Issue #1338 - Part 2: Update NSS to 3.48-RTM

1 files changed, 75 insertions, 40 deletions

diff --git a/security/nss/build.sh b/security/nss/build.sh
index 4c6d513cd..7595d76f4 100755
--- a/security/nss/build.sh
+++ b/security/nss/build.sh
@@ -13,14 +13,16 @@
 set -e
 
 cwd=$(cd $(dirname $0); pwd -P)
-source "$cwd"/coreconf/nspr.sh
-source "$cwd"/coreconf/sanitizers.sh
+dist_dir="$cwd/../dist"
+argsfile="$dist_dir/build_args"
+source "$cwd/coreconf/nspr.sh"
+source "$cwd/coreconf/sanitizers.sh"
 GYP=${GYP:-gyp}
 
 # Usage info
 show_help()
 {
-    cat "$cwd"/help.txt
+    cat "$cwd/help.txt"
 }
 
 run_verbose()
@@ -35,6 +37,14 @@ run_verbose()
     exec 3>&-
 }
 
+# The prehistoric bash on Mac doesn't support @Q quoting.
+# The consequences aren't that serious, unless there are odd arrangements of spaces.
+if /usr/bin/env bash -c 'x=1;echo "${x@Q}"' >/dev/null 2>&1; then
+    Q() { echo "${@@Q}"; }
+else
+    Q() { echo "$@"; }
+fi
+
 if [ -n "$CCC" ] && [ -z "$CXX" ]; then
     export CXX="$CCC"
 fi
@@ -44,18 +54,22 @@ build_64=0
 clean=0
 rebuild_gyp=0
 rebuild_nspr=0
+build_nspr_tests=0
+run_nspr_tests=0
+exit_after_nspr=0
 target=Debug
 verbose=0
 fuzz=0
 fuzz_tls=0
 fuzz_oss=0
 no_local_nspr=0
+sslkeylogfile=1
 
 gyp_params=(--depth="$cwd" --generator-output=".")
 ninja_params=()
 
 # Assume that the target architecture is the same as the host by default.
-host_arch=$(python "$cwd"/coreconf/detect_host_arch.py)
+host_arch=$(python "$cwd/coreconf/detect_host_arch.py")
 target_arch=$host_arch
 
 # Assume that MSVC is wanted if this is running on windows.
@@ -65,8 +79,17 @@ if [ "${platform%-*}" = "MINGW32_NT" -o "${platform%-*}" = "MINGW64_NT" ]; then
 fi
 
 # Parse command line arguments.
+all_args=("$@")
 while [ $# -gt 0 ]; do
     case "$1" in
+        --rebuild)
+            if [[ ! -e "$argsfile" ]]; then
+                echo "Unable to rebuild" 1>&2
+                exit 2
+            fi
+            IFS=$'\r\n' GLOBIGNORE='*' command eval  'previous_args=($(<"$argsfile"))'
+            exec /usr/bin/env bash -c "$(Q "$0")"' "$@"' "$0" "${previous_args[@]}"
+            ;;
         -c) clean=1 ;;
         -cc) clean_only=1 ;;
         -v) ninja_params+=(-v); verbose=1 ;;
@@ -94,15 +117,20 @@ while [ $# -gt 0 ]; do
         --sancov=?*) enable_sancov "${1#*=}" ;;
         --emit-llvm) gyp_params+=(-Demit_llvm=1 -Dsign_libs=0) ;;
         --no-zdefs) gyp_params+=(-Dno_zdefs=1) ;;
-        --test) gyp_params+=(-Dtest_build=1) ;;
+        --static) gyp_params+=(-Dstatic_libs=1) ;;
         --ct-verif) gyp_params+=(-Dct_verif=1) ;;
         --nspr) nspr_clean; rebuild_nspr=1 ;;
+        --nspr-test-build) build_nspr_tests=1 ;;
+        --nspr-test-run) run_nspr_tests=1 ;;
+        --nspr-only) exit_after_nspr=1 ;;
         --with-nspr=?*) set_nspr_path "${1#*=}"; no_local_nspr=1 ;;
         --system-nspr) set_nspr_path "/usr/include/nspr/:"; no_local_nspr=1 ;;
         --system-sqlite) gyp_params+=(-Duse_system_sqlite=1) ;;
         --enable-fips) gyp_params+=(-Ddisable_fips=0) ;;
         --enable-libpkix) gyp_params+=(-Ddisable_libpkix=0) ;;
         --mozpkix-only) gyp_params+=(-Dmozpkix_only=1 -Ddisable_tests=1 -Dsign_libs=0) ;;
+        --disable-keylog) sslkeylogfile=0 ;;
+        -D*) gyp_params+=("$1") ;;
         *) show_help; exit 2 ;;
     esac
     shift
@@ -116,9 +144,11 @@ else
     target=Debug
 fi
 
+gyp_params+=(-Denable_sslkeylogfile="$sslkeylogfile")
+
 # Do special setup.
 if [ "$fuzz" = 1 ]; then
-    source "$cwd"/coreconf/fuzz.sh
+    source "$cwd/coreconf/fuzz.sh"
 fi
 nspr_set_flags $sanitizer_flags
 if [ ! -z "$sanitizer_flags" ]; then
@@ -126,20 +156,13 @@ if [ ! -z "$sanitizer_flags" ]; then
 fi
 
 if [ "$msvc" = 1 ]; then
-    source "$cwd"/coreconf/msvc.sh
+    source "$cwd/coreconf/msvc.sh"
 fi
 
-# Setup build paths.
-target_dir="$cwd"/out/$target
-mkdir -p "$target_dir"
-dist_dir="$cwd"/../dist
-dist_dir=$(mkdir -p "$dist_dir"; cd "$dist_dir"; pwd -P)
-gyp_params+=(-Dnss_dist_dir="$dist_dir")
-
 # -c = clean first
 if [ "$clean" = 1 -o "$clean_only" = 1 ]; then
     nspr_clean
-    rm -rf "$cwd"/out
+    rm -rf "$cwd/out"
     rm -rf "$dist_dir"
     # -cc = only clean, don't build
     if [ "$clean_only" = 1 ]; then
@@ -148,6 +171,12 @@ if [ "$clean" = 1 -o "$clean_only" = 1 ]; then
     fi
 fi
 
+# Setup build paths.
+target_dir="$cwd/out/$target"
+mkdir -p "$target_dir"
+dist_dir=$(mkdir -p "$dist_dir"; cd "$dist_dir"; pwd -P)
+gyp_params+=(-Dnss_dist_dir="$dist_dir")
+
 # This saves a canonical representation of arguments that we are passing to gyp
 # or the NSPR build so that we can work out if a rebuild is needed.
 # Caveat: This can fail for arguments that are position-dependent.
@@ -157,66 +186,72 @@ check_config()
     local newconf="$1".new oldconf="$1"
     shift
     mkdir -p $(dirname "$newconf")
-    echo CC="$CC" >"$newconf"
-    echo CCC="$CCC" >>"$newconf"
-    echo CXX="$CXX" >>"$newconf"
-    echo target_arch="$target_arch" >>"$newconf"
-    for i in "$@"; do echo $i; done | sort >>"$newconf"
+    echo CC="$(Q "$CC")" >"$newconf"
+    echo CCC="$(Q "$CCC")" >>"$newconf"
+    echo CXX="$(Q "$CXX")" >>"$newconf"
+    echo target_arch="$(Q "$target_arch")" >>"$newconf"
+    for i in "$@"; do echo "$i"; done | sort >>"$newconf"
 
     # Note: The following diff fails if $oldconf isn't there as well, which
     # happens if we don't have a previous successful build.
     ! diff -q "$newconf" "$oldconf" >/dev/null 2>&1
 }
 
-gyp_config="$cwd"/out/gyp_config
-nspr_config="$cwd"/out/$target/nspr_config
+gyp_config="$cwd/out/gyp_config"
+nspr_config="$cwd/out/$target/nspr_config"
 
 # Now check what needs to be rebuilt.
 # If we don't have a build directory make sure that we rebuild.
 if [ ! -d "$target_dir" ]; then
     rebuild_nspr=1
     rebuild_gyp=1
-elif [ ! -d "$dist_dir"/$target ]; then
+elif [ ! -d "$dist_dir/$target" ]; then
     rebuild_nspr=1
 fi
 
 if check_config "$nspr_config" \
-                 nspr_cflags="$nspr_cflags" \
-                 nspr_cxxflags="$nspr_cxxflags" \
-                 nspr_ldflags="$nspr_ldflags"; then
+                 nspr_cflags="$(Q "$nspr_cflags")" \
+                 nspr_cxxflags="$(Q "$nspr_cxxflags")" \
+                 nspr_ldflags="$(Q "$nspr_ldflags")"; then
     rebuild_nspr=1
 fi
 
-if check_config "$gyp_config" "${gyp_params[@]}"; then
+if check_config "$gyp_config" "$(Q "${gyp_params[@]}")"; then
     rebuild_gyp=1
 fi
 
 # Save the chosen target.
-mkdir -p "$dist_dir"
-echo $target > "$dist_dir"/latest
+echo "$target" > "$dist_dir/latest"
+for i in "${all_args[@]}"; do echo "$i"; done > "$argsfile"
 
 # Build.
 # NSPR.
 if [[ "$rebuild_nspr" = 1 && "$no_local_nspr" = 0 ]]; then
+    nspr_clean
     nspr_build
-    mv -f "$nspr_config".new "$nspr_config"
+    mv -f "$nspr_config.new" "$nspr_config"
+fi
+
+if [ "$exit_after_nspr" = 1 ]; then
+  exit 0
 fi
+
 # gyp.
 if [ "$rebuild_gyp" = 1 ]; then
-    if ! hash ${GYP} 2> /dev/null; then
-        echo "Please install gyp" 1>&2
-        exit 1
+    if ! hash "$GYP" 2> /dev/null; then
+        echo "Building NSS requires an installation of gyp: https://gyp.gsrc.io/" 1>&2
+        exit 3
     fi
     # These extra arguments aren't used in determining whether to rebuild.
-    obj_dir="$dist_dir"/$target
-    gyp_params+=(-Dnss_dist_obj_dir=$obj_dir)
+    obj_dir="$dist_dir/$target"
+    gyp_params+=(-Dnss_dist_obj_dir="$obj_dir")
     if [ "$no_local_nspr" = 0 ]; then
         set_nspr_path "$obj_dir/include/nspr:$obj_dir/lib"
     fi
 
-    run_verbose run_scanbuild ${GYP} -f ninja "${gyp_params[@]}" "$cwd"/nss.gyp
+    run_verbose run_scanbuild ${GYP} -f ninja "${gyp_params[@]}" "$cwd/nss.gyp"
 
-    mv -f "$gyp_config".new "$gyp_config"
+    mv -f "$gyp_config.new" "$gyp_config"
 fi
 
 # ninja.
@@ -225,7 +260,7 @@ if hash ninja-build 2>/dev/null; then
 elif hash ninja 2>/dev/null; then
     ninja=ninja
 else
-    echo "Please install ninja" 1>&2
-    exit 1
+    echo "Building NSS requires an installation of ninja: https://ninja-build.org/" 1>&2
+    exit 3
 fi
-run_scanbuild $ninja -C "$target_dir" "${ninja_params[@]}"
+run_scanbuild "$ninja" -C "$target_dir" "${ninja_params[@]}"