Add m-esr52 at 52.6.0

6 files changed, 1018 insertions, 0 deletions

diff --git a/media/libopus/celt/mips/celt_mipsr1.h b/media/libopus/celt/mips/celt_mipsr1.h
new file mode 100644
index 000000000..e85661a66
--- /dev/null
+++ b/media/libopus/celt/mips/celt_mipsr1.h
@@ -0,0 +1,151 @@
+/* Copyright (c) 2007-2008 CSIRO
+   Copyright (c) 2007-2010 Xiph.Org Foundation
+   Copyright (c) 2008 Gregory Maxwell
+   Written by Jean-Marc Valin and Gregory Maxwell */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef __CELT_MIPSR1_H__
+#define __CELT_MIPSR1_H__
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#define CELT_C
+
+#include "os_support.h"
+#include "mdct.h"
+#include <math.h>
+#include "celt.h"
+#include "pitch.h"
+#include "bands.h"
+#include "modes.h"
+#include "entcode.h"
+#include "quant_bands.h"
+#include "rate.h"
+#include "stack_alloc.h"
+#include "mathops.h"
+#include "float_cast.h"
+#include <stdarg.h>
+#include "celt_lpc.h"
+#include "vq.h"
+
+#define OVERRIDE_comb_filter
+void comb_filter(opus_val32 *y, opus_val32 *x, int T0, int T1, int N,
+      opus_val16 g0, opus_val16 g1, int tapset0, int tapset1,
+      const opus_val16 *window, int overlap, int arch)
+{
+   int i;
+   opus_val32 x0, x1, x2, x3, x4;
+
+   (void)arch;
+
+   /* printf ("%d %d %f %f\n", T0, T1, g0, g1); */
+   opus_val16 g00, g01, g02, g10, g11, g12;
+   static const opus_val16 gains[3][3] = {
+         {QCONST16(0.3066406250f, 15), QCONST16(0.2170410156f, 15), QCONST16(0.1296386719f, 15)},
+         {QCONST16(0.4638671875f, 15), QCONST16(0.2680664062f, 15), QCONST16(0.f, 15)},
+         {QCONST16(0.7998046875f, 15), QCONST16(0.1000976562f, 15), QCONST16(0.f, 15)}};
+
+   if (g0==0 && g1==0)
+   {
+      /* OPT: Happens to work without the OPUS_MOVE(), but only because the current encoder already copies x to y */
+      if (x!=y)
+         OPUS_MOVE(y, x, N);
+      return;
+   }
+
+   g00 = MULT16_16_P15(g0, gains[tapset0][0]);
+   g01 = MULT16_16_P15(g0, gains[tapset0][1]);
+   g02 = MULT16_16_P15(g0, gains[tapset0][2]);
+   g10 = MULT16_16_P15(g1, gains[tapset1][0]);
+   g11 = MULT16_16_P15(g1, gains[tapset1][1]);
+   g12 = MULT16_16_P15(g1, gains[tapset1][2]);
+   x1 = x[-T1+1];
+   x2 = x[-T1  ];
+   x3 = x[-T1-1];
+   x4 = x[-T1-2];
+   /* If the filter didn't change, we don't need the overlap */
+   if (g0==g1 && T0==T1 && tapset0==tapset1)
+      overlap=0;
+
+   for (i=0;i<overlap;i++)
+   {
+      opus_val16 f;
+      opus_val32 res;
+      f = MULT16_16_Q15(window[i],window[i]);
+      x0= x[i-T1+2];
+
+      asm volatile("MULT $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15((Q15ONE-f),g00)), "r" ((int)x[i-T0]));
+
+      asm volatile("MADD $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15((Q15ONE-f),g01)), "r" ((int)ADD32(x[i-T0-1],x[i-T0+1])));
+      asm volatile("MADD $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15((Q15ONE-f),g02)), "r" ((int)ADD32(x[i-T0-2],x[i-T0+2])));
+      asm volatile("MADD $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15(f,g10)), "r" ((int)x2));
+      asm volatile("MADD $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15(f,g11)), "r" ((int)ADD32(x3,x1)));
+      asm volatile("MADD $ac1, %0, %1" : : "r" ((int)MULT16_16_Q15(f,g12)), "r" ((int)ADD32(x4,x0)));
+
+      asm volatile("EXTR.W %0,$ac1, %1" : "=r" (res): "i" (15));
+
+      y[i] = x[i] + res;
+
+      x4=x3;
+      x3=x2;
+      x2=x1;
+      x1=x0;
+   }
+
+   x4 = x[i-T1-2];
+   x3 = x[i-T1-1];
+   x2 = x[i-T1];
+   x1 = x[i-T1+1];
+
+   if (g1==0)
+   {
+      /* OPT: Happens to work without the OPUS_MOVE(), but only because the current encoder already copies x to y */
+      if (x!=y)
+         OPUS_MOVE(y+overlap, x+overlap, N-overlap);
+      return;
+   }
+
+   for (i=overlap;i<N;i++)
+   {
+      opus_val32 res;
+      x0=x[i-T1+2];
+
+      asm volatile("MULT $ac1, %0, %1" : : "r" ((int)g10), "r" ((int)x2));
+
+      asm volatile("MADD $ac1, %0, %1" : : "r" ((int)g11), "r" ((int)ADD32(x3,x1)));
+      asm volatile("MADD $ac1, %0, %1" : : "r" ((int)g12), "r" ((int)ADD32(x4,x0)));
+      asm volatile("EXTR.W %0,$ac1, %1" : "=r" (res): "i" (15));
+      y[i] = x[i] + res;
+      x4=x3;
+      x3=x2;
+      x2=x1;
+      x1=x0;
+   }
+}
+
+#endif /* __CELT_MIPSR1_H__ */
diff --git a/media/libopus/celt/mips/fixed_generic_mipsr1.h b/media/libopus/celt/mips/fixed_generic_mipsr1.h
new file mode 100644
index 000000000..4a05efbf8
--- /dev/null
+++ b/media/libopus/celt/mips/fixed_generic_mipsr1.h
@@ -0,0 +1,126 @@
+/* Copyright (C) 2007-2009 Xiph.Org Foundation
+   Copyright (C) 2003-2008 Jean-Marc Valin
+   Copyright (C) 2007-2008 CSIRO */
+/**
+   @file fixed_generic.h
+   @brief Generic fixed-point operations
+*/
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef CELT_FIXED_GENERIC_MIPSR1_H
+#define CELT_FIXED_GENERIC_MIPSR1_H
+
+#undef MULT16_32_Q15_ADD
+static inline int MULT16_32_Q15_ADD(int a, int b, int c, int d) {
+    int m;
+    asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+    asm volatile("madd $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+    return m;
+}
+
+#undef MULT16_32_Q15_SUB
+static inline int MULT16_32_Q15_SUB(int a, int b, int c, int d) {
+    int m;
+    asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+    asm volatile("msub $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+    return m;
+}
+
+#undef MULT16_16_Q15_ADD
+static inline int MULT16_16_Q15_ADD(int a, int b, int c, int d) {
+    int m;
+    asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+    asm volatile("madd $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+    return m;
+}
+
+#undef MULT16_16_Q15_SUB
+static inline int MULT16_16_Q15_SUB(int a, int b, int c, int d) {
+    int m;
+    asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+    asm volatile("msub $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+    return m;
+}
+
+
+#undef MULT16_32_Q16
+static inline int MULT16_32_Q16(int a, int b)
+{
+    int c;
+    asm volatile("MULT $ac1,%0, %1" : : "r" (a), "r" (b));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (c): "i" (16));
+    return c;
+}
+
+#undef MULT16_32_P16
+static inline int MULT16_32_P16(int a, int b)
+{
+    int c;
+    asm volatile("MULT $ac1, %0, %1" : : "r" (a), "r" (b));
+    asm volatile("EXTR_R.W %0,$ac1, %1" : "=r" (c): "i" (16));
+    return c;
+}
+
+#undef MULT16_32_Q15
+static inline int MULT16_32_Q15(int a, int b)
+{
+    int c;
+    asm volatile("MULT $ac1, %0, %1" : : "r" (a), "r" (b));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (c): "i" (15));
+    return c;
+}
+
+#undef MULT32_32_Q31
+static inline int MULT32_32_Q31(int a, int b)
+{
+    int r;
+    asm volatile("MULT $ac1, %0, %1" : : "r" (a), "r" (b));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (r): "i" (31));
+    return r;
+}
+
+#undef PSHR32
+static inline int PSHR32(int a, int shift)
+{
+    int r;
+    asm volatile ("SHRAV_R.W %0, %1, %2" :"=r" (r): "r" (a), "r" (shift));
+    return r;
+}
+
+#undef MULT16_16_P15
+static inline int MULT16_16_P15(int a, int b)
+{
+    int r;
+    asm volatile ("mul %0, %1, %2" :"=r" (r): "r" (a), "r" (b));
+    asm volatile ("SHRA_R.W %0, %1, %2" : "+r" (r):  "0" (r), "i"(15));
+    return r;
+}
+
+#endif /* CELT_FIXED_GENERIC_MIPSR1_H */
diff --git a/media/libopus/celt/mips/kiss_fft_mipsr1.h b/media/libopus/celt/mips/kiss_fft_mipsr1.h
new file mode 100644
index 000000000..400ca4de9
--- /dev/null
+++ b/media/libopus/celt/mips/kiss_fft_mipsr1.h
@@ -0,0 +1,167 @@
+/*Copyright (c) 2013, Xiph.Org Foundation and contributors.
+
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice,
+       this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright notice,
+       this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.*/
+
+#ifndef KISS_FFT_MIPSR1_H
+#define KISS_FFT_MIPSR1_H
+
+#if !defined(KISS_FFT_GUTS_H)
+#error "This file should only be included from _kiss_fft_guts.h"
+#endif
+
+#ifdef FIXED_POINT
+
+#define S_MUL_ADD(a, b, c, d) (S_MUL(a,b)+S_MUL(c,d))
+#define S_MUL_SUB(a, b, c, d) (S_MUL(a,b)-S_MUL(c,d))
+
+#undef S_MUL_ADD
+static inline int S_MUL_ADD(int a, int b, int c, int d) {
+    int m;
+    asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+    asm volatile("madd $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+    return m;
+}
+
+#undef S_MUL_SUB
+static inline int S_MUL_SUB(int a, int b, int c, int d) {
+    int m;
+    asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a), "r" ((int)b));
+    asm volatile("msub $ac1, %0, %1" : : "r" ((int)c), "r" ((int)d));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m): "i" (15));
+    return m;
+}
+
+#undef C_MUL
+#   define C_MUL(m,a,b) (m=C_MUL_fun(a,b))
+static inline kiss_fft_cpx C_MUL_fun(kiss_fft_cpx a, kiss_twiddle_cpx b) {
+    kiss_fft_cpx m;
+
+    asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a.r), "r" ((int)b.r));
+    asm volatile("msub $ac1, %0, %1" : : "r" ((int)a.i), "r" ((int)b.i));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m.r): "i" (15));
+    asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a.r), "r" ((int)b.i));
+    asm volatile("madd $ac1, %0, %1" : : "r" ((int)a.i), "r" ((int)b.r));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m.i): "i" (15));
+
+    return m;
+}
+#undef C_MULC
+#   define C_MULC(m,a,b) (m=C_MULC_fun(a,b))
+static inline kiss_fft_cpx C_MULC_fun(kiss_fft_cpx a, kiss_twiddle_cpx b) {
+    kiss_fft_cpx m;
+
+    asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a.r), "r" ((int)b.r));
+    asm volatile("madd $ac1, %0, %1" : : "r" ((int)a.i), "r" ((int)b.i));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m.r): "i" (15));
+    asm volatile("MULT $ac1, %0, %1" : : "r" ((int)a.i), "r" ((int)b.r));
+    asm volatile("msub $ac1, %0, %1" : : "r" ((int)a.r), "r" ((int)b.i));
+    asm volatile("EXTR.W %0,$ac1, %1" : "=r" (m.i): "i" (15));
+
+    return m;
+}
+
+#endif /* FIXED_POINT */
+
+#define OVERRIDE_kf_bfly5
+static void kf_bfly5(
+                     kiss_fft_cpx * Fout,
+                     const size_t fstride,
+                     const kiss_fft_state *st,
+                     int m,
+                     int N,
+                     int mm
+                    )
+{
+   kiss_fft_cpx *Fout0,*Fout1,*Fout2,*Fout3,*Fout4;
+   int i, u;
+   kiss_fft_cpx scratch[13];
+
+   const kiss_twiddle_cpx *tw;
+   kiss_twiddle_cpx ya,yb;
+   kiss_fft_cpx * Fout_beg = Fout;
+
+#ifdef FIXED_POINT
+   ya.r = 10126;
+   ya.i = -31164;
+   yb.r = -26510;
+   yb.i = -19261;
+#else
+   ya = st->twiddles[fstride*m];
+   yb = st->twiddles[fstride*2*m];
+#endif
+
+   tw=st->twiddles;
+
+   for (i=0;i<N;i++)
+   {
+      Fout = Fout_beg + i*mm;
+      Fout0=Fout;
+      Fout1=Fout0+m;
+      Fout2=Fout0+2*m;
+      Fout3=Fout0+3*m;
+      Fout4=Fout0+4*m;
+
+      /* For non-custom modes, m is guaranteed to be a multiple of 4. */
+      for ( u=0; u<m; ++u ) {
+         scratch[0] = *Fout0;
+
+
+         C_MUL(scratch[1] ,*Fout1, tw[u*fstride]);
+         C_MUL(scratch[2] ,*Fout2, tw[2*u*fstride]);
+         C_MUL(scratch[3] ,*Fout3, tw[3*u*fstride]);
+         C_MUL(scratch[4] ,*Fout4, tw[4*u*fstride]);
+
+         C_ADD( scratch[7],scratch[1],scratch[4]);
+         C_SUB( scratch[10],scratch[1],scratch[4]);
+         C_ADD( scratch[8],scratch[2],scratch[3]);
+         C_SUB( scratch[9],scratch[2],scratch[3]);
+
+         Fout0->r += scratch[7].r + scratch[8].r;
+         Fout0->i += scratch[7].i + scratch[8].i;
+         scratch[5].r = scratch[0].r + S_MUL_ADD(scratch[7].r,ya.r,scratch[8].r,yb.r);
+         scratch[5].i = scratch[0].i + S_MUL_ADD(scratch[7].i,ya.r,scratch[8].i,yb.r);
+
+         scratch[6].r =  S_MUL_ADD(scratch[10].i,ya.i,scratch[9].i,yb.i);
+         scratch[6].i =  -S_MUL_ADD(scratch[10].r,ya.i,scratch[9].r,yb.i);
+
+         C_SUB(*Fout1,scratch[5],scratch[6]);
+         C_ADD(*Fout4,scratch[5],scratch[6]);
+
+         scratch[11].r = scratch[0].r + S_MUL_ADD(scratch[7].r,yb.r,scratch[8].r,ya.r);
+         scratch[11].i = scratch[0].i + S_MUL_ADD(scratch[7].i,yb.r,scratch[8].i,ya.r);
+
+         scratch[12].r =  S_MUL_SUB(scratch[9].i,ya.i,scratch[10].i,yb.i);
+         scratch[12].i =  S_MUL_SUB(scratch[10].r,yb.i,scratch[9].r,ya.i);
+
+         C_ADD(*Fout2,scratch[11],scratch[12]);
+         C_SUB(*Fout3,scratch[11],scratch[12]);
+
+         ++Fout0;++Fout1;++Fout2;++Fout3;++Fout4;
+      }
+   }
+}
+
+
+#endif /* KISS_FFT_MIPSR1_H */
diff --git a/media/libopus/celt/mips/mdct_mipsr1.h b/media/libopus/celt/mips/mdct_mipsr1.h
new file mode 100644
index 000000000..2934dab77
--- /dev/null
+++ b/media/libopus/celt/mips/mdct_mipsr1.h
@@ -0,0 +1,288 @@
+/* Copyright (c) 2007-2008 CSIRO
+   Copyright (c) 2007-2008 Xiph.Org Foundation
+   Written by Jean-Marc Valin */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/* This is a simple MDCT implementation that uses a N/4 complex FFT
+   to do most of the work. It should be relatively straightforward to
+   plug in pretty much and FFT here.
+
+   This replaces the Vorbis FFT (and uses the exact same API), which
+   was a bit too messy and that was ending up duplicating code
+   (might as well use the same FFT everywhere).
+
+   The algorithm is similar to (and inspired from) Fabrice Bellard's
+   MDCT implementation in FFMPEG, but has differences in signs, ordering
+   and scaling in many places.
+*/
+#ifndef __MDCT_MIPSR1_H__
+#define __MDCT_MIPSR1_H__
+
+#ifndef SKIP_CONFIG_H
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+#endif
+
+#include "mdct.h"
+#include "kiss_fft.h"
+#include "_kiss_fft_guts.h"
+#include <math.h>
+#include "os_support.h"
+#include "mathops.h"
+#include "stack_alloc.h"
+
+/* Forward MDCT trashes the input array */
+#define OVERRIDE_clt_mdct_forward
+void clt_mdct_forward(const mdct_lookup *l, kiss_fft_scalar *in, kiss_fft_scalar * OPUS_RESTRICT out,
+      const opus_val16 *window, int overlap, int shift, int stride, int arch)
+{
+   int i;
+   int N, N2, N4;
+   VARDECL(kiss_fft_scalar, f);
+   VARDECL(kiss_fft_cpx, f2);
+   const kiss_fft_state *st = l->kfft[shift];
+   const kiss_twiddle_scalar *trig;
+   opus_val16 scale;
+#ifdef FIXED_POINT
+   /* Allows us to scale with MULT16_32_Q16(), which is faster than
+      MULT16_32_Q15() on ARM. */
+   int scale_shift = st->scale_shift-1;
+#endif
+
+    (void)arch;
+
+   SAVE_STACK;
+   scale = st->scale;
+
+   N = l->n;
+   trig = l->trig;
+   for (i=0;i<shift;i++)
+   {
+      N >>= 1;
+      trig += N;
+   }
+   N2 = N>>1;
+   N4 = N>>2;
+
+   ALLOC(f, N2, kiss_fft_scalar);
+   ALLOC(f2, N4, kiss_fft_cpx);
+
+   /* Consider the input to be composed of four blocks: [a, b, c, d] */
+   /* Window, shuffle, fold */
+   {
+      /* Temp pointers to make it really clear to the compiler what we're doing */
+      const kiss_fft_scalar * OPUS_RESTRICT xp1 = in+(overlap>>1);
+      const kiss_fft_scalar * OPUS_RESTRICT xp2 = in+N2-1+(overlap>>1);
+      kiss_fft_scalar * OPUS_RESTRICT yp = f;
+      const opus_val16 * OPUS_RESTRICT wp1 = window+(overlap>>1);
+      const opus_val16 * OPUS_RESTRICT wp2 = window+(overlap>>1)-1;
+      for(i=0;i<((overlap+3)>>2);i++)
+      {
+         /* Real part arranged as -d-cR, Imag part arranged as -b+aR*/
+          *yp++ = S_MUL_ADD(*wp2, xp1[N2],*wp1,*xp2);
+          *yp++ = S_MUL_SUB(*wp1, *xp1,*wp2, xp2[-N2]);
+         xp1+=2;
+         xp2-=2;
+         wp1+=2;
+         wp2-=2;
+      }
+      wp1 = window;
+      wp2 = window+overlap-1;
+      for(;i<N4-((overlap+3)>>2);i++)
+      {
+         /* Real part arranged as a-bR, Imag part arranged as -c-dR */
+         *yp++ = *xp2;
+         *yp++ = *xp1;
+         xp1+=2;
+         xp2-=2;
+      }
+      for(;i<N4;i++)
+      {
+         /* Real part arranged as a-bR, Imag part arranged as -c-dR */
+          *yp++ =  S_MUL_SUB(*wp2, *xp2, *wp1, xp1[-N2]);
+          *yp++ = S_MUL_ADD(*wp2, *xp1, *wp1, xp2[N2]);
+         xp1+=2;
+         xp2-=2;
+         wp1+=2;
+         wp2-=2;
+      }
+   }
+   /* Pre-rotation */
+   {
+      kiss_fft_scalar * OPUS_RESTRICT yp = f;
+      const kiss_twiddle_scalar *t = &trig[0];
+      for(i=0;i<N4;i++)
+      {
+         kiss_fft_cpx yc;
+         kiss_twiddle_scalar t0, t1;
+         kiss_fft_scalar re, im, yr, yi;
+         t0 = t[i];
+         t1 = t[N4+i];
+         re = *yp++;
+         im = *yp++;
+
+         yr = S_MUL_SUB(re,t0,im,t1);
+         yi = S_MUL_ADD(im,t0,re,t1);
+
+         yc.r = yr;
+         yc.i = yi;
+         yc.r = PSHR32(MULT16_32_Q16(scale, yc.r), scale_shift);
+         yc.i = PSHR32(MULT16_32_Q16(scale, yc.i), scale_shift);
+         f2[st->bitrev[i]] = yc;
+      }
+   }
+
+   /* N/4 complex FFT, does not downscale anymore */
+   opus_fft_impl(st, f2);
+
+   /* Post-rotate */
+   {
+      /* Temp pointers to make it really clear to the compiler what we're doing */
+      const kiss_fft_cpx * OPUS_RESTRICT fp = f2;
+      kiss_fft_scalar * OPUS_RESTRICT yp1 = out;
+      kiss_fft_scalar * OPUS_RESTRICT yp2 = out+stride*(N2-1);
+      const kiss_twiddle_scalar *t = &trig[0];
+      /* Temp pointers to make it really clear to the compiler what we're doing */
+      for(i=0;i<N4;i++)
+      {
+         kiss_fft_scalar yr, yi;
+         yr = S_MUL_SUB(fp->i,t[N4+i] , fp->r,t[i]);
+         yi = S_MUL_ADD(fp->r,t[N4+i] ,fp->i,t[i]);
+         *yp1 = yr;
+         *yp2 = yi;
+         fp++;
+         yp1 += 2*stride;
+         yp2 -= 2*stride;
+      }
+   }
+   RESTORE_STACK;
+}
+
+#define OVERRIDE_clt_mdct_backward
+void clt_mdct_backward(const mdct_lookup *l, kiss_fft_scalar *in, kiss_fft_scalar * OPUS_RESTRICT out,
+      const opus_val16 * OPUS_RESTRICT window, int overlap, int shift, int stride, int arch)
+{
+   int i;
+   int N, N2, N4;
+   const kiss_twiddle_scalar *trig;
+
+    (void)arch;
+
+   N = l->n;
+   trig = l->trig;
+   for (i=0;i<shift;i++)
+   {
+      N >>= 1;
+      trig += N;
+   }
+   N2 = N>>1;
+   N4 = N>>2;
+
+   /* Pre-rotate */
+   {
+      /* Temp pointers to make it really clear to the compiler what we're doing */
+      const kiss_fft_scalar * OPUS_RESTRICT xp1 = in;
+      const kiss_fft_scalar * OPUS_RESTRICT xp2 = in+stride*(N2-1);
+      kiss_fft_scalar * OPUS_RESTRICT yp = out+(overlap>>1);
+      const kiss_twiddle_scalar * OPUS_RESTRICT t = &trig[0];
+      const opus_int16 * OPUS_RESTRICT bitrev = l->kfft[shift]->bitrev;
+      for(i=0;i<N4;i++)
+      {
+         int rev;
+         kiss_fft_scalar yr, yi;
+         rev = *bitrev++;
+         yr = S_MUL_ADD(*xp2, t[i] , *xp1, t[N4+i]);
+         yi = S_MUL_SUB(*xp1, t[i] , *xp2, t[N4+i]);
+         /* We swap real and imag because we use an FFT instead of an IFFT. */
+         yp[2*rev+1] = yr;
+         yp[2*rev] = yi;
+         /* Storing the pre-rotation directly in the bitrev order. */
+         xp1+=2*stride;
+         xp2-=2*stride;
+      }
+   }
+
+   opus_fft_impl(l->kfft[shift], (kiss_fft_cpx*)(out+(overlap>>1)));
+
+   /* Post-rotate and de-shuffle from both ends of the buffer at once to make
+      it in-place. */
+   {
+      kiss_fft_scalar * OPUS_RESTRICT yp0 = out+(overlap>>1);
+      kiss_fft_scalar * OPUS_RESTRICT yp1 = out+(overlap>>1)+N2-2;
+      const kiss_twiddle_scalar *t = &trig[0];
+      /* Loop to (N4+1)>>1 to handle odd N4. When N4 is odd, the
+         middle pair will be computed twice. */
+      for(i=0;i<(N4+1)>>1;i++)
+      {
+         kiss_fft_scalar re, im, yr, yi;
+         kiss_twiddle_scalar t0, t1;
+         /* We swap real and imag because we're using an FFT instead of an IFFT. */
+         re = yp0[1];
+         im = yp0[0];
+         t0 = t[i];
+         t1 = t[N4+i];
+         /* We'd scale up by 2 here, but instead it's done when mixing the windows */
+         yr = S_MUL_ADD(re,t0 , im,t1);
+         yi = S_MUL_SUB(re,t1 , im,t0);
+         /* We swap real and imag because we're using an FFT instead of an IFFT. */
+         re = yp1[1];
+         im = yp1[0];
+         yp0[0] = yr;
+         yp1[1] = yi;
+
+         t0 = t[(N4-i-1)];
+         t1 = t[(N2-i-1)];
+         /* We'd scale up by 2 here, but instead it's done when mixing the windows */
+         yr = S_MUL_ADD(re,t0,im,t1);
+         yi = S_MUL_SUB(re,t1,im,t0);
+         yp1[0] = yr;
+         yp0[1] = yi;
+         yp0 += 2;
+         yp1 -= 2;
+      }
+   }
+
+   /* Mirror on both sides for TDAC */
+   {
+      kiss_fft_scalar * OPUS_RESTRICT xp1 = out+overlap-1;
+      kiss_fft_scalar * OPUS_RESTRICT yp1 = out;
+      const opus_val16 * OPUS_RESTRICT wp1 = window;
+      const opus_val16 * OPUS_RESTRICT wp2 = window+overlap-1;
+
+      for(i = 0; i < overlap/2; i++)
+      {
+         kiss_fft_scalar x1, x2;
+         x1 = *xp1;
+         x2 = *yp1;
+         *yp1++ = MULT16_32_Q15(*wp2, x2) - MULT16_32_Q15(*wp1, x1);
+         *xp1-- = MULT16_32_Q15(*wp1, x2) + MULT16_32_Q15(*wp2, x1);
+         wp1++;
+         wp2--;
+      }
+   }
+}
+#endif /* __MDCT_MIPSR1_H__ */
diff --git a/media/libopus/celt/mips/pitch_mipsr1.h b/media/libopus/celt/mips/pitch_mipsr1.h
new file mode 100644
index 000000000..a9500aff5
--- /dev/null
+++ b/media/libopus/celt/mips/pitch_mipsr1.h
@@ -0,0 +1,161 @@
+/* Copyright (c) 2007-2008 CSIRO
+   Copyright (c) 2007-2009 Xiph.Org Foundation
+   Written by Jean-Marc Valin */
+/**
+   @file pitch.h
+   @brief Pitch analysis
+ */
+
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef PITCH_MIPSR1_H
+#define PITCH_MIPSR1_H
+
+#define OVERRIDE_DUAL_INNER_PROD
+static inline void dual_inner_prod(const opus_val16 *x, const opus_val16 *y01, const opus_val16 *y02,
+      int N, opus_val32 *xy1, opus_val32 *xy2, int arch)
+{
+   int j;
+   opus_val32 xy01=0;
+   opus_val32 xy02=0;
+
+   (void)arch;
+
+   asm volatile("MULT $ac1, $0, $0");
+   asm volatile("MULT $ac2, $0, $0");
+   /* Compute the norm of X+Y and X-Y as |X|^2 + |Y|^2 +/- sum(xy) */
+   for (j=0;j<N;j++)
+   {
+      asm volatile("MADD $ac1, %0, %1" : : "r" ((int)x[j]), "r" ((int)y01[j]));
+      asm volatile("MADD $ac2, %0, %1" : : "r" ((int)x[j]), "r" ((int)y02[j]));
+      ++j;
+      asm volatile("MADD $ac1, %0, %1" : : "r" ((int)x[j]), "r" ((int)y01[j]));
+      asm volatile("MADD $ac2, %0, %1" : : "r" ((int)x[j]), "r" ((int)y02[j]));
+   }
+   asm volatile ("mflo %0, $ac1": "=r"(xy01));
+   asm volatile ("mflo %0, $ac2": "=r"(xy02));
+   *xy1 = xy01;
+   *xy2 = xy02;
+}
+
+static inline void xcorr_kernel_mips(const opus_val16 * x,
+      const opus_val16 * y, opus_val32 sum[4], int len)
+{
+   int j;
+   opus_val16 y_0, y_1, y_2, y_3;
+
+    opus_int64 sum_0, sum_1, sum_2, sum_3;
+    sum_0 =  (opus_int64)sum[0];
+    sum_1 =  (opus_int64)sum[1];
+    sum_2 =  (opus_int64)sum[2];
+    sum_3 =  (opus_int64)sum[3];
+
+    y_3=0; /* gcc doesn't realize that y_3 can't be used uninitialized */
+    y_0=*y++;
+    y_1=*y++;
+    y_2=*y++;
+    for (j=0;j<len-3;j+=4)
+    {
+        opus_val16 tmp;
+        tmp = *x++;
+        y_3=*y++;
+
+        sum_0 = __builtin_mips_madd( sum_0, tmp, y_0);
+        sum_1 = __builtin_mips_madd( sum_1, tmp, y_1);
+        sum_2 = __builtin_mips_madd( sum_2, tmp, y_2);
+        sum_3 = __builtin_mips_madd( sum_3, tmp, y_3);
+
+        tmp=*x++;
+        y_0=*y++;
+
+        sum_0 = __builtin_mips_madd( sum_0, tmp, y_1 );
+        sum_1 = __builtin_mips_madd( sum_1, tmp, y_2 );
+        sum_2 = __builtin_mips_madd( sum_2, tmp, y_3);
+        sum_3 = __builtin_mips_madd( sum_3, tmp, y_0);
+
+       tmp=*x++;
+       y_1=*y++;
+
+       sum_0 = __builtin_mips_madd( sum_0, tmp, y_2 );
+       sum_1 = __builtin_mips_madd( sum_1, tmp, y_3 );
+       sum_2 = __builtin_mips_madd( sum_2, tmp, y_0);
+       sum_3 = __builtin_mips_madd( sum_3, tmp, y_1);
+
+
+      tmp=*x++;
+      y_2=*y++;
+
+       sum_0 = __builtin_mips_madd( sum_0, tmp, y_3 );
+       sum_1 = __builtin_mips_madd( sum_1, tmp, y_0 );
+       sum_2 = __builtin_mips_madd( sum_2, tmp, y_1);
+       sum_3 = __builtin_mips_madd( sum_3, tmp, y_2);
+
+   }
+   if (j++<len)
+   {
+      opus_val16 tmp = *x++;
+      y_3=*y++;
+
+       sum_0 = __builtin_mips_madd( sum_0, tmp, y_0 );
+       sum_1 = __builtin_mips_madd( sum_1, tmp, y_1 );
+       sum_2 = __builtin_mips_madd( sum_2, tmp, y_2);
+       sum_3 = __builtin_mips_madd( sum_3, tmp, y_3);
+   }
+
+   if (j++<len)
+   {
+      opus_val16 tmp=*x++;
+      y_0=*y++;
+
+      sum_0 = __builtin_mips_madd( sum_0, tmp, y_1 );
+      sum_1 = __builtin_mips_madd( sum_1, tmp, y_2 );
+      sum_2 = __builtin_mips_madd( sum_2, tmp, y_3);
+      sum_3 = __builtin_mips_madd( sum_3, tmp, y_0);
+   }
+
+   if (j<len)
+   {
+      opus_val16 tmp=*x++;
+      y_1=*y++;
+
+       sum_0 = __builtin_mips_madd( sum_0, tmp, y_2 );
+       sum_1 = __builtin_mips_madd( sum_1, tmp, y_3 );
+       sum_2 = __builtin_mips_madd( sum_2, tmp, y_0);
+       sum_3 = __builtin_mips_madd( sum_3, tmp, y_1);
+
+   }
+
+   sum[0] = (opus_val32)sum_0;
+   sum[1] = (opus_val32)sum_1;
+   sum[2] = (opus_val32)sum_2;
+   sum[3] = (opus_val32)sum_3;
+}
+
+#define OVERRIDE_XCORR_KERNEL
+#define xcorr_kernel(x, y, sum, len, arch) \
+    ((void)(arch), xcorr_kernel_mips(x, y, sum, len))
+
+#endif /* PITCH_MIPSR1_H */
diff --git a/media/libopus/celt/mips/vq_mipsr1.h b/media/libopus/celt/mips/vq_mipsr1.h
new file mode 100644
index 000000000..54cef8613
--- /dev/null
+++ b/media/libopus/celt/mips/vq_mipsr1.h
@@ -0,0 +1,125 @@
+/* Copyright (c) 2007-2008 CSIRO
+   Copyright (c) 2007-2009 Xiph.Org Foundation
+   Written by Jean-Marc Valin */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef __VQ_MIPSR1_H__
+#define __VQ_MIPSR1_H__
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "mathops.h"
+#include "arch.h"
+
+static unsigned extract_collapse_mask(int *iy, int N, int B);
+static void normalise_residual(int * OPUS_RESTRICT iy, celt_norm * OPUS_RESTRICT X, int N, opus_val32 Ryy, opus_val16 gain);
+static void exp_rotation(celt_norm *X, int len, int dir, int stride, int K, int spread);
+static void renormalise_vector_mips(celt_norm *X, int N, opus_val16 gain, int arch);
+
+#define OVERRIDE_vq_exp_rotation1
+static void exp_rotation1(celt_norm *X, int len, int stride, opus_val16 c, opus_val16 s)
+{
+   int i;
+   opus_val16 ms;
+   celt_norm *Xptr;
+   Xptr = X;
+   ms = NEG16(s);
+   for (i=0;i<len-stride;i++)
+   {
+      celt_norm x1, x2;
+      x1 = Xptr[0];
+      x2 = Xptr[stride];
+      Xptr[stride] = EXTRACT16(PSHR32(MAC16_16(MULT16_16(c, x2),  s, x1), 15));
+      *Xptr++      = EXTRACT16(PSHR32(MAC16_16(MULT16_16(c, x1), ms, x2), 15));
+   }
+   Xptr = &X[len-2*stride-1];
+   for (i=len-2*stride-1;i>=0;i--)
+   {
+      celt_norm x1, x2;
+      x1 = Xptr[0];
+      x2 = Xptr[stride];
+      Xptr[stride] = EXTRACT16(PSHR32(MAC16_16(MULT16_16(c, x2),  s, x1), 15));
+      *Xptr--      = EXTRACT16(PSHR32(MAC16_16(MULT16_16(c, x1), ms, x2), 15));
+   }
+}
+
+#define OVERRIDE_renormalise_vector
+
+#define renormalise_vector(X, N, gain, arch) \
+ (renormalise_vector_mips(X, N, gain, arch))
+
+void renormalise_vector_mips(celt_norm *X, int N, opus_val16 gain, int arch)
+{
+   int i;
+#ifdef FIXED_POINT
+   int k;
+#endif
+   opus_val32 E = EPSILON;
+   opus_val16 g;
+   opus_val32 t;
+   celt_norm *xptr = X;
+   int X0, X1;
+
+   (void)arch;
+
+   asm volatile("mult $ac1, $0, $0");
+   asm volatile("MTLO %0, $ac1" : :"r" (E));
+   /*if(N %4)
+       printf("error");*/
+   for (i=0;i<N-2;i+=2)
+   {
+      X0 = (int)*xptr++;
+      asm volatile("MADD $ac1, %0, %1" : : "r" (X0), "r" (X0));
+
+      X1 = (int)*xptr++;
+      asm volatile("MADD $ac1, %0, %1" : : "r" (X1), "r" (X1));
+   }
+
+   for (;i<N;i++)
+   {
+      X0 = (int)*xptr++;
+      asm volatile("MADD $ac1, %0, %1" : : "r" (X0), "r" (X0));
+   }
+
+   asm volatile("MFLO %0, $ac1" : "=r" (E));
+#ifdef FIXED_POINT
+   k = celt_ilog2(E)>>1;
+#endif
+   t = VSHR32(E, 2*(k-7));
+   g = MULT16_16_P15(celt_rsqrt_norm(t),gain);
+
+   xptr = X;
+   for (i=0;i<N;i++)
+   {
+      *xptr = EXTRACT16(PSHR32(MULT16_16(g, *xptr), k+1));
+      xptr++;
+   }
+   /*return celt_sqrt(E);*/
+}
+
+#endif /* __VQ_MIPSR1_H__ */