Add m-esr52 at 52.6.0

1 files changed, 382 insertions, 0 deletions

diff --git a/gfx/cairo/libpixman/src/pixman-mips-memcpy-asm.S b/gfx/cairo/libpixman/src/pixman-mips-memcpy-asm.S
new file mode 100644
index 000000000..9ad6da537
--- /dev/null
+++ b/gfx/cairo/libpixman/src/pixman-mips-memcpy-asm.S
@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2012
+ *      MIPS Technologies, Inc., California.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the MIPS Technologies, Inc., nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE MIPS TECHNOLOGIES, INC. ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE MIPS TECHNOLOGIES, INC. BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "pixman-mips-dspr2-asm.h"
+
+/*
+ * This routine could be optimized for MIPS64. The current code only
+ * uses MIPS32 instructions.
+ */
+
+#ifdef EB
+#  define LWHI	lwl		/* high part is left in big-endian */
+#  define SWHI	swl		/* high part is left in big-endian */
+#  define LWLO	lwr		/* low part is right in big-endian */
+#  define SWLO	swr		/* low part is right in big-endian */
+#else
+#  define LWHI	lwr		/* high part is right in little-endian */
+#  define SWHI	swr		/* high part is right in little-endian */
+#  define LWLO	lwl		/* low part is left in big-endian */
+#  define SWLO	swl		/* low part is left in big-endian */
+#endif
+
+LEAF_MIPS32R2(pixman_mips_fast_memcpy)
+
+	slti	AT, a2, 8
+	bne	AT, zero, $last8
+	move	v0, a0	/* memcpy returns the dst pointer */
+
+/* Test if the src and dst are word-aligned, or can be made word-aligned */
+	xor	t8, a1, a0
+	andi	t8, t8, 0x3		/* t8 is a0/a1 word-displacement */
+
+	bne	t8, zero, $unaligned
+	negu	a3, a0
+
+	andi	a3, a3, 0x3	/* we need to copy a3 bytes to make a0/a1 aligned */
+	beq	a3, zero, $chk16w	/* when a3=0 then the dst (a0) is word-aligned */
+	subu	a2, a2, a3	/* now a2 is the remining bytes count */
+
+	LWHI	t8, 0(a1)
+	addu	a1, a1, a3
+	SWHI	t8, 0(a0)
+	addu	a0, a0, a3
+
+/* Now the dst/src are mutually word-aligned with word-aligned addresses */
+$chk16w:	andi	t8, a2, 0x3f	/* any whole 64-byte chunks? */
+				/* t8 is the byte count after 64-byte chunks */
+
+	beq	a2, t8, $chk8w	/* if a2==t8, no 64-byte chunks */
+				/* There will be at most 1 32-byte chunk after it */
+	subu	a3, a2, t8	/* subtract from a2 the reminder */
+                                /* Here a3 counts bytes in 16w chunks */
+	addu	a3, a0, a3	/* Now a3 is the final dst after 64-byte chunks */
+
+	addu	t0, a0, a2	/* t0 is the "past the end" address */
+
+/*
+ * When in the loop we exercise "pref 30, x(a0)", the a0+x should not be past
+ * the "t0-32" address
+ * This means: for x=128 the last "safe" a0 address is "t0-160"
+ * Alternatively, for x=64 the last "safe" a0 address is "t0-96"
+ * In the current version we use "pref 30, 128(a0)", so "t0-160" is the limit
+ */
+	subu	t9, t0, 160	/* t9 is the "last safe pref 30, 128(a0)" address */
+
+	pref    0, 0(a1)		/* bring the first line of src, addr 0 */
+	pref    0, 32(a1)	/* bring the second line of src, addr 32 */
+	pref    0, 64(a1)	/* bring the third line of src, addr 64 */
+	pref	30, 32(a0)	/* safe, as we have at least 64 bytes ahead */
+/* In case the a0 > t9 don't use "pref 30" at all */
+	sgtu	v1, a0, t9
+	bgtz	v1, $loop16w	/* skip "pref 30, 64(a0)" for too short arrays */
+	nop
+/* otherwise, start with using pref30 */
+	pref	30, 64(a0)
+$loop16w:
+	pref	0, 96(a1)
+	lw	t0, 0(a1)
+	bgtz	v1, $skip_pref30_96	/* skip "pref 30, 96(a0)" */
+	lw	t1, 4(a1)
+	pref    30, 96(a0)   /* continue setting up the dest, addr 96 */
+$skip_pref30_96:
+	lw	t2, 8(a1)
+	lw	t3, 12(a1)
+	lw	t4, 16(a1)
+	lw	t5, 20(a1)
+	lw	t6, 24(a1)
+	lw	t7, 28(a1)
+        pref    0, 128(a1)    /* bring the next lines of src, addr 128 */
+
+	sw	t0, 0(a0)
+	sw	t1, 4(a0)
+	sw	t2, 8(a0)
+	sw	t3, 12(a0)
+	sw	t4, 16(a0)
+	sw	t5, 20(a0)
+	sw	t6, 24(a0)
+	sw	t7, 28(a0)
+
+	lw	t0, 32(a1)
+	bgtz	v1, $skip_pref30_128	/* skip "pref 30, 128(a0)" */
+	lw	t1, 36(a1)
+	pref    30, 128(a0)   /* continue setting up the dest, addr 128 */
+$skip_pref30_128:
+	lw	t2, 40(a1)
+	lw	t3, 44(a1)
+	lw	t4, 48(a1)
+	lw	t5, 52(a1)
+	lw	t6, 56(a1)
+	lw	t7, 60(a1)
+        pref    0, 160(a1)    /* bring the next lines of src, addr 160 */
+
+	sw	t0, 32(a0)
+	sw	t1, 36(a0)
+	sw	t2, 40(a0)
+	sw	t3, 44(a0)
+	sw	t4, 48(a0)
+	sw	t5, 52(a0)
+	sw	t6, 56(a0)
+	sw	t7, 60(a0)
+
+	addiu	a0, a0, 64	/* adding 64 to dest */
+	sgtu	v1, a0, t9
+	bne	a0, a3, $loop16w
+	addiu	a1, a1, 64	/* adding 64 to src */
+	move	a2, t8
+
+/* Here we have src and dest word-aligned but less than 64-bytes to go */
+
+$chk8w:
+	pref 0, 0x0(a1)
+	andi	t8, a2, 0x1f	/* is there a 32-byte chunk? */
+				/* the t8 is the reminder count past 32-bytes */
+	beq	a2, t8, $chk1w	/* when a2=t8, no 32-byte chunk */
+	 nop
+
+	lw	t0, 0(a1)
+	lw	t1, 4(a1)
+	lw	t2, 8(a1)
+	lw	t3, 12(a1)
+	lw	t4, 16(a1)
+	lw	t5, 20(a1)
+	lw	t6, 24(a1)
+	lw	t7, 28(a1)
+	addiu	a1, a1, 32
+
+	sw	t0, 0(a0)
+	sw	t1, 4(a0)
+	sw	t2, 8(a0)
+	sw	t3, 12(a0)
+	sw	t4, 16(a0)
+	sw	t5, 20(a0)
+	sw	t6, 24(a0)
+	sw	t7, 28(a0)
+	addiu	a0, a0, 32
+
+$chk1w:
+	andi	a2, t8, 0x3	/* now a2 is the reminder past 1w chunks */
+	beq	a2, t8, $last8
+	subu	a3, t8, a2	/* a3 is count of bytes in 1w chunks */
+	addu	a3, a0, a3	/* now a3 is the dst address past the 1w chunks */
+
+/* copying in words (4-byte chunks) */
+$wordCopy_loop:
+	lw	t3, 0(a1)	/* the first t3 may be equal t0 ... optimize? */
+	addiu	a1, a1, 4
+	addiu	a0, a0, 4
+	bne	a0, a3, $wordCopy_loop
+	sw	t3, -4(a0)
+
+/* For the last (<8) bytes */
+$last8:
+	blez	a2, leave
+	addu	a3, a0, a2	/* a3 is the last dst address */
+$last8loop:
+	lb	v1, 0(a1)
+	addiu	a1, a1, 1
+	addiu	a0, a0, 1
+	bne	a0, a3, $last8loop
+	sb	v1, -1(a0)
+
+leave:	j	ra
+	nop
+
+/*
+ * UNALIGNED case
+ */
+
+$unaligned:
+	/* got here with a3="negu a0" */
+	andi	a3, a3, 0x3	/* test if the a0 is word aligned */
+	beqz	a3, $ua_chk16w
+	subu	a2, a2, a3	/* bytes left after initial a3 bytes */
+
+	LWHI	v1, 0(a1)
+	LWLO	v1, 3(a1)
+	addu	a1, a1, a3	/* a3 may be here 1, 2 or 3 */
+	SWHI	v1, 0(a0)
+	addu	a0, a0, a3	/* below the dst will be word aligned (NOTE1) */
+
+$ua_chk16w:	andi	t8, a2, 0x3f	/* any whole 64-byte chunks? */
+				/* t8 is the byte count after 64-byte chunks */
+	beq	a2, t8, $ua_chk8w	/* if a2==t8, no 64-byte chunks */
+				/* There will be at most 1 32-byte chunk after it */
+	subu	a3, a2, t8	/* subtract from a2 the reminder */
+                                /* Here a3 counts bytes in 16w chunks */
+	addu	a3, a0, a3	/* Now a3 is the final dst after 64-byte chunks */
+
+	addu	t0, a0, a2	/* t0 is the "past the end" address */
+
+	subu	t9, t0, 160	/* t9 is the "last safe pref 30, 128(a0)" address */
+
+	pref    0, 0(a1)		/* bring the first line of src, addr 0 */
+	pref    0, 32(a1)	/* bring the second line of src, addr 32 */
+	pref    0, 64(a1)	/* bring the third line of src, addr 64 */
+	pref	30, 32(a0)	/* safe, as we have at least 64 bytes ahead */
+/* In case the a0 > t9 don't use "pref 30" at all */
+	sgtu	v1, a0, t9
+	bgtz	v1, $ua_loop16w	/* skip "pref 30, 64(a0)" for too short arrays */
+	nop
+/* otherwise,  start with using pref30 */
+	pref	30, 64(a0)
+$ua_loop16w:
+	pref	0, 96(a1)
+	LWHI	t0, 0(a1)
+	LWLO	t0, 3(a1)
+	LWHI	t1, 4(a1)
+	bgtz	v1, $ua_skip_pref30_96
+	LWLO	t1, 7(a1)
+	pref    30, 96(a0)   /* continue setting up the dest, addr 96 */
+$ua_skip_pref30_96:
+	LWHI	t2, 8(a1)
+	LWLO	t2, 11(a1)
+	LWHI	t3, 12(a1)
+	LWLO	t3, 15(a1)
+	LWHI	t4, 16(a1)
+	LWLO	t4, 19(a1)
+	LWHI	t5, 20(a1)
+	LWLO	t5, 23(a1)
+	LWHI	t6, 24(a1)
+	LWLO	t6, 27(a1)
+	LWHI	t7, 28(a1)
+	LWLO	t7, 31(a1)
+        pref    0, 128(a1)    /* bring the next lines of src, addr 128 */
+
+	sw	t0, 0(a0)
+	sw	t1, 4(a0)
+	sw	t2, 8(a0)
+	sw	t3, 12(a0)
+	sw	t4, 16(a0)
+	sw	t5, 20(a0)
+	sw	t6, 24(a0)
+	sw	t7, 28(a0)
+
+	LWHI	t0, 32(a1)
+	LWLO	t0, 35(a1)
+	LWHI	t1, 36(a1)
+	bgtz	v1, $ua_skip_pref30_128
+	LWLO	t1, 39(a1)
+	pref    30, 128(a0)   /* continue setting up the dest, addr 128 */
+$ua_skip_pref30_128:
+	LWHI	t2, 40(a1)
+	LWLO	t2, 43(a1)
+	LWHI	t3, 44(a1)
+	LWLO	t3, 47(a1)
+	LWHI	t4, 48(a1)
+	LWLO	t4, 51(a1)
+	LWHI	t5, 52(a1)
+	LWLO	t5, 55(a1)
+	LWHI	t6, 56(a1)
+	LWLO	t6, 59(a1)
+	LWHI	t7, 60(a1)
+	LWLO	t7, 63(a1)
+        pref    0, 160(a1)    /* bring the next lines of src, addr 160 */
+
+	sw	t0, 32(a0)
+	sw	t1, 36(a0)
+	sw	t2, 40(a0)
+	sw	t3, 44(a0)
+	sw	t4, 48(a0)
+	sw	t5, 52(a0)
+	sw	t6, 56(a0)
+	sw	t7, 60(a0)
+
+	addiu	a0, a0, 64	/* adding 64 to dest */
+	sgtu	v1, a0, t9
+	bne	a0, a3, $ua_loop16w
+	addiu	a1, a1, 64	/* adding 64 to src */
+	move	a2, t8
+
+/* Here we have src and dest word-aligned but less than 64-bytes to go */
+
+$ua_chk8w:
+	pref 0, 0x0(a1)
+	andi	t8, a2, 0x1f	/* is there a 32-byte chunk? */
+				/* the t8 is the reminder count */
+	beq	a2, t8, $ua_chk1w	/* when a2=t8, no 32-byte chunk */
+
+	LWHI	t0, 0(a1)
+	LWLO	t0, 3(a1)
+	LWHI	t1, 4(a1)
+	LWLO	t1, 7(a1)
+	LWHI	t2, 8(a1)
+	LWLO	t2, 11(a1)
+	LWHI	t3, 12(a1)
+	LWLO	t3, 15(a1)
+	LWHI	t4, 16(a1)
+	LWLO	t4, 19(a1)
+	LWHI	t5, 20(a1)
+	LWLO	t5, 23(a1)
+	LWHI	t6, 24(a1)
+	LWLO	t6, 27(a1)
+	LWHI	t7, 28(a1)
+	LWLO	t7, 31(a1)
+	addiu	a1, a1, 32
+
+	sw	t0, 0(a0)
+	sw	t1, 4(a0)
+	sw	t2, 8(a0)
+	sw	t3, 12(a0)
+	sw	t4, 16(a0)
+	sw	t5, 20(a0)
+	sw	t6, 24(a0)
+	sw	t7, 28(a0)
+	addiu	a0, a0, 32
+
+$ua_chk1w:
+	andi	a2, t8, 0x3	/* now a2 is the reminder past 1w chunks */
+	beq	a2, t8, $ua_smallCopy
+	subu	a3, t8, a2	/* a3 is count of bytes in 1w chunks */
+	addu	a3, a0, a3	/* now a3 is the dst address past the 1w chunks */
+
+/* copying in words (4-byte chunks) */
+$ua_wordCopy_loop:
+	LWHI	v1, 0(a1)
+	LWLO	v1, 3(a1)
+	addiu	a1, a1, 4
+	addiu	a0, a0, 4		/* note: dst=a0 is word aligned here, see NOTE1 */
+	bne	a0, a3, $ua_wordCopy_loop
+	sw	v1, -4(a0)
+
+/* Now less than 4 bytes (value in a2) left to copy */
+$ua_smallCopy:
+	beqz	a2, leave
+	addu	a3, a0, a2	/* a3 is the last dst address */
+$ua_smallCopy_loop:
+	lb	v1, 0(a1)
+	addiu	a1, a1, 1
+	addiu	a0, a0, 1
+	bne	a0, a3, $ua_smallCopy_loop
+	sb	v1, -1(a0)
+
+	j	ra
+	nop
+
+END(pixman_mips_fast_memcpy)