Move aom source to a sub-directory under media/libaom

There is no damned reason to treat this differently than any other media lib given its license and there never was.

1 files changed, 1198 insertions, 0 deletions

diff --git a/media/libaom/src/aom/aomcx.h b/media/libaom/src/aom/aomcx.h
new file mode 100644
index 000000000..013ddf57e
--- /dev/null
+++ b/media/libaom/src/aom/aomcx.h
@@ -0,0 +1,1198 @@
+/*
+ * Copyright (c) 2016, Alliance for Open Media. All rights reserved
+ *
+ * This source code is subject to the terms of the BSD 2 Clause License and
+ * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
+ * was not distributed with this source code in the LICENSE file, you can
+ * obtain it at www.aomedia.org/license/software. If the Alliance for Open
+ * Media Patent License 1.0 was not distributed with this source code in the
+ * PATENTS file, you can obtain it at www.aomedia.org/license/patent.
+ */
+#ifndef AOM_AOM_AOMCX_H_
+#define AOM_AOM_AOMCX_H_
+
+/*!\defgroup aom_encoder AOMedia AOM/AV1 Encoder
+ * \ingroup aom
+ *
+ * @{
+ */
+#include "aom/aom.h"
+#include "aom/aom_encoder.h"
+
+/*!\file
+ * \brief Provides definitions for using AOM or AV1 encoder algorithm within the
+ *        aom Codec Interface.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*!\name Algorithm interface for AV1
+ *
+ * This interface provides the capability to encode raw AV1 streams.
+ * @{
+ */
+extern aom_codec_iface_t aom_codec_av1_cx_algo;
+extern aom_codec_iface_t *aom_codec_av1_cx(void);
+/*!@} - end algorithm interface member group*/
+
+/*
+ * Algorithm Flags
+ */
+
+/*!\brief Don't reference the last frame
+ *
+ * When this flag is set, the encoder will not use the last frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * last frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_LAST (1 << 16)
+/*!\brief Don't reference the last2 frame
+ *
+ * When this flag is set, the encoder will not use the last2 frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * last2 frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_LAST2 (1 << 17)
+/*!\brief Don't reference the last3 frame
+ *
+ * When this flag is set, the encoder will not use the last3 frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * last3 frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_LAST3 (1 << 18)
+/*!\brief Don't reference the golden frame
+ *
+ * When this flag is set, the encoder will not use the golden frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * golden frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_GF (1 << 19)
+
+/*!\brief Don't reference the alternate reference frame
+ *
+ * When this flag is set, the encoder will not use the alt ref frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * alt ref frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_ARF (1 << 20)
+/*!\brief Don't reference the bwd reference frame
+ *
+ * When this flag is set, the encoder will not use the bwd ref frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * bwd ref frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_BWD (1 << 21)
+/*!\brief Don't reference the alt2 reference frame
+ *
+ * When this flag is set, the encoder will not use the alt2 ref frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * alt2 ref frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_ARF2 (1 << 22)
+
+/*!\brief Don't update the last frame
+ *
+ * When this flag is set, the encoder will not update the last frame with
+ * the contents of the current frame.
+ */
+#define AOM_EFLAG_NO_UPD_LAST (1 << 23)
+
+/*!\brief Don't update the golden frame
+ *
+ * When this flag is set, the encoder will not update the golden frame with
+ * the contents of the current frame.
+ */
+#define AOM_EFLAG_NO_UPD_GF (1 << 24)
+
+/*!\brief Don't update the alternate reference frame
+ *
+ * When this flag is set, the encoder will not update the alt ref frame with
+ * the contents of the current frame.
+ */
+#define AOM_EFLAG_NO_UPD_ARF (1 << 25)
+/*!\brief Disable entropy update
+ *
+ * When this flag is set, the encoder will not update its internal entropy
+ * model based on the entropy of this frame.
+ */
+#define AOM_EFLAG_NO_UPD_ENTROPY (1 << 26)
+/*!\brief Disable ref frame mvs
+ *
+ * When this flag is set, the encoder will not allow frames to
+ * be encoded using mfmv.
+ */
+#define AOM_EFLAG_NO_REF_FRAME_MVS (1 << 27)
+/*!\brief Enable error resilient frame
+ *
+ * When this flag is set, the encoder will code frames as error
+ * resilient.
+ */
+#define AOM_EFLAG_ERROR_RESILIENT (1 << 28)
+/*!\brief Enable s frame mode
+ *
+ * When this flag is set, the encoder will code frames as an
+ * s frame.
+ */
+#define AOM_EFLAG_SET_S_FRAME (1 << 29)
+/*!\brief Force primary_ref_frame to PRIMARY_REF_NONE
+ *
+ * When this flag is set, the encoder will set a frame's primary_ref_frame
+ * to PRIMARY_REF_NONE
+ */
+#define AOM_EFLAG_SET_PRIMARY_REF_NONE (1 << 30)
+
+/*!\brief AVx encoder control functions
+ *
+ * This set of macros define the control functions available for AVx
+ * encoder interface.
+ *
+ * \sa #aom_codec_control
+ */
+enum aome_enc_control_id {
+  /*!\brief Codec control function to set which reference frame encoder can use.
+   */
+  AOME_USE_REFERENCE = 7,
+
+  /*!\brief Codec control function to pass an ROI map to encoder.
+   */
+  AOME_SET_ROI_MAP = 8,
+
+  /*!\brief Codec control function to pass an Active map to encoder.
+   */
+  AOME_SET_ACTIVEMAP,
+
+  /*!\brief Codec control function to set encoder scaling mode.
+   */
+  AOME_SET_SCALEMODE = 11,
+
+  /*!\brief Codec control function to set encoder spatial layer id.
+   */
+  AOME_SET_SPATIAL_LAYER_ID = 12,
+
+  /*!\brief Codec control function to set encoder internal speed settings.
+   *
+   * Changes in this value influences, among others, the encoder's selection
+   * of motion estimation methods. Values greater than 0 will increase encoder
+   * speed at the expense of quality.
+   *
+   * \note Valid range: 0..8
+   */
+  AOME_SET_CPUUSED = 13,
+
+  /*!\brief Codec control function to enable automatic set and use alf frames.
+   */
+  AOME_SET_ENABLEAUTOALTREF,
+
+  /*!\brief Codec control function to set sharpness.
+   */
+  AOME_SET_SHARPNESS = AOME_SET_ENABLEAUTOALTREF + 2,
+
+  /*!\brief Codec control function to set the threshold for MBs treated static.
+   */
+  AOME_SET_STATIC_THRESHOLD,
+
+  /*!\brief Codec control function to get last quantizer chosen by the encoder.
+   *
+   * Return value uses internal quantizer scale defined by the codec.
+   */
+  AOME_GET_LAST_QUANTIZER = AOME_SET_STATIC_THRESHOLD + 2,
+
+  /*!\brief Codec control function to get last quantizer chosen by the encoder.
+   *
+   * Return value uses the 0..63 scale as used by the rc_*_quantizer config
+   * parameters.
+   */
+  AOME_GET_LAST_QUANTIZER_64,
+
+  /*!\brief Codec control function to set the max no of frames to create arf.
+   */
+  AOME_SET_ARNR_MAXFRAMES,
+
+  /*!\brief Codec control function to set the filter strength for the arf.
+   */
+  AOME_SET_ARNR_STRENGTH,
+
+  /*!\brief Codec control function to set visual tuning.
+   */
+  AOME_SET_TUNING = AOME_SET_ARNR_STRENGTH + 2,
+
+  /*!\brief Codec control function to set constrained quality level.
+   *
+   * \attention For this value to be used aom_codec_enc_cfg_t::g_usage must be
+   *            set to #AOM_CQ.
+   * \note Valid range: 0..63
+   */
+  AOME_SET_CQ_LEVEL,
+
+  /*!\brief Codec control function to set Max data rate for Intra frames.
+   *
+   * This value controls additional clamping on the maximum size of a
+   * keyframe. It is expressed as a percentage of the average
+   * per-frame bitrate, with the special (and default) value 0 meaning
+   * unlimited, or no additional clamping beyond the codec's built-in
+   * algorithm.
+   *
+   * For example, to allocate no more than 4.5 frames worth of bitrate
+   * to a keyframe, set this to 450.
+   */
+  AOME_SET_MAX_INTRA_BITRATE_PCT,
+
+  /*!\brief Codec control function to set number of spatial layers.
+   */
+  AOME_SET_NUMBER_SPATIAL_LAYERS,
+
+  /*!\brief Codec control function to set max data rate for Inter frames.
+   *
+   * This value controls additional clamping on the maximum size of an
+   * inter frame. It is expressed as a percentage of the average
+   * per-frame bitrate, with the special (and default) value 0 meaning
+   * unlimited, or no additional clamping beyond the codec's built-in
+   * algorithm.
+   *
+   * For example, to allow no more than 4.5 frames worth of bitrate
+   * to an inter frame, set this to 450.
+   */
+  AV1E_SET_MAX_INTER_BITRATE_PCT = AOME_SET_MAX_INTRA_BITRATE_PCT + 2,
+
+  /*!\brief Boost percentage for Golden Frame in CBR mode.
+   *
+   * This value controls the amount of boost given to Golden Frame in
+   * CBR mode. It is expressed as a percentage of the average
+   * per-frame bitrate, with the special (and default) value 0 meaning
+   * the feature is off, i.e., no golden frame boost in CBR mode and
+   * average bitrate target is used.
+   *
+   * For example, to allow 100% more bits, i.e, 2X, in a golden frame
+   * than average frame, set this to 100.
+   */
+  AV1E_SET_GF_CBR_BOOST_PCT,
+
+  /*!\brief Codec control function to set lossless encoding mode.
+   *
+   * AV1 can operate in lossless encoding mode, in which the bitstream
+   * produced will be able to decode and reconstruct a perfect copy of
+   * input source. This control function provides a mean to switch encoder
+   * into lossless coding mode(1) or normal coding mode(0) that may be lossy.
+   *                          0 = lossy coding mode
+   *                          1 = lossless coding mode
+   *
+   *  By default, encoder operates in normal coding mode (maybe lossy).
+   */
+  AV1E_SET_LOSSLESS = AV1E_SET_GF_CBR_BOOST_PCT + 2,
+
+  /** control function to enable the row based multi-threading of encoder. A
+   * value that is equal to 1 indicates that row based multi-threading is
+   * enabled.
+   */
+  AV1E_SET_ROW_MT,
+
+  /*!\brief Codec control function to set number of tile columns.
+   *
+   * In encoding and decoding, AV1 allows an input image frame be partitioned
+   * into separate vertical tile columns, which can be encoded or decoded
+   * independently. This enables easy implementation of parallel encoding and
+   * decoding. The parameter for this control describes the number of tile
+   * columns (in log2 units), which has a valid range of [0, 6]:
+   *             0 = 1 tile column
+   *             1 = 2 tile columns
+   *             2 = 4 tile columns
+   *             .....
+   *             n = 2**n tile columns
+   * The requested tile columns will be capped by encoder based on image size
+   * limitation (The minimum width of a tile column is 256 pixel, the maximum
+   * is 4096).
+   *
+   * By default, the value is 0, i.e. one single column tile for entire image.
+   */
+  AV1E_SET_TILE_COLUMNS,
+
+  /*!\brief Codec control function to set number of tile rows.
+   *
+   * In encoding and decoding, AV1 allows an input image frame be partitioned
+   * into separate horizontal tile rows, which can be encoded or decoded
+   * independently. The parameter for this control describes the number of tile
+   * rows (in log2 units), which has a valid range of [0, 6]:
+   *            0 = 1 tile row
+   *            1 = 2 tile rows
+   *            2 = 4 tile rows
+   *            .....
+   *            n = 2**n tile rows
+   *
+   * By default, the value is 0, i.e. one single row tile for entire image.
+   */
+  AV1E_SET_TILE_ROWS,
+
+  /*!\brief Codec control function to enable frame parallel decoding feature.
+   *
+   * AV1 has a bitstream feature to reduce decoding dependency between frames
+   * by turning off backward update of probability context used in encoding
+   * and decoding. This allows staged parallel processing of more than one
+   * video frames in the decoder. This control function provides a mean to
+   * turn this feature on or off for bitstreams produced by encoder.
+   *
+   * By default, this feature is off.
+   */
+  AV1E_SET_FRAME_PARALLEL_DECODING,
+
+  /*!\brief Codec control function to enable error_resilient_mode
+   *
+   * AV1 has a bitstream feature to guarantee parseability of a frame
+   * by turning on the error_resilient_decoding mode, even though the
+   * reference buffers are unreliable or not received.
+   *
+   * By default, this feature is off.
+   */
+  AV1E_SET_ERROR_RESILIENT_MODE,
+
+  /*!\brief Codec control function to enable s_frame_mode
+   *
+   * AV1 has a bitstream feature to designate certain frames as S-frames,
+   * from where we can switch to a different stream,
+   * even though the reference buffers may not be exactly identical.
+   *
+   * By default, this feature is off.
+   */
+  AV1E_SET_S_FRAME_MODE,
+
+  /*!\brief Codec control function to set adaptive quantization mode.
+   *
+   * AV1 has a segment based feature that allows encoder to adaptively change
+   * quantization parameter for each segment within a frame to improve the
+   * subjective quality. This control makes encoder operate in one of the
+   * several AQ_modes supported.
+   *
+   * By default, encoder operates with AQ_Mode 0(adaptive quantization off).
+   */
+  AV1E_SET_AQ_MODE,
+
+  /*!\brief Codec control function to enable/disable periodic Q boost.
+   *
+   * One AV1 encoder speed feature is to enable quality boost by lowering
+   * frame level Q periodically. This control function provides a mean to
+   * turn on/off this feature.
+   *               0 = off
+   *               1 = on
+   *
+   * By default, the encoder is allowed to use this feature for appropriate
+   * encoding modes.
+   */
+  AV1E_SET_FRAME_PERIODIC_BOOST,
+
+  /*!\brief Codec control function to set noise sensitivity.
+   *
+   *  0: off, 1: On(YOnly)
+   */
+  AV1E_SET_NOISE_SENSITIVITY,
+
+  /*!\brief Codec control function to set content type.
+   * \note Valid parameter range:
+   *              AOM_CONTENT_DEFAULT = Regular video content (Default)
+   *              AOM_CONTENT_SCREEN  = Screen capture content
+   */
+  AV1E_SET_TUNE_CONTENT,
+
+  /*!\brief Codec control function to set CDF update mode.
+   *
+   *  0: no update          1: update on every frame
+   *  2: selectively update
+   */
+  AV1E_SET_CDF_UPDATE_MODE,
+
+  /*!\brief Codec control function to set color space info.
+   * \note Valid ranges: 0..23, default is "Unspecified".
+   *                     0 = For future use
+   *                     1 = BT.709
+   *                     2 = Unspecified
+   *                     3 = For future use
+   *                     4 = BT.470 System M (historical)
+   *                     5 = BT.470 System B, G (historical)
+   *                     6 = BT.601
+   *                     7 = SMPTE 240
+   *                     8 = Generic film (color filters using illuminant C)
+   *                     9 = BT.2020, BT.2100
+   *                     10 = SMPTE 428 (CIE 1921 XYZ)
+   *                     11 = SMPTE RP 431-2
+   *                     12 = SMPTE EG 432-1
+   *                     13 = For future use (values 13 - 21)
+   *                     22 = EBU Tech. 3213-E
+   *                     23 = For future use
+   *
+   */
+  AV1E_SET_COLOR_PRIMARIES,
+
+  /*!\brief Codec control function to set transfer function info.
+   * \note Valid ranges: 0..19, default is "Unspecified".
+   *                     0 = For future use
+   *                     1 = BT.709
+   *                     2 = Unspecified
+   *                     3 = For future use
+   *                     4 = BT.470 System M (historical)
+   *                     5 = BT.470 System B, G (historical)
+   *                     6 = BT.601
+   *                     7 = SMPTE 240 M
+   *                     8 = Linear
+   *                     9 = Logarithmic (100 : 1 range)
+   *                     10 = Logarithmic (100 * Sqrt(10) : 1 range)
+   *                     11 = IEC 61966-2-4
+   *                     12 = BT.1361
+   *                     13 = sRGB or sYCC
+   *                     14 = BT.2020 10-bit systems
+   *                     15 = BT.2020 12-bit systems
+   *                     16 = SMPTE ST 2084, ITU BT.2100 PQ
+   *                     17 = SMPTE ST 428
+   *                     18 = BT.2100 HLG, ARIB STD-B67
+   *                     19 = For future use
+   *
+   */
+  AV1E_SET_TRANSFER_CHARACTERISTICS,
+
+  /*!\brief Codec control function to set transfer function info.
+   * \note Valid ranges: 0..15, default is "Unspecified".
+   *                     0 = Identity matrix
+   *                     1 = BT.709
+   *                     2 = Unspecified
+   *                     3 = For future use
+   *                     4 = US FCC 73.628
+   *                     5 = BT.470 System B, G (historical)
+   *                     6 = BT.601
+   *                     7 = SMPTE 240 M
+   *                     8 = YCgCo
+   *                     9 = BT.2020 non-constant luminance, BT.2100 YCbCr
+   *                     10 = BT.2020 constant luminance
+   *                     11 = SMPTE ST 2085 YDzDx
+   *                     12 = Chromaticity-derived non-constant luminance
+   *                     13 = Chromaticity-derived constant luminance
+   *                     14 = BT.2100 ICtCp
+   *                     15 = For future use
+   *
+   */
+  AV1E_SET_MATRIX_COEFFICIENTS,
+
+  /*!\brief Codec control function to set chroma 4:2:0 sample position info.
+   * \note Valid ranges: 0..3, default is "UNKNOWN".
+   *                     0 = UNKNOWN,
+   *                     1 = VERTICAL
+   *                     2 = COLOCATED
+   *                     3 = RESERVED
+   */
+  AV1E_SET_CHROMA_SAMPLE_POSITION,
+
+  /*!\brief Codec control function to set minimum interval between GF/ARF frames
+   *
+   * By default the value is set as 4.
+   */
+  AV1E_SET_MIN_GF_INTERVAL,
+
+  /*!\brief Codec control function to set minimum interval between GF/ARF frames
+   *
+   * By default the value is set as 16.
+   */
+  AV1E_SET_MAX_GF_INTERVAL,
+
+  /*!\brief Codec control function to get an Active map back from the encoder.
+   */
+  AV1E_GET_ACTIVEMAP,
+
+  /*!\brief Codec control function to set color range bit.
+   * \note Valid ranges: 0..1, default is 0
+   *                     0 = Limited range (16..235 or HBD equivalent)
+   *                     1 = Full range (0..255 or HBD equivalent)
+   */
+  AV1E_SET_COLOR_RANGE,
+
+  /*!\brief Codec control function to set intended rendering image size.
+   *
+   * By default, this is identical to the image size in pixels.
+   */
+  AV1E_SET_RENDER_SIZE,
+
+  /*!\brief Codec control function to set target level.
+   *
+   * 255: off (default); 0: only keep level stats; 10: target for level 1.0;
+   * 11: target for level 1.1; ... 62: target for level 6.2
+   */
+  AV1E_SET_TARGET_LEVEL,
+
+  /*!\brief Codec control function to get bitstream level.
+   */
+  AV1E_GET_LEVEL,
+
+  /*!\brief Codec control function to set intended superblock size.
+   *
+   * By default, the superblock size is determined separately for each
+   * frame by the encoder.
+   *
+   * Experiment: EXT_PARTITION
+   */
+  AV1E_SET_SUPERBLOCK_SIZE,
+
+  /*!\brief Codec control function to enable automatic set and use
+   * bwd-pred frames.
+   *
+   */
+  AOME_SET_ENABLEAUTOBWDREF,
+
+  /*!\brief Codec control function to encode with CDEF.
+   *
+   * CDEF is the constrained directional enhancement filter which is an
+   * in-loop filter aiming to remove coding artifacts
+   *                          0 = do not apply CDEF
+   *                          1 = apply CDEF
+   *
+   *  By default, the encoder applies CDEF.
+   *
+   * Experiment: AOM_CDEF
+   */
+  AV1E_SET_ENABLE_CDEF,
+
+  /*!\brief Codec control function to encode with Loop Restoration Filter.
+   *
+   *                          0 = do not apply Restoration Filter
+   *                          1 = apply Restoration Filter
+   *
+   *  By default, the encoder applies Restoration Filter.
+   *
+   */
+  AV1E_SET_ENABLE_RESTORATION,
+
+  /*!\brief Codec control function to encode without trellis quantization.
+   *
+   *                          0 = apply trellis quantization
+   *                          1 = do not apply trellis quantization
+   *
+   *  By default, the encoder applies trellis optimization on quantized
+   *  coefficients.
+   *
+   */
+  AV1E_SET_DISABLE_TRELLIS_QUANT,
+
+  /*!\brief Codec control function to encode with quantisation matrices.
+   *
+   * AOM can operate with default quantisation matrices dependent on
+   * quantisation level and block type.
+   *                          0 = do not use quantisation matrices
+   *                          1 = use quantisation matrices
+   *
+   *  By default, the encoder operates without quantisation matrices.
+   *
+   * Experiment: AOM_QM
+   */
+
+  AV1E_SET_ENABLE_QM,
+
+  /*!\brief Codec control function to set the min quant matrix flatness.
+   *
+   * AOM can operate with different ranges of quantisation matrices.
+   * As quantisation levels increase, the matrices get flatter. This
+   * control sets the minimum level of flatness from which the matrices
+   * are determined.
+   *
+   *  By default, the encoder sets this minimum at half the available
+   *  range.
+   *
+   * Experiment: AOM_QM
+   */
+  AV1E_SET_QM_MIN,
+
+  /*!\brief Codec control function to set the max quant matrix flatness.
+   *
+   * AOM can operate with different ranges of quantisation matrices.
+   * As quantisation levels increase, the matrices get flatter. This
+   * control sets the maximum level of flatness possible.
+   *
+   * By default, the encoder sets this maximum at the top of the
+   * available range.
+   *
+   * Experiment: AOM_QM
+   */
+  AV1E_SET_QM_MAX,
+
+  /*!\brief Codec control function to set the min quant matrix flatness.
+   *
+   * AOM can operate with different ranges of quantisation matrices.
+   * As quantisation levels increase, the matrices get flatter. This
+   * control sets the flatness for luma (Y).
+   *
+   *  By default, the encoder sets this minimum at half the available
+   *  range.
+   *
+   * Experiment: AOM_QM
+   */
+  AV1E_SET_QM_Y,
+
+  /*!\brief Codec control function to set the min quant matrix flatness.
+   *
+   * AOM can operate with different ranges of quantisation matrices.
+   * As quantisation levels increase, the matrices get flatter. This
+   * control sets the flatness for chroma (U).
+   *
+   *  By default, the encoder sets this minimum at half the available
+   *  range.
+   *
+   * Experiment: AOM_QM
+   */
+  AV1E_SET_QM_U,
+
+  /*!\brief Codec control function to set the min quant matrix flatness.
+   *
+   * AOM can operate with different ranges of quantisation matrices.
+   * As quantisation levels increase, the matrices get flatter. This
+   * control sets the flatness for chrome (V).
+   *
+   *  By default, the encoder sets this minimum at half the available
+   *  range.
+   *
+   * Experiment: AOM_QM
+   */
+  AV1E_SET_QM_V,
+
+  /*!\brief Codec control function to encode with dist_8x8.
+   *
+   *  The dist_8x8 is enabled automatically for model tuning parameters that
+   *  require measuring distortion at the 8x8 level. This control also allows
+   *  measuring distortion at the 8x8 level for other tuning options
+   *  (e.g., PSNR), for testing purposes.
+   *                          0 = do not use dist_8x8
+   *                          1 = use dist_8x8
+   *
+   *  By default, the encoder does not use dist_8x8
+   *
+   * Experiment: DIST_8X8
+   */
+  AV1E_SET_ENABLE_DIST_8X8,
+
+  /*!\brief Codec control function to set a maximum number of tile groups.
+   *
+   * This will set the maximum number of tile groups. This will be
+   * overridden if an MTU size is set. The default value is 1.
+   *
+   * Experiment: TILE_GROUPS
+   */
+  AV1E_SET_NUM_TG,
+
+  /*!\brief Codec control function to set an MTU size for a tile group.
+   *
+   * This will set the maximum number of bytes in a tile group. This can be
+   * exceeded only if a single tile is larger than this amount.
+   *
+   * By default, the value is 0, in which case a fixed number of tile groups
+   * is used.
+   *
+   * Experiment: TILE_GROUPS
+   */
+  AV1E_SET_MTU,
+
+  /*!\brief Codec control function to set dependent_horz_tiles.
+   *
+   * In encoding and decoding, AV1 allows enabling dependent horizontal tile
+   * The parameter for this control describes the value of this flag,
+   * which has a valid range [0, 1]:
+   *            0 = disable dependent horizontal tile
+   *            1 = enable dependent horizontal tile,
+   *
+   * By default, the value is 0, i.e. disable dependent horizontal tile.
+   */
+  AV1E_SET_TILE_DEPENDENT_ROWS,
+
+  /*!\brief Codec control function to set the number of symbols in an ANS data
+   * window.
+   *
+   * The number of ANS symbols (both boolean and non-booleans alphabets) in an
+   * ANS data window is set to 1 << value.
+   *
+   * \note Valid range: [8, 23]
+   *
+   * Experiment: ANS
+   */
+  AV1E_SET_ANS_WINDOW_SIZE_LOG2,
+
+  /*!\brief Codec control function to turn on / off dual filter
+   * enabling/disabling.
+   *
+   * This will enable or disable dual filter. The default value is 1
+   *
+   */
+  AV1E_SET_ENABLE_DF,
+
+  /*!\brief Codec control function to turn on / off frame order hint for a
+   * few tools:
+   *
+   * joint compound mode
+   * motion field motion vector
+   * ref frame sign bias
+   *
+   * The default value is 1.
+   *
+   */
+  AV1E_SET_ENABLE_ORDER_HINT,
+
+  /*!\brief Codec control function to turn on / off joint compound mode
+   * at sequence level.
+   *
+   * This will enable or disable joint compound mode. The default value is 1.
+   * If AV1E_SET_ENABLE_ORDER_HINT is 0, then this flag is forced to 0.
+   *
+   */
+  AV1E_SET_ENABLE_JNT_COMP,
+
+  /*!\brief Codec control function to turn on / off ref frame mvs (mfmv) usage
+   * at sequence level.
+   *
+   * This will enable or disable usage of MFMV. The default value is 1.
+   * If AV1E_SET_ENABLE_ORDER_HINT is 0, then this flag is forced to 0.
+   *
+   */
+  AV1E_SET_ENABLE_REF_FRAME_MVS,
+
+  /*!\brief Codec control function to set temporal mv prediction
+   * enabling/disabling at frame level.
+   *
+   * This will enable or disable temporal mv predicton. The default value is 1.
+   * If AV1E_SET_ENABLE_REF_FRAME_MVS is 0, then this flag is forced to 0.
+   *
+   */
+  AV1E_SET_ALLOW_REF_FRAME_MVS,
+
+  /*!\brief Codec control function to turn on / off warped motion usage
+   * at sequence level.
+   *
+   * This will enable or disable usage of warped motion. The default value is 1.
+   *
+   */
+  AV1E_SET_ENABLE_WARPED_MOTION,
+
+  /*!\brief Codec control function to turn on / off warped motion usage
+   * at frame level.
+   *
+   * This will enable or disable usage of warped motion. The default value is 1.
+   * If AV1E_SET_ENABLE_WARPED_MOTION is 0, then this flag is forced to 0.
+   *
+   */
+  AV1E_SET_ALLOW_WARPED_MOTION,
+
+  /*!\brief Codec control function to turn on / off frame superresolution.
+   *
+   * This will enable or disable frame superresolution. The default value is 1
+   * If AV1E_SET_ENABLE_SUPERRES is 0, then this flag is forced to 0.
+   */
+  AV1E_SET_ENABLE_SUPERRES,
+
+  /*!\brief Codec control function to set loop_filter_across_tiles_v_enabled
+   * and loop_filter_across_tiles_h_enabled.
+   * In encoding and decoding, AV1 allows disabling loop filter across tile
+   * boundary The parameter for this control describes the value of this flag,
+   * which has a valid range [0, 1]:
+   *            0 = disable loop filter across tile boundary
+   *            1 = enable loop filter across tile boundary
+   *
+   * By default, the value is 1, i.e. enable loop filter across tile boundary.
+   *
+   * Experiment: LOOPFILTERING_ACROSS_TILES_EXT
+   */
+  AV1E_SET_TILE_LOOPFILTER_V,
+  AV1E_SET_TILE_LOOPFILTER_H,
+
+  /*!\brief Codec control function to set loop_filter_across_tiles_enabled.
+   *
+   * In encoding and decoding, AV1 allows disabling loop filter across tile
+   * boundary The parameter for this control describes the value of this flag,
+   * which has a valid range [0, 1]:
+   *            0 = disable loop filter across tile boundary
+   *            1 = enable loop filter across tile boundary
+   *
+   * By default, the value is 1, i.e. enable loop filter across tile boundary.
+   *
+   * Experiment: LOOPFILTERING_ACROSS_TILES
+   */
+  AV1E_SET_TILE_LOOPFILTER,
+
+  /*!\brief Codec control function to set the delta q mode
+   *
+   * AV1 has a segment based feature that allows encoder to adaptively change
+   * quantization parameter for each segment within a frame to improve the
+   * subjective quality. the delta q mode is added on top of segment based
+   * feature, and allows control per 64x64 q and lf delta.This control makes
+   * encoder operate in one of the several DELTA_Q_modes supported.
+   *
+   * By default, encoder operates with DELTAQ_Mode 0(deltaq signaling off).
+   */
+  AV1E_SET_DELTAQ_MODE,
+
+  /*!\brief Codec control function to set the single tile decoding mode to 0 or
+   * 1.
+   *
+   * 0 means that the single tile decoding is off, and 1 means that the single
+   * tile decoding is on.
+   *
+   * Experiment: EXT_TILE
+   */
+  AV1E_SET_SINGLE_TILE_DECODING,
+
+  /*!\brief Codec control function to enable the extreme motion vector unit test
+   * in AV1. Please note that this is only used in motion vector unit test.
+   *
+   * 0 : off, 1 : MAX_EXTREME_MV, 2 : MIN_EXTREME_MV
+   */
+  AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST,
+
+  /*!\brief Codec control function to signal picture timing info in the
+   * bitstream. \note Valid ranges: 0..1, default is "UNKNOWN". 0 = UNKNOWN, 1 =
+   * EQUAL
+   */
+  AV1E_SET_TIMING_INFO_TYPE,
+
+  /*!\brief Codec control function to add film grain parameters (one of several
+   * preset types) info in the bitstream.
+   * \note Valid ranges: 0..11, default is "0". 0 = UNKNOWN,
+   * 1..16 = different test vectors for grain
+   */
+  AV1E_SET_FILM_GRAIN_TEST_VECTOR,
+
+  /*!\brief Codec control function to set the path to the film grain parameters
+   */
+  AV1E_SET_FILM_GRAIN_TABLE,
+
+  /*!\brief Sets the noise level */
+  AV1E_SET_DENOISE_NOISE_LEVEL,
+
+  /*!\brief Sets the denoisers block size */
+  AV1E_SET_DENOISE_BLOCK_SIZE,
+
+  /*!\brief Sets the chroma subsampling x value */
+  AV1E_SET_CHROMA_SUBSAMPLING_X,
+
+  /*!\brief Sets the chroma subsampling y value */
+  AV1E_SET_CHROMA_SUBSAMPLING_Y,
+};
+
+/*!\brief aom 1-D scaling mode
+ *
+ * This set of constants define 1-D aom scaling modes
+ */
+typedef enum aom_scaling_mode_1d {
+  AOME_NORMAL = 0,
+  AOME_FOURFIVE = 1,
+  AOME_THREEFIVE = 2,
+  AOME_ONETWO = 3
+} AOM_SCALING_MODE;
+
+/*!\brief Max number of segments
+ *
+ * This is the limit of number of segments allowed within a frame.
+ *
+ * Currently same as "MAX_SEGMENTS" in AV1, the maximum that AV1 supports.
+ *
+ */
+#define AOM_MAX_SEGMENTS 8
+
+/*!\brief  aom region of interest map
+ *
+ * These defines the data structures for the region of interest map
+ *
+ * TODO(yaowu): create a unit test for ROI map related APIs
+ *
+ */
+typedef struct aom_roi_map {
+  /*! An id between 0 and 7 for each 8x8 region within a frame. */
+  unsigned char *roi_map;
+  unsigned int rows;              /**< Number of rows. */
+  unsigned int cols;              /**< Number of columns. */
+  int delta_q[AOM_MAX_SEGMENTS];  /**< Quantizer deltas. */
+  int delta_lf[AOM_MAX_SEGMENTS]; /**< Loop filter deltas. */
+  /*! Static breakout threshold for each segment. */
+  unsigned int static_threshold[AOM_MAX_SEGMENTS];
+} aom_roi_map_t;
+
+/*!\brief  aom active region map
+ *
+ * These defines the data structures for active region map
+ *
+ */
+
+typedef struct aom_active_map {
+  /*!\brief specify an on (1) or off (0) each 16x16 region within a frame */
+  unsigned char *active_map;
+  unsigned int rows; /**< number of rows */
+  unsigned int cols; /**< number of cols */
+} aom_active_map_t;
+
+/*!\brief  aom image scaling mode
+ *
+ * This defines the data structure for image scaling mode
+ *
+ */
+typedef struct aom_scaling_mode {
+  AOM_SCALING_MODE h_scaling_mode; /**< horizontal scaling mode */
+  AOM_SCALING_MODE v_scaling_mode; /**< vertical scaling mode   */
+} aom_scaling_mode_t;
+
+/*!brief AV1 encoder content type */
+typedef enum {
+  AOM_CONTENT_DEFAULT,
+  AOM_CONTENT_SCREEN,
+  AOM_CONTENT_INVALID
+} aom_tune_content;
+
+/*!brief AV1 encoder timing info type signaling */
+typedef enum {
+  AOM_TIMING_UNSPECIFIED,
+  AOM_TIMING_EQUAL,
+  AOM_TIMING_DEC_MODEL
+} aom_timing_info_type_t;
+
+/*!\brief Model tuning parameters
+ *
+ * Changes the encoder to tune for certain types of input material.
+ *
+ */
+typedef enum {
+  AOM_TUNE_PSNR,
+  AOM_TUNE_SSIM,
+  AOM_TUNE_CDEF_DIST,
+  AOM_TUNE_DAALA_DIST
+} aom_tune_metric;
+
+/*!\cond */
+/*!\brief Encoder control function parameter type
+ *
+ * Defines the data types that AOME/AV1E control functions take. Note that
+ * additional common controls are defined in aom.h
+ *
+ */
+
+AOM_CTRL_USE_TYPE(AOME_USE_REFERENCE, int)
+#define AOM_CTRL_AOME_USE_REFERENCE
+AOM_CTRL_USE_TYPE(AOME_SET_ROI_MAP, aom_roi_map_t *)
+#define AOM_CTRL_AOME_SET_ROI_MAP
+AOM_CTRL_USE_TYPE(AOME_SET_ACTIVEMAP, aom_active_map_t *)
+#define AOM_CTRL_AOME_SET_ACTIVEMAP
+AOM_CTRL_USE_TYPE(AOME_SET_SCALEMODE, aom_scaling_mode_t *)
+#define AOM_CTRL_AOME_SET_SCALEMODE
+
+AOM_CTRL_USE_TYPE(AOME_SET_SPATIAL_LAYER_ID, int)
+#define AOM_CTRL_AOME_SET_SPATIAL_LAYER_ID
+
+AOM_CTRL_USE_TYPE(AOME_SET_CPUUSED, int)
+#define AOM_CTRL_AOME_SET_CPUUSED
+AOM_CTRL_USE_TYPE(AOME_SET_DEVSF, int)
+#define AOM_CTRL_AOME_SET_DEVSF
+AOM_CTRL_USE_TYPE(AOME_SET_ENABLEAUTOALTREF, unsigned int)
+#define AOM_CTRL_AOME_SET_ENABLEAUTOALTREF
+
+AOM_CTRL_USE_TYPE(AOME_SET_ENABLEAUTOBWDREF, unsigned int)
+#define AOM_CTRL_AOME_SET_ENABLEAUTOBWDREF
+
+AOM_CTRL_USE_TYPE(AOME_SET_SHARPNESS, unsigned int)
+#define AOM_CTRL_AOME_SET_SHARPNESS
+AOM_CTRL_USE_TYPE(AOME_SET_STATIC_THRESHOLD, unsigned int)
+#define AOM_CTRL_AOME_SET_STATIC_THRESHOLD
+
+AOM_CTRL_USE_TYPE(AOME_SET_ARNR_MAXFRAMES, unsigned int)
+#define AOM_CTRL_AOME_SET_ARNR_MAXFRAMES
+AOM_CTRL_USE_TYPE(AOME_SET_ARNR_STRENGTH, unsigned int)
+#define AOM_CTRL_AOME_SET_ARNR_STRENGTH
+AOM_CTRL_USE_TYPE(AOME_SET_TUNING, int) /* aom_tune_metric */
+#define AOM_CTRL_AOME_SET_TUNING
+AOM_CTRL_USE_TYPE(AOME_SET_CQ_LEVEL, unsigned int)
+#define AOM_CTRL_AOME_SET_CQ_LEVEL
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ROW_MT, int)
+#define AOM_CTRL_AV1E_SET_ROW_MT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TILE_COLUMNS, int)
+#define AOM_CTRL_AV1E_SET_TILE_COLUMNS
+AOM_CTRL_USE_TYPE(AV1E_SET_TILE_ROWS, int)
+#define AOM_CTRL_AV1E_SET_TILE_ROWS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TILE_DEPENDENT_ROWS, int)
+#define AOM_CTRL_AV1E_SET_TILE_DEPENDENT_ROWS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TILE_LOOPFILTER_V, int)
+#define AOM_CTRL_AV1E_SET_TILE_LOOPFILTER_V
+AOM_CTRL_USE_TYPE(AV1E_SET_TILE_LOOPFILTER_H, int)
+#define AOM_CTRL_AV1E_SET_TILE_LOOPFILTER_H
+AOM_CTRL_USE_TYPE(AV1E_SET_TILE_LOOPFILTER, int)
+#define AOM_CTRL_AV1E_SET_TILE_LOOPFILTER
+
+AOM_CTRL_USE_TYPE(AOME_GET_LAST_QUANTIZER, int *)
+#define AOM_CTRL_AOME_GET_LAST_QUANTIZER
+AOM_CTRL_USE_TYPE(AOME_GET_LAST_QUANTIZER_64, int *)
+#define AOM_CTRL_AOME_GET_LAST_QUANTIZER_64
+
+AOM_CTRL_USE_TYPE(AOME_SET_MAX_INTRA_BITRATE_PCT, unsigned int)
+#define AOM_CTRL_AOME_SET_MAX_INTRA_BITRATE_PCT
+AOM_CTRL_USE_TYPE(AOME_SET_MAX_INTER_BITRATE_PCT, unsigned int)
+#define AOM_CTRL_AOME_SET_MAX_INTER_BITRATE_PCT
+
+AOM_CTRL_USE_TYPE(AOME_SET_NUMBER_SPATIAL_LAYERS, int)
+#define AOME_CTRL_AOME_SET_NUMBER_SPATIAL_LAYERS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_GF_CBR_BOOST_PCT, unsigned int)
+#define AOM_CTRL_AV1E_SET_GF_CBR_BOOST_PCT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_LOSSLESS, unsigned int)
+#define AOM_CTRL_AV1E_SET_LOSSLESS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_CDEF, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_CDEF
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_RESTORATION, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_RESTORATION
+
+AOM_CTRL_USE_TYPE(AV1E_SET_DISABLE_TRELLIS_QUANT, unsigned int)
+#define AOM_CTRL_AV1E_SET_DISABLE_TRELLIS_QUANT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_QM, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_QM
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIST_8X8, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_DIST_8X8
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QM_MIN, unsigned int)
+#define AOM_CTRL_AV1E_SET_QM_MIN
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QM_MAX, unsigned int)
+#define AOM_CTRL_AV1E_SET_QM_MAX
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QM_Y, unsigned int)
+#define AOM_CTRL_AV1E_SET_QM_Y
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QM_U, unsigned int)
+#define AOM_CTRL_AV1E_SET_QM_U
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QM_V, unsigned int)
+#define AOM_CTRL_AV1E_SET_QM_V
+
+AOM_CTRL_USE_TYPE(AV1E_SET_NUM_TG, unsigned int)
+#define AOM_CTRL_AV1E_SET_NUM_TG
+AOM_CTRL_USE_TYPE(AV1E_SET_MTU, unsigned int)
+#define AOM_CTRL_AV1E_SET_MTU
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TIMING_INFO_TYPE, aom_timing_info_type_t)
+#define AOM_CTRL_AV1E_SET_TIMING_INFO_TYPE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DF, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_DF
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ORDER_HINT, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_ORDER_HINT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_JNT_COMP, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_JNT_COMP
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_REF_FRAME_MVS, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_REF_FRAME_MVS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ALLOW_REF_FRAME_MVS, unsigned int)
+#define AOM_CTRL_AV1E_SET_ALLOW_REF_FRAME_MVS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_WARPED_MOTION, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_WARPED_MOTION
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ALLOW_WARPED_MOTION, unsigned int)
+#define AOM_CTRL_AV1E_SET_ALLOW_WARPED_MOTION
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_SUPERRES, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_SUPERRES
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FRAME_PARALLEL_DECODING, unsigned int)
+#define AOM_CTRL_AV1E_SET_FRAME_PARALLEL_DECODING
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ERROR_RESILIENT_MODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_ERROR_RESILIENT_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_S_FRAME_MODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_S_FRAME_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_AQ_MODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_AQ_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_DELTAQ_MODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_DELTAQ_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FRAME_PERIODIC_BOOST, unsigned int)
+#define AOM_CTRL_AV1E_SET_FRAME_PERIODIC_BOOST
+
+AOM_CTRL_USE_TYPE(AV1E_SET_NOISE_SENSITIVITY, unsigned int)
+#define AOM_CTRL_AV1E_SET_NOISE_SENSITIVITY
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TUNE_CONTENT, int) /* aom_tune_content */
+#define AOM_CTRL_AV1E_SET_TUNE_CONTENT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_COLOR_PRIMARIES, int)
+#define AOM_CTRL_AV1E_SET_COLOR_PRIMARIES
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TRANSFER_CHARACTERISTICS, int)
+#define AOM_CTRL_AV1E_SET_TRANSFER_CHARACTERISTICS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MATRIX_COEFFICIENTS, int)
+#define AOM_CTRL_AV1E_SET_MATRIX_COEFFICIENTS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SAMPLE_POSITION, int)
+#define AOM_CTRL_AV1E_SET_CHROMA_SAMPLE_POSITION
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MIN_GF_INTERVAL, unsigned int)
+#define AOM_CTRL_AV1E_SET_MIN_GF_INTERVAL
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MAX_GF_INTERVAL, unsigned int)
+#define AOM_CTRL_AV1E_SET_MAX_GF_INTERVAL
+
+AOM_CTRL_USE_TYPE(AV1E_GET_ACTIVEMAP, aom_active_map_t *)
+#define AOM_CTRL_AV1E_GET_ACTIVEMAP
+
+AOM_CTRL_USE_TYPE(AV1E_SET_COLOR_RANGE, int)
+#define AOM_CTRL_AV1E_SET_COLOR_RANGE
+
+#define AOM_CTRL_AV1E_SET_RENDER_SIZE
+AOM_CTRL_USE_TYPE(AV1E_SET_RENDER_SIZE, int *)
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SUPERBLOCK_SIZE, unsigned int)
+#define AOM_CTRL_AV1E_SET_SUPERBLOCK_SIZE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TARGET_LEVEL, unsigned int)
+#define AOM_CTRL_AV1E_SET_TARGET_LEVEL
+
+AOM_CTRL_USE_TYPE(AV1E_GET_LEVEL, int *)
+#define AOM_CTRL_AV1E_GET_LEVEL
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ANS_WINDOW_SIZE_LOG2, unsigned int)
+#define AOM_CTRL_AV1E_SET_ANS_WINDOW_SIZE_LOG2
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SINGLE_TILE_DECODING, unsigned int)
+#define AOM_CTRL_AV1E_SET_SINGLE_TILE_DECODING
+
+AOM_CTRL_USE_TYPE(AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST, unsigned int)
+#define AOM_CTRL_AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FILM_GRAIN_TEST_VECTOR, unsigned int)
+#define AOM_CTRL_AV1E_SET_FILM_GRAIN_TEST_VECTOR
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FILM_GRAIN_TABLE, const char *)
+#define AOM_CTRL_AV1E_SET_FILM_GRAIN_TABLE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_CDF_UPDATE_MODE, int)
+#define AOM_CTRL_AV1E_SET_CDF_UPDATE_MODE
+
+#ifdef CONFIG_DENOISE
+AOM_CTRL_USE_TYPE(AV1E_SET_DENOISE_NOISE_LEVEL, int);
+#define AOM_CTRL_AV1E_SET_DENOISE_NOISE_LEVEL
+
+AOM_CTRL_USE_TYPE(AV1E_SET_DENOISE_BLOCK_SIZE, unsigned int);
+#define AOM_CTRL_AV1E_SET_DENOISE_BLOCK_SIZE
+#endif
+
+AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SUBSAMPLING_X, unsigned int)
+#define AOM_CTRL_AV1E_SET_CHROMA_SUBSAMPLING_X
+
+AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SUBSAMPLING_Y, unsigned int)
+#define AOM_CTRL_AV1E_SET_CHROMA_SUBSAMPLING_Y
+
+/*!\endcond */
+/*! @} - end defgroup aom_encoder */
+#ifdef __cplusplus
+}  // extern "C"
+#endif
+
+#endif  // AOM_AOM_AOMCX_H_