Add m-esr52 at 52.6.0

1 files changed, 234 insertions, 0 deletions

diff --git a/testing/web-platform/tests/server-side.md b/testing/web-platform/tests/server-side.md
new file mode 100644
index 000000000..46a9e8367
--- /dev/null
+++ b/testing/web-platform/tests/server-side.md
@@ -0,0 +1,234 @@
+# Writing Complex Tests #
+
+For many tests, writing one or more static HTML files is
+sufficient. However there are a large class of tests for which this
+approach is insufficient, including:
+
+* Tests that require cross-domain access
+
+* Tests that depend on setting specific headers or status codes
+
+* Tests that need to inspect the browser sent request
+
+* Tests that require state to be stored on the server
+
+* Tests that require precise timing of the response.
+
+To make writing such tests possible, we are using a number of
+server-side components designed to make it easy to manipulate the
+precise details of the response:
+
+* *wptserve*, a custom python HTTP server.
+
+* *pywebsocket*, an existing websockets server
+
+This document will concentrate on the features of wptserve available
+to test authors.
+
+## Introduction to wptserve ##
+
+wptserve is a python-based web server. By default it serves static
+files in the testsuite. For more sophisticated requirements, several
+mechanisms are available to take control of the response. These are
+outlined below.
+
+## Pipes ##
+
+Suitable for:
+
+ * Cross domain requests
+ * Adding headers or status codes to static files
+ * Controlling the sending of static file bodies
+
+Pipes are designed to allow simple manipulation of the way that
+static files are sent without requiring any custom code. They are also
+useful for cross-origin tests because they can be used to activate a
+substitution mechanism which can fill in details of ports and server
+names in the setup on which the tests are being run.
+
+Pipes are indicated by adding a query string to a request for a static
+resource, with the parameter name `pipe`. The value of the query
+should be a `|` serperated list of pipe functions. For example to
+return a `.html` file with the status code 410 and a Content-Type of
+text/plain, one might use:
+
+    /resources/example.html?pipe=status(410)|header(Content-Type,text/plain)
+
+There are a selection of pipe functions provided with wptserve and
+more may be added if there are good use cases.
+
+### sub ###
+
+Used to subsitute variables from the server environment, or from the
+request into the response. A typical use case is for testing
+cross-domain since the exact domain name and ports of the servers are
+generally unknown.
+
+Substitutions are marked in a file using a block delimited by `{{`
+and `}}`. Inside the block the following variables are avalible:
+
+* `{{host}}` - the host name of the server exclusing any subdomain part.
+* `{{domains[]}}` - the domain name of a particular subdomain
+    e.g. `{{domains[www]}}` for the `www` subdomain.
+* `{{ports[][]}}` - The port number of servers, by protocol
+    e.g. `{{ports[http][1]}}` for the second (i.e. non-default) http
+  server.
+* `{{headers[]}}` - The HTTP headers in the request
+    e.g. `{{headers[X-Test]}}` for a hypothetical `X-Test` header.
+* `{{GET[]}}` - The query parameters for the request
+    e.g. `{{GET[id]}}` for an id parameter sent with the request.
+
+So, for example, to write a javascript file called `xhr.js` that does a
+cross domain XHR test to a different subdomain and port, one would
+write in the file:
+
+    var server_url = "http://{{domains[www]}}:{{ports[http][1]}}/path/to/resource";
+    //Create the actual XHR and so on
+
+The file would then be included as:
+
+    <script src="xhr.js?pipe=sub"></script>
+
+### status ###
+
+Used to set the HTTP status of the response, for example:
+
+    example.js?pipe=status(410)
+
+### headers ###
+
+Used to add or replace http headers in the response. Takes two or
+three arguments; the header name, the header value and whether to
+append the header rather than replace an existing header (default:
+False). So, for example, a request for:
+
+    example.html?pipe=header(Content-Type,text/plain)
+
+causes example.html to be returned with a text/plain content type
+whereas:
+
+    example.html?pipe=header(Content-Type,text/plain,True)
+
+Will cause example.html to be returned with both text/html and
+text/plain content-type headers.
+
+### slice ###
+
+Used to send only part of a response body. Takes the start and,
+optionally, end bytes as arguments, although either can be null to
+indicate the start or end of the file, respectively. So for example:
+
+    example.txt?pipe=slice(10,20)
+
+Would result in a response with a body containing 10 bytes of
+example.txt including byte 10 but excluding byte 20.
+
+    example.txt?pipe=slice(10)
+
+Would cause all bytes from byte 10 of example.txt to be sent, but:
+
+    example.txt?pipe=slice(null,20)
+
+Would send the first 20 bytes of example.txt.
+
+### trickle ###
+
+Used to send the body of a response in chunks with delays. Takes a
+single argument that is a microsyntax consisting of colon-separated
+commands. There are three types of commands:
+
+* Bare numbers represent a number of bytes to send
+
+* Numbers prefixed `d` indicate a delay in seconds
+
+* Numbers prefixed `r` must only appear at the end of the command, and
+    indicate that the preceding N items must be repeated until there is
+  no more content to send.
+
+In the absence of a repetition command, the entire remainder of the content is
+sent at once when the command list is exhausted. So for example:
+
+    example.txt?pipe=trickle(d1)
+
+causes a 1s delay before sending the entirety of example.txt.
+
+    example.txt?pipe=trickle(100:d1)
+
+causes 100 bytes of example.txt to be sent, followed by a 1s delay,
+and then the remainder of the file to be sent. On the other hand:
+
+    example.txt?pipe=trickle(100:d1:r2)
+
+Will cause the file to be sent in 100 byte chunks separated by a 1s
+delay until the whole content has been sent.
+
+## asis files ##
+
+Suitable for:
+
+ * Static, HTTP-non-compliant responses
+
+asis files are simply files with the extension `.asis`. They are sent
+byte for byte to the server without adding a HTTP status line,
+headers, or anything else. This makes them suitable for testing
+situations where the precise bytes on the wire are static, and control
+over the timing is unnecessary, but the response does not conform to
+HTTP requirements.
+
+## py files ##
+
+Suitable for:
+
+ * All tests requiring dynamic responses
+ * Tests that need to store server side state.
+
+The most flexible mechanism for writing tests is to use `.py`
+files. These are interpreted as code and are suitable for the same
+kinds of tasks that one might achieve using cgi, PHP or a similar
+technology. Unlike cgi or PHP, the file is not executed directly and
+does not produce output by writing to `stdout`. Instead files must
+contain (at least) a function named `main`, with the signature:
+
+    def main(request, response):
+        pass
+
+Here `request` is a `Request` object that contains details of the
+request, and `response` is a `Response` object that can be used to set
+properties of the response. Full details of these objects is
+provided in the [wptserve documentation](http://wptserve.readthedocs.org/en/latest/).
+
+In many cases tests will not need to work with the `response` object
+directly. Instead they can set the status, headers and body simply by
+returning values from the `main` function. If any value is returned,
+it is interpreted as the response body. If two values are returned
+they are interpreted as headers and body, and three values are
+interpreted as status, headers, body. So, for example:
+
+    def main(request, response):
+        return "TEST"
+
+creates a response with no non-default headers and the body
+`TEST`. Headers can be added as follows:
+
+    def main(request, response):
+        return ([("Content-Type", "text/plain"), ("X-Test", "test")],
+                "TEST")
+
+And a status code as:
+
+    def main(request, response):
+        return (410,
+                [("Content-Type", "text/plain"), ("X-Test", "test")],
+              "TEST")
+
+A custom status string may be returned by using a tuple `code, string`
+in place of the code alone.
+
+At the other end of the scale, some tests require precision over the
+exact bytes sent over the wire and their timing. This can be achieved
+using the `writer` property of the response, which exposes a
+`ResponseWriter` object that allows wither writing specific parts of
+the request or direct access to the underlying socket.
+
+For full documentation on the facilities available in `.py` files, see
+the [wptserve documentation](http://wptserve.readthedocs.org/en/latest/).