Add m-esr52 at 52.6.0

1 files changed, 356 insertions, 0 deletions

diff --git a/security/nss/lib/certhigh/ocspti.h b/security/nss/lib/certhigh/ocspti.h
new file mode 100644
index 000000000..d9297dba6
--- /dev/null
+++ b/security/nss/lib/certhigh/ocspti.h
@@ -0,0 +1,356 @@
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+/*
+ * Private header defining OCSP types.
+ */
+
+#ifndef _OCSPTI_H_
+#define _OCSPTI_H_
+
+#include "ocspt.h"
+
+#include "certt.h"
+#include "plarena.h"
+#include "seccomon.h"
+#include "secoidt.h"
+
+/*
+ * Some notes about naming conventions...
+ *
+ * The public data types all start with "CERTOCSP" (e.g. CERTOCSPRequest).
+ * (Even the public types are opaque, however.  Only their names are
+ * "exported".)
+ *
+ * Internal-only data types drop the "CERT" prefix and use only the
+ * lower-case "ocsp" (e.g. ocspTBSRequest), for brevity sake.
+ *
+ * In either case, the base/suffix of the type name usually matches the
+ * name as defined in the OCSP specification.  The exceptions to this are:
+ *  - When there is overlap between the "OCSP" or "ocsp" prefix and
+ *    the name used in the standard.  That is, you cannot strip off the
+ *    "CERTOCSP" or "ocsp" prefix and necessarily get the name of the
+ *    type as it is defined in the standard; the "real" name will be
+ *    *either* "OCSPSuffix" or just "Suffix".
+ *  - When the name in the standard was a little too generic.  (e.g. The
+ *    standard defines "Request" but we call it a "SingleRequest".)
+ *    In this case a comment above the type definition calls attention
+ *    to the difference.
+ *
+ * The definitions laid out in this header file are intended to follow
+ * the same order as the definitions in the OCSP specification itself.
+ * With the OCSP standard in hand, you should be able to move through
+ * this file and follow along.  To future modifiers of this file: please
+ * try to keep it that way.  The only exceptions are the few cases where
+ * we need to define a type before it is referenced (e.g. enumerations),
+ * whereas in the OCSP specification these are usually defined the other
+ * way around (reference before definition).
+ */
+
+/*
+ * Forward-declarations of internal-only data structures.
+ *
+ * These are in alphabetical order (case-insensitive); please keep it that way!
+ */
+typedef struct ocspBasicOCSPResponseStr ocspBasicOCSPResponse;
+typedef struct ocspCertStatusStr ocspCertStatus;
+typedef struct ocspResponderIDStr ocspResponderID;
+typedef struct ocspResponseBytesStr ocspResponseBytes;
+typedef struct ocspResponseDataStr ocspResponseData;
+typedef struct ocspRevokedInfoStr ocspRevokedInfo;
+typedef struct ocspServiceLocatorStr ocspServiceLocator;
+typedef struct ocspSignatureStr ocspSignature;
+typedef struct ocspSingleRequestStr ocspSingleRequest;
+typedef struct ocspSingleResponseStr ocspSingleResponse;
+typedef struct ocspTBSRequestStr ocspTBSRequest;
+
+/*
+ * An OCSPRequest; this is what is sent (encoded) to an OCSP responder.
+ */
+struct CERTOCSPRequestStr {
+    PLArenaPool *arena; /* local; not part of encoding */
+    ocspTBSRequest *tbsRequest;
+    ocspSignature *optionalSignature;
+};
+
+/*
+ * A TBSRequest; when an OCSPRequest is signed, the encoding of this
+ * is what the signature is actually applied to.  ("TBS" == To Be Signed)
+ * Whether signed or not, however, this structure will be present, and
+ * is the "meat" of the OCSPRequest.
+ *
+ * Note that the "requestorName" field cannot be encoded/decoded in the
+ * same pass as the entire request -- it needs to be handled with a special
+ * call to convert to/from our internal form of a GeneralName.  Thus the
+ * "derRequestorName" field, which is the actual DER-encoded bytes.
+ *
+ * The "extensionHandle" field is used on creation only; it holds
+ * in-progress extensions as they are optionally added to the request.
+ */
+struct ocspTBSRequestStr {
+    SECItem version;                    /* an INTEGER */
+    SECItem *derRequestorName;          /* encoded GeneralName; see above */
+    CERTGeneralNameList *requestorName; /* local; not part of encoding */
+    ocspSingleRequest **requestList;
+    CERTCertExtension **requestExtensions;
+    void *extensionHandle; /* local; not part of encoding */
+};
+
+/*
+ * This is the actual signature information for an OCSPRequest (applied to
+ * the TBSRequest structure) or for a BasicOCSPResponse (applied to a
+ * ResponseData structure).
+ *
+ * Note that the "signature" field itself is a BIT STRING; operations on
+ * it need to keep that in mind, converting the length to bytes as needed
+ * and back again afterward (so that the length is usually expressing bits).
+ *
+ * The "cert" field is the signer's certificate.  In the case of a received
+ * signature, it will be filled in when the signature is verified.  In the
+ * case of a created signature, it is filled in on creation and will be the
+ * cert used to create the signature when the signing-and-encoding occurs,
+ * as well as the cert (and its chain) to fill in derCerts if requested.
+ *
+ * The extra fields cache information about the signature after we have
+ * attempted a verification.  "wasChecked", if true, means the signature
+ * has been checked against the appropriate data and thus that "status"
+ * contains the result of that verification.  If "status" is not SECSuccess,
+ * "failureReason" is a copy of the error code that was set at the time;
+ * presumably it tells why the signature verification failed.
+ */
+struct ocspSignatureStr {
+    SECAlgorithmID signatureAlgorithm;
+    SECItem signature;     /* a BIT STRING */
+    SECItem **derCerts;    /* a SEQUENCE OF Certificate */
+    CERTCertificate *cert; /* local; not part of encoding */
+    PRBool wasChecked;     /* local; not part of encoding */
+    SECStatus status;      /* local; not part of encoding */
+    int failureReason;     /* local; not part of encoding */
+};
+
+/*
+ * An OCSPRequest contains a SEQUENCE OF these, one for each certificate
+ * whose status is being checked.
+ *
+ * Note that in the OCSP specification this is just called "Request",
+ * but since that seemed confusing (vs. an OCSPRequest) and to be more
+ * consistent with the parallel type "SingleResponse", I called it a
+ * "SingleRequest".
+ *
+ * XXX figure out how to get rid of that arena -- there must be a way
+ */
+struct ocspSingleRequestStr {
+    PLArenaPool *arena; /* just a copy of the response arena,
+					 * needed here for extension handling
+					 * routines, on creation only */
+    CERTOCSPCertID *reqCert;
+    CERTCertExtension **singleRequestExtensions;
+};
+
+/*
+ * A CertID is the means of identifying a certificate, used both in requests
+ * and in responses.
+ *
+ * When in a SingleRequest it specifies the certificate to be checked.
+ * When in a SingleResponse it is the cert whose status is being given.
+ */
+struct CERTOCSPCertIDStr {
+    SECAlgorithmID hashAlgorithm;
+    SECItem issuerNameHash;     /* an OCTET STRING */
+    SECItem issuerKeyHash;      /* an OCTET STRING */
+    SECItem serialNumber;       /* an INTEGER */
+    SECItem issuerSHA1NameHash; /* keep other hashes around when */
+    SECItem issuerMD5NameHash;  /* we have them */
+    SECItem issuerMD2NameHash;
+    SECItem issuerSHA1KeyHash; /* keep other hashes around when */
+    SECItem issuerMD5KeyHash;  /* we have them */
+    SECItem issuerMD2KeyHash;
+    PLArenaPool *poolp;
+};
+
+/*
+ * This describes the value of the responseStatus field in an OCSPResponse.
+ * The corresponding ASN.1 definition is:
+ *
+ * OCSPResponseStatus	::=	ENUMERATED {
+ *	successful		(0),	--Response has valid confirmations
+ *	malformedRequest	(1),	--Illegal confirmation request
+ *	internalError		(2),	--Internal error in issuer
+ *	tryLater		(3),	--Try again later
+ *					--(4) is not used
+ *	sigRequired		(5),	--Must sign the request
+ *	unauthorized		(6),	--Request unauthorized
+ * }
+ */
+typedef enum {
+    ocspResponse_min = 0,
+    ocspResponse_successful = 0,
+    ocspResponse_malformedRequest = 1,
+    ocspResponse_internalError = 2,
+    ocspResponse_tryLater = 3,
+    ocspResponse_unused = 4,
+    ocspResponse_sigRequired = 5,
+    ocspResponse_unauthorized = 6,
+    ocspResponse_max = 6 /* Please update max when adding values.
+                          * Remember to also update arrays, e.g.
+                          * "responseStatusNames" in ocspclnt.c
+                          * and potentially other places. */
+} ocspResponseStatus;
+
+/*
+ * An OCSPResponse is what is sent (encoded) by an OCSP responder.
+ *
+ * The field "responseStatus" is the ASN.1 encoded value; the field
+ * "statusValue" is simply that same value translated into our local
+ * type ocspResponseStatus.
+ */
+struct CERTOCSPResponseStr {
+    PLArenaPool *arena;               /* local; not part of encoding */
+    SECItem responseStatus;           /* an ENUMERATED, see above */
+    ocspResponseStatus statusValue;   /* local; not part of encoding */
+    ocspResponseBytes *responseBytes; /* only when status is successful */
+};
+
+/*
+ * A ResponseBytes (despite appearances) is what contains the meat
+ * of a successful response -- but still in encoded form.  The type
+ * given as "responseType" tells you how to decode the string.
+ *
+ * We look at the OID and translate it into our local OID representation
+ * "responseTypeTag", and use that value to tell us how to decode the
+ * actual response itself.  For now the only kind of OCSP response we
+ * know about is a BasicOCSPResponse.  However, the intention in the
+ * OCSP specification is to allow for other response types, so we are
+ * building in that flexibility from the start and thus put a pointer
+ * to that data structure inside of a union.  Whenever OCSP adds more
+ * response types, just add them to the union.
+ */
+struct ocspResponseBytesStr {
+    SECItem responseType;      /* an OBJECT IDENTIFIER */
+    SECOidTag responseTypeTag; /* local; not part of encoding */
+    SECItem response;          /* an OCTET STRING */
+    union {
+        ocspBasicOCSPResponse *basic; /* when type is id-pkix-ocsp-basic */
+    } decodedResponse;                /* local; not part of encoding */
+};
+
+/*
+ * A BasicOCSPResponse -- when the responseType in a ResponseBytes is
+ * id-pkix-ocsp-basic, the "response" OCTET STRING above is the DER
+ * encoding of one of these.
+ *
+ * Note that in the OCSP specification, the signature fields are not
+ * part of a separate sub-structure.  But since they are the same fields
+ * as we define for the signature in a request, it made sense to share
+ * the C data structure here and in some shared code to operate on them.
+ */
+struct ocspBasicOCSPResponseStr {
+    SECItem tbsResponseDataDER;
+    ocspResponseData *tbsResponseData; /* "tbs" == To Be Signed */
+    ocspSignature responseSignature;
+};
+
+/*
+ * A ResponseData is the part of a BasicOCSPResponse that is signed
+ * (after it is DER encoded).  It contains the real details of the response
+ * (a per-certificate status).
+ */
+struct ocspResponseDataStr {
+    SECItem version; /* an INTEGER */
+    SECItem derResponderID;
+    ocspResponderID *responderID; /* local; not part of encoding */
+    SECItem producedAt;           /* a GeneralizedTime */
+    CERTOCSPSingleResponse **responses;
+    CERTCertExtension **responseExtensions;
+};
+
+struct ocspResponderIDStr {
+    CERTOCSPResponderIDType responderIDType; /* local; not part of encoding */
+    union {
+        CERTName name;   /* when ocspResponderID_byName */
+        SECItem keyHash; /* when ocspResponderID_byKey */
+        SECItem other;   /* when ocspResponderID_other */
+    } responderIDValue;
+};
+
+/*
+ * The ResponseData in a BasicOCSPResponse contains a SEQUENCE OF
+ * SingleResponse -- one for each certificate whose status is being supplied.
+ *
+ * XXX figure out how to get rid of that arena -- there must be a way
+ */
+struct CERTOCSPSingleResponseStr {
+    PLArenaPool *arena; /* just a copy of the response arena,
+					 * needed here for extension handling
+					 * routines, on creation only */
+    CERTOCSPCertID *certID;
+    SECItem derCertStatus;
+    ocspCertStatus *certStatus; /* local; not part of encoding */
+    SECItem thisUpdate;         /* a GeneralizedTime */
+    SECItem *nextUpdate;        /* a GeneralizedTime */
+    CERTCertExtension **singleExtensions;
+};
+
+/*
+ * A CertStatus is the actual per-certificate status.  Its ASN.1 definition:
+ *
+ * CertStatus	::=	CHOICE {
+ *	good			[0] IMPLICIT NULL,
+ *	revoked			[1] IMPLICIT RevokedInfo,
+ *	unknown			[2] IMPLICIT UnknownInfo }
+ *
+ * (where for now UnknownInfo is defined to be NULL but in the
+ * future may be replaced with an enumeration).
+ *
+ * Because it is CHOICE, the status value and its associated information
+ * (if any) are actually encoded together.  To represent this same
+ * information internally, we explicitly define a type and save it,
+ * along with the value, into a data structure.
+ */
+
+typedef enum {
+    ocspCertStatus_good,    /* cert is not revoked */
+    ocspCertStatus_revoked, /* cert is revoked */
+    ocspCertStatus_unknown, /* cert was unknown to the responder */
+    ocspCertStatus_other    /* status was not an expected value */
+} ocspCertStatusType;
+
+/*
+ * This is the actual per-certificate status.
+ *
+ * The "goodInfo" and "unknownInfo" items are only place-holders for a NULL.
+ * (Though someday OCSP may replace UnknownInfo with an enumeration that
+ * gives more detailed information.)
+ */
+struct ocspCertStatusStr {
+    ocspCertStatusType certStatusType; /* local; not part of encoding */
+    union {
+        SECItem *goodInfo;            /* when ocspCertStatus_good */
+        ocspRevokedInfo *revokedInfo; /* when ocspCertStatus_revoked */
+        SECItem *unknownInfo;         /* when ocspCertStatus_unknown */
+        SECItem *otherInfo;           /* when ocspCertStatus_other */
+    } certStatusInfo;
+};
+
+/*
+ * A RevokedInfo gives information about a revoked certificate -- when it
+ * was revoked and why.
+ */
+struct ocspRevokedInfoStr {
+    SECItem revocationTime;    /* a GeneralizedTime */
+    SECItem *revocationReason; /* a CRLReason; ignored for now */
+};
+
+/*
+ * ServiceLocator can be included as one of the singleRequestExtensions.
+ * When added, it specifies the (name of the) issuer of the cert being
+ * checked, and optionally the value of the AuthorityInfoAccess extension
+ * if the cert has one.
+ */
+struct ocspServiceLocatorStr {
+    CERTName *issuer;
+    SECItem locator; /* DER encoded authInfoAccess extension from cert */
+};
+
+#endif /* _OCSPTI_H_ */