Add m-esr52 at 52.6.0

1 files changed, 1091 insertions, 0 deletions

diff --git a/media/libjpeg/jchuff.c b/media/libjpeg/jchuff.c
new file mode 100644
index 000000000..fffaacebc
--- /dev/null
+++ b/media/libjpeg/jchuff.c
@@ -0,0 +1,1091 @@
+/*
+ * jchuff.c
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * libjpeg-turbo Modifications:
+ * Copyright (C) 2009-2011, 2014-2016, D. R. Commander.
+ * Copyright (C) 2015, Matthieu Darbois.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file contains Huffman entropy encoding routines.
+ *
+ * Much of the complexity here has to do with supporting output suspension.
+ * If the data destination module demands suspension, we want to be able to
+ * back up to the start of the current MCU.  To do this, we copy state
+ * variables into local working storage, and update them back to the
+ * permanent JPEG objects only upon successful completion of an MCU.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jsimd.h"
+#include "jconfigint.h"
+#include <limits.h>
+
+/*
+ * NOTE: If USE_CLZ_INTRINSIC is defined, then clz/bsr instructions will be
+ * used for bit counting rather than the lookup table.  This will reduce the
+ * memory footprint by 64k, which is important for some mobile applications
+ * that create many isolated instances of libjpeg-turbo (web browsers, for
+ * instance.)  This may improve performance on some mobile platforms as well.
+ * This feature is enabled by default only on ARM processors, because some x86
+ * chips have a slow implementation of bsr, and the use of clz/bsr cannot be
+ * shown to have a significant performance impact even on the x86 chips that
+ * have a fast implementation of it.  When building for ARMv6, you can
+ * explicitly disable the use of clz/bsr by adding -mthumb to the compiler
+ * flags (this defines __thumb__).
+ */
+
+/* NOTE: Both GCC and Clang define __GNUC__ */
+#if defined __GNUC__ && (defined __arm__ || defined __aarch64__)
+#if !defined __thumb__ || defined __thumb2__
+#define USE_CLZ_INTRINSIC
+#endif
+#endif
+
+#ifdef USE_CLZ_INTRINSIC
+#define JPEG_NBITS_NONZERO(x) (32 - __builtin_clz(x))
+#define JPEG_NBITS(x) (x ? JPEG_NBITS_NONZERO(x) : 0)
+#else
+#include "jpeg_nbits_table.h"
+#define JPEG_NBITS(x) (jpeg_nbits_table[x])
+#define JPEG_NBITS_NONZERO(x) JPEG_NBITS(x)
+#endif
+
+#ifndef min
+ #define min(a,b) ((a)<(b)?(a):(b))
+#endif
+
+
+/* Expanded entropy encoder object for Huffman encoding.
+ *
+ * The savable_state subrecord contains fields that change within an MCU,
+ * but must not be updated permanently until we complete the MCU.
+ */
+
+typedef struct {
+  size_t put_buffer;            /* current bit-accumulation buffer */
+  int put_bits;                 /* # of bits now in it */
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+} savable_state;
+
+/* This macro is to work around compilers with missing or broken
+ * structure assignment.  You'll need to fix this code if you have
+ * such a compiler and you change MAX_COMPS_IN_SCAN.
+ */
+
+#ifndef NO_STRUCT_ASSIGN
+#define ASSIGN_STATE(dest,src)  ((dest) = (src))
+#else
+#if MAX_COMPS_IN_SCAN == 4
+#define ASSIGN_STATE(dest,src)  \
+        ((dest).put_buffer = (src).put_buffer, \
+         (dest).put_bits = (src).put_bits, \
+         (dest).last_dc_val[0] = (src).last_dc_val[0], \
+         (dest).last_dc_val[1] = (src).last_dc_val[1], \
+         (dest).last_dc_val[2] = (src).last_dc_val[2], \
+         (dest).last_dc_val[3] = (src).last_dc_val[3])
+#endif
+#endif
+
+
+typedef struct {
+  struct jpeg_entropy_encoder pub; /* public fields */
+
+  savable_state saved;          /* Bit buffer & DC state at start of MCU */
+
+  /* These fields are NOT loaded into local working state. */
+  unsigned int restarts_to_go;  /* MCUs left in this restart interval */
+  int next_restart_num;         /* next restart number to write (0-7) */
+
+  /* Pointers to derived tables (these workspaces have image lifespan) */
+  c_derived_tbl *dc_derived_tbls[NUM_HUFF_TBLS];
+  c_derived_tbl *ac_derived_tbls[NUM_HUFF_TBLS];
+
+#ifdef ENTROPY_OPT_SUPPORTED    /* Statistics tables for optimization */
+  long *dc_count_ptrs[NUM_HUFF_TBLS];
+  long *ac_count_ptrs[NUM_HUFF_TBLS];
+#endif
+
+  int simd;
+} huff_entropy_encoder;
+
+typedef huff_entropy_encoder *huff_entropy_ptr;
+
+/* Working state while writing an MCU.
+ * This struct contains all the fields that are needed by subroutines.
+ */
+
+typedef struct {
+  JOCTET *next_output_byte;     /* => next byte to write in buffer */
+  size_t free_in_buffer;        /* # of byte spaces remaining in buffer */
+  savable_state cur;            /* Current bit buffer & DC state */
+  j_compress_ptr cinfo;         /* dump_buffer needs access to this */
+} working_state;
+
+
+/* Forward declarations */
+METHODDEF(boolean) encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data);
+METHODDEF(void) finish_pass_huff (j_compress_ptr cinfo);
+#ifdef ENTROPY_OPT_SUPPORTED
+METHODDEF(boolean) encode_mcu_gather (j_compress_ptr cinfo,
+                                      JBLOCKROW *MCU_data);
+METHODDEF(void) finish_pass_gather (j_compress_ptr cinfo);
+#endif
+
+
+/*
+ * Initialize for a Huffman-compressed scan.
+ * If gather_statistics is TRUE, we do not output anything during the scan,
+ * just count the Huffman symbols used and generate Huffman code tables.
+ */
+
+METHODDEF(void)
+start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci, dctbl, actbl;
+  jpeg_component_info *compptr;
+
+  if (gather_statistics) {
+#ifdef ENTROPY_OPT_SUPPORTED
+    entropy->pub.encode_mcu = encode_mcu_gather;
+    entropy->pub.finish_pass = finish_pass_gather;
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    entropy->pub.encode_mcu = encode_mcu_huff;
+    entropy->pub.finish_pass = finish_pass_huff;
+  }
+
+  entropy->simd = jsimd_can_huff_encode_one_block();
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    dctbl = compptr->dc_tbl_no;
+    actbl = compptr->ac_tbl_no;
+    if (gather_statistics) {
+#ifdef ENTROPY_OPT_SUPPORTED
+      /* Check for invalid table indexes */
+      /* (make_c_derived_tbl does this in the other path) */
+      if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS)
+        ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl);
+      if (actbl < 0 || actbl >= NUM_HUFF_TBLS)
+        ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl);
+      /* Allocate and zero the statistics tables */
+      /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
+      if (entropy->dc_count_ptrs[dctbl] == NULL)
+        entropy->dc_count_ptrs[dctbl] = (long *)
+          (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+                                      257 * sizeof(long));
+      MEMZERO(entropy->dc_count_ptrs[dctbl], 257 * sizeof(long));
+      if (entropy->ac_count_ptrs[actbl] == NULL)
+        entropy->ac_count_ptrs[actbl] = (long *)
+          (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+                                      257 * sizeof(long));
+      MEMZERO(entropy->ac_count_ptrs[actbl], 257 * sizeof(long));
+#endif
+    } else {
+      /* Compute derived values for Huffman tables */
+      /* We may do this more than once for a table, but it's not expensive */
+      jpeg_make_c_derived_tbl(cinfo, TRUE, dctbl,
+                              & entropy->dc_derived_tbls[dctbl]);
+      jpeg_make_c_derived_tbl(cinfo, FALSE, actbl,
+                              & entropy->ac_derived_tbls[actbl]);
+    }
+    /* Initialize DC predictions to 0 */
+    entropy->saved.last_dc_val[ci] = 0;
+  }
+
+  /* Initialize bit buffer to empty */
+  entropy->saved.put_buffer = 0;
+  entropy->saved.put_bits = 0;
+
+  /* Initialize restart stuff */
+  entropy->restarts_to_go = cinfo->restart_interval;
+  entropy->next_restart_num = 0;
+}
+
+
+/*
+ * Compute the derived values for a Huffman table.
+ * This routine also performs some validation checks on the table.
+ *
+ * Note this is also used by jcphuff.c.
+ */
+
+GLOBAL(void)
+jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno,
+                         c_derived_tbl **pdtbl)
+{
+  JHUFF_TBL *htbl;
+  c_derived_tbl *dtbl;
+  int p, i, l, lastp, si, maxsymbol;
+  char huffsize[257];
+  unsigned int huffcode[257];
+  unsigned int code;
+
+  /* Note that huffsize[] and huffcode[] are filled in code-length order,
+   * paralleling the order of the symbols themselves in htbl->huffval[].
+   */
+
+  /* Find the input Huffman table */
+  if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+  htbl =
+    isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+
+  /* Allocate a workspace if we haven't already done so. */
+  if (*pdtbl == NULL)
+    *pdtbl = (c_derived_tbl *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+                                  sizeof(c_derived_tbl));
+  dtbl = *pdtbl;
+
+  /* Figure C.1: make table of Huffman code length for each symbol */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    i = (int) htbl->bits[l];
+    if (i < 0 || p + i > 256)   /* protect against table overrun */
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    while (i--)
+      huffsize[p++] = (char) l;
+  }
+  huffsize[p] = 0;
+  lastp = p;
+
+  /* Figure C.2: generate the codes themselves */
+  /* We also validate that the counts represent a legal Huffman code tree. */
+
+  code = 0;
+  si = huffsize[0];
+  p = 0;
+  while (huffsize[p]) {
+    while (((int) huffsize[p]) == si) {
+      huffcode[p++] = code;
+      code++;
+    }
+    /* code is now 1 more than the last code used for codelength si; but
+     * it must still fit in si bits, since no code is allowed to be all ones.
+     */
+    if (((JLONG) code) >= (((JLONG) 1) << si))
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    code <<= 1;
+    si++;
+  }
+
+  /* Figure C.3: generate encoding tables */
+  /* These are code and size indexed by symbol value */
+
+  /* Set all codeless symbols to have code length 0;
+   * this lets us detect duplicate VAL entries here, and later
+   * allows emit_bits to detect any attempt to emit such symbols.
+   */
+  MEMZERO(dtbl->ehufsi, sizeof(dtbl->ehufsi));
+
+  /* This is also a convenient place to check for out-of-range
+   * and duplicated VAL entries.  We allow 0..255 for AC symbols
+   * but only 0..15 for DC.  (We could constrain them further
+   * based on data depth and mode, but this seems enough.)
+   */
+  maxsymbol = isDC ? 15 : 255;
+
+  for (p = 0; p < lastp; p++) {
+    i = htbl->huffval[p];
+    if (i < 0 || i > maxsymbol || dtbl->ehufsi[i])
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    dtbl->ehufco[i] = huffcode[p];
+    dtbl->ehufsi[i] = huffsize[p];
+  }
+}
+
+
+/* Outputting bytes to the file */
+
+/* Emit a byte, taking 'action' if must suspend. */
+#define emit_byte(state,val,action)  \
+        { *(state)->next_output_byte++ = (JOCTET) (val);  \
+          if (--(state)->free_in_buffer == 0)  \
+            if (! dump_buffer(state))  \
+              { action; } }
+
+
+LOCAL(boolean)
+dump_buffer (working_state *state)
+/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */
+{
+  struct jpeg_destination_mgr *dest = state->cinfo->dest;
+
+  if (! (*dest->empty_output_buffer) (state->cinfo))
+    return FALSE;
+  /* After a successful buffer dump, must reset buffer pointers */
+  state->next_output_byte = dest->next_output_byte;
+  state->free_in_buffer = dest->free_in_buffer;
+  return TRUE;
+}
+
+
+/* Outputting bits to the file */
+
+/* These macros perform the same task as the emit_bits() function in the
+ * original libjpeg code.  In addition to reducing overhead by explicitly
+ * inlining the code, additional performance is achieved by taking into
+ * account the size of the bit buffer and waiting until it is almost full
+ * before emptying it.  This mostly benefits 64-bit platforms, since 6
+ * bytes can be stored in a 64-bit bit buffer before it has to be emptied.
+ */
+
+#define EMIT_BYTE() { \
+  JOCTET c; \
+  put_bits -= 8; \
+  c = (JOCTET)GETJOCTET(put_buffer >> put_bits); \
+  *buffer++ = c; \
+  if (c == 0xFF)  /* need to stuff a zero byte? */ \
+    *buffer++ = 0; \
+ }
+
+#define PUT_BITS(code, size) { \
+  put_bits += size; \
+  put_buffer = (put_buffer << size) | code; \
+}
+
+#define CHECKBUF15() { \
+  if (put_bits > 15) { \
+    EMIT_BYTE() \
+    EMIT_BYTE() \
+  } \
+}
+
+#define CHECKBUF31() { \
+  if (put_bits > 31) { \
+    EMIT_BYTE() \
+    EMIT_BYTE() \
+    EMIT_BYTE() \
+    EMIT_BYTE() \
+  } \
+}
+
+#define CHECKBUF47() { \
+  if (put_bits > 47) { \
+    EMIT_BYTE() \
+    EMIT_BYTE() \
+    EMIT_BYTE() \
+    EMIT_BYTE() \
+    EMIT_BYTE() \
+    EMIT_BYTE() \
+  } \
+}
+
+#if !defined(_WIN32) && !defined(SIZEOF_SIZE_T)
+#error Cannot determine word size
+#endif
+
+#if SIZEOF_SIZE_T==8 || defined(_WIN64)
+
+#define EMIT_BITS(code, size) { \
+  CHECKBUF47() \
+  PUT_BITS(code, size) \
+}
+
+#define EMIT_CODE(code, size) { \
+  temp2 &= (((JLONG) 1)<<nbits) - 1; \
+  CHECKBUF31() \
+  PUT_BITS(code, size) \
+  PUT_BITS(temp2, nbits) \
+ }
+
+#else
+
+#define EMIT_BITS(code, size) { \
+  PUT_BITS(code, size) \
+  CHECKBUF15() \
+}
+
+#define EMIT_CODE(code, size) { \
+  temp2 &= (((JLONG) 1)<<nbits) - 1; \
+  PUT_BITS(code, size) \
+  CHECKBUF15() \
+  PUT_BITS(temp2, nbits) \
+  CHECKBUF15() \
+ }
+
+#endif
+
+
+/* Although it is exceedingly rare, it is possible for a Huffman-encoded
+ * coefficient block to be larger than the 128-byte unencoded block.  For each
+ * of the 64 coefficients, PUT_BITS is invoked twice, and each invocation can
+ * theoretically store 16 bits (for a maximum of 2048 bits or 256 bytes per
+ * encoded block.)  If, for instance, one artificially sets the AC
+ * coefficients to alternating values of 32767 and -32768 (using the JPEG
+ * scanning order-- 1, 8, 16, etc.), then this will produce an encoded block
+ * larger than 200 bytes.
+ */
+#define BUFSIZE (DCTSIZE2 * 4)
+
+#define LOAD_BUFFER() { \
+  if (state->free_in_buffer < BUFSIZE) { \
+    localbuf = 1; \
+    buffer = _buffer; \
+  } \
+  else buffer = state->next_output_byte; \
+ }
+
+#define STORE_BUFFER() { \
+  if (localbuf) { \
+    bytes = buffer - _buffer; \
+    buffer = _buffer; \
+    while (bytes > 0) { \
+      bytestocopy = min(bytes, state->free_in_buffer); \
+      MEMCOPY(state->next_output_byte, buffer, bytestocopy); \
+      state->next_output_byte += bytestocopy; \
+      buffer += bytestocopy; \
+      state->free_in_buffer -= bytestocopy; \
+      if (state->free_in_buffer == 0) \
+        if (! dump_buffer(state)) return FALSE; \
+      bytes -= bytestocopy; \
+    } \
+  } \
+  else { \
+    state->free_in_buffer -= (buffer - state->next_output_byte); \
+    state->next_output_byte = buffer; \
+  } \
+ }
+
+
+LOCAL(boolean)
+flush_bits (working_state *state)
+{
+  JOCTET _buffer[BUFSIZE], *buffer;
+  size_t put_buffer;  int put_bits;
+  size_t bytes, bytestocopy;  int localbuf = 0;
+
+  put_buffer = state->cur.put_buffer;
+  put_bits = state->cur.put_bits;
+  LOAD_BUFFER()
+
+  /* fill any partial byte with ones */
+  PUT_BITS(0x7F, 7)
+  while (put_bits >= 8) EMIT_BYTE()
+
+  state->cur.put_buffer = 0;    /* and reset bit-buffer to empty */
+  state->cur.put_bits = 0;
+  STORE_BUFFER()
+
+  return TRUE;
+}
+
+
+/* Encode a single block's worth of coefficients */
+
+LOCAL(boolean)
+encode_one_block_simd (working_state *state, JCOEFPTR block, int last_dc_val,
+                       c_derived_tbl *dctbl, c_derived_tbl *actbl)
+{
+  JOCTET _buffer[BUFSIZE], *buffer;
+  size_t bytes, bytestocopy;  int localbuf = 0;
+
+  LOAD_BUFFER()
+
+  buffer = jsimd_huff_encode_one_block(state, buffer, block, last_dc_val,
+                                       dctbl, actbl);
+
+  STORE_BUFFER()
+
+  return TRUE;
+}
+
+LOCAL(boolean)
+encode_one_block (working_state *state, JCOEFPTR block, int last_dc_val,
+                  c_derived_tbl *dctbl, c_derived_tbl *actbl)
+{
+  int temp, temp2, temp3;
+  int nbits;
+  int r, code, size;
+  JOCTET _buffer[BUFSIZE], *buffer;
+  size_t put_buffer;  int put_bits;
+  int code_0xf0 = actbl->ehufco[0xf0], size_0xf0 = actbl->ehufsi[0xf0];
+  size_t bytes, bytestocopy;  int localbuf = 0;
+
+  put_buffer = state->cur.put_buffer;
+  put_bits = state->cur.put_bits;
+  LOAD_BUFFER()
+
+  /* Encode the DC coefficient difference per section F.1.2.1 */
+
+  temp = temp2 = block[0] - last_dc_val;
+
+ /* This is a well-known technique for obtaining the absolute value without a
+  * branch.  It is derived from an assembly language technique presented in
+  * "How to Optimize for the Pentium Processors", Copyright (c) 1996, 1997 by
+  * Agner Fog.
+  */
+  temp3 = temp >> (CHAR_BIT * sizeof(int) - 1);
+  temp ^= temp3;
+  temp -= temp3;
+
+  /* For a negative input, want temp2 = bitwise complement of abs(input) */
+  /* This code assumes we are on a two's complement machine */
+  temp2 += temp3;
+
+  /* Find the number of bits needed for the magnitude of the coefficient */
+  nbits = JPEG_NBITS(temp);
+
+  /* Emit the Huffman-coded symbol for the number of bits */
+  code = dctbl->ehufco[nbits];
+  size = dctbl->ehufsi[nbits];
+  EMIT_BITS(code, size)
+
+  /* Mask off any extra bits in code */
+  temp2 &= (((JLONG) 1)<<nbits) - 1;
+
+  /* Emit that number of bits of the value, if positive, */
+  /* or the complement of its magnitude, if negative. */
+  EMIT_BITS(temp2, nbits)
+
+  /* Encode the AC coefficients per section F.1.2.2 */
+
+  r = 0;                        /* r = run length of zeros */
+
+/* Manually unroll the k loop to eliminate the counter variable.  This
+ * improves performance greatly on systems with a limited number of
+ * registers (such as x86.)
+ */
+#define kloop(jpeg_natural_order_of_k) {  \
+  if ((temp = block[jpeg_natural_order_of_k]) == 0) { \
+    r++; \
+  } else { \
+    temp2 = temp; \
+    /* Branch-less absolute value, bitwise complement, etc., same as above */ \
+    temp3 = temp >> (CHAR_BIT * sizeof(int) - 1); \
+    temp ^= temp3; \
+    temp -= temp3; \
+    temp2 += temp3; \
+    nbits = JPEG_NBITS_NONZERO(temp); \
+    /* if run length > 15, must emit special run-length-16 codes (0xF0) */ \
+    while (r > 15) { \
+      EMIT_BITS(code_0xf0, size_0xf0) \
+      r -= 16; \
+    } \
+    /* Emit Huffman symbol for run length / number of bits */ \
+    temp3 = (r << 4) + nbits;  \
+    code = actbl->ehufco[temp3]; \
+    size = actbl->ehufsi[temp3]; \
+    EMIT_CODE(code, size) \
+    r = 0;  \
+  } \
+}
+
+  /* One iteration for each value in jpeg_natural_order[] */
+  kloop(1);   kloop(8);   kloop(16);  kloop(9);   kloop(2);   kloop(3);
+  kloop(10);  kloop(17);  kloop(24);  kloop(32);  kloop(25);  kloop(18);
+  kloop(11);  kloop(4);   kloop(5);   kloop(12);  kloop(19);  kloop(26);
+  kloop(33);  kloop(40);  kloop(48);  kloop(41);  kloop(34);  kloop(27);
+  kloop(20);  kloop(13);  kloop(6);   kloop(7);   kloop(14);  kloop(21);
+  kloop(28);  kloop(35);  kloop(42);  kloop(49);  kloop(56);  kloop(57);
+  kloop(50);  kloop(43);  kloop(36);  kloop(29);  kloop(22);  kloop(15);
+  kloop(23);  kloop(30);  kloop(37);  kloop(44);  kloop(51);  kloop(58);
+  kloop(59);  kloop(52);  kloop(45);  kloop(38);  kloop(31);  kloop(39);
+  kloop(46);  kloop(53);  kloop(60);  kloop(61);  kloop(54);  kloop(47);
+  kloop(55);  kloop(62);  kloop(63);
+
+  /* If the last coef(s) were zero, emit an end-of-block code */
+  if (r > 0) {
+    code = actbl->ehufco[0];
+    size = actbl->ehufsi[0];
+    EMIT_BITS(code, size)
+  }
+
+  state->cur.put_buffer = put_buffer;
+  state->cur.put_bits = put_bits;
+  STORE_BUFFER()
+
+  return TRUE;
+}
+
+
+/*
+ * Emit a restart marker & resynchronize predictions.
+ */
+
+LOCAL(boolean)
+emit_restart (working_state *state, int restart_num)
+{
+  int ci;
+
+  if (! flush_bits(state))
+    return FALSE;
+
+  emit_byte(state, 0xFF, return FALSE);
+  emit_byte(state, JPEG_RST0 + restart_num, return FALSE);
+
+  /* Re-initialize DC predictions to 0 */
+  for (ci = 0; ci < state->cinfo->comps_in_scan; ci++)
+    state->cur.last_dc_val[ci] = 0;
+
+  /* The restart counter is not updated until we successfully write the MCU. */
+
+  return TRUE;
+}
+
+
+/*
+ * Encode and output one MCU's worth of Huffman-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  working_state state;
+  int blkn, ci;
+  jpeg_component_info *compptr;
+
+  /* Load up working state */
+  state.next_output_byte = cinfo->dest->next_output_byte;
+  state.free_in_buffer = cinfo->dest->free_in_buffer;
+  ASSIGN_STATE(state.cur, entropy->saved);
+  state.cinfo = cinfo;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! emit_restart(&state, entropy->next_restart_num))
+        return FALSE;
+  }
+
+  /* Encode the MCU data blocks */
+  if (entropy->simd) {
+    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+      ci = cinfo->MCU_membership[blkn];
+      compptr = cinfo->cur_comp_info[ci];
+      if (! encode_one_block_simd(&state,
+                                  MCU_data[blkn][0], state.cur.last_dc_val[ci],
+                                  entropy->dc_derived_tbls[compptr->dc_tbl_no],
+                                  entropy->ac_derived_tbls[compptr->ac_tbl_no]))
+        return FALSE;
+      /* Update last_dc_val */
+      state.cur.last_dc_val[ci] = MCU_data[blkn][0][0];
+    }
+  } else {
+    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+      ci = cinfo->MCU_membership[blkn];
+      compptr = cinfo->cur_comp_info[ci];
+      if (! encode_one_block(&state,
+                             MCU_data[blkn][0], state.cur.last_dc_val[ci],
+                             entropy->dc_derived_tbls[compptr->dc_tbl_no],
+                             entropy->ac_derived_tbls[compptr->ac_tbl_no]))
+        return FALSE;
+      /* Update last_dc_val */
+      state.cur.last_dc_val[ci] = MCU_data[blkn][0][0];
+    }
+  }
+
+  /* Completed MCU, so update state */
+  cinfo->dest->next_output_byte = state.next_output_byte;
+  cinfo->dest->free_in_buffer = state.free_in_buffer;
+  ASSIGN_STATE(entropy->saved, state.cur);
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Finish up at the end of a Huffman-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass_huff (j_compress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  working_state state;
+
+  /* Load up working state ... flush_bits needs it */
+  state.next_output_byte = cinfo->dest->next_output_byte;
+  state.free_in_buffer = cinfo->dest->free_in_buffer;
+  ASSIGN_STATE(state.cur, entropy->saved);
+  state.cinfo = cinfo;
+
+  /* Flush out the last data */
+  if (! flush_bits(&state))
+    ERREXIT(cinfo, JERR_CANT_SUSPEND);
+
+  /* Update state */
+  cinfo->dest->next_output_byte = state.next_output_byte;
+  cinfo->dest->free_in_buffer = state.free_in_buffer;
+  ASSIGN_STATE(entropy->saved, state.cur);
+}
+
+
+/*
+ * Huffman coding optimization.
+ *
+ * We first scan the supplied data and count the number of uses of each symbol
+ * that is to be Huffman-coded. (This process MUST agree with the code above.)
+ * Then we build a Huffman coding tree for the observed counts.
+ * Symbols which are not needed at all for the particular image are not
+ * assigned any code, which saves space in the DHT marker as well as in
+ * the compressed data.
+ */
+
+#ifdef ENTROPY_OPT_SUPPORTED
+
+
+/* Process a single block's worth of coefficients */
+
+LOCAL(void)
+htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
+                 long dc_counts[], long ac_counts[])
+{
+  register int temp;
+  register int nbits;
+  register int k, r;
+
+  /* Encode the DC coefficient difference per section F.1.2.1 */
+
+  temp = block[0] - last_dc_val;
+  if (temp < 0)
+    temp = -temp;
+
+  /* Find the number of bits needed for the magnitude of the coefficient */
+  nbits = 0;
+  while (temp) {
+    nbits++;
+    temp >>= 1;
+  }
+  /* Check for out-of-range coefficient values.
+   * Since we're encoding a difference, the range limit is twice as much.
+   */
+  if (nbits > MAX_COEF_BITS+1)
+    ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+
+  /* Count the Huffman symbol for the number of bits */
+  dc_counts[nbits]++;
+
+  /* Encode the AC coefficients per section F.1.2.2 */
+
+  r = 0;                        /* r = run length of zeros */
+
+  for (k = 1; k < DCTSIZE2; k++) {
+    if ((temp = block[jpeg_natural_order[k]]) == 0) {
+      r++;
+    } else {
+      /* if run length > 15, must emit special run-length-16 codes (0xF0) */
+      while (r > 15) {
+        ac_counts[0xF0]++;
+        r -= 16;
+      }
+
+      /* Find the number of bits needed for the magnitude of the coefficient */
+      if (temp < 0)
+        temp = -temp;
+
+      /* Find the number of bits needed for the magnitude of the coefficient */
+      nbits = 1;                /* there must be at least one 1 bit */
+      while ((temp >>= 1))
+        nbits++;
+      /* Check for out-of-range coefficient values */
+      if (nbits > MAX_COEF_BITS)
+        ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+
+      /* Count Huffman symbol for run length / number of bits */
+      ac_counts[(r << 4) + nbits]++;
+
+      r = 0;
+    }
+  }
+
+  /* If the last coef(s) were zero, emit an end-of-block code */
+  if (r > 0)
+    ac_counts[0]++;
+}
+
+
+/*
+ * Trial-encode one MCU's worth of Huffman-compressed coefficients.
+ * No data is actually output, so no suspension return is possible.
+ */
+
+METHODDEF(boolean)
+encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int blkn, ci;
+  jpeg_component_info *compptr;
+
+  /* Take care of restart intervals if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      /* Re-initialize DC predictions to 0 */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++)
+        entropy->saved.last_dc_val[ci] = 0;
+      /* Update restart state */
+      entropy->restarts_to_go = cinfo->restart_interval;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+    htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci],
+                    entropy->dc_count_ptrs[compptr->dc_tbl_no],
+                    entropy->ac_count_ptrs[compptr->ac_tbl_no]);
+    entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0];
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Generate the best Huffman code table for the given counts, fill htbl.
+ * Note this is also used by jcphuff.c.
+ *
+ * The JPEG standard requires that no symbol be assigned a codeword of all
+ * one bits (so that padding bits added at the end of a compressed segment
+ * can't look like a valid code).  Because of the canonical ordering of
+ * codewords, this just means that there must be an unused slot in the
+ * longest codeword length category.  Section K.2 of the JPEG spec suggests
+ * reserving such a slot by pretending that symbol 256 is a valid symbol
+ * with count 1.  In theory that's not optimal; giving it count zero but
+ * including it in the symbol set anyway should give a better Huffman code.
+ * But the theoretically better code actually seems to come out worse in
+ * practice, because it produces more all-ones bytes (which incur stuffed
+ * zero bytes in the final file).  In any case the difference is tiny.
+ *
+ * The JPEG standard requires Huffman codes to be no more than 16 bits long.
+ * If some symbols have a very small but nonzero probability, the Huffman tree
+ * must be adjusted to meet the code length restriction.  We currently use
+ * the adjustment method suggested in JPEG section K.2.  This method is *not*
+ * optimal; it may not choose the best possible limited-length code.  But
+ * typically only very-low-frequency symbols will be given less-than-optimal
+ * lengths, so the code is almost optimal.  Experimental comparisons against
+ * an optimal limited-length-code algorithm indicate that the difference is
+ * microscopic --- usually less than a hundredth of a percent of total size.
+ * So the extra complexity of an optimal algorithm doesn't seem worthwhile.
+ */
+
+GLOBAL(void)
+jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL *htbl, long freq[])
+{
+#define MAX_CLEN 32             /* assumed maximum initial code length */
+  UINT8 bits[MAX_CLEN+1];       /* bits[k] = # of symbols with code length k */
+  int codesize[257];            /* codesize[k] = code length of symbol k */
+  int others[257];              /* next symbol in current branch of tree */
+  int c1, c2;
+  int p, i, j;
+  long v;
+
+  /* This algorithm is explained in section K.2 of the JPEG standard */
+
+  MEMZERO(bits, sizeof(bits));
+  MEMZERO(codesize, sizeof(codesize));
+  for (i = 0; i < 257; i++)
+    others[i] = -1;             /* init links to empty */
+
+  freq[256] = 1;                /* make sure 256 has a nonzero count */
+  /* Including the pseudo-symbol 256 in the Huffman procedure guarantees
+   * that no real symbol is given code-value of all ones, because 256
+   * will be placed last in the largest codeword category.
+   */
+
+  /* Huffman's basic algorithm to assign optimal code lengths to symbols */
+
+  for (;;) {
+    /* Find the smallest nonzero frequency, set c1 = its symbol */
+    /* In case of ties, take the larger symbol number */
+    c1 = -1;
+    v = 1000000000L;
+    for (i = 0; i <= 256; i++) {
+      if (freq[i] && freq[i] <= v) {
+        v = freq[i];
+        c1 = i;
+      }
+    }
+
+    /* Find the next smallest nonzero frequency, set c2 = its symbol */
+    /* In case of ties, take the larger symbol number */
+    c2 = -1;
+    v = 1000000000L;
+    for (i = 0; i <= 256; i++) {
+      if (freq[i] && freq[i] <= v && i != c1) {
+        v = freq[i];
+        c2 = i;
+      }
+    }
+
+    /* Done if we've merged everything into one frequency */
+    if (c2 < 0)
+      break;
+
+    /* Else merge the two counts/trees */
+    freq[c1] += freq[c2];
+    freq[c2] = 0;
+
+    /* Increment the codesize of everything in c1's tree branch */
+    codesize[c1]++;
+    while (others[c1] >= 0) {
+      c1 = others[c1];
+      codesize[c1]++;
+    }
+
+    others[c1] = c2;            /* chain c2 onto c1's tree branch */
+
+    /* Increment the codesize of everything in c2's tree branch */
+    codesize[c2]++;
+    while (others[c2] >= 0) {
+      c2 = others[c2];
+      codesize[c2]++;
+    }
+  }
+
+  /* Now count the number of symbols of each code length */
+  for (i = 0; i <= 256; i++) {
+    if (codesize[i]) {
+      /* The JPEG standard seems to think that this can't happen, */
+      /* but I'm paranoid... */
+      if (codesize[i] > MAX_CLEN)
+        ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW);
+
+      bits[codesize[i]]++;
+    }
+  }
+
+  /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure
+   * Huffman procedure assigned any such lengths, we must adjust the coding.
+   * Here is what the JPEG spec says about how this next bit works:
+   * Since symbols are paired for the longest Huffman code, the symbols are
+   * removed from this length category two at a time.  The prefix for the pair
+   * (which is one bit shorter) is allocated to one of the pair; then,
+   * skipping the BITS entry for that prefix length, a code word from the next
+   * shortest nonzero BITS entry is converted into a prefix for two code words
+   * one bit longer.
+   */
+
+  for (i = MAX_CLEN; i > 16; i--) {
+    while (bits[i] > 0) {
+      j = i - 2;                /* find length of new prefix to be used */
+      while (bits[j] == 0)
+        j--;
+
+      bits[i] -= 2;             /* remove two symbols */
+      bits[i-1]++;              /* one goes in this length */
+      bits[j+1] += 2;           /* two new symbols in this length */
+      bits[j]--;                /* symbol of this length is now a prefix */
+    }
+  }
+
+  /* Remove the count for the pseudo-symbol 256 from the largest codelength */
+  while (bits[i] == 0)          /* find largest codelength still in use */
+    i--;
+  bits[i]--;
+
+  /* Return final symbol counts (only for lengths 0..16) */
+  MEMCOPY(htbl->bits, bits, sizeof(htbl->bits));
+
+  /* Return a list of the symbols sorted by code length */
+  /* It's not real clear to me why we don't need to consider the codelength
+   * changes made above, but the JPEG spec seems to think this works.
+   */
+  p = 0;
+  for (i = 1; i <= MAX_CLEN; i++) {
+    for (j = 0; j <= 255; j++) {
+      if (codesize[j] == i) {
+        htbl->huffval[p] = (UINT8) j;
+        p++;
+      }
+    }
+  }
+
+  /* Set sent_table FALSE so updated table will be written to JPEG file. */
+  htbl->sent_table = FALSE;
+}
+
+
+/*
+ * Finish up a statistics-gathering pass and create the new Huffman tables.
+ */
+
+METHODDEF(void)
+finish_pass_gather (j_compress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci, dctbl, actbl;
+  jpeg_component_info *compptr;
+  JHUFF_TBL **htblptr;
+  boolean did_dc[NUM_HUFF_TBLS];
+  boolean did_ac[NUM_HUFF_TBLS];
+
+  /* It's important not to apply jpeg_gen_optimal_table more than once
+   * per table, because it clobbers the input frequency counts!
+   */
+  MEMZERO(did_dc, sizeof(did_dc));
+  MEMZERO(did_ac, sizeof(did_ac));
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    dctbl = compptr->dc_tbl_no;
+    actbl = compptr->ac_tbl_no;
+    if (! did_dc[dctbl]) {
+      htblptr = & cinfo->dc_huff_tbl_ptrs[dctbl];
+      if (*htblptr == NULL)
+        *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+      jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[dctbl]);
+      did_dc[dctbl] = TRUE;
+    }
+    if (! did_ac[actbl]) {
+      htblptr = & cinfo->ac_huff_tbl_ptrs[actbl];
+      if (*htblptr == NULL)
+        *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+      jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[actbl]);
+      did_ac[actbl] = TRUE;
+    }
+  }
+}
+
+
+#endif /* ENTROPY_OPT_SUPPORTED */
+
+
+/*
+ * Module initialization routine for Huffman entropy encoding.
+ */
+
+GLOBAL(void)
+jinit_huff_encoder (j_compress_ptr cinfo)
+{
+  huff_entropy_ptr entropy;
+  int i;
+
+  entropy = (huff_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+                                sizeof(huff_entropy_encoder));
+  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+  entropy->pub.start_pass = start_pass_huff;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
+#ifdef ENTROPY_OPT_SUPPORTED
+    entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL;
+#endif
+  }
+}