+  void (*mLog)(const char*);
+};
+
+} // namespace lul
+
+#endif // ndef LulMainInt_h